Develop Bugs

[BUG] Screen Sensitivity Issue-Lag (4.0.4-4.1.x)

Problem summary
Known cause (might be others): selecting an app from the Recents list (Task Switcher)
Temporary fix: turn the screen off, then back on
Workaround: avoid using Recents list (you can use a 3rd party task switcher instead)
How to test: open Messaging, hit Home, hit Recents, select Messaging from the list. Your screen will be less sensitive until you turn the screen off and back on. You can view the pressure by going to Settings -> Developer Options -> turn on Pointer Location. This will allow you to see the Prs of each tap in your status bar. Normally your lightest taps that register will show anywhere from 0.28 to 0.32. However, after this bug is activated, you will mostly get values over 0.40 for your light taps. This is actually a very noticeable increase, especially when trying to type quickly.
Please report any other known methods to "activate" this bug. After re-assigning my Recents button to a 3rd party app (I'm using Simple Task Switcher), I haven't seen this bug at all. It seems that a couple of people have seen it produced by something other than Recents, but they haven't narrowed it down (or reliably reproduced it on purpose).
Please star this issue officially so Google can fix:
Link is http://code.google.com/p/android/issues/detail?id=29734
Note: Downloading & using Screen filter application from play store, with brightness set to

Your hands are really dirty or really dry. Try moisturizer or something.

Been using my screen for almost hour straight now. No issues.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.

Hehe yes this s gonna be a difficult one to confirm. But it is definitely not dirty hands. To clarify, a quick press of the power button to lock then unlock completely fixes the issue. Same fingers suddenly register perfectly. This is driving me nuts as the phone is not even usable right now. Literally.

@rbiter said:
Been using my screen for almost hour straight now. No issues.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.
Click to expand...
Click to collapse
ios 6.2 doesnt get issues.

I don't know about your other experiences, but as far as the browser goes I have the same scrolling effects as you do. I think this is how it is meant to be. They tightened the scrolling a lot and I kinda like it. Before one small flick would send me across the whole page, which was kinda annoying. Just my preference.

I'm not having this problem. It would drive me crazy too. Been using my phone alot over the past two days and I didn't run into this problem even after almost 1h of continuous surfing. Also a few checkpoints of Shadowgun didn't trigger it.
But you can confirm your problem if you enable "cursor position" in the dev options (hope that's what it 's called in english). "Prs" and "Size" should need a lot more than around 0.30-0.40 to register your touch if you have the problem you describe.

I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.

My wife had this issue once.
It was the third party launcher she was using.
I don't think its a matter of touch sensitivity dropping, its a matter of the system just being too slow to really work right.
It was ADW EX, fwiw.

kristovaher said:
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
Click to expand...
Click to collapse
Lol that is hilarious. You forgot the step where its the OS that actually processes the input data, so in that process, a ton of problems can arise.
And personally, since 4.0.4 I have also been experiencing a "similar" issue. When scrolling down (and only down), I experience a kind of "lag" like if it only registers the swipe movement half an inch lower. Its not a big deal, but still an issue.
Edit : What he explains as "pressing very hard" is most likely the fact that when you press harder you actually cover more surface, so the amount of extra input data can definitely impact the behavior.

I had issues for a few hours after the 4.0.4 update, where my softkey buttons weren't responding. Thankfully, it seems to be fine now, but it was a cause for concern.
Sent from my Galaxy Nexus

gokpog said:
I'm not having this problem. It would drive me crazy too. Been using my phone alot over the past two days and I didn't run into this problem even after almost 1h of continuous surfing. Also a few checkpoints of Shadowgun didn't trigger it.
But you can confirm your problem if you enable "cursor position" in the dev options (hope that's what it 's called in english). "Prs" and "Size" should need a lot more than around 0.30-0.40 to register your touch if you have the problem you describe.
Click to expand...
Click to collapse
Thank you my friend, I should have thought of this; now I have numbers to confirm this. So with cursor option enabled I can get down to 0.30, managed 0.28 once. However when the bug starts, I can confirm that I cannot get below 0.60. It just refuses to register that input for some reason.
I lock the screen, 1 second is all it takes, and now it registers down to 0.30 again and all touch works properly. Its almost like some type of memory leak issue is the way it feels to me. It only starts happening after a few min of use.
Its definitely an issue now that I can see the pressure numbers. The question is what the hell can I do about it. I flashed aokp29 with the latest 4.0.4 ota merged in, problem still occurs. I'm gonna try stock 4.0.2 or 4.0.1 just to see. Thanks.

