AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or LAOS team, if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
Tested on Xperia XZ Premium G8142.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Features
Feature list (rough Overview)
Credits
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
maxwen
DU team
SlimRoms team
Resurrection Remix team
OmniRom team
Community
Team
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
Donations
AICP official: PayPal
AndroPlus: PayPal
Downloads
Latest Stable Release Version 12.1
Download here
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
Issues
Wi-Fi region code sometimes become US
Wi-Fi is not always on at startup
Auto brightness is too dark compared to stock
Sometimes fails to shutdown (press vol+ and power key to force shutdown)
Force reboot sometimes happens when you use fingerprint
You tell...
Instructions
The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it, and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Again: Don't do it if you don't know it!
Download the ROM and GApps and transfer them to your device
Boot to recovery (TWRP recommended)
Wipe system, Cache, data and ART/Dalvik cache
Flash ROM Zipfile
Flash/Install GApps (optional, needed for e.g. Google Play store to work)
Flash/Install the root solution of choice (optional)
Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported root solutions:
Magisk v12(remember that v12 needs the Manager to be installed separately from XDA thread)
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
Sources
IceColdJelly AICP G+ community
Gerrit Code Review
Github
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.4
Version Information
Status: Testing
Version: 7.1.2 (N)
!!!Please note OP is outdated!!!
I can't edit OP because of "Your submission could not be processed because a security token was missing." error, and I contacted and got no response from xda.
This is not stable release.
Working
Wi-Fi
Wi-Fi Hotspot
Bluetooth
Camera / flash light
NFC
Dual SIM
Mobile data and call
Fingerprint (not so good compared to stock)
MTP
micro SD card
USB Power Delivery
Encryption
Glove mode
Not working
VoLTE
Bugs
Wi-Fi region code sometimes become US
Wi-Fi is not always on at startup
Auto brightness is too dark compared to stock
Sometimes fails to shutdown (press vol+ and power key to force shutdown)
Force reboot sometimes happens
Sounds in apps
Battery temp
Thank you xda, I lost many times for editing and I can't edit OP because of "Your submission could not be processed because a security token was missing."
xda's editing system is too unstable for me.
Excited (and nervous!) to try this....deciding if it's worth it to do or not and lose the drm keys....
Really great！Can this ROM use the camera properly?
预谋时间 said:
Really great！Can this ROM use the camera properly?
Click to expand...
Click to collapse
Yes, camera can save photo even you use flash light, though there is limitation of resolution and ISO (fxxk DRM)
AndroPlus said:
Yes, camera can save photo even you use flash light, though there is limitation of resolution and ISO (fxxk DRM)
Click to expand...
Click to collapse
What is the resolution now? Thank you very much for your efforts，I would like to see hope soon:good:
预谋时间 said:
What is the resolution now? Thank you very much for your efforts，I would like to see hope soon:good:
Click to expand...
Click to collapse
Plase see attached pic.
Max is limited at 17.1MP.
hello androplus which zip is for the G8142 and which is for the G8141
AndroPlus said:
Plase see attached pic.
Max is limited at 17.1MP.
Click to expand...
Click to collapse
whitch app younuse1 it is not sony camera app
can you share it pls
MASTERXS said:
hello androplus which zip is for the G8142 and which is for the G8141
Click to expand...
Click to collapse
Currently I'm building only for G8142, but it may work on G8141 since my custom kernel is working on both G8141 and G8142 without problem.
Please try and report
karrouma said:
whitch app younuse1 it is not sony camera app
can you share it pls
Click to expand...
Click to collapse
It's Snapdragon Camera.
I don't recommend but you can download rom and deodex it
No network is found at g8141.
AndroPlus said:
Currently I'm building only for G8142, but it may work on G8141 since my custom kernel is working on both G8141 and G8142 without problem.
Please try and report
It's Snapdragon Camera.
I don't recommend but you can download rom and deodex it
Click to expand...
Click to collapse
I will.
But waiting for DRM FIX is possible in the future.
Thank you
it works perfectly i rom thanks hey how come it boot loops with kernel DK13-R7?
besides that everything is all good which kernel should i use
---------- Post added at 04:42 PM ---------- Previous post was at 04:37 PM ----------
supermaus100 said:
No network is found at g8141.
Click to expand...
Click to collapse
you hafta wait for it
---------- Post added at 05:12 PM ---------- Previous post was at 04:42 PM ----------
karrouma said:
I will.
But waiting for DRM FIX is possible in the future.
Thank you
Click to expand...
Click to collapse
drm fix is out already
MASTERXS said:
drm fix is out already
Click to expand...
