Related
Motorola Defy Mini XT320/XT321 all-in-one script/utility
I've ported mattlgroff's DROIDRAZR all-in-one Script to the Motorola Defy Mini XT320/XT321. This will make life easier and it will do it for you.
Make sure you have fastboot mode if not please refer to this guide for fastboot but there is a fastboot checker in option 6 but it won't install fastboot for you.
Link: http://forum.xda-developers.com/showpost.php?p=36199694&postcount=3
Options available:
1. Root your Motorola Defy Mini XT320/XT321
2. Install 2nd-init/TWRP Recovery
3. Overclock installation
4. Unroot Device
5. Wipe Data/Factory Reset
6. Fastboot checker.
7. Exit Utility
Instructions:
NEW PACKAGE & instructions
1. Download the EXE file at http://www.mediafire.com/?c81fnrtrki65e9i
2. Double click on the exe.
3. Choose an option by entering a number from 1 to 7
OLD PACKAGE & instructions
1. Download package at [REMOVED OLD LINK]
Please Download the fixed package at http://www.mediafire.com/?krxtemrthsz5ier
EXE Version: http://www.mediafire.com/?0kwmx4whjj1ua8c
2. Extract the zip file making sure all the files are in the same place.
3. Click on the batch file named 'DefyMiniUtility.bat'
4. Choose an option by entering a number from 1 to 7.
Credits to:
- Bernd.Defy for overclock module and Guitwo2 for init.d script
- Guitwo2 and jkkk88 for TWRP and aweosomeabhjeet for 2nd-init
- DoOMLoRD for unroot script
- Mattlgroff for the original DROID RAZR all-in-one script
If anyone knows if I missed a member for the credits, please PM me. Thanks
Make sure press thanks if it works
Guys please don't repost it as your own work, otherwise I'll report it and you will get banned from XDA.
NOTE: If you have previously used the old EXE to install TWRP then please remove the old folders by using these instructions using cmd before using updated exe to install TWRP;
1.
Code:
adb shell
2.
Code:
su
3.
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock11 /system
4.
Code:
rm -R /system/bootmenu
Then use the updated exe to install TWRP.
NOTE: If you don't like TWRP, you can download Guitwo2's Permanent CWM at http://forum.xda-developers.com/attachment.php?attachmentid=1875373&d=1365682716
Temporary CWM Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1875299&d=1365680458
2nd-init does NOT work in CWM Recovery
Thanks to @Guitwo2 for CWM Recovery.
Instructions on how to install Permanent CWM Recovery:
1. Make sure stericson-busybox is installed
2. Put XT320_bootmenuV2.zip in the root of your sdcard
3. Reboot into fastboot mode by typing this command in cmd:
Code:
adb reboot bootloader
4. Then type this command in cmd:
Code:
fastboot boot recovery.img
5. Then use volume keys to navigate and power button to select option. Select install zip from sdcard, then select XT320_bootmenuV2.zip and select yes to install the zip file
6. Then reboot device by selecting reboot device now.
CWM 6 has a bug where it asks you to 'disable recovery flash' when you select reboot system now make sure you select NO or you will soft brick your device.
Changelog:
-v2 No need to mount /sdcard in CWM Recovery. Fixed TWRP installation issues.
-v2.0.1 Released an .exe version of script, to simplify installation
-v2.0.1.1 Fixed bootmenu.zip
This can install a custom recovery?
This can install a custom recovery?
Thank you
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
same problem... someone can fix it? please
fca.sjc said:
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
Click to expand...
Click to collapse
sfoot13 said:
same problem... someone can fix it? please
Click to expand...
Click to collapse
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Thanks
rootdefyxt320 said:
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Click to expand...
Click to collapse
Ty for the quickly answer.
Btw, my gsm network wasnt working after the root process. If the same thing happens to someone else, just do a master reset and it will work again.
pull command is working now
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
fca.sjc said:
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
Click to expand...
Click to collapse
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
rootdefyxt320 said:
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
Click to expand...
Click to collapse
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
sfoot13 said:
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
Click to expand...
Click to collapse
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
rootdefyxt320 said:
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
Click to expand...
Click to collapse
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
sfoot13 said:
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
Click to expand...
Click to collapse
I've released an .exe version of my script. This should work now .
Link: http://www.mediafire.com/?0kwmx4whjj1ua8c
Thank u bro and sorry but i can't overclock it to 700 =/
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
OFF TOPIC.
Congrats on your well deserved mention on the portal.
sfoot13 said:
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
Click to expand...
Click to collapse
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
rootdefyxt320 said:
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
Click to expand...
Click to collapse
:good: Working! Thank u so much, now i have CWM working on my defy mini, i'm really thankful, thanks again
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
sfoot13 said:
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
Click to expand...
Click to collapse
Looks like 97bootmenu deleted itself, please reinstall the CWM zip again and it should work.
EDIT: This root method has been outdated, see the newer guide instead https://forum.xda-developers.com/android/general/tutorial-root-oppo-f1s-flashtool-6-0-t3651220
Why I made this tutorial:
Recently some members claimed that KingRoot is not working for Oppo F1s(A1601) anymore, I assume it's because Kingroot uses cloud based root method, means Kingroot downloads root package and command from cloud and execute on your phone. Maybe the problem was caused by the change of their server, some configuration has been replaced? At this time, I still have a working root method working now, so I would like to share it with everyone Also, you can follow this guide to get rid of the superuser App from those android root exploit app and use SuperSU.
