Develop Bugs

HTC One X Bricked.. Help Needed

First of all, I want to tell that I am a beginner and do not know much about rooting and custom ROM installation.
Few days back, I became very keen to know what is custom ROM and is there any custom ROM available for my HTC One X. I searched through internet and found one, downloaded it. Rooted my phone, Unlocked bootloader. After that I installed CWM touch recovery. Everything was going great. Then, I first flashed the kernel given along with that custom ROM. it Flashed. Then, I flashed that Custom ROM. I Showed an error. I flashed it twice or thrice but it stucked on that error. Also in a Hurry, or Excitement, I forgot to take a backup of my previous ROM. After that, I switched on my phone it does nothing and stucked at HTC Bootscreen. I factory reset my phone, it wiped all data from phone. I Thought, a RUU would work, but it also doesn't worked.
I went to HTC Service Center, they are saying that motherboard will be replaced, which is almost of same cost of phone. I cannot spend so much.
I tried so many ways, but nothing worked.
So, I am Finally here seeking help from Experts. Any help will be highly appreciable.
Sorry for my bad English.
Details :
HBoot: 1.73
S-ON
Endevouru

Try this, flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Make a full wipe and install the rom.zip. and flash the boot.img from the rom.zip
What rom were you trying to flash ?

If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..

a.broken.star said:
If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..
Click to expand...
Click to collapse
You mean this one
https://www.dropbox.com/s/14c1ikgsp38axwv/twrp-recovery2.img

Righto...:thumbup:

i was trying to flash MaximusHD rom.
and Philz recovery i have tried already. The problem is I do not have access to storage. All i have is Bootloader access. and nothing on my phone

Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom

Mr Hofs said:
Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom
Click to expand...
Click to collapse
i have tried this too.. no ROM is being flashed. everytime it ends with some error(s)

What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !

Mr Hofs said:
What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !
Click to expand...
Click to collapse
1. Bootloader was unlocked, i have relocked it. I'll unlock it. no Issues.
2. I have tried CWM philz touch custom recovery. I'll install it again
3. It do not have any ROM at present. Earlier it had 4.2.2 JB Stock ROM
4. Yes, I flashed boot.img. Nothing worked

1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app

HD2Bastler said:
1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app
Click to expand...
Click to collapse
sorry for this stupid question. But how to use ADB Sideload..??

Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !

Mr Hofs said:
Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !
Click to expand...
Click to collapse
ok i will try this and will be back with whatevr result comes out....

I bricked mine too , this is what I did
mohitsinghl said:
ok i will try this and will be back with whatevr result comes out....
Click to expand...
Click to collapse
If that doesn't work try this , this is what I did when I bricked my HTC One X:
1. Download Fastboot
2. Download adb
3. Download cm-10.2.1-endeavoru.zip (https://download.cyanogenmod.org/?device=endeavoru)
(I used this one , it's justs so you get your SD Card Working again and you can
put ROMS and everything on it again)
4. Download openrecovery-twrp-2.4.0.0-endeavoru-JB (http://techerrata.com/browse/twrp2/endeavoru)
(This one will be used because it has touch ability's and you can install ROMS with it )
4.1 Or you can download recovery-clockwork-touch-6.0.4.7-endeavoru.img (a.k.a Philz recovery)
(This one will be used because it has touch ability's and you can install ROMS with it )
( I used Philz recovery 5.15.9.img (provided by Mr Hofs -> who is a great guy btw)
5. Download openrecovery-twrp-endeavoru-2.1.7 (http://techerrata.com/browse/twrp2/endeavoru
(This one will be used for adb push commands, openrecovery-twrp-endeavoru-2.1.7 has a built
in ability for your sd-Card , adb can recoginze it but the problem is your touch will not work.)
6. Go into bootloader -> fastboot and do this:
6.1 fastboot flash recovery openrecovery-twrp-endeavoru-2.1.7.img
7. Go into recovery (Hboot -> recovery)
7.1 just open the recovery, your touch will probably not work. DONT LOCK IT JUST LEAVE IT OPEN
(ADB sideload didn't work for me so that's why we are going to do this)
IF YOUR TOUCH WORKS YOU CAN SKIP STEP 8
7.2 do this command: adb devices
If you don't find your devices in this then the next steps will not work.
YOU HAVE TO SEE YOUR DEVICE
7.3 do this command: adb push cm-10.2.1-endeavoru.zip /sdcard/
You can only do cm-10.2.1-endeavoru.zip if the zip file is located in the same folder your using
with command. I'm not sure about /sdcard/ . I cant remember anymore But this will put the
but this will put the zip Directly on your SDcard.
8. Go to bootloader -> fastboot
8.1 do this command: fastboot flash recovery openrecovery-twrp-2.4.0.0-endeavoru-JB.img
8.2 or do this command: fastboot flash recovery Philz recovery 5.15.9.img
Your touch wasn't working but it will work now.
9. Go to booloader -> fastboot
9.1 extract the boot.img from the Download cm-10.2.1-endeavoru.zip into the fastboot folder
9.2 do this command fastboot flash boot boot.img
9.3 fastboot erase cache
10. Go back to recovery
10.1 Wipe User Data
10.2 Wipe data cache
10.3 Go to advanced -> wipe Dalvik Cache
11. Install zip from sdcard
11.1 Choose cm-10.2.1-endeavoru.img
11.2 Install the zip WITH full wipe
12. After the install, reboot. You should have a full functional HTC ONE X now
13. Now but your ROM's(ZIP FILES)/Recovery(ZIP FILES)/Kernels and everything you want on your HTC because
You can see your HTC on your PC again!

