Related
WIFI seems to perform excellent on this phone and works flawlessly at home. When at work though I have to toggle wifi on and off maybe 3 times an hour. Work uses EAP and I'm thinking this is the culprit. This is the first phone I've had this problem with. Like I said it doesn't do it at home which does not use EAP.
Anyone else experiencing anything similar? By the way I looked into the wifi region fix and didn't think it applied to this situation.
Without knowing more about how the wifi infrastructure is configured, it would be hard to pin point. There are quite a few people using EAP without issue. Can you give any more details?
Sent from my Galaxy Nexus using XDA App
I don't know what else to say. Without having access to even the location of the router I won't be able to gather much info. I work at a huge facility with router antennas sticking out of the ceiling. I most definitely won't be able to access the configuration settings of the routers either. I don't know what other info I can provide other than its EAP and I use a user name and password to log on
stupidslow02gt said:
I don't know what else to say. Without having access to even the location of the router I won't be able to gather much info. I work at a huge facility with router antennas sticking out of the ceiling. I most definitely won't be able to access the configuration settings of the routers either. I don't know what other info I can provide other than its EAP and I use a user name and password to log on
Click to expand...
Click to collapse
Logcat then you would know for sure. At least it may be some sort of indication
I have the same problem. My g2 would connect to the eap network at work fine, but my galaxy nexus does not with the same exact settings
Sent from my Galaxy Nexus using XDA App
Mine connects just fine on the first try but sometimes the internet just won't work. I'll show like 2-3 bars and they are blue but nothing works. Have to toggle wifi to get it back.
Maybe it has to do with me moving from one room to another and the connection drops with no indication? I can not for the life of me figure out how to use log cat! And I've tried many times in the past!
does someone found a solution to this issue?
I am also looking for a solution to get connected with my office wifi network
I'm still having this problem for the record. Different kernels and roms. Only happens at work.
Eap isn't fully supported except on master aosp.
adrynalyne said:
Eap isn't fully supported except on master aosp.
Click to expand...
Click to collapse
Sorry for my lack of knowledge but can you please explain more in detail what this means?
Unless someone compiles it into aosp from the master branch, you won't really have eap support. I am sure it will be in next ota.
adrynalyne said:
Unless someone compiles it into aosp from the master branch, you won't really have eap support. I am sure it will be in next ota.
Click to expand...
Click to collapse
It worked fine in Gingerbread. I wonder why they would remove it for ICS...
kcm117 said:
It worked fine in Gingerbread. I wonder why they would remove it for ICS...
Click to expand...
Click to collapse
I think it was a mistake, rather than intentional.
So no real solution for the moment...
It seems that changing some con wifi files can solve issue but i was not able to identify the good ones
Huck33 said:
So no real solution for the moment...
It seems that changing some con wifi files can solve issue but i was not able to identify the good ones
Click to expand...
Click to collapse
Any solution at all, even temporary would be great
Constantly having to enable and disable wifi to get my connection back is the only thing about his phone I can not stand.
Yes, even a temp solution will be great until it get fixed by Google..
---------- Post added at 12:36 PM ---------- Previous post was at 12:29 PM ----------
By the way the people on the below thread are successfully connecting to the WPA2 Enterprise network, may be we can get some help from this developer to resolve the issues on our Gnexus.
http://forum.xda-developers.com/showthread.php?t=1508118
lethalfriend said:
Yes, even a temp solution will be great until it get fixed by Google..
---------- Post added at 12:36 PM ---------- Previous post was at 12:29 PM ----------
By the way the people on the below thread are successfully connecting to the WPA2 Enterprise network, may be we can get some help from this developer to resolve the issues on our Gnexus.
http://forum.xda-developers.com/showthread.php?t=1508118
Click to expand...
Click to collapse
We are actually able to connect, it just doesn't maintain the connection sometimes
I am totally unable to connect with my office wifi network as it keep saying connecting nothing else... There must be a way to to fix this issue as I used to connect with my GSII on gingerbread rom without any issue.
lethalfriend said:
I am totally unable to connect with my office wifi network as it keep saying connecting nothing else... There must be a way to to fix this issue as I used to connect with my GSII on gingerbread rom without any issue.