In short, this tutorial tells:
1.How to Root Oppo F1s(A1601) with KingoRoot.(Though cloud based root App Kingroot is not working at this period but KingoRoot the offline one is still working)
2.Though KingoRoot prevent you to switch to other superuser App, we can still replace it with SuperSU with few steps, no custom recovery needed.
****NOTE****
There're various version of KingoRoot apk over the Internet, use the APK version I provided at attachment can guarantee there're no unexpected errors.
The script to replace kingo root was based on the one here but with a little modification, I've added a infinite loop for the script because KingoRoot cause a force reboot(soft reset) right after you delete root from the app, I assume its because KingoRoot want to prevent you to replace it. A infinite loop can make sure the file copying action has been done before your phone reboot.
Steps to Root F1s and Install SuperSU:
1.Install android terminal from Google Play: https://play.google.com/store/apps/details?id=jackpal.androidterm
2.Download the attachment, extract the zip archive, you get an APK "KingoRoot.apk" and a folder "rmkingo", copy the APK and the folder to your Internal storge(Sdcard)
3.Use any file management App to open KingoRoot.apk and install KingoRoot.apk
4.Open KingoRoot and click "one click root" then wait it to obtain root
5.After root succeeded, Open previous installed "Terminal Emulator for Android" and type
Code:
su
. Now KingoRoot's Superuser should pop up and ask you if you want to grant root access, allow it.
6.Now change terminal directory to the script folder, terminal type
Code:
cd /sdcard/rmkingo
7.Now execute the first script, terminal type
Code:
sh step0.sh
8.If there's no error on the previous action, Now proceed to execute the second script which is an infinite loop, you might see infinite error message after you executed it, terminal type
Code:
sh step1.sh
9.Now make sure the Terminal emulator is still open and the script is still running in background, just open SuperUser(installed by KingoRoot), find and click "Remove root" in the option of the App.
10.Your phone should be forced reboot now, after reboot, install SuperSU from google play: https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=zh_TW
11.Open SuperSU and update su binary file with normal mode and wait, it should finish in 2-3 minutes.
12.Hit thanks(My pleasure)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
above method has been confirmed working with the latest rom from my region,(date 2017/02/12 still working)
Rom: A1601_TW_11_A.17_161003
I am on build a1601ex_11_a27_170111
its currently letest update in india
sagargjasani264 said:
I am on build a1601ex_11_a27_170111
its currently letest update in india
Click to expand...
Click to collapse
Wow, Taiwan haven't receive any update since October........Looks like the rom of our region is terribly outdated,lol
A lot of people complaint on oppo forum of our region why there're no updates........
Is it method work for the rom from india?
evilhawk00 said:
wow, taiwan haven't receive any update since october........looks like the rom of our region is terribly outdated,lol
a lot of people complaint on oppo forum of our region why there're no updates........
Is it method work for the rom from india?
Click to expand...
Click to collapse
kingoroot is on 90% since last 20min
---------- Post added at 12:22 PM ---------- Previous post was at 12:10 PM ----------
sorry bro but kingoroot faild...
Sorry kingoroot failed error code : 0x196514
Lyes2 said:
Sorry kingoroot failed error code : 0x196514
Click to expand...
Click to collapse
Hi, I assume you have to downgrade your rom. Find a older version of your rom, flash it via OPPO stock recovery and this method will work.
In my region, Taiwan's newest rom date is 2016 October, so this method work. OPPO might fixed this CVE exploit in their new rom.
The rom I currently use can be downloaded from OPPO Taiwan website, however I'm not sure if it can work on your device, so you might need to find an older version of your region
You can try to get root with older firmware, flash twrp recovery with root app, such as rashr,then once you have twrp recovery, you can flash the new OTA update package, but be sure to modify the update package so you will not loose root after update. However, I think just stick with older firmware will be easier
Failed
Directory not found bro
evilhawk00 said:
Hi, I assume you have to downgrade your rom. Find a older version of your rom, flash it via OPPO stock recovery and this method will work.
In my region, Taiwan's newest rom date is 2016 October, so this method work. OPPO might fixed this CVE exploit in their new rom.
The rom I currently use can be downloaded from OPPO Taiwan website, however I'm not sure if it can work on your device, so you might need to find an older version of your region
You can try to get root with older firmware, flash twrp recovery with root app, such as rashr,then once you have twrp recovery, you can flash the new OTA update package, but be sure to modify the update package so you will not loose root after update. However, I think just stick with older firmware will be easier
Click to expand...
Click to collapse
what kind of modification do you exactly need to do to the update package to not loose root after update?
ngoralph said:
what kind of modification do you exactly need to do to the update package to not loose root after update?
Click to expand...
Click to collapse
I made one and got root with A27 , all you need is a twrp and a twrp flashable firmware zip.
Here's what I did,first I found that the TWRP by @BouyaPK did not have the same device model settings in comparison with the stock recovery, so I made a little modification to his TWRP image, now the offical firmware zip can pass Device detection test.
!!Before doing it , make sure you have flashed the modified recovery(the one from attachment) to your phone, official firmware is only flashable via this modified recovery and stock recovery
Download here
View attachment OPPO_F1s_twrp3.0_modified_devicemodel.zip
this is the example with the ota update package (A19 to A27 upgrade package around 150mb via coloros update manager app)
Now lets start to modify official firmware, follow my steps:
1.extract the newest official firmware zip.
