Develop Bugs

[Q] system update

Hello xda people! I just joined the forums after reading about the new system update for a while. I just wanted to know if in order for me to get the new update to 3.2.1 i need to change my GEN since i have GEN2. Or if i could just do the update manually from you guys, or if i should wait for it? Ive seen now the us is getting it, but i havent had any update at all.

from what I can tell you with my device which came with gen2 software I downgraded to the gen1 stock firmware avail in the dev section an hit update an got my 2 updates to the latest version out right now.

I see, well i downloaded one of the GEN1. I would like to know what's the process of downgrading, I'm new to all of this and don't know what to do to be honest (Even though I always catch up really fast lol). I want to downgrade so I can get the update. Thank you.

You don't need to do anything of the sort, there's a flash able GEN2 3.2.1 .zip for us GEN2 guys, you just need to download it, decrypt it using the Acer decrypt tool, put the decrypted file in the root of the SD card, turn off the device and hold volume up and power until Mr. Android with Gears shows up and automatically updates it.

Thanks, littleemp, I think I found it, though it says GEN1, the person said it works for both GEN1 and GEN2.

OSN_Voodoo said:
Thanks, littleemp, I think I found it, though it says GEN1, the person said it works for both GEN1 and GEN2.
Click to expand...
Click to collapse
Here's the encrypted update zip I used for my A100 GEN2.
www.megaupload.com/?d=EK2KP8KT

Awesome, thanks a lot!

I have a little problem with the download, I've downloaded that .zip you gave me twice already and it says the file is either unknown format or damaged. Any idea of what's happening?

Per post #4, you have to decrypt it with the decrypter tool in one of the other threads and then drop it onto the main sdcard folder. And then reboot as explained above.

Haesslich said:
Per post #4, you have to decrypt it with the decrypter tool in one of the other threads and then drop it onto the main sdcard folder. And then reboot as explained above.
Click to expand...
Click to collapse
Totally missed that, thanks a lot!

Worked perfectly, any idea if the GEN2 people will be able to get the newest? The 2.007.4 or something like that? Thanks again!

Here is a link to the gen2 decrypted file.
http://dl.dropbox.com/u/5070010/Acer Recovery File 3.2.1 Gen 2/update.zip

OSN_Voodoo said:
Worked perfectly, any idea if the GEN2 people will be able to get the newest? The 2.007.4 or something like that? Thanks again!
Click to expand...
Click to collapse
I don't even know what changes were on that update though, I thought the only really bad bug on these devices was the headphones thing.
In any case, assuming the timetable that Acer gave us for ICS holds up, then it shouldn't be very far off, so I'm just going to sit tight and wait for it.

littleemp said:
I don't even know what changes were on that update though, I thought the only really bad bug on these devices was the headphones thing.
In any case, assuming the timetable that Acer gave us for ICS holds up, then it shouldn't be very far off, so I'm just going to sit tight and wait for it.
Click to expand...
Click to collapse
Yup thats the first thing i tested as soon as i updated, it also seems to run a bit smoother now. Now to wait for ics.

full Odin package *N920AUCS4CQA1* help you up to Nougat quickly

Can not wait for the official Nougat version! Here are the latest model which I can get for you.
Not much to say，here's link for QA1, every person can flash that with Odin and then OTA to Nougat by @norbarb 's way.
Simply speaking, upgrade is divided into two steps. First flash my QA1. Then usd adb update to QC5.
Flash QA1 by Odin:
https://mega.nz/#!EFAiXTKC!S0LvpCIedF_ubVgszflUaN3U_O2zwQoeH6ku68gqnDM
QA1-QC5 Adb files from @norbarb
https://docs.google.com/uc?id=0B4sOy1rlqVoYdnROaFU4LXQybjA&export=download

Warning
Whether Odin or Adb will formate data on your phone. Please backup and then do it.

smxwang said:
Can not wait for the official Nougat version! Here are the latest model which I can get for you.
Not much to say，here's link for QA1, every person can flash that with Odin and OTA to Nougat by @norbarb 's way.
Simply speaking, upgrade is divided into three steps. First flash my QA1. Then usd adb update to QB2. Finaly using adb update to QC5.
Flash QA1:
https://mega.nz/#!EFAiXTKC!S0LvpCIedF_ubVgszflUaN3U_O2zwQoeH6ku68gqnDM
QA1-QB2:
https://forum.xda-developers.com/att...-plus-t3563086
QB2- Nougat:
https://forum.xda-developers.com/att...rvers-t3574757
Click to expand...
Click to collapse
Thanks man...great job

Is this ready for "daily driving"?

