[ STOCK FULL DUMP ] LGM-V300S - SW Version : 10j - LG V30 ROMs, Kernels, Recoveries, & Other Developm

[ STOCK FULL DUMP ] LGM-V300S - SW Version : 10j - LG V30 ROMs, Kernels, Recoveries, & Other Developm

Hey guys,
here above a STOCK FULL DUMP of All partitions i have just created having my LGM-V300S - SW Version : 10j in hand ...
LINK
We can use for development and to try to find some valid Exploit...

Thanks a lot!
A quick inspection notes the following:
CAF tag: LA.UM.5.8.r1-02200-8x98.0-1 = refs/tags/AU_LINUX_ANDROID_LA.UM.5.8.R1.07.01.02.290.022
Board codename: joan
Unlike previous variants, it is NOT using a dtb.img but instead the standard Image.gz-dtb format (gzip -9 < Image > Image.gz && cat Image.gz *.dtb > Image.gz-dtb)
Standard gzip+cpio ramdisk
Code:
[email protected]:~/Downloads/lg-v300s-v10j/LGMV300SAT-00-V10j-SKT-KR-SEP-16-2017-64G+0$ bootimg vv boot_4.img
BOARD_MAGIC ""
BOARD_CMDLINE "console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true androidboot.usbcontroller=a800000.dwc3 androidboot.hardware=joan buildvariant=user"
BOARD_PAGESIZE 4096
BOARD_BASE 0x00000000
BOARD_KERNEL_OFFSET 0x00008000
BOARD_RAMDISK_OFFSET 0x02000000
BOARD_SECOND_OFFSET 0x00F00000
BOARD_TAGS_OFFSET 0x00000100
BOARD_KERNEL_SIZE 19069782
BOARD_RAMDISK_SIZE 7370445
BOARD_SECOND_SIZE 0
BOARD_DT_SIZE 0
BOARD_HASH 0xefa953a47d291ccf70d7eba9f3bb5c12da03e8ff
[email protected]:~/Downloads/lg-v300s-v10j/LGMV300SAT-00-V10j-SKT-KR-SEP-16-2017-64G+0$ bootimg vv recovery_4.img
BOARD_MAGIC ""
BOARD_CMDLINE "console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true androidboot.usbcontroller=a800000.dwc3 androidboot.hardware=joan buildvariant=user"
BOARD_PAGESIZE 4096
BOARD_BASE 0x00000000
BOARD_KERNEL_OFFSET 0x00008000
BOARD_RAMDISK_OFFSET 0x02000000
BOARD_SECOND_OFFSET 0x00F00000
BOARD_TAGS_OFFSET 0x00000100
BOARD_KERNEL_SIZE 19069782
BOARD_RAMDISK_SIZE 13043351
BOARD_SECOND_SIZE 0
BOARD_DT_SIZE 0
BOARD_HASH 0x7be0d1797b9ebf10a3afa49bac79973b148f0078
fstab.joan:
Code:
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/bootdevice/by-name/system /system ext4 ro,barrier=1,noatime wait,verify
/dev/block/bootdevice/by-name/cache /cache ext4 discard,nosuid,nodev,barrier=1,noatime,noauto_da_alloc,errors=continue wait,check
/dev/block/bootdevice/by-name/userdata /data ext4 discard,nosuid,nodev,barrier=1,noatime,noauto_da_alloc,errors=continue wait,check,forceencrypt=/dev/block/bootdevice/by-name/encrypt
/devices/soc/c0a4900.sdhci/mmc_host* auto auto nosuid,nodev wait,encryptable=/dev/block/bootdevice/by-name/encrypt,voldmanaged=external_SD:auto
/devices/soc/a800000.ssusb/a800000.dwc3/xhci-hcd.0.auto/usb* auto auto defaults voldmanaged=usb:auto
/dev/block/bootdevice/by-name/misc /misc emmc defaults defaults
/dev/block/bootdevice/by-name/ftm /ftm emmc defaults defaults
/dev/cnas auto auto defaults voldmanaged=cnas:auto
default.prop
Code:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.oem_unlock_supported=1
ro.secure=1
security.perf_harden=1
ro.adb.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=boot
persist.healthd_msm.log_en=true
persist.service.chg_mode=LGE,QNOVO
ro.zygote=zygote64_32
pm.dexopt.first-boot=interpret-only
pm.dexopt.boot=verify-profile
pm.dexopt.install=interpret-only
pm.dexopt.bg-dexopt=speed-profile
pm.dexopt.ab-ota=speed-profile
pm.dexopt.nsys-library=speed
pm.dexopt.shared-apk=speed
pm.dexopt.forced-dexopt=speed
pm.dexopt.core-app=speed
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
ro.dalvik.vm.native.bridge=0
dalvik.vm.usejit=true
dalvik.vm.usejitprofiles=true
dalvik.vm.appimageformat=lz4
debug.atrace.tags.enableflags=0
#
# BOOTIMAGE_BUILD_PROPERTIES
#
ro.bootimage.build.date=Sat Sep 16 19:35:59 KST 2017
ro.bootimage.build.date.utc=1505558159
ro.bootimage.build.fingerprint=lge/joan_skt_kr/joan:7.1.2/N2G47H/172591935884a:user/release-keys
I am starting kernel source setup now
If you're wondering, yes, I am genuinely interested in buying the B&H Photo LG US998 model (carrier free, hopefully bootloader unlocked) and no I have no interest in bootloader locked devices

jcadduono said:
Thanks a lot!
A quick inspection notes the following:
CAF tag: LA.UM.5.8.r1-02200-8x98.0-1 = refs/tags/AU_LINUX_ANDROID_LA.UM.5.8.R1.07.01.02.290.022
Board codename: joan
Unlike previous variants, it is NOT using a dtb.img but instead the standard Image.gz-dtb format (gzip -9 < Image > Image.gz && cat Image.gz *.dtb > Image.gz-dtb)
Standard gzip+cpio ramdisk
Code:
[email protected]:~/Downloads/lg-v300s-v10j/LGMV300SAT-00-V10j-SKT-KR-SEP-16-2017-64G+0$ bootimg vv boot_4.img
BOARD_MAGIC ""
BOARD_CMDLINE "console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true androidboot.usbcontroller=a800000.dwc3 androidboot.hardware=joan buildvariant=user"
BOARD_PAGESIZE 4096
BOARD_BASE 0x00000000
BOARD_KERNEL_OFFSET 0x00008000
BOARD_RAMDISK_OFFSET 0x02000000
BOARD_SECOND_OFFSET 0x00F00000
BOARD_TAGS_OFFSET 0x00000100
BOARD_KERNEL_SIZE 19069782
BOARD_RAMDISK_SIZE 7370445
BOARD_SECOND_SIZE 0
BOARD_DT_SIZE 0
BOARD_HASH 0xefa953a47d291ccf70d7eba9f3bb5c12da03e8ff
[email protected]:~/Downloads/lg-v300s-v10j/LGMV300SAT-00-V10j-SKT-KR-SEP-16-2017-64G+0$ bootimg vv recovery_4.img
BOARD_MAGIC ""
BOARD_CMDLINE "console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=2048 androidboot.configfs=true androidboot.usbcontroller=a800000.dwc3 androidboot.hardware=joan buildvariant=user"
BOARD_PAGESIZE 4096
BOARD_BASE 0x00000000
BOARD_KERNEL_OFFSET 0x00008000
BOARD_RAMDISK_OFFSET 0x02000000
BOARD_SECOND_OFFSET 0x00F00000
BOARD_TAGS_OFFSET 0x00000100
BOARD_KERNEL_SIZE 19069782
BOARD_RAMDISK_SIZE 13043351
BOARD_SECOND_SIZE 0
BOARD_DT_SIZE 0
BOARD_HASH 0x7be0d1797b9ebf10a3afa49bac79973b148f0078
fstab.joan:
Code:
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/bootdevice/by-name/system /system ext4 ro,barrier=1,noatime wait,verify
/dev/block/bootdevice/by-name/cache /cache ext4 discard,nosuid,nodev,barrier=1,noatime,noauto_da_alloc,errors=continue wait,check
/dev/block/bootdevice/by-name/userdata /data ext4 discard,nosuid,nodev,barrier=1,noatime,noauto_da_alloc,errors=continue wait,check,forceencrypt=/dev/block/bootdevice/by-name/encrypt
/devices/soc/c0a4900.sdhci/mmc_host* auto auto nosuid,nodev wait,encryptable=/dev/block/bootdevice/by-name/encrypt,voldmanaged=external_SD:auto
/devices/soc/a800000.ssusb/a800000.dwc3/xhci-hcd.0.auto/usb* auto auto defaults voldmanaged=usb:auto
/dev/block/bootdevice/by-name/misc /misc emmc defaults defaults
/dev/block/bootdevice/by-name/ftm /ftm emmc defaults defaults
/dev/cnas auto auto defaults voldmanaged=cnas:auto
default.prop
Code:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.oem_unlock_supported=1
ro.secure=1
security.perf_harden=1
ro.adb.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=boot
persist.healthd_msm.log_en=true
persist.service.chg_mode=LGE,QNOVO
ro.zygote=zygote64_32
pm.dexopt.first-boot=interpret-only
pm.dexopt.boot=verify-profile
pm.dexopt.install=interpret-only
pm.dexopt.bg-dexopt=speed-profile
pm.dexopt.ab-ota=speed-profile
pm.dexopt.nsys-library=speed
pm.dexopt.shared-apk=speed
pm.dexopt.forced-dexopt=speed
pm.dexopt.core-app=speed
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
ro.dalvik.vm.native.bridge=0
dalvik.vm.usejit=true
dalvik.vm.usejitprofiles=true
dalvik.vm.appimageformat=lz4
debug.atrace.tags.enableflags=0
#
# BOOTIMAGE_BUILD_PROPERTIES
#
ro.bootimage.build.date=Sat Sep 16 19:35:59 KST 2017
ro.bootimage.build.date.utc=1505558159
ro.bootimage.build.fingerprint=lge/joan_skt_kr/joan:7.1.2/N2G47H/172591935884a:user/release-keys
I am starting kernel source setup now
If you're wondering, yes, I am genuinely interested in buying the B&H Photo LG US998 model (carrier free, hopefully bootloader unlocked) and no I have no interest in bootloader locked devices
Click to expand...
Click to collapse
do you think there are good chances to unlock korean variant from what you see around here ?

wolfgart said:
do you think there are good chances to unlock korean variant from what you see around here ?
Click to expand...
Click to collapse
i don't think an official unlock method will be available for it but who knows what devs here might accomplish, i'm not a binary hacking kind of guy so i couldn't tell you much of anything regarding unofficial unlock possibilities
anyways, keep an eye on https://github.com/jcadduono/android_kernel_lge_msm8998 if you guys like. you can see the code changes between v10a and v10j in the commits, i drastically reduced the size of the commits by ignoring all whitespace changes, automatically fixing whitespace and eol, and ignoring all blank line additions/removals not attached to modified lines and plan to continue this route
next up is a commit to fix build issues, and ihex the binaries... much work to come but should make it a great base to work with eventually

Love to have you on board jcad. You've done amazing work in the past. If only we could root the damn carrier devices.
Sent from my VS995 using Tapatalk

Can someone get me launcher apk and weather + widget apks please and share it here.

wolfgart said:
Hey guys,
here above a STOCK FULL DUMP of All partitions i have just created having my LGM-V300S - SW Version : 10j in hand ...
LINK
We can use for development and to try to find some valid Exploit...
Click to expand...
Click to collapse
a n00b question... i still have 10c. can i use this to update?