Click to collapse
Where is fixed for xz premium cam
Any link pls
---------- Post added at 08:48 PM ---------- Previous post was at 08:36 PM ----------
MASTERXS said:
it works perfectly i rom thanks hey how come it boot loops with kernel DK13-R7?
besides that everything is all good which kernel should i use
drm fix is out already
Click to expand...
Click to collapse
Bro
Dk13-R7 is for xz duality rom not for xz premium
ok no wonder why
---------- Post added at 06:32 PM ---------- Previous post was at 06:24 PM ----------
sorry my mistake still work in progress drm fix didnt read properly
Waiting for DRM patches for this ROM. Because I made video and photos a lot...
I did a few patches (tested drm hacks) last night, which crashed my system the (felt) 1000 time. So I decided to test AICP, like I did on the first version. I will give feedback soon.
Feedback #1:
- Settings -> Storage -> Internal storage shows -9,77 GB used and only 29,81 GB total (but external SD looks okay)
- Display brightness maximum is way darker than on stock rom. Display is not readable outside.
- Device is set to German, but in notification area the "USB connected" message is in Chinese
- Fingerprint sometimes doesn't work and if it works, then slowly.
- Whatsapp audio messages won't play (logcat throws a ton of errors and warnings)
- Camera focus on 3rd party apps is crazy (losing focus, get it back, losing it again, ...)
- Camera quality on saved images is not really good (blurred - looks like it's upscaled)
- Random Cell Broadcasts every few minutes - can not be disabled in settings
-
update im getting same problems on G8141
sToRm// said:
I did a few patches (tested drm hacks) last night, which crashed my system the (felt) 1000 time. So I decided to test AICP, like I did on the first version. I will give feedback soon.
Feedback #1:
- Settings -> Storage -> Internal storage shows -9,77 GB used and only 29,81 GB total (but external SD looks okay)
- Display brightness maximum is way darker than on stock rom. Display is not readable outside.
- Device is set to German, but in notification area the "USB connected" message is in Chinese
- Fingerprint sometimes doesn't work and if it works, then slowly.
- Whatsapp audio messages won't play (logcat throws a ton of errors and warnings)
- Camera focus on 3rd party apps is crazy (losing focus, get it back, losing it again, ...)
- Camera quality on saved images is not really good (blurred - looks like it's upscaled)
- Random Cell Broadcasts every few minutes - can not be disabled in settings
-
Click to expand...
Click to collapse
besides that everything works good
---------- Post added at 05:52 AM ---------- Previous post was at 05:48 AM ----------
im australia the stock rom which i changed back to has really crap network i only get 2 bars but on the aicp im always getting full network bar or just one off
---------- Post added at 05:52 AM ---------- Previous post was at 05:52 AM ----------
why is that?
---------- Post added at 05:55 AM ---------- Previous post was at 05:52 AM ----------
AndroPlus said:
Currently I'm building only for G8142, but it may work on G8141 since my custom kernel is working on both G8141 and G8142 without problem.
Please try and report
It's Snapdragon Camera.
I don't recommend but you can download rom and deodex it
Click to expand...
Click to collapse
which kernel is the overclock one coz im using lastest ver 5 but no overclock
oh， it Keep in patching ， More than 10 minutes
hey guys,
am i the only one who doesent have sound over the aux port?
(Im using G8141 btw)
(edit 2nd: some logs added)
Related
CyanogenMod is a free, community built distribution of Android 4.4 which greatly extends the capabilities of your phone.
Code:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Contributors
jerpelea, Kali-, Bin4ry,cdesai, adfa666, tilal6991
Version Information
Status: Stable Builds
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led) {SKIP NEXT 3 STEPS IF YOU ALREADY HAVE A RECOVERY}
- fastboot flash boot boot.img (from cm11 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe data and cache
- reboot
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY ME FROM FreeXperia Team SOURCES (Permission Taken )
Kernel Source By FXP
https://github.com/CyanogenMod/android_kernel_sony_tianchi
My kernel Source
https://github.com/ashwin996/android_device_sony_tianchi
Download Gapps From here (select anyone doesnt matter)
http://forum.xda-developers.com/showthread.php?t=2397942 (Thanks to TKruzze)
Code:
[SIZE="3"][B]PLEASE DONT MIRROR MY ROMS(I LIKE TO KEEP DOWNLOAD COUNT)[/B][/SIZE]
[URL="http://d-h.st/vUk"]http://d-h.st/vUk[/URL]
USE ART FOR BEST PERFORM
Fix for network errors
Paste this line in build.prop
persist.multisim.config dsds
Reboot and then use sim 1 to register to network
On Every reboot you have to go to sim settings and enable Sim1
Camera Fix
[url]http://forum.xda-developers.com/t2-ultra/orig-development/cam-fix-t3027583[/url]
Changelog and Bug List
What's working:
*Display
*Audio playback
*Audio recording
*Video playback
*Screenshot
*External SDcard
*Internal SDcard
*WiFi
*Bluetooth
*Notification LED
*MTP
*Torch
*Brightness control
*GPS
*NFC
*RIL(Only SIM 1 Works)
Not working:
*Camera (Video Recording works)
FAQ's for Beginners
1)I want to use Xposed On ART
A)You cant,You will have to stay on dalvik.
