Bootlooping - possibly bad NAND? - One (M9) Q&A, Help & Troubleshooting

So, I have a feeling I have an M9 that has suffered the dreaded dead NAND, but I want to be sure.
Phone has been working fine for long time now, no random reboots. Last night all of a sudden it just self reboots, and just stuck in a vibrate/boot screen with white background loop. I tried to get into recovery directly with Vol Down/Power but it boot loops at the silver HTC logo/black screen. The only way I can get into recovery is via fastboot while it's boot looping on the silver logo splash screen, I hold vol Up/Down and I get into fastboot. I can either choose to go to download or TWRP recovery.
Download mode screen shows
Code:
*** UNLOCKED***
htc_himauhl PVT S-OFF
CID-11111111
LK-1.0.0.0000
RADIO-01.01_U11440801_96.01.51207G_F
OpenDSP-15.6.1.00522.8994_1026.
OS-3.50.710.1
May 27 2016, 15:22:38(761596)
If I go into "System" info I can see the eMMC type and everything else.
Code:
SN: FAxxxxxxx
IMEI: xxxxxx
MEID:
eMMC: Hynix 29824MB 61079552? sectors
eMMC cid: 90014a48.42473465.xxxxxxxx.xxxxxxxxx
eMMC firmware version: : 0x7?
eMMC life[267-269]: 03 01 0b?
sbl1-1.2.50.1.3
tz-3.01.193.02
TP: Maxim-1.31.55_p8_chipID-0x78_twID-0C?
CIR: Peel - version 20
SHUB: 001.065.028.037.001.001
LCD: HIMA FHD Tianma/Renesas video mode dsi panel?
CPU: Unknown
CPU rev: 2.1
DDR: 000000001, 3GB
HOWEVER fastboot getvar all doesn't show the eMMC type - that being said my OTHER HTC M9 that works doesn't show that info - it the same as the dead M9 - even though other posts I've read suggest that because there is no eMMC info it must be dead NAND - but I can see the eMMC info in "download mode" screen.
Code:
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) serialno: FAxxxxxxxxxx
(bootloader) current-slot:
(bootloader) imei: xxxxxxxxxxxxxxxxxxxxxxxx
(bootloader) version-main: 4.23.710.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U114401011_117.00.61117G_2_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111
all:
finished. total time: 0.010s
So what I have done, went into recovery and tried to reflash custom ROM. Did not work. Had a copy of HTC RUU zip on external SD card, went into download mode and tried to flash, it begins does the pre-update flash but then when it tried to reboot into download mode to continue flashing the rest of the partitions - it gets stuck into the silver logo boot loop. So cannot flash HTC RUU. Have also tried to flash RUU using fastboot method but still same problems.
Have tried adb shell and manually mount the partitions but get "invalid argument" - which is odd, maybe because it's adb shell when in TWRP recovery.
"mount -t /dev/block/mmcblk0p067 /data"
Have reformatted the partition as ext4 with correct variables, but still cannot mount.
Have also tried a TWRP backup restore and no luck there.... it says it formats the various partitions but fails when TWRP tries to mount and fails to do the restore.
Any suggestions or ideas would be much appreciated.
Here is the output from the fastboot flash zip -it doesn't get past the preupdate stage - repeats over and over
Code:
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.50.710.1
found large-zip header, file count: 8
processing file 1/8...
sending 'zip' (172319 KB)...
OKAY [ 10.833s]
writing 'zip'...
(bootloader) HOSD CL#761596
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 12.809s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (172319 KB)...
OKAY [ 11.119s]
writing 'zip'...
(bootloader) HOSD CL#761596
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) radio.i[email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 13.093s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (172319 KB)...
OKAY [ 11.106s]
writing 'zip'...
(bootloader) HOSD CL#761596
(bootloader) GPT is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 13.091s
preupdate done, rebooting...
Have superCID, unlocked bootloader and S-OFF.

I suffer exactly the same probelems, did you resolve it? Thanks!

