It's really hard to find a good one... any suggestions?
https://forum.xda-developers.com/oneplus-3t/accessories/screen-protector-to-t3538708
I suggest the Nacodex 3D curved, it's only an edge to edge, but it's the best one out. Now that the official curved is discontinued.
Nacodex on Amazon
https://www.amazon.com/Nacodex-OnePlus-Protector-Coverage-Tempered/dp/B072NFYQXM
Nacodex on eBay
http://www.ebay.com/itm/Nacodex-3D-...creen-Protector-For-OnePlus-3-3T/311889682042
Nacodex 5 pack on eBay
http://m.ebay.com/itm/5x-Nacodex-On...Tempered-Glass-Screen-Protector-/182646967607
Romman0 said:
https://forum.xda-developers.com/oneplus-3t/accessories/screen-protector-to-t3538708
I suggest the Nacodex 3D curved, it's only an edge to edge, but it's the best one out. Now that the official curved is discontinued.
Nacodex on Amazon
https://www.amazon.com/Nacodex-OnePlus-Protector-Coverage-Tempered/dp/B072NFYQXM
Nacodex on eBay
http://www.ebay.com/itm/Nacodex-3D-...creen-Protector-For-OnePlus-3-3T/311889682042
Nacodex 5 pack on eBay
http://m.ebay.com/itm/5x-Nacodex-On...Tempered-Glass-Screen-Protector-/182646967607
Click to expand...
Click to collapse
Alright thanks. Was thinking about this case https://www.amazon.com/dp/B01IA7TEQ...60&ascsubtag=mobile:995576:15045622708ff40b98
Would it cause too many problems if I were to punch out the built in protector and put the TGSP instead?
xzackly7 said:
Alright thanks. Was thinking about this case https://www.amazon.com/dp/B01IA7TEQ...60&ascsubtag=mobile:995576:15045622708ff40b98
Would it cause too many problems if I were to punch out the built in protector and put the TGSP instead?
Click to expand...
Click to collapse
Can't say on that case. The best fit with a full coverage tgsp like this that I have found is the diztronic, it fits over the edge of the protector, so it won't pop it off. Helps keep dust out I would guess too.
https://www.amazon.com/OnePlus-Diztronic-Matte-Slim-Fit-Flexible/dp/B01HWTWREI
The Spigen rugged armor (it's actually slim, like a normal tpu case) fits good too, but it doesn't go on top of the protector as well.
https://www.amazon.com/Spigen-Rugged-OnePlus-Resilient-Absorption/dp/B01H3PEWDK
xzackly7 said:
Alright thanks. Was thinking about this case https://www.amazon.com/dp/B01IA7TEQ...60&ascsubtag=mobile:995576:15045622708ff40b98
Would it cause too many problems if I were to punch out the built in protector and put the TGSP instead?
Click to expand...
Click to collapse
A friend of mine bought one case such as this, but from Poetic. Somehow the front protection got some stains and the whole case became useless... I would not recommend this kind of case.
This review (which was not his) appoint the same problem
What about the Slim Fit heavy duty version?
Doesn't look like it comes with a built in screen protector.
M using curved one
Any europen link seller?
Romman0 said:
https://forum.xda-developers.com/oneplus-3t/accessories/screen-protector-to-t3538708
I suggest the Nacodex 3D curved, it's only an edge to edge, but it's the best one out. Now that the official curved is discontinued.
Nacodex on Amazon
https://www.amazon.com/Nacodex-OnePlus-Protector-Coverage-Tempered/dp/B072NFYQXM
Nacodex on eBay
http://www.ebay.com/itm/Nacodex-3D-...creen-Protector-For-OnePlus-3-3T/311889682042
Nacodex 5 pack on eBay
http://m.ebay.com/itm/5x-Nacodex-On...Tempered-Glass-Screen-Protector-/182646967607
Click to expand...
Click to collapse
But Nacodex doesn't fit on op 3t (saw the feedback on amazon).
any other suggestion?
sagor1 said:
But Nacodex doesn't fit on op 3t (saw the feedback on amazon).
any other suggestion?
Click to expand...
Click to collapse
The 3 and 3t have the same screen. I have purchased several from Amazon and eBay with no fitment issues.
I think either they are having an issue and the manufacturer is boxing them wrong or those reviews are trolling. Amazon will have your back. If they are boxed wrong, they should be contacting the seller and letting them know so they can fix it.
Romman0 said:
The 3 and 3t have the same screen. I have purchased several from Amazon and eBay with no fitment issues.
I think either they are having an issue and the manufacturer is boxing them wrong or those reviews are trolling. Amazon will have your back. If they are boxed wrong, they should be contacting the seller and letting them know so they can fix it.
Click to expand...
Click to collapse
Did you read the comment on amazon?