2)How do i restore my data from stock rom
A)Backup data with titanium backup and then again restore data after flashing cm11
3)Can i install this on locked bootloader
A)No you cant,Google how to unlock bootloader
4)Can i flash this from Jellybean firmware
A)I recommend flashing a Kitkat FTF before flashing this Rom
5)Do i need to wipe and backup data everytime i flash an update
A)No just the first time and as long as you stay on CM 11 u dont need to do that again
6)Will this work on single Sim Phone
A)No,Please flash FXP builds
wolaaaaaa
HERE WE GO
THANKS A LOOOOOOOOOOOOOT
Thanks man
there had been much anticipation on this
---------- Post added at 09:36 AM ---------- Previous post was at 09:33 AM ----------
OTA updates supported????
krishna442 said:
Thanks man
there had been much anticipation on this
---------- Post added at 09:36 AM ---------- Previous post was at 09:33 AM ----------
OTA updates supported????
Click to expand...
Click to collapse
no you will have to download them manually
Ashwin Prabhunerurkar said:
HOWTO
ENJOY AN UNOFFICIAL CM RELEASE BROUGHT TO YOU BY ME FROM FreeXperia Team SOURCES (Permission Taken
Click to expand...
Click to collapse
Thanks again Ashwin , I was very disappointed to see the previous thread's proceedings. Besides I made a feature request in the previous thread. Did you have time to check it out ? is the move to sd card feature natively supported in CM? and does it actually send the app to externa sd card (i.e. sdcard1) ?
Thread closed
I'm unlocking this thread. Some communication issues have taken place between the OP and the FXP. Hopefully everything is sorted now and this thread will serve its purpose.
Please keep it nice and clean.
Thank you.
The link redirects to the CM11 for the D5303. I do not know if it is compatible for the D5322, but I will not test.
I tested the CM11 Beta 4 and it worked well, just not working the camera.
Very fast and smooth compared to the stock sony.
Tested the ART and also functioned normally.
Andrey Piekas said:
The link redirects to the CM11 for the D5303. I do not know if it is compatible for the D5322, but I will not test.
I tested the CM11 Beta 4 and it worked well, just not working the camera.
Very fast and smooth compared to the stock sony.
Tested the ART and also functioned normally.
Click to expand...
Click to collapse
thats not for D5303
Its for our mobile i just forgot to update the fingerprint that time
Use that build as its faster and smoother
Any moderator/administrator deletes this post.
NFC fixed new build coming soon
Ashwin Prabhunerurkar said:
NFC fixed new build coming soon
Click to expand...
Click to collapse
great news
Great
All Left is that camera Bug
lostfurby said:
Great
All Left is that camera Bug
Click to expand...
Click to collapse
and no second sim
Ashwin Prabhunerurkar said:
and no second sim
Click to expand...
Click to collapse
thats pretty serious bug
could be related to bloobs in kernel ?
Yea, I am looking forward to the dualsim build too. That will be one amazing thing for my device.
Some planned update?
FXP346 already launched, but nothing to support the D5322
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Information:
This is up to date builds of CyanogenMod 12.1 based on original work by jrior001.
Known issues:
FM Radio is unsupported.
SELinux is in permissive mode for now.
Links:
Download CyanogenMod 12.1
Download GAPPS
Device Tree
Kernel Sources
CyanogenMod Patches 1, Patches 2
Credits:
CyanogenMod
jrior001
crpalmer
And other ZF2 contributors
XDA:DevDB Information
Unofficial CyanogenMod 12.1 Updated (Z00D), ROM for the Asus ZenFone 2
Contributors
flex1911
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 12.16.5.126
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-11-12
Last Updated 2016-11-12
Reserved
Changelog:
Code:
20161112:
Updated base to .126 stock rom
Updated to last CM sources and 2016-10-01 security patch
Major SELinux update (policy is pretty raw and unstable for now, so permissive is used)
Fixed USB-OTG support (working USB disk)
Some minor updates and fixes
Please update to latest stock firmware before installing this!
Iam so glad you supported our device
Thank you very much
Hope you will compile more rom for z00d
12.1??
kjinx01 said:
12.1??