Is it possible that there was some update that ran yesterday an f*&ked devices up ?
I also have severe problems and i see a few more here... coincidence ?

mishumashu said:
Is it possible that there was some update that ran yesterday an f*&ked devices up ?
I also have severe problems and i see a few more here... coincidence ?
Click to expand...
Click to collapse
It's a hardware issue not a software issue. All phones by all OEMs that use the infamous SD810 are suffering from similar problems. The dead nand was quite common at the beginning of 2017. Then there were much less threads about the issue and it seems like it's getting more common, again.
@Qube-au
You didn't mention which RUU you used. In addition, it's a bit odd that you fastboot getvar shows a different firmware than your download mode. If you're actually running the 3.x firmware and used a 3.x RUU I'd suggest you to try an older RUU (e.g. a 2.x one). If it's actually running the 4.x firmware and you used the 4.x RUU you might want to contact Llabtoofer's RUU service (linked in the ReadMe thread). Unfortunately, there's no free solution in the latter case since there's no alternative 4.x RUU you could flash than the one you already tried. (I'm assuming that you checked the integrity of the RUU by looking at its MD5 checksum and that the calculated value matched the desired one.)
Nonetheless, these are only solutions in the case that you suffer from a software and not a hardware issue. Chances are high that the suggestions won't work since you might actually suffer from a bad nand.

exactly the same problem here on about the exact same day
one more to the count. Mine died two days avo. It can't be coincidence.
I'm about to buy a Nand reader to try at least to save my data.
did anybody try it?

Related

M8 GPE stuck on bootloader

Hi everybody
I have a M8 GPE unlocked/un-rooted/s-on with stock 4.4.4 and today i said that I will not wait for the OTA to come, and decided to flash it myself.
When going to recovery i saw that there is no option to adb sideload a file, strange, so I booted in TWRP (not flashed) and tried to sideload from there. I could not make the ADB sideload work in TWRP also because of some errors, and I tried the install zip option. When flashing the OTA zip I got an error saying that the required version is *4.4.4* and that i had *4.4.2*. I know for sure that I had 4.4.4 because i got the update myself and apply it automatically from within android.
Trying to do a factory reset in TWRP in order to try again the OTA zip file, i wiped the system partition (my bad) and since then i am stucked in bootloader/recovery without any way to boot into OS.
I tried to reboot into RUU and flash RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5.zip, but i get the error (probably because i am s-on):
Code:
target reported max download size of 1830617088 bytes
sending 'zip' (635732 KB)...
OKAY [ 26.906s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 99 unknown fail)
finished. total time: 27.080s
Anybody can tell if there is any way to flash the stock image on the phone?
As I understood I could do s-off only from OS, and for me that ism not possible
Thanks for the help in advance,
galiganu
Code:
platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.14.21331931.LA02_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.12.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
I just read that in order to flash back the stock rom i have to be locked, so i did fastboot oem lock. Tried to flash the RUU image and i get this:
Code:
platform-tools>fastboot flash zip RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5.zip
target reported max download size of 1830617088 bytes
sending 'zip' (635732 KB)...
OKAY [ 26.190s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 56.180s
Any ideas?
Same error as above i get with RUU-HTC_One_M8_GPE_4.4.3-2.10.1700.4.zip and RUU-HTC_One_M8_GPE_4.4.4-2.12.1700.1.zip.
hi guys, no idea about my issue?
i managed to install CM11 in the end... at least i can use the phone until i figure out how to get back to stock gpe
solution here thanks to ckpv5
http://forum.xda-developers.com/showpost.php?p=57398166&postcount=3274

