Develop Bugs

[TUT] How to get Aircrack working with Alpha awus036h Wifi Card Tf300t!

Video: http://www.youtube.com/watch?v=gvUE7lP5WME&sns=em
Okay everyone! Here is a tutorial on how to get Aircrack tools working with your Android TF300T! This gets your Alpha Card working with all the drivers in android so you can use it in Backtrack!
CREDITS: I do not take credit for the drivers I simply put all the information together.
Requirements :
Rooted Device
4 GB Free Space
USB Port or for a Phone an Adapter that can provide power like a HUB
An Alpha awus036h wifi adapter
Android 4.0 or higher that supports USB Host Mode
A brain!! :yeye:
Required Downloads:
Backtrack 5 installer APP - IN Files.zip
RootFileExplorer - IN Files.zip
Required Drivers
Terminal App - IN Files.zip
Android VNC - IN Fiiles.zip
Modules App - IN Files.zip
Required Files.zip - https://www.asuswebstorage.com/navigate/share/GY4I6766V4
First install all apps.
Follow the guide in Backtrack 5 installer APP to set up your BT5 install.
Next boot up backtrack and compile and install Aircrack!
In a backtrack terminal issue the following commands to install Aircrack:
http://pastebin.com/tPM8Qshp
Once complete stay in the terminal and get wicd manager
apt-get install wicd
Now that is done download the Alpha drivers and extract them to your system
/lib/modules folder.
Drivers: https://www.asuswebstorage.com/navigate/share/GY4JP966V4
Next TURN OFF YOUR WIFI
The drivers conflict with the internal wifi. You need to reboot to gain your normal wifi again!
Open the Modules app and open the system tab and select the 3 drives your extracted and save them!
eeprom_93cx6.ko, mac80211.ko, rtl8187.ko
Make sure to go to the settings in the Modules App and un-check load at boot!
Now connect your Alpha Wifi card and open up your backtrack terminal and type:
/etc/init.d/dbus start; /etc/init.d/wicd start
Then Type
ifconfig wlan0 up
Put your card in monitor mode: airmon-ng start wlan0
Thats it! :thumbsup:
Just start using aircrack or download reaver and your set!
If you want to use reaver just download it in your bt5: http://code.google.com/p/reaver-wps/downloads/list
Here is a good reaver tut: http://www.hackforums.net/showthread.php?tid=2079678
I know this is a fairly basic tutorial but I am a very busy guy these days!! I hope you get this working!

This is absolutely fantastic, will try this later on during the day. Thank You!

Great share!Thanks for your work!

jsantiago.antonio said:
This is absolutely fantastic, will try this later on during the day. Thank You!
Click to expand...
Click to collapse
Thanks! Enjoy, this is a great reason to own a tabet.

Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.
I followed the instructions perfectly. any help?

xplained said:
Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.
I followed the instructions perfectly. any help?
Click to expand...
Click to collapse
Its really straight forward. Just follow the onscreen instructions as best as possible. Make sure you downloaded the script during the instructions. Also make sure the files are all extracted to a folder on your sdcard named backtrack

xplained said:
Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.
I followed the instructions perfectly. any help?
Click to expand...
Click to collapse
I apologize if this is obvious and you have already done this, but, Try Typing: su (Enter) at the start of your terminal session to enter superuser mode.

Okay, gonna try asap.
Thanks. I'm wait more positive results for insert it on the index
Good work.

Guys ive got a question. What does aircrack do anyway?

BryanSo said:
Guys ive got a question. What does aircrack do anyway?
Click to expand...
Click to collapse
It is a command line tool which lets you *cough* *cough* test the security of your own or other people's networks. Basically if aircrack is able to discover the password on your network in a relatively short amount of time (a couple of hours) you or whoever's network it is needs to boost their security.

xplained said:
Hey i got an error while entering sh backtrack.sh command. It says,
backtrack.sh[6]: cut: not found
this script requires root! Type:su.
I followed the instructions perfectly. any help?
Click to expand...
Click to collapse
first make sure you have supersu not the normal su.apk. also usb debugging must be on.

afzalarsalan said:
It is a command line tool which lets you *cough* *cough* test the security of your own or other people's networks. Basically if aircrack is able to discover the password on your network in a relatively short amount of time (a couple of hours) you or whoever's network it is needs to boost their security.
Click to expand...
Click to collapse
Cool Imma try this

Spark1223 said:
first make sure you have supersu not the normal su.apk. also usb debugging must be on.
Click to expand...
Click to collapse
sorry. supersu? what's that? anyway to the others, yes my first terminal command is su.

