When I reboot my phone I only can get into TWRP, I tried also rebooting in system inside of TWRP.
How can I fix this?
Related
Hi. I've just updated CM13 to the latest nightly using TWRP, but now the system just boots into TWRP - that's whether I select boot system, recovery, or bootloader. I tried restoring from a TWRP backup or another copy of the nightlies zip - it all seems to work fine but doesn't solve the problem. I can connect to the 'recovery' device using adb but adb restart bootloader just loads TWRP again. I've tried wiping first the dalvik/cache, then everything but the internal card, then finally everything but nothing seems to work.
I did get something a little bit like this a few days ago because SuperSU was complaining that I needed to update the binary. I let it do it the way that it suggested one does when TWRP is installed and afterwards couldn't reboot into system, but after a few minutes of frustration sorted things by wiping various partitions.
I attempted to load the full system restore files (cm-13.1-ZNH2KAS29G-crackling-signed-fastboot-74bb753396.zip) using TWRP but that didn't work (I imagine because they're designed to be run via fastboot). I tried loading them via the ADB sideloader option included in TWRP but it failed after a few seconds (I think the message was 'transmitting 0.0x'
I opened that zip and copied the various files to the external card, but I then baulked at installing the image files manually because the only partition option I'm given is boot and my understanding is that each image file should go into its own partition.
The only other potentially pertinent information I can think of:
TWRP keeps reporting "E: Unable to find partition size for '/recovery'"
Has anyone got any ideas please? I had been musing that my next phone would have OTG and NFC, but I wasn't planning to upgrade just yet if I don't absolutely have to.
Have you got it fixed? And if yes - how? I am stuck in a similar situation and can't find a solution for it. Tnx in advance.
I had formatted all things including internal storage using twrp. After that I flashed oxygen os 4.0 with USB using twrp.Installation is successfull.But when I rebooting the system it still boots into TWRP screen.I am not able to see one plus boot logo as it always boots to twrp screen even after successfully installation.I am wondering why even after succesfull flashing still the phone always boot into twrp screen.Pls help in resolving the issue
Flashing a lower version and then the 28 version back helped me... Had the same problem
jaganmohans said:
I had formatted all things including internal storage using twrp. After that I flashed oxygen os 4.0 with USB using twrp.Installation is successfull.But when I rebooting the system it still boots into TWRP screen.I am not able to see one plus boot logo as it always boots to twrp screen even after successfully installation.I am wondering why even after succesfull flashing still the phone always boot into twrp screen.Pls help in resolving the issue
Click to expand...
Click to collapse
1 ) flash stock recovery and sideload full zip of 3.2.8 oxygen os
2) boot to system
3) reboot to stock recovery
4) sideload full zip of 4.0.1
5) boot to system
6) boot to bootloader and flash twrp -28 recovery (adb fastboot flash)
7) after flashing boot to twrp recovery from bootloader
8) flash SU SR2 v2.79 and boot to system
Hi everyone,
I tried to update my rooted Pixel C with Android 8 and TWRP 3.1.0.0 from August build to September build with FlashFire.
All of the following have I done on my Nexus 5x as well and it worked as a charm there.
Therefore i dl'd the corresponding zip-file from google dev page and started the update with FF. It said to me it can update the boot, system, recovery and vendor partition so I unchecked the recovery partition only to keep TWRP. I also told FF it should include SuperSU again to root the new Android.
After the update the device was unrooted, so i tried to start into recovery to install superSU manually. But TWRP was gone and i get everytime the android on the back with the text "no command".
Therefore I tried to flash TWRP with NRT again. But after the flash the device always starts into TWRP and Android isn't starting anymore.
I can use NRT again to flash Android without loosing my data but than TWRP is gone again.
So either the device always starts into TWRP or I have no recovery installed.
Anyone an idea what i can do to flash TWRP again and to fix the boot order or whats broken than?
Regards,
flattervieh
I don't have the C but here's what I would try. First, have your device booting normally with the stock recovery. Then use fastboot to boot into TWRP, not flash it. When it boots into TWRP then flash supersu. From TWRP then boot back into the bootloader and then flash TWRP with fastboot.
