Hi, I made this post in the Sprint section a few days ago, but figured I'd post here as well to see if maybe this section has more traffic. If that's not allowed, I apologize in advance.
https://forum.xda-developers.com/sprint-htc-one-m8/help/stock-roms-t3669676
Basically, I'm looking for a stock rom for Sprint that would work with 1.54.651.8 firmware. All the links I can find on the forums seem to be dead.
Alternatively, a nandroid backup or way to extract the rom from the 1.54.651.8 RUU I do have (but won't successfully flash for whatever reason)
Any help would be appreciated. Thanks!
A custom ROM would need to support the Sprint M8, and be based on 4.4.2. Most any newer (newer than KitKat) ROMs will suffer major incompatibility with your ancient firmware, including extreme long boot time or no boot, and broken WiFi.
Suggest stocking with updating the firmware. Is the device s-on or s-off?
Problems with the RUU while "sending" are usually on the PC side. Try to re-install HTC drivers, try another USB port (USB 2.0 works best), and try another cable. Or even try another PC if possible.
Yeah I was able to find one custom 4.4.4 ROM (It was labelled 4.4.2, but it works so I guess it's close enough). There are just a few issues with it and I've always been more of a stock person anyway so I'd rather use a stock rom if I have the option.
As far as updating firmware, I am S-ON - I only originally rooted for a wifi hotspot app, so I didn't have a need to go S-OFF.
I guess it wouldn't hurt to give the RUUs a shot on a different computer. I'll just have to talk a friend into letting me install the drivers and giving it a go. One thing I'm not sure about - is it safe to go straight to the lastest RUU on HTC's site? I was willing to try it back when I had no rom at all, but now that I have a custom rom that mostly works, I'd rather not totally crap the bed.
Fuhcue said:
I guess it wouldn't hurt to give the RUUs a shot on a different computer. I'll just have to talk a friend into letting me install the drivers and giving it a go. One thing I'm not sure about - is it safe to go straight to the lastest RUU on HTC's site?
Click to expand...
Click to collapse
You can "skip" RUUs, and go the latest. However, you may (probably) need to update to the Marshmallow firmware anyway, before you can RUU. There is a strange limitation on most US version M8, where the RUU will fail with Error 155, if you try to go to Marshmallow from any former version (be it Kitkat or Lollipop) without first updating the firmware.
So the steps would be:
1) Relock bootloader
2) Flash to Marshmallow signed firmware (Sprint), in fastbootRUU mode
3) RUU to Marshmallow
4) Unlock bootloader again
5) Flash TWRP, root, and do whatever mods you want
Seeing as RUU will also wipe the phone. All this might be more than you want to do, if you are fairly happy with the phone as it is.
redpoint73 said:
Seeing as RUU will also wipe the phone. All this might be more than you want to do, if you are fairly happy with the phone as it is.
Click to expand...
Click to collapse
I don't so much mind the wipe, but I am a bit nervous about updating the firmware since that sounds like it could leave me in limbo if the RUU still didn't want to work for whatever reason. I guess I'll search around for where I can get that firmware and the procedure of how to do it and see how comfortable I feel with it in case I go that route.
If I knew for sure that it would all go through, I'd be fine with the reset. But that seems to take the attractive part of the RUU away in that it's no longer an "all in one" or one step process. (Not counting unlocking/relocking the bootloader since that's a quick and easy thing).
Fuhcue said:
I guess I'll search around for where I can get that firmware and the procedure of how to do it and see how comfortable I feel with it in case I go that route.
Click to expand...
Click to collapse
The firmware is posted in the same thread as the RUUs. And instructions on how to flash, as well.
https://forum.xda-developers.com/showthread.php?t=2729173
Fuhcue said:
If I knew for sure that it would all go through, I'd be fine with the reset. But that seems to take the attractive part of the RUU away in that it's no longer an "all in one" or one step process. (Not counting unlocking/relocking the bootloader since that's a quick and easy thing).
Click to expand...
Click to collapse
You can also opt for the Lollipop RUU (does not require flashing the firmware first). While not the latest, it's obviously more updated than what you presently have. And most of the current MM ROMs should work with LP firmware. There isn't much difference in the firmware it seems, for LP versus MM. Much different from KK to LP, which causes the problems I mentioned earlier (if you try to run KK firmware with LP or MM ROMs).
For maximum compatibility, matching the firmware is usually best. But I was running LP firmware with MM ROMs for a while (was simply to lazy to flash the MM firmware or RUU).
Ok so it sounds like the easiest option for me at this point is to grab a Lollipop RUU and try to flash it from a new computer with a fresh install of all the drivers. That way, at least if it fails to recognize my phone like the newest one did, I'll still be where I currently am with the stock (though outdated) firmware and custom rom.
Otherwise, I'll keep my fingers crossed that someone stumbles across this thread that has a meticulous archive of all old stock Sprint roms
Thanks so much for all your help and answering my questions so quickly. Much appreciated.
Hi
This is Sudheer from INDIA
i got Sprint HTC one M8 Harman Kardon from my friend.
after jail break it's supported Indian GSM sims there after only outgoing calls are working incoming calls are not working.
after so much of web search i unlock boot loader using HTC All in one and i enter into twrp wipe all system,cache and data. now its' hang on startup white screen not booting. yesterday i am trying to install os from following reference.
forum.xda-developers.com/showthread.php?t=2729173
finally i got 155 error Unsupported RUU. Please help me to come out with step by step guide because i am new for installing android phones.
Krishna Sudheer said:
after jail break it's supported Indian GSM sims there after only outgoing calls are working incoming calls are not working.
Click to expand...
Click to collapse
"Jail break" is a term specific to only iPhones. There is not such thing as "jail break" on an Android device. I assume you mean s-off, or some other mod? I can only guess, if you don't use the specific and proper terminology.
Krishna Sudheer said:
after so much of web search i unlock boot loader using HTC All in one and i enter into twrp wipe all system,cache and data. now its' hang on startup white screen not booting.
Click to expand...
Click to collapse
All in one Toolkit is obsolete, you shouldn't be using it. It contains a very old version of TWRP which will cause problems for many folks.
System partition is the OS/ROM. Should be obvious, that wiping the system partition results in no OS. Can't boot to an OS that isn't there any more. If you didn't know what the result would be from wiping a partition, you should be touching it in the first place!!!! Those options are listed under "Advanced" for a reason. If you aren't an advanced user, don't mess with them, unless you are following directions form an experienced user, or know what the result is going to be.
Krishna Sudheer said:
forum.xda-developers.com/showthread.php?t=2729173
finally i got 155 error Unsupported RUU. Please help me to come out with step by step guide because i am new for installing android phones.
Click to expand...
Click to collapse
Not enough info to know why the RUU failed. You linked a post with multiple RUUs, so we don't know which one you tried. We also don't know your current phone configuration.
Which version number RUU did you try? For HK version, you typically will need to flash the one that contains the digits "654". The RUU with digits "651" is for non-HK Sprint version. Assuming CID/MID has not been modified (which we don't know, if you don't provide more info).
Post specific info about your phone. Do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
If the phone is s-on, you need to lock it in order to RUU. I don't know if you are s-on of s--off.
You can't run a lower number (downgrade) RUU unless you have s-off. Again, I don't know what version number RUU you tried, your current version number on the phone, or whether you are s-on or s-off.
Hi Sir,
Thank you for replying. Sim Unlocked from mobile store. actually I also don't know witch method they are using to unlock. After unlocking network signals showing in GSM mode. When I am changing to LTE mode again signals disappeared. In GSM mode incoming calls are not working. SMS both incoming and outgoing working fine.
I tried to change CID and s-off but it's not working.