You need busy box and it won't work without an external wireless card.

Spark1223 said:
You need busy box and it won't work without an external wireless card.
Click to expand...
Click to collapse
That is correct. I will add busybox to the list of requirements. I forgot to add that one.

can you do this with a different wireless card?

Spark1223 said:
can you do this with a different wireless card?
Click to expand...
Click to collapse
2nd this post specifically Verizon us 4g aircard
Sent from my Transformer Prime TF300T using xda premium

im running AKOP ROM and this dont work.
I followed all instructions and I get I/O errors in terminal when its mounting before it using the backtrack install apk.

dfoote626 said:
2nd this post specifically Verizon us 4g aircard
Sent from my Transformer Prime TF300T using xda premium
Click to expand...
Click to collapse
You should be able to use this method to install drivers from other wireless cards... HOWEVER, you need to go to backtrack's website (google it), and check the wiki to make sure your wireless card is capable of "injection"
http://www.backtrack-linux.org/wiki/index.php/Wireless_Drivers

shrumhead said:
You should be able to use this method to install drivers from other wireless cards... HOWEVER, you need to go to backtrack's website (google it), and check the wiki to make sure your wireless card is capable of "injection"
http://www.backtrack-linux.org/wiki/index.php/Wireless_Drivers
Click to expand...
Click to collapse
I'm pretty sure mine is. Has the following chipset, discovered when I use a pc with backtrack: ASUSTek Computer, Inc. RT2573 - using the mac80211 rt2500usb/rt73usb drivers
Its one of the ones listed. Don't I need to compile the .ko modules for ARM? If so, how do I do this and where do I find them?

Skype Metro - Preview Edition

I hope this is the right section for this topic.
Download link:
http://www.mediafire.com/?behp744yizc91dt
Download and unzip.
Right-click on "Add-AppDevPackage.ps1" and choose the option "Run with Power Shell"
Follow the instruction.
You need a hotmail account to login during the installation.
Screenshot below.

no0b4v3r said:
I hope this is the right section for this topic.
Download link:
http://www.mediafire.com/?1er3njq7jh17h8h
Download and unzip.
Right-click on "Add-AppDevPackage.ps1" and choose the option "Run with Power Shell"
Follow the instruction.
You need a hotmail account to login during the installation.
Screenshot below.
Click to expand...
Click to collapse
Thanks i installed, but cant seem to find the program in start/metro menu ?
EDIT: fixed deleting the "Dependencies" folder (or at least the VCLibs dependencies within the folder) in the Package Install folder - the one where you run the PowerShell command to install the app.
Then reinstall.

punkmonkey1984 said:
Thanks i installed, but cant seem to find the program in start/metro menu ?
EDIT: fixed deleting the "Dependencies" folder (or at least the VCLibs dependencies within the folder) in the Package Install folder - the one where you run the PowerShell command to install the app.
Then reinstall.
Click to expand...
Click to collapse
This way it didn't work :-/

punkmonkey1984 said:
Thanks i installed, but cant seem to find the program in start/metro menu ?
EDIT: fixed deleting the "Dependencies" folder (or at least the VCLibs dependencies within the folder) in the Package Install folder - the one where you run the PowerShell command to install the app.
Then reinstall.
Click to expand...
Click to collapse
I am also facing the same problem. Can you elaborate on how to install? Thanks.
--imax98

The design looks really nice... Are you going to add protocol to it, so that App's can launch to it or certain links, etc?

imax98 said:
I am also facing the same problem. Can you elaborate on how to install? Thanks.
--imax98
Click to expand...
Click to collapse
I installed but could not get a icon to appear to launch the program.
Reboot, delete the Dependencies folder which is in the folder that you downloaded and extracted.
Then re-run the set-up, this worked for me.

punkmonkey1984 said:
I installed but could not get a icon to appear to launch the program.
Reboot, delete the Dependencies folder which is in the folder that you downloaded and extracted.
Then re-run the set-up, this worked for me.
Click to expand...
Click to collapse
Well it worked for even without rebooting!
sj.

