Related
I was so excited when I learned that the Fire TV would play XBMC (now Kodi) that I bought two units. I followed a forum guide that I lost the link to, but the guide got me to root and mod the units, install the Xposed Framework, Google Framework and Play Store, TowelRoot, SU, etc and his modded XBMC 14.0-alpha2 apk so it was set for launcher intent, and ever since, I've been pretty happily using the boxes to just stream my mkv's from my Windows SMB shares (like the WDTV boxes did that I replaced with the AFTs) but now I can't upgrade my Kodi to the latest release, and I also can no longer run the Amazon App Store from XBMC, which means I can't the Fire TV optimized apps (Facebook, Youtube, etc). Can someone recommend a way out of this mess? I want to save my paths from xbmc, but other than that, I don't have a lot of personalization on either box to care about, so I could just factor reset and start from scratch.
My needs are:
1. Need to be able to run Kodi and update whenever available
2. Need to run the Amazon App Store
3. Need to change the boot to launch into Kodi
What's my best bet? I'm very confused about what the right direction would be.
Thanks,
Jesse
jessenj said:
I was so excited when I learned that the Fire TV would play XBMC (now Kodi) that I bought two units. I followed a forum guide that I lost the link to, but the guide got me to root and mod the units, install the Xposed Framework, Google Framework and Play Store, TowelRoot, SU, etc and his modded XBMC 14.0-alpha2 apk so it was set for launcher intent, and ever since, I've been pretty happily using the boxes to just stream my mkv's from my Windows SMB shares (like the WDTV boxes did that I replaced with the AFTs) but now I can't upgrade my Kodi to the latest release, and I also can no longer run the Amazon App Store from XBMC, which means I can't the Fire TV optimized apps (Facebook, Youtube, etc). Can someone recommend a way out of this mess? I want to save my paths from xbmc, but other than that, I don't have a lot of personalization on either box to care about, so I could just factor reset and start from scratch.
My needs are:
1. Need to be able to run Kodi and update whenever available
2. Need to run the Amazon App Store
3. Need to change the boot to launch into Kodi
What's my best bet? I'm very confused about what the right direction would be.
Thanks,
Jesse
Click to expand...
Click to collapse
So what's your question? You said you rooted the device & installed Kodi etc on it.. Not sure why you are asking what direction to go with?
Unless your first paragraph is some sort of typo..
Follow this here if you need to root the device..
Update to latest rootable FW.
http://www.aftvnews.com/how-to-setup-a-new-fire-tv-without-blocking-root/
Root
http://www.aftvnews.com/how-to-root-the-amazon-fire-tv/
Block updates
http://www.aftvnews.com/how-to-block-ota-update-for-amazon-fire-tv-and-keep-root-access/
After that point, you can install the Google play store if you want, sideload Kodi apk onto the device. Use a custom launcher to load right into Kodi and bypass the default Amazon home screen. Once you do install Kodi and a launcher you can always go back to the default Amazon screen but just launching the KFTV launcher within Kodi.. So you never really lose access to it.
All that kind of info can be found here
http://wiki.xbmc.org/index.php?title=Amazon_Fire_TV
DHeffernan said:
So what's your question? You said you rooted the device & installed Kodi etc on it.. Not sure why you are asking what direction to go with?
Unless your first paragraph is some sort of typo..
Follow this here if you need to root the device..
Update to latest rootable FW.
http://www.aftvnews.com/how-to-setup-a-new-fire-tv-without-blocking-root/
Root
http://www.aftvnews.com/how-to-root-the-amazon-fire-tv/
Block updates
http://www.aftvnews.com/how-to-block-ota-update-for-amazon-fire-tv-and-keep-root-access/
After that point, you can install the Google play store if you want, sideload Kodi apk onto the device. Use a custom launcher to load right into Kodi and bypass the default Amazon home screen. Once you do install Kodi and a launcher you can always go back to the default Amazon screen but just launching the KFTV launcher within Kodi.. So you never really lose access to it.
All that kind of info can be found here
http://wiki.xbmc.org/index.php?title=Amazon_Fire_TV
Click to expand...