2.now open the extracted folder, navigate to \META-INF\com\google\android\
3.find the file updater-script and open it with text editor( I suggest NotePad++)
4.you'll find a lot of lines start with apply_patch(xxxxx), remove the one with this file "/system/recovery-from-boot.p"
5.(if needed) also remove boot image sha1 check, in my case I have magisk installed, my boot image do not have the same sha1 value with stock boot image, so I found the line that checkes boot.img and remove it
6.done the file edit and save the file
7.repack it back to a zip file and sign the package with test keys
How to sign?
1.Download the sign package from attachment
2.have Java installed on your PC
3.Open a terminal at the same location with the keys and signapk.jar
4.terminal type
Code:
java -jar signapk.jar -w platform.x509.pem platform.pk8 my_modified_firmware.zip my_modified_firmware-signed.zip
8.install with twrp and you still have twrp exist, flash supersu zip or magisk zip
above is the way to modify a PATCH zip ota file, if you are modifying a full package, which may be easier,
the full package's update script write full image to phone instead, so you just need to modify the image in the ota package.
all you just have to make sure the new firmware do not replace twrp with stock recovery, so
1.try to extract the image in the package and modify the image file, remove files such as "recovery-from-boot.p" from the image then rebuild the image and calculate the new sha1 value of the new image(CarlivImageKitchen is a good tool to rebuild image)
2.replace the old sha1 hash in updater-script, repack and sign the zip.
3.flash with twrp
4.flash superSu zip or magisk zip after the firmware flash with twrp can get root.
evilhawk00 said:
I made one and got root with A27 , all you need is a twrp and a twrp flashable firmware zip.
Here's what I did,first I found that the TWRP by @BouyaPK did not have the same device model settings in comparison with the stock recovery, so I made a little modification to his TWRP image, now the offical firmware zip can pass Device detection test.
!!Before doing it , make sure you have flashed the modified recovery(the one from attachment) to your phone, official firmware is only flashable via this modified recovery and stock recovery
Download here
this is the example with the ota update package (A19 to A27 upgrade package around 150mb via coloros update manager app)
Now lets start to modify official firmware, follow my steps:
1.extract the newest official firmware zip.
2.now open the extracted folder, navigate to \META-INF\com\google\android\
3.find the file updater-script and open it with text editor( I suggest NotePad++)
4.you'll find a lot of lines start with apply_patch(xxxxx), remove the one with this file "/system/recovery-from-boot.p"
5.(if needed) also remove boot image sha1 check, in my case I have magisk installed, my boot image do not have the same sha1 value with stock boot image, so I found the line that checkes boot.img and remove it
6.done the file edit and save the file
7.repack it back to a zip file and sign the package with test keys
How to sign?
1.Download the sign package from attachment
2.have Java installed on your PC
3.Open a terminal at the same location with the keys and signapk.jar
4.terminal type
8.install with twrp and you still have twrp exist, flash supersu zip or magisk zip
above is the way to modify a PATCH zip ota file, if you are modifying a full package, which may be easier,
the full package's update script write full image to phone instead, so you just need to modify the image in the ota package.
all you just have to make sure the new firmware do not replace twrp with stock recovery, so
1.try to extract the image in the package and modify the image file, remove files such as "recovery-from-boot.p" from the image then rebuild the image and calculate the new sha1 value of the new image(CarlivImageKitchen is a good tool to rebuild image)
2.replace the old sha1 hash in updater-script, repack and sign the zip.
3.flash with twrp
4.flash superSu zip or magisk zip after the firmware flash with twrp can get root.
Click to expand...
Click to collapse
Can you send me a stock recovery for Oppo F1s or Color Os 3.0 version
[email protected]
I want ask to my friend to build the custom rom with latest version of TWRP.
Ananaqil12 said:
Can you send me a stock recovery for Oppo F1s or Color Os 3.0 version
[email protected]
I want ask to my friend to build the custom rom with latest version of TWRP.
Click to expand...
Click to collapse
If you want stock recovery image, check my reply here https://forum.xda-developers.com/showpost.php?p=71006625&postcount=26
evilhawk00 said:
I made one and got root with A27 , all you need is a twrp and a twrp flashable firmware zip.
Here's what I did,first I found that the TWRP by @BouyaPK did not have the same device model settings in comparison with the stock recovery, so I made a little modification to his TWRP image, now the offical firmware zip can pass Device detection test.
!!Before doing it , make sure you have flashed the modified recovery(the one from attachment) to your phone, official firmware is only flashable via this modified recovery and stock recovery
Download here
View attachment 4137856
this is the example with the ota update package (A19 to A27 upgrade package around 150mb via coloros update manager app)
Now lets start to modify official firmware, follow my steps:
1.extract the newest official firmware zip.
2.now open the extracted folder, navigate to \META-INF\com\google\android\
3.find the file updater-script and open it with text editor( I suggest NotePad++)
4.you'll find a lot of lines start with apply_patch(xxxxx), remove the one with this file "/system/recovery-from-boot.p"
5.(if needed) also remove boot image sha1 check, in my case I have magisk installed, my boot image do not have the same sha1 value with stock boot image, so I found the line that checkes boot.img and remove it
6.done the file edit and save the file
7.repack it back to a zip file and sign the package with test keys
How to sign?
1.Download the sign package from attachment
2.have Java installed on your PC
3.Open a terminal at the same location with the keys and signapk.jar
4.terminal type
Code:
java -jar signapk.jar -w platform.x509.pem platform.pk8 my_modified_firmware.zip my_modified_firmware-signed.zip
8.install with twrp and you still have twrp exist, flash supersu zip or magisk zip
View attachment 4137905
above is the way to modify a PATCH zip ota file, if you are modifying a full package, which may be easier,
the full package's update script write full image to phone instead, so you just need to modify the image in the ota package.
all you just have to make sure the new firmware do not replace twrp with stock recovery, so
1.try to extract the image in the package and modify the image file, remove files such as "recovery-from-boot.p" from the image then rebuild the image and calculate the new sha1 value of the new image(CarlivImageKitchen is a good tool to rebuild image)
2.replace the old sha1 hash in updater-script, repack and sign the zip.
