Better use this one port
Probably you all may try and find out how to get best shots
Remember to set HDR+ mote to enhanced
Where's the original thread this came from? I'd like to do some more reading up on it.
CHH2 said:
Where's the original thread this came from? I'd like to do some more reading up on it.
Click to expand...
Click to collapse
I installed this version as of yesterday. Not sure if the OP's post is newer but this is a good start on info.
https://www.xda-developers.com/google-camera-hdr-customization-raw-support/
qualitymove13 said:
I installed this version as of yesterday. Not sure if the OP's post is newer but this is a good start on info.
https://www.xda-developers.com/google-camera-hdr-customization-raw-support/
Click to expand...
Click to collapse
Ok, I've seen that stuff before. So this is still the same line of that port where we have to dig through menus in hopes of finding the magic combo to make HDR stuff work? I had zero luck with that in a previous version. And did you use the same download link?
CHH2 said:
Ok, I've seen that stuff before. So this is still the same line of that port where we have to dig through menus in hopes of finding the magic combo to make HDR stuff work? I had zero luck with that in a previous version. And did you use the same download link?
Click to expand...
Click to collapse
I used the download at the bottom of the link I sent you. Seems to be the same port you mention but to be honest, I havent even played with it yet.
Yeah, I'm definitely going to need to find the original link to this from a reputable source. Just tried clicking into the link in the OP from work and the safeguard software that usually comes up yellow/gold for sites that are not allowed came up red. That's a first for me and enough for me to not download from that site.
CHH2 said:
Yeah, I'm definitely going to need to find the original link to this from a reputable source. Just tried clicking into the link in the OP from work and the safeguard software that usually comes up yellow/gold for sites that are not allowed came up red. That's a first for me and enough for me to not download from that site.
Click to expand...
Click to collapse
You may fetch it there https://androidfilehost.com/?fid=962021903579488245 and then compare bit-by-bit with file uploaded my me, should be identical
Billy Madison said:
You may fetch it there https://androidfilehost.com/?fid=962021903579488245 and then compare bit-by-bit with file uploaded my me, should be identical
Click to expand...
Click to collapse
I can tell you a side by side won't happen. That's the first time I've ever seen that severe of a warning pop-up for a site before so I won't be going there. I did load from the this link though and it looks like this still requires some set-up to get HDR working on it. It's dark out now so I won't know until later.
I tried the google camera. However, I find GP camera app sometimes adds more noise but does not over expose as much as LG camera. However, in some cases the LG is better...Guess it just depends on the situation. Here are some sames I took in auto mode using the same focus point (touched area to make sure they both focused on same object). of course the ones with the post it GP on them is the Google Camera app. These are in low light to very low light.
https://photos.google.com/share/AF1...?key=SVQ0dTNfY2dfSDBObEJKRE9nMEJCc2RkMG9EY3Fn
ya....i have the same opinions. V30 camera app at times produces better photos, where others Pixel 2 Camera does.
Pixel 2 ZERO SHUTTER LAG is no joke though, and i'm not sure if HDR+ is occuring as since if so the HDR+ is done within a split second with no status.
Is this better or the same as Google camera NX 7.1?
I found this link on reddit and a user there has said to download the newest Arnova port. https://www.celsoazevedo.com/files/android/google-camera/
Japultra said:
I found this link on reddit and a user there has said to download the newest Arnova port. https://www.celsoazevedo.com/files/android/google-camera/
Click to expand...
Click to collapse
with this version i actually am seeing the HDR+ processing post image capture. There are a lot less options available in this version though.
hachiroku said:
with this version i actually am seeing the HDR+ processing post image capture. There are a lot less options available in this version though.
Click to expand...
Click to collapse
Me too. Have to play with it a bit more but it looks like the main banner features are working using the suggested settings.
Japultra said:
I found this link on reddit and a user there has said to download the newest Arnova port. https://www.celsoazevedo.com/files/android/google-camera/
Click to expand...
