I went ahead and purchased the clingo car mount
http://www.clingo.com/car-mounts/universal-hands-free-mount/
for $25 shipped off of eBay (find it yourself) after it was mentioned by a member on XDA. It looked cool to me and since I didn't enjoy my Soundgate M2 mount to much I decided to give it a try.
I must say that I am very happy with the purchase. It works flawlessly with my EVO. I have tried it with two different cased, one was a regular tpu style and then with this case http://www.amazon.com/High-Quality-...?ie=UTF8&s=electronics&qid=1281911569&sr=8-1\
I'm not sure what material its made from but it is comparable to leather.
Both cases worked perfectly. They stuck to the Clingo adhesive without any problems and most importantly, they stayed there. A naked EVO will work just as well.
I have had the mount only for a couple days, but so far I have driven relatively long distances without no issues whats-so-ever. I live in houston tx btw, it's 5:35 rite now and 97* degrees outside, just to give you an idea of my environment.
The adhesive on the clingo does not seem to be losing its stickiness at all after my first couple days. I found this on clingos website.
http://www.clingo.com/articles/technology
If those are true facts then you can expect this baby to last a while...
Installation was extremely easy. I have mine attached to my windshield and it sticks to it like a champ. There is an optional attachment that allows you to stick it to your car dash board which works very well also.
overall I HIGHLY recommend this product if your looking for a decent car mount and in all honestly if I was to buy a home dock for the EVO I would get another clingo. It's so simple yet practical.
I know with all these knew docks coming out from htc/sprint/eBay/wireforless nobody really considered getting a Clingo product, but you can find them for relatively cheap off of eBay and it seems like it would look nice in an office/home environment. talking about this btw http://www.clingo.com/home-and-office/universal-podium
this seems pretty neat also, might scoop it up once I get some extra cash.
http://www.clingo.com/home-and-office/parabolic-sound-sphere
I dont see a need to spend 50+ on a dock just because it charges your phone. You can get a couple spare batteries, a car charger, home charger, usb cable and screen protectors for under 20 off of eBay. That matched with a Clingo product is all I need.
P.S - I suck at writing reviews. This is just my attempt to help some fellow xda members make a decision on an accessory for there phone. If your coming here to hate on my grammar and the way I type (which i have seen A LOT of lately on XDA. Must be the summer heat or something) then troll on my friend.
Oh yeah! and if you guys want a video of the mount just let me know. Only problem is my EVO is my video recorder, but I can still go ahead and try it if ya'll want.
Thanks for the review! I was actually just on their website before I came across your post. (Its actually still open in another window lol.) Can you comment on the amount of weight it can support based on its area? I know some of the pads for the phone were pretty big, but other were smaller circles. Do you think the smaller ones would be able to support our Evos?
"It’s pretty simple, really. Clingo holds your phone. It doesn’t matter if it is a BlackBerry, iPhone, Droid, Samsung, or whatever. Whether in your car, at the office, at home, or wherever - Clingo holds it."
That's a statement from the clingo website. That is for all there products except for the little necklaces which are designed specifically for iPod nanos. So according to them any of there products should be able to support any mobile device, including our EVOs.
From my experience, which is still limited, it really doesn't seem like too much surface area is necessary to grip the phone. Also, all the "Universal Products" seem to have the same surface area and shape. They only have two products that I can see with smaller surface area. One is the nano necklace and the other is the parabolic sounds sphere....
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.
starplaya93 said:
However, I remember somebody posting something about there evos slipping a little bit while using the clingo car mount and an innocase. Not sure how accurate that is though.
Click to expand...
Click to collapse
He stated the arm came down a bit, the phone itself stayed put on the holder, but the entire assembly (ball joint) rotated down a bit.
ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.
starplaya93 said:
ahh...well in his case all he had to do was adjust the knob and tighten it, which is easily done.
Thanks for clarifying that.
Click to expand...
Click to collapse
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.
I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount
hx3 said:
I believe you guys are referring to my post here: http://forum.xda-developers.com/showpost.php?p=7667216&postcount=22
When using the mount with my Evo and Innocase Active Limited Edition, problems arose between the pad and the ball joint at the end of the arm (where you can adjust the pads' viewing angle). The arm wasn't moving at all since it was as tight as I could get it to be. While driving, the added weight of the case was causing the pad to move downward. It felt like it was much easier to move the pad around the ball joint when the case was in use. I tried every which way to get the phone to sit still but it continuously moved down, to the point where I couldn't view the screen very well at all.
