Related
Ok... i've gone through the steps in the one thread to get the phone rooted and everything without tripping the flash counter. At least the rooting with ODIN part. Been trying to flash CWM Touch for it, but for the life of me can't get the S3 to enter debugging mode over USB so that it can be seen by ADB to do so. I have Debugging over USB checked in the settings on the phone, i've rebooted the phone several times... it just never seems to enter debugging mode (or at least not like on my old Atrix 4G, where it actually told you in the notification bar that debugging was enabled).
It doesn't say debugging enabled. Do you have Kies installed? If so make sure it isn't running. Plug in the phone and type adb devices. If detected adb will report a serial number.
gunnyman said:
It doesn't say debugging enabled. Do you have Kies installed? If so make sure it isn't running. Plug in the phone and type adb devices. If detected adb will report a serial number.
Click to expand...
Click to collapse
I had installed Kies... tried hooking it up, still wouldn't list in ADB. uninstalled Kies, but kept the drivers installed. And i only mentioned the idea of it saying Debugging enabled when you connect the USB cable because my Atrix 4G said that every time from the get-go.
Also odd.... looked into the SuperUser app... and the log shows several allowed access attempts from "shell"... yet never seemed that way in ADB.
I had the same problem... try going in to the "services" settings and update the driver to Android ADB composite. Other than that, my suggestion is to make sure Kies finds the drivers for both Camera mode and USB mode by toggling the selection while plugged in to Kies.
Sent from my SGH-I747M using xda app-developers app
Your last resort would be to remove the drivers and reinstall them... Don't install Kies...
Or do you think i might have better luck in Ubuntu? Have that installed on my desktop as well.
edit: well... that's odd. booted into Ubuntu, installed the linux Android SDK and everything, got everything set up. opened the terminal, and just checked the devices without being in the ADB Shell... and a device showed up. launched the adb shell... checked devices again... nothing showed up, as on Windows. Figured what the hell, and did the command to install the recovery, and it worked.
elementaldragon said:
Or do you think i might have better luck in Ubuntu? Have that installed on my desktop as well.
Click to expand...
Click to collapse
It seems to be a driver issue, kies interfering, or a component is missing, or all of that, so I'd start your windows driver and software over fresh...
Uninstall Kies
Uninstall the drivers
Reboot
Install the drivers
Install the Java JDK (64bit has never worked for me, even though the drivers are 64bit)
Install the Android SDK
Use the Android SDK to get the Platform Tools and the Google USB Driver
than adb devices should show a phone
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
elementaldragon said:
edit: well... that's odd. booted into Ubuntu, installed the linux Android SDK and everything, got everything set up. opened the terminal, and just checked the devices without being in the ADB Shell... and a device showed up. launched the adb shell... checked devices again... nothing showed up, as on Windows. Figured what the hell, and did the command to install the recovery, and it worked.
Click to expand...
Click to collapse
sometimes ADB Devices returns nothing for me, but theres a phone there, it would say nothing connected or to some effect if it didn't find anything...
Yea... every time i entered "adb devices" in the Windows command prompt, it always said "List of detected devices" or whatever it says, but nothing would be there, and if i tried the command to install the recovery it would say it was not a valid directory or whatever. Didn't show up on Ubuntu either, but it still worked...
EDIT/UPDATE: I was using a USB 3.0 port which apparently ADB didn't like (though ODIN rooting on that USB port worked fine...). I switched to another USB port and suddenly it worked!
Sorry to resurrect an old thread but I guess it's better than creating a new one for the same purpose...
Doesn't seem like this was resolved and I haven't been able to get my S3 to connect to ADB. I'm running Windows 7 Ultimate 64 Bit.
I had this driver already installed:
ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0
I enabled USB debugging and it wouldn't connect. I installed Kies, still wouldn't connect. I uninstalled the driver and Kies and rebooted. Reinstalled "ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0", installed the Google USB driver, still won't connect.
I'm still not sure if I'm supposed to see any sort of notification in my bar showing that USB debugging mode has been executed but I'm definitely not getting anything like that.