I have never had much luck upgrading Linux versions. That's why I start fresh every time with Android. Lol
Sent from my Galaxy Nexus using Tapatalk

Before I start digging, anyone know specifically which driver controls the touch input? I'll try looking thru github.
Also I was on stock 4.0.1 prior to this. So this could be normal behavior for everyone but everybody is used to it since nobody stayed on 4.0.1 like me. Cause I can easily say this is difficult to notice if you aren't paying attention. The question is, why does locking the screen temporarily change it back...

I can confirm some of what you are saying..sometimes when I'm browsing the scrolling tightens up..I lock the phone then unlock it and it is smooth again..doesn't happen all the time tho..doesn't bother me but I've noticed it
Sent from my Galaxy Nexus using XDA

I can also confirm. This morning I found the Swiftkey was lagging on Facebook. Something like the phone did not receive the touch. Then I rebooted and now it is ok.
I did not get this issue on 4.0.2 and I don't install anything new on 4.0.4.
The way I installed 4.0.4 was from the official factory image, so my phone is fresh! I reinstalled all apps manually as well. Nothing fancy apps.

I know this is my first post, but I can definitely confirm this issue.
I use my Galaxy Nexus for development, so the screen is always on. The sensitivity goes down very quickly.
My phone was an International GNEX that I loaded the US firmware on and then I flashed the OTA 4.0.4 update.

kristovaher said:
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
Click to expand...
Click to collapse
Just to point out, the phone is all digital. It does not get an analog signal from touching the screen. Also to that point you said analog but then described digital with the 1 and 0

Has anyone affected tried going between 4.0.2 and 4.0.4? To check the possibility of a driver or some related value changing.
Also, if not fixed by going back to 4.0.2, this could be due to current leakage from somewhere causing the touch to not work properly. I've seen it on other capacitive touch devices, though mainly when a non-compatible charger is connected. When you shut the screen off, the charge causing the problem/interference with the touch is temporarily dissapated, but then comes back after you use it again. Probably very unlikely in this case, unless Google changed something in the touch driver that makes it more sensitive to interference, which in turn messes with actual input from fingers.

TechNoir said:
Has anyone affected tried going between 4.0.2 and 4.0.4? To check the possibility of a driver or some related value changing.
Also, if not fixed by going back to 4.0.2, this could be due to current leakage from somewhere causing the touch to not work properly. I've seen it on other capacitive touch devices, though mainly when a non-compatible charger is connected. When you shut the screen off, the charge causing the problem/interference with the touch is temporarily dissapated, but then comes back after you use it again. Probably very unlikely in this case, unless Google changed something in the touch driver that makes it more sensitive to interference, which in turn messes with actual input from fingers.
Click to expand...
Click to collapse
Its possible. I was on 4.0.1 so perhaps this issue originated in 4.0.2 but I never noticed since I didn't update then. I can add that I did multiple wipes and clean flashes, and also tried both aokp 28 and 29 (new 4.0.4 ota merged), and happened on both.
I'll post what I just sent to arbiter which gives more insight.
From my extra testing under normal use my light touches register 0.28-0.33. Especially on swipes, the end of the swipe registers 0.28 as the finger travel breaks contact with the screen giving that swipe extra input which pushes the swipe motion further extra boost. When the bug starts the touch swipe won't even break 0.38-0.40, and that extra swipe data is lost resulting in the end of the swipe data points being excluded and swipes travel half the distance.
This gets exacerbated on the keyboard when fast typing light pressed. Its so bad it frustrates my face off cause typing just ceases to be possible. Such a difficult issue to diagnose.
Click to expand...
Click to collapse
Yes my face literally flew off!