Click to expand...
Click to collapse
Because of problems with hwcomposer I did not manage to run graphics on cm13 for now. I'm looking for a solution, but I can not promise that issue somehow can be solved without sources to critical libraries.
Can you move to cm 13 soon?
---------- Post added at 01:41 AM ---------- Previous post was at 01:41 AM ----------
Hope you move to cm 13 soon
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
I also really look forward to cm 12.1 official soon, sir
ShakiraHill said:
Can you move to cm 13 soon?
---------- Post added at 01:41 AM ---------- Previous post was at 01:41 AM ----------
Hope you move to cm 13 soon
---------- Post added at 01:48 AM ---------- Previous post was at 01:41 AM ----------
I also really look forward to cm 12.1 official soon, sir
Click to expand...
Click to collapse
Official CM is always good. But with 12.1 it's almost pointless now.
Good Work.Your rom is wonderful
Your updated cm 12.1 is very good and stable
Hope you will consider to move to compile cm 13 or official cm 12.1 for z00d as soon as possible
We will all really apreciate
Moreover,when i use music player,it crashed and stated that can't play this song
And whenever i reboot ,it has a popup of force close
Hope you take a quick look and fix this bug
Thanks for this rom. There is a slight problem i found. One of it is, when i charge the phone and it reached 80%, the notification led turns to yellow. Shouldn't the led still be red? And another one is, when the phone is on offline charging mode, the usual battery indicator doesn't appear, instead a big green empty battery with a question mark in it appears. Please verify if this problem happened to any of you. Thank you and sorry for english.
ivalno said:
Thanks for this rom. There is a slight problem i found. One of it is, when i charge the phone and it reached 80%, the notification led turns to yellow. Shouldn't the led still be red? And another one is, when the phone is on offline charging mode, the usual battery indicator doesn't appear, instead a big green empty battery with a question mark in it appears. Please verify if this problem happened to any of you. Thank you and sorry for english.
Click to expand...
Click to collapse
No, after reaching 80% it should be yellow. Although I'll test offline charging. Thanks for report!
flex1911 said:
No, after reaching 80% it should be yellow. Although I'll test offline charging. Thanks for report!
Click to expand...
Click to collapse
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
ivalno said:
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
Click to expand...
Click to collapse
Yeah, everything is right. Make sure you're running latest firmware (.126)
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Thanks for the update, op.
There are more roms coming up for this device, just fixing some things .
Op, CM13 doesn't work, I tried it myself. However, there's something else we can still do about it. Get in touch with me, and let's work together on this.
ivalno said:
I don't know if I'm doing the right thing but I just wipe cache and data, and flash the rom and gapps, and reboot.
It is necessary to wipe cache and data again after flashing them? Sorry for english.
Click to expand...
Click to collapse
RusLion__ said:
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Click to expand...
Click to collapse
Yes, it is necessary. You can update from previous cm12.1 only if you already have last firmware, otherwise it will not work consistently.
This ROM was built using .126 blobs, drivers and kernel, so you are required to update the firmware to .126.
RusLion__ said:
So there is still hope for cm13? I'll keep fingers crossed Thanks for an update btw
---------- Post added at 07:46 PM ---------- Previous post was at 07:23 PM ----------
Please update to latest stock firmware before installing this! - is that neccecary? Can i update from preivous cm12 build?
Click to expand...
Click to collapse
I aslo hope so
I hope some devoted devs will find a solution to this problem to compile cm 13 for z00d
We are really looking forward to cm 13 in the future,sir :'
Or at least is cm 12.1 official
#alwaysrespect
---------- Post added at 04:13 PM ---------- Previous post was at 04:08 PM ----------
jacoghi said:
Thanks for the update, op.
There are more roms coming up for this device, just fixing some things .
Op, CM13 doesn't work, I tried it myself. However, there's something else we can still do about it. Get in touch with me, and let's work together on this.
Click to expand...
Click to collapse
We are really glad to hear that there will be more roms coming up for our device
I can't wait to see them
Thank you very much for your supporting
We highly appreciate it
Moreover, we are also really looking forward to your solutions to compile cm 13 for z00d
Or at least, cm 12.1 official is also good now ;'
All best wishes for you
Hope you are healthy and lucky
Hi, thanks for your work
How is battery life compared to stock?
Greg9 said:
Hi, thanks for your work
How is battery life compared to stock?
Click to expand...
Click to collapse
I did not compare that. You can test it by yourself. If it's worse - i'll do something with cpu scaling in next build.
Op, this is it. Couldn't get ril to work yet, as I mentioned. However, it's ridiculously fast in comparison to 5.1 so I guess it's worth the shot.