Click to collapse
Sorry if I was unclear. My issue is kinda buried in my first post. When I wrote "modded XBMC 14.0-alpha2 apk so it was set for launcher intent", I"m not using a straight vanilla Kodi release, but a modded apk which appears to the unit as a launcher, and thus replaced the launcher on the unit so that it would boot straight into Kodi. What I need to do is upgrade the version of XBMC/Kodi to the latest. Should I scrub my boxes back to stock and use a different method to launch Kodi without the Amazon launcher? What is the preferred method of running Kodi as a launcher? Is there an alternative launcher replacement that I should be using instead?
Thanks and sorry for the ambiguity.
Jesse
jessenj said:
Sorry if I was unclear. My issue is kinda buried in my first post. When I wrote "modded XBMC 14.0-alpha2 apk so it was set for launcher intent", I"m not using a straight vanilla Kodi release, but a modded apk which appears to the unit as a launcher, and thus replaced the launcher on the unit so that it would boot straight into Kodi. What I need to do is upgrade the version of XBMC/Kodi to the latest. Should I scrub my boxes back to stock and use a different method to launch Kodi without the Amazon launcher? What is the preferred method of running Kodi as a launcher? Is there an alternative launcher replacement that I should be using instead?
Thanks and sorry for the ambiguity.
Jesse
Click to expand...
Click to collapse
Just upgrade the current version you got using the below instructions. After that, just do the launcher mod from the wiki page I linked up top. No need to wipe your box, might as well maintain some of your XBMC config/setup.
For the cleanest launcher.. use Xposed and rbox module (Requires root). Which is described in the wiki page I linked.
XBMC can be upgraded through ADB without losing your settings. To do this, you must use a newer version of the package already installed on the machine.
Download the package to your machine
Make sure ADB is connected to the Fire TV
Run adb install -r <apk-file-name>
Installation is complete when it reports the message "Success"
XBMC will still go through the "first run" screen the first time it is launched but your settings will remain intact.
Click to expand...
Click to collapse
DHeffernan said:
Just upgrade the current version you got using the below instructions. After that, just do the launcher mod from the wiki page I linked up top. No need to wipe your box, might as well maintain some of your XBMC config/setup.
For the cleanest launcher.. use Xposed and rbox module (Requires root). Which is described in the wiki page I linked.
Click to expand...
Click to collapse
Hey guy's im haveing trouple finding 14.0 apk and above can you please help...
So I side-loaded the 14.0a3 and restored KFTV Launcher. After that, I side loaded the FiredLauncher and rbox module and now it boots straight into the updated Kodi release without losing settings so I guess this is as good as its gonna get but I'm a little confused. It looks like the KFTV launcher is still launching first before the FiredLauncher, which means KFTV is still using a ton of memory before Kodi starts. Can I prevent that from happening and boot directly to Fired?
I was wondering if anyone knows of a way to block amazon forcing you to update to latest netflix after upgrading the firmware?
Thanks to rbox I have all the necessary components to keep the file structure/firmware of 51.1.0.2 and be on latest 51.1.4.1, of course new netflix does not work on that, I removed and sideloaded an extracted netflix apk from older firmware for the FTV but amazon has something forcing you to update, it pulls up a message saying required update. Any way around this? I think the state i have my FTV in if I could launch the old netflix it would work, but I can't launch it without the amazon nag.
The reason I need to keep the old netflix is for some reason my FTV's do not play well with the new version at all, many errors/skips/fails to launch/logs me out etc. I tried latest 51.1.4.1 and still same issue. It's odd too cause I bought a new FTV from staples and rooted it and upgraded it before doing anything to 51.1.4.1 with new netflix and it works way better on that unit than any of my other ones. not sure why
Also, the new netflix will not put my FTV to sleep mode automatically after timing out. The old one would allow it to go to sleep mode while new netflix logs out of the user profile but leaves the app open and it sat overnight on netflix, This doesnt work very well for me. Any help/insight is appreciated!
Skater4599 said:
I was wondering if anyone knows of a way to block amazon forcing you to update to latest netflix after upgrading the firmware?
Thanks to rbox I have all the necessary components to keep the file structure/firmware of 51.1.0.2 and be on latest 51.1.4.1, of course new netflix does not work on that, I removed and sideloaded an extracted netflix apk from older firmware for the FTV but amazon has something forcing you to update, it pulls up a message saying required update. Any way around this? I think the state i have my FTV in if I could launch the old netflix it would work, but I can't launch it without the amazon nag.