I tried adb push.. But i cant find the pushed zip on sd card in recovery.. Moreover i tried flashing using fastboot command i.e. fastboot flash zip rom.zip it ended with an error <remote not allowed>
Sent from my Titanium S5 using XDA Free mobile app

For maximus hd do this :
Flash Philz 5.15 and mount the sdcard and wait literally minutes to let the sdcard pop up, copy the rom, do a full wipe and install it then also flash the boot.img from the maximus rom in the bootloader and reboot the phone
Don't make this so hard on yourself !

Philz 5.15 recovery is not flashed. And ended with an error 0xa . any other way??
Sent from my Titanium S5 using XDA Free mobile app

Uhm really.....second time : post the error/your taken steps ! I'm not playing a game of sharades here ......
If it's not flashed you are doing something wrong

Please don't get angry on me.. M a beginner.
Okey now i have managed to flash philz recovery version 6 i.e. philz touch 6 but still cant get storage popup on my pc. I waited 30 mins after clicking mount /storage/sdcard0
Sent from my Titanium S5 using XDA Free mobile app

Can't install anything in TWRP

i cannot install anything in TWRP atm
it says "could not find ´META-INF/com/google/android/update-binary´in zip file.
Any bright ideas ?

Citroon said:
i cannot install anything in TWRP atm
it says "could not find ´META-INF/com/google/android/update-binary´in zip file.
Any bright ideas ?
Click to expand...
Click to collapse
It looks so simply but did you take a look to your rom zip? open with a zip explorer like winzip in /META-INF/com/google/android and here you must find this file

SubwayChamp said:
It looks so simply but did you take a look to your rom zip? open with a zip explorer like winzip in /META-INF/com/google/android and here you must find this file
Click to expand...
Click to collapse
it's not only with the roms, it's with everything
i've tried to flash new firmware, gapps and nothing works :/

well, what version of twrp do you use? try first with oficcial 3.0.2.0, bootloader unlocked? check usb debbugging and allow oem unlock in developer options, sometimes neccessary mount system or enable MTP in recovery

SubwayChamp said:
well, what version of twrp do you use? try first with oficcial 3.0.2.0, bootloader unlocked? check usb debbugging and allow oem unlock in developer options, sometimes neccessary mount system or enable MTP in recovery
Click to expand...
Click to collapse
im using the official 3.0.2.0, i currenly have no RoM installed so i can't boot into anything

Citroon said:
im using the official 3.0.2.0, i currenly have no RoM installed so i can't boot into anything
Click to expand...
Click to collapse
try first formatting data, wipe everything except where placed your rom zip (int or extSD), mount system and flash again

SubwayChamp said:
try first formatting data, wipe everything except where placed your rom zip (int or extSD), mount system and flash again
Click to expand...
Click to collapse
Tried that, still having the error:crying:

Citroon said:
i cannot install anything in TWRP atm
it says "could not find ´META-INF/com/google/android/update-binary´in zip file.
Any bright ideas ?
Click to expand...
Click to collapse
ok, go to format the data and then write YES, but u will lose your data, so, backup your files, and then restore them. should be working !!