Iam on PBH4 (agaust security patch)
can i flash QA1 directly?

TeldenW said:
Is this ready for "daily driving"?
Click to expand...
Click to collapse
Working great for me as DD. Battery life is better than 6.x, but I'd expect that it'd be a little better anyway after a full wipe & fresh install.

samsung lo said:
Iam on PBH4 (agaust security patch)
can i flash QA1 directly?
Click to expand...
Click to collapse
I was on the PK1 yesterday, then I ODIN'd to PL1 (using Norbarb's instuctions and wiped my device in the process).
I then realized that since the device was already wiped, I simply ADB directly to QC5 (as it was already 1.5GB in size and should already contain the previous updates).
Battery life is now horrible, although I'm still trying to get used to the new features by turning off / disabling what I don't need. The update is worth it. as the theme makes me "feel" as though I got a new device. The touchwiz additions replace quite a number of third party apps that I'd have downloaded separately otherwise.

jaxf250 said:
Working great for me as DD. Battery life is better than 6.x, but I'd expect that it'd be a little better anyway after a full wipe & fresh install.
Click to expand...
Click to collapse
As you probably did, I'm using a non-rooted AT&T Galaxy Note 5 (N920A}. I'm familiar enough with ODIN to know that I'll probably mess it up the first try... And spend a lot of time figuring out my mistakes.
Did you have any difficulty with the update process?

TeldenW said:
As you probably did, I'm using a non-rooted AT&T Galaxy Note 5 (N920A}. I'm familiar enough with ODIN to know that I'll probably mess it up the first try... And spend a lot of time figuring out my mistakes.
Did you have any difficulty with the update process?
Click to expand...
Click to collapse
The only problem I encountered was the need to perform the large address aware fix to adb so it would sideload the S4CQB2-to-U4EQC5.zip file for me, otherwise it went fine. Just takes time. I went step by step after first backing all my stuff up. I was on an older MM release that had not been patched with any of the last 3 or 4 security patches, so I began with a complete wipe and ODIN of CPK1. Then sideloaded the rest, one at a time and switching USB debug on each time before the next update: CPK1-to-PL1, then PL1-to-CQA1, then CQA1-to-CQB2, then the final S4CQB2-to-U4EQC5. About 90 minutes maybe, a little less? I can't recall, but wasn't a big deal. It took Google longer to load my 180 apps back on at the end LOL. All the tips (like the large address fix) are in the other thread - just read it over before starting. I see we have a new update too to version QC6.... I may flash that or wait another week or two to see if more updates come out. Honestly it is running just great and I have no issues. Snappy. HTH

I will post in Nougat update thread new update to 4CQB2 to 4EQC6 firmware. Please let me know there if you want 4CQA1 to 4EQC6 update also.

jaxf250 said:
The only problem I encountered was the need to perform the large address aware fix to adb so it would sideload the S4CQB2-to-U4EQC5.zip file for me, otherwise it went fine. Just takes time. I went step by step after first backing all my stuff up. I was on an older MM release that had not been patched with any of the last 3 or 4 security patches, so I began with a complete wipe and ODIN of CPK1. Then sideloaded the rest, one at a time and switching USB debug on each time before the next update: CPK1-to-PL1, then PL1-to-CQA1, then CQA1-to-CQB2, then the final S4CQB2-to-U4EQC5. About 90 minutes maybe, a little less? I can't recall, but wasn't a big deal. It took Google longer to load my 180 apps back on at the end LOL. All the tips (like the large address fix) are in the other thread - just read it over before starting. I see we have a new update too to version QC6.... I may flash that or wait another week or two to see if more updates come out. Honestly it is running just great and I have no issues. Snappy. HTH
Click to expand...
Click to collapse
Dude, thanks man. I'm gonna do my research over the next couple days.
Good lookin' out.