The reason I need to keep the old netflix is for some reason my FTV's do not play well with the new version at all, many errors/skips/fails to launch/logs me out etc. I tried latest 51.1.4.1 and still same issue. It's odd too cause I bought a new FTV from staples and rooted it and upgraded it before doing anything to 51.1.4.1 with new netflix and it works way better on that unit than any of my other ones. not sure why
Also, the new netflix will not put my FTV to sleep mode automatically after timing out. The old one would allow it to go to sleep mode while new netflix logs out of the user profile but leaves the app open and it sat overnight on netflix, This doesnt work very well for me. Any help/insight is appreciated!
Click to expand...
Click to collapse
It's two separate apps, so if you leave the new one installed, the old one will still work. Unfortunately it won't show up in the main apps list and you'll have to open it like other sideloaded apps.
rbox said:
It's two separate apps, so if you leave the new one installed, the old one will still work. Unfortunately it won't show up in the main apps list and you'll have to open it like other sideloaded apps.
Click to expand...
Click to collapse
Just tried that, it does show up as a seperate as you said, the problem is when I launch it, I get an amazon popup that says "Launch newer Netflix Instead. you have installed a newer version of Netflix. This old version is no longer supported. Please uninstall and launch the new version instead. And two options, uninstall now or uninstall later"
Also looking at manage all apps list now it only shows the old netflix, I think it overwrote the newer version or something.
Skater4599 said:
Just tried that, it does show up as a seperate as you said, the problem is when I launch it, I get an amazon popup that says "Launch newer Netflix Instead. you have installed a newer version of Netflix. This old version is no longer supported. Please uninstall and launch the new version instead. And two options, uninstall now or uninstall later"
Also looking at manage all apps list now it only shows the old netflix, I think it overwrote the newer version or something.
Click to expand...
Click to collapse
That's odd. Originally, before I fixed Netflix... I let it update to the new Netflix, I used it and it didn't work, and then I did 'adb install' to install the old one, and went to the apps list and it "just worked". It could be that they've since updated something to prevent that from working... Why not just flash 51.1.3.0?
rbox said:
That's odd. Originally, before I fixed Netflix... I let it update to the new Netflix, I used it and it didn't work, and then I did 'adb install' to install the old one, and went to the apps list and it "just worked". It could be that they've since updated something to prevent that from working... Why not just flash 51.1.3.0?
Click to expand...
Click to collapse
My other FTV's are on 51.1.3.0 for that reason, I had just flahsed this one with latest 51.1.4.1 in hopes new netflix would work any better than it did on 51.1.4.0, but it seems not much changed (for me). I wanted to keep the new firmware for some of the features, remote on phone, sleep button, prime music and whatever bug fixes etc they've done in the background, also moving forward I don't want to be forever stuck on 51.1.3.0. But it'll have to do for now I guess.
@rbox do you still happen to have the APK you adb installed that showed up seperately? I wonder if it's just my .apk I have
Skater4599 said:
@rbox do you still happen to have the APK you adb installed that showed up seperately? I wonder if it's just my .apk I have
Click to expand...
Click to collapse
It's the same one you have, it hasn't been chagned in forever. Just pull it off one of your other boxes.
Ok, yep same place I got the one I have. I just re-pulled it and the /data/data folder just to see, same thing.
Thanks for the help/input rbox
I hope this is the right thread for this -
I just updated to the pre-rooted 51.1.4.1_514013920 firmware. The new netflix app won't play anything. I tried uninstalling it, deleting it from the cloud, rebooting, and reinstalling. Still nothing.
Any ideas? I was fine with the old app if someone could point me to the APK. I unforunately don't have any other devices with the old APK.
I appreciate any help.
---------- Post added at 11:08 PM ---------- Previous post was at 10:15 PM ----------
sjwaste said:
I hope this is the right thread for this -
I just updated to the pre-rooted 51.1.4.1_514013920 firmware. The new netflix app won't play anything. I tried uninstalling it, deleting it from the cloud, rebooting, and reinstalling. Still nothing.
Any ideas? I was fine with the old app if someone could point me to the APK. I unforunately don't have any other devices with the old APK.
I appreciate any help.
Click to expand...