Click to collapse
I'd been looking for a working recent version for awhile. The other ones I could find were either an older version, or the updated version with all the options, but didn't work. Thank you for this! Going to test in a bit. I know it won't be Pixel 2 quality, but if I could match S8/N8 quality, I'd be super happy.
ok...so last night i was doing a bit of testing with Arnova's 5.1.014_v8.1 (Android 7+): same as BSG's v.4.0, but based on the new GCamera 5.1.x, with settings set as listed below. I do have to say...image quality as well as color reproduction is better than with the V30's camera. the difference is slight, but noticeable when you zoom into hard to focus lock area's. color reproduction is also a touch better. one thing to note though was I did run into a few freeze or hick ups with GCMod 5.1. When I'd press the shutter button, it would grey the screen, or do nothing. Would have to press the shutter button 2-5 times sometimes but it eventually would take the photo. Not always but sometimes this would occur.
https://forum.xda-developers.com/showpost.php?p=74290748&postcount=1016
Settings:
Model: Pixel 2XL (or Nexus 6P if you want more detailed images)
Config camera HDR+: Nexus6 HDR+ Auto Zsl (or Nexus6 HDR+ Auto)
HDR+ parameters: Medium (or higher)
To enable the HDR+ UI button: Settings > Advanced > HDR+ control (img)
The rest (video resolution, camera sounds, etc) is up to you.
Warning: You need to restart the app so the new settings are applied.
Click to expand...
Click to collapse
I've tested the front cam with the port at the above settings but LG's own camera comes out better every time. Does anyone have a different experience?
hachiroku said:
.
Click to expand...
Click to collapse
These settings are for 1+3 which is on 820 snap
The proper for V30 is Settings:
Model: Pixel 2XL
Config camera HDR+: Pixel + Smartburst
HDR+ parameters: Very High
To enable the HDR+ UI button: Settings > Advanced > HDR+ control (img)
And use that port https://forum.xda-developers.com/showpost.php?p=74356238&postcount=7
Droid Life today says the V30 Oreo beta is available to a select group of users in Korea. Naturally they cite "speed improvements" and I'm sure the camera software is lumped into that.
http://social.lge.co.kr/newsroom/lg_v30_os_1102/
I'd have to guess that at some point "too soon" in the V30's Nougat development, the team was forced to say "that's good enough -- ship it" and move on to 8.0 (or 8.1 -- fingers crossed) development. No sense in wasting resources perfecting an already out-of-date OS..
It's unfortunate the timing works out the way it does -- surely this results in some of the critiques the phone has received, and those blemishes can't be easily undone, even if they release a *flawless* Oreo in the next couple of months with a fully optimized camera experience.
As usual, simply having this app installed on my device causes a battery drain. Oh well. It works rather well though.
Sent from my LG-H872 using XDA Labs
Related
Camera KK this looks like it was built with CameraNext and has had the best results from any camera app on Fire Phone I have used. Even with flash!
I attached some unaltered shots outdoors and indoors with lights on and off in my server room.
Free has ads and $1.99 to remove them. So try it and let me know any tips you might find.
Still has flash issue in low light. It's going to take more than an app in the store to resolve the issue.
Nice, good find, flash pic quality looks similar to the ones from Snap Camera... I found the post I was thinking about:
mhill1986 said:
Snap Camera:
• Exposure compensation to -2 ev
• ISO manually set to 1600
Click to expand...
Click to collapse
And now get that cable management in order! *shudders*
Just kidding... this should be posted in "General", since it's useful information about one of the biggest issues, Magnum_Enforcer to the rescue!
Do I have the power to move it?
distearth said:
Do I have the power to move it?
Click to expand...
Click to collapse
No, but I do.
I tried reducing exposure -1 and that did a little but the flash normal was also pretty good. The pic from the op was in a completely dark room so have to see what low light looks like.
distearth said:
I tried reducing exposure -1 and that did a little but the flash normal was also pretty good. The pic from the op was in a completely dark room so have to see what low light looks like.