norbarb said:
I will post in Nougat update thread new update to 4CQB2 to 4EQC6 firmware.
Click to expand...
Click to collapse
I just got QC5 sideloaded last night. I stayed up restoring my apps and data as close as I had it before on my PK1. This was a time-consuming process.
norbarb said:
Please let me know there if you want 4CQA1 to 4EQC6 update also.
Click to expand...
Click to collapse
You can't now just drop the QC6 on me like that so I have to go through that process all over again.
Hence I'll say "No, thank you" :highfive:

norbarb said:
I will post in Nougat update thread new update to 4CQB2 to 4EQC6 firmware. Please let me know there if you want 4CQA1 to 4EQC6 update also.
Click to expand...
Click to collapse
that's great. No matter what new model is better than elder one.

jaxf250 said:
The only problem I encountered was the need to perform the large address aware fix to adb so it would sideload the S4CQB2-to-U4EQC5.zip file for me, otherwise it went fine. Just takes time. I went step by step after first backing all my stuff up. I was on an older MM release that had not been patched with any of the last 3 or 4 security patches, so I began with a complete wipe and ODIN of CPK1. Then sideloaded the rest, one at a time and switching USB debug on each time before the next update: CPK1-to-PL1, then PL1-to-CQA1, then CQA1-to-CQB2, then the final S4CQB2-to-U4EQC5. About 90 minutes maybe, a little less? I can't recall, but wasn't a big deal. It took Google longer to load my 180 apps back on at the end LOL. All the tips (like the large address fix) are in the other thread - just read it over before starting. I see we have a new update too to version QC6.... I may flash that or wait another week or two to see if more updates come out. Honestly it is running just great and I have no issues. Snappy. HTH
Click to expand...
Click to collapse
Where did you find the QA1-to-QB2 file?

trsanning said:
Where did you find the QA1-to-QB2 file?
Click to expand...
Click to collapse
Here : http://forum.xda-developers.com/showthread.php?p=71184332
Originally from servers
Clicking from Edge of Galaxy

Help
Hello !
Please help, yesterday i try slideload with ADB from U2AOI6 to U2APB2 , i don't know how i did it, but now i have bootloop and messages " dm-verity verification failed "... " update from ADB is disabled " in downloading mode ... Is there any issue to do not loose my data. ..? If not, is the link of S4CQA1 provide here sufficient to make a full flash with odin ?

dakkidd said:
Hello !
Please help, yesterday i try slideload with ADB from U2AOI6 to U2APB2 , i don't know how i did it, but now i have bootloop and messages " dm-verity verification failed "... " update from ADB is disabled " in downloading mode ... Is there any issue to do not loose my data. ..? If not, is the link of S4CQA1 provide here sufficient to make a full flash with odin ?
Click to expand...
Click to collapse
ADB sideload always wipes after it completes
There is an app named Flashify which does not wipe after applying updates but that only works on rooted phones (and you cant root the AT&T Note 5)
Therefore no, there is (currently) no way to prevent sideload wipe

Thank you very much Dezborders!
Now it will be my first time to use Odin, pleaz can you give me the link of the more stable marshmallow for you on N920A... ?

dakkidd said:
it will be my first time to use Odin, pleaz can you give me the link of the more stable marshmallow for you on N920A... ?
Click to expand...
Click to collapse
Seriously dude!
See Page 1 Post 1 Link 1 of this thread.

dezborders said:
Seriously dude!
See Page 1 Post 1 Link 1 of this thread.
Click to expand...
Click to collapse
Lool... I have seen, but the idea was that the last update is not necessary the more stable... But ok, i'll do whith...
Thank you very much.
Sorry for my english, it's not my first speech :good:

getting "your device is corrupt and cannot be trusted pixel"

So after a few months of using my google pixel 2 xl, while I was using it I randomly got a black screen with the message:
"Your device is corrupt. It can't be trusted and may not work properly.
Visit this link on another device: g.co./ABH
PRESS POWER BUTTON TO CONTINUE".
Now it happens every time I turn on my phone. :/
I Have tried doing a factory reset and it still appears.
My phone is not rooted, I have the official OS that I got it with it (updated it through the phone's updater).
The phone was purchased directly from the us google online store.
I've tried to contact their support but they didn't have a solution.
Please help me!!

almogsad said:
So after a few months of using my google pixel 2 xl, while I was using it I randomly got a black screen with the message:
"Your device is corrupt. It can't be trusted and may not work properly.
Visit this link on another device: g.co./ABH
PRESS POWER BUTTON TO CONTINUE".
Now it happens every time I turn on my phone. :/
I Have tried doing a factory reset and it still appears.
My phone is not rooted, I have the official OS that I got it with it (updated it through the phone's updater).
The phone was purchased directly from the us google online store.
I've tried to contact their support but they didn't have a solution.
Please help me!!
Click to expand...
Click to collapse
Sounds like one of those non harmful, annoying messages at boot up. Is your bootloader still locked I assume? If so, have you tried side loading the March OTA. I think sometimes during the OTA updater process that some files don't always make it to the system, which is why you get those messages. Is your phone still functioning properly??