[Q] Touch sensitivity issue cause?

I've been reading through the previous threads and I'm still confused if the issue is hardware or software related. I have the AUO panel and have broken swipes, and times where I can't scroll properly. This has been going on a couple months now and it's getting on my last nerve since it's frequently happening when I need my phone to work properly. All this time I assumed it was software but a couple threads mentioned it was hardware. Trouble is, some people with the JDI screen also have issues so I don't understand. My question is, has anyone ruled out software by flashing an AOSP rom? I'd rather not send this to Sony if at all possible since they don't cross ship and I'd be without a phone.

I have rarely an issue with the touch screen, when swipe up or down, it doesn't swipe it acts like I've just touched (clicked) once the display. I think it is a software issue, because in my case, if I turn off the display wait for 2-3 seconds and turn it on, it works with no problems.
Can you point me please to other threads that have this issue in discuss?
Thank you!

Have you removed the asf from the screen and placed an actual screen protector on it? I found that this really helped with the weird screen issues.

I have a screen protector over the ASF. But that has nothing to do with my issue, because, like I said, when I turn the display off, wait 3 seconds, and on again everything is working normally.

vibecatalin said:
I have a screen protector over the ASF. But that has nothing to do with my issue, because, like I said, when I turn the display off, wait 3 seconds, and on again everything is working normally.
Click to expand...
Click to collapse
Yeah, I reboot usually and the issue temporarily goes away. Then it will come back a day or two later. I'm afraid to remove the ASF because I've read some issues with goes touches even with a screen protector. I just want the issue to be fixed... I was thinking of flashing a AOSP rom but wanted to see if anyone with that ROM had any trouble or not. Maybe the L update in January will fix things.
Here are the resources I've read on this issue:
http://talk.sonymobile.com/t5/Xperia-Z1-Compact/Touchscreen-loosing-touch-issue/td-p/580111
http://johnhaller.com/blog/2014-03-06--sony-xperia-z1-z1s-touch-screen-issue
http://forum.xda-developers.com/showthread.php?t=2770293

I have rarely that issue, like I said I just turn off the screen, and after 2-3 seconds turn it on and it's gone. I'm sure this is a software related issue.

If it helps at all, I never had the issue in the two weeks I tried an aosp rom. However the camera and battery life were a bit lacking so I'm back on a stock rom.

I haven't have the issue too in the past weeks, I've wiping cache and dalvik cache pretty often , because I've installed some system apps. Anyway I will really want to know the cause of this
L.E. I'm still on stock firmware.
L.E. 2 : The Glove mode function, in the Settings-Display menu has an application or something? Has a file redirected to it? Is there in the phone's system a file than can be edited or deleted or something for the glove mode function? Maybe we will find answers there.
I'm not sure that I've made myself understood with the question.

Ghost touches in upper third of screen

Hi.
My Z1C seems to have a similar case of faulty display as described in some other threads here, but actually a bit different. The phone is stock, not rooted, running 5.1.1
Whenever I do something, there are ghost touches in the upper quarter or third of the screen. They only happen when I am not touching the screen myself. It happens no matter what I do. When I browse internet, it clicks links, when I scroll contacts, it calls people, when I am on facebook it gives likes etc... It seems like the more demanding task the phone is performing, the more ghost touches.
I turned on the developer settings and the "show pointer location" option, which leaves track of the last touch on screen, so I can research the issue.
I found out that when the phone is on home screen, it happens very rarely or not at all - the track of my last touch stays until screen turns off.
When I jump into the touchscreen service test, it does not happen at all. I can draw a line around the whole screen and it stays higlighted indefinitely.
In lock screen, it also doesn't happen.
I tried it in Sketch and it confirmed what I thought, when I was just sketching, from time to time a dot appeared in the upper part of the screen, but when the phone was downloading or installing in the background, the screen literally had seizures. I touched and released and then a storm of dots started to appear around the top part of the screen. It stopped after 5+ seconds, and after another input from me, the screen got another fit, drawing more dots.
I don't have any experience, but I think that since the problem doesn't happen constantly and it doesn't even happen at all in test mode, it could be a SW mistake.
I have found this thread https://forum.xda-developers.com/showthread.php?t=2691849 and I'm willing to try, but 1) my phone is still under warranty and 2) I have never done a root so I am not too eager. Do you think I should try that? Or has anyone found another solution for this problem?
Thanks.