TWRP I used version v2.7.0.2 these recovery installed from all in one twrp (sprint). when i come back in to bootloader it will asking No OS installed are you sure you wish to reboot?
My mobile model is HTC one M8 HK (831C) Sprint Internal storage is 32GB.
I download and used to flash following files.
1. signed_6.20.654.3_firmware.zip
2.RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3.exe
3.0P6BIMG_Sprint_HTC_One_M8_Harman_6.20.654.3_RUU.zip
What was I do is
First Re-locked bootloader using with all in one and rename firmware as 0P6BIMG.ZIP then flash from SD Card Installed Successfully. Bootloader also showing OS version 6.20.654.3
Next using exe file "RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3.exe" everything going well when the process bar reaching to 100% then it's showing error 155. I Checked the error guide provide by exe file there Unsupported RUU please try again with supported RUU.
Next using with ZIP file "0P6BIMG_Sprint_HTC_One_M8_Harman_6.20.654.3_RUU.zip" flash from SD Card it will showing not enough memory but internal is full empty.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
Kindly check and do the needful. Let me know how to install OS and where witch rom I use to install.
My responses below in red font:
Krishna Sudheer said:
After unlocking network signals showing in GSM mode. When I am changing to LTE mode again signals disappeared. In GSM mode incoming calls are not working. SMS both incoming and outgoing working fine.
LTE is difficult (maybe impossible) to get working in cases where the device is not intended for your region/carrier (which I assume is the case, that you are not located in US, on the Sprint carrier). GSM should work (as you indicated) as well as 3G (HSPA) provided that your carrier uses a band(s) supported by the Sprint version M8
I tried to change CID and s-off but it's not working. I don't know what that means "it's not working". Most folks who say they have trouble with getting s-off, are trying the hopeless waste of time, which is trying to usethe long obsolete "free" s-off method of firewater. It's never going to work.
Also, you should also be careful here, when changing CID. Only use a Sprint CID, or SuperCID with a Sprint firmware/RUU. Trying to use any other firmware or RUU will result in a radio brick (possibly permanent).
TWRP I used version v2.7.0.2 these recovery installed from all in one twrp (sprint). when i come back in to bootloader it will asking No OS installed are you sure you wish to reboot? That version is too old (over 4 years) and you should have used current TWRP. This was probably caused by using the toolkit (which I mentioned is not advised anymore). Old versions of TWRP was not compatible with Sprint M8 (it had it's own "CDMA" version TWRP) and it probably caused the wrong partition to be overwritten.
What was I do is
First Re-locked bootloader using with all in one and rename firmware as 0P6BIMG.ZIP then flash from SD Card Installed Successfully. Bootloader also showing OS version 6.20.654.3 Try flashing firmware again, the number should show up in getvar all (below) under "version-main". Flashing firmware twice is usually a good idea.
Next using exe file "RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3.exe" everything going well when the process bar reaching to 100% then it's showing error 155. I Checked the error guide provide by exe file there Unsupported RUU please try again with supported RUU.
Error 155 is common, if flashing a US Marshmallow RUU, without being on the matching firmware. Flashing firmware again, as indicated above, may solve it.
Next using with ZIP file "0P6BIMG_Sprint_HTC_One_M8_Harman_6.20.654.3_RUU.zip" flash from SD Card it will showing not enough memory but internal is full empty.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: firmware number should appear here
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
Click to expand...
Click to collapse
Related
Would there be any possible way to update my firmware without unrooting my phone?
Here is my bootloader information but my main version did not seem to show up.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA43NWM05793
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 06f11f5b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
What exactly are you trying to accomplish: stock updated Marshmallow (or Lollipop?) ROM (but with root), custom ROM, etc.?
Does it read LOCKED, RELOCKED, or UNLOCKED near the top of the bootloader screen?
It reads unlocked on the bootloader
I was wanting to revert my HTC back to complete stock. But now I basically want the latest firmware. I just don't know if the main version being blank has anything to do with it where it could brick my phone.
redpoint73 said:
What exactly are you trying to accomplish: stock updated Marshmallow (or Lollipop?) ROM (but with root), custom ROM, etc.?
Does it read LOCKED, RELOCKED, or UNLOCKED near the top of the bootloader screen?
Click to expand...
Click to collapse
It reads unlocked on the bootloader
I was wanting to revert my HTC back to complete stock. But now I basically want the latest firmware. I just don't know if the main version being blank has anything to do with it where it could brick my phone.
XtreMe579 said:
now I basically want the latest firmware.
Click to expand...
Click to collapse
I think you may be confusing the term "firmware" (using it interchangeably with "ROM"). Do you want to update to stock T-Mobile Marshmallow OS, plus latest hboot, radio, etc.?
If so, one option is to run the RUU linked at the bottom of the following webpage: http://www.htc.com/us/support/htc-one-m8-t-mobile/news/
The RUU will wipe the phone, so backup anything you want to keep before RUU. Also, you'll need to root again. But really, since you are s-off and bootloader unlocked, the matter of rooting will take about 5 minutes, and should be the least of your worries.
The RUU will update you to the Marshmallow OS, including firmware (hboot, radio, etc.). From there you can just flash TWRP back onto the phone, and SuperSU 2.65 to root again.
XtreMe579 said:
I just don't know if the main version being blank has anything to do with it where it could brick my phone.
Click to expand...
Click to collapse
No, it won't. Main version being blank if very common, its a result of using certain TWRP builds, and doesn't really affect anything (aside from you not knowing what the present main version is!).
redpoint73 said:
I think you may be confusing the term "firmware" (using it interchangeably with "ROM"). Do you want to update to stock T-Mobile Marshmallow OS, plus latest hboot, radio, etc.?
If so, one option is to run the RUU linked at the bottom of the following webpage: http://www.htc.com/us/support/htc-one-m8-t-mobile/news/
The RUU will wipe the phone, so backup anything you want to keep before RUU. Also, you'll need to root again. But really, since you are s-off and bootloader unlocked, the matter of rooting will take about 5 minutes, and should be the least of your worries.
The RUU will update you to the Marshmallow OS, including firmware (hboot, radio, etc.). From there you can just flash TWRP back onto the phone, and SuperSU 2.65 to root again.
No, it won't. Main version being blank if very common, its a result of using certain TWRP builds, and doesn't really affect anything (aside from you not knowing what the present main version is!).
Click to expand...
Click to collapse
Sweet! Sounds like a piece of cake! Well I'll give it a try once I have some free time on my hands! Thank you
XtreMe579 said:
Sweet! Sounds like a piece of cake!
Click to expand...
Click to collapse
In theory, yes. Although hiccups can sometimes occur with RUU. If you have any issues, take note of any error messages, etc. and come back here and we'll troubleshoot (Error 155 is common with the MM RUUs).
redpoint73 said:
In theory, yes. Although hiccups can sometimes occur with RUU. If you have any issues, take note of any error messages, etc. and come back here and we'll troubleshoot (Error 155 is common with the MM RUUs).
Click to expand...
Click to collapse
I'll keep that in mind. Hopefully I don't get that error and everything runs smooth and dandy
redpoint73 said:
In theory, yes. Although hiccups can sometimes occur with RUU. If you have any issues, take note of any error messages, etc. and come back here and we'll troubleshoot (Error 155 is common with the MM RUUs).
Click to expand...
Click to collapse
Dang got that Error 155. Any recommendations on how to go past it?
XtreMe579 said:
Dang got that Error 155. Any recommendations on how to go past it?
Click to expand...
Click to collapse
I thought that might happen. As mentioned, its common to get this when flashing the MM RUU on a device that presently has LP firmware. What you need to do is find the 6.20.531.5 firmware (meaning a zip that contains hboot, radio, and several other modules, but not meaning a ROM or a full RUU) and flash it with fastboot. After that, the RUU should run fine with no Error 155.