Click to collapse
Nevermind. I ended up wiping and installing 51.1.4.0 because I don't think I ever did that. Then I reinstalled the boot menu and flashed .1 and everything is working.
I'll leave this here just in case anyone else makes the same bonehead mistake. Thanks for the hard work rbox, appreciate the rooted firmware releases.
I have OTA updates blocked since day 1 using debloater tool. Device is at OS 5.0.51 (537175520). Everything (Netflix, Kodi, Amazon Prime) was working great for more than a year.
Recently can't play any Amazon Prime content even though I'm signed into my Prime account. It does show recently viewed in list from other devices (phone, other smart tv). Clicking on a video spins the icon a few seconds and then takes you right back to your personalized Prime content page. So the program isn't crashing just not allowing streaming anymore.
Tried rebooting, force stop application, clearing cache. Any other suggestions or do I have to reset to default settings? Will restoring allow Amazon updates and remove Kodi?
Go easy I'm only tech savvy enough to get into trouble
Thanks.
Clear amazon video app cache and data in settings -> applications.
Hey Blue,
I tried that before and it didn't seem to work. Tried it again and after doing that it allows me to start one title. If I stop the video and try to play another one, it won't stream a different title.
Sometimes when I try to restart the same title it won't do that either.
I redo the clear data and cache it lets me do the one title only thing again very reproducibly.
The Prime video player is version 1.0.247.48-ATVAndroidFOS5.... at size 40.43MB if that helps.
Any other things to try? Thanks for your help.
If you have twrp installed I would reflash current rom and see if that fixes the problem. I'm currently using 5.2.1.1 and had same issue with prime video and clearing worked for me.
Don't know what twrp is, how to check for it or how to reflash the rom. Is there a link or instructions somewhere you could point me to?
Read a little about twrp....looks like with my skill level it's the fastest way for me to brick the firestick, haha. My device is not rooted if that makes a difference?
Is there a low tech way? For example, could the Prime Video app be deleted and redownloaded from the App Store?
If not, what would happen if I reset to factory? Would the stick revert to receiving Over the Air updates? Could KODI be reinstalled if that happens?
Thanks for answering my newbie questions!
emsrph said:
Read a little about twrp....looks like with my skill level it's the fastest way for me to brick the firestick, haha. My device is not rooted if that makes a difference?
Is there a low tech way? For example, could the Prime Video app be deleted and redownloaded from the App Store?
If not, what would happen if I reset to factory? Would the stick revert to receiving Over the Air updates? Could KODI be reinstalled if that happens?
Thanks for answering my newbie questions!
Click to expand...
Click to collapse
You have OTA updates blocked. Is it a reason why if you do not want to root it? You will not be able to reset to factory if OTA updates are blocked however if you unblock it will update to the latest s/w version and at the moment is no way to root it but you can still install Kodi.
Why not reading on how to root it, install TWRP and from here on you can install latest rooted release s/w by rbox.
bula1ca said:
You have OTA updates blocked. Is it a reason why if you do not want to root it? You will not be able to reset to factory if OTA updates are blocked however if you unblock it will update to the latest s/w version and at the moment is no way to root it but you can still install Kodi.
Why not reading on how to root it, install TWRP and from here on you can install latest rooted release s/w by rbox.
Click to expand...
Click to collapse
Best reason to not root it is because I will probably break the thing with my lack of knowledge.
So, I have to re-enable the over the air updates or I won't be able to reset to default factory settings?
How about the idea to delete and reinstall Amazon Prime from the App store, is that a possible way to get it working again?
Thanks!
emsrph said:
Best reason to not root it is because I will probably break the thing with my lack of knowledge.
So, I have to re-enable the over the air updates or I won't be able to reset to default factory settings?
How about the idea to delete and reinstall Amazon Prime from the App store, is that a possible way to get it working again?
Thanks!
Click to expand...
Click to collapse
Prime is part of the system menu and can not be erase as you erase an app
Well, maybe I'll move this stick to a smart tv that has Amazon Prime app already since this is the only problem with the stick as is.