Click to expand...
Click to collapse
Did you try EAP rather than WPA2?
does anyone else have this problem? I have the language pack enabled. I've tried it with and without personalized recognition. just doesn't seem to work. It happens when I'm online or offline randomly it seems.
If I'm using voice to text it will just show the microphone and just get to a picture of a microphone, never turns red, never says tap to talk.
same thing for me
phydo said:
does anyone else have this problem? I have the language pack enabled. I've tried it with and without personalized recognition. just doesn't seem to work. It happens when I'm online or offline randomly it seems.
If I'm using voice to text it will just show the microphone and just get to a picture of a microphone, never turns red, never says tap to talk.
Click to expand...
Click to collapse
was running fine last night but now its no longer working.
i did install some files today that may have broken it? (or server issue?) but i cant remember which programs i installed or i dont know how to reverse it.
let me know if you get a fix. i'd rather not format and reinstall everything again.
I've got a nexus 7 16GB, stock ROM, unlocked rooted, (was all this yesterday while it was working)
---------- Post added at 09:13 PM ---------- Previous post was at 08:51 PM ----------
wahooza said:
was running fine last night but now its no longer working.
i did install some files today that may have broken it? (or server issue?) but i cant remember which programs i installed or i dont know how to reverse it.
let me know if you get a fix. i'd rather not format and reinstall everything again.
I've got a nexus 7 16GB, stock ROM, unlocked rooted, (was all this yesterday while it was working)
Click to expand...
Click to collapse
not sure if this fixed it... uninstalled Tasker, rebooted and it started working again. (not sure if its the reboot, or tasker.... reinstalled tasker and its still working)...
.maybe the reboot
wahooza said:
was running fine last night but now its no longer working.
i did install some files today that may have broken it? (or server issue?) but i cant remember which programs i installed or i dont know how to reverse it.
let me know if you get a fix. i'd rather not format and reinstall everything again.
I've got a nexus 7 16GB, stock ROM, unlocked rooted, (was all this yesterday while it was working)
---------- Post added at 09:13 PM ---------- Previous post was at 08:51 PM ----------
not sure if this fixed it... uninstalled Tasker, rebooted and it started working again. (not sure if its the reboot, or tasker.... reinstalled tasker and its still working)...
.maybe the reboot
Click to expand...
Click to collapse
Interesting.
Sent from my Galaxy Nexus using Tapatalk 2
phydo said:
does anyone else have this problem? I have the language pack enabled. I've tried it with and without personalized recognition. just doesn't seem to work. It happens when I'm online or offline randomly it seems.
If I'm using voice to text it will just show the microphone and just get to a picture of a microphone, never turns red, never says tap to talk.
Click to expand...
Click to collapse
I noticed the same problem and read somewhere that you can download the "offline speech recognition" language pack to see some improvement. That didn't work for me but so far what seems to be working is changing the setting for "Choose input languages" by deselecting "Automatic" and selecting "English (US)" only. Not sure if this will fix the problem in the long term but for now it seems a lot more spiffy.
ferrari355f1 said:
I noticed the same problem and read somewhere that you can download the "offline speech recognition" language pack to see some improvement. That didn't work for me but so far what seems to be working is changing the setting for "Choose input languages" by deselecting "Automatic" and selecting "English (US)" only. Not sure if this will fix the problem in the long term but for now it seems a lot more spiffy.
Click to expand...
Click to collapse
Thanks for this. You know I've really meant to do some logcat work and see what it is but it seems to happen so randomly. My nexus seven doesn't do it. I'll let you know how it makes out in the long term
Sent from my Galaxy Nexus using Tapatalk 2
I've been having this same issue, but it only seems to happen when my phone is docked with Bluetooth on. I thought it possibly might be something to do with the phone trying to enable the Hands Free Profile for the voice input, but that's just a wild guess at this point. It comes right up when the phone is undocked/bluetooth off.