Click to expand...
Click to collapse
Oohhh very nice, that's a very solid result for basically "default settings"! Will download it and take on a "test drive" tomorrow.
Compared to the pics taken with the new Huawei Mate S, why are we even complaining... :laugh:
(...added the quote about the Snap Camera settings in my previous post, SC requires a little more work to yield good results...)
HDR freezes the app... sigh...
... and so will * every other app when using HDR. I don't need it, some people can't live without it (looking at you, russy23 ^^).
Camera KK is a solid alternative to Snap Camera or Camera MX, and easy to use because of the stock Android look & feel.
*almost
Camera Zoom FX
I tried taking HDR pics using Camera Zoom FX and it didn't crash.
I also found a good camera app that works great on the slimcat rom: cymera. Flash works and great filters are integrated. Couldnt find an option for HDR though...
Could someone try Simple Camera, it went free in the amazon app store today. Didn't know if maybe being from the Amz App Store might make a difference in getting a good flash... I'm back on Stock Fire OS right now so I can't try myself...
Thanks,
distearth said:
Could someone try Simple Camera [...] Didn't know if maybe being from the Amz App Store might make a difference in getting a good flash
Click to expand...
Click to collapse
Thanks for mentioning (It's free in the US store, in Germany for example, they want 74 cents, hehe)
But sadly, being from the Amzn Store means nothing. A lot of "Devs" (more like "copy paste coder" ^^) publish their apps on multiple portals to make a little more $$$. This app is the exact same version as on Google Play Store.
It's based on OpenCamera, it even creates the "OpenCamera" subfolder in the "DCIM" folder. ^^ Default settings: flash pics are overexposed...
edit: Also tried "Cymera" on the weekend. It's, uhh, very "girly". For people who love filters & gramin' it's a feasible alternative, I'll stick with the "functional" ones, like Camera KK.
Can't you use the camera apk from Fire OS? Or does that require all the Amazon framework, kernel, our HAL stuff?
DePingus said:
Can't you use the camera apk from Fire OS? Or does that require all the Amazon framework, kernel, our HAL stuff?
Click to expand...
Click to collapse
Correct, source code for the camera HAL is needed. Highly unlikely that it will be released by Amazon.
Oh wait, we're all getting bootloader unlock codes for Christmas when they put the developer version under our trees.
LOL Camera KK force closes on me. Cymera works though.
Bingo Bronson said:
Thanks for mentioning (It's free in the US store, in Germany for example, they want 74 cents, hehe)
But sadly, being from the Amzn Store means nothing. A lot of "Devs" (more like "copy paste coder" ^^) publish their apps on multiple portals to make a little more $$$. This app is the exact same version as on Google Play Store.
It's based on OpenCamera, it even creates the "OpenCamera" subfolder in the "DCIM" folder. ^^ Default settings: flash pics are overexposed...
edit: Also tried "Cymera" on the weekend. It's, uhh, very "girly". For people who love filters & gramin' it's a feasible alternative, I'll stick with the "functional" ones, like Camera KK.
Click to expand...
Click to collapse
How is this compared to snap camera? Anyone tried both?
krackers said:
How is this compared to snap camera? Anyone tried both?
Click to expand...
Click to collapse
I bought Snap Camera, it has a good amount of options for people who want to customize their photo settings.
Quality is good, flash pics work too, you can correct the exposure if needed (other apps have this as well, ofc.)
Right now, I'm still using Camera KK (free version), because I just need a simple "shooter", just like the stock android app.
Anyone found a decent camera to take pictures when light is low without using flash? My pictures are always too dark even if I try to change light exposure...
goosele said:
Anyone found a decent camera to take pictures when light is low without using flash? My pictures are always too dark even if I try to change light exposure...
Click to expand...
Click to collapse
Camera KK, exposure -1, is the best I got. Tried a bunch.