Code:
D:\APPS\ANDROID\android-sdk-windows\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
891b0876 offline
D:\APPS\ANDROID\android-sdk-windows\platform-tools>adb devices
List of devices attached
Yea, when i finally was able to use ADB to push a recovery onto my S3, it never actually showed up if i checked the devices in ADB Shell. Well... it DID, but not if i already typed the SU command before "adb devices".
hey guys
i have same problem i wanna adb my galaxy s3 rogers (att) i am trying to do the root no tripping flash counter so i got to the adb shell part
i dont know what else to do to make my computer recognize my phone ??
i installed sdk and extract/installed it in the c:\android folder of my comp i let sdk installed all the things it needs to took a while
so whats left? i have my phone usb connected to comp and debuging on i type adb shell it says adb is not recognized internal or external command???
do i need to have somthing open on the phone b4 openning command?
pleaaase help lol
thanks
You need to navigate to the folder where adb is actually located (platform-tools)
You don't have to use adb, you can use the same commands on terminal emulator
So I have had my Galaxy Nexus since the day it came out, I rooted it before I even activated it.
Like many, I have used all sorts of different ROMs over the year period.
I have never had any problems with adb or anything. I have pushed and pulled files and all of that numerous times.
Until yesterday, I finally upgraded my recovery from an really old (first touch based recovery) to the newest TWRP. It worked fine. I put my phone into fastboot mode, and was able to flash the new recovery through the command prompt (adb/fastboot) on my PC. Then I switched to a new 4.2 rom (Paranoid android 2.99)
So today, I wanted to try some editing on some system files, so I went to go pull some files off of the phone (using adb of course), but now it just tells me that my device is offline.
I tried
"adb kill-server"
"adb start-server"
"adb devices"
It lists my device number, but just says "offline"
I tried to update everything. (Samsung main Drivers - Google's USB SDK drivers - and the newest version of android-sdk)
Also made sure that my USB-debugging was set on my phone.
Even if I put my phone in fastboot mode, it doesn't recognize it anymore. Which is weird because just last night it worked perfectly fine when I upgraded my recovery. I am frustrated to no end...... Can anyone else tell me what I might be missing here?
Nobody?
hxdrummerxc said:
So I have had my Galaxy Nexus since the day it came out, I rooted it before I even activated it.
Like many, I have used all sorts of different ROMs over the year period.
I have never had any problems with adb or anything. I have pushed and pulled files and all of that numerous times.
Until yesterday, I finally upgraded my recovery from an really old (first touch based recovery) to the newest TWRP. It worked fine. I put my phone into fastboot mode, and was able to flash the new recovery through the command prompt (adb/fastboot) on my PC. Then I switched to a new 4.2 rom (Paranoid android 2.99)
So today, I wanted to try some editing on some system files, so I went to go pull some files off of the phone (using adb of course), but now it just tells me that my device is offline.
I tried
"adb kill-server"
"adb start-server"
"adb devices"
It lists my device number, but just says "offline"
I tried to update everything. (Samsung main Drivers - Google's USB SDK drivers - and the newest version of android-sdk)
Also made sure that my USB-debugging was set on my phone.
Even if I put my phone in fastboot mode, it doesn't recognize it anymore. Which is weird because just last night it worked perfectly fine when I upgraded my recovery. I am frustrated to no end...... Can anyone else tell me what I might be missing here?
Click to expand...
Click to collapse
hxdrummerxc said:
Nobody?
Click to expand...
Click to collapse
only thing i can think of right now, before suggesting omap flash or odin, would be try a different usb port, another computer, another OS!
try installing the latest CWM recovery and see if it helps.
hxdrummerxc said:
So I have had my Galaxy Nexus since the day it came out, I rooted it before I even activated it.
Like many, I have used all sorts of different ROMs over the year period.
I have never had any problems with adb or anything. I have pushed and pulled files and all of that numerous times.
Until yesterday, I finally upgraded my recovery from an really old (first touch based recovery) to the newest TWRP. It worked fine. I put my phone into fastboot mode, and was able to flash the new recovery through the command prompt (adb/fastboot) on my PC. Then I switched to a new 4.2 rom (Paranoid android 2.99)
So today, I wanted to try some editing on some system files, so I went to go pull some files off of the phone (using adb of course), but now it just tells me that my device is offline.