I also found this related issue:
http://code.google.com/p/android/issues/detail?id=35737
Wade-0 said:
I've been having this same issue, but it only seems to happen when my phone is docked with Bluetooth on. I thought it possibly might be something to do with the phone trying to enable the Hands Free Profile for the voice input, but that's just a wild guess at this point. It comes right up when the phone is undocked/bluetooth off.
I also found this related issue:
http://code.google.com/p/android/issues/detail?id=35737
Click to expand...
Click to collapse
Interesting also. I do use Bluetooth for a car - cell link. It will happen whether or not Bluetooth is connected, I know that much. As for if it only happens when Bluetooth is *enabled*, I don't know.
Sent from my Galaxy Nexus using Tapatalk 2
phydo said:
Interesting also. I do use Bluetooth for a car - cell link. It will happen whether or not Bluetooth is connected, I know that much. As for if it only happens when Bluetooth is *enabled*, I don't know.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Star this issue http://code.google.com/p/android/issues/detail?id=35737
Solved!
Still no fix coming from Google, but at least one nice guy made a temp fix while they do it.
Look for "Voice Command" app on Google Play. Developer's name is IT-DEV-CROWD or code(dot)google(dot)com/p/android/issues/detail?id=42178#c37
It worked for me, after trying a lot of different configurations.
RandomROM Official Issues Thread
This thread was designed for solving problems with the RandomROM Badass Edition
(Sense 3.5) and UltraBadass Edition (Sense 4.1 FULL). This is so my team and I can
address problems quicker and get notified when not on XDA. Thanks to @hollywoodsmokeshow
for his brilliant idea
What to acknowledge before posting (Important!)
Not to convince people not to use my ROM
Not to make up thick ideas on purpose
Not attempt to expose me for some thick idea
Not for fun and thanks
This is a SERIOUS thread
I will keep out as much support as I can, however I'm only available after 7PM (GMT)
Do not be impatient
No Bad Language
Follow ALL XDA rules
Don't be influential
reserved
reserved again
Something about this thread just doesn't sit right with me, I don't know whether its because you've asked this to be a serious thread yet you've titled it "troll out your problems here" or because of brilliant rules such as "don't be influential", nonetheless good luck, I guess this will be helpful for some.
Sent from my Hudl HT7S3 using Tapatalk 4
Trying to use the otg for trail camera pics off an sd card. Used "otg helper" and "stick mount" both with same result. Does not see a device to mount. No power to card reader (led indicator on reader). Piggy backed a second standard USB cable to use power from laptop to verif operation. If it worked I was going to get a portable power supply for use in the field.
Anyone been able to use the otg?
Any thought on on why my setup doesn't work?
Suggestions on things to try?
hollywoodsmokeshow said:
Trying to use the otg for trail camera pics off an sd card. Used "otg helper" and "stick mount" both with same result. Does not see a device to mount. No power to card reader (led indicator on reader). Piggy backed a second standard USB cable to use power from laptop to verif operation. If it worked I was going to get a portable power supply for use in the field.
Anyone been able to use the otg?
Any thought on on why my setup doesn't work?
Suggestions on things to try?
Click to expand...
Click to collapse
I remember having to enable USB OTG with an app like kernel tuner before running USB OTG helper, maybe that's the case for this ROM
Sent from my iPod touch using Tapatalk
Updated to 1.5.9. Still same issue. The new sd multi mount app on this version dosent even fire up. Error message unfortunately, sd multi mount has stopped. Will tr what Justice suggestted kernal tuner.
Tried a kernal tuner app. Didn't see an option to turn otg on. There is a lot of different things to adj. not gonna fiddle with anything until I know what things do. Do you recommend a specific app? What to look for in the app if its not plainly stated in the app?
Justice™ said:
Something about this thread just doesn't sit right with me, I don't know whether its because you've asked this to be a serious thread yet you've titled it "troll out your problems here" or because of brilliant rules such as "don't be influential", nonetheless good luck, I guess this will be helpful for some.