Badger50 said:
Sounds like one of those non harmful, annoying messages at boot up. Is your bootloader still locked I assume? If so, have you tried side loading the March OTA. I think sometimes during the OTA updater process that some files don't always make it to the system, which is why you get those messages. Is your phone still functioning properly??
Click to expand...
Click to collapse
First of all thanks for the response!
yes my bootloader is still locked.
Badger50 said:
have you tried side loading the March OTA
Click to expand...
Click to collapse
How do I do that? ^^
and it seems like the phone still functions properly, but I guess only time will tell

almogsad said:
First of all thanks for the response!
yes my bootloader is still locked.
How do I do that? ^^
and it seems like the phone still functions properly, but I guess only time will tell
Click to expand...
Click to collapse
Just follow these instructions if you want to side load an OTA. It's really not that hard ??
https://developers.google.com/android/ota

Badger50 said:
Just follow these instructions if you want to side load an OTA. It's really not that hard
Click to expand...
Click to collapse
Thanks! I'll try that...
Do you think it might fix the problem?
Edit:
it says in the guide:
"find the appropriate driver for your device from the OEM drivers"
but I don't know which one is mine ^^

almogsad said:
Thanks! I'll try that...
Do you think it might fix the problem?
Edit:
it says in the guide:
"find the appropriate driver for your device from the OEM drivers"
but I don't know which one is mine ^^
Click to expand...
Click to collapse
Once you choose the proper OS version for your pc, and install SDK, when you plug your phone in, it should automatically update your device drivers :good:
And yes, there's a good chance it'll fix your problem. Never any guarantees with this tech stuff though

Badger50 said:
Once you choose the proper OS version for your pc, and install SDK, when you plug your phone in, it should automatically update your device drivers :good:
And yes, there's a good chance it'll fix your problem. Never any guarantees with this tech stuff though
Click to expand...
Click to collapse
Hey! It seems like it worked!!!! Thanks!!
I only wish I hadn't listened to the google support team , and hadn't done a factory reset to phone before lol they don't seem to understand too much about their phones, the guy told me he thinks it's just an add
Thanks again man!

almogsad said:
Hey! It seems like it worked!!!! Thanks!!
I only wish I hadn't listened to the google support team , and hadn't done a factory reset to phone before lol they don't seem to understand too much about their phones, the guy told me he thinks it's just an add
Thanks again man!
Click to expand...
Click to collapse
Oh sweet! Glad to hear it my friend, well done. Now you can help others out with the same issue if it comes up :good: Yeah, the Google folks are kinda funny sometimes. The factory reset is their standard MO! And right, an add on the boot up screen....yeah that's funny! I'd be willing to bet most of them use iPhones!!??????

Badger50 said:
Oh sweet! Glad to hear it my friend, well done. Now you can help others out with the same issue if it comes up :good: Yeah, the Google folks are kinda funny sometimes. The factory reset is their standard MO! And right, an add on the boot up screen....yeah that's funny! I'd be willing to bet most of them use iPhones!!
Click to expand...
Click to collapse
How ironic! lol ???

Badger50 said:
Sounds like one of those non harmful, annoying messages at boot up. Is your bootloader still locked I assume? If so, have you tried side loading the March OTA. I think sometimes during the OTA updater process that some files don't always make it to the system, which is why you get those messages. Is your phone still functioning properly??
Click to expand...
Click to collapse
Thanks!! I also had this issue and following your suggestion to sideload the latest OTA, it appears to have fixed the problem.

I've been getting the same corrupt error on reboots on my xl 2(also not rooted), but I have not been able to get the latest OTA to sideload. It nearly completes but aborts last second and gives a Status 1 error. I'm not sure what I'm doing wrong here. Any help will be appreciated.
Got a similar run-around with Google support. When the factory reset was unsuccessful, they've recommended replacing the phone since it's under warranty, however they think replacing my virtually brand new phone with a refurbished phone is appropriate.