HELP I REALLY NEED YOU GUYS RIGHT NOW THIS IS FOR MY HTC ONE M9 error code 21

So long story short: i tried to flash the stock rom to my htc one m9 and then this error 21 appeared and i cant find anything on xda to solve it so please all you htc one software gurus out there help me on this one and i would be really greatfull here is my fill report from what i got from fastboot
C:\Android\com>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.7 (2015-03-30)
target rom version: 2.10.401.1
found large-zip header, file count: 7
processing file 1/7...
sending 'zip' (126441 KB)...
OKAY [ 7.019s]
writing 'zip'...
(bootloader) HOSD CL#576582
(bootloader) GPT is up-to-dated. [17408]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) Update zip file OK
(bootloader) [email protected]
OKAY [ 13.058s]
finished. total time: 20.077s
processing file 2/7...
sending 'zip' (399971 KB)...
OKAY [ 24.006s]
writing 'zip'...
(bootloader) HOSD CL#576582
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) ERR SPARSE data size=-1
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) ERR inflate fail: uncompressed size(753989696) is not equal
(bootloader) total out size(753989682)
(bootloader) ERR inflate fail, zerr=-3, total_out=753989682
(bootloader) ERR zerr=-3, Z_STREAM_END=1, total_out=753989682
(bootloader) ERR [SD_UPDATE_ERR] unzip_and_update_partition: failed to u
(bootloader) nzip image or update partition[system][err 21]
(bootloader) [email protected]
(bootloader) ERR [SD_UPDATE_ERR] do_update_zip_buf: unzip_and_flash_imag
(bootloader) es fail, err 21
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 21
(bootloader) ERR Update zip file failed.
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 21
(bootloader) [email protected]
FAILED (remote: 21: fail to flash via downloadzip)
finished. total time: 32.941s
htc_fastboot finished. total time: 55.635s
C:\Android\com>
Shraggen said:
So long story short: i tried to flash the stock rom to my htc one m9 and then this error 21 appeared and i cant find anything on xda to solve it so please all you htc one software gurus out there help me on this one and i would be really greatfull here is my fill report from what i got from fastboot
Click to expand...
Click to collapse
Sounds like a file error, but I'm not a reliable guide for reading error codes. A Google search turned up some posts about this - maybe they can help.
Are you in ruu mode or download mode? Have you tried the SD card method?
Try doing it with a custom recovery on SD card. Also, you can find plenty of close to stock roms around here. Best regards
So, to summarize: you tried to flash the 2.10.401.1 RUU although there are already many posts directly under its download link that tell you that the file is corrupted. Seems like you really have guts.
If your phone doesn't boot then I think there is not much you can do since the RUU already overwrote some of the partitions. The only solution I see is trying to contact this RUU service and hope that they can fix your phone. (I'm assuming that your phone is S-ON since you didn't mention it. If it actually is S-OFF you should theoretically be able to restore your phone by using a RUU that downgrades your phone.)
Thanks to all of you guys quick messages im really thankful for that. Ive figured it out. It was really simple really i flashed the previous version and then installed the new version (2.10.401.1) with a Stock nandroid backup because if i tried to download the ota update from the prev. version it would only wipe my phone and restart

How to update HTC10 with software version 2.42.651.66 to Oreo 8.0?