I like it
Pretty good design, got glitchy when i clicked on "about" and when i snapped it to the size and unsnapped it. Pretty good for a beta.

snOwjAwk said:
Well it worked for even without rebooting!
sj.
Click to expand...
Click to collapse
Should work , although I did just to make sure, it's only going to reinstall but with out the dependencies.
From my fingers to your face.

it would be nice if someone made a whatsapp version for win8

Hey where is it supposed to load the contacts since its on for like 5 mins and i still dont have my skype contacts

This looks great! After deleting the dependencies folder installed and runs like a charm! Good Job... Is there a way to add new contacts in this or accept requests though? I just don't see the option.
Great work!

luizmeme said:
it would be nice if someone made a whatsapp version for win8
Click to expand...
Click to collapse
+1 !

luizmeme said:
it would be nice if someone made a whatsapp version for win8
Click to expand...
Click to collapse
I totally agree.

Thanks
Works great :good:

icons Changed
i downloaded and tried to install as said in description but it was unsuccessful. then i noticed a weird thing.. All the buttons of metro changed. i dont know what went wrong and its really annoying to see such buttons.. Plez Help.
Screenshot on the Attachment!
:crying:

Worked like a charm! Thank you! For those trying to install: You can leave the Dependencies folder just where it was... for me it was working fine with, but gave an error without. One last thing: There doesn't seem to be an option to log out... I had to kill it via taskmanager lol...

Worked great. Thanks!
PS: Some other nice app available for Metro? I didn't find many... yet.

Any updates on this one?
it looks great, but i can't make/receive group calls

marclooman9 said:
+1 !
Click to expand...
Click to collapse
Basically they should include more social networks in the already existing messaging app
Sent From My YP-G1 running ICS build 3.5

[HOW TO][GUIDE] VPN Without Security Lockscreen

I dont know how many other people out there use androids built in vpn, but i hate the fact that you are required to use a security screen (pattern, pin, password) to do so. I have found a way to bypass this if you are rooted. This has only been tested on the stock kk rooted ota. However i would think it is the same on almost any stock based rom.
This assumes you already have your vpn and a security screen setup and working.
Go to the market and download a root capable data base (db) editor. I use SQLite Editor which is a paid app, but im sure there are free ones too.
Open the db editor. SQLite Editor sorts it by the app (in this case Android System) the data base is associated with, others may not work this way and may require you to navigate to the db file directly (/data/system/locksettings.db).
Open locksettings.db and select the locksettings directory. Look for the line that says "lockscreen.password_type". Under the value colum it will show some random number. Select the line and edit the value to be 0 (zero). Save if required by your db app, and restart your phone.
When it reboots you should no longer have a security lock screen only the swipe up screen. When you go to settings - more - vpn, it will still say you need to setup a security lock. Hit CANCEL, and it will show you your list of setup vpn's. Select one and connect. Boom working vpn with no pattern, pin, password screen required.
To undo this just go to settings - security - screenlock, and setup a new lock pattern, pin, or password.
You can also disable the swipe up lock screen by editing the "lockscreen.disabled" value in the locksettings.db to be a 1 instead of a 0.

good write up, thank you sir.

Where did you get stock kk rooted?
Sent from my HTC One

I was already unlocked and s-off, so i ruu'd took the kk ota and then rooted it. But i believe santod has his thread in development where you can download the stock rooted kk rom.

an alternative method
An add-on alternative update for relevancy. Using Samsung Note 3 4.3 MJ7 stock rooted.
Firstly, thanks OP for a nice clear guide for all on how to do this theoretically.
This is an alternative for those who aren't able to purchase SQLite Editor:
1. get a good freeware SQLite editor like for example SQLite Studio @ w w w sqlitestudio.pl
2. copy following files from your phone to the PC using some form of file explorer or whatever methods you can think of
/data/system/locksettings.db
/data/system/locksettings.db-shm
/data/system/locksettings.db-wal
3. open up the editor, load the locksettings.db and modify like what OP has mentioned
4. you will notice that the new saved DB is going to be a single file instead so just replace this file back into your phone and delete the OTHER files
5. reboot and done.
:highfive:

Alternative method
found it on another forum
The process does not require rooting its more like a bug
worked on my i9300 with 4.3 firmware
1. Add a VPN
2. Lock the device with a pin
3. Enter the pin wrong 5 times
4. Press OK to the message that pops up
5 Press Forgot Pin
6. Sign into your Google Account
7. Select pin lock
8. Press cancel.
and now u got unlocked screen with working vpns

the method works, but after I reboot, when I enter VPN screen is aks me for "password for credential storage"... how can I solve? thanks in advance

Hirishiolo said:
the method works, but after I reboot, when I enter VPN screen is aks me for "password for credential storage"... how can I solve? thanks in advance
Click to expand...
Click to collapse
Yeah i have the same issue (nexus 10 rooted 4.4.3 stock)

Hit cancel, and it should bypass it.

cmlusco said:
Hit cancel, and it should bypass it.
Click to expand...
Click to collapse
it should.... but it does not for me (Sony Xperia Z1 with CM11 4.4.3)

schickel said:
it should.... but it does not for me (Sony Xperia Z1 with CM11 4.4.3)
Click to expand...
Click to collapse
same for me, it does not work

ebackbone said:
An add-on alternative update for relevancy. Using Samsung Note 3 4.3 MJ7 stock rooted.
Firstly, thanks OP for a nice clear guide for all on how to do this theoretically.
This is an alternative for those who aren't able to purchase SQLite Editor:
1. get a good freeware SQLite editor like for example SQLite Studio @ w w w sqlitestudio.pl
2. copy following files from your phone to the PC using some form of file explorer or whatever methods you can think of
/data/system/locksettings.db
/data/system/locksettings.db-shm
/data/system/locksettings.db-wal
3. open up the editor, load the locksettings.db and modify like what OP has mentioned
4. you will notice that the new saved DB is going to be a single file instead so just replace this file back into your phone and delete the OTHER files
5. reboot and done.
:highfive:
Click to expand...
Click to collapse
Thank you :good:

ebackbone said:
An add-on alternative update for relevancy. Using Samsung Note 3 4.3 MJ7 stock rooted.
Firstly, thanks OP for a nice clear guide for all on how to do this theoretically.
This is an alternative for those who aren't able to purchase SQLite Editor:
1. get a good freeware SQLite editor like for example SQLite Studio @ w w w sqlitestudio.pl
2. copy following files from your phone to the PC using some form of file explorer or whatever methods you can think of
/data/system/locksettings.db
/data/system/locksettings.db-shm
/data/system/locksettings.db-wal
3. open up the editor, load the locksettings.db and modify like what OP has mentioned
4. you will notice that the new saved DB is going to be a single file instead so just replace this file back into your phone and delete the OTHER files
5. reboot and done.
:highfive:
Click to expand...
Click to collapse
i have followed your tutorial and the OP's but when i edit locksettings.db there is no such line "lockscreen.password_type"
i am on kk 4.4.2

vadimo said:
i have followed your tutorial and the OP's but when i edit locksettings.db there is no such line "lockscreen.password_type"
i am on kk 4.4.2
Click to expand...
Click to collapse
My locksettings.db is empty as well. Does anybody know why?

Geilerzucker said:
My locksettings.db is empty as well. Does anybody know why?
Click to expand...
Click to collapse
on mine one its not empty

Hirishiolo said:
same for me, it does not work
Click to expand...
Click to collapse
i also followed the tutorial now and same as you guys, doesnt work

worked for me initially on samsung mega (jellybean), but after reboot i'm getting the 'enter password for creditial storage' issue and pressing cancel doesn't solve it.
is there any other solution?

In 4.4 there is no such file
Code:
/data/system/locksettings.db
.. any ideas?

Clauu said:
In 4.4 there is no such file
Code:
/data/system/locksettings.db
.. any ideas?
Click to expand...
Click to collapse
Try a different file manager.
It failed like that for me with ES File Explorer,
but worked when I used SM File Browser.
---------- Post added at 10:53 AM ---------- Previous post was at 10:42 AM ----------
vadimo said:
i have followed your tutorial and the OP's but when i edit locksettings.db there is no such line "lockscreen.password_type"
Click to expand...
Click to collapse
Tap on the "QUERY *" button to see the file contents.
---------- Post added at 11:11 AM ---------- Previous post was at 10:53 AM ----------
pajenn said:
worked for me initially on samsung mega (jellybean), but after reboot i'm getting the 'enter password for creditial storage' issue and pressing cancel doesn't solve it.
Click to expand...
Click to collapse
What I do here: just type something.. anything, doesn't matter. At least one character.
Then on the next screen, where it asks to set up a lockscreen, just Cancel.
This seems to be necessary once per boot -- any password, different time or the same, works.
After that it lands me on the VPN manager screen, all functional.