3 out of 10 people bought this for there 3t and all of them complaining abut fitting.
i am willing to buy this glass via 3rd party amazon importer in our country (facebook page) and this is for my relative.
so there is no chance to refund.
That's why i am afraid of it.
sagor1 said:
Did you read the comment on amazon?
3 out of 10 people bought this for there 3t and all of them complaining abut fitting.
i am willing to buy this glass via 3rd party amazon importer in our country (facebook page) and this is for my relative.
so there is no chance to refund.
That's why i am afraid of it.
Click to expand...
Click to collapse
I did read them. I have 5 of them and they all fit perfect, I just checked them all. But I did buy them about a month ago. So if it is a box wrong issue or trolls we don't know. If you are buying 3rd party and not able to return, I would hold off to see if the issue gets resolved.
I also have a khaos 3d and it fits the same also, seems like a rebranded. There are the Nacodex 3d with the blue flowers on the box too on Amazon and eBay.
Does anyone know of any third party glue liquid that can be used with these screen protectors to get proper fit?
Sent from my OnePlus 3 using XDA Labs
sagor1 said:
Did you read the comment on amazon?
3 out of 10 people bought this for there 3t and all of them complaining abut fitting.
i am willing to buy this glass via 3rd party amazon importer in our country (facebook page) and this is for my relative.
so there is no chance to refund.
That's why i am afraid of it.
Click to expand...
Click to collapse
Not sure what's going on with those reviews. I also have the Nacodex 3D curved tempered glass on my 3T. The fit is perfect with precise cut outs and works with all my cases. Mine came in the same white and orange box.
Sent from my ONEPLUS 3T using Tapatalk
---------- Post added at 02:37 AM ---------- Previous post was at 02:35 AM ----------
danial.aw said:
Does anyone know of any third party glue liquid that can be used with these screen protectors to get proper fit?
Sent from my OnePlus 3 using XDA Labs
Click to expand...
Click to collapse
Some have used peanut oil but I'm not using a screen protector that requires adding glue or oil. The Nacodex tempered glass doesn't need oil or glue.
Sent from my ONEPLUS 3T using Tapatalk
I bought this and so far this is by no means a perfect fit. The first one I actually reached out to them for because parts of the screen protector were hanging off the screen. The 2nd one that came in was better but still seems like it is a little crooked. That being said it is still sticking with a ZeroLemon case on and hasn't fallen off.
seabro01 said:
Not sure what's going on with those reviews. I also have the Nacodex 3D curved tempered glass on my 3T. The fit is perfect with precise cut outs and works with all my cases. Mine came in the same white and orange box.
Sent from my ONEPLUS 3T using Tapatalk
Click to expand...
Click to collapse
I already ordered 2glasses yesterday from Aliexpress.
Let's see how do they fit & quality.
cheap
always use cheap tg & one expensive cover
---------- Post added at 02:37 AM ---------- Previous post was at 02:35 AM ----------
Some have used peanut oil but I'm not using a screen protector that requires adding glue or oil. The Nacodex tempered glass doesn't need oil or glue. [/QUOTE]
Unfortunately nacodex doesn't seem to ship to Canada :S from either eBay or Amazon
Sent from my OnePlus 3 using XDA Labs
Related
Hello everyone!
Ebay and the local stores have hardly any accessory for the samsung galaxy note. Even if there are stores that do deal in accessories for this device, I have not heard about them.
I thought this would be a perfect platform to discuss about accessories for the note and help map the stores for people who don't have much idea (like me).
Inviting ideas and opinions, please.
Sent from my GT-N7000 using XDA App
As for me, I have:
- a decent P250 screen protector (not bad for the price) | Glossy | Finger print magnet | they did not have the matte one
- sad and boring looking jelly-case (does the job though). | P250 as well | Some reviewer was taking about some Samsung original (flip top) covers, but it was hardly any info as I could not find where he got it from.
Tomorrow I will check out the zagg invisible shield store at SM Megamall (I guess there is one). And will hit back to the topic with the pricing and quality.
Sent from my GT-N7000 using XDA App
Accesories for Note
I bought a decent screen protector in Greenhills for Php150. First I look around, there were many of them selling the same screen protector but the cheapest I could find of the same brand was Php150. Sorry I forgot the name. Matte and gloss available. Just look and ask around in Theater Mall GH, not in ViraMall GH as it is more expensive there.
Also I was able to find a realook screen protector matte or gloss (take your pick) also somewhere in Theater Mall GH, it comes with 2 screen protector, cleaning cloth, alcohol something (I guess for cleaning) and its around Php600-800. Looks legit. She even gave me a calling card of the GM of the company of realook here in Phil. She tried to sell me only one piece of the shield that is already open for Php600. Good thing I read at the back of the package that it comes with 2 pcs of shields. I got it down as low as 500 and she still agreed to sell it to me. I didn't bite.
She said it will be available soon so I will be back there next time. I think the one she tried to sell me was only a sample.