Slivovidze said:
Hi.
My Z1C seems to have a similar case of faulty display as described in some other threads here, but actually a bit different. The phone is stock, not rooted, running 5.1.1
Whenever I do something, there are ghost touches in the upper quarter or third of the screen. They only happen when I am not touching the screen myself. It happens no matter what I do. When I browse internet, it clicks links, when I scroll contacts, it calls people, when I am on facebook it gives likes etc... It seems like the more demanding task the phone is performing, the more ghost touches.
I turned on the developer settings and the "show pointer location" option, which leaves track of the last touch on screen, so I can research the issue.
I found out that when the phone is on home screen, it happens very rarely or not at all - the track of my last touch stays until screen turns off.
When I jump into the touchscreen service test, it does not happen at all. I can draw a line around the whole screen and it stays higlighted indefinitely.
In lock screen, it also doesn't happen.
I tried it in Sketch and it confirmed what I thought, when I was just sketching, from time to time a dot appeared in the upper part of the screen, but when the phone was downloading or installing in the background, the screen literally had seizures. I touched and released and then a storm of dots started to appear around the top part of the screen. It stopped after 5+ seconds, and after another input from me, the screen got another fit, drawing more dots.
I don't have any experience, but I think that since the problem doesn't happen constantly and it doesn't even happen at all in test mode, it could be a SW mistake.
I have found this thread https://forum.xda-developers.com/showthread.php?t=2691849 and I'm willing to try, but 1) my phone is still under warranty and 2) I have never done a root so I am not too eager. Do you think I should try that? Or has anyone found another solution for this problem?
Thanks.
Click to expand...
Click to collapse
As You have warranty, I would strongly suggest that You go for a repair. I had the same issue in beginning, ghost touches appearing randomly, going away only after reboot. I was rooted and xposed, so went full stock without restoring any apps or data from internal storage, yet the problem remained, thus ruling out the point that it was software problem. And then after a week or so, that much part of screen stopped responding to touch entirely. You can see details over here, Another user had same problem as Mine and had the same end result,

OK then, I'll go for a repair. Thanks for the tip.

Slivovidze said:
OK then, I'll go for a repair. Thanks for the tip.
Click to expand...
Click to collapse
I am having exactly the same behaviour as you described .
Ghost touches happening on the upper part, and triggered when a demanding task is running.
Actually I didn't realized completely about this, I thought it was just random, but right now after I saw your post, I tried an app similar to Sketch while upgrading apps or playing a video in the background. And dots in the upper part start appearing crazily.
Did the phone repair solve your problem ? Mine is not in warranty, so I'll have to pay for it.
But also in my case, before this thing happened, I got some water damage and that upper quarter of the screen stopped responding.
After replacing screen+digitizer I got this very specific behaviour you described.

karamaz0v said:
I am having exactly the same behaviour as you described .
Ghost touches happening on the upper part, and triggered when a demanding task is running.
Actually I didn't realized completely about this, I thought it was just random, but right now after I saw your post, I tried an app similar to Sketch while upgrading apps or playing a video in the background. And dots in the upper part start appearing crazily.
Did the phone repair solve your problem ? Mine is not in warranty, so I'll have to pay for it.
But also in my case, before this thing happened, I got some water damage and that upper quarter of the screen stopped responding.
After replacing screen+digitizer I got this very specific behaviour you described.
Click to expand...
Click to collapse
In my case, I realized that I bought (probably) a badly re-fitted phone. Display's backlight was visible around screen panel edges, where I'd say it shouldn't be visible at all. I decided to return the phone and got a refund.
Sorry for not being able to help you.