After trying many versions from the main thread in op3 forum, I found a version that works best for the nextbit robin. Considering it's running on an 808, decent performance with HDR+ even in low light.
Credits to B-S-G at 4PDA for the mod.
Settings: screenshot
APK: mirror
can't seem to get the decryption key to work.
mlboss said:
can't seem to get the decryption key to work.
Click to expand...
Click to collapse
You probably copied it wrong. Blame xda for not allowing links to be posted. Excluding http prefix seems to work around it.
The version from this post seems to work as well on the latest LineageOS. The "Config camera HDR+" setting should be "Nexus6 (Max = High)".
Arktronic said:
The version from this post seems to work as well on the latest LineageOS. The "Config camera HDR+" setting should be "Nexus6 (Max = High)".
Click to expand...
Click to collapse
Can the HDR+ parameter actually be set to High though? Several versions I tried could only do Medium. The version I posted came directly from the thread on 4PDA.
Yes, the "High" setting works in that build.
Works great so far on AOSPA. Thanks for sharing.
Does this camera have slow motion? I have been trying to find a camera that offers slow motion for the Nextbit Robin. So far I've been unsuccessful. Currently I am stock, but would be open to flashing something like RR or Lineage if its stable and I dont lose any functionality...i.e.. fingerprint reader and everything else works.
I haven't yet seen a version with working slow motion on the Robin. 60fps works, though.
The latest 5.1.016-based mod from B-S-G seems to work as well, using the "Nexus 6 Hdr+ Auto" setting. Unfortunately, I've had no luck getting any of the 5.1.018 versions working.
Arktronic said:
The latest 5.1.016-based mod from B-S-G seems to work as well, using the "Nexus 6 Hdr+ Auto" setting. Unfortunately, I've had no luck getting any of the 5.1.018 versions working.
Click to expand...
Click to collapse
Can you please post a screenshot of your settings page? Thank you.
Any other setting you changed/tried that work well?
The settings I'm currently using are:
Code:
Model: Nexus 6P
Config camera HDR+: Nexus 6 Hdr+ Auto
HDR+ parameters: High
As I understand it, the "Model" selection tweaks certain algorithms that affect the final image, though I haven't seen any definitive explanation for that.
When installing updates to this app, it's often necessary to clear all data for it, or else it may crash.
EDIT: Oh yeah, running latest LOS.
Arktronic said:
The latest 5.1.016-based mod from B-S-G seems to work as well, using the "Nexus 6 Hdr+ Auto" setting. Unfortunately, I've had no luck getting any of the 5.1.018 versions working.
Click to expand...
Click to collapse
Settings I was using
Mode : Pixel XL(corr)
HDR+ : Nexus 6 Hdr+ Auto
ROM : OmniROM
This was working fine for about 10-20 photos in 2-3 days. Until one day(yesterday) suddenly while taking a photo it crashed the app after clicking the image (image wasn't saved). And it kept doing it even after relaunching the app. Odd thing was the same thing kept happening on all camera apps. A reboot fixed it for other camera apps but didn't fix it for this app.
Arktronic said:
The settings I'm currently using are:
Code:
Model: Nexus 6P
Config camera HDR+: Nexus 6 Hdr+ Auto
HDR+ parameters: High
As I understand it, the "Model" selection tweaks certain algorithms that affect the final image, though I haven't seen any definitive explanation for that.
When installing updates to this app, it's often necessary to clear all data for it, or else it may crash.
EDIT: Oh yeah, running latest LOS.
Click to expand...
Click to collapse
After the above happened I cleared the settings before uninstalling and reinstalled this app and used the settings you suggested. Now it doesn't crash but it won't finish the Processing HDR+ thing and never save the image
I have tried changing to various models. I guess I will have to try a few different versions with different settings.
Any suggestion as to how to make the process of finding the right setting & version by trying various versions quick and less time consuming?