I'll try to take a look and see if I can find the firmware posted (don't know off hand).
EDIT: I've been looking, and can't find the 6.20.531.5 firmware.zip. Another way to update to MM firmware, is to run the 4.20.531.4 RUU to return to "full stock" then OTA update to MM. LP RUU is here: http://forum.xda-developers.com/showthread.php?t=2714456
EDIT2: Found the 6.20.531.5 firmware: https://www.androidfilehost.com/?fid=24438995911976759
So flash this by either method in Post #1 of the following thread (under "How to Flash" or "Alternative method"): http://forum.xda-developers.com/showthread.php?t=2754063
Then run the RUU again.
Thank you! Got it to work. Did the older version RUU then OTA to MM
Hey guys,
So I believe I somehow managed to corrupt my phone or something?
I've tried several different ROMS, all to which give me an error upon installation.
The only ROM that will actually install successfully is WOLLA V7.
I've tried several other GPE based ROMS, and several TW all to which fail during install.
Could someone possibly give me an explanation to what happened, I used to be able to install any ROM now I'm stuck using WOLLA.
Here is my GETVAR ALL.
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.605.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) imei2: Not Support
(bootloader) meid: 99000499864898
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f2489bd1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.098s
I'm not quite sure what other information you guys may need in order to solve this problem of mine.
Thanks in advance for all those who leave some feedback or an explanation, I would love to find a solution!
Trytohaxme said:
(bootloader) version-main: 4.17.605.5
(bootloader) product: m8_wlv
(bootloader) modelid: 0P6B20000
[/CODE]
Click to expand...
Click to collapse
The above items indicate that you have the Verizon version M8. This version uses different kernel from other M8 versions, so you should only try ROMs specifically intended for the Verizon M8. So stick to the Verizon M8 Development section, or you can also flash ROMs from the "general" development section only if they specifically state that Verizon M8 is supported.
Also note that this has nothing to do with the actual local cell carrier you are using (folks often confuse this). The Verizon M8 is actually different in hardware, radio, partitioning, etc. from most all other M8 versions. So the reference to the Verizon version is actually referring to the device itself.
Another note of caution, I see you have the Verizon version with s-off and SuperCID; and may not be familiar with the peculiarities of the Verizon version. This combination is somewhat risky, in that you need to be sure never to flash firmware.zip or RUU from another version M8, as they are not compatible and permanent damage is possible!
redpoint73 said:
The above items indicate that you have the Verizon version M8. This version uses different kernel from other M8 versions, so you should only try ROMs specifically intended for the Verizon M8. So stick to the Verizon M8 Development section, or you can also flash ROMs from the "general" development section only if they specifically state that Verizon M8 is supported.
Also note that this has nothing to do with the actual local cell carrier you are using (folks often confuse this). The Verizon M8 is actually different in hardware, radio, partitioning, etc. from most all other M8 versions. So the reference to the Verizon version is actually referring to the device itself.
Another note of caution, I see you have the Verizon version with s-off and SuperCID; and may not be familiar with the peculiarities of the Verizon version. This combination is somewhat risky, in that you need to be sure never to flash firmware.zip or RUU from another version M8, as they are not compatible and permanent damage is possible!
Click to expand...
Click to collapse
Hmm, that may be my problem than as I did flash a new firmware package though it was primarily for international variants I believe.
Am I not able to use a RUU and get my phone back to normal now, if so can you locate the proper RUU that I would need for my model?
Trytohaxme said:
Hmm, that may be my problem than as I did flash a new firmware package though it was primarily for international variants I believe.
Am I not able to use a RUU and get my phone back to normal now, if so can you locate the proper RUU that I would need for my model?
Click to expand...
Click to collapse
The version main number 4.17.605.5 in the getvar data you posted, would indicate that you are on the Verizon firmware (the "605" is unique to Verizon). Unless you previously flashed an international firmware, then subsequently the Verizon 4.17.605.5 firmware?
In any case, it's not a bad idea to RUU back to full stock Verizon "baseline" and see if that fixes the problem. Particularly, if you think you flashed the wrong firmware before.
You can find Verizon RUUs here: https://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
Note that the US Marshmallow RUUs have a peculiar requirement, in that you need to flash the firmware (6.21.605.3) before you can flash the RUU. If you try RUU 6.21.605.3 and get an Error (155 I believe) this is the case, and you need to find and flash the firmware, then RUU. Not sure where to find the 6.21.605.3 firmware, but you might look around the M8 Verizon forum section.
redpoint73 said:
The version main number 4.17.605.5 in the getvar data you posted, would indicate that you are on the Verizon firmware (the "605" is unique to Verizon). Unless you previously flashed an international firmware, then subsequently the Verizon 4.17.605.5 firmware?
In any case, it's not a bad idea to RUU back to full stock Verizon "baseline" and see if that fixes the problem. Particularly, if you think you flashed the wrong firmware before.
You can find Verizon RUUs here: https://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
Note that the US Marshmallow RUUs have a peculiar requirement, in that you need to flash the firmware (6.21.605.3) before you can flash the RUU. If you try RUU 6.21.605.3 and get an Error (155 I believe) this is the case, and you need to find and flash the firmware, then RUU. Not sure where to find the 6.21.605.3 firmware, but you might look around the M8 Verizon forum section.
Click to expand...
Click to collapse
I honestly and truly appreciate all the help you have giving me, but I have one last question.
I believe using a RUU would be my best bet, starting from scratch is never a bad idea.
Would using a RUU fix/format any and or all partitions, cause I believe my data partition may be corrupted
Trytohaxme said:
Would using a RUU fix/format any and or all partitions, cause I believe my data partition may be corrupted
Click to expand...
Click to collapse
Yes, RUU in theory should format all partitions, and will often fix data partition corruption.
Although, if you still have TWRP installed, I would suggest booting to TWRP, and tapping the "Format data" button/option before trying the RUU. Reason being, this will often fix data corruption. And not sure, but I think in some cases I've seen RUU fail due to data corruption. So fixing it in TWRP may prevent you from having to go around in circles to get the RUU to work.
Hello, sorry for the probably completely noob question that might have already been answered but I searched for this answer and dinn't find anything really relevant.
I'd like to check the version of the unit I received so I can install a proper ROM without killing the phone as I'm aware certain versions of the M8 (GSM/CDMA) might get into troubles if wrong roms are used.
So I bought this phone from a chinese reseller. Phone is obviously refurbished (phone was rooted "out of the box" with all bloatware removed). There is a sticker on the back of the phone with 3 barcode (P/N, S/N amnd IMEI). What's strange is IMEI is similar on sticker and "about phone" but S/N doesn't match, as if it had been tampered/manually modified... So, definitely, the motherboard or the case had been replaced and I couldn't rely on the model number wirtten on the back of the phone.
First thing I tried was using the IMEI to check version but it matches an HTC Desire 820, I wasn't aware you could modify IMEI or dupe. Anyway, I moved on to the next step, which was going into bootloader. Bootloader says CID-1111111, which is, from my understanding, a way of making the phone open to any roms, from any country. Ok, one more info that doesn't help.
So I used the fastboot getvar all and it gave me this :
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.708.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC******
(bootloader) imei: 35************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B6****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I googled "0P6B6****" (it comes with the ****, I didn't replaced any digits, only hidden IMEI and S/N) and it didn't gave me any solid information. Since phone was rooted and seemingly heavily tampered, I went back to stock and possibly get OTA to get Marshmallow (current os is 4.18.708.12) but there's no more updates so I'm "stuck" with 5.0.1. I thought the phone was initially a taiwanese version since it had the Snapdragon [email protected] but there's a lot of chinese bloatware.