Sent from my Hudl HT7S3 using Tapatalk 4
Click to expand...
Click to collapse
By influential i mean dont troll out false sh|t about the rom to pees off people from using it
hollywoodsmokeshow said:
Tried a kernal tuner app. Didn't see an option to turn otg on. There is a lot of different things to adj. not gonna fiddle with anything until I know what things do. Do you recommend a specific app? What to look for in the app if its not plainly stated in the app?
Click to expand...
Click to collapse
Try flashing pacha's kernel or another sense ics kernel then try otg helper
Dr. Globbyglob said:
Try flashing pacha's kernel or another sense ics kernel then try otg helper
Click to expand...
Click to collapse
Pachas ics kernal link is inop.
hollywoodsmokeshow said:
Pachas ics kernal link is inop.
Click to expand...
Click to collapse
Tried here
http://forum.xda-developers.com/showthread.php?t=2129153
all links are working.
nlooooo said:
Tried here
http://forum.xda-developers.com/showthread.php?t=2129153
all links are working.
Click to expand...
Click to collapse
That link worked. Should I just run it thew cwm or manually boot in to recovery and clear cach, dalvic, etc like flashing a new rom?
hollywoodsmokeshow said:
That link worked. Should I just run it thew cwm or manually boot in to recovery and clear cach, dalvic, etc like flashing a new rom?
Click to expand...
Click to collapse
Just flash it from recovery with no wipe.
Flashed it, turned otg on in kernal tuner, used otg helper with spliced y cable getting power from an i book. Reader light up hooked to lap top and turns off within a few second of connecting phone. No device detected message.
---------- Post added at 01:09 PM ---------- Previous post was at 12:54 PM ----------
Just went back threw double checking my self. Found after applying otg on, immediately going back in to those options it was set to off. Tried multiple times with same result.
---------- Post added at 01:59 PM ---------- Previous post was at 01:09 PM ----------
Can't charge battery. Assuming a problem with compatability. Need to get back to original kernel.
hollywoodsmokeshow said:
Flashed it, turned otg on in kernal tuner, used otg helper with spliced y cable getting power from an i book. Reader light up hooked to lap top and turns off within a few second of connecting phone. No device detected message.
---------- Post added at 01:09 PM ---------- Previous post was at 12:54 PM ----------
Just went back threw double checking my self. Found after applying otg on, immediately going back in to those options it was set to off. Tried multiple times with same result.
---------- Post added at 01:59 PM ---------- Previous post was at 01:09 PM ----------
Can't charge battery. Assuming a problem with compatability. Need to get back to original kernel.
Click to expand...
Click to collapse
Try just otg as in no y cable n try otg helper. No pc cos hdd failed and no dhd I am the unluckiest person ever. I'm getting a hdd replacement but my dhd isn't back!!!
Seny from my HTC Wildfire S A510e using xda app-developers app
Nope that didn't work either. Tried just otg helper, just stick mount, kernal tuner with both kernel versions, with and without y cable. No device found in all scenarios. Now back to original Random Rom kernel. In kernel tuner with both kernel versions the turn on otg would not stay selected on. With patchas there was a fast charge option I selected to verify that a selection would stay as requested, which it did.
Does it hurt the phone to be flashing multiple packages?
Just changed plans and now i can text. Was just emailing before. I can recieve texts but camt send any.essage status "pending". So far after
2 hrs with at they dont know whats going on. Just thought i would ask if there was somthing i turned on (text blocking) that i dont rember and cant find within the rom.
Thanks
Got this from att yesterday.
AT&T Free Msg. Investigation completed No network issues found.Please have your sim and device tested at the AT&T store you guys have any ideas?
Fist I thought it was a modem related issue, flashed a new modem and all working for two months..
Then, after various nightly updates the problem is back again. Who have the no sound call issue on cyanogenmod firmware?
It is a kernel problem?
I created this thread to exchange ideas and maybe help @arco68 to fix the problem.