Thanks
Hi,
I've had the same problem with all the Fire TV and Sticks I bought. I live in Italy and always had the same error. I have updates domains blocked so I've always thought it was because of this. Now I'd like to solve cause Amazon Prime video is finally available in Italy too. I've always used rbox roms for my devices and I d'0nt want to go back to official firmware. Amazon app on my Nvidia Shield and Browser app work fine. Any advice? Thanks.
http://oi66.tinypic.com/2i28wh5.jpg
Hi! I have an non-rooted first generation Fire TV, and a 3 weeks ago when I started it up, I painfully discovered that pretty much everything other than the main Amazon app were simply GONE. I haven't the faintest clue as to why this happened, but after several attempts to recover the missing apps, etc, I finally resorted to a factory reset. I then re-installed all my previous apps, but only one of them failed every time I ran it: Netflix for AFTV!
Netflix invariably now immediately reports the "UI-800-3" error and it never stops. I followed all the instructions about how to resolve this problem, but it never works. One possibly critical issue is that, after uninstalling Netflix, when I use the main Amazon interface to attempt to re-download it -- or ANY other app! -- any click on any app to download it is totally ignored! No click sound, no response whatsoever!
So I used the "Apk Extractor" app on the Netflix app on my Second Generation Fire TV, and then installed it on the first AFTV using ADBLink, which completed without error. From then on the "UI-800-3" error nightmare began.
So what I need is a Netflix for AFTV apk that's compatible with First Gen Fire TVs running FireOS v5.2.1.1 -- Does anyone have such?
I've seen recommendations to use the APK for Netflix for Android TV, but that hasn't worked out for me.
Kindly help me. Thanks!
I've tried using ADBLink to install the following Netflix apks: Netflix_3.3.5.apk and Netflix_4.0.5.apk
The latter reports that it is incompatible with first generation Fire TVs, so I uninstalled it.
The former tries to run, but again gets infinite "UI-800-3" errors.
So I removed all the DNS blocks that were preventing Amazon updates, and went ahead (very reluctantly) and upgraded to the latest system, v5.4.2 (if I'm recalling it correctly). But Netflix still refuses to run without eternal "UI-800-3" errors!
Furthermore, when I manually navigate around the main Fire TV app looking to download Netflix, it's nowhere to be found! Every other app shows up and allows downloading EXCEPT Netflix!
What the hell is going on?
Embee11 said:
Hi! I have an non-rooted first generation Fire TV, and a 3 weeks ago when I started it up, I painfully discovered that pretty much everything other than the main Amazon app were simply GONE. I haven't the faintest clue as to why this happened, but after several attempts to recover the missing apps, etc, I finally resorted to a factory reset. I then re-installed all my previous apps, but only one of them failed every time I ran it: Netflix for AFTV!
Netflix invariably now immediately reports the "UI-800-3" error and it never stops. I followed all the instructions about how to resolve this problem, but it never works. One possibly critical issue is that, after uninstalling Netflix, when I use the main Amazon interface to attempt to re-download it -- or ANY other app! -- any click on any app to download it is totally ignored! No click sound, no response whatsoever!
So I used the "Apk Extractor" app on the Netflix app on my Second Generation Fire TV, and then installed it on the first AFTV using ADBLink, which completed without error. From then on the "UI-800-3" error nightmare began.
So what I need is a Netflix for AFTV apk that's compatible with First Gen Fire TVs running FireOS v5.2.1.1 -- Does anyone have such?
I've seen recommendations to use the APK for Netflix for Android TV, but that hasn't worked out for me.
Kindly help me. Thanks!
Click to expand...
Click to collapse
Embee11 said:
I've tried using ADBLink to install the following Netflix apks: Netflix_3.3.5.apk and Netflix_4.0.5.apk
The latter reports that it is incompatible with first generation Fire TVs, so I uninstalled it.
The former tries to run, but again gets infinite "UI-800-3" errors.
So I removed all the DNS blocks that were preventing Amazon updates, and went ahead (very reluctantly) and upgraded to the latest system, v5.4.2 (if I'm recalling it correctly). But Netflix still refuses to run without eternal "UI-800-3" errors!
Furthermore, when I manually navigate around the main Fire TV app looking to download Netflix, it's nowhere to be found! Every other app shows up and allows downloading EXCEPT Netflix!
What the hell is going on?
Click to expand...
Click to collapse
Happened a while back. Netflix is only allowing the most recent version of their app to access their service. And those more recent versions only run on FIreOS 5. So you need to look thru this forum to the numerous ways to upgrade your FTV1 to FireOS 5. It's that simple.