Well I kind of messed up. I tried to open with SQLite but it would give me an error 14. So i decided to try to open just like that using ES Explorer and edit it like regular note(SQL is totally different I had no idea). Anyways i didnt edit anything but now i cant set a pin or any type of security on my phone. When i try to set up a pin it still shows a swipe and when i try again my Note 3 freezes and get an error message saying settings stopped responding.
Any idea on how to fix this? Im rooted and im running the latest firmware 4.4.2 if that helps.

**Request** Phone app to sideload apk's

I would donate if someone would code an app to sideload apk's from your phone. Would make it so much easier, rather than breaking out the laptop.
Thanks.

..

Yea, I've done it that way...an app with a gui would be more user friendly though. Just a thought...

If you mean any app instead of just paid apps on your phone,there is an invaluably easier way to sideload apk files.
Terminal Emulator will be needed for a few initial steps,unless you don't have unknown sources hacked to enabled which requires root.
If no root access and disabled unknown sources,you will need to use it every time.
1.Install Terminal Emulator on your Fire TV with your current sideloading method.
2.Either use the Terminal Emulator,or the same ADB method to also sideload a browser like Opera or any other browser. (will need keyboard and mouse)
3.Use the web browser to download apk files to install using Terminal Emulator. (or from a file explorer if rooted to enable unknown sources)
4 (optional).Install 1mobile,Aptoide, and/or Appchina for easier access to apps for installing normally or using Terminal Emulator.
Hope this helps,even if just a little.

tdfsu said:
I would donate if someone would code an app to sideload apk's from your phone. Would make it so much easier, rather than breaking out the laptop.
Thanks.
Click to expand...
Click to collapse
This is how I send apps from phone to fire tv stick.
1. Install ES file explorer and myappsharer on phone.
2. Sideload ES file explorer on ftvs (can't see why it won't work the same on ftv)
3. Open myappsharer on phone and ES on ftv, tick the apk setting in myappsharer then select apk to share. Choose the ES option then ES send by Lan, accept the transfer on ftv.

Mobizen works on my phone & pc. I tried installing it on the FTVS but once again the remote will not let me click the needed check boxes to accept the EULA on the app. If one can get past that it should work.

tdfsu said:
I would donate if someone would code an app to sideload apk's from your phone. Would make it so much easier, rather than breaking out the laptop.
Thanks.
Click to expand...
Click to collapse
Just found what you're looking for, tested it myself & it works with no glitches (except currently there's no status bar to let you know the app has been installed):

adfurgerson said:
This is how I send apps from phone to fire tv stick.
1. Install ES file explorer and myappsharer on phone.
2. Sideload ES file explorer on ftvs (can't see why it won't work the same on ftv)
3. Open myappsharer on phone and ES on ftv, tick the apk setting in myappsharer then select apk to share. Choose the ES option then ES send by Lan, accept the transfer on ftv.
Click to expand...
Click to collapse
If you just download an APK you can share it straight from ES File Explorer.

EL TEJANO said:
Just found what you're looking for, tested it myself & it works with no glitches (except currently there's no status bar to let you know the app has been installed):
Click to expand...
Click to collapse
Is there an official thread for this?

Easy Way.
#1 Install APk Extractor On your Phone (android phone/tablet)
#2 install google drive, configure your account
#3 extract APK , upload to GDRIVE
#4 install ES File Explorer on Fire TV/STICK
#5 install via fire tv using ES File Explorer

You can install airdroid on your phone and chrome on your fire tv. There is an option to download apps that are installed on your phone from the airdroid gui. Once that is downloaded you can navigate to the download folder to install the apk. I've been doing that lately, as I found it easier than trying to get market helper to work.