FIX
"Apparently low latency audio might be problematic on msm8960/msm8930 devices, and it seems that it's not enabled in Samsung stock rom either." @arco68
So, to fix you must delete theese lines from audio_policy.conf file:
Code:
fast {
sampling_rates 8000|11025|12000|16000|22050|24000|32000|44100|48000
channel_masks AUDIO_CHANNEL_OUT_STEREO
formats AUDIO_FORMAT_PCM_16_BIT
devices AUDIO_DEVICE_OUT_SPEAKER|AUDIO_DEVICE_OUT_EARPIECE|AUDIO_DEVICE_OUT_WIRED_HEADSET|AUDIO_DEVICE_OUT_WIRED_HEADPHONE|AUDIO_DEVICE_OUT_ALL_SCO|AUDIO_DEVICE_OUT_ALL_A2DP|AUDIO_DEVICE_OUT_AUX_DIGITAL|AUDIO_DEVICE_OUT_ALL_USB|AUDIO_DEVICE_OUT_FM|AUDIO_DEVICE_OUT_PROXY|AUDIO_DEVICE_OUT_FM_TX
flags AUDIO_OUTPUT_FLAG_FAST
}
The first two days after I installed cm12.1 I had some problems.But now all working flawlessly.I'm on 25-6 nighty
---------- Post added at 04:59 PM ---------- Previous post was at 04:58 PM ----------
21-6 nightly*
It may sound silly, but could you add a clear introductory description in your 1st post? Something like
On several i9195/i9190 with CM12.1, you cannot hear the caller/callee. It does not matter if you use the handset or rear speaker or a bluetooth headset.
The issue was confirmed with these modems:
* ...
* ...
Suspicious differences for people who aren't affected by this bug:
* ...
* ...
Click to expand...
Click to collapse
It must be possible to find some systematic differences between working and not working. After all, our hardware is identical, the software base as well. You should summarize the collected wisdom at your OP.
Disable the "OK Google" detection at Google Now settings worked for me so far.
I'm on 12.1-20150625-NIGHTLY-serranoletexx
If I use the built in voice recorder I immediately get the no sound issue. Maybe someone else can test that to see if it's a common trigger?
Sent from my GT-I9195 using XDA Free mobile app
I've tested this. Call sound is still alive at my phone after using the voice recorder.
niedergerner said:
I've tested this. Call sound is still alive at my phone after using the voice recorder.
Click to expand...
Click to collapse
I'm using UCNK1 modem, which one are you using?
Sent from my GT-I9195 using XDA Free mobile app
davidmlondon said:
I'm using UCNK1 modem, which one are you using?
Click to expand...
Click to collapse
I'm on UCOA2
Possible solution
Hi,
I had this problem 3 months ago for the first time and I have not been able to solve it with any ROM I've tried. Then someone suggested me to install the app Disable service and going to system services menu, uncheck "check in service" in the google services. It works!
Now the problem appears only 1 or 2 times a week... I think the matter is that sometimes the app disable service doesn't start automatically or can't obtain root permissions.
Try it... and good luck!
Frescobaldo said:
Hi,
I had this problem 3 months ago for the first time and I have not been able to solve it with any ROM I've tried. Then someone suggested me to install the app Disable service and going to system services menu, uncheck "check in service" in the google services. It works!
Now the problem appears only 1 or 2 times a week... I think the matter is that sometimes the app disable service doesn't start automatically or can't obtain root permissions.
Try it... and good luck!
Click to expand...
Click to collapse
Thanks for the advice. What does the check in service do ? I read that if you disable it Google now no longer works? Have you had any problems since disabling it?
Sent from my GT-I9195 using XDA Free mobile app
---------- Post added at 07:45 PM ---------- Previous post was at 07:45 PM ----------
niedergerner said:
I'm on UCOA2
Click to expand...
Click to collapse
And you have the no sound issue?
Sent from my GT-I9195 using XDA Free mobile app
I had the no-sound-issue with the UCOA2, too. I don't think updating the Radio helps to solve this problem in general.
I've testet the tip, to disable "Ceckinservice" previously, and first, it seems to work, but than the no-sound-issue appeared again.