Is that 6.0 for zood? Is that a dream?! Man, I hope you'll manage to get ril working
SUPPORT FOR THIS HAS BEEN DISCONTINUED
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.x (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Unlock Bootloader!
Download the zip(s).
Install Appropriate FW base (STOCK MM 4.21.40.xx base is required) simple FW update package is available at my download link
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash LineageOS.
Optional: Install the Google Apps addon package. Open Gapps x86 7.1
Optional: Install the addon SU zip (x86 version)
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
[*] Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
[*] Screen recording not working Works now.
Chromecast screen mirroring not working, native casting works though.
[*] factory reset from setting menu has been reported to cause recovery boot loops. Works now.
CM14 (not device specific issues)
No CMTE yet
CM file manager has trouble accessing external sdcard
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
DOWNLOADS.LINEAGEOS.ORG
Recovery Links
Z00A
MM BL compatible TWRP: TWRP
Z008
MM BL compatible TWRP: TWRP
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps.
SU addon:
Flashable SU addon/removal
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
LineageOS 14.1 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer, say99
Source Code: https://github.com/LineageOS/android_kernel_asus_moorefield
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 4.21.40.xxx stock base
Version Information
Status: Nightly
Beta Release Date: 2016-11-09
Created 2017-01-27
Last Updated 2018-01-28
Reserved
DATA MIGRATION BUILDS
"THESE BUILDS WILL TAKE A LONG TIME (~30 mins) TO BOOT"
LineageOS has moved to private key signed builds. This is something that typically requires a full data wipe to transition too. To ease this burden for users who are not accustomed to that , the initial release builds are designed "MIGRATION" to help users who do not want to clean flash from an existing CM/Lineage build. Use the data migration builds as a one time "Flash this first, and then the officials" to migrate to private key signed builds. Follow the below instructions using the admiration builds to preserve app data if so desired, Otherwise feel free to clean flash directly to the weekly release builds
Official CM-13.0 -> CM14.1 Upgrade Guide
As seen with my previous unofficial CM-13.0 builds based on the MM Stock roms, An upgrade to the MM Firmware and bootloader is required going forward.
This guide is here to assist.
1) Download ROM and 7.1 GAPPS
2) Download my Firmware Update package for Z00A or Z008 . FASTBOOT AND ADB ARE REQUIRED!
3) Follow the included instructions to update Firmware and flash the new compatible TWRP. If for some reason the new TWRP is not flashed automatically flash it manually via fastboot. "fastboot flash recovery recoverimagename.img
4) Reboot to recovery and flash CM 14 and Gapps, reboot and enjoy. Data Wipe on upgrade is not required
CM 14.1 from Stock MM
1) Unlock Bootloader
2) Flash compatible TWRP
3) Perform desired backups
4) From recovery, factory reset & install ROM & 7.1 GAPPS
5) Enjoy!
CM 14.1 from CM13 Mm based beta builds
1) Reboot to TWRP( should already have good version)
2) Flash CM14.1 and 7.1 GAPPS
3) Reboot and enjoy!!
Reserve !
---------- Post added at 09:28 AM ---------- Previous post was at 09:14 AM ----------
I've just want to verify
to flash lineageOs
Its required Mm bootloader.
Is it required to flash also the firmware of Mm or just the bootloader and twrp !
Flashed migration build just fine. Didn't take too long. Flashing nightly now!
Thanks for big work. We love this rom, LinOS ???
Finally here!!!! Great job guys I'm glad you didn't give up through everything <3
jrior001 said:
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Polaris Office, Chase Mobile, Showbox...
DRM content is currently broken
Live Display (color calibration) not working yet
Screen recording not working
Chromecast screen mirroring not working, native casting works though.
factory reset from setting menu has been reported to cause recovery boot loops.
Battery life is horrible, numerous display wakelock issues
CM14 (not device specific issues)
No CMTE yet
Status bar icon changing broken
CM file manager has trouble accessing external sdcard
Battery profile is non functional/string errors
Click to expand...
Click to collapse
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
beibyboy06 said:
Reserve !
---------- Post added at 09:28 AM ---------- Previous post was at 09:14 AM ----------
I've just want to verify
to flash lineageOs
Its required Mm bootloader.
Is it required to flash also the firmware of Mm or just the bootloader and twrp !
Click to expand...
Click to collapse
no... just upgrade your bootloader to MM, download and flash
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
PedroCaseiro said:
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
Click to expand...
Click to collapse
give them time bro.... First nightly is up just now... chill
Why the zip on the lineageOS download page are not signed ? I need to disable the verification to install it in TWRP...