Hi there people!
I have got my HTC10 running on software version 2.42.651.66 (which seems to be Sprint US edition). However I am running this device in UAE without any network issues.
Is there any way to update to Anroid 8.0 Oreo?
Would appreciate some help.
hi!
did you actually get the update?
i'm in the same scenario
cigarpill said:
hi!
did you actually get the update?
i'm in the same scenario
Click to expand...
Click to collapse
no idea how you guys use google but i just typed in "2.42.651 HTC10 RUU" and all of a sudden out of the blue i see download links
https://androidfilehost.com/?fid=457095661767153377
First link i got was this one....all sorts of ruu files
https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257
Now that's weird right !
Mr Hofs said:
no idea how you guys use google but i just typed in "2.42.651 HTC10 RUU" and all of a sudden out of the blue i see download links
https://androidfilehost.com/?fid=457095661767153377
First link i got was this one....all sorts of ruu files
https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257
Now that's weird right !
Click to expand...
Click to collapse
haha
i've seen that page, but i don't get that RUU to work
i downloaded it and it's a zip... isn't a RUU an exe?
even if i flash it like a zip throught fastboot i can't find any stock RUU for my actual firmware, in case of any error
i'm s-off but my bootloader is locked (wtf did the last user did?!), and i can't relock it...
so, i'm really lost... would you help me?
cigarpill said:
haha
i've seen that page, but i don't get that RUU to work
i downloaded it and it's a zip... isn't a RUU an exe?
even if i flash it like a zip throught fastboot i can't find any stock RUU for my actual firmware, in case of any error
i'm s-off but my bootloader is locked (wtf did the last user did?!), and i can't relock it...
so, i'm really lost... would you help me?
Click to expand...
Click to collapse
A ruu.zip is easiest flashed through download mode. Rename the ruu.zip to 2PS6IMG.zip and copy it to the SDCARD then enter download mode, the file will be automatically detected and you will be asked to flash it.
If the 2.42 ruu doesn't work pick the 2.5x ruu and do the above again.
"wtf did the user do" the user did nothing, he used sunshine and they offer the option to s-off the device and keep the status of the bootloader locked.
What is locked can't be relocked obviously, if you want unlocked status just rerun the sunshine app and change your values.
Edit : it even says there EXACTLY what to do with the ruu.zip, please pay some attention and read a bit more carefully.
Keep me posted. Cheers
This is literally written in that thread
Mr Hofs said:
A ruu.zip is easiest flashed through download mode. Rename the ruu.zip to 2PS6IMG.zip and copy it to the SDCARD then enter download mode, the file will be automatically detected and you will be asked to flash it.
If the 2.42 ruu doesn't work pick the 2.5x ruu and do the above again.
"wtf did the user do" the user did nothing, he used sunshine and they offer the option to s-off the device and keep the status of the bootloader locked.
What is locked can't be relocked obviously, if you want unlocked status just rerun the sunshine app and change your values.
Edit : it even says there EXACTLY what to do with the ruu.zip, please pay some attention and read a bit more carefully.
Keep me posted. Cheers
Click to expand...
Click to collapse
you are amazing!
look, i just have a 2gb sd card, so i just will stick to the fastboot process
right now check this:
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: :silly:
(bootloader) version-main: 2.42.651.6
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: 11111111
all:
finished. total time: 0.007s
my main goal is to have OREO on this beautiful cdma gsm htc 10 Sprint variant, let me tell you what i have done until now.
1. i went to this post and checked all my options: https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257.
2. i downloaded the very first exe showed there, which is Sprint_HTC10_3.18.651.3_RUU. i executed it but failed with an infamous 132 signature error. i read about but didn't find a solution.
3. i decided to leave any exe for the noobs, so i downloaded my exact ruu.zip, which is 2PS6IMG_2.42.651.6_RUU.zip. actually my firmware is 2.42.651.66, with and extra 6; anyway, it failed too but this time with this message on PowerShell:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
4. i moved on and downloaded this 105.1mb firmware: 2PS6IMG_Sprint_2.42.651.6_signed_firmware.zp. i flashed it twice:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 5.777s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) Perform pre-update
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 8.070s
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 6.082s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) [email protected]
OKAY [ 8.712s]
finished. total time: 14.794s
5. i was happy, now something flashed correctly so i flashed the 2PS6IMG_2.42.651.6_RUU.zip ruu again and guess what...
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip ruu.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
6. i didn't give up, so i downloaded the 100mb firmware 2PS6IMG_Sprint_3.18.651.3_signed_firmware.zip for oreo and did all the same with the ruu for oreo, same result....
7. i noticed this https://forum.xda-developers.com/showpost.php?p=67056758&postcount=4, so i proved Sneaky's fastboot. this time the previous steps became into this
C:\Android>fastboot flash zip 2PS6IMG.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
sending sparse 'zip' (8492 KB)...
OKAY [ 1.416s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_O
(bootloader) V1mhK
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 3.505s
SOOOOOO, now i'm stuck on this puzzle
i'm certainly wrong at something, and my phone isn't turning on, it's bootlooping.
what would be my next step... help me :crying:
cigarpill said:
you are amazing!
look, i just have a 2gb sd card, so i just will stick to the fastboot process
right now check this:
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno:
(bootloader) current-slot:
(bootloader) imei: :silly:
(bootloader) version-main: 2.42.651.6
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: 11111111
all:
finished. total time: 0.007s
my main goal is to have OREO on this beautiful cdma gsm htc 10 Sprint variant, let me tell you what i have done until now.
1. i went to this post and checked all my options: https://forum.xda-developers.com/sprint-htc-10/development/ruu-sprint-htc-10-1-24-651-3-t3379257.
2. i downloaded the very first exe showed there, which is Sprint_HTC10_3.18.651.3_RUU. i executed it but failed with an infamous 132 signature error. i read about but didn't find a solution.