StonebridgeGr said:
ok, go to format the data and then write YES, but u will lose your data, so, backup your files, and then restore them. should be working !!
Click to expand...
Click to collapse
Doesn't work either, this is really weird to me, i've been flashing for a few years now, and never encountered this issue before.
-also note that i'm not amazing at this

Citroon said:
Doesn't work either, this is really weird to me, i've been flashing for a few years now, and never encountered this issue before.
-also note that i'm not amazing at this
Click to expand...
Click to collapse
ok. which image did u flash? which guide did u followed to flash twrp ? ( because a newiest image of TWRP RECOVERY for mi max is up )

StonebridgeGr said:
ok. which image did u flash? which guide did u followed to flash twrp ? ( because a newiest image of TWRP RECOVERY for mi max is up )
Click to expand...
Click to collapse
i've tried about every RoM available.
I also want to note that i have flashed with this version of TWRP before (3.0.2.0)

StonebridgeGr said:
ok. which image did u flash? which guide did u followed to flash twrp ? ( because a newiest image of TWRP RECOVERY for mi max is up )
Click to expand...
Click to collapse
tried about every rom available, and other things just to see what would work and what wouldn't (nothing can flash)
im currently running 3.0.2.0 and have flashed with this version of TWRP before, but suddenly it stopped working

Citroon said:
Tried that, still having the error:crying:
Click to expand...
Click to collapse
Probably a bad flashing and you are needing repari partitions, for that I recommend start from beginning again:
- flash miui rom for fastboot (unpack zip rom in your adb folder for better performance, connect device to pc into mode fastboot, be sure device be recogniced typing; fastboot devices then right click mouse and execute like admin over "flash all".
- then to install rom you can flash again twrp via fastboot typing any place adb folder and placing file recovery.img this folder; fastboot flash recovery recovery.img
- then go to recovery with hardware keys and flash supersu v.2.79

SubwayChamp said:
Probably a bad flashing and you are needing repari partitions, for that I recommend start from beginning again:
- flash miui rom for fastboot (unpack zip rom in your adb folder for better performance, connect device to pc into mode fastboot, be sure device be recogniced typing; fastboot devices then right click mouse and execute like admin over "flash all".
- then to install rom you can flash again twrp via fastboot typing any place adb folder and placing file recovery.img this folder; fastboot flash recovery recovery.img
- then go to recovery with hardware keys and flash supersu v.2.79
Click to expand...
Click to collapse
oh boy, i guess im screwed for now then.
i only have access to a macbook for the next few days, tried installing fastboot on it but that's a complete nightmare

Citroon said:
oh boy, i guess im screwed for now then.
i only have access to a macbook for the next few days, tried installing fastboot on it but that's a complete nightmare
Click to expand...
Click to collapse
two things; I assume that trying to flash from extSD, if yes with file explorer of recovery copy to internal memory, maybe an issue to reading extSD, also you can to install a newer version of recovery 3.0.3.2 works sometimes for me and last here you have a reading page about install fastboot on mac (nightmare) http://www.stechguide.com/setup-adb-and-fastboot-on-mac-easy-step-by-step-guide/

SubwayChamp said:
two things; I assume that trying to flash from extSD, if yes with file explorer of recovery copy to internal memory, maybe an issue to reading extSD, also you can to install a newer version of recovery 3.0.3.2 works sometimes for me and last here you have a reading page about install fastboot on mac (nightmare) http://www.stechguide.com/setup-adb-and-fastboot-on-mac-easy-step-by-step-guide/
Click to expand...
Click to collapse
I finally got it working
I was so stubborn that I decided to install Windows Bootcamp on my mac
it was as simple as reinstalling TWRP and do a clean wipe, now i can install roms and all the other things as i please again.
-Thank you for your help!

brick?

Hi
My chiron is on fastboot mode,i cant turn off
Not run in system
I can enter on TWRP only ADB
What can i do?
Thanx

You say you can get into TWRP, right?
1. Boot into TWRP
2. Wipe > Format Data
3. Transfer a compatible ROM to your phone
4. Flash ROM
5. Flash Google Apps and Root if you want
6. Boot into system

Krystlie said:
You say you can get into TWRP, right?
1. Boot into TWRP
2. Wipe > Format Data
3. Transfer a compatible ROM to your phone
4. Flash ROM
5. Flash Google Apps and Root if you want
6. Boot into system
Click to expand...
Click to collapse
The only way to enter on TWRP its via ADB,with the buttons i go to small mimix2 recovery with 3 opcions

Ok
Now im on TWRP but i cant see my files

stani2103 said:
Ok
Now im on TWRP but i cant see my files
Click to expand...
Click to collapse
For me when I plug in my phone to my computer while in TWRP I can still drag and drop the files over. You should be able to see your device in Windows. Since you can use adb try doing
Code:
adb push <source file location> <target location>
replace the <source file location> with the file location. That should move the file over to the phone. Then you can flash the ROM and get into the system.
Edit: When you click the Install button can you not find the files? The ROM you are flashing should be in a zip file.

