can't update to oxygenOS beta 25 or 26 - OnePlus 3 Questions & Answers

hi, i've never had probem updating my phone to oxygenOS. however the last 2 updates won't work : twrp says "zip signature verification failed error installing zip file" and even when i download and launch the OTA it does the same.
do you have an answer that doesn't envolve factory reseting of the phone?

bigben14 said:
hi, i've never had probem updating my phone to oxygenOS. however the last 2 updates won't work : twrp says "zip signature verification failed error installing zip file" and even when i download and launch the OTA it does the same.
do you have an answer that doesn't envolve factory reseting of the phone?
Click to expand...
Click to collapse
And manually re-downloading doesn't solve the issue?

Puddi_Puddin said:
And manually re-downloading doesn't solve the issue?
Click to expand...
Click to collapse
i've tried to download the beta 25 and 26 manually and flashed it with twrp and i've tried to update with the OTA of both version and none of thoses methodes worked

bigben14 said:
i've tried to download the beta 25 and 26 manually and flashed it with twrp and i've tried to update with the OTA of both version and none of thoses methodes worked
Click to expand...
Click to collapse
Make sure you are on the right version of twrp (latest). Take a backup of system and boot, then wipe system and flash the zip and see if it works. If it doesn't just revert system and you are back to normal.

Puddi_Puddin said:
Make sure you are on the right version of twrp (latest). Take a backup of system and boot, then wipe system and flash the zip and see if it works. If it doesn't just revert system and you are back to normal.
Click to expand...
Click to collapse
hi,
i am on the latest version of twrp and i tried what you told me, still doesn't work.
any ideas of the origin of the problem? any other ideas on how to fix it?

bigben14 said:
hi,
i am on the latest version of twrp and i tried what you told me, still doesn't work.
any ideas of the origin of the problem? any other ideas on how to fix it?
Click to expand...
Click to collapse
Perhaps this version requires a clean install? I havent really been on OOS. What is new in Open Beta 25?

Puddi_Puddin said:
Perhaps this version requires a clean install? I havent really been on OOS. What is new in Open Beta 25?
Click to expand...
Click to collapse
the open beta is the oreo one. but i just checked and tried to install some other zips (a bootloader and akt) and the same problem happens

Puddi_Puddin said:
Perhaps this version requires a clean install? I havent really been on OOS. What is new in Open Beta 25?
Click to expand...
Click to collapse
i think that i found the problem, but i have no idea as how to fix it : when i install the rom, the installer tells me : Warning : No file_contexts E3004: This package is for "OnePlus 3" devices;this device is a "".

bigben14 said:
i think that i found the problem, but i have no idea as how to fix it : when i install the rom, the installer tells me : Warning : No file_contexts E3004: This package is for "OnePlus 3" devices;this device is a "".
Click to expand...
Click to collapse
Hmm, try to wipe system and flash the OOS version you are currently on. That should overwrite the system partition and perhaps fix this issue.

Twrp OREO or
https://forum.xda-developers.com/showpost.php?p=74152902&postcount=3504
or
blu spark v.50 by eng stk.
https://forum.xda-developers.com/devdb/project/?id=15934#downloads

Related

[Help Needed] Downloaded, installed OOS 4.0 update but phone still boots to 3.2.8