PedroCaseiro said:
Damn that's a lot of issues! Is this from the Lineage OS official build or from the unofficial ? Some of them issues must have had been fixed, right ?
Click to expand...
Click to collapse
Provably a few of those I can clean up, was just quick copy/pasta from the other thread
Sent from my ASUS_Z008 using Tapatalk
persieghini said:
no... just upgrade your bootloader to MM, download and flash
---------- Post added at 03:15 AM ---------- Previous post was at 03:12 AM ----------
give them time bro.... First nightly is up just now... chill
Click to expand...
Click to collapse
Ok btw can I upgrade my lollipop bootloader to MM via twrp
And also should I unroot and uninstall xposed?
cedric1997 said:
Why the zip on the lineageOS download page are not signed ? I need to disable the verification to install it in TWRP...
Click to expand...
Click to collapse
The builds are signed, its your twrp that's not signed with the same private key(and never will be) that keeps you from using that sig verification.
Sent from my ASUS_Z008 using Tapatalk
jrior001 said:
Provably a few of those I can clean up, was just quick copy/pasta from the other thread
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
Is the battery life really horrible? Is it worse than the MM blobs CM 13? Anyways, thanks for continuing to develop this great ROM.
How can I enable also G-Assistant and G-Now on LinOS
crisvincent said:
Is the battery life really horrible? Is it worse than the MM blobs CM 13? Anyways, thanks for continuing to develop this great ROM.
Click to expand...
Click to collapse
No, it's actually been much better recently. I cleaned up a couple of the issues that were causing inconsistent wakelock issues a week or so ago.
Sent from my ASUS_Z008 using Tapatalk
jrior001 said:
No, it's actually been much better recently. I cleaned up a couple of the issues that were causing inconsistent wakelock issues a week or so ago.
Sent from my ASUS_Z008 using Tapatalk
Click to expand...
Click to collapse
Can confirm, I noticed my battery get much better recently before realizing you had updated that. I still have an issue with losing fast/quick charge, but I haven't seen others mention this so it's likely an issue on my end.
New nightly rom is amazing.... Thanks a lot guys @jrior001
---------- Post added at 04:11 AM ---------- Previous post was at 04:07 AM ----------
beibyboy06 said:
Ok btw can I upgrade my lollipop bootloader to MM via twrp
And also should I unroot and uninstall xposed?
Click to expand...
Click to collapse
No you can't do it with twrp... You need adb(comp) and unrooting is not necessary... Uninstalling xposed is also not necessary... It won't work in nougat.. It'll just be there
Can i use SuperSU instead of the official root?
Wow , I know I've just done a clean install of the nightly ....but , is it just me or is this a lot faster , more fluent browsing the web pages than anything built in the past ? Or am I slightly delirious thru watching all that blue building up coff ?
Hats off to the new age lineage and the master dev
Just moved to the official branch. Migration tool worked perfectly, and SU optional package did its job as well.
The whole process was absolutely painless, so let's enjoy OTA updates from now on!
LineageOS For LeEco X500/7/9
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
*
What works
-Fingerprint
-Audio
-Data Connection
-Bluetooth
-Dual SIM
-Camera
-Gapps
-HotSpot
-Mic
-RIL
-Screen Recording
-SMS
-Storage
-USSD
-WiFi
-GPS
Known issues
-None a.t.m
How to install
-Reboot recovery
(TWRP 3.0.3+)
-Wipe dalvik cache,system,data,cache
-Install LOS 13 zip
-Reboot
Minimum Requirement
EUI 5.8.017S+
Note
-Root is disabled by default
-To get root access flash latest SuperSU after flashing ROM then reboot
Downloads
- LOS 13
- LOS13 LED FIX
- Fingerprint FIX
- SuperSU
- GApps
Credits
- @GMCadiom (Original ROM)
- @DroidThug (Kernel)
- WisniaPL
LineageOS Unofficial 14.1
By
WisniaPL
>>>HERE<<<
Can we receive updates through OTA ?
Happy to see one more ROM of our device
Hope we can have official builds
---------- Post added at 06:00 PM ---------- Previous post was at 05:58 PM ----------
marc2800 said:
Can we receive updates through OTA ?
Click to expand...
Click to collapse
No OTA for unofficial builds
You can always dirty flash the later builds over the existing LOS 13( unless dev specifies clean flash)
Tip : better to have a backup while u update
i will update the rom soon
and will built more new roms too soon
am just busy on my life and work
sorry for too late
cya
GMCadiom said:
i will update the rom soon
and will built more new rooms too soon
am just busy on my life and work
sorry for too late
cya
Click to expand...
Click to collapse
good to hear
After flashing the apps will be optimized, but at "Starting System" it stopped, no more reaction
What´s happend?