3.flash with twrp
4.flash superSu zip or magisk zip after the firmware flash with twrp can get root.
Click to expand...
Click to collapse
There are no lines that say apply patch
diosdetiempo said:
[/HIDE]
There are no lines that say apply patch
Click to expand...
Click to collapse
As I mentioned, only the small OTA Update package(smaller than 300MB) extracted from Built in update manager App has the line apply patch.
You are using a full package which is another situation.
If you have the full ota firmware downloaded from official website, you can try the follow steps
1.first make a nandroid backup of the old 5.1, make sure you can always restore your phone with backup
2.flash the official firmware zip with the twrp I attach( if any error occurred,do not reboot ,restore your phone with nandroid backup, also write down the error, and see which image file does not have the match SHA1, calculate and modify the sha1 of that line)
3.if step 2 succed ,do not reboot flash superSU zip file
4reboot, you may have superSU and your twrp may be replaced by stock recovery, use rashr flash twrp back again since you have root
evilhawk00 said:
As I mentioned, only the small OTA Update package(smaller than 300MB) extracted from Built in update manager App has the line apply patch.
You are using a full package which is another situation.
If you have the full ota firmware downloaded from official website, you can try the follow steps
1.first make a nandroid backup of the old 5.1, make sure you can always restore your phone with backup
2.flash the official firmware zip with the twrp I attach( if any error occurred,do not reboot ,restore your phone with nandroid backup, also write down the error, and see which image file does not have the match SHA1, calculate and modify the sha1 of that line)
3.if step 2 succed ,do not reboot flash superSU zip file
4reboot, you may have superSU and your twrp may be replaced by stock recovery, use rashr flash twrp back again since you have root
Click to expand...
Click to collapse
It worked!
Here's a little guide
1) Put your TWRP, SuperSU and Android 6.0 Oppo F1S ROM onto SD card
2) Use Flashify to flash TWRP
3) Reboot into TWRP recovery
4) Flash Android 6.0 F1S ROM
5) Flash SuperSU
6) Reboot phone and you should be good to go
evilhawk00 said:
As I mentioned, only the small OTA Update package(smaller than 300MB) extracted from Built in update manager App has the line apply patch.
You are using a full package which is another situation.
If you have the full ota firmware downloaded from official website, you can try the follow steps
1.first make a nandroid backup of the old 5.1, make sure you can always restore your phone with backup
2.flash the official firmware zip with the twrp I attach( if any error occurred,do not reboot ,restore your phone with nandroid backup, also write down the error, and see which image file does not have the match SHA1, calculate and modify the sha1 of that line)
3.if step 2 succed ,do not reboot flash superSU zip file
4reboot, you may have superSU and your twrp may be replaced by stock recovery, use rashr flash twrp back again since you have root
Click to expand...
Click to collapse
update: the only issue i find is that SIM card isn't recognized
diosdetiempo said:
update: the only issue i find is that SIM card isn't recognized
Click to expand...
Click to collapse
sim card not recognized!? Sorry I can't really understand the reason of that because I don't have this problem.
Just a thought, maybe you lost baseband? Can you see your phone's IMEI number in settings? If you found null IMEI, that means you have lost your baseband, otherwise that's just something else maybe a small unknown issue, may also be the access point and protocol was not included in the 6.0 rom
If you lost your IMEI, I assume you already did the nandroid backup before, in twrp backup of NVRAM is the IMEI part, you should be able to recover your IMEI with that nvram backup
evilhawk00 said:
sim card not recognized!? Sorry I can't really understand the reason of that because I don't have this problem.
Just a thought, maybe you lost baseband? Can you see your phone's IMEI number in settings? If you found null IMEI, that means you have lost your baseband, otherwise that's just something else maybe a small unknown issue, may also be the access point and protocol was not included in the 6.0 rom
If you lost your IMEI, I assume you already did the nandroid backup before, in twrp backup of NVRAM is the IMEI part, you should be able to recover your IMEI with that nvram backup
Click to expand...
Click to collapse
have you tested with 6.0?
evilhawk00 said:
I made one and got root with A27 , all you need is a twrp and a twrp flashable firmware zip.
Here's what I did,first I found that the TWRP by @BouyaPK did not have the same device model settings in comparison with the stock recovery, so I made a little modification to his TWRP image, now the offical firmware zip can pass Device detection test.
!!Before doing it , make sure you have flashed the modified recovery(the one from attachment) to your phone, official firmware is only flashable via this modified recovery and stock recovery
Download here
View attachment 4137856
this is the example with the ota update package (A19 to A27 upgrade package around 150mb via coloros update manager app)
Now lets start to modify official firmware, follow my steps:
1.extract the newest official firmware zip.
2.now open the extracted folder, navigate to \META-INF\com\google\android\
3.find the file updater-script and open it with text editor( I suggest NotePad++)
4.you'll find a lot of lines start with apply_patch(xxxxx), remove the one with this file "/system/recovery-from-boot.p"
5.(if needed) also remove boot image sha1 check, in my case I have magisk installed, my boot image do not have the same sha1 value with stock boot image, so I found the line that checkes boot.img and remove it
6.done the file edit and save the file
7.repack it back to a zip file and sign the package with test keys
How to sign?