It doesn't really bother me, though, since the mount works perfectly on a naked Evo. Once I removed the case, the pad was not moving whatsoever and the connection between it and the jointed ball seemed much stiffer.
Click to expand...
Click to collapse
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?
dmc971989 said:
I just ordered the parabolic sound sphere... gonna play around with that before i pull the trigger on a car mount
Click to expand...
Click to collapse
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.
starplaya93 said:
ohh, ok...maybe the innocase just adds a little to much weight for it to manage.... Have you tried cleaning the Clingo and trying it again?
Click to expand...
Click to collapse
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.
starplaya93 said:
Let me know how that goes. I'm considering buying it, but I want to know if it actually amplifies sound at all be I go for it.
Click to expand...
Click to collapse
Oh I have absolutely no doubt that it will amplify sound, im just not sure how much louder it will make things... or if its going to have any strange/****ty frequency response
hx3 said:
Yeah, several times. My problem isn't with the stickiness from the green area of the pad, it's with the back where it connects to the ball joint. With or without the case, the phone doesn't slide or fall off the sticky part of the pad at all. But when I use the case, the pads' construction moves down as if it's sliding from the ball joint due to too much weight.
Kind of hard to explain clearly. The phone sticks to the pad perfectly in any scenario, though. I just think the Evo + Innocase Active is too heavy for this mount unless some slight modding is done. Nevertheless, I'm content with using the phone with no case when used with the mount. Works just fine then.
Click to expand...
Click to collapse
In other words it goes from this | to this /
Take a black zip tie, wrap it around the back where the ball goes into the socket and cinch it down some, may be just what you need to add that bit of extra grip.
Great review.. I have the car dock, the tethering pad and the sound sphere on the way.. should be here today.
Well, all my stuff showed up. The parabolic sphere is pretty cool. It does increase the volume somewhat and maybe add a little reverb to the noise. The tethering pad is okay as well.
The car dock, however, sucks. It would probably be great on a lighter phone. So far my Evo has fallen off 3 times and seems to slide around on the pad. Pretty disappointing.. looks like my quest for a good car dock will continue.
Well, Ive done everything I could do to make the car mount work and it just wont. The design is poor and it reflects in the performance of the dock. My dock will not stay where I put it, instead sagging down and eventually dropping the phone. Ive tried everything short of wire tieing it in place (Yay for ghetto engineering) and I cant make it stay. Ive tried zip tie around the neck of the mount, stuffing tape into the ball and socket, etc.. nothing helps. Guess this one is going to end up in the trash pile too along with every other Evo mount Ive bought.
If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.
VW91N3 said:
If you'd point out the failing was in the positioning of the mount, and not the mount's ability to hold the phone on its sticky pad, you might have a good chance of selling it here for not much less than you paid for it.
Click to expand...
Click to collapse
Well, its not just that. The Evo IMO doesnt stick to the pad very well. Maybe its the oil from my hands but I had to put a plastic case on the phone just to get it to stick. For a Nexus one or something, it probably would be great. The Evo is just too much of a beast for this mount.
On a side note, I emailed Clingo about calling me regarding this mount. Its been 2 days and no call back. Another strike against Clingo.
The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson
bhtoque said:
The rattle and shake of my universal gooseneck holder has been driving me crazy since day one, and I've been looking for another option. After watching the clingo demo video with the guy flying over speed bumps I decided to give it a try.
I've been using it in my car for a week now, and am very happy with it. Right out of the box it held my EVO (in the innocase active) no matter how hard I shook it. The grip of the pad is amazing.
As others reported, the size/weight of the EVO caused it to droop forward. If I turned the pad sideways it stayed up better, but a small black zip tie around the socket completely fixed the drooping. I figure putting a small piece of rubber band into the socket should also do the trick while still allowing repositioning.
The result has been stunning. Even over big potholes and grooved highway pavement the clingo has kept my phone still. It is soooo much easier to read without the phone shaking.
Now to see how the cling pad holds up to new england winter.
JAson
Click to expand...
Click to collapse
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.
starplaya93 said:
great to here its worked out well for you. I've had mine for a while and am still loving it, however, i'd like to try out the rubberband trick that you are speaking of... What exactly did you do? How big was the rubber band?
Mines has held up to texas weather 100+ with my car out in the heat, so hopefully it can handle the cold also.
Click to expand...
