My nexus 5x is stuck in the boot animation (spinning circles) after erase/format of userdata (for at least 30 minutes, and tried holding power to reboot several times with the same result).
I recently updated to the latest Oreo build in the same way that I always have in the past. This time the only thing different was that I wiped userdata. I had already updated from 7.1.2 to the 8.0.0 August build, and then to the September build without any problems.
I got tired of lagging and other issues so I did a factory reset and wipe data using settings. After that the steps I used to flash the October update:
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot erase userdata
fastboot format userdata
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
This is the first time that I've formatted and erased userdata so I think that's what caused the problem. I've never had a problem until now and the only reason I tried those two commands is because none of the recent nexus images come with a userdata.img file. What can I do to get back up and running with a successful boot?
Thanks much!
Update:
I flashed the userdata.img file from the stock 7.1.1 build (the last build that included a userdata.img file that I was able to find). After reboot it continued to hang on the spinning circles. Then I went ahead and flashed the full 7.1.1 build and it booted to the initial setup screen like normal.
Since that worked, I flashed the October 8.0 update and it's now stuck at the Google logo (plain white google text on black background) while overheating. Any advice at this point would be appreciated. I don't really want to go back to 7.1.2 and be stuck there.
Flash the complete Oreo-firmware. If you cleaned everything, why to trust in functionality of a big update?
rp158 said:
Flash the complete Oreo-firmware. If you cleaned everything, why to trust in functionality of a big update?
Click to expand...
Click to collapse
I did flash the complete Oreo (October update). I resolved the issue by flashing 7.1.2 with the vendor and cache img from 7.1.1 and letting the OTA updates happen. Now I'm on the October 8.0 update.
I'm not sure what the problem was, maybe a corrupted download of the OPR4.170623.009, Oct 2017. I resolved the issue before I did an SHA-256 Checksum.
Related
Every time I try to flash boot.img for a custom ROM using fastboot the bootloader on the device crashes (gets stuck until manual reboot).
It seems to flash fine according to terminal.
To test, I just flashed the newest CWM recovery using fastboot and that worked fine. Bootloader didn't get stuck.
The device is crashing a lot since installing 1.29 ROMs so I think boot.img isn't flashing.
any ideas?
is that after changing roms?
You need to have correct boot.img for the ROM you are using.
Also, between changing ROMs, you should delete at least(!) the cache partition (fastboot erase cache), preferably whole /data (will reset to factory!).
Simply put - I think erasing cache will solve your problem: fastboot erase cache
Did you manage to resolve this in the end? I'm getting exactly the same issues.
Naturally, after posting, I realised that I was typing fastboot boot boot.img, forgetting to add the "flash"
Actual syntax: fastboot flash boot boot.img
Hi, I recently installed official android 5.1 from factory source but now I have issues "missing" storage.
32GB Nexus 7 2013 (Wifi)
TOTAL: 26,9 GB
Used: 17,3GB
Free: 9,6GB
Theese numbers are not supposed to be what they are right out of the box with barely no apps installed and nothing else stored. I am supposed to have much more free space.
I followed this guide to install every .img file manually that was included in the official factory images.
Install instructions followed:
Flash bootloader and radio (radio does not appear on all devices, if it's not in your tgz, you don't need it)
fastboot flash bootloader <bootloader file name here>.img
fastboot flash radio <radio file name here>.img
After flashing the bootloader/radio, you need to reboot the bootloader as shown below, don't skip this step!
fastboot reboot-bootloader
Now you can move on to the rest of the files
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
NEXUS 9 ONLY - flash this as well
fastboot flash vendor vendor.img
If you want to wipe cache and user data (full wipe), flash these
fastboot flash cache cache.img
fastboot flash userdata userdata.img
Finally, just reboot your device, and Android should start up.
fastboot reboot
The reason that I "manually" flashed every .img file is because I got errors when using the flash-all.bat file
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
failed to allocate 842365088 bytes
error: update package missing system.img
Thanks in advance for help!
EDIT:
Confirmed: factory reset/data wipe in stock recovery solved the storage problem
Try formatting data with twrp. That fixed the no storage problem I had a while ago.
yosmokinman said:
Try formatting data with twrp. That fixed the no storage problem I had a while ago.
Click to expand...
Click to collapse
I haven't installed TWRP yet, do you know if it supports 5.1? Any chance that the stock recovery can do the same?
You could try a factory reset/data wipe in stock recovery. Latest twrp works fine.
yosmokinman said:
You could try a factory reset/data wipe in stock recovery. Latest twrp works fine.