I was running 3.2.8 as of this morning but decided to go back to stock, so I:
flashed stocked recovery
installed 3.2.8
setup my phone, etc
connected to my vpn
downloaded and installed the update
phone boots to 6.0.1/OOS 3.2.8
I don't get it. Originally I had an issue with the update, it wouldn't install. SO I rebooted to (stock) recovery and wiped cache, rebooted and was able to perform the update. But when the phone rebooted it booted to OOS 3.2.8. WTF?!
Update - it does NOT say update successful, okay so that's a little better. But why the OTA is failing is unknown.
dcdevito said:
Update - it does NOT say update successful, okay so that's a little better. But why the OTA is failing is unknown.
Click to expand...
Click to collapse
Why don't you try installing the update manually?
Formhault said:
Why don't you try installing the update manually?
Click to expand...
Click to collapse
I tried side loading but I get "can't read [filename].Zip"
dcdevito said:
I tried side loading but I get "can't read [filename].Zip"
Click to expand...
Click to collapse
Download the file again. It could be a bad download.
Also, make sure you're using the stock Nougat recovery.
Formhault said:
Download the file again. It could be a bad download.
Also, make sure you're using the stock Nougat recovery.
Click to expand...
Click to collapse
I reinstalled adb drivers and I can at least get the stock recovery to attempt to sideload it, but the install fails like it does from the system updater.
Could be the stock Nougat recovery that I am not using - perhaps I am using an older version - where can I verify the download for that?
For reference this is where I got the stock recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/recovery.img
(Update)
Got it to work - I get a dm-verity error on bootup, did a factory reset after the update but still get the error - but I got it. Thanks for your help, cheers
dcdevito said:
(Update)
Got it to work - I get a dm-verity error on bootup, did a factory reset after the update but still get the error - but I got it. Thanks for your help, cheers
Click to expand...
Click to collapse
How did you get it to work? Just curious.
About the dm-verity error... See this : https://forum.xda-developers.com/oneplus-3t/how-to/how-to-fix-dm-verity-issue-7-0-flashed-t3529680
Edit : whoops, it's for the 3T. Oh well...
Formhault said:
How did you get it to work? Just curious.
About the dm-verity error... See this : https://forum.xda-developers.com/oneplus-3t/how-to/how-to-fix-dm-verity-issue-7-0-flashed-t3529680
Edit : whoops, it's for the 3T. Oh well...
Click to expand...
Click to collapse
I re-downloaded the zip, I just wish I knew if the one I have was the latest version, and thus correct one.
Also, yeah I wish there was a OnePlus 3 Toolkit, not that I mind doing it all manually, I just don't have much time on weekdays to do this.....
dcdevito said:
I re-downloaded the zip, I just wish I knew if the one I have was the latest version, and thus correct one.
Click to expand...
Click to collapse
I see
dcdevito said:
Also, yeah I wish there was a OnePlus 3 Toolkit, not that I mind doing it all manually, I just don't have much time on weekdays to do this.....
Click to expand...
Click to collapse
Well, you missed this
Formhault said:
How did you get it to work? Just curious.
About the dm-verity error... See this : https://forum.xda-developers.com/oneplus-3t/how-to/how-to-fix-dm-verity-issue-7-0-flashed-t3529680
Edit : whoops, it's for the 3T. Oh well...
Click to expand...
Click to collapse
Formhault said:
I see
Well, you missed this
Click to expand...
Click to collapse
Cool, thanks - but I'm assuming this wasn't updated for Nougat, right?
dcdevito said:
Cool, thanks - but I'm assuming this wasn't updated for Nougat, right?
Click to expand...
Click to collapse
I stand correctd - looks like it TWRP and SU were indeed updated

OP3 - Nethunter - "Unpacking boot image failed"