About check in service
Hi DavidMLondon,
I don't know what google check in service does, but I don't use google now so I can't say if it's necessary for that or no. I had no general problem disabling check in service and as I said, before that I had the no sound in call problem every day (also two times....I mean 2 reboot needed), now I have it 1 or 2 times at week.... I don't know why...
I´m not sure this is caused by the same issue but maybe there is something into it.
So well I´m still on 5.0.2. It´s the latest release before Arne switched over to 5.1.1. Baseband is COC2.
By reading about your mic issues I wanted to check if my device is involved into it as well as I never had to deal with this issue. So Used the OK Google function first and then I called myself from a stationary phone. All was fine. Just later my wife called me and all I could hear is a horrible noise comming out of my speaker. The phone app crashed and keept crashing till I rebooted the device.
Then I disabled OK Google detection and all is fine so far. At least for normal calls. Just am experiencing something simmilar by making calls via Whatsapp. When the connection is bad and I´m getting the reconnect signal, my mic stops working when it gets reconnected again. It also keeps not to work when I finish the call and recall the person.
Now I'm on 30/06 nigthly and COD3 baseband and can't reproduce the issue, all working.
Does people have the no sound issue have disabled vibrations on soft touch buttons? This is the first time I left that enabled after a clean install and all works good.
96DANGER96 said:
Now I'm on 30/06 nigthly and COD3 baseband and can't reproduce the issue, all working.
Does people have the no sound issue have disabled vibrations on soft touch buttons? This is the first time I left that enabled after a clean install and all works good.
Click to expand...
Click to collapse
I always disable vibration on soft touch, I'm using 0706 with UCNK1.
Sent from my GT-I9195 using XDA Free mobile app
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
I just enabled vibrate on touch, used the voice recorder and then tried to call my land line and I didn't get the no sound problem. This is the first time I have used the voice recorder and not had the issue. I will continue to test and report back. Would be interested to know how many others disable vibrate on touch.
Sent from my GT-I9195 using XDA Free mobile app
Spoke too soon. Problem is back. I tested with voice recorder, voice search and Bluetooth and no sound issue returned this morning. Back to the drawing board
Sent from my GT-I9195 using XDA Free mobile app
Man! Please update your radio: Please check http://www.sammobile.com/firmwares/database/GT-I9195/ for the recent radio of your country , and download the radio-file over xda forums.
Then disable the "OK Google" detection and also disable Google play services' "checkinservice".
I had this issue today. i heard the first few words of the caller then the sound went intermittent 'robotic' for a sec and then it was silent. the next call as well. I rebooted i had no calls for an hour it worked after. but i had this on prev builds just didnt know it was my phone causing it, thought its the network maybe, but now im sure its not. im checking my baseband ver a bit later, and i might try to update it.
my current modem is I9195XXUBML4.
Hey people. I just made the move to 5.1.1 using Tipsy ROM available on Google+ and was suffering from similar issues like you lot. My calls would sometimes lose sound or drop or sound very distorted. I also had problems with Google voice search. I was using the latest modern COD3 from a stock kit Kat. But dev had no such issues. So I changed my modem to the one the ROM dev was using which was an older version xxucnk5 and all my phone call issues disappeared including Google voice search issues. Don't know of this helps anyone? Using i9195 LTE here.
If someone could test the following, that would be great.
http://review.cyanogenmod.org/#/c/102870/
Just mark out the fast section in your audio_policy.conf
I figured we should have a thread to discuss working on fixing mobile data on cdma E4's to keep the chatter out of the rom threads. @CodyF86 I'm able to get full signal bars and even get it to say sprint or boost for the carrier. I just can't get it to actually connect. I tried adding overlays for the radio access families: https://github.com/aaronmarch/andro...mmit/c9325b3a56426f4a49af8aa072b075549ab99546
I also changed up the init_moto.cpp like the init_surnia.cpp we have for surnia with only the boost info for now: https://github.com/aaronmarch/andro...mmit/ca313bab8097a971e88ecdcfd8495a0545d9d80e
No go. I've tried changing up the apns, completely different apns, the stock apns, mvno-slayer...