Is the Korean version of the v30 rootable with custom recovery?

Related

Looking For DEV To Help Port CWM For LG Optimus Elite

Hello xda, we are looking for a DEV because we are having trouble porting CWM on the new LG Optimus Elite and us Optimus Elite user's would GREATLY appreciate if someone could help us! We currently have root. The LG Optimus Elite forum is located at this link: http://androidforums.com/lg-optimus-elite/ Thanks!!

Android311 said:
Hello xda, we are looking for a DEV because we are having trouble porting CWM on the new LG Optimus Elite and us Optimus Elite user's would GREATLY appreciate if someone could help us! We currently have root. The LG Optimus Elite forum is located at this link: http://androidforums.com/lg-optimus-elite/ Thanks!!
Click to expand...
Click to collapse
+1
We need it bad if we there is any chance of getting custom roms. I would donate to the cause. Our user base at the phandroid forums are banging their heads atm trying to get it done. Any and all help is greatly appreciated. Thank you.

Yes I'm willing to donate and im sure user's here and over at androidforums are willing to donate as well! Help is Appreciated

I too would donate to get us a custom recovery.

Dat Bump! we need recovery bad!

+1

+1
This phone is a decent cheap phone.

+1 I really like this phone.

Is it just the CWM recovery that you're asking for? Need to know the partition information of your device.. (is there separate partition available for recovery or it uses the boot partition itself)

superatmos said:
Is it just the CWM recovery that you're asking for? Need to know the partition information of your device.. (is there separate partition available for recovery or it uses the boot partition itself)
Click to expand...
Click to collapse
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd C:\android-sdk-windows\platform-tools\
C:\android-sdk-windows\platform-tools>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ su
su
# cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 3864576 mmcblk0
179 1 2048 mmcblk0p1
179 2 2048 mmcblk0p2
179 3 7168 mmcblk0p3
179 4 1 mmcblk0p4
179 5 16384 mmcblk0p5
179 6 237568 mmcblk0p6
179 7 4096 mmcblk0p7
179 8 24576 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 4096 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 368640 mmcblk0p12
179 13 925696 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 2023424 mmcblk0p15
179 16 28672 mmcblk0p16
179 17 4096 mmcblk0p17
179 18 8192 mmcblk0p18
179 19 28672 mmcblk0p19
179 20 8192 mmcblk0p20
179 21 16384 mmcblk0p21
# cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extasec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extobb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p12 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p13 /data ext4 rw,nosuid,nodev,relatime,resuid=1000,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p6 /cache ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /persist ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p21 /mpt ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:15 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:15 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
# cat /proc/emmc
cat /proc/emmc
/proc/emmc: No such file or directory
# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
# exit
exit
$ exit
exit
C:\android-sdk-windows\platform-tools>adb shell
$ su
su
# cat /cache/recovery/last_log
cat /cache/recovery/last_log
Starting recovery on Fri Jan 11 04:38:09 1980
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache ext4 /dev/block/mmcblk0p6 (null)
2 /misc emmc /dev/block/mmcblk0 (null)
3 /boot emmc /dev/block/mmcblk0p9 (null)
4 /system ext4 /dev/block/mmcblk0p12 (null)
5 /data ext4 /dev/block/mmcblk0p13 (null)
6 /recovery emmc /dev/block/mmcblk0p14 (null)
7 /sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
8 /sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.build.id=ZV4.GWK74
ro.build.display.id=ZV4.GWK74
ro.build.version.lge=VM696ZV4
ro.build.version.incremental=47C45DFC
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Apr 5 14:53:48 KST 2012
ro.build.date.utc=1333605228
ro.build.type=user
ro.build.user=VM696
ro.build.host=builder1.nuribom.com
ro.build.tags=release-keys
ro.product.model=LG-VM696
ro.product.brand=lge
ro.product.name=m3s_virgin_us
ro.product.device=m3s
ro.modem.version=
ro.brand.name=LG Optimus Elite
ro.product.board=lge_m3s
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
ro.build.product=m3s
ro.build.description=m3s_virgin_us-user 2.3.7 ZV4.GWK74 47C45DFC release-keys
ro.build.fingerprint=lge/m3s_virgin_us/m3s:2.3.7/ZV4.GWK74/47C45DFC:user/release-keys
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=32m
dev.pm.dyn_samplingrate=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
lpa.decode=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=16
ro.config.ehrpd=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.opengles.version=131072
ro.qualcomm.bluetooth.dun=false
ro.bluetooth.remote.autoconnect=true
ro.cdma.home.operator.alpha=Virgin Mobile
ro.cdma.home.operator.numeric=311490
gsm.sim.operator.alpha=Virgin Mobile
gsm.sim.operator.numeric=311490
gsm.sim.operator.iso-country=us
gsm.operator.alpha=Virgin Mobile
gsm.operator.numeric=311490
gsm.operator.iso-country=us
gsm.sim.state=READY
persist.service.usbport.enable=1
ro.multi.rild=true
ro.qualcomm.bluetooth.ftp=true
debug.bt.discoverable_time=120
ro.bluetooth.request.master=false
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r9
ro.config.notification_sound=Pebble.ogg
ro.config.alarm_alert=Alarm1.ogg
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.yt=android-virgin-us
ro.com.google.clientidbase.am=android-virgin-us
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.ms=android-virgin-us
ro.config.ringtone=Beyond_the_Dream.ogg
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=3122137e
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=1
persist.radio.adb_log_on=0
persist.radio.mem_leak_debug=0
persist.radio.voip_enabled=0
persist.sys.language=en
persist.sys.country=US
persist.sys.localevar=
persist.sys.timezone=America/Chicago
persist.sys.sound_enable=2
init.svc.recovery=running
init.svc.adbd=running
Check sdcard for GOTA update : /sdcard/update.zip
Finding update package in sdcard...
I:Update location: /sdcard/update.zip
I:Update file path: /sdcard/update.zip
no image found in sdcard
E:failed to open /sdcard/update.zip (No such file or directory)
# exit
exit
$ exit
exit
Here is a fresh pull of the boot, system and recovery partitions as img files using dd commands:
Download req-files-for-custom-recovery-build-20120716.zip from Sendspace.com - send big files the easy way
Also, here are img files I pulled earlier for somebody else who tried to build CWM. These were pulled using cat commands and have been renamed to boot.img, system.img and recovery.img This zip also contains ADB output, build.prop, and last_log info:
Download Req-files-for-CWM-build.zip from Sendspace.com - send big files the easy way
Thank you very much for the help.

k_t_b said:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd C:\android-sdk-windows\platform-tools\
C:\android-sdk-windows\platform-tools>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$ su
su
# cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 3864576 mmcblk0
179 1 2048 mmcblk0p1
179 2 2048 mmcblk0p2
179 3 7168 mmcblk0p3
179 4 1 mmcblk0p4
179 5 16384 mmcblk0p5
179 6 237568 mmcblk0p6
179 7 4096 mmcblk0p7
179 8 24576 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 4096 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 368640 mmcblk0p12
179 13 925696 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 2023424 mmcblk0p15
179 16 28672 mmcblk0p16
179 17 4096 mmcblk0p17
179 18 8192 mmcblk0p18
179 19 28672 mmcblk0p19
179 20 8192 mmcblk0p20
179 21 16384 mmcblk0p21
# cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extasec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extobb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p12 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p13 /data ext4 rw,nosuid,nodev,relatime,resuid=1000,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p6 /cache ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /persist ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p21 /mpt ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:15 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:15 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
# cat /proc/emmc
cat /proc/emmc
/proc/emmc: No such file or directory
# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
# exit
exit
$ exit
exit
C:\android-sdk-windows\platform-tools>adb shell
$ su
su
# cat /cache/recovery/last_log
cat /cache/recovery/last_log
Starting recovery on Fri Jan 11 04:38:09 1980
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache ext4 /dev/block/mmcblk0p6 (null)
2 /misc emmc /dev/block/mmcblk0 (null)
3 /boot emmc /dev/block/mmcblk0p9 (null)
4 /system ext4 /dev/block/mmcblk0p12 (null)
5 /data ext4 /dev/block/mmcblk0p13 (null)
6 /recovery emmc /dev/block/mmcblk0p14 (null)
7 /sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
8 /sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.build.id=ZV4.GWK74
ro.build.display.id=ZV4.GWK74
ro.build.version.lge=VM696ZV4
ro.build.version.incremental=47C45DFC
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Apr 5 14:53:48 KST 2012
ro.build.date.utc=1333605228
ro.build.type=user
ro.build.user=VM696
ro.build.host=builder1.nuribom.com
ro.build.tags=release-keys
ro.product.model=LG-VM696
ro.product.brand=lge
ro.product.name=m3s_virgin_us
ro.product.device=m3s
ro.modem.version=
ro.brand.name=LG Optimus Elite
ro.product.board=lge_m3s
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
ro.build.product=m3s
ro.build.description=m3s_virgin_us-user 2.3.7 ZV4.GWK74 47C45DFC release-keys
ro.build.fingerprint=lge/m3s_virgin_us/m3s:2.3.7/ZV4.GWK74/47C45DFC:user/release-keys
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=32m
dev.pm.dyn_samplingrate=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
lpa.decode=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=16
ro.config.ehrpd=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.opengles.version=131072
ro.qualcomm.bluetooth.dun=false
ro.bluetooth.remote.autoconnect=true
ro.cdma.home.operator.alpha=Virgin Mobile
ro.cdma.home.operator.numeric=311490
gsm.sim.operator.alpha=Virgin Mobile
gsm.sim.operator.numeric=311490
gsm.sim.operator.iso-country=us
gsm.operator.alpha=Virgin Mobile
gsm.operator.numeric=311490
gsm.operator.iso-country=us
gsm.sim.state=READY
persist.service.usbport.enable=1
ro.multi.rild=true
ro.qualcomm.bluetooth.ftp=true
debug.bt.discoverable_time=120
ro.bluetooth.request.master=false
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r9
ro.config.notification_sound=Pebble.ogg
ro.config.alarm_alert=Alarm1.ogg
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.yt=android-virgin-us
ro.com.google.clientidbase.am=android-virgin-us
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.ms=android-virgin-us
ro.config.ringtone=Beyond_the_Dream.ogg
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=3122137e
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=1
persist.radio.adb_log_on=0
persist.radio.mem_leak_debug=0
persist.radio.voip_enabled=0
persist.sys.language=en
persist.sys.country=US
persist.sys.localevar=
persist.sys.timezone=America/Chicago
persist.sys.sound_enable=2
init.svc.recovery=running
init.svc.adbd=running
Check sdcard for GOTA update : /sdcard/update.zip
Finding update package in sdcard...
I:Update location: /sdcard/update.zip
I:Update file path: /sdcard/update.zip
no image found in sdcard
E:failed to open /sdcard/update.zip (No such file or directory)
# exit
exit
$ exit
exit
Here is a fresh pull of the boot, system and recovery partitions as img files using dd commands:
Download req-files-for-custom-recovery-build-20120716.zip from Sendspace.com - send big files the easy way
Also, here are img files I pulled earlier for somebody else who tried to build CWM. These were pulled using cat commands and have been renamed to boot.img, system.img and recovery.img This zip also contains ADB output, build.prop, and last_log info:
Download Req-files-for-CWM-build.zip from Sendspace.com - send big files the easy way
Thank you very much for the help.
Click to expand...
Click to collapse
Ok. You gave good amount of details.
Anyway, there looks like two separate partitions for boot as well as recovery but sometimes recovery partition might not be used at all.
I will try to make a recovery.img file and provide it here. You can use dd command to push it to recovery partition.

# cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 3864576 mmcblk0
179 1 2048 mmcblk0p1
179 2 2048 mmcblk0p2
179 3 7168 mmcblk0p3
179 4 1 mmcblk0p4
179 5 16384 mmcblk0p5
179 6 237568 mmcblk0p6
179 7 4096 mmcblk0p7
179 8 24576 mmcblk0p8
179 9 8192 mmcblk0p9
179 10 4096 mmcblk0p10
179 11 4096 mmcblk0p11
179 12 368640 mmcblk0p12
179 13 925696 mmcblk0p13
179 14 8192 mmcblk0p14
179 15 2023424 mmcblk0p15
179 16 28672 mmcblk0p16
179 17 4096 mmcblk0p17
179 18 8192 mmcblk0p18
179 19 28672 mmcblk0p19
179 20 8192 mmcblk0p20
179 21 16384 mmcblk0p21
# cat /proc/mounts
cat /proc/mounts
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extasec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/extobb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p12 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p13 /data ext4 rw,nosuid,nodev,relatime,resuid=1000,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p6 /cache ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /persist ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p21 /mpt ext4 rw,nosuid,nodev,relatime,barrier=1,data=ordered 0 0
/dev/block/vold/179:15 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:15 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
# cat /proc/emmc
cat /proc/emmc
/proc/emmc: No such file or directory
# cat /proc/mtd
cat /proc/mtd
dev: size erasesize name
# exit
exit
$ exit
exit
C:\android-sdk-windows\platform-tools>adb shell
$ su
su
# cat /cache/recovery/last_log
cat /cache/recovery/last_log
Starting recovery on Fri Jan 11 04:38:09 1980
framebuffer: fd 4 (320 x 480)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /cache ext4 /dev/block/mmcblk0p6 (null)
2 /misc emmc /dev/block/mmcblk0 (null)
3 /boot emmc /dev/block/mmcblk0p9 (null)
4 /system ext4 /dev/block/mmcblk0p12 (null)
5 /data ext4 /dev/block/mmcblk0p13 (null)
6 /recovery emmc /dev/block/mmcblk0p14 (null)
7 /sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
8 /sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adb.enable=1
ro.build.id=ZV4.GWK74
ro.build.display.id=ZV4.GWK74
ro.build.version.lge=VM696ZV4
ro.build.version.incremental=47C45DFC
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Apr 5 14:53:48 KST 2012
ro.build.date.utc=1333605228
ro.build.type=user
ro.build.user=VM696
ro.build.host=builder1.nuribom.com
ro.build.tags=release-keys
ro.product.model=LG-VM696
ro.product.brand=lge
ro.product.name=m3s_virgin_us
ro.product.device=m3s
ro.modem.version=
ro.brand.name=LG Optimus Elite
ro.product.board=lge_m3s
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
ro.build.product=m3s
ro.build.description=m3s_virgin_us-user 2.3.7 ZV4.GWK74 47C45DFC release-keys
ro.build.fingerprint=lge/m3s_virgin_us/m3s:2.3.7/ZV4.GWK74/47C45DFC:user/release-keys
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=32m
dev.pm.dyn_samplingrate=1
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
lpa.decode=true
ro.use_data_netmgrd=true
ro.emmc.sdcard.partition=16
ro.config.ehrpd=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
ro.opengles.version=131072
ro.qualcomm.bluetooth.dun=false
ro.bluetooth.remote.autoconnect=true
ro.cdma.home.operator.alpha=Virgin Mobile
ro.cdma.home.operator.numeric=311490
gsm.sim.operator.alpha=Virgin Mobile
gsm.sim.operator.numeric=311490
gsm.sim.operator.iso-country=us
gsm.operator.alpha=Virgin Mobile
gsm.operator.numeric=311490
gsm.operator.iso-country=us
gsm.sim.state=READY
persist.service.usbport.enable=1
ro.multi.rild=true
ro.qualcomm.bluetooth.ftp=true
debug.bt.discoverable_time=120
ro.bluetooth.request.master=false
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r9
ro.config.notification_sound=Pebble.ogg
ro.config.alarm_alert=Alarm1.ogg
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.yt=android-virgin-us
ro.com.google.clientidbase.am=android-virgin-us
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.ms=android-virgin-us
ro.config.ringtone=Beyond_the_Dream.ogg
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=3122137e
ro.bootmode=unknown
ro.baseband=msm
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=qcom
ro.revision=0
ro.emmc=1
persist.radio.adb_log_on=0
persist.radio.mem_leak_debug=0
persist.radio.voip_enabled=0
persist.sys.language=en
persist.sys.country=US
persist.sys.localevar=
persist.sys.timezone=America/Chicago
persist.sys.sound_enable=2
init.svc.recovery=running
init.svc.adbd=running

Can someone share only stock recovery.img and stock boot.img separately??

superatmos said:
Can someone share only stock recovery.img and stock boot.img separately??
Click to expand...
Click to collapse
boot partition: http://www.sendspace.com/file/89l97v
recovery partition: http://www.sendspace.com/file/zlibfl
BTW, I did try builder.clockworkmod.com http://jenkins.cyanogenmod.com/job/recovery/757/ and that recovery did not work.

k_t_b said:
boot partition: http://www.sendspace.com/file/89l97v
recovery partition: http://www.sendspace.com/file/zlibfl
BTW, I did try builder.clockworkmod.com http://jenkins.cyanogenmod.com/job/recovery/757/ and that recovery did not work.
Click to expand...
Click to collapse
for one, the partitions are all wrong. and most likely the kernel base address and cmdline are wrong also. "adb pull /proc/last_kmsg" run that and post here please. also review the output for any personal info, i.e. esn, msid, and so forth
also, pm me your gtalk. Im working on this right this second....

jmztaylor said:
for one, the partitions are all wrong. and most likely the kernel base address and cmdline are wrong also. "adb pull /proc/last_kmsg" run that and post here please. also review the output for any personal info, i.e. esn, msid, and so forth
also, pm me your gtalk. Im working on this right this second....
Click to expand...
Click to collapse
ESN has been replaced with 00000000000000
http://www.sendspace.com/file/ate07b
New last_kmsg after trying new recovery.img
http://www.sendspace.com/file/cgzcxm

Bump

Hi out there!
I think I´m a little bit in the wrong topic - bt I try to get a working CWM for LG Optimus 3D Max (LGP920).
For my device the recovery partiion is mmblck0p6.
I ran the CWM Online Builder too and copyed this new image to /dev/block.
But if I try booting into CWM, I only get a black screen and nothing happens.
Maybe you know what to do?!

I made a own thread here!

jmztaylor said:
for one, the partitions are all wrong. and most likely the kernel base address and cmdline are wrong also. "adb pull /proc/last_kmsg" run that and post here please. also review the output for any personal info, i.e. esn, msid, and so forth
also, pm me your gtalk. Im working on this right this second....
Click to expand...
Click to collapse
Here is a second build - http://jenkins.cyanogenmod.com/job/recovery/2467/
I still can't get it to work.
/proc/config.gz
CONFIG_PHYS_OFFSET=0x00200000
CONFIG_CMDLINE="init=/sbin/init root=/dev/ram rw initrd=0x11000000,16M mem=88M ip=dhcp"
recovery.fstab:
# mount point fstype device [device2]
/boot emmc /dev/block/mmcblk0p9
/cache ext4 /dev/block/mmcblk0p6
/data ext4 /dev/block/mmcblk0p13
/misc emmc /dev/block/mmcblk0
/recovery emmc /dev/block/mmcblk0p14
/system ext4 /dev/block/mmcblk0p12
/sdcard vfat /dev/block/mmcblk0p15 /dev/block/mmcblk0
/sdcard/_ExternalSD vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
I took the recovery.img which builder.clockworkmod.com spit out and padded it so it was the same size as the stock recovery:
$ su
# tr "\000" "\377" < /dev/zero | dd ibs=512k count=16384 of=/sdcard/recovery-final.img
16384+0 records in
16384+0 records out
8388608 bytes transferred in 0.356 secs (23563505 bytes/sec)
tr: short write
# busybox dd if=/sdcard/recovery.img of=/sdcard/recovery-final.img conv=notrunc
10920+0 records in
10920+0 records out
5591040 bytes (5.3MB) copied, 0.103271 seconds, 51.6MB/s
#
I zeroed out the recovery partition so I could boot into Fastboot:
$ su
# cat /dev/zero > /dev/block/mmcblk0p14
Then I renamed recovery-final.img to recovery.img and used Fastboot to flash it:
C:\Windows\system32>cd C:\Program Files\Android\android-sdk\platform-tools
C:\Program Files\Android\android-sdk\platform-tools>fastboot devices
3122137e fastboot
C:\Program Files\Android\android-sdk\platform-tools>fastboot flash recovery recovery.img
sending 'recovery' (8192 KB)...
OKAY [ 2.487s]
writing 'recovery'...
OKAY [ 5.478s]
finished. total time: 7.971s
C:\Program Files\Android\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.439s
C:\Program Files\Android\android-sdk\platform-tools>
I checked the md5sum for the partition to make sure it matched the recovery.img:
$ su
# busybox md5sum /dev/block/mmcblk0p14
561a27f5fcff924820758659b00422ea /dev/block/mmcblk0p14
I still can't boot into CWM recovery. Anybody have any ideas?
---------- Post added at 06:48 AM ---------- Previous post was at 06:28 AM ----------
last_kmsg:
http://www.sendspace.com/file/pmlauo

[ROM][WIP][JB][CWM][DEODEXED] XAS Stock 6.2.B.0.200 Firmware Flashable zip

This is the Stock XAS JB 6.2.B.0.200 Firmware. This is a work in Progress.
I'm not responsible for whatever happens to your device. Flash this at your own risk. Don't blame me for anything coz' I'll just smile at you.
Code:
- Rooted
- Deodexed
- Zipaligned
- Busybox
Instructions:
- BACK UP! BACK UP! BACK UP!
- Full wipe (Factory Reset, Cache/Dalvik Cache, System)
- Flash ROM
- Flash Stock JB Kernel (Whatever you prefer - This means if you have a stock "JB" modified kernel and you want to use it, then flash it after the ROM)
- ***** Slap an iPhone user
- Profit
- Reboot
- Enjoy!
- After first boot and setup Reboot your phone(This make's the phone much faster to load. In my Opinion)
Don't worry it should work if you follow the process above.
Now Stop Reading and start Downloading!!!
Code:
[B][SIZE="4"][COLOR="Red"]Download[/COLOR][/SIZE]:[/B]
[B][SIZE="4"][URL="http://www.androidfilehost.com/?fid=22979706399754776"]Link[/URL][/SIZE][/B]
Press thanks and rate the thread if you feel like to and Please give Credits if you're going to use the ROM as base...
Peace Out! :highfive:

Reserved

Reserved..

emceethemouth said:
Instructions:
- BACK UP! BACK UP! BACK UP!
- Full wipe (Factory Reset, Cache/Dalvik Cache, System)
- Flash ROM
- Flash Stock JB Kernel (whatever you prefer)
- ***** Slap an iPhone user
- Profit
Click to expand...
Click to collapse
I dont know any Iphone user... :crying:
will try to install, fingers crossed :silly:

ziecha said:
I dont know any Iphone user... :crying:
will try to install, fingers crossed :silly:
Click to expand...
Click to collapse
Lol!