1.Download the sign package from attachment
2.have Java installed on your PC
3.Open a terminal at the same location with the keys and signapk.jar
4.terminal type
Code:
java -jar signapk.jar -w platform.x509.pem platform.pk8 my_modified_firmware.zip my_modified_firmware-signed.zip
8.install with twrp and you still have twrp exist, flash supersu zip or magisk zip
View attachment 4137905
above is the way to modify a PATCH zip ota file, if you are modifying a full package, which may be easier,
the full package's update script write full image to phone instead, so you just need to modify the image in the ota package.
all you just have to make sure the new firmware do not replace twrp with stock recovery, so
1.try to extract the image in the package and modify the image file, remove files such as "recovery-from-boot.p" from the image then rebuild the image and calculate the new sha1 value of the new image(CarlivImageKitchen is a good tool to rebuild image)
2.replace the old sha1 hash in updater-script, repack and sign the zip.
3.flash with twrp
4.flash superSu zip or magisk zip after the firmware flash with twrp can get root.
Click to expand...
Click to collapse
ok got it to work for a full firmware package here's what i did
1 . downloaded a27 (still 5.1 since 6.0 is not stable according to some)
2. using the twrp above flashed a27
3. flashed magisk
4. flash the twrp image again to make sure that incase it was overwritten by the update
NOTE: i did get an error like unable to mount dev/block/platform/...... it was fine for me
ngoralph said:
ok got it to work for a full firmware package here's what i did
1 . downloaded a27 (still 5.1 since 6.0 is not stable according to some)
2. using the twrp above flashed a27
3. flashed magisk
4. flash the twrp image again to make sure that incase it was overwritten by the update
NOTE: i did get an error like unable to mount dev/block/platform/...... it was fine for me
Click to expand...
Click to collapse
6.0 would work if the sim card issue could be fixed. i can't work it out :/
diosdetiempo said:
6.0 would work if the sim card issue could be fixed. i can't work it out :/
Click to expand...
Click to collapse
did you try restoring the nvram using twrp as stated before?
and did you wipe your data before flashing?? i think the transition from 5.1 to 6.0 may have broke some things read about it somewhere that wiping was necessary for LP to MM
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
remember i have not .zip file in media folder
Mr Hassan said:
hello ,
how can i remove starting verizon logo??? and i don,t want any other logos,
i just need like stock samsung boot, for note 4
Click to expand...
Click to collapse
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
-spektor- said:
You can use a app like this: https://play.google.com/store/apps/details?id=tkstudio.sboot to change boot animation or some ROMS like jasmine rom 7.0 have the original samsung logo boot sequence, for the app to work you need root and read carefully before doing anything. Hope this helps.
Click to expand...
Click to collapse
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Mr Hassan said:
thanks brother for reply i fixed this problem, now i,m in another project , i successfully extract the system,img,ext file,,,,now i edited somethings,
now i want to create again in same file, img,ext4
have you any idea about it?
Click to expand...
Click to collapse
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
-spektor- said:
Well if you mean like accessing and editing system files I'm not how to do edit them but I know that you can use a app like root explore: https://play.google.com/store/apps/details?id=com.speedsoftware.explorer that's the free version the paid one is $3.99 in the US. With that you can move and add files to system folder you can edit permission of files and things of that nature.
Click to expand...
Click to collapse
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Mr Hassan said:
ok brother thanks alot,
but i,m talking about stock rom, i already extracted and edit now its need to repack again
Click to expand...
Click to collapse
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
-spektor- said:
Ah ok, so I found these two threads related to the subject one is for repackaging ODIN files if your using a Samsung: https://forum.xda-developers.com/showthread.php?t=2549712&page=5 and the other is a general tutorial on custom roms https://forum.xda-developers.com/showthread.php?t=2195858 Also this article covers mostly everything about creating and installing ROMS http://lazydroid.com/2011/03/howto-repack-and-sign-rom-image-update-zip-files/ I hope this information helps I do not know much about creating or repackaging roms
Click to expand...
Click to collapse
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Mr Hassan said:
ok again thanks,
i,m in samsung note 4 , and i found lot of threads to repack but not success, coz i,m counfuse about where i start?
and how, is that need just system folder or all file like hidden ,cache etc etc
Click to expand...
Click to collapse
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could help it deals with modifying samsung rom and flashing it. If you want to read more on it here's the link: http://android.stackexchange.com/questions/85703/modifying-samsung-rom-and-flashing-it-on-a-device if you wanted to remove apps or add custom apps to your phone you would modify system file.
But what I thought was important was this;
(I did not write this thread)
< "You should be able to use an archive program on PC and recompress to .tar, .gz, and others. Dont forget to re-sign the archive. Keep a copy of your untouched ROM until you have the modified ROM tested and running.
The ROMs are signed with a signature. When repacking if they don't get signed they will fail in flashing. This link will help explain it.