3. i decided to leave any exe for the noobs, so i downloaded my exact ruu.zip, which is 2PS6IMG_2.42.651.6_RUU.zip. actually my firmware is 2.42.651.66, with and extra 6; anyway, it failed too but this time with this message on PowerShell:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
4. i moved on and downloaded this 105.1mb firmware: 2PS6IMG_Sprint_2.42.651.6_signed_firmware.zp. i flashed it twice:
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 5.777s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) Perform pre-update
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 8.070s
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip firmware.zip
target reported max download size of 1579200000 bytes
sending 'zip' (107623 KB)...
OKAY [ 6.082s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) get 21 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) [email protected]
OKAY [ 8.712s]
finished. total time: 14.794s
5. i was happy, now something flashed correctly so i flashed the 2PS6IMG_2.42.651.6_RUU.zip ruu again and guess what...
PS C:\zzzTuco153\HTC path\HTC10> fastboot flash zip ruu.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
6. i didn't give up, so i downloaded the 100mb firmware 2PS6IMG_Sprint_3.18.651.3_signed_firmware.zip for oreo and did all the same with the ruu for oreo, same result....
7. i noticed this https://forum.xda-developers.com/showpost.php?p=67056758&postcount=4, so i proved Sneaky's fastboot. this time the previous steps became into this
C:\Android>fastboot flash zip 2PS6IMG.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
sending sparse 'zip' (8492 KB)...
OKAY [ 1.416s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_O
(bootloader) V1mhK
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 3.505s
SOOOOOO, now i'm stuck on this puzzle
i'm certainly wrong at something, and my phone isn't turning on, it's bootlooping.
what would be my next step... help me :crying:
Click to expand...
Click to collapse
Stubborn to stay with fastboot commands......well done
But what next......
First it's needed to get into the bootloader or download mode. If you are still on the 2.42 firmware than also use that ruu (that your OS is .66 and the ruu .6 is not relevant, that's just software related and not firmware and it won't interfere the flash). Read up in one of the guides about the the topic "RUU mode" it's done via a command "fastboot oem rebootRUU" but i am not 100% sure at this time if you enter this menu via the bootloader or download menu, check that out please. At the moment i don't have the time to do searches.
If you can't get that to work i can suggest to enter download mode, flash TWRP, flash a stock based nougat rom, rerun sunshine and set all flags to s-off and unlocked bootloader instead of a locked one. In the very beginning that flag caused issues flashing kernels which they addressed later on with further development, maybe your device is has a hiccup at that level somehow.
Cheers
Mr Hofs said:
Stubborn to stay with fastboot commands......well done
But what next......
First it's needed to get into the bootloader or download mode. If you are still on the 2.42 firmware than also use that ruu (that your OS is .66 and the ruu .6 is not relevant, that's just software related and not firmware and it won't interfere the flash). Read up in one of the guides about the the topic "RUU mode" it's done via a command "fastboot oem rebootRUU" but i am not 100% sure at this time if you enter this menu via the bootloader or download menu, check that out please. At the moment i don't have the time to do searches.
If you can't get that to work i can suggest to enter download mode, flash TWRP, flash a stock based nougat rom, rerun sunshine and set all flags to s-off and unlocked bootloader instead of a locked one. In the very beginning that flag caused issues flashing kernels which they addressed later on with further development, maybe your device is has a hiccup at that level somehow.
Cheers
Click to expand...
Click to collapse
guess what????
i did it!
i flashed the 100mb oreo FIRMWARE listed on that page... then i RUUed with the first exe
i have SPRINT oreo.... but
i hate the bloatware and that hands free activation... stuff i cant use in my country even if i want
wonder, is there a way to flash the developer ruu without damaging the CDMA options? i mean, i recently found out there are 2 variants... gsm and CDMA... didnt know CDMA existed because i live in LatinAmerica. im afraid to flash another zip and lost my signal or something
thank you for your help-1
PD... i m still wondering how to unlock my bootloader, i installed sunshine apk but theres only option to reboot.
the reason why i want to unlock my bl its because in developer options i cant UNLOCK OEM as the option isnt selectable... why?
cigarpill said:
guess what????
i did it!
i flashed the 100mb oreo FIRMWARE listed on that page... then i RUUed with the first exe
i have SPRINT oreo.... but
i hate the bloatware and that hands free activation... stuff i cant use in my country even if i want
wonder, is there a way to flash the developer ruu without damaging the CDMA options? i mean, i recently found out there are 2 variants... gsm and CDMA... didnt know CDMA existed because i live in LatinAmerica. im afraid to flash another zip and lost my signal or something
thank you for your help-1
PD... i m still wondering how to unlock my bootloader, i installed sunshine apk but theres only option to reboot.
the reason why i want to unlock my bl its because in developer options i cant UNLOCK OEM as the option isnt selectable... why?
Click to expand...
Click to collapse
Sprint / GSM / CDMA conversion, don't know anything about that and i really can't help with that.
Bloatware, root the OS and delete the bloatware manually
Why do you want to change the unlock oem status in settings ?
Mr Hofs said:
Sprint / GSM / CDMA conversion, don't know anything about that and i really can't help with that.
Bloatware, root the OS and delete the bloatware manually
Why do you want to change the unlock oem status in settings ?
Click to expand...
Click to collapse
as far as i can understand
to change mid cid and flash other ruus
cigarpill said:
as far as i can understand
to change mid cid and flash other ruus
Click to expand...
Click to collapse
Nope. Oem unlock allows you to unlock the bootloader which is needed to flash TWRP and with that custom roms.
To get s-off you need to run sunshine and that requires root so the first time the device needs oem unlock enabled, unlock the bootloader, root the OS and perform sunshine to acquire s-off.
To change cid and mid you need s-off which you already have. So in a way you do not need that option enabled.
Why don't you start with the basics and read more in the sprint section to gain more knowledge and learn if sprint can even be converted in a safe way ?