Hi there,
I wanted to install the latest image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP I keep getting the message : "Unpacking boot image failed" in the log screen.
What I did in order:
- Unlock fastboot mode
- Flash TWRP recovery (found on build.nethunter.com/twrp)
- Reboot on TWRP
- Install kernel ( kernel-nethunter-oneplus3-nougat-3.15.4-20170126-2226 )
- Install ROM ( nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604 )
- Reboot
It is when I install the rom that I get the error message "Unpacking boot image failed". Even if at the end it says "install completed - Success", it keep loading (with the nethunter loading screen) indefinitely...
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Aiscargeauh said:
Hi there,
I wanted to install the last image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP (found on build.nethunter.com/twrp) I keep getting the message : "Unpacking boot image failed" in the log screen.
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Click to expand...
Click to collapse
What ROM are you using?
Last time i installed it i was on OOS 3.2.2. You have to flash kernel and then the big file (generic nethunter.....)
Found that in https://forum.xda-developers.com/showpost.php?p=68451978&postcount=6
It worked perfectly but since 3.2.2 i havent touched it again so not sure what rom is compatible atm
fuarkgl3 said:
What ROM are you using?
Click to expand...
Click to collapse
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Aiscargeauh said:
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Click to expand...
Click to collapse
I mean version of OOS, not nethunter overlay. See my screenshot. You have to download one of the following kernels depending if you are on MM or nougat. Flash it before flashing the nethunter overlay
fuarkgl3 said:
I mean version of OOS, not nethunter overlay
Click to expand...
Click to collapse
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Aiscargeauh said:
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Click to expand...
Click to collapse
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
fuarkgl3 said:
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
Click to expand...
Click to collapse
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Aiscargeauh said:
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Click to expand...
Click to collapse
Got it working. Only problem is i dont find the option to enable OTG-USB lol
fuarkgl3 said:
Got it working. Only problem is i dont find the option to enable OTG-USB lol
Click to expand...
Click to collapse
And I'm here sitting with my error and my infinite boot, lol.
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Aiscargeauh said:
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Click to expand...
Click to collapse
Sure. Just give me time to post what i did, currently restoring my nandroid because something went wrong when updating metapackages, so im going to download full version instead of minimal and enable OGT-USB to check if wifite works. I will post the steps asap :good:
meanwhile..... how the **** do i enable usb-otg? i dont find the option in settings/storage/3dot
Good and bad news: OTG does not work (it worked for me on MM) but nethunter runs "well" ... it stucks while rebooting and some weird things more. It runs laggy as well...
Steps and config i have
-Experience ROM v10.1(oos 4.0.2 with some adds) and custom TWRP by blu_spark v14
1-Download these 2 files from https://build.nethunter.com/nightly/3.15.4-20170202-1604/
-kernel-nethunter-oneplus3-nougat-3.15.4-20170202-1604.zip
-nethunter-generic-arm64-kalifs-full-rolling-3.15.4-20170202-1604.zip
2-Reboot to recovery and install nethunter-generic-arm64.....
3-Not sure if you have to reboot and then install kernel but i flashed nethunter+kernel without rebooting to system
4-Reboot to system and open supersu, then open nethunter app and grant superuser permissions
5-Done.
I Dont really know why my external adapter or pendrive are not recognized, because it did in MM with same hardware lol. Maybe now only works with official usb-c adapter, who knows
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Aiscargeauh said:
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Click to expand...
Click to collapse
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
fuarkgl3 said:
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
Click to expand...
Click to collapse
Do you think flashing another ROM before flashing nh-generic will help ?
Aiscargeauh said:
Do you think flashing another ROM before flashing nh-generic will help ?
Click to expand...
Click to collapse
Dont think so. But latest build i installed NH i didnt use arm64 version but armhf. So maybe try what i did but using custom TWRP by blu_spark v14 and armhf.... im not sure
Tested with 2 antennas and result is the same in both (see SS)

Unofficial Lineage 15.1 Rom Update Fails

Anyone on the above rom having trouble with update?? I use the rom updater on the phone and it showed a new update for 8-12-18 I've downloaded the file twice with the same outcome, pops up an error that just says install error?? Any of the updates before that installed fine..
blake .l said:
Anyone on the above rom having trouble with update?? I use the rom updater on the phone and it showed a new update for 8-12-18 I've downloaded the file twice with the same outcome, pops up an error that just says install error?? Any of the updates before that installed fine..
Click to expand...
Click to collapse
Download and install with twrp. If that build has treble and the one you're using doesn't, you need to flash with twrp for it to change OEM to vendor which the installer cannot do in boot time. It can be dirty flashed if the keys are the same. (I.E. test key to test key. If its from the same source, it is the same)
Uzephi said:
Download and install with twrp. If that build has treble and the one you're using doesn't, you need to flash with twrp for it to change OEM to vendor which the installer cannot do in boot time. It can be dirty flashed if the keys are the same. (I.E. test key to test key. If its from the same source, it is the same)
Click to expand...
Click to collapse
I got the file downloaded but when I go into TWRP and try to install I get this error.
Error applying update: 7 (ErrorCode: :
kInstallDeviceOpenError)
Update process ended with ERROR: 1
blake .l said:
I got the file downloaded but when I go into TWRP and try to install I get this error.
Error applying update: 7 (ErrorCode: :
kInstallDeviceOpenError)
Update process ended with ERROR: 1
Click to expand...
Click to collapse
Try with https://androidfilehost.com/?fid=3700668719832238233
Uzephi said:
Try with https://androidfilehost.com/?fid=3700668719832238233
Click to expand...
Click to collapse
Worked like a charm, Thanks!!
crazy question, how do i install magisk now? I've tried it with the older twrp i was using and I've tried it with the newer version twrp you suggested and i get boot loop now. I tried with the lineage recovery and it fails?