Urs_1956 said:
After flashing the apps will be optimized, but at "Starting System" it stopped, no more reaction
What´s happend?
Click to expand...
Click to collapse
Try a clean install by wiping dalvik cache, system,data and cache >> Install LOS 13.zip >> LOS 13 LED FIX >> Install GApps (optional) >> Install SuperSU (optional) >> reboot
Amazing Work.. hat's off !! Please make more roms with stable builds.. big request!!
Urs_1956 said:
After flashing the apps will be optimized, but at "Starting System" it stopped, no more reaction
What´s happend?
Click to expand...
Click to collapse
It looks like you've installed the ROM on a lollipop version of EUI.
If my guess is right, then install MM version of EUI first and then clean install Lineage OS 13 using the installation steps.
And you're done! Have fun.
Can you share the proprietary for porting? I want to port to x600, but there are problems with hw-codecs.
Does Xposed work ?
bugs.
Hi. I'm not sure how many of you have encountered these 2 bugs, but I did:
1. Multimedia over Bluetooth doesn't work... For all online music/videos or downloaded...
2. When screen saying, the secondary video doesn't switch to landscape mode. Instead rotates in its place and shows vertical.
Hope this is useful... I did a clean install...
Apart from these the ROM is super stable. Video freeze and browser freeze eliminated... Or rather terminates!
rudie_techie said:
Hi. I'm not sure how many of you have encountered these 2 bugs, but I did:
1. Multimedia over Bluetooth doesn't work... For all online music/videos or downloaded
Click to expand...
Click to collapse
try this and report back
purna199 said:
Does Xposed work ?
Click to expand...
Click to collapse
Yes
ROM is best! But still it posses the issue of freezing in YouTube videos and also 1080p videos.
Hope it'll be fixed soon. Thanks!
I also felt its freezing some times. Fingerprint not working,even not able to add first fingerprint.. Do any one know how to make it work?
surajak said:
I also felt its freezing some times. Fingerprint not working,even not able to add first fingerprint.. Do any one know how to make it work?
Click to expand...
Click to collapse
Follow this >>> FP Restore Method
Hi
Can you please provide le stock camera app ?,
Misssing beauty mode in cyanogen camera
Rom not flasing on indian le 1s x507
TWRP:3.1.0
Error: signal 11
some mount error .... afaik error with mount partion name... any help appreciated
Does Fast Charging Work ?
Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boot
WiFi
Hotspot
Audio
RIL
Bluetooth
Sensors
FM
Camera
SDCard
GPS
Known issues:
VoLTE
Video recording
SELinux Enforcing
Instructions :
Download the build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Un-Official build: https://androidfilehost.com/?fid=673956719939815946
Google Apps: http://opengapps.org/
Credits : @ashwin007 (for his base trees)
LineageOS Team
XDA:DevDB Information
LineageOS 14.1 for taido, ROM for the Moto E3
Contributors
vinothvkr
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Testing
Created 2017-10-01
Last Updated 2018-02-06
Reserved
Release - 28/01/2018
Synced with latest LineageOS source.
Reserved
Is this rom work on Moto E3 Power (XT1706)?
Darsh Monani said:
Is this rom work on Moto E3 Power (XT1706)?
Click to expand...
Click to collapse
This is a moto e3 thread and its posted in that thread so logic dictates it will work on either model of e3......
Its working on my e3 XT1700 (not power) but e3 power ROMs (XT1706) work on my e3.
Plz plz plz fix camera issues...
It's almost as if am begging for it
I wander and despair at some of these comments in ROM threads.
If its not volte, its the camera
Its not up to the ROM developments team to fix the camera.
Moto e3 never had an official 7.0 update so the camera is using a hack and that hack won't be fixed unless Motorola/lenovo release an updated source code, or mediatek release updated drivers for the processor..
Either way, posting here and begging won't get the camera or volte fixed, its going to take a long time to get the E3 camera up to AOSP standard, and to be fair, that's posted in most of the E3 rom threads, which people obviously don't read before coming here begging.....
bubba1601 said:
I wander and despair at some of these comments in ROM threads.
If its not volte, its the camera
Its not up to the ROM developments team to fix the camera.
Moto e3 never had an official 7.0 update so the camera is using a hack and that hack won't be fixed unless Motorola/lenovo release an updated source code, or mediatek release updated drivers for the processor..
Either way, posting here and begging won't get the camera or volte fixed, its going to take a long time to get the E3 camera up to AOSP standard, and to be fair, that's posted in most of the E3 rom threads, which people obviously don't read before coming here begging.....
Click to expand...
Click to collapse
A rom on YouTube claims to have the camera fixed but hotspot not working.
