Related
I have tried the latest version of Visionary "R14" but it doesn't work, I have also tried Visionary "R3" "R11" "R12" and "13" and they all don't work on my OTA updated T-mobile G2.... either for temp-root or permanent root..I have tried the ADB/Rage/gfree method of rooting and I getting an ERROR on the last part instructions.... ""## mkdir failed for /system/xbin, File exists"
My main question is if anyone could check to see if their version of the Visionary app is the version 7 or r7...if so could you please used titanium backup to send me a copy of the file....
thank you so so much...
Not sure why a specific older version of Visionary would work if the newer (or older) versions would not.
Regarding your error message, is that when you run the command:
/data/local/tmp/root
Click to expand...
Click to collapse
If so you will note that the instructions on the wiki state immediately below that: You may see an error message along the lines of "mkdir: /system/xbin already exists", but if so you can ignore that, the rest of the script should still run ok.
If you boot into the bootloader (press volume down while powering on device) do you have S-OFF? If so you know that the GFREE part at least did work.
sammd301 said:
I have tried the latest version of Visionary "R14" but it doesn't work, I have also tried Visionary "R3" "R11" "R12" and "13" and they all don't work on my OTA updated T-mobile G2.... either for temp-root or permanent root..I have tried the ADB/Rage/gfree method of rooting and I getting an ERROR on the last part instructions.... ""## mkdir failed for /system/xbin, File exists"
My main question is if anyone could check to see if their version of the Visionary app is the version 7 or r7...if so could you please used titanium backup to send me a copy of the file....
thank you so so much...
Click to expand...
Click to collapse
As has been explained in the Development section, be VERY CAREFUL with Visionary as it is known to brick phones.
When I first got my DZ I was eager to Root and uses V14 to obtain root but remember that this is not a 'Real' S-OFF. GFREE is the best and safest method to use. I was a lucky newbie who didn't end up with a brick!
raitchison said:
Not sure why a specific older version of Visionary would work if the newer (or older) versions would not.
Regarding your error message, is that when you run the command:
If so you will note that the instructions on the wiki state immediately below that: You may see an error message along the lines of "mkdir: /system/xbin already exists", but if so you can ignore that, the rest of the script should still run ok.
If you boot into the bootloader (press volume down while powering on device) do you have S-OFF? If so you know that the GFREE part at least did work.
Click to expand...
Click to collapse
yes you are exactly right...when I input in this command " /data/local/tmp/root" then I got back this error "mkdir failed for /system/xbin, File exists" you see the difference, instead of "already exits" I did ignore the error message but when I tried to used a root required app like root explorer...It states the phone needs to rooted before the app can work....Lastly when I enter into the boot loader "I indeed notice that S-OFF" the problem is that the phone is not rooted not even temporary...as far as visionary r7 goes I recall after the OTA, it did work on my phone for temporary rooting...it is when I attempted to used visionary r14 to obtain permanent root that visionary r7 was overwritten by r14...which doesn't work even for temp rooting thanks for your input
gbarayah said:
As has been explained in the Development section, be VERY CAREFUL with Visionary as it is known to brick phones.
When I first got my DZ I was eager to Root and uses V14 to obtain root but remember that this is not a 'Real' S-OFF. GFREE is the best and safest method to use. I was a lucky newbie who didn't end up with a brick!
Click to expand...
Click to collapse
right now...neither method works not the "visionary r14 or ADB/RAGE/GFREE" I wouldn't mind using either method, the problem is that ADB/Rage/GFREE METHOD keep giving this error message "mkdir failed for /system/xbin, File exists" which I have done a ton of research and still can find a fixed,
sammd301 said:
yes you are exactly right...when I input in this command " /data/local/tmp/root" then I got back this error "mkdir failed for /system/xbin, File exists" you see the difference, instead of "already exits" I did ignore the error message but when I tried to used a root required app like root explorer...It states the phone needs to rooted before the app can work....Lastly when I enter into the boot loader "I indeed notice that S-OFF" the problem is that the phone is not rooted not even temporary...as far as visionary r7 goes I recall after the OTA, it did work on my phone for temporary rooting...it is when I attempted to used visionary r14 to obtain permanent root that visionary r7 was overwritten by r14...which doesn't work even for temp rooting thanks for your input
Click to expand...
Click to collapse
Crap I typed up this response but I guess I didn't submit it because it's gone...
OK what you are saying is actually good news, it means you had temp root at one point or gfree would not have worked (you would not have S-OFF now)
If you can get temp root to work even one more time you can flash ClockWorkMod recovery and then load a custom/pre-rooted ROM.
I do suspect that you have messed up your system with your various attempts at rooting (especially the fact that you used visionary and other deprecated root methods) and you need to wipe your system and start over with either a custom ROM or a pre-rooted stock ROM.
I would start by running this section of the root process:
ON YOUR PHONE:
1. Launch Terminal Emulator
2. Execute /data/local/tmp/rage
3. Wait for the message: "Forked #### childs."
4. Menu > Reset Term - Terminal Emulator will exit.
5. Launch Terminal Emulator, it Force Closes. Launch a second time, and you'll have a root shell
Click to expand...