HTC 10 brick and enable to apply RUU

Hi,
Previously I had a working version 2.41.401.41 with Magisk. I wanted to remove root and via twrp I applied a unmodified TWRP backup of 2.41.401.41.
But since my HTC 10 has bootloop. I tried to install customs ROMs and differnet version of RUU and TWRP backups and I still have the bootloop.
htc_fastboot.exe getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno: FA64RBN00121
(bootloader) current-slot:
(bootloader) imei: ********************
(bootloader) version-main: 2.41.401.41
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: HTC__034
Try
htc_fastboot flash zip 2PS6IMG_PERFUME[email protected]61226_79.07_F_release_509716_combined_signed_2_4.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 2.41.401.41
found large-zip header, file count: 25
processing file 1/25...
sending 'zip' (108173 KB)...
OKAY [ 5.029s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) GPT (gpt_main_32g.img) is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) WARN Skip partition_info due to unmatched partition name
(bootloader) WARN Skip backup_android-info.txt due to unmatched partitio
(bootloader) n name
(bootloader) get 34 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) dsp.[email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediatel
finished. total time: 8.309s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (108173 KB)...
OKAY [ 6.085s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) GPT (gpt_main_32g.img) is up-to-dated. [17408]
(bootloader) WARN Skip partition_info due to unmatched partition name
(bootloader) WARN Skip backup_android-info.txt due to unmatched partitio
(bootloader) n name
(bootloader) get 34 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) ERR do_firmware_update_thread: child exited with non-zero s
(bootloader) tatus: 255
(bootloader) ERR Flashing [tp_SYN3708.img] failed with status [255]
(bootloader) ERR Faild to update firmware [tp_SYN3708.img]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) ERR WRITE ERROR, 33
(bootloader) [email protected]
FAILED (remote: 33 RU_UPDATE_FIRMWARE_FAIL )
finished. total time: 22.563s
htc_fastboot finished. total time: 46.687s
If someone has an idea of the issue.
thx
Rename the ruu.zip to 2PS6IMG.zip and copy it to the sdcard and boot to download mode and flash it.
I tried with OTG mode but it failed.. I will retry with a sdcard.
Thx,
cykocator said:
I tried with OTG mode but it failed.. I will retry with a sdcard.
Thx,
Click to expand...
Click to collapse
Never works with on the go.
Not working too with sd card
I think it's a issue because /data partition is missing or corrupted.
With viper 16.0 I boot until a screen requiring the password to decrypher the content.
And in twrp I got message 'Failed to mount /data' (Invalid argument)....
cykocator said:
Not working too with sd card
I think it's a issue because /data partition is missing or corrupted.
With viper 16.0 I boot until a screen requiring the password to decrypher the content.
And in twrp I got message 'Failed to mount /data' (Invalid argument)....
Click to expand...
Click to collapse
Not working too with sdcard isn't going to cut it....whats the error, give some more info. I'm not spending time guessing what's wrong?!
cykocator said:
Hi,
Previously I had a working version 2.41.401.41 with Magisk. I wanted to remove root and via twrp I applied a unmodified TWRP backup of 2.41.401.41.
But since my HTC 10 has bootloop. I tried to install customs ROMs and differnet version of RUU and TWRP backups and I still have the bootloop.
htc_fastboot.exe getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1579200000
(bootloader) serialno: FA64RBN00121
(bootloader) current-slot:
(bootloader) imei: ********************
(bootloader) version-main: 2.41.401.41
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: HTC__034
Try
htc_fastboot flash zip 2PS6IMG_PERFUME[email protected]61226_79.07_F_release_509716_combined_signed_2_4.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 2.41.401.41
found large-zip header, file count: 25
processing file 1/25...
sending 'zip' (108173 KB)...
OKAY [ 5.029s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) GPT (gpt_main_32g.img) is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) WARN Skip partition_info due to unmatched partition name