So this is considered as a fresh rom n free from odex thing?

is the flashable zip a deodexed rom already?

error: Status 6 when installing... anyone else?

ziecha said:
error: Status 6 when installing... anyone else?
Click to expand...
Click to collapse
me too:crying:

in other words its not working??

Can anyone post the error, it's working fine before I posted it. Please post the recovery log so I can see what the error is. Thanks!

tanvinz said:
is the flashable zip a deodexed rom already?
Click to expand...
Click to collapse
I'll upload a dedexed version later.

emceethemouth said:
I'll upload a dedexed version later.
Click to expand...
Click to collapse
prefer kernel ?

Androidians said:
prefer kernel ?
Click to expand...
Click to collapse
The ROM already has a kernel, what i mean is, uf you have a prefered kernel of you choice and it supports stock JB then flash it. But if none, stick with the one that comes with the ROM.

Sir what do you mean by Zipaligned? and is it okay to flash this rom when my old rom is CM10?

darrensumaoy14 said:
Sir what do you mean by Zipaligned? and is it okay to flash this rom when my old rom is CM10?
Click to expand...
Click to collapse
It optimizes the way an Android application package (APK) is packaged. Doing so enables the Android operating system to interact with the application more efficiently, and has the potential to make the application and overall the whole system much faster. Execution time is minimized for zipaligned applications, resulting is lesser amount of RAM consumption when running the APK.
For your second question, yes its ok as long you do a full wipe before flashing it.

i found a way to root your stock rom if you dont trust this one by any chance or if you have errors, happened by coincidence lol
assuming you are on 4.1.2 stock and untouched, flash a custom kernel with twrp + cwm here http://forum.xda-developers.com/showthread.php?t=2309117 using flashtool and unplug your phone,
nexp power on your phone and quick tap sony logo before boot animation shows up to get into twrp,
next try to reboot your phone by pressing reboot in twrp and it will prompt you to root your phone since it's not rooted or to continue with reboot,
just slide to root
next reboot your phone and open superSU, it say about not being rooted properly but worry not, it needs to update
just pres "PLAY" in the bottom left corner of you screen and update superSU in play store
again i do not know what happened there, but it worked!

emceethemouth said:
Can anyone post the error, it's working fine before I posted it. Please post the recovery log so I can see what the error is. Thanks!
Click to expand...
Click to collapse
Starting recovery on Wed Jun 5 05:16:16 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (720 x 1280)
CWM-based Recovery v6.0.3.2
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p3 (null) 0
2 /system ext4 /dev/block/mmcblk0p12 (null) 0
3 /cache ext4 /dev/block/mmcblk0p13 (null) 0
4 /data ext4 /dev/block/mmcblk0p14 (null) -16384
5 /sdcard vfat /dev/block/mmcblk0p15 (null) 0
6 /external_sd vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=semc
ro.boot.baseband=msm
ro.boot.serialno=CB5120U370
ro.serialno=CB5120U370
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=semc
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39E
ro.build.display.id=cm_hikari-userdebug 4.2.2 JDQ39E eng.paul.20130507.192912 test-keys
ro.build.version.incremental=eng.paul.20130507.192912
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Вт. мая 7 19:31:20 ALMT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=paul
ro.build.host=paul-eME640
ro.build.tags=test-keys
ro.product.model=Xperia acro S
ro.product.brand=Sony
ro.product.name=LT26w_1266-3204
ro.product.device=hikari
ro.product.board=fuji
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
ro.build.product=hikari
ro.build.description=LT26w-user 4.0.4 6.1.A.2.50 zfd_zw test-keys
ro.build.fingerprint=SEMC/LT26w_1266-3204/LT26w:4.0.4/6.1.A.2.50/zfd_zw:user/release-keys
ro.build.characteristics=default
ro.cm.device=hikari
persist.data_netmgrd_nint=3
ro.sf.lcd_density=320
ro.hdmi.enable=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.telephony.ril_class=SonyFujiQualcommRIL
ro.telephony.ril.v3=skippinpukcount
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d
DEVICE_PROVISIONED=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.use_data_netmgrd=true
ro.ril.transmitpower=true
com.qc.hardware=true
dev.pm.dyn_samplingrate=1
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.opengles.version=131072
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.mdpcomp.logs=0
debug.egl.recordable.rgba8888=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130507-UNOFFICIAL-hikari
ro.modversion=10.1-20130507-UNOFFICIAL-hikari
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 2147467264
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8191
Label:
Blocks: 524284
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17192/524284 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 262144000
Block size: 4096
Blocks per group: 32768
Inodes per group: 8000
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 64000
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16000 inodes and 2065/64000 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
rm: can't remove '.' or '..'
rm: can't remove '.' or '..'
Data wipe complete.
-- Installing: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Finding update package...
I:Update location: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Opening update package...
Installing update...
installing samsung updater extensions
line 2 col 67: syntax error, unexpected STRING, expecting ',' or ')'
line 336 col 1: syntax error, unexpected $end, expecting ',' or ')'
2 parse errors
E:Error in /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
(Status 6)
Installation aborted.
I:Can't format unknown volume: /emmc

Zenkai86 said:
Starting recovery on Wed Jun 5 05:16:16 2013
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (720 x 1280)
CWM-based Recovery v6.0.3.2
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p3 (null) 0
2 /system ext4 /dev/block/mmcblk0p12 (null) 0
3 /cache ext4 /dev/block/mmcblk0p13 (null) 0
4 /data ext4 /dev/block/mmcblk0p14 (null) -16384
5 /sdcard vfat /dev/block/mmcblk0p15 (null) 0
6 /external_sd vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.hardware=semc
ro.boot.baseband=msm
ro.boot.serialno=CB5120U370
ro.serialno=CB5120U370
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=unknown
ro.hardware=semc
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39E
ro.build.display.id=cm_hikari-userdebug 4.2.2 JDQ39E eng.paul.20130507.192912 test-keys
ro.build.version.incremental=eng.paul.20130507.192912
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Вт. мая 7 19:31:20 ALMT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=paul
ro.build.host=paul-eME640
ro.build.tags=test-keys
ro.product.model=Xperia acro S
ro.product.brand=Sony
ro.product.name=LT26w_1266-3204
ro.product.device=hikari
ro.product.board=fuji
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
ro.build.product=hikari
ro.build.description=LT26w-user 4.0.4 6.1.A.2.50 zfd_zw test-keys
ro.build.fingerprint=SEMC/LT26w_1266-3204/LT26w:4.0.4/6.1.A.2.50/zfd_zw:user/release-keys
ro.build.characteristics=default
ro.cm.device=hikari
persist.data_netmgrd_nint=3
ro.sf.lcd_density=320
ro.hdmi.enable=true
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.telephony.ril_class=SonyFujiQualcommRIL
ro.telephony.ril.v3=skippinpukcount
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d
DEVICE_PROVISIONED=1
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.use_data_netmgrd=true
ro.ril.transmitpower=true
com.qc.hardware=true
dev.pm.dyn_samplingrate=1
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.opengles.version=131072
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.mdpcomp.logs=0
debug.egl.recordable.rgba8888=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130507-UNOFFICIAL-hikari
ro.modversion=10.1-20130507-UNOFFICIAL-hikari
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
-- Wiping data...
Formatting /data...
Creating filesystem with parameters:
Size: 2147467264
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8191
Label:
Blocks: 524284
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17192/524284 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 262144000
Block size: 4096
Blocks per group: 32768
Inodes per group: 8000
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 64000
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16000 inodes and 2065/64000 blocks
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
rm: can't remove '.' or '..'
rm: can't remove '.' or '..'
Data wipe complete.
-- Installing: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Finding update package...
I:Update location: /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
Opening update package...
Installing update...
installing samsung updater extensions
line 2 col 67: syntax error, unexpected STRING, expecting ',' or ')'
line 336 col 1: syntax error, unexpected $end, expecting ',' or ')'
2 parse errors
E:Error in /sdcard/3mc33th3mouTh_LT26w_PH_signed-60413.zip
(Status 6)
Installation aborted.
I:Can't format unknown volume: /emmc
Click to expand...
Click to collapse
This is also the error that i get

Ok Thanks, currently working on it. Hold on...

Recovery enable to mount external_sd

Dears,
to do a backup I actually have to reboot into recovery and start a backup to sdcard0.
It seems to be unable to mount exsdcard, also if I try to mount it manually.
I use ROM Manager 5.5.2.3 with CWM recovery 6.0.3.2, this is the recovery.log:
Starting recovery on Wed Jun 12 06:24:25 2013
framebuffer: fd 4 (720 x 1280)
ClockworkMod Recovery v6.0.3.2
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /efs ext4 /dev/block/mmcblk0p3 (null) 0
2 /boot emmc /dev/block/mmcblk0p8 (null) 0
3 /recovery emmc /dev/block/mmcblk0p9 (null) 0
4 /cache ext4 /dev/block/mmcblk0p12 (null) 0
5 /system ext4 /dev/block/mmcblk0p13 (null) 0
6 /data ext4 /dev/block/mmcblk0p16 (null) -16384
7 /preload ext4 /dev/block/mmcblk0p14 (null) 0
8 /modem emmc /dev/block/mmcblk0p10 (null) 0
9 /sdcard datamedia /dev/null (null) 0
10 /external_sd ext4 /dev/block/mmcblk1p1 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
Warning: No file_contexts
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.baseband=mdm
ro.boot.debug_level=0x4f4c
ro.boot.emmc_checksum=3
ro.boot.bootloader=N7105XXDMC3
ro.boot.serialno=42f72b9449b2bf03
ro.serialno=42f72b9449b2bf03
ro.bootmode=unknown
ro.baseband=mdm
ro.bootloader=N7105XXDMC3
ro.hardware=smdk4x12
ro.revision=10
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JDQ39E
ro.build.display.id=cm_t0lte-userdebug 4.2.2 JDQ39E eng.hudson.20130604.050149 test-keys
ro.build.version.incremental=eng.hudson.20130604.050149
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Tue Jun 4 05:02:34 PDT 2013
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=hudson
ro.build.host=koushik-lion
ro.build.tags=test-keys
ro.product.model=GT-N7105
ro.product.brand=samsung
ro.product.name=t0lte
ro.product.device=t0lte
ro.product.board=smdk4x12
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exynos4
ro.build.product=t0lte
ro.build.description=t0ltexx-user 4.1.2 JZO54K N7105XXDLL4 release-keys
ro.build.fingerprint=samsung/t0ltexx/t0lte:4.1.2/JZO54K/N7105XXDLL4:user/release-keys
ro.build.characteristics=default
ro.cm.device=t0lte
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/ttyS0
ro.telephony.default_network=9
telephony.lteOnGsmDevice=1
ro.sf.lcd_density=320
ro.lcd_min_brightness=20
persist.radio.adb_log_on=1
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130604-UNOFFICIAL-t0lte
ro.modversion=10.1-20130604-UNOFFICIAL-t0lte
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
ro.telephony.ril_class=SamsungQualcommRIL
mobiledata.interfaces=pdp0,wlan0,gprs,ppp0
ro.ril.hsxpa=1
ro.ril.gprsclass=10
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
hwui.render_dirty_regions=false
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
adb.recovery=1
init.svc.adbd=running
service.adb.root=1
I:Checking for extendedcommand...
I:Running extendedcommand...
Waiting for SD Card to mount (20s)
I:using /data/media for /sdcard.
SD Card mounted...
Verifying SD Card marker...
0b563cbc46d6718583b43d603d158511
I:Running script:
I:
run_program("/sbin/cp", "-R", "/cache/recovery", "/tmp/recovery");
ui_print("ROM Manager Version 5.5.2.3");
ui_print("12 giugno 2013");
assert(backup_rom("/external_sd/clockworkmod/backup/2013-06-12-08.23.48"));
parse returned 0; 0 errors encountered
about to run program [/sbin/cp] with 4 args
ROM Manager Version 5.5.2.3
12 giugno 2013
I:using /data/media for /sdcard.
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument)
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument)
Can't mount backup path.
result was NULL, message is: assert failed: backup_rom("/external_sd/clockworkmod/backup/2013-06-12-08.23.48")
I:using /data/media for /sdcard.
Thanks everybody!