I performed yet ANOTHER full reset and ANOTHER system update until no further updates were available, and finally, Netflix appeared and installed fine. Happily, it works fine!
I haven't submitted enough posts yet that I'm allowed to post external links, but I will be posting the working Netflix apk in another thread, here: https://forum.xda-developers.com/fire-tv/help/netflix-apk-compatible-aftv-gen-1-please-t3628174
I updated to the latest prerooted rom by rbox (jan 8 2018) on fire tv 1 and now can't find Netflix.
I had it before upgrading I was way back at os3, 51.1.1.0 or something and saw it under settings all apps, cleared it's cache and data, then uninstalled. Now when I search for netflix it doesn't find anything. Tried resyncing my purchased stuff under my account and still don't see it. Should I try and reflash the rom now that I've removed my old netflix apk?
CardinalChaos said:
I updated to the latest prerooted rom by rbox (jan 8 2018) on fire tv 1 and now can't find Netflix.
I had it before upgrading I was way back at os3, 51.1.1.0 or something and saw it under settings all apps, cleared it's cache and data, then uninstalled. Now when I search for netflix it doesn't find anything. Tried resyncing my purchased stuff under my account and still don't see it. Should I try and reflash the rom now that I've removed my old netflix apk?
Click to expand...
Click to collapse
An update: I got my answer in a similar board from @Sizzlechest :
"I just installed Netflix on my rooted Fire TV 1 with the latest OS and Netflix works fine.
EDIT: Here's a link to my Netflix APK: https://1drv.ms/u/s!AjlFvM-kUCwh_VrvNbHA-1xdlIx0 "
Hi
Would you mind posting the netflix apk as I have the same issue
I just extracted this today: https://1drv.ms/u/s!AjlFvM-kUCwhgP8UnX0ZLA7WOenuDw
Update: This issue has now been confirmed solved for the Hulu, HBO Go, and HBO NOW app update error.
There are 2 ways to remedy the issue:
1. The prefered method is to update to the newest ROM. Rbox has issued an updated version of his ROM 5.2.4.2_r2. You can get a copy at the forum post here 5.2.4.1_r2. This updated version fixes playback errors in the new Hulu app as well as HBO (Go and Now) issues. Be sure to follow normal flashing instructions. Note - 5.2.4.2_r1 will NOT work for the new Hulu app (4.x.x).
2. If, for some reason, you do not want to flash an updated ROM. For the quick and dirty solution, post #12 gives instructions on correcting the problem. Note that this method only reverts to an older version of the app (3.x.x) and will not allow the new Hulu Live TV service functionality or the multiple accounts functionality. The same will need to be done for the HBO apk as well.
Original Post:
I'm surprised I'm the only one so far posting about this, but maybe I'm the only one experiencing problems.
The new HULU app updated automatically for me yesterday and immediately rendered playback impossible. Any show, movie, etc. comes back with a playback failure error code cdn-3-xxxxxxxx where the "x"s at the end change to different alpha numeric characters at any time. Here is what I have tried so far with NO POSITIVE RESULTS (in addition to speaking with HULU customer service support desk). I am on a rooted box using TWRP and rbox's system files (sloane).
Uninstalled and reinstalled app
Restarted AFTV
Unauthorized app via HULU website and re-authorized
Restarted router, cable modem, and AFTV (even a long term restart as requested by HULU tech support)
Updated AFTV software version (originally I was on 5.2.4.0 - then I updated to 5.2.4.2)
Wiped cache (Factory Reset)
As stated above, none of these worked.
HULU support gave me no way to uninstall the app and go back to an older (working) version, so I am currently stuck without a working version of HULU.
Here's what I'm interested in finding out from the community:
Has anyone experienced the same problems I have and then been able to get the app working correctly? If so, what method worked for you?
I can probably find an old version of the app online, however, I need to be able to block or turn off the update somehow... is there a method of turning the app update similar to how we stop the AFTV from updating automatically?
Any assistance would be appreciated. I'd really like the old version of the app back, since the newer version is crap.