Interesting. The crash you described sounds like a hardware or firmware issue. I've not used OmniROM, so I'm not sure what camera APIs they've implemented. I know that there was a period of time when LineageOS had a lot of camera API work done, so that may have affected overall app compatibility. Also, while I hate to suggest this, you might consider doing a factory reset via TWRP, because it sounds like something might have gotten into a bad state since reboots aren't helping.
The best way I've found to play around with the settings isn't particularly great. I pin the app to my home screen for easy access, and do the following:
Launch the Camera app, test it out
Make settings changes
Go back to the main camera screen
Kill the app by hitting the Overview (square) button and swiping it away
Go to step 1
Hope this helps!
I am not sure if its a firmware issue or not because after the reboot other camera apps work properly.
Ha! I guess there is no other good way to test it out.
btw were you able to get burst mode working? I never was able to get it working even when it was working.
I've never seen Burst mode work on the Robin.
I guess for burst mode I will have to go back to my usual camera app.
Anyone got this working on stock?
Nexus 6p would probably be a better choice for the config, it has a 64 bit snapdragon 810. Seems to capture faster than selecting the pixel 2 or nexus 6.
Although I took a comparison HDR shot between open camera (on camera2 API) and this modded camera, open camera had better HDR post processing and didnt take as long to apply the changes. Ill probably keep this modded camera for the panorama though.
Reiyer said:
Anyone got this working on stock?
Click to expand...
Click to collapse
The version that Arktronic posted (latest 5.1.016-based mod from B-S-G) works fine for me in stock 7.0 with the settings:
Code:
Model: Nexus 6P
Config camera HDR+: Nexus 6 Hdr+ Auto
HDR+ parameters: High
I have not tried to play with any other settings, nor tried it in stock 7.1.1.
Hey all, anybody know the latest link(s) to a copy of google camera working on the note10 snapdragon with both normal and wide angle cameras? I assume there are working 7.3 ports now, but having a difficult time finding anything.
gambit07 said:
Hey all, anybody know the latest link(s) to a copy of google camera working on the note10 snapdragon with both normal and wide angle cameras? I assume there are working 7.3 ports now, but having a difficult time finding anything.
Click to expand...
Click to collapse
I found this one, it's supposed to be the latest stable/fully functional version to date, but, feel free to look around:
https://www.xda-developers.com/google-camera-port-hub
https://forum.xda-developers.com/showpost.php?p=80610241&postcount=7
KOLIOSIS said:
I found this one, it's supposed to be the latest stable/fully functional version to date, but, feel free to look around:
https://www.xda-developers.com/google-camera-port-hub
https://forum.xda-developers.com/showpost.php?p=80610241&postcount=7
Click to expand...
Click to collapse
Thanks, that's an older version that's been around for a while. I did find an updated 7.3 version that I tested and seems to be working really well. Including the link here in case anyone else comes across this thread:
https://forum.xda-developers.com/apps/google-camera-mods/google-camera-urnyx05-t3937515
Edit: Only change needed is to go into camera settings -> Advanced -> Auxiliary camera and enable the wide angle
gambit07 said:
Thanks, that's an older version that's been around for a while. I did find an updated 7.3 version that I tested and seems to be working really well. Including the link here in case anyone else comes across this thread:
https://forum.xda-developers.com/apps/google-camera-mods/google-camera-urnyx05-t3937515
Edit: Only change needed is to go into camera settings -> Advanced -> Auxiliary camera and enable the wide angle
Click to expand...
Click to collapse
The focus is definitely much faster on point & shoot than the one I linked (total amateur here,my photo needs are rudimentary at the most, LOL)
Unless I'm missing something, seems you have to exit the camera & go to your file app of choice to view the most recent pic. Not sure if this is a known issue, or, user error on my part......
KOLIOSIS said:
The focus is definitely much faster on point & shoot than the one I linked (total amateur here,my photo needs are rudimentary at the most, LOL)
Unless I'm missing something, seems you have to exit the camera & go to your file app of choice to view the most recent pic. Not sure if this is a known issue, or, user error on my part......