Hi
My TWRP (by IceMan) not workproperly....so,after change it i flash .eu ROM via sideload......but still with this problem....my internal storage its a lot of madness
***TAPATALKING***

Solved
***TAPATALKING***

stani2103 said:
Solved
***TAPATALKING***
Click to expand...
Click to collapse
How to solved ?

wching02 said:
How to solved ?
Click to expand...
Click to collapse
Clean flash Global ROM and now working fine
***TAPATALKING***

Question Cannot flash TWRP from Fastboot, TWRP reboot shows Slot A/B, dont know what to do

Ive already flashed a few phones, but this is the first time that Ive got CMD error "FAILED (remote: (recovery_a) No such partition)". So I booted twrp.img, falshed ArrowOS and TWRP from within TWRP and it said something about Slot A and B, which I dont understand ... some guide also said to Format Data, which I did, and then I just could boot into TWRP in Slot A, and no OS on Slot B, which rebooted me into Slot A. I couldnt find any info about this and I dont know what to do. Anybody knows how to properly flash TWRP and custom ROMs please ?

Start fresh by flashing stock MIUI rom through fastboot and proceed from there
1 Boot once into MIUI and reboot into fastboot
2 fastboot boot twrp.img (from platform tools folder)
3 Flash custom rom like ArrowsOS with inject twrp option checked
4 Reboot recovery
5 Format Data by typing "yes"
6 Reboot to system
7 Done

Follow the TWRP install instructions by fastboot boot TWRP.img
advanced, install TWRP
It should then reboot and TWRP will be installed
Then proceed as above by flashing a ROM e.g ArrowOS with TWRP inject.
Then reboot TWRP and wipe data

Use "fastboot boot TWRP.img" to temporarily boot TWRP.
You can install TWRP by using "Install to Ramdisk" inside TWRP and selecting TWRP.img

Cvenda said:
Ive already flashed a few phones, but this is the first time that Ive got CMD error "FAILED (remote: (recovery_a) No such partition)". So I booted twrp.img, falshed ArrowOS and TWRP from within TWRP and it said something about Slot A and B, which I dont understand ... some guide also said to Format Data, which I did, and then I just could boot into TWRP in Slot A, and no OS on Slot B, which rebooted me into Slot A. I couldnt find any info about this and I dont know what to do. Anybody knows how to properly flash TWRP and custom ROMs please ?
Click to expand...
Click to collapse
Did you manage to fix it? I got into the same problem, I could only fix it downloading the most updated version of adb/fastboot. I don't remember where I downloaded it, but it was what solved this problem for me.

pedrowood said:
Did you manage to fix it? I got into the same problem, I could only fix it downloading the most updated version of adb/fastboot. I don't remember where I downloaded it, but it was what solved this problem for me.
Click to expand...
Click to collapse
well Iam still confused about that Slot A/B thing, but since Ive probably bricked my phone, I flashed the fastboot ROM through MiFlasher and I havent tried flashing TWRP or custom ROM since, there are some things I really like about MIUI so Iam gonna see which ROM Iam gonna choose in the future

Cvenda said:
well Iam still confused about that Slot A/B thing, but since Ive probably bricked my phone, I flashed the fastboot ROM through MiFlasher and I havent tried flashing TWRP or custom ROM since, there are some things I really like about MIUI so Iam gonna see which ROM Iam gonna choose in the future
Click to expand...
Click to collapse
Slot A and B refer to Project Treble, where there are 2 separate partitions. 1 for OEM like Samsung and other for core Android OS. That way Google can update the OS partition with security updates without having to wait for Samsung to implement those security update into their version of Android, as was the case before Galaxy S9. Needless to say, this way security updates get pushed out way faster, because there is no need to wait an entire year (I'm looking at you Samsung) for OEM to finally implement it. Hope this clears things up for you.