So I can't update to M and therefore convert the phone to GPe or even use any custom roms (unless I missed something and I'm completely wrong). Can you help me trying to figure out what I received and if there's anything I can do with it or if I'm stuck with the stock rom.
Thank you.
Your device is GSM which is good if you're not on US CDMA carrier.
0P6B6**** is SuperMID, 11111111 is SuperCID.
Depends on what you want your device to be, I suggest to change SuperMID to actual MID of your intended region.
If EU, change it to 0P6B10000, leave SuperCID as it is now then install latest Marshmallow RUU. You also can try to install RUU with SuperMID and see whether it works or not. AFAIK it should work with SuperMID.
Thank you for your quick answer. Yes, I use it in Europe so it works fine with my carrier (even if LTE B20 is missing but it's ok). I'll do as you suggested. I'm glad I got a GSM-only phone, I thought I received a hybrid unit. Thank you again.
ckpv5 said:
Your device is GSM which is good if you're not on US CDMA carrier.
0P6B6**** is SuperMID, 11111111 is SuperCID.
Depends on what you want your device to be, I suggest to change SuperMID to actual MID of your intended region.
If EU, change it to 0P6B10000, leave SuperCID as it is now then install latest Marshmallow RUU. You also can try to install RUU with SuperMID and see whether it works or not. AFAIK it should work with SuperMID.
Click to expand...
Click to collapse
Ok, so I modifed MID 0P6B10000 and then tried to install latest Marshmallow RUU 6.12.401.4 via fastboot but phone is not booting up (stuck on HTC One logo). So i restored with my previous clean Nandroid backup. I'm back to 4.18.708.12 (phone is 100% working)
First question : bootloader tells me os is 6.12.401.4 while I'm actually running 4.18.708.12. Is it a problem or not ?
Second question : in order to have a working (eu) MM rom on my phone, I guess I'm supposed to flash the firmware to the latest right (which is something I haven't done in my previous attempt to flash MM) ? But which one am I supposed to grab ? 6.12.401.4 or 6.16.708.1 ? I'll use your guide to do it (https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5). Can you confirm updating the firmware is mandatory before flashing stock MM rom when upgrading from Lollipop stock ? I can't install MM RUU, coming from LP, without flashing the fw first ?
Once firmware is updated, I can safely flash MM 6.12.401.4 ? I might as well flash to MM with TWRP and use one of your stock MM backup. Can it be done coming from my current LP rom version ?
Last question : let's say I flash the 6.12.401.4 firmware and keep the 4.18.708.12 LP rom, phone won't boot right ? Keep in mind I have a phone with a ModelID 0P6B10000 and a stock LP rom 4.18.708.12
I'm sorry for the noob questions and to bother you with these but I tried a lot of different things (and I don't want to go to fast and kill the phone) without any success, and since this is my first HTC phone, there are some novelties in the flashing process. And I recovered the phone several times so I might run out of luck next time.
Thank you again for your help.
Which RUU you tried ?
Try this - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Your bootloader now 6.12.401.4, is it written as single not double in red ? If single then it is ok
Lollipop ROM can work when firmware is MM.
Most of the time you need to install MM firmware first to install MM RUU but the above linked RUU, you don't need to.
Since your firmware already updated to 6.12.401.4 you can restore 6.12.401.4 backup available in my backup thread to have stock ROM running or install any custom ROM that you like. You don't really need to make it stock MM rom first if your plan is to install custom rom. Only you need MM firmware installed, install latest TWRP 3.x then install rom
To your last question, when you have lollipop rom running and you flash only MM firmware, it won't boot as boot.img installed now is MM and the LP rom needs LP boot.img to boot
ckpv5 said:
Which RUU you tried ?
Try this - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Your bootloader now 6.12.401.4, is it written as single not double in red ? If single then it is ok
Lollipop ROM can work when firmware is MM.
Most of the time you need to install MM firmware first to install MM RUU but the above linked RUU, you don't need to.
Since your firmware already updated to 6.12.401.4 you can restore 6.12.401.4 backup available in my backup thread to have stock ROM running or install any custom ROM that you like. You don't really need to make it stock MM rom first if your plan is to install custom rom. Only you need MM firmware installed, install latest TWRP 3.x then install rom
To your last question, when you have lollipop rom running and you flash only MM firmware, it won't boot as boot.img installed now is MM and the LP rom needs LP boot.img to boot
Click to expand...
Click to collapse
OS line is green and single so I'm good.
So if I'm understanding correctly, if OS in bootloader says 6.12.401.4, then it means firmware actually installed on phone is 6.12.401.4.
Now, when installing the RUU zip provided there (https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6), the file is corrupt, on both links. File size is correct in Windows but when I open the archive (for example to add 11111111 in android-info.txt), it says archive is corrupt and file size of the different files in this archive are way too small.
I'm gonna try Nandroid backup.
Don't do thing that is not in the instructions. No where I wrote you need to add anything to the RUU zip. It's simple process, why need to make it harder ?
RUU zip is a htc signed zip. No windows archiver such as winzip, winrar, 7-zip and etc can properly open it and you're not supposed to open it.
Read the instruction again. No need to add 11111111 to the zip as there is no such thing as SuperRUU or SuperFirmware. 11111111 is for the device which means your M8 is SuperCID and you can install the zip regardless what your device CID is.
You are absolutely right about me doing unnecessary steps. That probably explain why I didn't manage to get it working. Anyway, I used twrp to restore one the MM Nandroid backup you provided in one of your post (+ recovery) and it went smoothly. I'm now on MM and phone is working fine. I'll see if it's worth flashing a custom rom if I can find one that fits my needs.
Thank you for your answers, it did help me quite a lot. Your guides (+ all the different files you provide) are excellent, as long as you follow the instructions and don't do unnecessary steps
Have a nice day/evening.
hi,
I also have a htc m8 with modelid: 0P6B6**** and sid=1111111 which I want to use in the UK, but mine is the dual sim version of the phone
I tried following the instructions at https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
It seemed to be installing but after about 20mins it failed with the error - "(bootloader) shift signature_size for header checking...FAILED (remote: 32 header error)"
I then found another RUU which I think is the correct one but received the same error (0P6BIMG_M8_DUGL_M60_SENSE70_MR_HTC_Europe_6.16.401.1_Radio_1.24.30336021.13G_30.69.336021.00_F_release_465001_signed.zip)
btw - i tried changing the mid to 0P6B10000 but this also failed (i downloaded an app which runs in twrp to do it, is this the correct way?)
----------------- my current phone info ------------
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.30336021.13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.30.401.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC4BRY-----
(bootloader) imei: -----
(bootloader) imei2: ----
(bootloader) meid: 00000000000000
(bootloader) product: m8_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B6****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 49d38c68
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
alanes said:
I also have a htc m8 with modelid: 0P6B6**** and sid=1111111 which I want to use in the UK, but mine is the dual sim version of the phone
Click to expand...
Click to collapse
Finally you post your question in right section instead of ROM development thread.
I read all your questions before but I ignored them as they were posted in wrong section as I don't want to clutter ROM development thread with Off-Topics.
I don't think you can update your device directly to the latest Marshmallow as your current firmware is Lollipop. In order to do that you need to install Marshmallow firmware first then RUU but I don't see Marshmallow firmware is available anywhere except the RUU.
So my suggestion is install the Lollipop RUU then do OTA to Marshmallow. You may need to do 2 or 3 OTAs to reach that level.