Apsel said:
I've been getting the same corrupt error on reboots on my xl 2(also not rooted), but I have not been able to get the latest OTA to sideload. It nearly completes but aborts last second and gives a Status 1 error. I'm not sure what I'm doing wrong here. Any help will be appreciated.
Got a similar run-around with Google support. When the factory reset was unsuccessful, they've recommended replacing the phone since it's under warranty, however they think replacing my virtually brand new phone with a refurbished phone is appropriate.
Click to expand...
Click to collapse
Are adb/fastboot tools the very newest?

Apsel said:
I've been getting the same corrupt error on reboots on my xl 2(also not rooted), but I have not been able to get the latest OTA to sideload. It nearly completes but aborts last second and gives a Status 1 error. I'm not sure what I'm doing wrong here. Any help will be appreciated.
Got a similar run-around with Google support. When the factory reset was unsuccessful, they've recommended replacing the phone since it's under warranty, however they think replacing my virtually brand new phone with a refurbished phone is appropriate.
Click to expand...
Click to collapse
Unlock then re-lock your bootloader(/s) maybe?

Great job guys, this solution with sideload latest OTA worked for me too with no need to unlock bootloader! :good::good::good:

I can confirm this working again. Pixel 2 XL with 9.0 and November security update.

Thanks!
I just had the corrupt message pop up (bootloader locked), and the sideload ota update seems to have worked!

michaelbsheldon said:
Are adb/fastboot tools the very newest?
Click to expand...
Click to collapse
I'm experiencing the same problem as Apsel, yes the adb/fastboot are the latest.
Error applying update: 15 (ErrorCode : kNewRootfsVerificationError)
E:Error in /sideload/package.zip (status 1)

Badger50 said:
Just follow these instructions if you want to side load an OTA. It's really not that hard ??
https://developers.google.com/android/ota
Click to expand...
Click to collapse
I know this is an old post but I'm having the same issue. Also cannot connect to pc due to, I'm assuming daughterboard issue this and previous pixel models have. I have been rooting phones since the S3 and am no virgin to the sdk. I tried to take it to ubreakifix which was a 4 hour round trip for me. I was told I would have to sign a waiver since the screen is glued to the phone and that was the only way to get to the internals. When I arrived I watched 4 bozos poke at the charging port for 20 min and then contradicting what I was told the night before over the phone that they were not comfortable doing the repair and then they tried to sell me a new device. I just got off chat with google and they want to charge me 270 dollars to fix even though I went to an authorized service center when it was in warranty. Will fastboot work over wifi?

Toolmighty said:
Will fastboot work over wifi?
Click to expand...
Click to collapse
'fraid not. Both the bootloader and recovery have stripped down hardware support, limited essentially to the display and storage. Neither has WiFi support that I know of, thus you have to use a USB cable.

I figured it out after I figured out how to fix the daughterboard issue w/o replacing the daughterboard. Verizon are some sneaky *^&$^s. Thx for the reply tho. I'm sure ur quite busy.