I tried
"adb kill-server"
"adb start-server"
"adb devices"
It lists my device number, but just says "offline"
I tried to update everything. (Samsung main Drivers - Google's USB SDK drivers - and the newest version of android-sdk)
Also made sure that my USB-debugging was set on my phone.
Even if I put my phone in fastboot mode, it doesn't recognize it anymore. Which is weird because just last night it worked perfectly fine when I upgraded my recovery. I am frustrated to no end...... Can anyone else tell me what I might be missing here?
Click to expand...
Click to collapse
Try going to settings and look for something related to Root Access and it would have three options:
1. Apps only
2. ADB only
3. Apps & ADB
Choose the 3rd.
You might have to hunt the exact location under Settings where this option will be available as I don't remember them exactly.
Hit Thanks, if this helps...
I looked, but I don't see those settings anywhere.
I tried multiple USB port's. Switching from my USB 3.0 ports to my 2.0 ports. nothing. I can still access the phone storage. So I know it is still connecting to the PC. I could try to boot up linux, but I don't have any of the driver's and sdk tools on my linux drive, and from what I heard it was hard to get it all running in linux.
I guess I could try to change recoveries from TWRP to the newest CWMR,
but last time I turned my phone off, put it in fastboot mode, adb didn't recognize it. So im assuming it won't let me flash anything. Unless fastboot sees it but adb doesn't?
I mean my phone is working perfectly fine, running the new recovery and rom. But I have to be able to connect to adb. Not only for modding but in case of an emergency where I would need to flash.
hxdrummerxc said:
I looked, but I don't see those settings anywhere.
I tried multiple USB port's. Switching from my USB 3.0 ports to my 2.0 ports. nothing. I can still access the phone storage. So I know it is still connecting to the PC. I could try to boot up linux, but I don't have any of the driver's and sdk tools on my linux drive, and from what I heard it was hard to get it all running in linux.
I guess I could try to change recoveries from TWRP to the newest CWMR,
but last time I turned my phone off, put it in fastboot mode, adb didn't recognize it. So im assuming it won't let me flash anything. Unless fastboot sees it but adb doesn't?
I mean my phone is working perfectly fine, running the new recovery and rom. But I have to be able to connect to adb. Not only for modding but in case of an emergency where I would need to flash.
Click to expand...
Click to collapse
I understand your situation... Since you were not able to locate the option suggested, a little Googling answered it's location, check for same and confirm:
Settings > developer options > root access > apps and adb
This should hopefully help resolve the issue.
Hit Thanks, if it helps.
freezer2000 said:
I understand your situation... Since you were not able to locate the option suggested, a little Googling answered it's location, check for same and confirm:
Settings > developer options > root access > apps and adb
This should hopefully help resolve the issue.
Hit Thanks, if it helps.
Click to expand...
Click to collapse
hi. i try all this ways. i know that my usb debuging have problem, in development option i'll checked this, and it says enable. but infact it's not enable and still i got device offline error.
also i use z4root app and when i touch on root, it says that rooting need usb debuging enable (please enable it)!!
then move me to development setting to enable that, but this was checked and enable.
is any way that we make device online from my phone? for example using terminal emulator to turn on usb debuging or turn it off. this way is only my way! any one know some trying this?
i also use usb debugger app, but it move me in settings too! LOL
i need enable my device to root that.
thanks every one
I know this is an old topic, but if somebody else googles it, I had that offline issue, the solution was to upgrade adb : http://stackoverflow.com/questions/10680417/error-device-offline
You simply need to upgrade to the latest version of adb. Went thru this a few weeks ago.
I've previously managed to get my tokenID from htcdev without any problems on various handset but lately I've come across a few issues.
For example I'm trying to unlock the bootloader for this DesireHD but when trying to get the tokenID I get an error saying no devices attached.
My computer has installed the correct drivers and it shows up on device manager. I am able to 'adb devices' when the handset has booted up but when in fastboot / bootloader nothing comes up when running the same command.
Is it something to do with my Android SDK folder?
Is there a way to come around this because if I want to do similar process with other devices I need to understand what I need to do before.
Thanks
Schizophonic said:
I've previously managed to get my tokenID from htcdev without any problems on various handset but lately I've come across a few issues.