1. No need to change anything to your MID yet. Let it be as it is now 0P6B6****
Only when the RUU fails to install due to MID error, then you need to change it to 0P6B64000 NOT 0P6B10000
https://forum.xda-developers.com/showthread.php?t=2708581
2. Download 0P6BIMG_M8_DUGL_L50_SENSE60_MR_HTC_Europe_4.30.401.15_Radio_1.24.30336021.13G_30.69.336021.00_F__signed.zip
from here - https://easy-firmware.com/home/browse/category/id/7825/
3. Install the RUU as instructed here - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
but use the above downloaded RUU
or you can rename it to 0P6BIMG.zip and place it on your microsd and boot to bootloader to install.
Make sure you don't rename it to 0P6BIMG.zip.zip
ckpv5 said:
Finally you post your question in right section instead of ROM development thread.
I read all your questions before but I ignored them as they were posted in wrong section as I don't want to clutter ROM development thread with Off-Topics.
Click to expand...
Click to collapse
Hi,
Thanks for your reply - sorry if I posted in the wrong place etc. - I struggle as I can't get the xda search to work so find it difficult to find anything.
As you know I keep giving up on this but then end up trying again and spending all night messing about with it.....
I tried installing *0P6BIMG_M8_DUGL_L50_SENSE60_MR_HTC_Europe_4.30.401.15_Radio_1.24.30336021.13G_30.69.336021.00_F__signed.zip* but get the same error.
I am not sure if this includes the firmware or if that is separate to the RUU (as I have tried to install new firmwares so the installed one may well not be the correct one).
update: I have now installed the firmware to match (i.e. a 40mb zip file version 4.30.40 1.15) but still getting the error when i try to install the RUU
btw - I tried copying to the sd card but that gives error "device halted due to large image update fail"
---------
This I think is the info from my phone when I first received it
info on my phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.18.30306251.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HC4...............
(bootloader) meid: 00000000000000
(bootloader) product: m8_dugl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B6****
(bootloader) cidnum: 11111111
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6b903f73
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks again
Alan.
I guess you need to change your MID 0P6B6**** to 0P6B64000
then try again the RUU.
I already gave you link on how to do it as in item #1
ckpv5 said:
I guess you need to change your MID 0P6B6**** to 0P6B64000
then try again the RUU.1
Click to expand...
Click to collapse
I changed the MID but then when I rebooted in to fastboot I was no longer able to connect via the fastboot command on my computer (just stayed in "waiting for device" although ADB still works ok).....
But I copied the RUU to the SD card and it installed ok
I am just doing a first boot in to android and will let you know how it goes
Thanks again for your help
Alan
---------- Post added at 08:42 AM ---------- Previous post was at 08:20 AM ----------
update: Well, a partial success
The update applied ok and I booted in to the new version of android no problem
but still when I try to use fastboot it just stays in "waiting for device" on my computer (Linux) so I am now stuck as you need fastboot to be able to install twrp.
bootloader on the phone detects when I plug the pc in with "BOOTLOADER USB". This text is highlighted in red, I think this is normal?
"htc-fastboot devices" shows nothing
btw - I have tried it on another computer and is the same
alanes said:
I changed the MID but then when I rebooted in to fastboot I was no longer able to connect via the fastboot command on my computer (just stayed in "waiting for device" although ADB still works ok).....
But I copied the RUU to the SD card and it installed ok
I am just doing a first boot in to android and will let you know how it goes
Thanks again for your help
Alan
---------- Post added at 08:42 AM ---------- Previous post was at 08:20 AM ----------
update: Well, a partial success
The update applied ok and I booted in to the new version of android no problem
but still when I try to use fastboot it just stays in "waiting for device" on my computer (Linux) so I am now stuck as you need fastboot to be able to unlock the device (i.e. fastboot oem get_identifier_token)
bootloader on the phone detects when I plug the pc in with "BOOTLOADER USB". This text is highlighted in red, I think this is normal?
btw - I have tried it on another computer and is the same
Click to expand...
Click to collapse
First thing is why did you relock bootloader. I never say you need to that because your device is S-Off
I'm not familiar with linux, never see BOOTLOADER USB, only FASTBOOT USB. Do you have access to any windows PC ?
You don't really need to do fastboot oem get_identifier_token to unlock bootloader, what you need is only a flashable TWRP zip and use adb command to unlock bootloader. Later tonight when I'm home I'll upload the flashable TWRP zip and instructions on how to unlock it.
Mean time please advise the OS no. written on bootloader so I can write the same to TWRP zip.
ckpv5 said:
First thing is why did you relock bootloader. I never say you need to that because your device is S-Off
I'm not familiar with linux, never see BOOTLOADER USB, only FASTBOOT USB. Do you have access to any windows PC ?
You don't really need to do fastboot oem get_identifier_token to unlock bootloader, what you need is only a flashable TWRP zip and use adb command to unlock bootloader. Later tonight when I'm home I'll upload the flashable TWRP zip and instructions on how to unlock it.
Mean time please advise the OS no. written on bootloader so I can write the same to TWRP zip.
Click to expand...
Click to collapse
Hi,
I had assumed it had re-locked the bootloader but later realised it was still S-off
and you are right it is "FASTBOOT USB", not "BOOTLOADER USB" - sorry for the confusion
My phone shows OS-4.30.401.15
I can use a friends Windows laptop and will see if I can give it a try
On another subject, the GPS on this phone seems to be dead (it has never seen a single satellite), is this a known problem with these phones do you happen to know?
thanks
Alan
alanes said:
My phone shows OS-4.30.401.15
Click to expand...
Click to collapse
I thought you want to update to the latest so you can install LOS14 or LOS15 or any custom ROM later.
Once you successfully back on stock 4.30.401.15, you should check for OTA and install. I believe you will have 2 or 3 OTA to get to Marshmallow firmware.
Have you check for OTA & update ?
About GPS, maybe you have faulty gps cable in it. I don't have M8 dual SIM but no reason why it is not working unless it is hardware issue. I can't help when it comes to hardware.
Read this - https://forum.xda-developers.com/htc-one-m8/general/gps-harware-fix-teardown-t3023999
ckpv5 said:
I thought you want to update to the latest so you can install LOS14 or LOS15 or any custom ROM later.
Have you check for OTA & update ?
Read this - https://forum.xda-developers.com/htc-one-m8/general/gps-harware-fix-teardown-t3023999
Click to expand...
Click to collapse
Hi,
I think you are making the mistake in thinking I have some idea what I am doing - lol
I just want to get LiniageOS 14 installed - I have never done anything like this before on my phone and this is a new phone I was not at all familiar with to start with, it has so far been a bit of a nightmare.......
thanks - I will read the link you provided and see if I can get it updated then get back to you
alanes said:
Hi,
I think you are making the mistake in thinking I have some idea what I am doing - lol
I just want to get LiniageOS 14 installed - I have never done anything like this before on my phone and this is a new phone I was not at all familiar with to start with, it has so far been a bit of a nightmare.......
thanks - I will read the link you provided and see if I can get it updated then get back to you
Click to expand...
Click to collapse
I don't make mistake as I understand what you are trying to do. If you unlock bootloader and install twrp now, you're back to earlier problem.
To install LOS 14, you must have Marshmallow firmware installed. Now you're on stock 4.30.401.15. You don't need to do unlocking & install twrp yet. You need to do OTA until you get final OTA either 6.16.401.1 or 6.16.401.101 then only you proceed to unlock bootloader and install twrp and install LOS 14.
Forget about link to GPS matter for now as that require device teardown.