For casing in GH, just jellys. Try looking in the internet, there are already a lot of cases available and with high quality. They ship in the Philippines. I am just not sure about the feel that is why I am still waiting for legit cases to be available here so I can try it out first before buying.
For the flip cover, if you buy directly from Samsung or from any legit stores, the cover comes with it. At the back of the package, it writes 'Not for sale.'
the note and the accessories for it should've arrived on the same date. its really hard to protect a big phone/tablet from scratches and all.
waiting for otterbox to arrive, its taking too long
I have seen otterbox for iphone, it looks good. I will wait and see if it becomes available here in Phil for the note. I hope it arrives soon. I have been using the free flip cover, its good but it offers no protection for the sides.
Sent from my GT-N7000 using Tapatalk
Had gone to megamall today... saw the flip cover from samsung at wellcom (guess that's the name of the store). But it was free with a purchase of a new note (P34990). They were not selling it separately though, which was sad.
The samsung mobile store was crowded as hell. Wanted to check out a store unit of the note and compare it to mine (for the screen issues), but I could not (other people checking the unit). Not a single sales person paid attention to what I needed (a flip cover). Was disappointed, but that's howsamsung operates around the world, I guess.
Zagg Invisible shield was also there. The sales people over there were too busy to notice my presence (though I am 6ft tall). Did not get to know if they had something for the note. But I did look at the price (if available). P1000 for the back part. P800 for the screen. And P1500 for the whole unit. Is kinda expensive, but hey, protection comes at a premium.
Sent from my GT-N7000 using XDA App
otter box in Megamall did not have any info abt developments in the note in the company. When I asked her... she said no info yet
Sent from my GT-N7000 using XDA App
Zagg Shield
Were you able to see if they are indeed selling Zagg Shield in Megamall?
What store? Inside the technohub?
allansy said:
Were you able to see if they are indeed selling Zagg Shield in Megamall?
What store? Inside the technohub?
Click to expand...
Click to collapse
Yes! There was a store in the Technohub! Any news on the Flip Covers for the device? Any one selling it in loose?
I passed by Zagg in Megamall last Friday with my Galaxy Note. The lady said she didn't have any shields yet for the note... so, i opted for a screen protector which cost me 200 pesos (at BSA International) and a stupid looking blue jelly case.
In ebay, there are some really nice leather cases... especially those that are made in Korea. A bit pricey though... ranging from $35 to $75... shipping not included.
nbc1213
nbc1213 said:
I passed by Zagg in Megamall last Friday with my Galaxy Note. The lady said she didn't have any shields yet for the note... so, i opted for a screen protector which cost me 200 pesos (at BSA International) and a stupid looking blue jelly case.
In ebay, there are some really nice leather cases... especially those that are made in Korea. A bit pricey though... ranging from $35 to $75... shipping not included.
nbc1213
Click to expand...
Click to collapse
May be that is why they were not paying attention to me! they might have seen me with a note in my hands and thought that they cant help me anyway...
About otter box, Nothing available as yet! this is getting pretty sad... screen issues doubled up with lack of accessories... Just a silly scratch guard and a stupid jelly case over here too!
i bought a capdase copy + gloss protector for just 150php..im still lurkin around for some leather flipcases..
ebay casing nad screen protectors
Hey guys!
I have been checking in ebay philippines with Location filtered to Worldwide.
There are a lot of sellers selling decent casing for galaxy note. There is the Black S line Silicone TPU Skin Case Cover for less than PhP200, also there is the aluminum cover that looks sleek selling for PhP1,500. For screen protectors, I haven't gone back to GH to check on the realook screen protectors but I'm sure by next year they already have that. I was there late November and they already have it opened that's why I didn't buy it.
Also, ebay (filtered worldwide) is selling flip covers but it is really expensive with price at least PhP2,000.
Thanks!
I have only seen matte screen protectors around. They make the white of the screen look sparkly and as such would like a clear protector instead.
To those guys who bought the clear/glossy screen protectors, what store/mall did you buy them from and how much did you guys pay for them?
How is the quality as well? Does it affect the screen that much?
And to those who have bought matte screen protectors, have you had any matte screen protector that did not affect the whiteness of the screen (did not make is sparkly)?
Thanks.
---------- Post added at 02:47 PM ---------- Previous post was at 02:28 PM ----------
ariboi said:
As for me, I have:
- a decent P250 screen protector (not bad for the price) | Glossy | Finger print magnet | they did not have the matte one
- sad and boring looking jelly-case (does the job though). | P250 as well | Some reviewer was taking about some Samsung original (flip top) covers, but it was hardly any info as I could not find where he got it from.
Tomorrow I will check out the zagg invisible shield store at SM Megamall (I guess there is one). And will hit back to the topic with the pricing and quality.
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Where did you buy (store and mall) your screen protector from? How is it? Is it clear? Does it affect the colors? Does it look like it does not have a screen protector?