Try with TWRP recovery.. Works every time with me..
Sent from my GT-N7100

sdcard Marker
Sent from my GT-N7100 using XDA Premium 4 mobile app

JSS15J.I747UCUEMJ2 (Android 4.3)

Heimdall Files
I747UCUEMJ2.7z (757.8 MB)
MD5: 9A5CCBB72E6AD2D0B4AC9CA086EB90FA
SELinux and KNOX are present.
ro.build.selinux=1
ro.config.tima=1
Wanna buy me a beer? Head over here
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.I747UCUEMJ2
ro.build.version.incremental=I747UCUEMJ2
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Sat Oct 5 00:20:33 KST 2013
ro.build.date.utc=1380900033
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0301-06
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I747
ro.product.brand=samsung
ro.product.name=d2uc
ro.product.device=d2att
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2att
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2uc-user 4.3 JSS15J I747UCUEMJ2 release-keys
ro.build.fingerprint=samsung/d2uc/d2att:4.3/JSS15J/I747UCUEMJ2:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I747UCUEMJ2
ro.build.hidden_ver=I747UCUEMJ2
ro.build.changelist=1804024
ro.product_ship=false
ro.chipname=
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=false
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
#
# System prop for Tvout/HDMI
#
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System property for Default touch key light duration
ro.button_key_light=6000
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for HDMI/WFD
persist.sys.camera.connect=0
persist.sys.camera.transform=0
persist.sys.videomode=0
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.monkey=0
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0

Interesting... Hopefully Canadians get the 4.3 soon as well. Telus is notoriously known for late updates.

Ok call me stupid, but what can I do with this? Lol
Edit: seems I can't even download. Freezes my browser and closes. Don't have access to my laptop for a while either. Oh well.

golastic
Wow..very quick:good:

Has anyone flashed this yet? I want to try, but can afford to be a guinea pig.

designgears said:
Heimdall Files
I747UCUEMJ2.7z (757.8 MB)
MD5: 9A5CCBB72E6AD2D0B4AC9CA086EB90FA
SELinux and KNOX are present.
ro.build.selinux=1
ro.config.tima=1
Wanna buy me a beer? Head over here
Click to expand...
Click to collapse
You are the man, DG. Thanks. Been hoping for a S3 leak since I saw the one you got for the HTC One.

designgears said:
Heimdall Files
I747UCUEMJ2.7z (757.8 MB)
MD5: 9A5CCBB72E6AD2D0B4AC9CA086EB90FA
SELinux and KNOX are present.
ro.build.selinux=1
ro.config.tima=1
I downloaded the file and attempted to flash with Heimdall, but received the following error: Tar header contained an invalid file size. I did realized that I need to change the name of the file from *.7z to *.tar.gz. It's been forever since I flashed anything with Heimdall (Capitivate days), so any help would be greatly appreciated. Using Heimdall Suite 1.3.0 (can't get 1.4.0 to work).
Click to expand...
Click to collapse

roemicha said:
designgears said:
Heimdall Files
I747UCUEMJ2.7z (757.8 MB)
MD5: 9A5CCBB72E6AD2D0B4AC9CA086EB90FA
SELinux and KNOX are present.
ro.build.selinux=1
ro.config.tima=1
I downloaded the file and attempted to flash with Heimdall, but received the following error: Tar header contained an invalid file size. I did realized that I need to change the name of the file from *.7z to *.tar.gz. It's been forever since I flashed anything with Heimdall (Capitivate days), so any help would be greatly appreciated. Using Heimdall Suite 1.3.0 (can't get 1.4.0 to work).
Click to expand...
Click to collapse
Click to expand...
Click to collapse
From what I can see, it looks that we will need to extract DG's file and add each piece into the Flash tab in Heimdall then hit Start. DG feel free to correct me if I'm wrong on that.

DexedrineXR said:
Interesting... Hopefully Canadians get the 4.3 soon as well. Telus is notoriously known for late updates.
Click to expand...
Click to collapse
Never fear, Rogers will release it first. They are pretty good with android updates

Looks like there may even be a newer version (I747UCUEMJ3). Just FYI for everyone.
http://gfxbench.com/device.jsp?benchmark=gfx27&D=Samsung+Galaxy+S+III+%28USA%3A+SCH-R530%2C+SCH-I535%2C+SPH-L710%2C+SGH-I747%2C+SGH-T999%29&testgroup=system

I'm gonna download and take the plunge. I have class today so I won't be able to report back right away
Sent from my SGH-I747 using Tapatalk 4

I downloaded the file and unzipped it to find the following and believe that I have correctly attached with the right Heimdall Partial. Here is what I have:
aboot.mbn ---> ABOOT
boot.img ---> BOOT
cache.img.ext4 ---> CACHE
D2_USA_ATT_16G.pit ---> PIT
NON-HLOS ---> ?
persist.img.ext4 --> PERSIST
recovery.img ---> RECOVERY
rpm.mbn ---> RPM
sbl1.mbn ---> SBL1
sbl2.mbn ---> SBL2
sbl3.mbn ---> SBL3
system.img.ext4 ---> SYSTEM
tz.mbn ---> TZ
Please correct me if I'm wrong. I want to take the plunge, but do not want to brick my phone.

roemicha said:
I downloaded the file and unzipped it to find the following and believe that I have correctly attached with the right Heimdall Partial. Here is what I have:
aboot.mbn ---> ABOOT
boot.img ---> BOOT
cache.img.ext4 ---> CACHE
D2_USA_ATT_16G.pit ---> PIT
NON-HLOS ---> ?
persist.img.ext4 --> PERSIST
recovery.img ---> RECOVERY
rpm.mbn ---> RPM
sbl1.mbn ---> SBL1
sbl2.mbn ---> SBL2
sbl3.mbn ---> SBL3
system.img.ext4 ---> SYSTEM
tz.mbn ---> TZ
Please correct me if I'm wrong. I want to take the plunge, but do not want to brick my phone.
Click to expand...
Click to collapse
That looks right. The HLOS is the modem.
It worked for me.

I did realized that I need to change the name of the file from *.7z to *.tar.gz. It's been forever since I flashed anything with Heimdall (Capitivate days), so any help would be greatly appreciated.
Click to expand...
Click to collapse
You do not need to change the name. You need to use 7zip to unpack the tar.gz file which is compressed within the .7z Simply renaming it will not work.

Here is what I have:
aboot.mbn ---> ABOOT
boot.img ---> BOOT
cache.img.ext4 ---> CACHE
D2_USA_ATT_16G.pit ---> PIT
NON-HLOS ---> Modemn
persist.img.ext4 --> PERSIST
recovery.img ---> RECOVERY
rpm.mbn ---> RPM
sbl1.mbn ---> SBL1
sbl2.mbn ---> SBL2
sbl3.mbn ---> SBL3
system.img.ext4 ---> SYSTEM
tz.mbn ---> TZ
When I push start, I get the following:
Initialsing connection...
Detecting device...
Claiming interface...
Setting up interface...
Beginning session...
Error: Failed to begin session
Any thought on what I might have done wrong? Sorry, It's been forever since I used Heimdall to flash anything.

omkhar said:
You do not need to change the name. You need to use 7zip to unpack the tar.gz file which is compressed within the .7z Simply renaming it will not work.
Click to expand...
Click to collapse
the .7z does not contain a packaged tar.gz. If and when the files are repacked to tar.gz and flashed an error occurs of a missing .xml file? Im stumped at this point

stewartsoda said:
It worked for me.
Click to expand...
Click to collapse
stewertsoda - What did you do to get it to work?

Are you in download mode? I did have to install some driver using the tool in the Heimdall folder.

Wiped my internal sd card upon flashing. backup....just great...

Is there anyway to make this Odin flashable? I cannot get Heimdall to work. Will try when I get home from work.