Most important now OTA. Without OTA it serves no purpose on what you're doing now and intend to do later.
ok - thanks, I think I now know what I need to do (how many times have I thought that in the last few days - lol)
I Just tried fastboot on a windows laptop and it works! (no idea what is going on there - but at least I can now use it again)
it now shows modelid = 0P6B640000
BTW-I think the universe has it in for me regarding this project as apart from wanting to use LineageOS, the main reason I bought a new phone is that my existing phones GPS stopped working.........
alanes said:
ok - thanks, I think I now know what I need to do (how many times have I thought that in the last few days - lol)
I Just tried fastboot on a windows laptop and it works! (no idea what is going on there - but at least I can now use it again)
it now shows modelid = 0P6B640000
BTW-I think the universe has it in for me regarding this project as apart from wanting to use LineageOS, the main reason I bought a new phone is that my existing phones GPS stopped working.........
Click to expand...
Click to collapse
In case you're not sure what OTA I'm talking about, go to settings - about - software update - check here for OTA. When there is one, download and install. Again repeat the process until it says there is no update available.
Every time you install OTA, you OS no. on bootloader will change to current firmware. You need this until the OS no. is written as 6.16.401.1 or 6.16.401.101.
Then only you unlock bootloader and install latest twrp 3.x and install LOS 14
Two days of trying to find a solution here on xda and always banging my head in dead links and a load of information to try to understand I now have ended up with a hopefully not bricked device, I'm just stuck and need help.
This is the output of "fastboot getvar all" now.
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA4A8SF00188
(bootloader) imei: 990004997721794
(bootloader) imei2: Not Support
(bootloader) meid: 99000499772179
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This is the different lines in the output of the "fastboot getvar all" before
Code:
version-baseband: 1.12.20.1211
version-main 4.21.512.4
commitno-bootloader: 205bdca3
What I did was flashing "unsigned_firmware_6.12.401.4" and to make that work I had to change one line inside the android-info.txt from modelid: 0P6B10000 to modelid: 0P6B20000.
I'm not shure when the trouble started, and after two days of testing I don't remember all I did or not. exactly but I started to try a couple of different roms and the trying to go back to backup made by twrp "twrp-3.1.1-0-m8" there was sudden restarts and twrp got errors with carrier partition, I changed to an older twrp and got that working for a while but ten suddenly I got other errors from /cash and /data partitions when trying to whipe with twrp, tried different twrp:s trying to flash other firmwares and other roms and kernels, I'm stuck.
Now If I install lineage os, 14. .... the installation finish but with errors, I can start the phone but it will restart then and then, and if i shut it down it will not be shut down after some minutes it starts again by it self.
IF i go back to the backed up stock that I got the phone with it will do exactly the same with reboots and not being able to shut down properly.
Android version 4.4.4
HTC Sense-version 6.0
Program version 3.31.512.2
HTC SDK API level 6.25
PRI-version not available
PRL--version not available
Kernel version 3.4.g3e2305b [email protected]#1 SMP PREeMPT
Basebandvesion not available
Versionnumber 3.31.512.2 CL39569 release-keyes.
he phone is only stable in bootloader and in twrp, the twrp for the moment is 2.8.0.
Excuse me for messing up, but what shall I do now?
My goal is a working LineageOS on the phone
Edited: Oh, I forgot to tell that I prefer to use Linux when working on the phone. Somewhere I have a rarely used win10 machine also if needed.
You have a peculiar version of the M8, which is know as LRA (a Verizon variant). This is one of the "CDMA" M8 variants, which supports the Verizon LRA CDMA network (in addition to GSM, HSPA, LTE) and it differs from most other M8 versions. Therefore you can NOT flash firmware from any other version M8, such as the Euro firmware currently installed. The radio is not compatible, results in a radio brick, and that is probably why you have carrier partition errors.
Try flashing the proper RUU for LRA, and only this one: https://forum.xda-developers.com/showpost.php?p=66044439&postcount=37
I can't personally vouch for the above RUU. But I think others have verified it works on their LRA device. Hopefully, your phone boots after that, and the cell network functions. If so, you can install TWRP 3.1 (or at least 2.8.7) and a Verizon-compatible ROM. I don't know if Lineage qualifies, so I'll leave that up to you to research.
redpoint73 said:
You have a peculiar version of the M8, which is know as LRA (a Verizon variant). This is one of the "CDMA" M8 variants, which supports the Verizon LRA CDMA network (in addition to GSM, HSPA, LTE) and it differs from most other M8 versions. Therefore you can NOT flash firmware from any other version M8, such as the Euro firmware currently installed. The radio is not compatible, results in a radio brick, and that is probably why you have carrier partition errors.
Try flashing the proper RUU for LRA, and only this one: https://forum.xda-developers.com/showpost.php?p=66044439&postcount=37
I can't personally vouch for the above RUU. But I think others have verified it works on their LRA device. Hopefully, your phone boots after that, and the cell network functions. If so, you can install TWRP 3.1 (or at least 2.8.7) and a Verizon-compatible ROM. I don't know if Lineage qualifies, so I'll leave that up to you to research.
Click to expand...
Click to collapse
YEEEES thank you very much redpoint73, your answer led me to the solution. I got the phone back working
It didn't really work with the direct solution you pointed at (I don't know why), but after I red the whole thread RUU for bluegrass cellular variant I found a solution. There is a link to OTA
, I downloaded that, extracted the firmware from the zip and flashed it to my phone. Now it feel like new again. I'm not sure everything is back to normal but the version-baseband is back to where it started, the same with the version-main, but the bootloader? ie the commitno-bootloader is not changed back, will probably not only flashing firmware but so far i'ts working good. I just restored my lineageOS from previous backup.
I have wifi, radio and gps working and the lineageOS seams to work very well, maybe their version of M8 includes all versions?
Thank you again and again redpoint73
vildevilde said:
It didn't really work with the direct solution you pointed at (I don't know why), but after I red the whole thread, I downloaded that, extracted the firmware from the zip and flashed it to my phone. Now it feel like new again.
Click to expand...
Click to collapse
Not sure why the RUU didn't work, either. If the firmware from the OTA worked, the RUU should have worked. But RUU can be more finicky to things on the PC side, such as Windows version, if Visual C++ is installed, USB ports (2.0 vs. 3.0), etc. So nice job, working out a solution that worked.
vildevilde said:
I'm not sure everything is back to normal but the version-baseband is back to where it started, the same with the version-main, but the bootloader? ie the commitno-bootloader is not changed back,
Click to expand...
Click to collapse
The bootloader (3.19.0.0000) isn't different between LRA and Euro, or for that matter Lollipop versus Marshmallow. And since the firmware installed successfully, the bootloader would most likely match everything else installed by the firmware.zip (such as radio).
In other words, the bootloader number looks fine.
vildevilde said:
I just restored my lineageOS from previous backup.
I have wifi, radio and gps working and the lineageOS seams to work very well, maybe their version of M8 includes all versions?
Click to expand...
Click to collapse
I'm not a Lineage user on this device, so like I said before, I don't know either way whether it supports your LRA version M8.
If everything works on Lineage, I'd say it must support your LRA version device.
redpoint73 said:
Not sure why the RUU didn't work, either. If the firmware from the OTA worked, the RUU should have worked. But RUU can be more finicky to things on the PC side, such as Windows version, if Visual C++ is installed, USB ports (2.0 vs. 3.0), etc. So nice job, working out a solution that worked.
The bootloader (3.19.0.0000) isn't different between LRA and Euro, or for that matter Lollipop versus Marshmallow. And since the firmware installed successfully, the bootloader would most likely match everything else installed by the firmware.zip (such as radio).
In other words, the bootloader number looks fine.
I'm not a Lineage user on this device, so like I said before, I don't know either way whether it supports your LRA version M8.
If everything works on Lineage, I'd say it must support your LRA version device.
Click to expand...