Any ideas? Do you think we can get it, or should we try to call in reinforcements?
https://test-it.us/apns-conf.xml
Here is the stock E4 apns-conf.xml file unfortunately these values must matched what is built into apps/common/res/apns.xml, so you'd have to include the apn file i linked to /etc/apns-conf.xml and make that match what you build lineage with or use sql editor.
I'm working on it as we speak tho. I did randomly have a 1x data connection earlier lol. Well get it; it should be simple. WIll keep you posted.
And for whatever reason being able to edit and save apns if you edit the mcc mnc and have them not disappear seems to have reverted. It was working for a month or so not to long ago.
apn carrier="Sprint"
mcc="311"
mnc="870"
type="default,supl,mms,fota,cbs,ia,wifi"
protocol="IPV4V6"
roaming_protocol="IPV4V6"
mmsc="http://mm.myboostmobile.com"
mmsproxy="oap7.sprintpcs.com"
mmsport="80"/>
Is the new boost /sprint LTE apn.
I added the wifi under type even tho boost blocks wifi calling atm via the phones imei or whatever, but sprint allows wifi calling can also change name of apn carrier to sprint, but seems like lineage roms call it sprint regardless and that doesn't really matter.
CodyF86 said:
https://test-it.us/apns-conf.xml
Here is the stock E4 apns-conf.xml file unfortunately these values must matched what is built into apps/common/res/apns.xml, so you'd have to include the apn file i linked to /etc/apns-conf.xml and make that match what you build lineage with or use sql editor.
I'm working on it as we speak tho. I did randomly have a 1x data connection earlier lol. Well get it; it should be simple. WIll keep you posted.
And for whatever reason being able to edit and save apns if you edit the mcc mnc and have them not disappear seems to have reverted. It was working for a month or so not to long ago.
Click to expand...
Click to collapse
Yeah, it shouldn't be too hard because it's reading the sim card. It's almost there. I completely forgot about about making the apns match, I knew I was forgetting something, lol.
@mightysween and some others for the Moto G got cdma working back then....
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
amarc78 said:
Yeah, it shouldn't be too hard because it's reading the sim card. It's almost there. I completely forgot about about making the apns match, I knew I was forgetting something, lol.
Click to expand...
Click to collapse
Did you get that combination of 1x that I sent you? XDA doesn't let me see replied messages
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
SatoXian Theory:
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
I posted it here. But I'm glad you made a new section for it.
SykkNyzz said:
@mightysween and some others for the Moto G got cdma working back then....
Click to expand...
Click to collapse
Yeah, me and CodyF86 and mainly Gabrielle M, who I was thinking about when I mentioned calling in reinforcements. I'm pretty sure it's just a matter of getting the apns correct, so it's not as bad as falcon was back then.
SykkNyzz said:
@mightysween and some others for the Moto G got cdma working back then....
---------- Post added at 02:23 PM ---------- Previous post was at 02:22 PM ----------
Did you get that combination of 1x that I sent you? XDA doesn't let me see replied messages
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
SatoXian Theory:
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
https://forum.xda-developers.com/moto-e4/how-to/progress-boost-mobile-moto-e4-t3650359/post74158770
I posted it here. But I'm glad you made a new section for it.
Click to expand...
Click to collapse
Yes. I haven't able to get even the 1x but CodyF86 said he did.
Check out "SysLog"
https://play.google.com/store/apps/details?id=com.tortel.syslog
This is a quick way to pull a log for people without quick access to a PC. Just tick modem bc it covers ril/sim connections
This isn't 100% perfect but it is a good place holder for sending info and it has a scrubber to clear off personal data. But it takes longer.
SykkNyzz said:
Check out "SysLog"
https://play.google.com/store/apps/details?id=com.tortel.syslog
This is a quick way to pull a log for people without quick access to a PC. Just tick modem bc it covers ril/sim connections
This isn't 100% perfect but it is a good place holder for sending info and it has a scrubber to clear off personal data. But it takes longer.