So basically after downloading the firmware you have to rename it so you can extract the files, change them as you need, recompress them again and re-sign them, so you can flash them using Odin." >
This thread was dealing with modifying CM rom;
< "There are multiple solutions available:
Re-Zip the Image
Advantage: You do it once, and can use the resulting image for multiple devices. That's what I did with CM7.2 for my Milestone 2. Easy enough to do:
create a temporary (empty) folder
unzip the zip file to it
remove unwanted *.apk files from /system/apps (be careful of what you remove, of course)
zip up the directory contents again
Using a graphical ZIP manager (like WinZip or the like), steps would be even easier:
open the zip file with the archive manager
remove the unwanted .apk files
if the ZIP manager requires it, save the manipulated zip
Manually cleanup after flashing, using the shell
This is what ce4 recommended in the comments. It requires you using a terminal emulator on your device:
Flash the image as-is
remove superfluous stuff from the system partition by hand (like rm /system/big/junk/example.mp4)
Manually cleanup after flashing, using other tools
Almost the same as the previous method, but a bit more user-friendly. Disadvantage: this won't do for superflous ringtones and the like:
Flash the image as-is
Use a tool like Titanium Backup or Root Uninstaller to remove unwanted system apps" >
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
-spektor- said:
Well system file is where all the data and software is at basically everything visible on the phone. Maybe this article could
Edit: this link explains the signature of the file: (from google) https://code.google.com/archive/p/zip-signer/
Click to expand...
Click to collapse
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Mr Hassan said:
yes brother i want to remove some apps,. in system
even some edits in bulid prop
and after repack it for odin , thats it,
i create zip and trying to install the via twrp, during installation in end its give some error like this
setup finish with error 7 etc etc
so i reboot ,.....its reboot normal but after boot base band is unknown
i,m working on verizon devise.
in very simple words i,m trying to create rom without verizon apps and some more edits
and that all work in stock rom
Click to expand...
Click to collapse
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
-spektor- said:
.
Click to expand...
Click to collapse
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Mr Hassan said:
Who its looking cool. I'll try tomorrow
But for now brother i want to know its remove the apps. OK and what about bulid.prop? I need to edit it also. And after edit i don't want root anymore .after edit i need in tar format
I know you think I'm made but i know it's possible
Click to expand...
Click to collapse
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
Ok apps done
Bulid done
Now final thing need . repack in ext4 format
I'll check these things tomorrow
-spektor- said:
For build.prop maybe this app could help https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor sorry for lack of knowledge on this subject I've never had to repack a rom before.
Click to expand...
Click to collapse
brother did you found anything for repack ext4 img?
Mr Hassan said:
brother did you found anything for repack ext4 img?
Click to expand...
Click to collapse
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
-spektor- said:
Have you tried this guide? https://forum.xda-developers.com/showthread.php?t=1588461
Click to expand...
Click to collapse
yes but its for linux , and for window 99% unsuccessfully rates , have you try in window ? this ?
now i,m in next step if you have the time so kindly share your experience
https://forum.xda-developers.com/android/help/repack-img-giving-error-odin-invalid-t3577719
Hmmmmm ? I think you want to change the boot animation (white Verizon logo red background? ) if so your gonna need to either need to flash a pre-made zip with Flashfire (can't seem to get it to apply from twrp) or your gonna need to manually copy into the appropriate directory (mount system directory r/w copy then change permissions of the file you copied to 644 and reboot) presumably with a root explorer though doable from terminal
---------- Post added at 07:47 PM ---------- Previous post was at 07:29 PM ----------
-spektor- said:
Ok so I may have found a solution for you it requires a pc and to download a program. You'll need your rom and any apps you would like to insert into it. The program is as simple as right click and delete for any apps you want to remove. The program is made by a developer on XDA named "_Logie" here's the link to the Web page: http://m.tech.firstpost.com/news-analysis/how-to-add-or-remove-apps-from-a-custom-rom-101986.html and the link to the program is on there or here's the direct link: http://www.solidfiles.com/d/da2dd6335d/
This program compiles the ROM into a .zip if you have TWRP recovery you could do a backup of your previous rom before flashing your current one because you'll have to completely wipe every main partition before flashing new rom to ensure you don't run into problems
Edit: backup system, data, and cache because those are the ones you'll need to wipe also before wiping them just in case I would remove any password that locks your phone because if you try to flash a new rom and fails and your left with the recovery file it'll mess up the password, fingerprints will be forget and backup password will be unchangeable and will require a factory reset to be able to change it.
Click to expand...
Click to collapse
Try flashing with flasfire enabling the option mount system r/w and use common paths (probably not necessary but won't hurt) I have had difficulty getting anything other than ROM and gapps to apply from twrp but flashfire seems to work . I'm thinking its due to the fact that flashfire flashes after boot loader and then resets prior to os load.
Hi,
i want to perform below things on my mi mix 2 :
1. Delete a CONF file located in /system/vendor/etc .
2. Have stock recovery and do not need root thereafter.
Is there any way i can do that like through adb or something so that i don't have to flash SUPERSU and root my phone. This deletion of system file is only a onetime activity and i do not need root on my phone.
Thanks in advance!
Hey Guys, you reply is awaited please. Whole purpose of above request is that if i root and delete that file, i need to flash full OTA everytime and delete that file again. So if without root i could delete that file, full OTA wouldn't need to be flashed.
you can try with adb in recovery, but you must have twrp
thriller76 said:
you can try with adb in recovery, but you must have twrp
Click to expand...
Click to collapse
Could you please list the commands /steps to do so.. I want to delete a file from system/vendor folder..
You must unlock bootloader, install twrp recovery, reboot to recovery and you can delete files from filemanager in recovery
TWRP 3.4 Can install OZIP directly now! U don't have to follow This post anymore !! Thank u !!
What is OZIP??
OZIP file is an oZip Compressed Data. OZip is a simple compression solution in Python.
OZIP file is an Oppo Smartphone Firmware Update. An OZIP file is an encrypted firmware archive used to distribute updates to Oppo(/Realme) smartphones.