Click to collapse
I have not used the rubber band trick on my Clingo, as the zip tie stopped the droop, but I've done it with similar ball joints. You should be able to find a small bag of rubber bands at your local office supply big box. One about 1/4" wide should do with the clingo. Just cut a piece out of the band and put it into the socket as close to on-center as you can. Line up the ball on the clingo's arm so that the mount pad will be close to the angle you want it, and snap the pieces back together. The rubber will provide grip, and provide enough to stop any drooping while still allowing you to reposition and swivel the mount head.
JAson
Hi, just wanted to give a quick impression of 2 windshield mounts I ordered.
http://www.amazon.com/Arkon-Univers..._1_3?s=wireless&ie=UTF8&qid=1305654075&sr=1-3
http://www.amazon.com/Arkon-IPM515-...Holder-Compatible/dp/B003Z4L68S/ref=pd_cp_e_2
Overall they both work OK. I much prefer the "Universal Mount" just because of how the Slim Grip opens/closes. The Universal is a squeeze style close with a button release. The Slim Grip you have to push the lower part down to open it, and the same to get your phone out. Kind of a pain.
Plus, even though the Slim Grip seems to be OK in Landscape...it still scares me not having a physical piece there to hold it up in case the spring force isnt enough.
I am using the Slim Grip as a vent mount (using the vent mount supplied with the Universal) and the Universal as a Windshield mount. So far the suction cup on the Universal seems very strong and I have not worried about it coming down.
One thing I noticed on the Universal that is a bit annoying, when the unit is fully opened and you are driving it rattles. This is remedied by simply closing it 1 or 2 clicks (which still allows you to put your phone into it without opening it back up).
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Ordered the Universal yesterday, should have it tomorrow. I'm curious to see how well it works with the extended battery, but I like the idea of mounting it to the vent. Can't wait to get it regardless though, since the other one I have will only work with the stock battery.. Grrr..
I had a mount similar to the universal mount here (different brand) that I grew to loathe quite a bit because it rattled with no device in it. I didn't put my phone in it every time I got in the car and this bothered me greatly. I'm glad I avoided that universal mount because I would not tolerate that at this point.
The second mount (that you have to push down on the lower part to insert device) is the one I use now. It doesn't bother me how it functions and it is quiet. It grips well enough that you shouldn't worry about it slipping, and the extended clips make it work great for this phone without needing a huge stretch on the cradle to insert the phone.
I got the universal mount yesterday. Love it so far. Haven't noticed any rattling, but I may not either unless I switch vehicles. Keeps the phone secure though, and it works nicely with the extended battery in place (no case yet).
I do kinda like the looks of that other one too. Maybe I might order it for the wife and try it out. Not sure how often she'd use something like that though...
frankspin said:
I have the same Universal mount but with the frictionless pad. How do you like the Vent mount though in the terms of removing it? I got scared away from it because the reviews had that the two clips to hold it in place easily break.
Click to expand...
Click to collapse
Hi, I do not have much experience with this yet as this mount is in my wife's car.
The vent mount clips do seem a bit flimsy...especially since I am using it on the "slim" mount. With the universal I wouldnt worry too much because of the button release, squeeze in. You arent putting much if any pressure on the clips.
But with the slim mount...I have a feeling these could break on me down the road.
Those clips are definitely flimsy. Solved the problem though: rather than use the clips, I pulled that other piece off and cable tied it to my vent. Solid, and not moving.
Obviously, it does no good if you switch vehicles, but for that I will use windshield mount then.
Sent from my ADR6350 using XDA App
Just wanted to update on my "hack" for the vent mount. Been very solid so far. I have some concern over the longevity of the cable ties, but honestly, it's a very minor concern. Very little movement of the phone, great location being on the air vent (especially in the summertime, keeps it cool).
I can post pics if anyone wants to see, but I'm glad I went that route. Leaves the windshield mount available for when I'm in a company vehicle or my wifes car.
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
jesand83 said:
Do any of these after-market mounts activate the car panel app? I've seen how you can find and run it through the HTC universal search but is there any other way to activate it (like with a magnet on the OG Droid)?
Click to expand...
Click to collapse
Not with a magnet. My gut is that a resistor or something is what's required. Check this thread:
http://androidforums.com/htc-droid-incredible-2/350066-there-anyway-trick-dinc2-into-car-mode.html
Hi folks,
I was curious if anyone has any personal experience with using the Note on a treadmill, I've seen many mounts and holders but haven't run across any personal accounts of people using this specific tablet and what mount they used.
I'd appreciate any feedback.