This should be an old version of the apk you can try to sideload: https://www.dropbox.com/s/xw9rv2nxet2lchu/com.hulu.plus-FireTV-3.2.a.apk?dl=0
Thanks Sizzle, but I fear without a method of stopping the update I will shortly be left in a similar situation as I currently am in. Would you happen to know how to stop the automatic update of the hulu apk?
chadster1976 said:
Thanks Sizzle, but I fear without a method of stopping the update I will shortly be left in a similar situation as I currently am in. Would you happen to know how to stop the automatic update of the hulu apk?
Click to expand...
Click to collapse
FireOS 5 UI in Settings/Applications/Appstore/ you can turn off the "Automatic Updates" for all apps. In the future you will get notifications about Updates. You will be able to ignore them or apply them.
Can you confirm that the apk I provided is the older version? I've already upgraded and everything works fine on my Fire TV 1.
Sizzle - I will have some time this afternoon or early evening to implement the rollback and turn off the updates that Y314K provided instructions to earlier. I will post back with results when complete.
Thank you again for the assist.
Yup... I posted this as an issue on aftv news. If your rooted the new Hulu version will not work on your Amazon Fire TV. Please let us know if this method fixes the problem.
Sent from my Nexus 6P using XDA-Developers Legacy app
tekno4ever said:
Yup... I posted this as an issue on aftv news. If your rooted the new Hulu version will not work on your Amazon Fire TV. Please let us know if this method fixes the problem.
Sent from my Nexus 6P using XDA-Developers Legacy app
Click to expand...
Click to collapse
The wife is not happy with Hulu not working and honestly she needs a stock always working AFTV box.
Happy Wife Happy Life! After searching a few different ways I'm unable to find a stock nonrooted 5.2.4.2 zip.
Might anyone know where I can download to flash via TWRP?
I can report same issue, it also effects newer versions of HBO GO
I've got a rooted fully unlocked bootloader FireTV 1 and am using version 4.0.0.342 as reported by Titanium Backup with no problems. What specifically shouldn't I be able to do? My hulu account is ad-free. Perhaps you guys are running an adblocker and do not have an ad-free hulu subscription?
Here's the 4.0.0.342 apk from my Fire TV: https://www.dropbox.com/s/mgvqg1ugzhrjpr5/com.hulu.plus-FireTV-4.0.0.342.apk?dl=0
Here's the old 3.2.a version from my other FireTV: https://www.dropbox.com/s/xw9rv2nxet2lchu/com.hulu.plus-FireTV-3.2.a.apk?dl=0
I am looking into this. If it is what I think, it would only be effecting the Fire TV 2 and has nothing to do with root.
Sizzlechest said:
Can you confirm that the apk I provided is the older version? I've already upgraded and everything works fine on my Fire TV 1.
Click to expand...
Click to collapse
Ok - Here are my findings. I attempted to install the 4.0.xxx version on both of my AFTV2 (sloane) boxes. Neither box would play videos (although the app booted and appeared to run correctly initially). Both are rooted with one running 5.2.4.2 and the other running 5.2.1.1.
After unsuccessful attempts of trying out the v4 app on both boxes, I uninstalled the apk, then rebooted.
Installed 3.2.a and success! Both units work as they should.
Although they are not the newest version of the app, I am able to play back video - so that is a plus
This version will not have the new Hulu Live or the separate account access to the app.
For anyone else experiencing this problem, here is the process I would recommend to solve this:
1. Download earlier version (3.2.a) of Hulu app (see Sizzlechest's link posted earlier)
2. Uninstall current non-working Hulu app.
3. Make sure your app automatic updates are set to OFF by going to Settings>Applications>Appstore>Automatic Updates - OFF
4. Reboot Device (may not be necessary, but what does it hurt?)
5. Connect to device via adb
6. Install Hulu 3.2.a.apk via command "adb install com.hulu.plus-FireTV2-3.2.a.apk" - keep in mind this only works if you did not rename the apk from Sizzlechest when you downloaded it.
7. Profit
You will need to re-logon to the Hulu app.
Thanks for everyone's help on this one! A real community effort.
Looking forward to rbox's discoveries on this subject. Thanks for all of your hard work on this and all of the other projects you've been a part of.
Sizzlechest said:
I've got a rooted fully unlocked bootloader FireTV 1 and am using version 4.0.0.342 as reported by Titanium Backup with no problems. What specifically shouldn't I be able to do? My hulu account is ad-free. Perhaps you guys are running an adblocker and do not have an ad-free hulu subscription?