Channel name: Kartik Wadwa
manishah.1996 said:
A rom on YouTube claims to have the camera fixed but hotspot not working.
Channel name: Kartik Wadwa
Click to expand...
Click to collapse
It's the same Dev (samarV121) who's ROMs got removed from the E3 thread here on XDA if you didn't already know?
I've tried all of those 7.1.2 ROMs on my E3 (not power) and the camera isn't working on any of them, despite the claims otherwise.....
When you download one of those ROMs, the download link takes you to samarV121 android file host folder.
That's not a coincidence !
When I reported the fact the camera doesn't in fact work, I had a reply it was my fault for installing the ROM incorrectly on an "incompatible" device.
Strangely I never got a reply when I took the battery out of my E3 and sent a photo back of the label inside where it quite clearly states Motorola E3 XT1700......
bubba1601 said:
I wander and despair at some of these comments in ROM threads.
If its not volte, its the camera
Its not up to the ROM developments team to fix the camera.
Moto e3 never had an official 7.0 update so the camera is using a hack and that hack won't be fixed unless Motorola/lenovo release an updated source code, or mediatek release updated drivers for the processor..
Either way, posting here and begging won't get the camera or volte fixed, its going to take a long time to get the E3 camera up to AOSP standard, and to be fair, that's posted in most of the E3 rom threads, which people obviously don't read before coming here begging.....
Click to expand...
Click to collapse
All devices on LineageOS have their camera working on hacks - mostly by using BLOBs anyway. If the Camera is working, then the same part of the program which allows the device to access the Camera's BLOB should let the Camcorder of the device to communicate with it at that required DPI and resolution. From what I've figured out in some ROMs like those of SamarV which were blocked, his camcorder gets initialized, it's able to set the audio as well as the video source as it detects the camera when we switch to 'Video' mode and we are also able to select the format of the video that we are going to record, but is not able to prepare the camera for recording and crashes (falls on a error loop of some kind). While in ROMs like ashwinr's here, the application is not able to set the source of the video (detect device camera itself) and crashes. This is just a layman's view of the problem and it's probably already known by developers lol.
I'm not a coder, but it's just me trying to figure out the problem in my way and I do know for now the devs are literally working blind lol. *pun intended* So it's not entirely on the hands of the company of the device or the processor. But agreed, MediaTek is pretty useless when it comes to giving latest support to some recent past processors of theirs.
Does this ROM supports substratum?
Stuck on error 7
androidlover420 said:
Stuck on error 7
Click to expand...
Click to collapse
Try TWRP by ashwin
---------- Post added at 08:33 AM ---------- Previous post was at 08:32 AM ----------
Camera isn't working
apurav.812 said:
Try TWRP by ashwin
---------- Post added at 08:33 AM ---------- Previous post was at 08:32 AM ----------
Camera isn't working
Click to expand...
Click to collapse
Did you read the OP? (original post)
Its listed the camera doesn't work........
Just go back a page and read the comments..
bubba1601 said:
Did you read the OP? (original post)
Its listed the camera doesn't work........
Just go back a page and read the comments..
Click to expand...
Click to collapse
Yes I read the op
apurav.812 said:
Yes I read the op
Click to expand...
Click to collapse
Did you read the last page?
I'm not trying to be mean to you but on the last page there is a discussion about the camera, and its said its going to take a LONG time to fix.
Its better to read that sort of thing rather than keep posting about it, because I don't think this ROM is being developed anymore and the dev has moved to YOU TUBE......
I'm just trying to help you, the camera isn't going to be a quick fix.
Sorry.
Cannot connect to camera. where op says Camera working.
Please patch
Twrp error !
it is showing that "Updater Process Ended With Error 7" please help me:crying:
---------- Post added at 05:09 PM ---------- Previous post was at 05:00 PM ----------
twrp says that updater process ended with error 7. pls help me......:crying:
Narendranath said:
it is showing that "Updater Process Ended With Error 7" please help me:crying:
---------- Post added at 05:09 PM ---------- Previous post was at 05:00 PM ----------
twrp says that updater process ended with error 7. pls help me......:crying:
Click to expand...
Click to collapse
You have to flash the twrp given by him in this thread which is unique to this rom.
Each ROM build usually has their own unique recovery so unless he made the ROM build to work a generalised recovery, it will show the Error 7. Enjoy!
DystopianDJ said:
You have to flash the twrp given by him in this thread which is unique to this rom.
Each ROM build usually has their own unique recovery so unless he made the ROM build to work a generalised recovery, it will show the Error 7. Enjoy!
Click to expand...
Click to collapse
But there is no any specific recovery mentioned above