Guys i have a zenus case ostrich diary for galaxy note. Just pm me if you want it.
Its brand new P3,700
Sent from my GT-N7000 using XDA App
knowsnophones said:
I have only seen matte screen protectors around. They make the white of the screen look sparkly and as such would like a clear protector instead.
To those guys who bought the clear/glossy screen protectors, what store/mall did you buy them from and how much did you guys pay for them?
How is the quality as well? Does it affect the screen that much?
And to those who have bought matte screen protectors, have you had any matte screen protector that did not affect the whiteness of the screen (did not make is sparkly)?
Thanks.
---------- Post added at 02:47 PM ---------- Previous post was at 02:28 PM ----------
Where did you buy (store and mall) your screen protector from? How is it? Is it clear? Does it affect the colors? Does it look like it does not have a screen protector?
Click to expand...
Click to collapse
The one i have is not the clearest... i already have a few scratches... i got it from green hills!
rockysiccion said:
Guys i have a zenus case ostrich diary for galaxy note. Just pm me if you want it.
Its brand new P3,700
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
By any chance, do you have any pic of this? I'm interested. Where are you based? Thanks.
Btw, for others asking about the case with NOT FOR SALE tag. I was able to buy one for P800 at Cyberzone SM Cubao. (Yes, I'm that silly. Lol!) Forgot the name of the shop but its just near the escalator, beside Tylex.
Got an original samsung flip case for the note at GH for 800php. This however still leaves the sides unprotected so I had to use a jelly case, only I cut the sides to accommodate the flip part. It doesn't look ugly as it sounds, and does the job until we get invisishield for the Note.
rockysiccion said:
Guys i have a zenus case ostrich diary for galaxy note. Just pm me if you want it.
Its brand new P3,700
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
you mean this one?
2k markup...
I reckon you can get this on some online chinese retailer shop with only 500php shipping, link is around the forum
Globe APN
Hey guys! Sorry if I am in the wrong thread, but I think this is where all the Note users in Phil are posting.
Quick question: Were you able to activate your Globe 3g on your Note? Please share the APN settings. I am having trouble connecting to 3g. I am a Globe prepaid user and my sim card is I think 4 to 5 years old.
Many thanks!
allansy said:
Hey guys! Sorry if I am in the wrong thread, but I think this is where all the Note users in Phil are posting.
Quick question: Were you able to activate your Globe 3g on your Note? Please share the APN settings. I am having trouble connecting to 3g. I am a Globe prepaid user and my sim card is I think 4 to 5 years old.
Many thanks!
Click to expand...
Click to collapse
I use globe too. And NO! There is no support for the Note yet! I tried sending a message to get the settings and the reply was something like 'handset not supported'...
I tried taking to a globe customer rep, he gave me a few settings over the phone... they did not work either!
Sent from my GT-N7000 using XDA App
Finally. An amazing TPU case without the cheesy back design.
http://tpu-cases.com/index.php?main_page=index&cPath=42_68
Amazon link
Lol whats so amazing about them
Sent from my MB860 using XDA
The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.
LLStarks said:
The Galaxy Nexus Diztronic case is highly praised on Amazon and Reddit.
I figure the S3 case will be too.
Click to expand...
Click to collapse
Yes, its just a very solid tpu case.
Sent from my SAMSUNG-SGH-I717 using xda premium
Wond3r said:
Lol whats so amazing about them
Sent from my MB860 using XDA
Click to expand...
Click to collapse
The quality of the plastic is superior. Once I bought one for my Galaxy Nexus I've got one for every phone since then. They are the best TPU brand for phones.
You won't regret it. It's cheap too!
My SII Skyrocket Diztronic case ended up being my favorite of the various cases I tried.
Not at all flashy. Nothing special about it.
It just "works" properly. And doesn't get beat up like cheaper cases do.
And I like that they are finally doing cutouts for BOTH the volume & power unlike on my last case.
I hate anything covering the power or volume buttons. Though some folks do like that.
I've used these cases for 2 years on Captivate, Infuse, Galaxy Nexus and Note. They're grippy, durable and fit perfectly. I just ordered one for my S3. Thanks for the heads-up.
I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?
I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.
jfenton57 said:
I have a Cruzelite...definitely sub par to the Diztronic cases I've had in the past and I'm sure it will be the same with the new one I have on the way.
Click to expand...
Click to collapse
Damn you. I bought a Diztronic Matte Black.
komugi said:
Damn you. I bought a Diztronic Matte Black.
Click to expand...
Click to collapse
Matte Black is a the best color imho
Sent from my SAMSUNG-SGH-I717 using xda premium
komugi said:
I already have Rock Case, 4 Cruzerlite TPU cases... and a Leather pouch... Do I need/want one more....?
Click to expand...