Thanks
droidtinkerer said:
Hi folks,
I was curious if anyone has any personal experience with using the Note on a treadmill, I've seen many mounts and holders but haven't run across any personal accounts of people using this specific tablet and what mount they used.
I'd appreciate any feedback.
Thanks
Click to expand...
Click to collapse
Dont have treadmill and cant answer that. Maybe these are interesting and there are different length of the gooseneck and "mount" can change to fit larger tablets up to 14" (have to buy separat, if can find it) (http://www.aliexpress.com/item/Adju...d-for-3-5-14-Tablet-PC-GPS-360/930111360.html)
http://www.youtube.com/watch?v=LrroDdQR3ck
http://www.ebay.com/sch/Mounts-Stan...html?_from=R40&_nkw=tablet+stand+mount+holder
http://www.amazon.com/dp/B0097WP26Y/ref=cm_sw_su_dp
My treadmill (Landice L7) has a shelf on which I rest the tablet. Works great, no shaking
I bought this thing to use my tablet to watch Netflix while using my Elliptical: (search item 310803776087 on ebay as I am prohibited from posting outside links since I don't have enough posts).
It attached fine to my elliptical with the L clamp. Measure your treadmill to how thick the surface the clamp will attach to is, make sure the clamp is wide enough as some mounts like these have small clamps.
I had to take the arm apart and flip it around since I wanted the arm to bend in the opposite direction. There was a little shaking but for watching videos it was no problem, I would not want to read on it though due to the shaking. I would often tighten up the ball point on the back since the tablet would often droop down some due to the weight of the tablet and vibration of the machine, eventually I managed to break the holder off that ball joint since it was all plastic. It was useless after that and I tossed it in the garbage.
So if I were to get a new one, I'd probably opt for an all metal one. Also I'd try out those gooseneck ones with flexible hoses like the one linked above rather than arms like I got since the gooseneck will be easier to position and have more position options. I'm not sure though if the flexible arm will as secure as the tightenable arms of the one I bought, maybe the flexible arm will slowly droop due to the weight of the tablet and vibration? The only good thing about the one I bought was the arm didn't really move, it was only the ball joint. You'd need a stiff gooseneck arm if it's going to be used with an exercise machine. Lemme know what you end up getting, I might go with the same if it's good.
droidtinkerer said:
Hi folks,
I was curious if anyone has any personal experience with using the Note on a treadmill, I've seen many mounts and holders but haven't run across any personal accounts of people using this specific tablet and what mount they used.
I'd appreciate any feedback.
Thanks
Click to expand...
Click to collapse
I have both a treadmill (older Nordictrac) and elliptical (sole e55) and both have an edge that perfectly holds my tablet. I flip my moko case to the back, and it sits in that spot very securely. That is, if I don't yank on the headphones too hard. Perfect to watch while working out...
Hi all,
just e tip: a dedicated carholder for this phone is ahrd to find and a little expensive if i'm honest.
if you search for a dedicated carholder form LG G2 on Ebay or such, this will do just aswell. mind you, with a little creative puzzling.
the size between these phones is comparable....not EXACTLY the same.
i've taken a light and heated the corners and the 'clipping and unclipping thingy' without the phone in it one by one.
After heating, fitted the phone in and pressen on the each corner-part and pushed the holder around it.
It fits pretty good and will not snap out easliy.
be careful after applying a heat source......ths plastic can be VERY HOT. insert phone and press it onto a surface.
no promises on the result ofocurse.....just thought i'd share it........
I just wanted to add that I went a different direction with this, and it works great.
I bought a http://www.amazon.com/SUPCASE-Samsung-Galaxy-Active-Unicorn/dp/B00DY2SEFE
Then I bought the quadlock mounts
The adapter for the phone
http://www.quadlockcase.com/products/universal-adapter
then bought the bike mount
http://www.quadlockcase.com/products/quad-lock-bar-mount-pro
and car mount
http://www.quadlockcase.com/products/quad-lock-car-mount
I attached the universal adapter to the back of my phone (easy easy compared to the otterbox stuff out there, since unicorn beatle case is uniformly flat already, it is why i chose it)
Now i attach it to my bike/car when I need to, and it doesnt make it too much bulkier. I actually have 2 cases, one with and one without the adapter, and I switch them out if I am going to go biking, or on a long trip where I might use the GPS.
there are really stable BikeMounts from Upmove:
http://www.upmove.eu/samsung-galaxy-s4-active-fahrradhalterungen/705j43k34u55.html