Ascend XT2 B130 Update and CleanRom Rom's

Well here we go
This is the First Update for the XT2 in a flashable rom​
This is for those who unlocked their bootloader and installed TWRP and can not take OTA update on their phones
As most here know ower version of TWRP is not complete and cannot decrypt the /data partition
so unfortunately you'll have to wipe your phone to install this update (sorry)
Note This also Removes TWRP and restores Stock Recovery
Flashing instructions
download and copy the Stock_B130_ XT2_H1711.zip to your ex_sdcard
copy Magisk-v16.0.zip to your ex_sdcard (just in case you need to patch the boot.img)
Boot into TWRP swipe to allow system access
Go to Settings check Use rm -fr instead of formatting
next choose Wipe / Format Data / Type "yes" to confirm
Now choose Home / Install /Select storage Micro sd /Stock_B130_ XT2_H1711.zip and Flash it (watch the flash for any Red Errors)
choose wipe cache and then reboot.
If everything went well you should be on B130 and ready to setup your phone
Huge thanks go to @m0000 for sharing his updated files
If you have any problems you'll need to reflash TWRP and Try patching the boot.img with Magisk or restore your last backup or simply flash my B120 stock rom
XT2 B130 CleanRom​
Now that you have a Stock updated phone you may want to remove all the AT&T Bloat
Here's my CleanRom that removes around 350mb of useless junk from the phone.
First you'll need to flash TWRP back to your phone from fastboot
download recoveryV3_Fixed.zip > https://androidfilehost.com/?fid=673956719939832036
and extract it to your fastboot folder
Shutdown the phone
reboot to the bootloader (power + volume down + plugged in to the PC)
and flash it from command prompt with
fastboot flash recovery recoveryV3_Fixed.img
next reboot to TWRP (power + volume up )
Now you can Download the CleanRom and copy it to your ext_sdcard from your pc.
Flashing instructions are the same as above, but you can do a dirty flash by not formatting data like above if you want to keep your current apps
Here's the list of whats removed
Apps deleted from System:
Amazon shopping
App select
Call Protect
Protect Plus
Device Help
Setup & Transfer
CricketWiFiManager
Facebook
Facebook App Installer
Facebook app manager
Gmail
Google Duo
Google Chrome
Google Drive
Google Maps
Google Play Photos
Google Play Video
Google Play Music
Google Text to Speach Engine
Ignite
Lookout
myCricket
Apps deleted from /Data/hwinit/: (If you dirty flashed these will still be on your phone)
Google Editor Slides
Google Editor Sheets
Google Editor Docs
Firefox
Apps deleted from Cust:
AT&T Remote Support
myAT&T
AT&T Hot Spots
Google Talkback
everything in the H1711z folder
The rom includes the patched boot.img from magisk v16 (it's rooted)
This will probably be the only rom I release for this phone because I don't own one.

Awesome. Thank you! So if I flash magisk after I should be able to keep my root then?

clsA said:
Huge thanks go to @m0000 for sharing his updated files
Click to expand...
Click to collapse
No thanks needed. You did all the work I only followed clear directions

freedomwarrior said:
Awesome. Thank you! So if I flash magisk after I should be able to keep my root then?
Click to expand...
Click to collapse
Yes will need to start over ( TWRP & Magisk )
Your phone will be bone stock after flashing the rom
Sent from my LG-H910 using Tapatalk

Alright. I just want to confirm that the update was successful
Out of curiosity I wanted to see if I could relock the bootloader and that finally worked too. (see screenshot) I was never able to do that before on the B120 stock rom so this is great news if I ever decide to sell the phone or just wanna get SafetyNet working correctly.
I went ahead and unlocked my bootloader again and I flashed TWRP through fastboot, Booted into TWRP and flashed magisk v16 in the OP, rebooted and I am enjoying root again with an updated phone.
Thanks again guys!

freedomwarrior said:
Alright. I just want to confirm that the update was successful
Click to expand...
Click to collapse
thanks for the update! All we need now is a @clsA CleanRom for this version

So does anybody know how hard it would be to compile lineage os 14.1 for the elate/ xt2?

903tex said:
So does anybody know how hard it would be to compile lineage os 14.1 for the elate/ xt2?
Click to expand...
Click to collapse
I have no idea but that sure would be awesome! I am guessing it would be a real pain due to the fact Huawei has not released the source code for this phone.

freedomwarrior said:
I have no idea but that sure would be awesome! I am guessing it would be a real pain due to the fact Huawei has not released the source code for this phone.
Click to expand...
Click to collapse
What about the h1611?

MaxxTwo said:
What about the h1611?
Click to expand...
Click to collapse
I am not sure. I don't own that phone.

First post updated

clsA said:
This will probably be the only rom I release for this phone because I don't own one.
Click to expand...
Click to collapse
If you need a guinea pig for future testing let me know. I have one with your CleanRom and a stock unlocked one for any and all future updates.
Thanks!