Flash the latest (beta?) TWRP. It allows reading the encrypted data folder.
Short notice, i'm still struggling with the problem.
In the meantime I tried the following:
1. I temporarely booted TWRP 3.1.0.0, with this version I was not able to encrypt the data partion (always invalid key) but I was able to see the system partition and I installed SuperSU. After that i restarted into the bootloader and flashed TWRP 3.1.0.0.
This led to the same phenomenon, that my pixel always boots into TWRP and not into Android itself.
2. Same thing as before but with TWRP 3.1.1.1.
With this version I was able to see the size of the data partition, but I was also not able to read or write onto it. (Again invalid code) I installed SuperSU and made a device restart without flashing TWRP 3.1.1.1.
This led to a totally softbricked device with a boot into "no command" screen.
After flashing Android again via fastboot Android starts correctly and I can use the device but root is still not working.
Regards
I'm not sure why twrp isn't sticking. But the android on its back with "no command"is the stock recovery. To get into it simultaneously press and release the power and vol up keys. You might have to try it a few times as the timing can be very finicky. From there you can boot into the system, you don't need to flash the factory image and start all over.
I'm trying to install LineageOS 17 on a OnePlus 6.
I can boot into twrp and the install process appears to work successfully. I can swap slots and install into either slot.
When I reboot the phone I get to the screen that says "Start" and "Fastboot mode" at the top. If I try to start the phone it comes back to this screen. When I go back into twrp, the contents of /sdcard is empty. I can copy over files using adb push, install the rom and then reboot. However, every time I reboot it seems like it completely wipes the phone including the install it's just done and /sdcard is also wiped.
When I booted into twrp previously, it required my unlock code. It now no longer does that. I wonder if this is part of the problem?
If I install just oxygenos, it takes me to the oxgenos recovery screen but I cant' do anything from there. I'm guessing that won't allow me to boot with an unlocked bootloader?
Can anyone advise how I can get out of this? Installing anything using twrp looks like it works, but it's like it gets wiped every time I reboot.
I can't even seem to get OxygenOS back to working.
Can anyone give me some tips on where to go from here? Nothing I can do from TWRP seems to help. I have tried wiping everything in both slots and reinstalling oxygen, no luck
Still stuck?
Hello,
I have a strange problem with Galaxy A5 2017 after installing twrp + lineage 18.1. I will explain the problem in sub points.
1) in January on stock software I installed (according to instructions from XDA forum) root, twrp (via ODIN) and bypass with memory decryption. Then I installed Lineage 18.1, Gapps, Magisk and debloater on it to remove unnecessary apps.
2) The phone worked fine until mid-April. Some update was installed and the phone died.
3) The phone wouldn't boot up after the update and only the TWRP logo was looping (logo kept flashing).
4) the phone couldn't boot up, but after I found the only way to get the system to boot up was to enter command "adb reboot bootloader" from windows console. The system booted, but after another reboot unfortunately it was the same thing - the TWRP logo was looping.
5) I managed to upload Lineage Recovery via ODIN, but unfortunately this didn't change anything. Phone was booting to recovery only (but it was working). I tried to update via ADB Sideload from recovery - also without success. Interestingly, the only way to fix it was to fully format with the system partition from recovery and re-upload the system. This worked, and Lineage booted into the android interface, but on the next reboot I unfortunately only had the Lineage loading logo visible for 10-15 minutes - then a reboot into recovery. I had to repeat the formatting and re-upload the system.
6) Interestingly, when I used the combination - lineage recovery, full format, twrp 3.6.1 (via ODIN) - TWRP booted normally and I could install LineageOS. The system would only boot once, and after the next reboot the TWRP logo would loop again.
7) The last problem I noticed is that if I load Lineage system, gaaps package and magiska via TWRP or Lineage Recovery, the system will never boot - either it will loop the logo (if using Lineage Recovery) or the phone will not load the system, it will reset and loop the TWRP logo indefinitely (if using TWRP recovery).
Does anyone know a solution how to restore the phone? Will it still work or for example NAND memory is dead and nothing can be done? Best regards