Milan-XDA said:
Slot A and B refer to Project Treble, where there are 2 separate partitions. 1 for OEM like Samsung and other for core Android OS. That way Google can update the OS partition with security updates without having to wait for Samsung to implement those security update into their version of Android, as was the case before Galaxy S9. Needless to say, this way security updates get pushed out way faster, because there is no need to wait an entire year (I'm looking at you Samsung) for OEM to finally implement it. Hope this clears things up for you.
Click to expand...
Click to collapse
reason for slots

Robert314 said:
Follow the TWRP install instructions by fastboot boot TWRP.img
advanced, install TWRP
It should then reboot and TWRP will be installed
Then proceed as above by flashing a ROM e.g ArrowOS with TWRP inject.
Then reboot TWRP and wipe data
Click to expand...
Click to collapse
there is a slight problem with this ... I cannot upload any file to the phone, because I have wiped Data, so there is no folder that I can access from the PC, so I can only sideload .zip files, and most of the .zip files just doesnt work for some reason, only ArrowOS, but not the PixelExtended, nor CrDroid ... I cannot even sideload TWRP.img to install it into ramdisk
EDIT: after sideloading ArrowOS and booting TWRP using "fastboot boot twrp.img", I can access internal storage, so I uploaded twrp.img into /sdcard/Download folder, installed it into ramdisk, rebooted to Recovery and now successfully flashing CrDroid ROM that I uploaded to /sdcard/Download

Cvenda said:
there is a slight problem with this ... I cannot upload any file to the phone, because I have wiped Data, so there is no folder that I can access from the PC, so I can only sideload .zip files, and most of the .zip files just doesnt work for some reason, only ArrowOS, but not the PixelExtended, nor CrDroid ... I cannot even sideload TWRP.img to install it into ramdisk
Click to expand...
Click to collapse
You can adb transfer files in TWRP. You could also use a USB stick connected via OTG cable

Robert314 said:
You can adb transfer files in TWRP. You could also use a USB stick connected via OTG cable
Click to expand...
Click to collapse
its behaving so randomly ... I often get error kInstallDeviceOpenError, even tho I successfully installed that ROM at least one time ... I dont know which slot (A/B) to use and when ... now I have ArrowOS in slot A and CrDroid ins lot B, and I cannot flash anything from booted TWRP.img ... Iam gonna try to install TWRP into ramdisk again from USB OTG

Cvenda said:
its behaving so randomly ... I often get error kInstallDeviceOpenError, even tho I successfully installed that ROM at least one time ... I dont know which slot (A/B) to use and when ... now I have ArrowOS in slot A and CrDroid ins lot B, and I cannot flash anything from booted TWRP.img ... Iam gonna try to install TWRP into ramdisk again from USB OTG
Click to expand...
Click to collapse
In order to wipe the super partition (both A/B and data) flash Xiaomi.eu and then wipe data

Robert314 said:
In order to wipe the super partition (both A/B and data) flash Xiaomi.eu and then wipe data
Click to expand...
Click to collapse
how exactly should I proceed ? flash fastboot stock ROM with MiFlasher, boot into bootloader, boot twrp.img, wipe data, and then what ? which slot do I choose ? should I install TWRP into ramdisk, reboot into recovery and then flash custom ROM ?

Cvenda said:
how exactly should I proceed ? flash fastboot stock ROM with MiFlasher, boot into bootloader, boot twrp.img, wipe data, and then what ? which slot do I choose ? should I install TWRP into ramdisk, reboot into recovery and then flash custom ROM ?
Click to expand...
Click to collapse
ROM: xiaomifirmwareupdater.com/archive/miui/alioth/
Mi Flash: xiaomiflashtool.com
ADB & Fastboot: developer.android.com/studio/releases/platform-tools
TWRP: https://forum.xda-developers.com/f/xiaomi-poco-f3-xiaomi-mi-11x-redmi-k40.12161/?prefix_id=33
Clean Install of Xiaomi.eu ROM:
Flash Stock ROM with Mi Flash
Boot System once (to create /data)
Boot TWRP from Nebrassy or @Vasishoth
Flash Xiaomi.eu ROM
Format Data & Dalvik Cache

dreamytom said:
ROM: xiaomifirmwareupdater.com/archive/miui/alioth/
Mi Flash: xiaomiflashtool.com
ADB & Fastboot: developer.android.com/studio/releases/platform-tools
TWRP: https://forum.xda-developers.com/f/xiaomi-poco-f3-xiaomi-mi-11x-redmi-k40.12161/?prefix_id=33
Clean Install of Xiaomi.eu ROM:
Flash Stock ROM with Mi Flash
Boot System once (to create /data)
Boot TWRP from Nebrassy or @Vasishoth
Flash Xiaomi.eu ROM
Format Data & Dalvik Cache
Click to expand...
Click to collapse
in case of flashing custom ROM, are the steps same ? just instead of Xiaomi.eu ROM I flash PE, or CrDroid ? and should I format data and dalvik also or wipe data (that option where I need to type YES) ? Ive found official guide for flashing CrDroid, but Iam stuck st booting animation for 30 minutes