Click to expand...
Click to collapse
Confirmed: factory reset/data wipe in stock recovery solved the storage problem
Thank you very much
my nexus 32gb is showing like 26.5gb after the update for 5.1 this is normal value? 6gb is consumed by the OS or something?
my device is fullwiped
All,
I am not a noob by any means, but when I attempted to manually flash the img files via fastboot for the latest N build from the factory images coming from the last 6.0.1 build I get stuck on the Google logo. I checked the commands and re-flashed again and the same result happened ( i did flash radios and BL ) .
I even tried to format data ( i had backed everything up ) , still no go and stuck at google logo still. I could access BL and able to access TWRP.
I got frustrated and flashed the 6.0.1 images including BL and radio via fastboot and booted up just fine. I then rooted, installed flashfire and used the OTA and Android N installed just fine.
Does anyone have any idea what could be causing this. I am currently on N, but wanted to do a clean install .
Thanks in Advance
Did you flash vendor.img?
Why don't you list the exact commands you used to flash, then people can comment.
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot flash recovery twrp-3.0.2-2-bullhead.img
fastboot reboot-bootloader
fastboot flash recovery twrp-3.0.2-2-bullhead.img
Flashing mtc20k works successfully
Using the same commands to flashing npf10c results in stuck the google logo
In order for me to even get on N I have to me on 6.0.1 then either use the bullhead-ota-npf10c-d1785fea.zip on the root of the SD card and use flashfire OR use the following command from stock recovery
adb sideload bullhead-ota-npf10c-d1785fea.zip
The later is what I did recently, but both will work to get to N.
So why can I not simply flash the factory images like for 6.0.1?
carm01 said:
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot flash recovery twrp-3.0.2-2-bullhead.img
fastboot reboot-bootloader
fastboot flash recovery twrp-3.0.2-2-bullhead.img
Flashing mtc20k works successfully
Using the same commands to flashing npf10c results in stuck the google logo
In order for me to even get on N I have to me on 6.0.1 then either use the bullhead-ota-npf10c-d1785fea.zip on the root of the SD card and use flashfire OR use the following command from stock recovery
adb sideload bullhead-ota-npf10c-d1785fea.zip
The later is what I did recently, but both will work to get to N.
So why can I not simply flash the factory images like for 6.0.1?
Click to expand...
Click to collapse
What happens when you flash a Nougat factory image that is NOT a developer preview? Try flashing NRD91N from here:
https://developers.google.com/android/images?hl=en
Sent from my Nexus 5X using Tapatalk
carm01 said:
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot flash recovery twrp-3.0.2-2-bullhead.img
fastboot reboot-bootloader
fastboot flash recovery twrp-3.0.2-2-bullhead.img
Flashing mtc20k works successfully
Using the same commands to flashing npf10c results in stuck the google logo
In order for me to even get on N I have to me on 6.0.1 then either use the bullhead-ota-npf10c-d1785fea.zip on the root of the SD card and use flashfire OR use the following command from stock recovery
adb sideload bullhead-ota-npf10c-d1785fea.zip
The later is what I did recently, but both will work to get to N.
So why can I not simply flash the factory images like for 6.0.1?
Click to expand...
Click to collapse
I don't usually flash cache or user.
Try this instead and see if it works.
Instead of flashing cache.img
fastboot erase cache
fastboot format cache
(if you want to reset user)
fastboot erase userdata
fastboot format userdata
sfhub said:
I don't usually flash cache or user.
Try this instead and see if it works.
Instead of flashing cache.img
fastboot erase cache
fastboot format cache
(if you want to reset user)
fastboot erase userdata
fastboot format userdata
Click to expand...
Click to collapse
SlimSnoopOS said:
What happens when you flash a Nougat factory image that is NOT a developer preview? Try flashing NRD91N from here:
https://developers.google.com/android/images?hl=en
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I have tried fastboot erase userdata and fastboot format userdata and fastboot erase cache
fastboot format cache and that never worked.
I tried that factory image before and resulted in the same, however, I will at sometime attempt to do the final of 7.1.1 once it is available sometime in December 2016 and hopefully will resolve the issue.
I will stay on DP1 right now as i find the battery extremely excellent, the Visual VM is back now, and i notice some notifications are coming through better than in 7.0. (I read an article earlier today about notifications and the pixel not coming through)
Thanks in Advance for the people that did come through so far and wanted to thank you for your input on the matter and if i don't have a pixel by December I will try this out.