Slivovidze said:
In my case, I realized that I bought (probably) a badly re-fitted phone. Display's backlight was visible around screen panel edges, where I'd say it shouldn't be visible at all. I decided to return the phone and got a refund.
Sorry for not being able to help you.
Click to expand...
Click to collapse
Ok. The aftermarket screen I got has that issue with the screen edges also. Very probable you are right.
In my case I water damaged myself. It seems that after 2 years of intensive use, waterproofing is gone, by accumulation of slight hits or so, never had a single crack on the screen. I read many posts reporting this happening, even with much less use time.
Too bad, I loved the phone, but I'm afraid that sending it to repair will mean to change the PCB or similar for a complete fix, which can come to a ridiculous price.
Seems it will be time to move on...

Yeah. If you want it fixed properly, you'd need to send it to Sony, and for the money it would cost you, you can probably gen a new phone. Sadly, similar phones aren't made anymore.

Top half inch screen not working

I have a HTC One m8 and the top half inch of the screen does not respond but occasionally it does sometimes for a little while. The top half inch generally tends to work when the battery is charged to 100% but sometimes that doesn't happen either. if it helps I use a tempered glass as a screen protector and the screen does not have any physical damage and it doesn't help when u boot into safe mode. I have also tried a hard reset.

Coincidentally i am working on a phone with the same problem (not mine). After a lot google research the owner decided to use another Launcher (Smart Launcher). This did not fix it entirely, if you are in Apps you can use the statusbar, but its not working on homescreen. I dont know why it behaves like that, but surprisingly many people get problems like that. I tend to believe that there is some software problem involved, because changing Launcher or using custom rom has been reported helpfull/fixing the problem (not allways tho..).
Now he had some other troubles with this phone and in the process i did a reset, that did not fix things as you said. I will install a custom rom next and will report back next week.

So i was wrong with saying a new lauchner solved the problem. Statusbar(sb) was accessible in home screen but not in app, said it wrong in the other comment. Now i had some time to test this and i can say that at least the phone i was working on is broken.
The top part does not recognize any touch input. The reason the sb showed some reactions is, that the launcher had a bigger trigger area (i guess), so you could pull it down. But still the top part was not responding. I tested it with stock, S-Rom and one Nougat Rom (dont remember), none of that showed an input in the top part.
Solution for now is different launcher or app that pulls down the bar. There are still some problems in daily usage, that this will not fix, so i guess its time for a new phone.

I am facing same problem. Is it any update which was pushed by HTC which makes the top 1 inch unresponsive ocassionally.. Indirectly, a marketing gimmick to push us by a new phone. So if it is really like that, who would buy a HTC phone again anticipating same problem again. Might go for Samsung (my own preference). huh !!!

My Redmi note 8 Global doesn't show the image centered.

Hello, i don't know if this is normal, or i'm just being nitpick but i've noticed on my new Redmi Note 8, that the image seems to be bigger by like 1 or 2 inches, it's like if the imagen doesnt fit on the screen and is cutoff in the left side, i noticed it with my G board keyboard with the Key Borders on, it practically doesn't have any border on the left side, also when i compare wthe whatsapp app with another android phone, everything is like cutoff like 1 or 2 inches in the left. When i use the screen capture button, it will show the full image with all the borders like it should be. is it a problem with the phone, or maybe with the Original global Rom? i'm not rooted and didn't make any changes because not sure if this is something with the OS or with the screen hardware. is there a way to center the image to fit the screen resolution?
thank you in advance!
Xiaomi Redmi Note 8 Global 4gb 64gb, with MIUI Global 11.0.4