Click to collapse
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol
Sorry for the delay in getting our S III cases up guys, I was out of town and had an employee put them up. Unfortunately she accidentally set the start selling date as July 6th so the pages never went live. I said didn't you realize we weren't getting any orders?! We sent inventory to Amazon on Friday so Prime shipping options should be available either Tuesday or Wednesday.
We did include a screen protector with this release made of Japanese film. When we first started including screen protectors we were using a Korean film, which is slightly better than Chinese but still had some rainbowing and purpling. These Japanese based ones are great, very good clarity. Even though including them almost doubles our costs we've kept our prices the same for the time being. Thanks everyone for your continued support!
Sent from my SPH-D710 using xda premium
Just got the matte-clear case! Looking forward to getting it in the mail
OneStepAhead, does the screen protector cover the entire front and have cut-outs?
Wond3r said:
Lol whats so amazing about them
Click to expand...
Click to collapse
The company resides and manufactures in America (Madison, WI, near me!!). The customer service is absolutely OUTSTANDING. You basically end up talking to a real person who is dead set on making sure you're satisfied.
And TPU, in general, is perfect for me. Thin, adds a little grip but doesn't stick in pockets.
vince1234 said:
cruzerlite is garbage. i sent it in for a refund. the cut outs dont even line up with the ports correctly lol
Click to expand...
Click to collapse
cldn't agree more, they are indeed bad. Just ordered Diztronic for my S III . Loved it on my Nexus , was waiting for a week for it to be available in the meanwhile i thought i would try cruzerlite . Apart from the fit, i dint like the looks of it too, esp that i wanted something with a plain back matte finish . Diztronic was the perfect fit . Love it Love it!!!
Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)
jfenton57 said:
Actually they are in Madison, but my EVO 4G LTE Diz TPU's specifically stated Manufactured in China.
I put them in a bowl of water and they don't sink so I'd guess they aren't full of lead.
The water did turn green and looked like antifreeze though (just kidding!)
Click to expand...
Click to collapse
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
LLStarks said:
OneStepAhead, does the screen protector cover the entire front and have cut-outs?
Click to expand...
Click to collapse
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.
OneStepAhead said:
We are in Madison, WI but unfortunately we have our cases made in China for the time being. I'm looking at potentially having them made in Akron, OH but it's not set in stone at this point. If anyone has any contacts with US based factories that can manufacturer TPU cases feel free to contact me. For now we are using the same lingo everyone else uses, "Designed in ___ Manufactured in China". Our screen protectors however are manufactured in Japan. Some of you should be receiving your GS III cases today, I know at least one XDA member received theirs on Saturday as they were in Wisconsin. I'm looking forward to seeing some feedback as my GS III from Sprint hasn't arrived yet!
---------- Post added at 12:52 PM ---------- Previous post was at 12:44 PM ----------
It doesn't have a cutout for the camera, as in my opinion I'd rather have it covered so it's protected. If someone can show me an example of diminished picture quality because of it I may be swayed to make a cutout for it in the future. As far as going all the way to the edge of the glass, from what I understand it's not possible to do so on the GS III because of the way the glass tapers on the edges, so we made the screen protector in the same way as our One X screen protector. It essentially covers the flat part of the glass. You could probably go all the way to the edge with a wet adhesive based screen protector, but with a static type screen protector they would just peel up.
Click to expand...
Click to collapse
Great response. Its great to have good interraction with the manufacture and the end user. That makes for the best experience in both parties. Thank you.
Hi Guys. Just got a T989. Do you know any good strong cases and screen protectors?
I have been looking around in stores but they do not carry many T989 cases.
Thanks
Goto amazon and type T989 and you will see plenty. Im a total geek and buy devices all year(addict). Get a xtreme gaurd screen better than zagg and cheap. Use the black fishbone case or the D30 case
Sent from my SGH-T989 using xda app-developers app
smartypants0 said:
Hi Guys. Just got a T989. Do you know any good strong cases and screen protectors?
I have been looking around in stores but they do not carry many T989 cases.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1885042
That is a thread with a good case and screen protectors. The case is a Cimo S-Line TPU Case. It is around 5 dollars on Amazon, even though it is a great case. I also ordered a 5-pack of screen protectors for a $1.50 and they have been working very well.
Links,
Screen Protectors: http://www.amazon.com/gp/product/B006EC5X6O/ref=oh_details_o02_s00_i00 When i purchased them, they were from a different seller. The price went down to $0.95. It is a steal in my opinion.
Case: http://www.amazon.com/gp/product/B006K6PGSY/ref=oh_details_o01_s00_i00 The case has been very good so far. Check out the thread for an unboxing, pictures, and the thread will soon also be updated with a review.
Fishbone from E-bay. Little bit expensive but everyone say WOWWWWW!!! when they see it! Lol!!!
Accessories of all kinds are dependent upon preference. How much protection do you want? How important is it that the form factor remain sleek and attractive?