Cvenda said:
in case of flashing custom ROM, are the steps same ? just instead of Xiaomi.eu ROM I flash PE, or CrDroid ? and should I format data and dalvik also or wipe data (that option where I need to type YES) ? Ive found official guide for flashing CrDroid, but Iam stuck st booting animation for 30 minutes
Click to expand...
Click to collapse
Go into TWRP and press wipe then format data (type yes).

regedit12345 said:
Go into TWRP and press wipe then format data (type yes).
Click to expand...
Click to collapse
I have stock rom in slot A (bootable and working) and custom rom in slot B (stuck at booting animation), and I should format data while being in slot A right ?

Cvenda said:
I have stock rom in slot A (bootable and working) and custom rom in slot B (stuck at booting animation), and I should format data while being in slot A right ?
Click to expand...
Click to collapse
Doesn't matter. Just select format data > yes > reboot to system

regedit12345 said:
Doesn't matter. Just select format data > yes > reboot to system
Click to expand...
Click to collapse
sooo what seemes to work for me now is, that I formated data, then flashed PE ROM from OTG and booted into it without any problems

Question MI 12X system partition Corrupted/deleted Need Urgent Help Please. ??

my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.

ajoy25 said:
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
Click to expand...
Click to collapse
Check here that everything has been done correctly
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/

ajoy25 said:
my 12X system storage Corrupted/deleted after installing TWRP, I'm New A/B partition system. now I can't access the storage even flashing with MI Flash tool not work. PLz plz someone expert help me out. how to resolve it ? will be so grateful.
Click to expand...
Click to collapse
How did you install twrp? Did you flash the twrp to boot partition? If yes, you need to find out which system you had installed and then flash the suiting boot.img.
Background: In A/B partition scheme, recovery is part of boot.img. Boot.img needs to be patched by twrp. So normally you need to boot twrp by typing "fastboot boot twrp.img" and then, when twrp is booted, go to advanced and press "flash current twrp"

Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.

Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.

ajoy25 said:
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Click to expand...
Click to collapse
Ok, you already deleted data. Try to format data via fastboot. Use "fastboot -w" and retry!

ajoy25 said:
Thank you for ur kind reply, I have flashed the TWRP as u said & its OK..I'm heaving problem with Flashing EU Rom after deleting data I flashed the rom but it's stuck in the boothloop then entering TWRP showing SD memory "0"..plz tell me the process of flashing rom & Magisk. Thanks again.
Click to expand...
Click to collapse
Maybe start one thing at a time.
Problem with twrp
Try flashing this Fastboot rom
Download the rom/extract it/open the folder /use first install.bat with the phone in Fastboot mode
https://sourceforge.net/projects/xi...13.0.5.0.SLDCNXM_v13-12-fastboot.zip/download
then install the TWRP and update the rom via OTA (do not put any security on the lock screen).
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img​
then in Twrp go to Advanced -> flash current TWRP->reboot TWRP
If that doesn't work/see post https://forum.xda-developers.com/t/...need-urgent-help-please.4491461/post-87424405

NOSS8 said:
Maybe start one thing at a time.
Problem with twrp
Try flashing this Fastboot rom
Download the rom/extract it/open the folder /use first install.bat with the phone in Fastboot mode
https://sourceforge.net/projects/xi...13.0.5.0.SLDCNXM_v13-12-fastboot.zip/download
then install the TWRP and update the rom via OTA (do not put any security on the lock screen).
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img​
then in Twrp go to Advanced -> flash current TWRP->reboot TWRP
If that doesn't work/see post https://forum.xda-developers.com/t/...need-urgent-help-please.4491461/post-87424405
Click to expand...
Click to collapse
Thank you for ur kind support. I have managed to flash it with mi flasher & rooted it with masgisk.