Ozips are not directly installable from twrp or any other custom recovery*(though some device has the support). so for installing stock rom or revert to stock rom from custom rom u have to decrypt the ozip and make it a flashable zip for installing it via twrp or any other recovery.
Caution : I m not responsible if ur device got bricked during the flash or installation.A Full backup is extremely advised before tryng the stuff.
Needed Tools :
1 - A PC (Linux/WIndows) or Android WIth termux installed.
2 - Python 3+ installed
3 - Downloaded Ozip from https://www.realme.com/in/support/software-update
3 - Patience
Fow Windows User ::
*First Download Python3 From Here - https://www.python.org/downloads/
IMPORTANT Part for easy path solution!!!Mark the option!!!(follow the image)!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Then Install it !!
U can also install python3 in ur system variables Manually!!! . <<<<If u don't know how!!! pls GOOGLE it!
* Now goto this link : https://github.com/bkerler/oppo_ozip_decrypt
*Click on Clone or download then click Download zip.
*Extract the files from the zip into the folder where u kept ur ROM(OZIP) in pc.
Remember : The two .py files from the zip must be in same folder with the ozip.
*now run cmd/Command Prompt as admin.
* Change directory by using Cd into the location of the files and ozip . ("Cd <location of the ozip>")
* Now type
"pip3 install pycryptodome" press enter
and then
"pip3 install docopt".press enter.
*After completing installing both. Type "python ozipdecrypt.py filename.ozip"
Example : python ozipdecrypt.py RMX1801EX_11_OTA_0260_all_mnxKIJM5sz0H.ozip
*U will see something like this
Found correct AES key: 1CA21E12271335AE33AB81B2A7B14622
Decrypting...
*Wait for the decryption. After completing decrypt u will get the zip file with same name in the same folder.
For linux and Termux ::
With due respect to the Author of the script!
Just follow the link https://github.com/bkerler/oppo_ozip_decrypt
and Read the README.md section below!!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Other Realme model User also can use this tricks to get zip file for their device.
Please report if u get any error!!Thanks!!
I follow the guide and I got the error message below,
>>> pip3 install pycryptodome
File "<stdin>", line1
pip3 install pycryptodome
^
SyntaxError: invalid syntax
bywumc said:
I follow the guide and I got the error message below,
>>> pip3 install pycryptodome
File "<stdin>", line1
pip3 install pycryptodome
^
SyntaxError: invalid syntax
Click to expand...
Click to collapse
i think u missed the command below
pip3 install pycryptodome
install it then try again!!
Can i install the zip file to a bricked device?
cant find decrypt.py
sir, the decrypt.py was not included in the oppo_ozip_decrypt-master.zip. I am following your instruction to "Remember : The two .py files from the zip must be in same folder with the ozip." can you send me the link? my oppo f9 hangs during bootup and stocks in logo. I badly need to fix this since i cannot go out to service shop coz we are in total lockdown due to covid19. your help would mean a lot. thanks brods.
bonkz said:
sir, the decrypt.py was not included in the oppo_ozip_decrypt-master.zip. I am following your instruction to "Remember : The two .py files from the zip must be in same folder with the ozip." can you send me the link? my oppo f9 hangs during bootup and stocks in logo. I badly need to fix this since i cannot go out to service shop coz we are in total lockdown due to covid19. your help would mean a lot. thanks brods.
Click to expand...
Click to collapse
You have to download the files ... of course they are not included in the ROM
i decrypt it
You have to follow the instructions, step by step, trust me
bonkz said:
sir, the decrypt.py was not included in the oppo_ozip_decrypt-master.zip. I am following your instruction to "Remember : The two .py files from the zip must be in same folder with the ozip." can you send me the link? my oppo f9 hangs during bootup and stocks in logo. I badly need to fix this since i cannot go out to service shop coz we are in total lockdown due to covid19. your help would mean a lot. thanks brods.
Click to expand...
Click to collapse
the file downloaded from github link mentioned by the author above should contain these files:
.gitignore
README.md
ozipdecrypt.py
requirements.txt
if you have these files in your master zip downloaded from github then you are good to go .... make sure python is installed in your pc!!
and you will be using that "ozipdecrypt.py" for decrypting.
The syntax of the command is incorrect.
Hello sir.
I have this error line whenever i try ozipdecrypt.py.
Why it can be?
Ok i got it. There is no need <> after ozipdecrypt.py. Thanks.
Great tool, works fine for me. This could be easier while installing this on linux distro(Ubuntu for example) rather than on Windows. :good:
Help
Hey , after decrypting it gave me a normal file called not zip file please help
Riyad_ said:
What is OZIP??
OZIP file is an oZip Compressed Data. OZip is a simple compression solution in Python.
OZIP file is an Oppo Smartphone Firmware Update. An OZIP file is an encrypted firmware archive used to distribute updates to Oppo(/Realme) smartphones.
Ozips are not directly installable from twrp or any other custom recovery*(though some device has the support). so for installing stock rom or revert to stock rom from custom rom u have to decrypt the ozip and make it a flashable zip for installing it via twrp or any other recovery.
Caution : I m not responsible if ur device got bricked during the flash or installation.A Full backup is extremely advised before tryng the stuff.
Needed Tools :
1 - A PC (Linux/WIndows) or Android WIth termux installed.
2 - Python 3+ installed
3 - Downloaded Ozip from https://www.realme.com/in/support/software-update
3 - Patience
Fow Windows User ::
*First Download Python3 From Here - https://www.python.org/downloads/
IMPORTANT Part for easy path solution!!!Mark the option!!!(follow the image)!!!