I went with a Seidio Active case, as I felt it would offer best protection, and a zagg shield, because the service we've gotten locally from their kiosks has been great.
http://forum.xda-developers.com/show....php?t=1885042
That is a thread with a good case and screen protectors. The case is a Cimo S-Line TPU Case. It is around 5 dollars on Amazon, even though it is a great case. I also ordered a 5-pack of screen protectors for a $1.50 and they have been working very well.
Links,
Screen Protectors: http://www.amazon.com/gp/product/B00...ls_o02_s00_i00 When i purchased them, they were from a different seller. The price went down to $0.95. It is a steal in my opinion.
Case: http://www.amazon.com/gp/product/B00...ls_o01_s00_i00 The case has been very good so far. Check out the thread for an unboxing, pictures, and the thread will soon also be updated with a review.
Click to expand...
Click to collapse
Is the screen protector you listed here a matte screen protector? It says anti-glare, but doesn't say that it is matte. Thanks!
gamzerz said:
Is the screen protector you listed here a matte screen protector? It says anti-glare, but doesn't say that it is matte. Thanks!
Click to expand...
Click to collapse
I think so.
---------- Post added at 03:50 AM ---------- Previous post was at 03:21 AM ----------
Tornade69 said:
Fishbone from E-bay. Little bit expensive but everyone say WOWWWWW!!! when they see it! Lol!!!
Click to expand...
Click to collapse
I can't find the link for the fishbone. Can you please give it to me?
theandroidrooter88 said:
I think so.
---------- Post added at 03:50 AM ---------- Previous post was at 03:21 AM ----------
I can't find the link for the fishbone. Can you please give it to me?
Click to expand...
Click to collapse
Cannot post link yet here because i'm new but just simply search for Fishbone t989 on ebay site... Lot of colours avalaible!
Tornade69 said:
Cannot post link yet here because i'm new but just simply search for Fishbone t989 on ebay site... Lot of colours avalaible!
Click to expand...
Click to collapse
Thanks
I just got grabbed a D3O case with T-Mobile screen protectors off eBay. The package is only 12.99, supposed to be all authentic. I've used D3O on other phones, they have really nice cases. I've never used a T-Mobile brand screen protector, but I can't imagine it'd be too bad.
Edit: they also have different colors if you don't like the black.
Here's a link to the case on eBay
im having trouble uploading a picture, and still dont have enough posts to put links but i am actually using this case that can be found on amazon by putting in
ATC For Samsung Galaxy S2 II T-Mobile T989 Android OS Hercules 4G Black&Blue Silicone / Rubber Case
there are many variants on amazon. people selling it under diff names. but i like the added protection on the corners where a phone mostly hits when falling. the protection it offers on the back, and the lip is thick enough that if it falls screen should touch the floor on a flat surface. i have not had issues with the screen protector peeling from the corners either. i like that the blue snap cover holds the silicone in place so it doesnt slide off when in my pockets
SurgeRush said:
I just got grabbed a D3O case with T-Mobile screen protectors off eBay. The package is only 12.99, supposed to be all authentic. I've used D3O on other phones, they have really nice cases. I've never used a T-Mobile brand screen protector, but I can't imagine it'd be too bad.
Edit: they also have different colors if you don't like the black.
Here's a link to the case on eBay
Click to expand...
Click to collapse
Just got these today and I have to say, if I had the choice to do it over, I wouldn't buy them. I've always used D3O cases and they always seem like they are good quality, but this flex case, I personally think feels a bit cheapy. I don't know what it is about it, but I'm not a fan. I also usually use Zagg screen protectors, but I decided this time I'd try something else because I don't really like the rubbery feel of the Zagg protectors. BUT the best thing about the Zagg protectors is that they stretch which makes fitting them on with a case much easier in my opinion, also the wet application makes putting the protector on much easier since you can slide it around. This protector was a pain to get on, plus the fact that every time you FINALLY get it right, dust has decided to settle on the screen so you have to wipe it off or blow it off and by then I've moved the protector by a mm so it goes off to the side now.
So I'm probably just going to stick with what I have for now, but eventually I'm sure I'm going to go with a different case and a different screen protector. The dual shock D3O cases are probably much better quality than these flex cases.
Edit: I did buy it off eBay, so I know there's always the possibility that the case is a fake, but everything looks pretty legit to me. I'm going to head to a T-Mobile store today or tomorrow and check out the cases in the store to double check though.
a friend bought the D30 from T-Mobile when she got her GS2. I do not like it at all the buttons are waaaay too hard to press.
I had a trident on my OG Vibrant and it was the most amazing thing ever, I could throw that phone across the room and it was fine.
+1 on the Fishbone case. Just enough protection and it still goes in and out of my pocket easily.
In my opinion the Steinheil Ultra Fine screen protectors are great. Anti fingerprint and anti glare. I have had mine on my t989 for about a year so far and it still looks great. Just my opinion, give it a try.