Classpath error while building LineageOS

I've been trying to build LineageOS on my laptop, but I get this error:
Code:
Fatal Error: Unable to find package java.lang in classpath or bootclasspath
Here is a part of the log:
Code:
including vendor/cm/vendorsetup.sh
Looking for dependencies in device/xiaomi/kenzo
Looking for dependencies in device/xiaomi/msm8956-common
Looking for dependencies in device/qcom/common
Dependencies file not found, bailing out.
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
LINEAGE_VERSION=14.1-20170819-UNOFFICIAL-kenzo
TARGET_PRODUCT=lineage_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.12.4-1-ARCH-x86_64-with-glibc2.2.5
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/vinayak/android/lineage/out
============================================
make: Entering directory '/home/vinayak/android/lineage'
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
LINEAGE_VERSION=14.1-20170819-UNOFFICIAL-kenzo
TARGET_PRODUCT=lineage_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.12.4-1-ARCH-x86_64-with-glibc2.2.5
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/vinayak/android/lineage/out
============================================
Running kati to generate build-lineage_kenzo.ninja...
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
LINEAGE_VERSION=14.1-20170819-UNOFFICIAL-kenzo
TARGET_PRODUCT=lineage_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.12.4-1-ARCH-x86_64-with-glibc2.2.5
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/vinayak/android/lineage/out
============================================
build/core/binary.mk:37: camera.msm8952 uses kernel headers, but does not depend on them!
build/core/binary.mk:1253: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1253: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1253: external/pdfium/third_party/pdfiumbigint.mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
build/core/binary.mk:1253: external/pdfium/third_party/pdfiumbigint.mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
./external/speex/Android.mk:56: TODOArm64: enable neon in libspeex
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
Starting build with ninja
ninja: Entering directory `.'
[ 0% 6/49508] Aidl: framework <= frameworks/base/telephony/java/com/android/internal/telephony/ISmsSecurityAgent.aidl
[ 0% 7/49508] Aidl: framework <= frameworks/base/telephony/java/com/android/internal/telephony/ISmsSecurityService.aidl
[ 0% 8/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/themes/IThemeProcessingListener.aidl
[ 0% 9/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/weather/IRequestInfoListener.aidl
[ 0% 10/49508] Aidl: org.cyanogenmod.platform.internal <= vendor/cmsdk/sdk/src/java/org/cyanogenmod/internal/themes/IIconCacheManager.aidl
[ 0% 11/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/themes/IThemeService.aidl
[ 0% 12/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/media/ICMAudioService.aidl
[ 0% 13/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/weather/ICMWeatherManager.aidl
[ 0% 14/49508] target Java: framework-protos (/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes)
FAILED: /bin/bash -c "(rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes-full-debug.jar ) && (rm -rf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes ) && (mkdir -p /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/ ) && (mkdir -p /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes ) && (for f in /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/javalib.jar; do if [ ! -f \$f ]; then echo Missing file \$f; exit 1; fi; unzip -qo \$f -d /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes; done ) && (rm -rf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/META-INF ) && (rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list ) && (touch /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list ) && (if [ -d \"/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/src\" ]; then find /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/src -name '*.java' -and -not -name '.*' >> /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list; fi ) && (tr ' ' '\\n' < /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list | build/tools/normalize_path.py | sort -u > /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq ) && (if [ -s /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq ] ; then javac -J-Xmx1024M -Xmaxerrs 9999999 -encoding UTF-8 -bootclasspath \"\" -classpath /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/core-libart_intermediates/classes.jar:/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/core-oj_intermediates/classes.jar:/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/javalib.jar -extdirs \"\" -d /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes -g -source 1.8 -target 1.8 \\@/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq || ( rm -rf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes ; exit 41 ) fi ) && (rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list ) && (rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq ) && (jar -cf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes-full-debug.jar -C /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes . )"
Fatal Error: Unable to find package java.lang in classpath or bootclasspath
[ 0% 14/49508] host C: libexpat <= external/expat/lib/xmltok.c
[ 0% 14/49508] host C: libexpat <= external/expat/lib/xmlparse.c
[ 0% 14/49508] host Java: rmtypedefs (/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/rmtypedefs_intermediates/classes)
[ 0% 14/49508] host Java: jarjar (/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/jarjar_intermediates/classes)
[ 0% 14/49508] host Java: doclava (/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes)
FAILED: /bin/bash -c "(rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar ) && (rm -rf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes ) && (mkdir -p /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/ ) && (mkdir -p /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes ) && (for f in /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/tagsouplib_intermediates/javalib.jar; do if [ ! -f \$f ]; then echo Missing file \$f; exit 1; fi; unzip -qo \$f -d /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes; done ) && (rm -rf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/META-INF ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (touch /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (echo -n 'external/doclava/src/com/google/doclava/AnnotationInstanceInfo.java external/doclava/src/com/google/doclava/AnnotationValueInfo.java external/doclava/src/com/google/doclava/AtLinksNavTree.java external/doclava/src/com/google/doclava/AttrTagInfo.java external/doclava/src/com/google/doclava/AttributeInfo.java external/doclava/src/com/google/doclava/ClassInfo.java external/doclava/src/com/google/doclava/ClearPage.java external/doclava/src/com/google/doclava/CodeTagInfo.java external/doclava/src/com/google/doclava/Comment.java external/doclava/src/com/google/doclava/ContainerInfo.java external/doclava/src/com/google/doclava/Converter.java external/doclava/src/com/google/doclava/DocFile.java external/doclava/src/com/google/doclava/DocInfo.java external/doclava/src/com/google/doclava/Doclava.java external/doclava/src/com/google/doclava/Doclava2.java external/doclava/src/com/google/doclava/DoclavaDiff.java external/doclava/src/com/google/doclava/Errors.java external/doclava/src/com/google/doclava/FederatedSite.java external/doclava/src/com/google/doclava/FederationTagger.java external/doclava/src/com/google/doclava/FieldInfo.java external/doclava/src/com/google/doclava/Hierarchy.java external/doclava/src/com/google/doclava/InfoBuilder.java external/doclava/src/com/google/doclava/InheritedTags.java external/doclava/src/com/google/doclava/JarUtils.java external/doclava/src/com/google/doclava/KeywordEntry.java external/doclava/src/com/google/doclava/LinkReference.java external/doclava/src/com/google/doclava/LiteralTagInfo.java external/doclava/src/com/google/doclava/MemberInfo.java external/doclava/src/com/google/doclava/MethodInfo.java external/doclava/src/com/google/doclava/NavTree.java external/doclava/src/com/google/doclava/PackageInfo.java external/doclava/src/com/google/doclava/PageMetadata.java external/doclava/src/com/google/doclava/ParamTagInfo.java external/doclava/src/com/google/doclava/ParameterInfo.java external/doclava/src/com/google/doclava/ParsedTagInfo.java external/doclava/src/com/google/doclava/Proofread.java external/doclava/src/com/google/doclava/Resolution.java external/doclava/src/com/google/doclava/Resolvable.java external/doclava/src/com/google/doclava/SampleCode.java external/doclava/src/com/google/doclava/SampleTagInfo.java external/doclava/src/com/google/doclava/Scoped.java external/doclava/src/com/google/doclava/SeeTagInfo.java external/doclava/src/com/google/doclava/SinceTagger.java external/doclava/src/com/google/doclava/Sorter.java external/doclava/src/com/google/doclava/SourcePositionInfo.java external/doclava/src/com/google/doclava/Stubs.java external/doclava/src/com/google/doclava/TagInfo.java external/doclava/src/com/google/doclava/TextTagInfo.java external/doclava/src/com/google/doclava/ThrowsTagInfo.java external/doclava/src/com/google/doclava/TodoFile.java external/doclava/src/com/google/doclava/TypeInfo.java external/doclava/src/com/google/doclava/apicheck/AbstractMethodInfo.java external/doclava/src/com/google/doclava/apicheck/ApiCheck.java external/doclava/src/com/google/doclava/apicheck/ApiFile.java external/doclava/src/com/google/doclava/apicheck/ApiInfo.java external/doclava/src/com/google/doclava/apicheck/ApiParseException.java external/doclava/src/com/google/doclava/apicheck/XmlApiFile.java external/doclava/src/com/google/doclava/parser/JavaLexer.java external/doclava/src/com/google/doclava/parser/JavaParser.java ' >> /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (if [ -d \"/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/src\" ]; then find /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/src -name '*.java' -and -not -name '.*' >> /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list; fi ) && (tr ' ' '\\n' < /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list | build/tools/normalize_path.py | sort -u > /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq ) && (if [ -s /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq ] ; then javac -J-Xmx1024M -Xmaxerrs 9999999 -encoding UTF-8 -classpath /home/vinayak/android/lineage/out/host/linux-x86/framework/antlr-runtime.jar:/home/vinayak/android/lineage/out/host/linux-x86/framework/guavalib.jar:/home/vinayak/android/lineage/out/host/linux-x86/framework/jsilver.jar:/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/tagsouplib_intermediates/javalib.jar:/usr/lib/jvm/java-8-openjdk/bin/../lib/tools.jar -extdirs \"\" -d /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes -g -source 1.8 -target 1.8 \\@/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq || ( rm -rf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes ; exit 41 ) fi ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq ) && (jar -cf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar -C /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes . ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (touch /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (echo -n '-C \"external/doclava/res\" \"assets/customizations/assets/customizations.css\" -C \"external/doclava/res\" \"assets/customizations/assets/customizations.js\" -C \"external/doclava/res\" \"assets/customizations/customizations.cs\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-core.css\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-docs.css\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-docs.js\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-reference.js\" -C \"external/doclava/res\" \"assets/templates/assets/images/bg_fade.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/bg_logo.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/body-gradient-tab.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/body-gradient.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/grad-rule-qv.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/hr_gray_main.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/hr_gray_side.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/left_off.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/left_on.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/preliminary.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-e.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-e2.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-eg.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-s.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-s2.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-sg.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/right_off.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/right_on.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/sidenav-rule.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/spacer.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-closed-small.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-closed.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-opened-small.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-opened.png\" -C \"external/doclava/res\" \"assets/templates/assets/jquery-history.js\" -C \"external/doclava/res\" \"assets/templates/assets/jquery-resizable.min.js\" -C \"external/doclava/res\" \"assets/templates/assets/prettify.js\" -C \"external/doclava/res\" \"assets/templates/assets/search_autocomplete.js\" -C \"external/doclava/res\" \"assets/templates/assets/style.css\" -C \"external/doclava/res\" \"assets/templates/assets/triangle-none.gif\" -C \"external/doclava/res\" \"assets/templates/at_links_navtree.cs\" -C \"external/doclava/res\" \"assets/templates/class.cs\" -C \"external/doclava/res\" \"assets/templates/classes.cs\" -C \"external/doclava/res\" \"assets/templates/components.cs\" -C \"external/doclava/res\" \"assets/templates/components/api_filter.cs\" -C \"external/doclava/res\" \"assets/templates/components/left_nav.cs\" -C \"external/doclava/res\" \"assets/templates/components/masthead.cs\" -C \"external/doclava/res\" \"assets/templates/components/search_box.cs\" -C \"external/doclava/res\" \"assets/templates/data.hdf\" -C \"external/doclava/res\" \"assets/templates/designpage.cs\" -C \"external/doclava/res\" \"assets/templates/diff.cs\" -C \"external/doclava/res\" \"assets/templates/docpage.cs\" -C \"external/doclava/res\" \"assets/templates/doctype.cs\" -C \"external/doclava/res\" \"assets/templates/footer.cs\" -C \"external/doclava/res\" \"assets/templates/head_tag.cs\" -C \"external/doclava/res\" \"assets/templates/header.cs\" -C \"external/doclava/res\" \"assets/templates/hierarchy.cs\" -C \"external/doclava/res\" \"assets/templates/index.cs\" -C \"external/doclava/res\" \"assets/templates/jd_lists.cs\" -C \"external/doclava/res\" \"assets/templates/jd_lists_unified.cs\" -C \"external/doclava/res\" \"assets/templates/keywords.cs\" -C \"external/doclava/res\" \"assets/templates/lists.cs\" -C \"external/doclava/res\" \"assets/templates/macros.cs\" -C \"external/doclava/res\" \"assets/templates/navtree_data.cs\" -C \"external/doclava/res\" \"assets/templates/nosidenavpage.cs\" -C \"external/doclava/res\" \"assets/templates/package-list.cs\" -C \"external/doclava/res\" \"assets/templates/package.cs\" -C \"external/doclava/res\" \"assets/templates/packages.cs\" -C \"external/doclava/res\" \"assets/templates/sample.cs\" -C \"external/doclava/res\" \"assets/templates/sampleindex.cs\" -C \"external/doclava/res\" \"assets/templates/timestamp.cs\" -C \"external/doclava/res\" \"assets/templates/todo.cs\" -C \"external/doclava/res\" \"assets/templates/trailer.cs\" -C \"external/doclava/res\" \"assets/templates/yaml_navtree.cs\" ' >> /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (jar uf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar @/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list )"
external/doclava/src/com/google/doclava/AnnotationInstanceInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
^
external/doclava/src/com/google/doclava/ClassInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
^
external/doclava/src/com/google/doclava/DocInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
^
external/doclava/src/com/google/doclava/AnnotationInstanceInfo.java:127: error: cannot find symbol
public static void makeLinkListHDF(Data data, String base, AnnotationInstanceInfo[] annotations) {
^
symbol: class Data
location: class AnnotationInstanceInfo
external/doclava/src/com/google/doclava/TypeInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
.
.
.
.
.
symbol: class BitSet
location: class JavaParser
external/doclava/src/com/google/doclava/TodoFile.java:67: error: cannot find symbol
Data data = Doclava.makeHDF();
^
symbol: class Data
location: class TodoFile
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
10844 errors
ninja: build stopped: subcommand failed.
make: Leaving directory '/home/vinayak/android/lineage'
[0;31m#### make failed to build some targets (53 seconds) ####[00m

va6996 said:
I've been trying to build LineageOS on my laptop, but I get this error...
Click to expand...
Click to collapse
The following link reflects a possible solution that is similar to your error within it.
https://forum.xda-developers.com/showthread.php?t=2259929&page=3
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!