I really liked this phone, i was actually impressed. I had money to spend on a new budget phone and I was between a ZTE blade spark and this huawei.
ZTE was ok for me because a couple of years ago i bought one of their big phones but their camera sucked a lot of blur and never had focus. sometimes i even had to touch the screen again and again to make it focus, while capturing video. So i gave a shot to this Huawei, went to walmart, they wanted 89 for the phone, told them to check online because it was 69 online and they lowered me the price right away.
then used the huawei for about an hour and damn, the camera is awesome, and the LCD screen is beautiful.
I have to research on how to unlock the bootloader and pay the 5bucks to make that happen.
One thing i noticed is that altho the phone has a 16gb capacity, i was looking at the storage area and you actually end up having something like 7.3gigs free. Is that normal? most of the space is taken by the rom. Your clean rom would help a lot at least to get more space, but how come it only frees 300megs.
and thank you very much for the update. i do know how damn hard it is to update at&t gophones because those assholes only let you update the phone if you have an att simcard inserted that is also activated and you have to be with an IP that is inside USA, and have celular data ON, and sometimes even having all that.. it doesnt even update

ZeldaWW said:
I really liked this phone, i was actually impressed. I had money to spend on a new budget phone and I was between a ZTE blade spark and this huawei.
ZTE was ok for me because a couple of years ago i bought one of their big phones but their camera sucked a lot of blur and never had focus. sometimes i even had to touch the screen again and again to make it focus, while capturing video. So i gave a shot to this Huawei, went to walmart, they wanted 89 for the phone, told them to check online because it was 69 online and they lowered me the price right away.
then used the huawei for about an hour and damn, the camera is awesome, and the LCD screen is beautiful.
I have to research on how to unlock the bootloader and pay the 5bucks to make that happen.
One thing i noticed is that altho the phone has a 16gb capacity, i was looking at the storage area and you actually end up having something like 7.3gigs free. Is that normal? most of the space is taken by the rom. Your clean rom would help a lot at least to get more space, but how come it only frees 300megs.
and thank you very much for the update. i do know how damn hard it is to update at&t gophones because those assholes only let you update the phone if you have an att simcard inserted that is also activated and you have to be with an IP that is inside USA, and have celular data ON, and sometimes even having all that.. it doesnt even update
Click to expand...
Click to collapse
Instructions for DC Unlocker are here
https://r.tapatalk.com/shareLink?ur...share_tid=3780903&share_fid=3793&share_type=t
Sent from my LG-H910 using Tapatalk

@clsA
At&t is trying to push another software update to my phone. Is this the B130 we already have or a new one?

freedomwarrior said:
@clsA
At&t is trying to push another software update to my phone. Is this the B130 we already have or a new one?
Click to expand...
Click to collapse
Looks like b173
You would need to return to stock b130
To attempt the update
Sent from my LG-H910 using Tapatalk

freedomwarrior said:
@clsA
At&t is trying to push another software update to my phone. Is this the B130 we already have or a new one?
Click to expand...
Click to collapse
clsA said:
Looks like b173
You would need to return to stock b130
To attempt the update
Sent from my LG-H910 using Tapatalk
Click to expand...
Click to collapse
B130_B173_ATT is the files i sent to clsA for his b130 rom. i've not received any notification on a newer update yet.
@freedomwarrior nice dark theme btw. what are you using?
Thanks

m0000 said:
B130_B173_ATT is the files i sent to clsA for his b130 rom. i've not received any notification on a newer update yet.
@freedomwarrior nice dark theme btw. what are you using?
Thanks
Click to expand...
Click to collapse
Awe ok. That would just be att update being stupid then.
I am using Pure Dark 5.0. So far it is the best dark theme I have come across.
https://play.google.com/store/apps/details?id=sk.hanni.emuithemes.puredark

freedomwarrior said:
Awe ok. That would just be att update being stupid then.
I am using Pure Dark 5.0. So far it is the best dark theme I have come across.
https://play.google.com/store/apps/details?id=sk.hanni.emuithemes.puredark
Click to expand...
Click to collapse
Awesome, i'll check it out. Are the ads annoying? or can disable with a proper ad blocker?
Thanks

m0000 said:
Awesome, i'll check it out. Are the ads annoying? or can disable with a proper ad blocker?
Thanks
Click to expand...
Click to collapse
No ads so far that I have noticed.