Mix 3 - installed GLOBAL rom and error after run

Hi. I have installed this global rom from here:
https://www.xda-developers.com/xiaomi-mi-mix-3-miui-10-global-stable-android-pie-download/
flashed it with TWRP, wiped cache and after system boot i have:
select language
select region
and after that i got message: "function find device has been closed", and the settings menu just restart. I can't do nothing bcs of this loop error...
Any ideas how to fix this?
Also after entering recovery by vol+ & power it's running xiaomi recovery, not TWRP... why?
Ok please delete, already wiped once again cache and now is fine
haxigi said:
Ok please delete, already wiped once again cache and now is fine
Click to expand...
Click to collapse
I'm running into the same problem... I did the following steps:
Reboot into the bootloader
Flashed TWRP
Held Volume UP and Power Botton to boot into TWRP
Wiped Cache and Dalvik Cache
However, this does not fix the problem. Can you further explain what you did step by step?
haxigi said:
Hi. I have installed this global rom from here:
https://www.xda-developers.com/xiaomi-mi-mix-3-miui-10-global-stable-android-pie-download/
flashed it with TWRP, wiped cache and after system boot i have:
select language
select region
and after that i got message: "function find device has been closed", and the settings menu just restart. I can't do nothing bcs of this loop error...
Any ideas how to fix this?
Also after entering recovery by vol+ & power it's running xiaomi recovery, not TWRP... why?
Click to expand...
Click to collapse
Each time you flash an official ROM twrp gets over written on reboot
xreactx said:
I'm running into the same problem... I did the following steps:
Reboot into the bootloader
Flashed TWRP
Held Volume UP and Power Botton to boot into TWRP
Wiped Cache and Dalvik Cache
However, this does not fix the problem. Can you further explain what you did step by step?
Click to expand...
Click to collapse
Same problem, also I only have china as region.
giodani97 said:
Same problem, also I only have china as region.
Click to expand...
Click to collapse
Search for miui_region_fix.zip on en.miui.com and flash in TWRP after rom.
EDIT: link is https://drive.google.com/file/d/1-g2zeY_avSZ9qqvNbFb-zP3CNp6k9GZR/view
No way to install it without twrp ?
Thanks, fixed location and force close of find device :good:
I can't get it to install with this Chinese TWRP. It says zip compatibility err. Did you guys have to do something else to get it installed.
PWn3R said:
I can't get it to install with this Chinese TWRP. It says zip compatibility err. Did you guys have to do something else to get it installed.
Click to expand...
Click to collapse
Delete the compatibility zip from the main zip and flash it again
Mackay53 said:
Delete the compatibility zip from the main zip and flash it again
Click to expand...
Click to collapse
Thanks, done and live on the Global version without wiping data.
Nice but if Zip is available, the fastboot rom is coming very soon I think maybe it's better to wait no ?
whats differences between this global and xiaomi.eu ROM?
palexis06 said:
Nice but if Zip is available, the fastboot rom is coming very soon I think maybe it's better to wait no ?
Click to expand...
Click to collapse
Will flash the same rom so doesn't matter
orsoraro said:
whats differences between this global and xiaomi.eu ROM?
Click to expand...
Click to collapse
Stay where you are, they will build an EU ROM based on global.
james1089 said:
Stay where you are, they will build an EU ROM based on global.
Click to expand...
Click to collapse
Wouldn't be too confident about that, It's always been based on the Chinese version.
Mackay53 said:
Wouldn't be too confident about that, It's always been based on the Chinese version.
Click to expand...
Click to collapse
Ah, right, I don't use miui usually. When I do it seems EU ROM was better over the years.
installed the rom, everything working fine until i flashed magisk 17.1 and stuck on the bootloop now. Anyone has the solution for this?
haris.bajramovic. said:
installed the rom, everything working fine until i flashed magisk 17.1 and stuck on the bootloop now. Anyone has the solution for this?
Click to expand...
Click to collapse
Uninstall magisk in TWRP. Don't think any works at the moment
Did you by chance tried also 16.3?