Click to collapse
Yes, I'm using this as my daily phone now. Running LOS with microG support and everything works very good, easy updates every second day and no problems,
So, I had a marshmallow update on my phone, and later i converted into GPE, but didn't like it. Went back to Sense, but it just doesn't feel as good as before. One day, the battery died, and when i tried turning it on, it would give me all sorts of errors. This never happened while i was on marshmallow before conversion to GPE. Had to reset it from the recovery. I think it hasn't returned to Sense properly.
As i am S-Off, i was thinking of flashing it with a RUU which is compatible with my device. Please suggest me which is compatible.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21450002
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.16.708.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -------------------
(bootloader) imei: --------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B63000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.090s
Based on your MID, looks like you're on a GSM M8? I'd go to HTC Dev and download their stock ROM, or go the appropriate carrier sub section for the M8 and use an RUU there.
I have read here that flashing carrier RUU can brick the device radio for good. So, this is why I wanted to confirm.
cytherian said:
I'd go to HTC Dev and download their stock ROM, or go the appropriate carrier sub section for the M8 and use an RUU there.
Click to expand...
Click to collapse
HTC does not post the RUU for his version on HTC Dev.com (many versions are not posted there)
OP's version doesn't have a carrier forum sub-section.
---------- Post added at 09:38 AM ---------- Previous post was at 09:36 AM ----------
xexux said:
(bootloader) version-main: 6.16.708.1
Click to expand...
Click to collapse
I don't know if there is an RUU for this version number.
One alternative, is to restore the TWRP backup 6.16.708.1 from here: https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
---------- Post added at 09:42 AM ---------- Previous post was at 09:38 AM ----------
xexux said:
Went back to Sense, but it just doesn't feel as good as before.
I think it hasn't returned to Sense properly.
Click to expand...
Click to collapse
How exactly did you go back to Sense?
I tried the guide here, but I just couldn't complete it, as i received some modelid error. Tried multiple times to no avail. So, i tried the TWRP nandroid method, and restored to Sense that way.
xexux said:
I tried the guide here, but I just couldn't complete it, as i received some modelid error. Tried multiple times to no avail. So, i tried the TWRP nandroid method, and restored to Sense that way.
Click to expand...
Click to collapse
Good to hear that it worked out and thanks for posting. :good:
cytherian said:
Good to hear that it worked out and thanks for posting. :good:
Click to expand...
Click to collapse
This is how I got Sense back, and after that, I started experiencing bugs with M8 as explained in my first post.
xexux said:
So, i tried the TWRP nandroid method, and restored to Sense that way.
Click to expand...
Click to collapse
Which TWRP backup did you restore? Did you flash firmware, or only restore the TWRP backup?
redpoint73 said:
Which TWRP backup did you restore? Did you flash firmware, or only restore the TWRP backup?
Click to expand...
Click to collapse
I restored it with the latest TWRP backup for my model. About firmware, I am not sure, but i do see that firmware version in 'fastboot var all' data.
Since I am S-off, is there any Marshmallow RUU which i can try without bricking anything? May be a developer version or RUU for european/asian variant? Or the ones linked at gsmhosting M8 page? I have read people experiencing LTE radio problem with that. I hope that's not the case anymore, and there is a work around.
xexux said:
I restored it with the latest TWRP backup for my model.
Click to expand...
Click to collapse
What version number exactly? Perhaps you still have the files on your computer, and can look?
I've seen a number of times, folks say and think they restored the right version for their model, and once we ask for version numbers, we see they actually got it wrong.
xexux said:
About firmware, I am not sure, but i do see that firmware version in 'fastboot var all' data.
Click to expand...
Click to collapse
I can see it too. But doyou actually remember manually download and flash the firmware in RUU mode?
Did you convert to GPE using the RUU?
xexux said:
Since I am S-off, is there any Marshmallow RUU which i can try without bricking anything? May be a developer version or RUU for european/asian variant? Or the ones linked at gsmhosting M8 page? I have read people experiencing LTE radio problem with that. I hope that's not the case anymore, and there is a work around.
Click to expand...
Click to collapse
It's possible. But flashing another region's RUU will also change the radio baseband, and therefore changes the specific bands supported. It may have undesirable results (not support the 3G or LTE band or bands used by your local carrier).
My htc one m8 has no os due to an unsuccessful update, I have s-on, boot loader unlocked and not fully rooted. I have twrp as recovery. What are my options to get the official ruu to flash
Bukss said:
My htc one m8 has no os due to an unsuccessful update, I have s-on, boot loader unlocked and not fully rooted. I have twrp as recovery. What are my options to get the official ruu to flash
Click to expand...
Click to collapse
First of all, the phone won't update with TWRP installed (need stock recovery) so that is one reason for the update to fail.
Also, if the ROM is not stock (such as custom ROM, root) in any way, it needs to be returned to stock in order to update. I don't know what "not fully rooted" means. But if it was rooted, you need to re-install the stock ROM (such as stock TWRP backup) as most other "unroot" methods do not work (update will still fail).
RUU will update the phone, and bypasses the above requirements. But we would need to know more about the phone to know if your version M8 has an RUU. Do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
redpoint73 said:
First of all, the phone won't update with TWRP installed (need stock recovery) so that is one reason for the update to fail.
Also, if the ROM is not stock (such as custom ROM, root) in any way, it needs to be returned to stock in order to update. I don't know what "not fully rooted" means. But if it was rooted, you need to re-install the stock ROM (such as stock TWRP backup) as most other "unroot" methods do not work (update will still fail).
RUU will update the phone, and bypasses the above requirements. But we would need to know more about the phone to know if your version M8 has an RUU. Do fastboot getvar all, and post the results (delete IMEI and serial number before posting).
Click to expand...
Click to collapse
Hello guys. I took my M8 to someone to repair and they completely messed up the phone. Now no matter how you try to boot up the phone, a black screen with a silver HTC logo in the middle and 4 silver triangles in the corner shows up. I cannot reboot into bootloader, it brings me back to the same screen. Here is a getvar of my htc one m8, i was wondering if you could point me to the right RUU to use.
c:\miniadb_m7>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.07.1700.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 99000499834418
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 11459804
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.036s
Abnova said:
Hello guys. I took my M8 to someone to repair and they completely messed up the phone. Now no matter how you try to boot up the phone, a black screen with a silver HTC logo in the middle and 4 silver triangles in the corner shows up. I cannot reboot into bootloader, it brings me back to the same screen. Here is a getvar of my htc one m8, i was wondering if you could point me to the right RUU to use.
(bootloader) version-main: 5.07.1700.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m8_wlv
(bootloader) modelid: 0P6B12000
Click to expand...
Click to collapse
Wow, this is quite a mess!
Was this a repair shop, or just some person you knew that tried to "fix" the phone. Either way, it is probably apparent that they shouldn't be trusted, and don't seem too knowledgeable (at least with this specific device).
Although there are a few details I'm not clear on, and you should clarify:
1) If you can't get to bootloader, how did you do fastboot getvar all?
2) What exactly was wrong with the phone that the shop/person tried to "fix" for you (and the specific condition before you gave it to them)? Was it able to boot to OS? Something else wrong (no SIM, etc.)?
What is clear, is that your device is the US Verizon version M8 (as shown by the product ID m8_wlv). But at some point (not completely clear if it was the repair person, or before that) it had its MID changed to that of the US Developer's Edition (0P6B12000). And had the Google Play Edition (GPE) firmware and/or RUU installed.