(bootloader) WARN Skip backup_android-info.txt due to unmatched partitio
(bootloader) n name
(bootloader) get 34 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) usb[email protected]
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediatel
finished. total time: 8.309s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (108173 KB)...
OKAY [ 6.085s]
writing 'zip'...
(bootloader) HOSD CL#857212
(bootloader) GPT (gpt_main_32g.img) is up-to-dated. [17408]
(bootloader) WARN Skip partition_info due to unmatched partition name
(bootloader) WARN Skip backup_android-info.txt due to unmatched partitio
(bootloader) n name
(bootloader) get 34 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) ERR do_firmware_update_thread: child exited with non-zero s
(bootloader) tatus: 255
(bootloader) ERR Flashing [tp_SYN3708.img] failed with status [255]
(bootloader) ERR Faild to update firmware [tp_SYN3708.img]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) ERR WRITE ERROR, 33
(bootloader) [email protected]
FAILED (remote: 33 RU_UPDATE_FIRMWARE_FAIL )
finished. total time: 22.563s
htc_fastboot finished. total time: 46.687s
If someone has an idea of the issue.
thx
Click to expand...
Click to collapse
Hello. You solved? It happened to me too, I can confirm that this error occurs after replacing the display. Evidently, some non-original displays cause this error.
The only solution is to delete "tp_SYN ***. Img" from the ROM you are installing.
This causes a lot of problems.
You will no longer be able to install an RUU.exe.
Having an "s-off" helps.
Personally, to solve the problem, I have decrypted the rom.zip and I have flash system.img with fastboot. Instead for the firmware, you can download the .zip file containing only the desired firmware. Before flashing, you have to remove the "tp_SYN ***. Img" file.
I hope I was helpful. Sorry for my bad english.
Usura666 said:
Hello. You solved? It happened to me too, I can confirm that this error occurs after replacing the display. Evidently, some non-original displays cause this error.
The only solution is to delete "tp_SYN ***. Img" from the ROM you are installing.
This causes a lot of problems.
You will no longer be able to install an RUU.exe.
Having an "s-off" helps.
Personally, to solve the problem, I have decrypted the rom.zip and I have flash system.img with fastboot. Instead for the firmware, you can download the .zip file containing only the desired firmware. Before flashing, you have to remove the "tp_SYN ***. Img" file.
I hope I was helpful. Sorry for my bad english.
Click to expand...
Click to collapse
Are you serious? That's my problem! Yea I installed an aftermarket screen and that's the file I get stuck on. How do I decrypt the file to remove the tp_SYN3708.img?
Dukenukemx said:
Are you serious? That's my problem! Yea I installed an aftermarket screen and that's the file I get stuck on. How do I decrypt the file to remove the tp_SYN3708.img?
Click to expand...
Click to collapse
You can decrypt RUUs with this tool from @nkk71:
https://forum.xda-developers.com/chef-central/android/tool-universal-htc-ruu-rom-decryption-t3382928
Dukenukemx said:
Are you serious? That's my problem! Yea I installed an aftermarket screen and that's the file I get stuck on. How do I decrypt the file to remove the tp_SYN3708.img?
Click to expand...
Click to collapse
Hi, and sorry if I answer late.
Were you able to solve your problem?
Usura666 said:
Hi, and sorry if I answer late.
Were you able to solve your problem?
Click to expand...
Click to collapse
Yes, and I made a post about it. I saw a few years ago you pointed out this and that helped greatly. I thought I'd make an attempt for this info to be common knowledge.
https://forum.xda-developers.com/ht...-htc-10-to-t3953472/post80001673#post80001673
Dukenukemx said:
Are you serious? That's my problem! Yea I installed an aftermarket screen and that's the file I get stuck on. How do I decrypt the file to remove the tp_SYN3708.img?
Click to expand...
Click to collapse
This problem occurs after replacing the display, for normal RUU firmware it is enough to disassemble the phone and disconnect the display cable, then run RUU.exe on the computer and flash the board with the display turned off. I restored bricked HTC M10 Sprint 2PS6400 S-ON with locked bootloader

No radio service after battery replacement.