How to go from Lineage OS 14.1 to stock? (Updated with the process & latest links)
I am currently on lineage OS 14.1 (7.1.2) dated 18.09.2017.
I want to go back to stock firmware as I am facing some issues with lineage.
How to find the latest firmware. Found this website which has all the images https://firmware.center/firmware/Motorola/Moto Z Play/Stock/XT1635-02/
But I am unable to select the correct one for my device. (do not want to brick it). Also found another thread stating latest firmware
https://forum.xda-developers.com/moto-z-play/help/addisonnpns26-118-22-1cid50subsidy-t3675521
I am an Indian MOTO Z Play
Is there a way to go full stock and also start to receive OTA updates. Can someone provide me with full guide with links?
First you need exactly your software channel and the build of your baseband and bootloader. You know how to get this information?
After a lot of tries, finally was able to go back to stock. Will be compiling a guide for other to follow with links.
On latest 7.1.1 with August patches.
Is there a problem with audio fx,
Even viper4android not working.
kkube said:
After a lot of tries, finally was able to go back to stock. Will be compiling a guide for other to follow with links.
On latest 7.1.1 with August patches.
Is there a problem with audio fx,
Even viper4android not working.
Click to expand...
Click to collapse
I'll be waiting for it.
Process to go from custom rom back to stock (August update)
There are several guides on going back from custom rom to full stock, but still I made this guide with latest links. I just went from LOS 14.1 back to full stock. Below is the step I took:
1) Download and install minimal ADB AND FASTBOOT
I used version 1.4.2 which is the latest version https://www.androidfilehost.com/?fid=745425885120698566
2) Download and install motorola drivers
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
3) Download the latest firmware
I used ADDISON_NPNS26.118-22-1 which has august security updates https://www.androidfilehost.com/?fid=673368273298986785
4) Extract the zip file (firmware) and move all its contents to the folder where you have installed minimal adb and fastboot
5) Create a text file, add the following text to it and save it as "launch.bat" in the same folder.
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
echo -------------------------------------------------------------------------
echo please scroll up and check your flash for any errors
echo -------------------------------------------------------------------------
pause
fastboot reboot
exit
Click to expand...
Click to collapse
6) Switch off your phone and open it in fastboot mode (press power and volume down button for few seconds after phone as switched off)
7) Connect your mobile to your computer
8) Click on the launch.bat file that you saved and it will install stock firmware on to your mobile. It will take a couple of minutes. (It will wipe everything on your mobile so take a backup of your important data)
9) Once the process is complete, it will ask you to enter any key, after which it will reboot itself.
Once rebooted, you will have full stock, non rooted, and latest firmware with august patches.
Is this works with European version of Moto Z Play? Like I bought it from France. Thanks.
And can we do OTA updates after doing this?
Thank you so much for this guide, my phone was rebooting to recovery every single time and nothing worked. I flashed this rom as you said and my phone just booted and it's working. I can't believe it.
Is this works with European version of Moto Z Play? Like I bought it from France. Thanks.
Click to expand...
Click to collapse
My phone is reteu and after flashing is still on reteu, so it should be fine, dont worry. Also you should get any future updates via OTA.
kkube said:
There are several guides on going back from custom rom to full stock, but still I made this guide with latest links. I just went from LOS 14.1 back to full stock. Below is the step I took:
1) Download and install minimal ADB AND FASTBOOT
I used version 1.4.2 which is the latest version https://www.androidfilehost.com/?fid=745425885120698566
2) Download and install motorola drivers
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
3) Download the latest firmware
I used ADDISON_NPNS26.118-22-1 which has august security updates https://www.androidfilehost.com/?fid=673368273298986785
4) Extract the zip file (firmware) and move all its contents to the folder where you have installed minimal adb and fastboot
5) Create a text file, add the following text to it and save it as "launch.bat" in the same folder.
6) Switch off your phone and open it in fastboot mode (press power and volume down button for few seconds after phone as switched off)
7) Connect your mobile to your computer
8) Click on the launch.bat file that you saved and it will install stock firmware on to your mobile. It will take a couple of minutes. (It will wipe everything on your mobile so take a backup of your important data)
9) Once the process is complete, it will ask you to enter any key, after which it will reboot itself.
Once rebooted, you will have full stock, non rooted, and latest firmware with august patches.
Click to expand...
Click to collapse
Thanks a lot for this guide! Just wanted to ask if it's safe and stable to root this and pass safetynet check.
Thanks for you time
Only way to root and still pass safetynet is via magisk
But unfortunately it needs a custom kernel with f2fs fix. However with 7.1 update motorola fixed it but broke some other things.