Click to expand...
Click to collapse
That's what I usually recommend and use when I want to get some logs away from my pc.
Sent from my Moto E (4) using XDA Labs
It's odd because I've gotten 3G to work without even touching a thing. 1 day I got no data and the next I'm suddenly connected. After flashing the test zip in the Aquarios thread, it stopped working. I reflashed the ROM in hopes it'll return but no luck so far
On the lineage ROM I get 3G when I reset network settings and enable and disable airplane mode for some reason. Not sure if any of you guys have experienced the same thing with that ROM. I will be tinkering with various things to see if anything comes from it.
savagevegeta said:
It's odd because I've gotten 3G to work without even touching a thing. 1 day I got no data and the next I'm suddenly connected. After flashing the test zip in the Aquarios thread, it stopped working. I reflashed the ROM in hopes it'll return but no luck so far
Click to expand...
Click to collapse
For future reference, please don't talk about a rom other then the one the thread is for. In reference to your AquariOS comment in the Lineage thread. It's kinda rude and against the rules.
Sent from my Moto E (4) using XDA Labs
ThatBunner said:
On the lineage ROM I get 3G when I reset network settings and enable and disable airplane mode for some reason. Not sure if any of you guys have experienced the same thing with that ROM. I will be tinkering with various things to see if anything comes from it.
Click to expand...
Click to collapse
I am on the stock rom of the unlocked Amazon version. Phone is on the Sprint Free Service for a year plan so I figured I would tinker around with *#*#DATA#*#* because I was trying to figure out if CA was enabled because it's the Qcom Snapdragon version. I tried changing the LTE Band Priority. Band 41 is strong in my area and I have a Magic Box which amplifies it to be useable indoors. When I changed the Band Priority the LTE signal COMPLETELY dropped. If I switch settings to 3G or 1x I'll get signal bars. When I first turn on the phone it will connect to LTE for less than a second and then completely drop.
I'm guessing when I changed the band setting (I may have made 1 small change on the APN screen but can't remember) that it made an edit to the APN, which seems impossible to get to the regular APN screen like you easily can with GSM carriers.
I'm a newbie but I've searched everywhere trying to find a fix without rooting (since I just got the phone a month ago it would be easier to get a warranty replacement at this point). Ultimately what I'm saying is that it seems whatever the issue you are having with the custom mod must be similar to what I accidentally did to my phone. Maybe that will help narrow down what exactly is triggering your phone to not have data. :cyclops:
If this is a "duh, we knew that already" I apologize in advance! I browse tons of threads on here but have never posted so I was thinking maybe my mistake could help figure out someone else's issue
amarc78 said:
For future reference, please don't talk about a rom other then the one the thread is for. In reference to your AquariOS comment in the Lineage thread. It's kinda rude and against the rules.
Click to expand...
Click to collapse
Ouch. Okay :/
Here is what I could muster for compare/contrast with a logcat @amarc78. hope it helps?
I wasn't home to add this note. But it was done with the same combo for the original alpha you sent me
SS:
One build I was using had mobile data problems and resetting the APN to default helped connect without manually putting in an APN maybe that might work for some.
SykkNyzz said:
SS:
Click to expand...
Click to collapse
Maybe the baseband being different can be the problem
[email protected] said:
Maybe the baseband being different can be the problem
Click to expand...
Click to collapse
I'm sure it is. This is all I could get out of a aosp-caf build.
Sent from my Moto E (4) using XDA Labs
amarc78 said:
I'm sure it is. This is all I could get out of a aosp-caf build.
Click to expand...
Click to collapse
Yeah, I was meandering btwn MVNO Slayer and MopedRyders R2 boost zip
---------- Post added at 05:30 PM ---------- Previous post was at 05:25 PM ----------
I also believe it may have something to do with ##SCRTN# in stock, then flashing over. Because going from Lineage with 1x to stock makes my phone go 3G only until I use ##SCRTN# then it fixes the data properly to LTE
(This has happened everytime with Amarc's Alpha Lineage OS)