Those last two things (changing to Dev Ed MID, and running GPE RUU/firmware) are a very bad idea on the Verizon version M8. Reason being, the Verizon M8 is peculiar, and can only run firmware/RUU intended for the Verizon variant M8 (so Verizon RUU or firmware). Installing any other RUU/firmware will result in a radio brick, possibly permanent. And is probably also the reason the phone won't boot to OS now. It may be fixable. But first, I'd like more information (items above) on the history of the phone, and exactly what was done to it before the repair person worked their "magic" (as much as you know).
redpoint73 said:
Wow, this is quite a mess!
Was this a repair shop, or just some person you knew that tried to "fix" the phone. Either way, it is probably apparent that they shouldn't be trusted, and don't seem too knowledgeable (at least with this specific device).
Although there are a few details I'm not clear on, and you should clarify:
1) If you can't get to bootloader, how did you do fastboot getvar all?
2) What exactly was wrong with the phone that the shop/person tried to "fix" for you (and the specific condition before you gave it to them)? Was it able to boot to OS? Something else wrong (no SIM, etc.)?
What is clear, is that your device is the US Verizon version M8 (as shown by the product ID m8_wlv). But at some point (not completely clear if it was the repair person, or before that) it had its MID changed to that of the US Developer's Edition (0P6B12000). And had the Google Play Edition (GPE) firmware and/or RUU installed.
Those last two things (changing to Dev Ed MID, and running GPE RUU/firmware) are a very bad idea on the Verizon version M8. Reason being, the Verizon M8 is peculiar, and can only run firmware/RUU intended for the Verizon variant M8 (so Verizon RUU or firmware). Installing any other RUU/firmware will result in a radio brick, possibly permanent. And is probably also the reason the phone won't boot to OS now. It may be fixable. But first, I'd like more information (items above) on the history of the phone, and exactly what was done to it before the repair person worked their "magic" (as much as you know).
Click to expand...
Click to collapse
Yeah I realised how big of a mess I was in when I got it back. Anyway
1.)On further investigation it seems like the the phone is in a wierd RUU mode. So it still can interface with the laptop through fastboot. Like I said earlier, trying to reboot to bootloader brings you to the same black screen with the silver Logo (see attached). When the phone is plugged in to the laptop or switches to the HTC silver Logo screen however when it's unplugged, it goes to a wierd bootloader like screen but black and only has the option for RUU. ( See attached)
2.) I took it to them to replace the battery because . The phone would switch off even at 100% battery. It only worked when it stayed plugged in , like a PC. I'm guessing the repair guys saw I had modified the software (I was running Dirty Unicorns, Android 7.1.2, Latest TWRP with a relocked Bootloader, S-Off) and had thought the problem actually had to do with the software. I live in Kenya and the HTC model available here is the international Gsm model so im guessing it seemed reasonable for them to RUU the Google play edition to try to bring it to a stable, stock, state. It most likely previously worked on the other M8's brought to them. I doubt they realized that I had imported the phone from the US, so they were probably shocked when it failed.
Anyway I hope this information helps. Thanks for your help.
Abnova said:
I live in Kenya and the HTC model available here is the international Gsm model so im guessing it seemed reasonable for them to RUU the Google play edition to try to bring it to a stable, stock, state. It most likely previously worked on the other M8's brought to them. I doubt they realized that I had imported the phone from the US, so they were probably shocked when it failed.
Click to expand...
Click to collapse
"Because it worked before" is not a good philosophy when working with these devices. Different models have their own nuances, for any smartphone. Any repair shop should be smart enough to know that different models/versions of the same phone can have major differences. And assuming otherwise can have catastrophic results!
Abnova said:
1.)On further investigation it seems like the the phone is in a wierd RUU mode.
Click to expand...
Click to collapse
Not a bad thing, if it is in fact RUU mode. You can try the Verizon RUUs. As mentioned, these are the only RUUs you should try on your device!
https://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
You will likely need to change back to the Verizon MID to run those RUUs. Otherwise the RUU will fail with wrong MID.
https://forum.xda-developers.com/showthread.php?t=2708581
If the phone boots to OS, but with no SIM or no signal, the repair shop flashing the wrong RUU may have bricked the radio. You can try to flash an older (Kitkat) Verizon RUU, which sometimes will fix the problem. If it does fix the radio, then you can update up to something more recent (Marshmallow).
Of course, I don't know if any of this will help your original problem of the phone shutting off when not on charger. If it is a software problem, then the original factory image (Verizon RUU) has the best chance of fixing it!
Thanks for your contribution, will definitely try tomorrow
redpoint73 said:
"Because it worked before" is not a good philosophy when working with these devices. Different models have their own nuances, for any smartphone. Any repair shop should be smart enough to know that different models/versions of the same phone can have major differences. And assuming otherwise can have catastrophic results!
Not a bad thing, if it is in fact RUU mode. You can try the Verizon RUUs. As mentioned, these are the only RUUs you should try on your device!
https://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
You will likely need to change back to the Verizon MID to run those RUUs. Otherwise the RUU will fail with wrong MID.
https://forum.xda-developers.com/showthread.php?t=2708581
If the phone boots to OS, but with no SIM or no signal, the repair shop flashing the wrong RUU may have bricked the radio. You can try to flash an older (Kitkat) Verizon RUU, which sometimes will fix the problem. If it does fix the radio, then you can update up to something more recent (Marshmallow).
Of course, I don't know if any of this will help your original problem of the phone shutting off when not on charger. If it is a software problem, then the original factory image (Verizon RUU) has the best chance of fixing it!
Click to expand...
Click to collapse
I'm having trouble changing the MID Because adb is not working. However, fastboot is. So I've been stuck and I don't know what to do
Abnova said:
I'm having trouble changing the MID Because adb is not working. However, fastboot is. So I've been stuck and I don't know what to do
Click to expand...
Click to collapse
Ah, yes. Good point. You need adb to change the MID.
Try booting TWRP custom recovery, which should give you adb access.
Download TWRP (I suggest the latest, version 3.2.1-0). Put it in the same folder as fastboot.exe
Then do command: fastboot boot twrp.img
Where "twrp.img" has to match the exact file name of what you downloaded (you can change the name of the file to twrp.img or else type the whole/exact file name as downloaded).
Hopefully, you will see TWRP boot on the phone. Once it does, you should have adb access.
I also believe you should be able to run root (su) commands in TWRP (which is necessary to change MID). But I don't remember if there is an extra step of not to that.
Basically, the repair shop really screwed you by changing the MID and flashing the wrong RUU. Extra steps/tricks to do now, but hopefully we can get some progress anyway.
redpoint73 said:
Ah, yes. Good point. You need adb to change the MID.
Try booting TWRP custom recovery, which should give you adb access.
Download TWRP (I suggest the latest, version 3.2.1-0). Put it in the same folder as fastboot.exe
Then do command: fastboot boot twrp.img
Where "twrp.img" has to match the exact file name of what you downloaded (you can change the name of the file to twrp.img or else type the whole/exact file name as downloaded).
Hopefully, you will see TWRP boot on the phone. Once it does, you should have adb access.
I also believe you should be able to run root (su) commands in TWRP (which is necessary to change MID). But I don't remember if there is an extra step of not to that.
Basically, the repair shop really screwed you by changing the MID and flashing the wrong RUU. Extra steps/tricks to do now, but hopefully we can get some progress anyway.
Click to expand...
Click to collapse
I tried that, it would flash then refuse to reboot to the recovery. I've tried so many things but none of them worked. My only hope is if someone edited the Android.txt file inside the Rom Zip so that the model ID is the same as that of my corrupt phone. That way it'll flash and hopefully fix it. I've tried myself but everytime I tried to edit it says the zip/archive is corrupt on WinRAR. I don't know whether it's a problem with my laptop or if it's a complication related to the rom.zip. I've downloaded it again but it still does the same thing. So basically I'm stuck because there is no way I can change the MID. This probably means the phone is bricked.