I personally like the screen protectors from the T-Mobile retail store. Though a little pricey but it looks amazing if applied correctly. Had mine on since last December and it still looks new.
Installed last night and very impressed. Had 3 small patches of spider web, 2 of which have gone on their own and the 3rd is hardly noticeable and I have a feeling this will go too.
There's a slight lift around the edges of the earpiece, I guess that's down to the glass on the phone not being completely flat.
I've had a Spigen tr and a Nillkin, neither of which went on as well as the Anker - although that could be just me having more practice!
Oleophobic coating is also working nicely, a few smears but overall very good indeed.
I'd definitely recommend one especially if you don't want to pay the premium for Spigen.
Amazon UK Link
This is with a Spigen Ultra Hybrid..
Just got one of these myself. Its pretty good but my cruzerlite tpu case is not working well with this SP. Might need to get a different case
Sent from my Nexus 5 using XDA Premium 4 mobile app
I wish this was available in Canada =(
Just put mine on yesterday and only ended up with one small bubble in the top left area of the phone and no spider webs (w00t w00t!)
I have it paired with a Spigen Slim Armor and it fits on JUST about right. Not sure if it's putting pressure on the glass screen but it looks like it fits perfectly. We'll see how long it lasts with it.
Texture on the glass screen is amazing. Neither I or my co-workers could feel any type of difference.
bought this and have small spiderweb at bottom.. still happy, very high quality.
hope sw goes away after time.
I agree, wish I could find these in canada. $15 bucks I'm willing to spend, $35 not so much.
mgeller87 said:
I agree, wish I could find these in canada. $15 bucks I'm willing to spend, $35 not so much.
Click to expand...
Click to collapse
if you don't care waiting a few weeks, you can buy this Glass-M (0.15mm) for 19.99$ US free shipping to canada :
http://www.aliexpress.com/item/0-15...en-Protector-For-Google-Nexus/1500677869.html
I just installed mine tonight. I love it. Feels great and have no issues with the touch screen.
I could have lined up the protector a little better, but despite that I only have a couple a small air bubbles that should go away.
I highly recommend it! I just wish my cruzerlite case would still work with it. Oh well...
Sent from my Nexus 5 using Tapatalk
Shame about the cases not working well.. Spigen Hybrid is fine, not noticed any issues as yet.
Can you please provide some pictures? :good:
How thick is this screen protector?
I'll take some later :good:
0.38mm I think, feels very nice though.. not too thick at all.
Many thanks!
I can't seem to find the UK or German amazon site for this?
How does it compare to Mime Ghost glass?
Cowboy_Henk said:
I can't seem to find the UK or German amazon site for this?
How does it compare to Mime Ghost glass?
Click to expand...
Click to collapse
UK Link -
http://www.amazon.co.uk/gp/product/B00GTIH064/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
On sale bargain!
I will get some photos soon..
Seedyh said:
UK Link -
http://www.amazon.co.uk/gp/product/B00GTIH064/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
On sale bargain!
I will get some photos soon..
Click to expand...
Click to collapse
No...Look to the title. This is the link to "AnkerĀ® Screen Protector for Google Nexus 5 [3 Pack] Xtreme Scratch Defender Ultra-Clear High-Response Premium with Lifetime Warranty"
The Pet film screenprotectors....
Oh that's weird.. The link came from my order confirmation from Amazon for the glass protector! I didn't read it, just assumed it would be correct.. I guess they aren't selling therm.
Edit: ha just noticed that the original link in the first post goes to the wrong item now too.. Ah well.
Sent from my Nexus 5 using Tapatalk
Seedyh said:
Oh that's weird.. The link came from my order confirmation from Amazon for the glass protector! I didn't read it, just assumed it would be correct.. I guess they aren't selling therm.
Edit: ha just noticed that the original link in the first post goes to the wrong item now too.. Ah well.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I'm wondering when they are selling them again. I'm doubting between Anker or Mime Ghost screen. Which one is better? Anker offers lifetime warranty though!
Not sure, I've not used the Mime yet.. Only this, the Spigen and the Nillkin. The Anker has been the best so far, it's still on my phone and not chipped, which is an improvement!
Sent from my Nexus 5 using Tapatalk
i got one recently about 2 weeks ago, and for some reason i got a huge bubble spider looking web about half inch on the bottom of my screen and about 2 small spider webs which i didnt mind too much. I contacted them through amazon since supposedly they're bubble "free". This is the reponse i got
"Thanks for the response and sorry for the issue.
Actually we have had this issue reported and we are currently investigating it with our suppliers as it seems to be a batch issue. A replacement as much as I would have liked to make, it's not a viable option.
May I ask a second chance to make things right by issuing a refund? We will further process once we get your consent."