*Then Install it !!
U can also install python3 in ur system variables Manually!!! . <<<<If u don't know how!!! pls GOOGLE it!
* Now goto this link : https://github.com/bkerler/oppo_ozip_decrypt
*Click on Clone or download then click Download zip.
*Extract the files from the zip into the folder where u kept ur ROM(OZIP) in pc.
Remember : The two .py files from the zip must be in same folder with the ozip.
*now run cmd/Command Prompt as admin.
* Change directory by using Cd into the location of the files and ozip . ("Cd <location of the ozip>")
* Now type
"pip3 install pycryptodome" press enter
and then
"pip3 install docopt".press enter.
*After completing installing both. Type "python ozipdecrypt.py filename.ozip"
Example : python ozipdecrypt.py RMX1801EX_11_OTA_0260_all_mnxKIJM5sz0H.ozip
*U will see something like this
Found correct AES key: 1CA21E12271335AE33AB81B2A7B14622
Decrypting...
*Wait for the decryption. After completing decrypt u will get the zip file with same name in the same folder.
For linux and Termux ::
With due respect to the Author of the script!
Just follow the link https://github.com/bkerler/oppo_ozip_decrypt
and Read the README.md section below!!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Other Realme model User also can use this tricks to get zip file for their device.
Please report if u get any error!!Thanks!!
Click to expand...
Click to collapse
Unknown AES key, reverse key from recovery first! any help on this the phone is locked and not rooted.
Riyad_ said:
What is OZIP??
OZIP file is an oZip Compressed Data. OZip is a simple compression solution in Python.
OZIP file is an Oppo Smartphone Firmware Update. An OZIP file is an encrypted firmware archive used to distribute updates to Oppo(/Realme) smartphones.
Ozips are not directly installable from twrp or any other custom recovery*(though some device has the support). so for installing stock rom or revert to stock rom from custom rom u have to decrypt the ozip and make it a flashable zip for installing it via twrp or any other recovery.
Caution : I m not responsible if ur device got bricked during the flash or installation.A Full backup is extremely advised before tryng the stuff.
Needed Tools :
1 - A PC (Linux/WIndows) or Android WIth termux installed.
2 - Python 3+ installed
3 - Downloaded Ozip from https://www.realme.com/in/support/software-update
3 - Patience
Fow Windows User ::
*First Download Python3 From Here - https://www.python.org/downloads/
IMPORTANT Part for easy path solution!!!Mark the option!!!(follow the image)!!!
*Then Install it !!
U can also install python3 in ur system variables Manually!!! . <<<<If u don't know how!!! pls GOOGLE it!
* Now goto this link : https://github.com/bkerler/oppo_ozip_decrypt
*Click on Clone or download then click Download zip.
*Extract the files from the zip into the folder where u kept ur ROM(OZIP) in pc.
Remember : The two .py files from the zip must be in same folder with the ozip.
*now run cmd/Command Prompt as admin.
* Change directory by using Cd into the location of the files and ozip . ("Cd <location of the ozip>")
* Now type
"pip3 install pycryptodome" press enter
and then
"pip3 install docopt".press enter.
*After completing installing both. Type "python ozipdecrypt.py filename.ozip"
Example : python ozipdecrypt.py RMX1801EX_11_OTA_0260_all_mnxKIJM5sz0H.ozip
*U will see something like this
Found correct AES key: 1CA21E12271335AE33AB81B2A7B14622
Decrypting...
*Wait for the decryption. After completing decrypt u will get the zip file with same name in the same folder.
For linux and Termux ::
With due respect to the Author of the script!
Just follow the link https://github.com/bkerler/oppo_ozip_decrypt
and Read the README.md section below!!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Other Realme model User also can use this tricks to get zip file for their device.
Please report if u get any error!!
Thanks!!
Click to expand...
Click to collapse
Really a helping post sar.....
This worked but had to delete compatibility.zip file inside
even though i managed it to get working wifi doesnot work now....
Hello I did everything as described but I don't get the .xml files that I need to flash
thats my problem
Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)
I have an oppo reno 2 chp1907
pleace help me thank you
Riyad_ said:
What is OZIP??
OZIP file is an oZip Compressed Data. OZip is a simple compression solution in Python.
OZIP file is an Oppo Smartphone Firmware Update. An OZIP file is an encrypted firmware archive used to distribute updates to Oppo(/Realme) smartphones.
Ozips are not directly installable from twrp or any other custom recovery*(though some device has the support). so for installing stock rom or revert to stock rom from custom rom u have to decrypt the ozip and make it a flashable zip for installing it via twrp or any other recovery.
Click to expand...
Click to collapse
......
Thank you. Flawlessly worked on X3 FW. Yet to check flashing as the unit it just one day old....
Done everything, nothing happened after the decrypt command on ozip file for oppo a1k
python ozipdecrypt.py RMX1831EX_11_OTA_0200_all_QrdLEyEpDpi6.ozip
So after executing this code, nothing happens
when I enter stage 3, ozip. the code can't appear, is there a solution sir
Devices Realme XT
Thank you, may God help you fix your problems.
Big thanks to this guide. I'm in Win7 32bit. The cmd prompt with admin failed to install "pip3 install *****." so here is what I did. In the folder of the ROM and the ozipdecrypt, I used shift and left click(mouse), then chose "open command window here". then proceeded with the installation and decrypt instructions. Then I was able to achieve the zip file.
Hope this helps others with Win7 systems. Cheers