Click to expand...
Click to collapse
Ah, I believe you can fix that by installing Google Photos or by going into settings and select to use a third-party gallery
A working Gcam for our phone, because we deserve it:
BSG GCam APKs - Google Camera Port
Modified Google Camera app by BSG.
www.celsoazevedo.com
(always use this version: org.codeaurora.snapcam)
Compared to the stock camera, the shutter is faster and the colours are somewhat more vibrant. Haven't had a chance to compare night modes yet.
If you have an XML setup to recommend, please do share.
stazz83 said:
A working Gcam for our phone, because we deserve it:
BSG: MGC_8.1.101_A9_PV0h
Download MGC_8.1.101_A9_PV0h by BSG.
www.celsoazevedo.com
(always use this version: org.codeaurora.snapcam)
Compared to the stock camera, the shutter is faster and the colours are somewhat more vibrant. Haven't had a chance to compare night modes yet.
If you have an XML setup to recommend, please do share.
Click to expand...
Click to collapse
Nice thanks! Do you know how to set it as the default camera app? I tried disabling the op camera app, but now I cannot open my camera from my lock screen.
jprattnu said:
Nice thanks! Do you know how to set it as the default camera app? I tried disabling the op camera app, but now I cannot open my camera from my lock screen.
Click to expand...
Click to collapse
The option should be under app info > advanced settings.
Update: I have tested the latest BSG's version of 8 April and it works as well.
Just make sure you download the org.codeaurora.snapcam version from this page:
BSG: MGC_8.1.101_A9_GV1zfix
Download MGC_8.1.101_A9_GV1zfix by BSG.
www.celsoazevedo.com
Weird how 4K 60fps only works on the ultrawide camera and not the main camera.
Is there any gcam mod that allows to record 8k and 4k/120fps? BTW I tried many mods and I did not find any with all functionalities available: all cameras, motion photos, night sight etc. If motion photos available, only single camera can be used, etc.
I also don't understand why they decided to remove all languages other than English from all mods. Original Gcam supports many languages.
giaur said:
Is there any gcam mod that allows to record 8k and 4k/120fps? BTW I tried many mods and I did not find any with all functionalities available: all cameras, motion photos, night sight etc. If motion photos available, only single camera can be used, etc.
Click to expand...
Click to collapse
Not at the moment, as far as I know but our device's release happend less than a month ago so the development is still in early stages. BSG is quite fast at updates so hopefully it'll eventually happen.
giaur said:
I also don't understand why they decided to remove all languages other than English from all mods. Original Gcam supports many languages.
Click to expand...
Click to collapse
I guess that way is much more simple and if that's the trade-off for faster updates than I'm very happy with it.
stazz83 said:
I guess that way is much more simple
Click to expand...
Click to collapse
What is much more simple? Additional languages strings are original from Google, no need to touch them. Of course, additional custom settings will appear in English only, because they won't be translated.
Additional effort required to remove all translations. So it's opposite to what you are saying
What's the difference between the org.codeaurora.snapcam and the com.google.android.GoogleCameraEng apks?
Was wondering the same... Thank you.
JCDentonMale said:
What's the difference between the org.codeaurora.snapcam and the com.google.android.GoogleCameraEng apks?
Click to expand...
Click to collapse
JCDentonMale said:
What's the difference between the org.codeaurora.snapcam and the com.google.android.GoogleCameraEng apks?
Click to expand...
Click to collapse
That's the package signature. On some phones, using the Snapcam one allows access to the auxiliary cameras (ultrawide, telephoto).
jericho246 said:
That's the package signature. On some phones, using the Snapcam one allows access to the auxiliary cameras (ultrawide, telephoto).
Click to expand...
Click to collapse
So IOTW, the snapcam is preferred for the 9 Pro then? Also, can anybody find a way to track that specific release somehow incase it updates? Thank you!