Question RE : SD1A.210817.037

My device is running .036 and about a week ago the system update said there was a download. I am assuming is .037 because that is the only thing it could be...
I try to download it and it fails and it says to try again and it fails, repeat ad nauseum...
Is this ( .037 ) supposed to download ?
Ah snap, is my phone's update software broken ?
I assume this android bug will only go away with a factory reset...
Hmm...
Because fixes are cumulative, should I just wait a little bit and download December's update. I am assuming there will be a software update in December besides the security stuff.
Vote now.
Factory Reset -or- wait

You can always sideload updates using adb on a computer if the OTA is failing for you
Code:
https://dl.google.com/dl/android/aosp/raven-ota-sd1a.210817.037-1543ec70.zip
Verizon
Code:
https://dl.google.com/dl/android/aosp/raven-ota-sd1a.210817.037.a1-9436a359.zip

miravision said:
You can always sideload updates using adb on a computer if the OTA is failing for you
Code:
https://dl.google.com/dl/android/aosp/raven-ota-sd1a.210817.037-1543ec70.zip
Verizon
Code:
https://dl.google.com/dl/android/aosp/raven-ota-sd1a.210817.037.a1-9436a359.zip
Click to expand...
Click to collapse
Ug, ya I know, too many questions... lets try again...
Question: Is the .037 supposed to download ?

Yes

I would just wait. The December update was rumored to drop on the first. But even if it doesn't, it shouldn't take much longer regardless.

miravision said:
Yes
Click to expand...
Click to collapse
Because mine is failing to download, I must have a software glitch. Crap. Crap. Crap. Glitches do not magically go away...
Question 2 : Doing the sideload of the OTA after pulling it down . . . will it wipe me completely. Is there a batch switch to install-all that will NOT wipe the data area and allow me to retain my setup ?

NippleSauce said:
I would just wait. The December update was rumored to drop on the first. But even if it doesn't, it shouldn't take much longer regardless.
Click to expand...
Click to collapse
Cool ! I like that idea. Will the newer update push in front of the glitched update ?

old_fart said:
Because mine is failing to download, I must have a software glitch. Crap. Crap. Crap. Glitches do not magically go away...
Question 2 : Doing the sideload of the OTA after pulling it down . . . will it wipe me completely. Is there a batch switch to install-all that will NOT wipe the data area and allow me to retain my setup ?
Click to expand...
Click to collapse
The OTA will not wipe, no flags needed. Only the full image will wipe, unless you use the flag.
I doubt your update system is broke, I suspect you just got a bad download. Next download will be fine I think. So sideload or wait for December.

NippleSauce said:
I would just wait. The December update was rumored to drop on the first. But even if it doesn't, it shouldn't take much longer regardless.
Click to expand...
Click to collapse
Monthly updates usually occur on the 1st Monday of each month, which would be the 6th for December. Just curious, where did you hear this rumor that they were deviating from this process?

old_fart said:
My device is running .036 and about a week ago the system update said there was a download. I am assuming is
Click to expand...
Click to collapse
To be clear, are you rooted, or at least running a custom kernel? If yes to either one, you shouldn't attempt to take any automatic downloads. At worst they just won't update, such as you found out, or at worst it could break something, although still not catastrophic except maybe losing some data.
So, if you are rooted or at least using a custom kernel, you should turn off automatic updates in the Developer Options. And if you're not rooted and not using a custom kernel, then go with what everyone else said. Now if December's OTA failed to update your phone correctly and you're not rooted or using a custom kernel, then I would consider first just flashing the full factory image (whatever the most up to date at the time will be) while removing the -w (wipe) command from the flashall.bat.
Also, to complicate this reply even further, whether you're rooted or not, have you /or disabled verity and verification? If so, when you use the flashall.bat, you're going to want to put the disable verity and verification commands in place of the -w wipe command - otherwise you would *have* to wipe any time you go from either enabled to disabled, or from disabled to enabled.
Sorry for any confusion my reply may cause.

Do I need to root my phone before manually updating using the OTA file?

speedyx2000 said:
Do I need to root my phone before manually updating using the OTA file?
Click to expand...
Click to collapse
No

Lughnasadh said:
No
Click to expand...
Click to collapse
Thank you for your quick answer!

I'm starting to think 037 was pulled from the updator
I have several friends with h p6pros and only the ones who got their device early in the release received 037
I'm still on 036, however the updator no longer shows an update is available, edit: looks like Google only released 037 for select carriers

virtyx said:
I'm starting to think 037 was pulled from the updator
I have several friends with h p6pros and only the ones who got their device early in the release received 037
I'm still on 036, however the updator no longer shows an update is available, edit: looks like Google only released 037 for select carriers
Click to expand...
Click to collapse
It was America only apparently. Everyone else will get it in December as normal

From Orange France is 036, from Google store is 037

Fingerprint improvement patch was U.S. and Japan only, if you really want it sideload it, it works perfectly fine