Ever since then the screen protector is not available, i didnt want a refund because i liked the screen protector but that half inch bubble its getting on my nerves. So i went ahead and accepted the refund will be trying Nilkin i guess.
I got this screen protector a couple weeks ago, too, and I have a big bubble at the bottom that hasn't gone away. I just called and they said they have made some manufacturing changes to the protector which should (hopefully) resolve the bubble problems. However, the new batch won't be ready for 1-2 weeks.
I am going to wait for a new one. They will call me when they are ready to be shipped.
So.. I ordered a thing... its supposed to be a New style Tempered glass for the Galaxy S8 and S8 Plus Phones!
GravX
https://youtu.be/4c0dHp7uHEA
When I got it the, I told there seller that it wasn't really fully adhesive in the usual (real glue) way. He said it's a substrate of the glass that has nano pores on it... It has something on it.. Cause it sticks better and looks better... Except for a liquidy looking black smudge.. The real glue on it has definitely been changed.. And is noticbley stronger the the other ones..
https://www.alibaba.com/product-detail/Galaxy-s8-and-s8-full-ab_60659712905.html
Got it from Alibaba.com.. I will be giving away 2 or 3 of these guys in a give away towards the end of the week.. All you need to do is like a subscribe and leave a comment . I will announce the winners on my twitter page. The info is at the end of the video.. I will be conducting more testing on this during the next week.. Such as VR headset compatibility .. Their are no micro dots on this screen protector.
This Does not have the Dot matrix on the Display ( little dots)
This Technically isn't "real adhesive" its more of a textured nano suction surface on the glass.. with that being said.. It does stick much better then the other ones... ( it does and I was surprised it did)
It used a new Adhesive on the edges that blends into the Surface of the Glass on the protector.
I will get into more details on this glass in Part 2
In the mean time sit back and enjoy and think of question and testings you want me to try on this new Glass!!
Hi GravX,
Thank you for the tip!
I contacted the company and actually ordered some of those. They really look promising. Also ordered the Unicorn Pro case since it fits perfectly in your video.
finally someone tested a variety of cases with a screen protector ..
I will update once i received them !
BR
How many did you order?
syther said:
Hi GravX,
Thank you for the tip!
I contacted the company and actually ordered some of those. They really look promising. Also ordered the Unicorn Pro case since it fits perfectly in your video.
finally someone tested a variety of cases with a screen protector ..
I will update once i received them !
BR
Click to expand...
Click to collapse
I contacted the seller and they said 200 minimum order... ya ok.
I'm willing to buy this? Anyone want to bulk order and sell them here. I ended up buying the s8+.
gamer765 said:
I'm willing to buy this? Anyone want to bulk order and sell them here. I ended up buying the s8+.
Click to expand...
Click to collapse
If they're really full adhesive, there will be an Amazon prime seller popping up with them once the first US shipment arrives. Don't stress yourself out trying to sell 200 screen protectors in your free time
It shouldn't be that hard, just don't price them to high or break even by pricing them at what you paid. Everyone cares about profits only and when you think like that, just maximizing your profit, it's hard to move product.
Is anyone able to order? if someone got some PM me please. I am interested. I have few s8 and s8+.
Whitestone Dome screen protector from Amazon. Simply amazing. Expensive but worth it
I did manage to order a few of them, they are suppose to send me the full screen and case compatible.. I can't wait to get them so I can try it out
New review on YouTube. Seems like this glass is a Fail too. https://youtu.be/4c0dHp7uHEA
Sent from my SM-G950F using Tapatalk
---------- Post added at 07:44 AM ---------- Previous post was at 07:44 AM ----------
However found another video in the comments : https://youtu.be/j3Jle5KViNI
Sent from my SM-G950F using Tapatalk
Noice!
Let me know how you like them!
Its not a fail
x017in said:
New review on YouTube. Seems like this glass is a Fail too. https://youtu.be/4c0dHp7uHEA
Sent from my SM-G950F using Tapatalk
---------- Post added at 07:44 AM ---------- Previous post was at 07:44 AM ----------
However found another video in the comments : https://youtu.be/j3Jle5KViNI
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
This screen protector is definitely better then the older version.. Its not full screen adhesive like they advertised on alibaba... "invisible glue" more like no glue.... But the edged adhesive is way way better and it fits secure to your screen...
x017in said:
...
However found another video in the comments :
....
Click to expand...
Click to collapse
I have chatted with them on facebook. they say that they are producers, not sellers, and that this protector will come eventually (in at least a month) in Amazon under various names.
---------- Post added at 08:12 PM ---------- Previous post was at 08:06 PM ----------
GravX said:
This screen protector is definitely better then the older version.. Its not full screen adhesive like they advertised on alibaba... "invisible glue" more like no glue.... But the edged adhesive is way way better and it fits secure to your screen...
Click to expand...
Click to collapse
could you talk to the alibaba colleagues - when do we have this protector on Amazon or Aliexpress?