Y.G. said:
Is there an official thread for this?
Click to expand...
Click to collapse
Not that I've seen. Found it on the Play Store (The German or Dutch version I'm guessing)
https://play.google.com/store/apps/details?id=com.dlka.fireinstaller&hl=de
Can also be found on GitHub:
https://github.com/The1andONLYdave/fireinstaller

Um, did nobody see the thread near the top of this forum?
http://forum.xda-developers.com/fire-tv/themes-apps/fire-tv-loader-app-android-t2963536
playstore link: https://play.google.com/store/apps/details?id=com.aftv.sideloader

PsycloneTW said:
Um, did nobody see the thread near the top of this forum?
http://forum.xda-developers.com/fire-tv/themes-apps/fire-tv-loader-app-android-t2963536
playstore link: https://play.google.com/store/apps/details?id=com.aftv.sideloader
Click to expand...
Click to collapse
I did and it works great. Never could figure out what this thread was about.

PsycloneTW said:
Um, did nobody see the thread near the top of this forum?
http://forum.xda-developers.com/fire-tv/themes-apps/fire-tv-loader-app-android-t2963536
playstore link: https://play.google.com/store/apps/details?id=com.aftv.sideloader
Click to expand...
Click to collapse
schneid said:
I did and it works great. Never could figure out what this thread was about.
Click to expand...
Click to collapse
Two different apps. Nothing wrong with choice and options.

Complie Ubuntu Desktop On Your Phone And Run It

*Iam not responsible for bricked devices,Do this at your own risk
Hi of all
You need a 2048MB space empty at least
first you need to download some app*you shoud root your phone
*Busybox special version
https://play.google.com/store/apps/...x+apk&pcampaignid=APPU_1_56j4V_OrAYGuad6nsdgG
*Linux Deploy
https://play.google.com/store/apps/...y+apk&pcampaignid=APPU_1_D6r4V6yBJ8X5aPu8g7AF
*Vnc
https://play.google.com/store/apps/...c+apk&pcampaignid=APPU_1_v6r4V6_3A4Wxa-CfgogF
Or you can install another vnc app
Now Do
give the apps root premissions if it asks
1-open busybox and press install then wait to finish and close
2-open Linux Deploy then press download icon and change the settings*to this
HTML:
Distribution*ubuntu
Distribution suite*trusty (it is ubuntu 14.04) or you can choose another
installation path*for cm /storage/sdcard0/linux.img *for touchwiz rom don't edit it
image size*write what your size want 2048 (recommended) if you want more (4096)
password*copy it you will need it on vnc app
Desktop environment(on bottom)*(mate,Xfce,LXDE like icons desktop) (XTerm like text commands) choose what you want
Gui(block in bottom)
Enable*press true
go to gui settings and do that
Depth*24
DPI*100
Width*1280
Height*720
Now back and press on three dot and press install
Installation depends on the speed of your Internet
3-When the install finish open vnc apps press red plus and write for address"localhost" and for Name"android"
then press create then press conect if app ask for password paste
And enjoy Do not forget to click on thanks
screenshots

Thanks! Everything is working,
if for someone su permission is not working or cant use apt
go to linux deploy, tap stop, tap settings change username to root and password to toor and tap reconfigure.

Looks great! I'll be trying this out as soon as I get Multirom set up. Thank you.

Help i get this

paulo boë said:
Help i get this
Click to expand...
Click to collapse
What is Desktop environment?is it kde or not if it is can you send screenshot from your linux deploy when you press start
and enable debug mode from three dots in bottom

MSandMan said:
What is Desktop environment?is it kde or not if it is can you send screenshot from your linux deploy when you press start
and enable debug mode from three dots in bottom
Click to expand...
Click to collapse
That is on my s3 neo, but now i tried it on my j5 and it says that i have to install busybox, but i have it installed.

paulo boë said:
That is on my s3 neo, but now i tried it on my j5 and it says that i have to install busybox, but i have it installed.
Click to expand...
Click to collapse
You shoud install busybox in this theard on top just

This

paulo boë said:
This
Click to expand...
Click to collapse
Try this installation path=/sdcard/linux.img
and it will work

MSandMan said:
Try this installation path=/sdcard/linux.img
and it will work
Click to expand...
Click to collapse
That didnt work, i had to /storage/emulated/0/linux.img
But now its in progress.