Edit - what is an XML setup btw?
jprattnu said:
So IOTW, the snapcam is preferred for the 9 Pro then?
Click to expand...
Click to collapse
I think so, yes. I read Snapcam is recommended for phones from BBK-owned smartphone brands. However keep in mind a brand could "block" the access to auxiliary cameras at any moment. For example Samsung blocked access to the selfie camera, so in GCam ports, the selfie camera just does not work on Samsungs... Not sure if they have fixed it, but I know it's been a problem for Samsung users.
jprattnu said:
Also, can anybody find a way to track that specific release somehow incase it updates? Thank you!
Click to expand...
Click to collapse
I don't think there's a way to track it, just gotta visit the celsoazevedo page from time to time. Although most updates are minor, so don't worry about that.
jprattnu said:
Edit - what is an XML setup btw?
Click to expand...
Click to collapse
You can download a XML file, and import it to the GCam app. It will import settings from the file, so if you find a XML file for the 9 Pro BSG Gcam port, just download it and import it via the app. Also you can create XML files yourself, and share them if you want as well.
jericho246 said:
I think so, yes. I read Snapcam is recommended for phones from BBK-owned smartphone brands. However keep in mind a brand could "block" the access to auxiliary cameras at any moment. For example Samsung blocked access to the selfie camera, so in GCam ports, the selfie camera just does not work on Samsungs... Not sure if they have fixed it, but I know it's been a problem for Samsung users.
Click to expand...
Click to collapse
Some manufacturers have even coded things to prevent third-party cameras from using the phone's full camera resolution capabilities. On OnePlus devices they could be locked to 12 MP, even the main camera.
jprattnu said:
So IOTW, the snapcam is preferred for the 9 Pro then? Also, can anybody find a way to track that specific release somehow incase it updates? Thank you!
Edit - what is an XML setup btw?
Click to expand...
Click to collapse
Here is the updated files from the site that does all the gcam mods https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/
There is no configs anyone has done yet here is my saved one with my settings if you wish to try it, only changed lens device settings and interface settings, nothing modified for actual photo adjustments.
To apply go into setting and look for load xml then pick it from the file picker
JCDentonMale said:
What's the difference between the org.codeaurora.snapcam and the com.google.android.GoogleCameraEng apks?
Click to expand...
Click to collapse
me too ...
jeudecon said:
me too ...
Click to expand...
Click to collapse
JCDentonMale said:
What's the difference between the org.codeaurora.snapcam and the com.google.android.GoogleCameraEng apks?
Click to expand...
Click to collapse
jprattnu said:
Was wondering the same... Thank you.
Click to expand...
Click to collapse
Nothing, really. They just have different signatures. If you find that certain additional modules (Magisk flashables that add or enhance a device's camera functions) don't work, try the other. Some devices have a camera version signed specifically for them (ie, Samsung phones) because of this. It just happens that the snapcam signature seems to work best on our device.
I'm having some nasty issues with a strong lilac purple pink RAW files from Gcam recently. It makes it unusable. It worked fine before but suddenly this problem started happening, perhaps it came after a system update. :/
/ Magnus
stazz83 said:
A working Gcam for our phone, because we deserve it:
BSG: MGC_8.1.101_A9_PV0h
Download MGC_8.1.101_A9_PV0h by BSG.
www.celsoazevedo.com
(always use this version: org.codeaurora.snapcam)
Compared to the stock camera, the shutter is faster and the colours are somewhat more vibrant. Haven't had a chance to compare night modes yet.
If you have an XML setup to recommend, please do share.
Click to expand...
Click to collapse
I tried this and the colors were way to bright and inaccurate
Rebelwolf4622 said:
I tried this and the colors were way to bright and inaccurate
Click to expand...
Click to collapse
We'll, it's not a secret that Google's image processing slightly saturates the colours and beautifies photos. Not a bad thing imho.