Ibuprophen said:
The following link reflects a possible solution that is similar to your error within it.
https://forum.xda-developers.com/showthread.php?t=2259929&page=3
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
Click to expand...
Click to collapse
Thanks a lot! I also realized I had to make clean because it wasn't removing the regenerated files.

va6996 said:
Thanks a lot! I also realized I had to make clean because it wasn't removing the regenerated files.
Click to expand...
Click to collapse
There's also a bunch of threads out there that are very helpful for building ROM's.
Here's just a few of them that could help you out too in case the other link may not work out for you.
[NEW][GUIDE] How-to build LineageOS 14.1 [SIMPLE][USER-FRIENDLY] by FSadino
[HOW TO] Beginners Guide to Android ROM Development by isidromxz
[GUIDE][COMPLETE] Android ROM Development From Source To End by jackeagle
To be honest, I've got an understanding on ROM development but, I've never, personally, developed any. I've only really stuck to developing apps.
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!

Ibuprophen said:
There's also a bunch of threads out there that are very helpful for building ROM's.
Here's just a few of them that could help you out too in case the other link may not work out for you.
[NEW][GUIDE] How-to build LineageOS 14.1 [SIMPLE][USER-FRIENDLY] by FSadino
[HOW TO] Beginners Guide to Android ROM Development by isidromxz
[GUIDE][COMPLETE] Android ROM Development From Source To End by jackeagle
To be honest, I've got an understanding on ROM development but, I've never, personally, developed any. I've only really stuck to developing apps.
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
Click to expand...
Click to collapse
Thanks a lot! I was finally able to build it. However, I see that ccache isn't working for me for some reason. The ccache directory size is just 56MB. The build takes the same amount of time ~5hr(on my laptop). I've even set the cache size as 70GB. However, my out directory is 55.7GB. What am I doing wrong?
Probable relevant parts:
Code:
[ 99% 40898/40912] Target cache fs ima...age/out/target/product/kenzo/cache.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img ext4 cache 268435456 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L cache -l 268435456 -a cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label: cache
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16384 inodes and 2089/65536 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img', 'ext4', 'cache', '268435456', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img maxsize=273985536 blocksize=135168 total=6398184 reserve=2838528
[ 99% 40904/40912] Construct recovery from boot
failed to reconstruct target deflate chunk 1 [(null)]; treating as normal
chunk 0: type 0 start 0 len 9041930
chunk 1: type 2 start 9041930 len 4148992
chunk 2: type 0 start 10711741 len 1347
Construct patches for 3 chunks...
patch 0 is 205 bytes (of 9041930)
patch 1 is 5082118 bytes (of 1669811)
patch 2 is 152 bytes (of 1347)
chunk 0: normal ( 0, 9041930) 205
chunk 1: deflate ( 9041930, 7662273) 5082118 (null)
chunk 2: normal ( 16704203, 1333) 152
[ 99% 40904/40912] Target userdata fs .../out/target/product/kenzo/userdata.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img ext4 data 26838785024 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L data -l 26838785024 -a data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 26838781952
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label: data
Blocks: 6552437
Block groups: 200
Reserved block group size: 1024
Created filesystem with 38/1638400 inodes and 150074/6552437 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img', 'ext4', 'data', '26838785024', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img maxsize=27400671936 blocksize=135168 total=155432808 reserve=276824064
[ 99% 40908/40912] Target system fs im...G/systemimage_intermediates/system.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 2684354560 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L system -l 2684354560 -a system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3340/163840 inodes and 292571/655360 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img', 'ext4', 'system', '2684354560', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
[ 99% 40909/40912] Install system fs i...ge/out/target/product/kenzo/system.img
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system.img+/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=2740531200 blocksize=135168 total=1160426351 reserve=27709440
[ 99% 40910/40912] Package target file...eage_kenzo-target_files-d4b338b746.zip
using prebuilt recovery.img from BOOTABLE_IMAGES...
using prebuilt boot.img from BOOTABLE_IMAGES...
putting script in bin/install-recovery.sh
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-cmkmqI
++++ boot ++++
using prebuilt boot.img from BOOTABLE_IMAGES...
++++ recovery ++++
using prebuilt recovery.img from BOOTABLE_IMAGES...
++++ recovery (two-step image) ++++
building image from target_files RECOVERY...
running: mkbootfs -f /tmp/targetfiles-cmkmqI/META/recovery_filesystem_config.txt /tmp/targetfiles-cmkmqI/RECOVERY/RAMDISK
running: minigzip
running: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/mkbootimg --kernel /tmp/targetfiles-cmkmqI/RECOVERY/kernel --cmdline androidboot.hardware=qcom ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 ramoops_memreserve=4M buildvariant=userdebug --base 0x80000000 --pagesize 2048 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --os_version 7.1.2 --os_patch_level 2017-08-05 --ramdisk /tmp/tmpFzhpAo --output /tmp/tmpBQOvrL
++++ system ++++
creating system.img...
BuildImage: in_dir = /tmp/targetfiles-cmkmqI/system, out_file = /tmp/system-d7Wo62.img
fs type is not ext4
Running: mkuserimg.sh -s /tmp/targetfiles-cmkmqI/system /tmp/system-d7Wo62.img ext4 system 2684354560 -T 1230748200 -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system /tmp/targetfiles-cmkmqI/META/file_contexts.bin
make_ext4fs -s -T 1230748200 -S /tmp/targetfiles-cmkmqI/META/file_contexts.bin -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system -l 2684354560 -a system /tmp/system-d7Wo62.img /tmp/targetfiles-cmkmqI/system
loaded 3332 fs_config entries
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3342/163840 inodes and 292951/655360 blocks
Running ['mkuserimg.sh', '-s', '/tmp/targetfiles-cmkmqI/system', '/tmp/system-d7Wo62.img', 'ext4', 'system', '2684354560', '-T', '1230748200', '-C', '/tmp/targetfiles-cmkmqI/META/filesystem_config.txt', '-B', '/tmp/system-blocklist-OsEPwM.map', '-L', 'system', '/tmp/targetfiles-cmkmqI/META/file_contexts.bin'] command, exit code = 0
++++ userdata ++++
creating userdata.img...
BuildImage: in_dir = /tmp/tmpbdwQbq/data, out_file = /tmp/tmpucca6X
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpucca6X 26838785024
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 26838785024 /tmp/tmpucca6X
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 1.250%
Info: Overprovision segments = 323 (GC reserved = 167)
Running ['mkf2fsuserimg.sh', '/tmp/tmpucca6X', '26838785024'] command, exit code = 0
userdata size (14) is 0.00% of limit (26838785024)
++++ extrauserdata ++++
++++ cache ++++
creating cache.img...
BuildImage: in_dir = /tmp/tmpQp6j5q/cache, out_file = /tmp/tmpPUYQ9G
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpPUYQ9G 268435456
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 268435456 /tmp/tmpPUYQ9G
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 15.000%
Info: Overprovision segments = 35 (GC reserved = 21)
Running ['mkf2fsuserimg.sh', '/tmp/tmpPUYQ9G', '268435456'] command, exit code = 0
cache size (14) is 0.00% of limit (268435456)
done.
[ 99% 40911/40912] Package OTA: /run/m...kenzo/lineage_kenzo-ota-d4b338b746.zip
unzipping target target-files...
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-Rnr8Wy
--- target info ---
blockimgdiff_versions = (str) 1,2,3,4
blocksize = (int) 131072
boot_size = (int) 67108864