For example I'm trying to unlock the bootloader for this DesireHD but when trying to get the tokenID I get an error saying no devices attached.
My computer has installed the correct drivers and it shows up on device manager. I am able to 'adb devices' when the handset has booted up but when in fastboot / bootloader nothing comes up when running the same command.
Is it something to do with my Android SDK folder?
Is there a way to come around this because if I want to do similar process with other devices I need to understand what I need to do before.
Thanks
Click to expand...
Click to collapse
Adb does not work in bootloader, just with a fully booted device. You have to use fastboot command in fastboot usb
So when I originally got my OP3 and rooted it, installed a recovery and installed SuperSu, I had basically no problems. Installed drivers I found on here and never had an issue. Today I found a guide on the OP forums to disable doze which I apparently need to do since certain notifications aren't working right. I plugged my phone in and tried to follow the instructions, listed here under push notification issues
https://forums.oneplus.net/threads/...3-guide-solutions-e-t-c.448097/#post-14886949
When typing in adb devices, my device shows offline. I have done numerous things to try and fix the issue which I will try to lay out here. Initially I didn't install adb or the drivers as the guide suggests, since I had already done that - but after things not working I did try that and that didn't help. Still receive the "offline" next to my serial number device. The device works fine, and I can see it and transfer files to it just fine in the MTP mode. I have also tried to "revoke" permissions like described in the youtube guide I found here https://www.youtube.com/watch?v=eSApv8NXqD4
However that didn't work either. I should note that even after revoking permissions and turning usb debugging on and off again, the phone never asks me to authorize my computer as it does in that guide. In fact I don't believe it ever asked me to authorize my computer even when I first got the device. I don't know if that is part of the issue or not. I have also used a different adb version since somewhere I found that you needed to use the newest version. The version I had was 1.32 and I found the newest here on the forums here http://forum.xda-developers.com/showthread.php?t=2317790 that it was 1.4 as the newest. That adb returns the same results.
I should also note that the guide I linked from oneplus never actually tells me to put the phone into fastboot mode to execute the command, so I tried it initially booted up, and then in fastboot thinking it was supposed to be executed there, however in fastboot mode the phone is not seen at all. adb devices returns nothing, and booted it returns offline mode. Please help me
Nobody?
Have you tried some of the suggestions on https://stackoverflow.com/questions/14993855/android-adb-device-offline-cant-issue-commands? I'm not really sure what the situation is like on Windows but first I'd ensure you've installed the latest official Android SDK just to rule out an issue with the version of ADB you're using. You could also try using ADB over WiFi.
Apart from that, you can probably get by without ADB for now. Just run the commands in a terminal emulator on the device and/or create an init script.
Hello people of the tech world,
Im going spastic over here trying to install Lineage OS on my Xperia.
I looked into 'wiki.lineageos' and 'android geek' and followed the steps....
I have unlocked bootloader, got the code, unlocked oem, downloaded ADB fastboot package (platform tools) from lineage website and (two other websites later on just in case there was a difference), I opened PowerShell from the folder where I unziped the platform tools and powershell says instead of "adb" I gotta write .\adb.... after that a whole buncha text comes out. I typed .\adb devices and it showed me a device. However after going into 'adb reboot bootloader' nothing else works, when I type 'fastboot devices' it says its waiting. When I try to add the code, it doesnt recognize anything.
My computer cmd doesnt register adb at all nor anything after that.
At this point I also have minimal a&f and I tried 15sec ADB which did nothing because it says it cannot find the path. So I tried going into Environment Variables and creating path with the copy/paste technique to the "user variable" AND "system variable" AND creating new paths in each and also paste into existing paths in each. Only thing I didnt try is to put paths everywhere in the same time! and each time I created a path I tried the 15sec adb and it kept saying theres no path.
Minimal ADB works nearly the same as PowerShell and it says the same thing.
Also in the meantime I downloaded Xperia Usb drivers and tried to install it but it has exclamation marks and atm I have no mental capacity to deal with it. It says code 10. and Im in code red >_<" .
In the device manager I see my Xperia under portable devices, and the connection between my phone and laptop works fine, even the Companion works.
Im using HP laptop, win 10 and my Xperia version is 9. Help pls.