Here's the 4.0.0.342 apk from my Fire TV: https://www.dropbox.com/s/mgvqg1ugzhrjpr5/com.hulu.plus-FireTV-4.0.0.342.apk?dl=0
Here's the old 3.2.a version from my other FireTV: https://www.dropbox.com/s/xw9rv2nxet2lchu/com.hulu.plus-FireTV-3.2.a.apk?dl=0
Click to expand...
Click to collapse
Sorry, forgot to address this Sizzle.
I DO have the add-free version of Hulu, but not the newer Hulu Live subscription. I am not running any adblocker software.
Okay. I have a theory on why both Hulu and HBO are not working. Like I said this is going to be a Fire TV 2 only thing. If someone is willing to try a fix, please PM me. Do note, this might brick the box. I really don't know. And if it bricks, it'll be super dead. But, there is a slim chance the unbrick program could revive it, so I would prefer someone who has a box that was rooted with my preloader instructions and not KingoRoot. But, if you don't care, and you didn't use the preloader instructions, and want to try anyway, there definitely won't be any way to recover it. I will say this again. If you try this fix, there is a chance it might brick the box. Just want to make that clear.
Is there a specific apk version (link) for hbo now that people have had success installing?
ducksoup18 said:
Is there a specific apk version (link) for hbo now that people have had success installing?
Click to expand...
Click to collapse
Sorry Duck, but I am not aware of the HBO Now app - I use Prime channels for my HBO subscription.
In the case of the Hulu app, I had to revert to the previous whole number version of app in order for it to work - V4.x.x.xxx --> V3.x.xxx
My suggestion is to just try some different versions in a fairly methodical way and see what works. It's fairly easy to install and uninstall via adb and only takes a few min.
Also, be sure to turn off automatic updating in the Appstore (different than updates for system), otherwise your app will just update itself again to the newer version and you'll be stuck.
Hopefully rbox will use his magical powers and get us an answer to all of our troubles soon. :fingers-crossed:
Thanks for the reply @chadster1976. Was able to get things to work by downloading an earlier version of HBO Now from the same place you guys suggested. Thanks again! Was able to watch GOT lastnight again on my main TV.
https://forum.xda-developers.com/showpost.php?p=73144047&postcount=412
rbox said:
Okay. I have a theory on why both Hulu and HBO are not working. Like I said this is going to be a Fire TV 2 only thing. If someone is willing to try a fix, please PM me. Do note, this might brick the box. I really don't know. And if it bricks, it'll be super dead. But, there is a slim chance the unbrick program could revive it, so I would prefer someone who has a box that was rooted with my preloader instructions and not KingoRoot. But, if you don't care, and you didn't use the preloader instructions, and want to try anyway, there definitely won't be any way to recover it. I will say this again. If you try this fix, there is a chance it might brick the box. Just want to make that clear.
Click to expand...
Click to collapse
I'm willing to test as I have spare AFTV devices just in case. Just sent you a PM @rbox
So I downloaded @rbox 5.2.4.2 deleted the SU directory inside the zip as instructed, then wiped everything possible 3x upon which I cleanly reinstalled 5.2.4.2 and Hulu still does not work on my non rooted AFTV 2 Box. Direct TV Now works perfectly without installing HideMyRoot so maybe this is truly just a Hulu issue on AFTV 2 Boxes. @AFTVnews.com
tekno4ever said:
So I downloaded @rbox 5.2.4.2 deleted the SU directory inside the zip as instructed, then wiped everything possible 3x upon which I cleanly reinstalled 5.2.4.2 and Hulu still does not work on my non rooted AFTV 2 Box. Direct TV Now works perfectly without installing HideMyRoot so maybe this is truly just a Hulu issue on AFTV 2 Boxes. @AFTVnews.com
Click to expand...
Click to collapse
Not sure Tekno. I was on chat 3 separate occasions with the Hulu tech support team and they claimed this had only been a rare occurrence... Take that however you want to... The extent of their assistance was resetting everything - including router, modem, etc. Then the final thing they suggested was a factory reset. I eventually did try that after updating to the latest firmware version from rbox. Needless to say that did not work. They couldn't help me with downgrading to the previous working version of the app, which is why I started this thread here on XDA.