There is not a custom kernel for 7.1, so till then no way to root and have safety net.
But you can easily root via magisk
akshaypatil869 said:
Thanks a lot for this guide! Just wanted to ask if it's safe and stable to root this and pass safetynet check.
Thanks for you time
Click to expand...
Click to collapse
Only way to root and still pass safetynet is via magisk
But unfortunately it needs a custom kernel with f2fs fix. However with 7.1 update motorola fixed it but broke some other things.
There is not a custom kernel for 7.1, so till then no way to root and have safety net.
But you can easily root via magisk
Does anyone receive the update with September patch via OTA after back to stock following post #5 instructions?
This a fantastic guide - THANKS!!! - I have linked to it giving credit. Thanks!
I have also a thread, if you follow that one. Bootloader is locked/ u will be able to get ota'$
Hi all,
I'm sorry to ask this question, but I'm really struggling to get my Nexus 5X to boot into stock rom. The install seems to go ok, but there was error when flashing.. See below...
archive does not contain 'boot.sig'
archive does not contain 'dtbo.img'
archive does not contain 'dt.img'
The phone now boots to the google boot logo, then loops back to either the "Unlocked Bootloader" or the Custom OS message. (depending on the locked state of the bootloader)
I cannot get into recovery, as the phone just loops back as described above when selecting it from the bootloader option.
Can anyone advise me on how to restore the phone back to stock os. I've tried flashing version 7.1.2 8.0.0 and 8.1.0, using either the flash-all.bat or manually typing the commands. I'm 110% sure this is not to do with over heating on CPU/RAM, I have another nexus 5x that has the bootloop of death and it's bootloop is very different from what I'm seeing on this Nexus 5x.
Thanks in advance
First, the .sig errors are normal so you can ignore those. I would make sure your booloader is unlocked then manually flash the bootloader.img. Then boot back into the bootloader. Then manually flash the remainder of the partitions. Use the 8.1.0 os.
Sent from my [device_name] using XDA-Developers Legacy app
Ok here's what I've done.
1) Downloaded bullhead-opm2.171019.029.zip from Google factory images.
2) Extracted the zip to a folder and extracted image-bullhead-opm2.171019.029.zip to the same folder to get the boot.img | system.img | vendor.img and recovery.img file. (there was no userdata.img nor cache.img within the zip, so I downloaded 7.1.1 version and extracted those files too)
3) Using SDK tools ADB /Fastboot version 1.0.38, I flashed the following:-
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
fastboot flash userdata C:\bullhead\images\userdata.img
fastboot oem lock
Everything flashed without a problem, no error. However the phone still does not boot into the OS nor can I get it to boot into recovery mode.
I cannot understand what I am doing wrong. I think it has something to do with the installation of copperhead I tried. Does anyone know whether copperhead os restricts going back to stock rom due to its additional security features?
I'm stuck!!!
Thanks in advance.
pinkstink said:
Ok here's what I've done.
1) Downloaded bullhead-opm2.171019.029.zip from Google factory images.
2) Extracted the zip to a folder and extracted image-bullhead-opm2.171019.029.zip to the same folder to get the boot.img | system.img | vendor.img and recovery.img file. (there was no userdata.img nor cache.img within the zip, so I downloaded 7.1.1 version and extracted those files too)
3) Using SDK tools ADB /Fastboot version 1.0.38, I flashed the following:-
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
fastboot flash userdata C:\bullhead\images\userdata.img
fastboot oem lock
Everything flashed without a problem, no error. However the phone still does not boot into the OS nor can I get it to boot into recovery mode.
I cannot understand what I am doing wrong. I think it has something to do with the installation of copperhead I tried. Does anyone know whether copperhead os restricts going back to stock rom due to its additional security features?
I'm stuck!!!
Thanks in advance.
Click to expand...
Click to collapse
Why don't you use the "flash-all.bat" file? I'm pretty sure you're not wiping your system partition in the process you use.
i.adrian said:
Why don't you use the "flash-all.bat" file? I'm pretty sure you're not wiping your system partition in the process you use.
Click to expand...
Click to collapse
Hiya,
I have also tried using the .bat script, it leads to the same place. A phone that does not boot.
thanks in advance.
Can you boot into twrp, fastboot boot twrp.img? If you can try formatting, not wiping, the data partition. It also gives you the option to repairing some other partitions, I don't remember which ones. You could try that.
Sent from my [device_name] using XDA-Developers Legacy app