Anyhow, BSG keeps releasing new builds, the latest one dated today:
BSG: MGC_8.1.101_A9_GV1zfix
Download MGC_8.1.101_A9_GV1zfix by BSG.
www.celsoazevedo.com
Is there a recommended source for gcam 8.4 that is stable and safe to use? We have both A52 5g and a52s 5g-s.
Hi,
on my A52s 5G (SM-A528B) most recent version of gcam that works is 8.1, anything higher force closes immediately.
I got the best results with this mod: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/
LNQ said:
Hi,
on my A52s 5G (SM-A528B) most recent version of gcam that works is 8.1, anything higher force closes immediately.
I got the best results with this mod: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/
Click to expand...
Click to collapse
Thank you! Can you do raw/dng bracketing with this version? (-3, -2, -1, 0, +1, +2, +3 EV series)
tamas970 said:
Thank you! Can you do raw/dng bracketing with this version? (-3, -2, -1, 0, +1, +2, +3 EV series)
Click to expand...
Click to collapse
Yeah you can configure really a lot of stuff, though I didn't test the raw mode.
But I created a config with some moderate changes to image quality and general configuration for the different lenses of the device since the provided ones didn't work properly for me.
Could share, if you like.
LNQ said:
Yeah you can configure really a lot of stuff, though I didn't test the raw mode.
But I created a config with some moderate changes to image quality and general configuration for the different lenses of the device since the provided ones didn't work properly for me.
Could share, if you like.
Click to expand...
Click to collapse
Sure, many thx! I'll try to dig in the raw story, because this sensor definitely has more potential then the 8bit jpegs.
Here it is!
A few notes: The most relevant options I changed are in Settings -> Modules.
For the lenses to properly work I had to set the option "Session of photo modes" for each lens to 61448 OR 61444 (both work).
You can tune every lens individually there, which is a pretty nice option to have. Most changes are really subtle. I spent a lot of time with the night mode and the HDR/Image Processing settings. Its really just a base config on which you can build up.
Easiest way imho is to only change one option at a time and take test photos. You really can get lost in there but I rather enjoyed it!
Enjoy!
LNQ said:
Here it is!
A few notes: The most relevant options I changed are in Settings -> Modules.
For the lenses to properly work I had to set the option "Session of photo modes" for each lens to 61448 OR 61444 (both work).
You can tune every lens individually there, which is a pretty nice option to have. Most changes are really subtle. I spent a lot of time with the night mode and the HDR/Image Processing settings. Its really just a base config on which you can build up.
Easiest way imho is to only change one option at a time and take test photos. You really can get lost in there but I rather enjoyed it!
Enjoy!
Click to expand...
Click to collapse
Thank you!
You're very welcome, I'm happy to be useful.
I have a problem with the latest version (now) the viewfinder just freezes after few seconds of opening the camera.
Tried MGC_8.4.500_A10_V6 and MGC_8.1.101_A9_GV1zfix
And I'm on the latest one ui 4.1
Lil Geeky said:
I have a problem with the latest version (now) the viewfinder just freezes after few seconds of opening the camera.
Tried MGC_8.4.500_A10_V6 and MGC_8.1.101_A9_GV1zfix
And I'm on the latest one ui 4.1
Click to expand...
Click to collapse
You're footer mentions Xiaomi Mi 9, but since you are asking here I am assuming you are using an A52s?
MGC 8.4 is not so interesting because it lacks many image quality features that the 8.1 series has. So MGC_8.1.101_A9_GV1zfix is the way to go with MGC.
For the A52s viewfinder freezing is a known issue that you have to work around. And in later 8.1 series they slightly changed the way it is fixed, which means older config files don't apply the fix correctly.
I think the config file shared in this thread earlier was very similar to the common luke config file, so I attached a version of the luke config file that also fixed the freeze on the GV1zfix version. You can load it by double tapping next to the shutterbutton (or from Settings|Configs|Load in the app).
(and there is endlessly more discussion about gcam on A52s in this thread).
Thread closed. Please continue your discussion here.
-Regards: Badger50