10.2.1.0 Global Update Available

Just checked for updates and this popped up. Enjoy.
Link for the download is: http://bigota.d.miui.com/V10.2.1.0.PEEMIXM/miui_MIMIX3Global_V10.2.1.0.PEEMIXM_9dc43870b4_9.0.zip
I just got this too! Do you know how I can update having twrp installed?
I just tried to install the smaller update above, it failed and now I'm downloading a 1.8gb version. Of you have TWRP installed, I'd probably just download the older OTA and fastboot flash boot boot.img from that OTA.
faddys123 said:
I just got this too! Do you know how I can update having twrp installed?
Click to expand...
Click to collapse
You should be able to install it like normal but ensure when your device reboots you enter your password to enter twrp. If that doesn't work just reboot into twrp and install it by selecting it from the downloaded ROM directory (I forget what the folder is called but it's not the normal download folder). You will have to reflash twrp afterwards.
xreactx said:
You should be able to install it like normal but ensure when your device reboots you enter your password to enter twrp. If that doesn't work just reboot into twrp and install it by selecting it from the downloaded ROM directory (I forget what the folder is called but it's not the normal download folder). You will have to reflash twrp afterwards.
Click to expand...
Click to collapse
This *should* would too.
Filename for the big file is: miui_MIMIX3Global_V10.2.1.0.PEEMIXM_9dc43870b4_9.0.zip we should be able to assemble the whole bigota.somethingsomethingsomething.darkside.xiaomi.downloads url using that, but I'm not at a computer and going to be late for work as is.
Sent from my Mi MIX 3 using Tapatalk
Ok got it installed i downloaded the 1.8gb flashed it via twrp then flashed twrp again and installed magisk all it working now ?
Noticed a few new things battery percentage text is now inside the battery icon!
Also there's a new 'suggestions' in the recents view, it can be turned off in the settings
faddys123 said:
Ok got it installed i downloaded the 1.8gb flashed it via twrp then flashed twrp again and installed magisk all it working now
Noticed a few new things battery percentage text is now inside the battery icon!
Also there's a new 'suggestions' in the recents view, it can be turned off in the settings
Click to expand...
Click to collapse
What version of Magisk did you install? I tried 17.3 and have a bootlooping phone.
The URL for the big OTA (1.8gb) is: http://bigota.d.miui.com/V10.2.1.0.PEEMIXM/miui_MIMIX3Global_V10.2.1.0.PEEMIXM_9dc43870b4_9.0.zip
PWn3R said:
What version of Magisk did you install? I tried 17.3 and have a bootlooping phone.
Click to expand...
Click to collapse
Using 17.3 as well mate
faddys123 said:
Using 17.3 as well mate
Click to expand...
Click to collapse
I just tried downloading a fresh copy of the Magisk zip. Same result. The phone starts booting then reboots into recovery. I don't know why this doesn't work. Did you have a "global" version of the phone? If so, can you backup your boot image with TWRP (the Magisk rooted one) and post it so we can try downloading and installing to see if it works on a Chinese phone?
Is it normal for the update size to not be displayed? This is my first update using a Xiaomi device & found it odd to not know how large a update was.
eseanq said:
Is it normal for the update size to not be displayed? This is my first update using a Xiaomi device & found it odd to not know how large a update was.
Click to expand...
Click to collapse
Mine showed the size for the small incremental which failed and for the full OTA which installed sucessfully. I have not been able to root this with Magisk, no matter what I tried. Every attempt at rooting with SuperSU or Magisk caused the device to bootloop and go back to recovery.
PWn3R said:
Mine showed the size for the small incremental which failed and for the full OTA which installed sucessfully. I have not been able to root this with Magisk, no matter what I tried. Every attempt at rooting with SuperSU or Magisk caused the device to bootloop and go back to recovery.
Click to expand...
Click to collapse
Where does the file size show up?
eseanq said:
Where does the file size show up?
Click to expand...
Click to collapse
It showed it in the text right below the MIUI logo on the updates page. Check the screenshot in the OP
PWn3R said:
It showed it in the text right below the MIUI logo on the updates page. Check the screenshot in the OP
Click to expand...
Click to collapse
Oh ****.. I'm guessing its the 599M? For some reason I thought that was part of the build. :laugh: Lmao.
eseanq said:
Oh ****.. I'm guessing its the 599M? For some reason I thought that was part of the build. :laugh: Lmao.
Click to expand...
Click to collapse
Yeah, that's the update download size. Don't be surprised when the 599 one fails to install (if you have stock recovery). It will download a 1.8GB one (the one I linked to in the OP now) and that one will install as expected. I think you can install either with TWRP if you want. GLHF
anyone figured how to root this? I flashed twrp then flash magisk 17.3 but it kept bootlooping to twrp.
No, I've tried everything. I have a suspicion we can root this on the Chinese device after we have fastboot images.
Sent from my Mi MIX 3 using Tapatalk
Great Update! Many things changed that are not mentioned in the changelog! Finaly notifications in the AOD! ?*?*
PWn3R said:
No, I've tried everything. I have a suspicion we can root this on the Chinese device after we have fastboot images.
Sent from my Mi MIX 3 using Tapatalk
Click to expand...
Click to collapse
I think this too.

Categories

Resources