Mine is normal, Im using xiaomi eu, but pretty sure im not noticing something like that in global rom before.
How about statusbar, is it the same thing or perfectly center? Is it in certain app only or what? Can you provide more details? What happens if you put your phone on landscape?
Are you using full screen tempered glass? Like Nillkin TG XD CD+MAX, the black frame on the side a little bit big, blocking the screen a little bit, not to crazy though.
Have you tried factory reset or reflash global rom? And also try disable miui optimization in developers setting and enable Show layout bounds to show the margins, see if your screen is crooked or not

arshy said:
Mine is normal, Im using xiaomi eu, but pretty sure im not noticing something like that in global rom before.
How about statusbar, is it the same thing or perfectly center? Is it in certain app only or what? Can you provide more details? What happens if you put your phone on landscape?
Are you using full screen tempered glass? Like Nillkin TG XD CD+MAX, the black frame on the side a little bit big, blocking the screen a little bit, not to crazy though.
Have you tried factory reset or reflash global rom? And also try disable miui optimization in developers setting and enable Show layout bounds to show the margins, see if your screen is crooked or not
Click to expand...
Click to collapse
i noticed the "issue" even in the status bar, it's a little cut off by the left side, that's what made me wonder about the full screen glass thing, i'm think that could be it, because the seller installed it and it's a little to the right, i guess i will have to take it to him and make him to remove it (i doubt it could be reinstalled without ruin it) . i can't see those border with naked eye though. i didn't tried another rom or reflashing the global rom, didn't want to lose the warranty
by the way entering into the developer option to look after Show layout and testing it, when i returned to settings i noticed that whatsapp stopped syncing. it says "sync is currently experiencing problems" and all my contacts' names on whatsapp disappeared, first time seeing this problem, had to clear all data and reinstall again. maybe i pressed an option that didn't have to be selected on developer option? right now i only have selected/ON "developer options, automatic systems updates, thethering hardware acceleration, turn on miui optimization and notify about high-risk feature (which showed me a warning when i used the show layout option, didn't know it was a high risk option)"
thank you very much, so far i'm loving this phone

rickastillo said:
i noticed the "issue" even in the status bar, it's a little cut off by the left side, that's what made me wonder about the full screen glass thing, i'm think that could be it, because the seller installed it and it's a little to the right, i guess i will have to take it to him and make him to remove it (i doubt it could be reinstalled without ruin it) . i can't see those border with naked eye though. i didn't tried another rom or reflashing the global rom, didn't want to lose the warranty
by the way entering into the developer option to look after Show layout and testing it, when i returned to settings i noticed that whatsapp stopped syncing. it says "sync is currently experiencing problems" and all my contacts' names on whatsapp disappeared, first time seeing this problem, had to clear all data and reinstall again. maybe i pressed an option that didn't have to be selected on developer option? right now i only have selected/ON "developer options, automatic systems updates, thethering hardware acceleration, turn on miui optimization and notify about high-risk feature (which showed me a warning when i used the show layout option, didn't know it was a high risk option)"
thank you very much, so far i'm loving this phone
Click to expand...
Click to collapse
That probaby it, just try to remove it, see if that really cause the problem
Do you know which tempered glass are you using? The brand name I mean, if the tempered glass off center, it will blocking the front camera, no? How about the redmi logo in the bottom, is it perfectly fit?
Dont worry, the options is right like it should be, and you can turn off the developer options. Idk about that sync problem though, I never experienced that before, probably because you turn off the miui optimization, which I know they reset the permission in some apps.

arshy said:
That probaby it, just try to remove it, see if that really cause the problem
Do you know which tempered glass are you using? The brand name I mean, if the tempered glass off center, it will blocking the front camera, no? How about the redmi logo in the bottom, is it perfectly fit?
Dont worry, the options is right like it should be, and you can turn off the developer options. Idk about that sync problem though, I never experienced that before, probably because you turn off the miui optimization, which I know they reset the permission in some apps.
Click to expand...
Click to collapse
The Logo is Centeres, and the tempered glass doesn't block the camera but i noticed it's not centered 100%, so i guess your deduction is right, must be those tempered glass with black borders. i would have to remove it ( don't know if those are the one that can be readjusted)
about the sync problem, has to remove those accounts and relog, now everything seems to work as they should.