build.prop = (dict) {'persist.audio.dirac.speaker': 'true', 'ro.sys.sdcardfs': 'true', 'persist.audio.fluence.speaker': 'true', 'bluetooth.hfp.client': '1', 'audio.safx.pbe.enabled': 'true', 'dalvik.vm.isa.arm.variant': 'cortex-a53.a57', 'ro.product.cpu.abilist': 'arm64-v8a,armeabi-v7a,armeabi', 'debug.enable.sglscale': '1', 'ro.build.product': 'kenzo', 'persist.data.iwlan.enable': 'true', 'ro.build.id': 'NJH47F', 'ro.hwui.gradient_cache_size': '1', 'dalvik.vm.stack-trace-file': '/data/anr/traces.txt', 'ro.product.cpu.abilist32': 'armeabi-v7a,armeabi', 'ro.build.selinux': '1', 'ro.qc.sdk.audio.fluencetype': 'fluence', 'tunnel.audio.encode': 'false', 'ro.frp.pst': '/dev/block/bootdevice/by-name/config', 'af.fast_track_multiplier': '1', 'dalvik.vm.lockprof.threshold': '500', 'ro.build.fingerprint': 'Xiaomi/kenzo/kenzo:6.0.1/MMB29M/V8.2.1.0.MHOCNDL:user/release-keys', 'ro.product.manufacturer': 'Xiaomi', 'dalvik.vm.isa.arm64.features': 'default', 'audio.offload.pcm.24bit.enable': 'false', 'persist.radio.cs_srv_type': '1', 'ro.hwui.layer_cache_size': '48', 'ro.build.description': 'kenzo-user 6.0.1 MMB29M V8.2.1.0.MHOCNDL release-keys', 'ro.bootimage.build.fingerprint': 'Xiaomi/lineage_kenzo/kenzo:7.1.2/NJH47F/d4b338b746:userdebug/test-keys', 'ro.product.cpu.abi': 'arm64-v8a', 'ro.sys.fw.dex2oat_thread_count': '4', 'ro.product.brand': 'Xiaomi', 'wifi.interface': 'wlan0', 'ro.cm.build.version.plat.sdk': '7', 'ro.product.model': 'Redmi Note 3', 'persist.radio.redir_party_num': '0', 'media.camera.ts.monotonic': '1', 'ro.cmlegal.url': 'https://lineageos.org/legal', 'persist.audio.fluence.voicecall': 'true', 'persist.cne.feature': '1', 'media.msm8956hw': '1', 'audio.offload.multiple.enabled': 'false', 'persist.demo.hdmirotationlock': 'false', 'ro.build.host': 'skynet', 'ro.build.version.security_patch': '2017-08-05', 'telephony.lteOnCdmaDevice': '1', 'media.sf.extractor-plugin': 'libffmpeg_extractor.so', 'ro.product.locale': 'en-US', 'audio.offload.min.duration.secs': '30', 'ro.btconfig.vendor': 'qcom', 'persist.audio.fluence.voicerec': 'true', 'audio.offload.video': 'false', 'dalvik.vm.isa.arm64.variant': 'generic', 'mmp.enable.3g2': 'true', 'persist.radio.NO_STAPA': '1', 'persist.hwc.downscale_threshold': '1.15', 'persist.sys.dalvik.vm.lib.2': 'libart.so', 'persist.loc.nlp_name': 'com.qualcomm.location', 'ro.board.platform': 'msm8952', 'voice.playback.conc.disabled': 'true', 'persist.data.qmi.adb_logmask': '0', 'ro.product.cpu.abilist64': 'arm64-v8a', 'audio.playback.mch.downsample': 'true', 'net.tcp.2g_init_rwnd': '10', 'ro.vendor.extension_library': 'libqti-perfd-client.so', 'persist.radio.multisim.config': 'dsds', 'persist.rild.nitz_long_ons_3': '', 'persist.rild.nitz_long_ons_2': '', 'persist.rild.nitz_long_ons_1': '', 'persist.rild.nitz_long_ons_0': '', 'ro.build.flavor': 'lineage_kenzo-userdebug', 'dalvik.vm.isa.arm.features': 'default', 'audio.deep_buffer.media': 'true', 'rild.libargs': '-d /dev/smd0', 'ro.gps.agps_provider': '1', 'persist.rild.nitz_short_ons_0': '', 'ro.build.version.release': '7.1.2', 'ro.build.version.codename': 'REL', 'DEVICE_PROVISIONED': '1', 'audio.offload.disable': '1', 'net.bt.name': 'Android', 'persist.data.netmgrd.qos.enable': 'true', 'ro.hwui.text_large_cache_width': '2048', 'persist.audio.fluence.audiorec': 'false', 'persist.radio.VT_HYBRID_ENABLE': '1', 'ro.opengles.version': '196610', 'use.voice.path.for.pcm.voip': 'true', 'persist.rild.nitz_plmn': '', 'ro.hwui.text_small_cache_height': '1024', 'ro.build.display.id': 'lineage_kenzo-userdebug 7.1.2 NJH47F d4b338b746 test-keys', 'audio.offload.pcm.16bit.enable': 'false', 'persist.radio.hw_mbn_update': '0', 'ro.config.ringtone': 'Orion.ogg', 'persist.radio.force_on_dc': 'true', 'persist.gps.qc_nlp_in_use': '1', 'debug.egl.hw': '0', 'ro.storage_manager.enabled': 'true', 'ro.carrier': 'unknown', 'ro.product.board': 'msm8952', 'ro.build.version.preview_sdk': '0', 'ro.com.google.clientidbase': 'android-xiaomi', 'persist.radio.start_ota_daemon': '1', 'ro.cm.build.version.plat.rev': '0', 'persist.timed.enable': 'true', 'ro.build.date': 'Tue Aug 22 13:26:20 IST 2017', 'ro.use_data_netmgrd': 'true', 'persist.radio.sib16_support': '1', 'qcom.bluetooth.soc': 'smd', 'ro.build.date.utc': '1503388580', 'audio.offload.buffer.size.kb': '64', 'keyguard.no_require_sim': 'true', 'ro.qc.sdk.audio.ssr': 'false', 'voice.conc.fallbackpath': 'deep-buffer', 'persist.dpm.feature': '5', 'ro.cm.display.version': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.version.all_codenames': 'REL', 'mm.enable.smoothstreaming': 'true', 'ro.btconfig.if': 'smd', 'persist.dbg.vt_avail_ovr': '1', 'dev.pm.dyn_samplingrate': '1', 'ro.build.type': 'userdebug', 'ro.hwui.text_small_cache_width': '1024', 'voice.record.conc.disabled': 'false', 'ro.cm.version': '14.1-20170822-UNOFFICIAL-kenzo', 'persist.radio.sw_mbn_update': '0', 'ro.product.name': 'lineage_kenzo', 'ro.hwui.drop_shadow_cache_size': '6', 'ro.build.version.base_os': '', 'ro.telephony.call_ring.multiple': 'false', 'voice.voip.conc.disabled': 'true', 'persist.data.mode': 'concurrent', 'media.sf.omx-plugin': 'libffmpeg_omx.so', 'ro.expect.recovery_id': '0x22ab51ee62435272df9ab420618c4be9c94727ed000000000000000000000000', 'ro.telephony.default_network': '22,20', 'ro.wifi.channels': '', 'ro.hwui.r_buffer_cache_size': '8', 'persist.camera.HAL3.enabled': '1', 'ro.modversion': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.characteristics': 'default', 'debug.mdpcomp.logs': '0', 'audio.offload.gapless.enabled': 'true', 'ro.build.version.incremental': 'd4b338b746', 'ro.config.alarm_alert': 'Hassium.ogg', 'ro.hwui.text_large_cache_height': '1024', 'rild.libpath': '/vendor/lib64/libril-qc-qmi-1.so', 'ro.build.tags': 'test-keys', 'ro.sf.lcd_density': '480', 'ro.build.version.sdk': '25', 'ro.cm.releasetype': 'UNOFFICIAL', 'audio.dolby.ds2.enabled': 'true', 'persist.audio.fluence.spk.mono': 'true', 'ril.subscription.types': 'RUIM', 'persist.dpm.nsrm.bkg.evt': '3955', 'ro.build.user': 'vinayak', 'persist.dbg.volte_avail_ovr': '1', 'ro.hwui.path_cache_size': '32', 'ro.product.device': 'kenzo', 'debug.sf.hw': '0', 'persist.rild.nitz_short_ons_1': '', 'persist.rild.nitz_short_ons_2': '', 'persist.rild.nitz_short_ons_3': '', 'persist.radio.rat_on': 'combine', 'ro.btconfig.dev': '/dev/smd3', 'ro.hwui.texture_cache_flushrate': '0.4', 'ro.hwui.texture_cache_size': '72', 'ro.cm.device': 'kenzo', 'audio_hal.period_size': '192', 'ro.btconfig.chip': 'WCN3680', 'ro.telephony.default_cdma_sub': '0', 'persist.radio.apm_sim_not_pwdn': '1', 'persist.hwc.mdpcomp.enable': 'true', 'persist.radio.custom_ecc': '1', 'persist.sys.dun.override': '0', 'ro.config.notification_sound': 'Argon.ogg', 'audio.offload.track.enable': 'false', 'media.aac_51_output_enabled': 'true'}
cache_fs_type = (str) ext4
cache_size = (int) 268435456
default_system_dev_certificate = (str) build/target/product/security/testkey
device_type = (str) MMC
extfs_sparse_flag = (str) -s
extra_recovery_keys = (str) vendor/cm/build/target/product/security/lineage
fs_type = (str) ext4
fstab = (dict) {'/cache': <common.Partition object at 0x7f2d76e445d0>, '/boot': <common.Partition object at 0x7f2d76e44050>, '/system': <common.Partition object at 0x7f2d76e44950>, '/dsp': <common.Partition object at 0x7f2d76e44210>, '/frp': <common.Partition object at 0x7f2d76e44110>, '/persist': <common.Partition object at 0x7f2d76e44810>, '/recovery': <common.Partition object at 0x7f2d76e44750>, '/firmware': <common.Partition object at 0x7f2d76e44610>, '/data': <common.Partition object at 0x7f2d76e44550>, '/misc': <common.Partition object at 0x7f2d76e44790>}
fstab_version = (int) 2
mkbootimg_args = (str) --ramdisk_offset 0x01000000 --tags_offset 0x00000100
mkbootimg_version_args = (str) --os_version 7.1.2 --os_patch_level 2017-08-05
multistage_support = (str) 1
ota_override_device = (str) kate,kenzo
recovery_api_version = (int) 3
recovery_as_boot = (str)
recovery_mount_options = (str) ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
recovery_size = (int) 67108864
selinux_fc = (str) /tmp/targetfiles-Rnr8Wy/META/file_contexts.bin
squashfs_sparse_flag = (str) -s
system_size = (int) 2684354560
tool_extensions = (str) device/xiaomi/kenzo/../common
update_rename_support = (str) 1
use_set_metadata = (str) 1
userdata_size = (int) 26838785024
unable to load device-specific module; assuming none
using prebuilt recovery.img from BOOTABLE_IMAGES...
using system.img from target-files
Total of 655360 4096-byte output blocks in 6263 input chunks.
Finding transfers...
Generating digraph...
Finding vertex sequence...
Reversing backward edges...
0/0 dependencies (0.00%) were violated; 0 source blocks stashed.
Improving vertex order...
Revising stash size...
Total 0 blocks (0 bytes) are packed as new blocks due to insufficient cache size.
Reticulating splines...
1156825088 1156825088 (100.00%) new __DATA
max stashed blocks: 0 (0 bytes), limit: 214748364 bytes (0.00%)
using prebuilt boot.img from BOOTABLE_IMAGES...
boot size (10713088) is 15.96% of limit (67108864)
running: openssl pkcs8 -in build/target/product/security/testkey.pk8 -inform DER -nocrypt
running: java -Xmx2048m -Djava.library.path=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/lib64 -jar /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/framework/signapk.jar -w build/target/product/security/testkey.x509.pem build/target/product/security/testkey.pk8 /tmp/tmpOsziEC /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage_kenzo-ota-d4b338b746.zip
done.
[100% 40912/40912] build bacon
Package Complete: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage-14.1-20170822-UNOFFICIAL-kenzo.zip
make: Leaving directory '/run/media/vinayak/6FA49F144DC575A7/android/lineage'
#### make completed successfully (04:59:23 (hh:mm:ss)) ####

Develop Bugs

welcome

[ STOCK FULL DUMP ] LGM-V300S - SW Version : 10j - LG V30 ROMs, Kernels, Recoveries, & Other Developm

Hey guys, here above a STOCK FULL DUMP of All partitions i have just created having my LGM-V300S - SW Version : 10j in hand ... LINK We can use for development and to try to find some valid Exploit...

Love to have you on board jcad. You've done amazing work in the past. If only we could root the damn carrier devices. Sent from my VS995 using Tapatalk

Can someone get me launcher apk and weather + widget apks please and share it here.

Is the Korean version of the v30 rootable with custom recovery?

Related

Looking For DEV To Help Port CWM For LG Optimus Elite

[ROM][WIP][JB][CWM][DEODEXED] XAS Stock 6.2.B.0.200 Firmware Flashable zip

Recovery enable to mount external_sd

JSS15J.I747UCUEMJ2 (Android 4.3)

Classpath error while building LineageOS

Categories

Resources