Hi,
After battery replacement i can't connect to network. No radio service.
I founded the correct RUU and started upload but not working.
I got this:
C:\Users\janok>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: FA78FBN01475
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 35****
(bootloader) version-main: 3.16.401.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: HTC__034
all:
finished. total time: 0.017s
C:\Users\janok>
When i try to flash the RUU with pc or SD card i got this error every time :
2PS6IMG_PERFUME_UHL_M60[email protected]_41.13_F_release_478442_signed_2_4.zip
sending 'zip'... (1764913 KB) OKAY
sending time = 70.715 secs
writing 'zip'... (bootloader) HOSD CL#1012001
(bootloader) ERR [SD_UPDATE_ERR] Main version NOT ALLOWED
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 19
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR CODE, 19
(bootloader) [email protected]
FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing or i
FAILED (remote: 19 RU_MAIN_VER_FAIL os-version in android-info missing or i)
Execution time is 74(s)
Maybe some memory chip is failed and i need to rewrite? Or its dead?
I have an access for the phone totally i can see anything and i can use with WiFi but no radio signal. (The phone know the IMEI so its not a problem. )
czifraj2 said:
Hi,
After battery replacement i can't connect to network. No radio service.
I founded the correct RUU and started upload but not working.
I got this:
C:\Users\janok>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: FA78FBN01475
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 35****
(bootloader) version-main: 3.16.401.2
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: HTC__034
all:
finished. total time: 0.017s
C:\Users\janok>
When i try to flash the RUU with pc or SD card i got this error every time :
2PS6IMG_PE[email protected]60331.4_41.13_F_release_478442_signed_2_4.zip
sending 'zip'... (1764913 KB) OKAY
sending time = 70.715 secs
writing 'zip'... (bootloader) HOSD CL#1012001
(bootloader) ERR [SD_UPDATE_ERR] Main version NOT ALLOWED
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 19
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR CODE, 19
(bootloader) [email protected]
FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing or i
FAILED (remote: 19 RU_MAIN_VER_FAIL os-version in android-info missing or i)
Execution time is 74(s)
Maybe some memory chip is failed and i need to rewrite? Or its dead?
I have an access for the phone totally i can see anything and i can use with WiFi but no radio signal. (The phone know the IMEI so its not a problem. )
Click to expand...
Click to collapse
You need to use an RUU that matches your mainversion/software version that shows in bootloader: 3.16.401.2
That old Marshmallow based RUU won't flash over a newer one, without the device being s-off.
So, try the matching RUU and it should flash fine.
Sent from my Pixel 3 XL using Tapatalk
I got the correct ruu flashed but have some issue but the radio is success but not working. Maybe the radio chip is burnout ?
C:\Android\com>htc_fastboot flash zip Rom.zip
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 3.16.401.2
found large-zip header, file count: 26
processing file 1/26...
sending 'zip' (122237 KB)...
OKAY [ 6.192s]
writing 'zip'...
(bootloader) HOSD CL#1012001
(bootloader) GPT (gpt_main_32g.img) is up-to-dated. [17408]
(bootloader) Perform pre-update
(bootloader) WARN Skip partition_info due to unmatched partition name
(bootloader) WARN Skip lockbooter.img due to unmatched partition name
(bootloader) WARN Skip backup_android-info.txt due to unmatched partitio
(bootloader) n name
(bootloader) get 34 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
FAILED (remote: 90 hboot pre-update! please flush image again immediately )
finished. total time: 10.137s
preupdate done, rebooting...
resending command...
< waiting for device >
sending 'zip' (122237 KB)...
OKAY [ 7.196s]
writing 'zip'...
(bootloader) HOSD CL#1012001
(bootloader) GPT (gpt_main_32g.img) is up-to-dated. [17408]
(bootloader) WARN Skip partition_info due to unmatched partition name
(bootloader) WARN Skip lockbooter.img due to unmatched partition name
(bootloader) WARN Skip backup_android-info.txt due to unmatched partitio
(bootloader) n name
(bootloader) get 34 images from zip(zip_type=3)
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) hosd_si[email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) [email protected]%
(bootloader) ERR do_firmware_update_thread: child exited with non-zero s
(bootloader) tatus: 255
(bootloader) ERR Flashing [tp_SYN3708.img] failed with status [255]
(bootloader) ERR Faild to update firmware [tp_SYN3708.img]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) [email protected]
(bootloader) Update zip file OK
(bootloader) ERR WRITE ERROR, 33
(bootloader) [email protected]
FAILED (remote: 33 RU_UPDATE_FIRMWARE_FAIL )
finished. total time: 66.702s
htc_fastboot finished. total time: 92.869s
C:\Android\com>

Categories

Resources