Click to collapse
If you have a # prompt that means you have temp root, from there I would use flash_image to flash ClockWorkMod 3.0.5 to the phone (see guide)
Get ClockWorkMod here
Once you have CWM installed you can basically ignore your current OS and flash whatever you want, you can go with a custom ROM or if you don't want to do that you can go with a pre-rooted stock ROM (see this thread). In any case I would definitely wipe first (from within CWM)
Yeah, flashing a pre-rooted custom ROM is probably your cleanest solution at this point. If you want to try and fix what you have though, you can try the following steps:
1. Follow the instructions to get temp root with rage again.
2. In Terminal, try these commands and look for an error at any point (this is what the root script is actually doing, with the addition of the deletion of the xbin file/directory since that seems to be what is messing up):
Code:
# /data/local/tmp/busybox killall rage
# mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
# rm -rf /system/xbin
# mkdir /system/xbin
# /data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
# chmod 4755 /system/xbin/busybox
# /system/xbin/busybox --install -s /system/bin
# cp /sdcard/Superuser.apk /system/app/Superuser.apk
# cp /sdcard/su /system/bin/su
# chmod 4755 /system/bin/su
Flashing a custom ROM is probably easier though.
ianmcquinn said:
Yeah, flashing a pre-rooted custom ROM is probably your cleanest solution at this point. If you want to try and fix what you have though, you can try the following steps:
1. Follow the instructions to get temp root with rage again.
2. In Terminal, try these commands and look for an error at any point (this is what the root script is actually doing, with the addition of the deletion of the xbin file/directory since that seems to be what is messing up):
Code:
# /data/local/tmp/busybox killall rage
# mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
# rm -rf /system/xbin
# mkdir /system/xbin
# /data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
# chmod 4755 /system/xbin/busybox
# /system/xbin/busybox --install -s /system/bin
# cp /sdcard/Superuser.apk /system/app/Superuser.apk
# cp /sdcard/su /system/bin/su
# chmod 4755 /system/bin/su
Flashing a custom ROM is probably easier though.
Click to expand...
Click to collapse
Right now I going to try to use this command to fix the error and if it doesn't work, I will then try to flash a custom and see how that goes...Update will be posted as I go along....thanks for the kind help....
raitchison said:
Crap I typed up this response but I guess I didn't submit it because it's gone...
OK what you are saying is actually good news, it means you had temp root at one point or gfree would not have worked (you would not have S-OFF now)
If you can get temp root to work even one more time you can flash ClockWorkMod recovery and then load a custom/pre-rooted ROM.
I do suspect that you have messed up your system with your various attempts at rooting (especially the fact that you used visionary and other deprecated root methods) and you need to wipe your system and start over with either a custom ROM or a pre-rooted stock ROM.
I would start by running this section of the root process:
If you have a # prompt that means you have temp root, from there I would use flash_image to flash ClockWorkMod 3.0.5 to the phone (see guide)
Get ClockWorkMod here
Once you have CWM installed you can basically ignore your current OS and flash whatever you want, you can go with a custom ROM or if you don't want to do that you can go with a pre-rooted stock ROM (see this thread). In any case I would definitely wipe first (from within CWM)
Click to expand...
Click to collapse
I will attempt to flash ClockWorkmod, once I try out "ianmcquinn" suggesting in trying to fix the rooting error...thanks for the help
ianmcquinn said:
Yeah, flashing a pre-rooted custom ROM is probably your cleanest solution at this point. If you want to try and fix what you have though, you can try the following steps:
1. Follow the instructions to get temp root with rage again.
2. In Terminal, try these commands and look for an error at any point (this is what the root script is actually doing, with the addition of the deletion of the xbin file/directory since that seems to be what is messing up):
Code:
# /data/local/tmp/busybox killall rage
# mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
# rm -rf /system/xbin
# mkdir /system/xbin
# /data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
# chmod 4755 /system/xbin/busybox
# /system/xbin/busybox --install -s /system/bin
# cp /sdcard/Superuser.apk /system/app/Superuser.apk
# cp /sdcard/su /system/bin/su
# chmod 4755 /system/bin/su
Flashing a custom ROM is probably easier though.
Click to expand...
Click to collapse
Yes I used the wiki instruction to gain temporary root on the phone and proceeded to tryout the above command...I got mostly error with the command below is what I en-counted as I enter the command....
# /data/local/tmp/busybox killall rage
No error here just # prompt
# mount -o rw,remount -t ext3 /dev/block/mmcblk0p25 /system
No error again just # prompt
# rm -rf /system/xbin
Error "rm failed for -rf, Read-only file system"
# mkdir /system/xbin
Error "mkdir failed for /system/xbin, File exists"
# /data/local/tmp/busybox cp /data/local/tmp/busybox /system/xbin/busybox
Error "cp: can't stat '/system/xbin/busybox': Not a directory"
# chmod 4755 /system/xbin/busybox
Error "Unable to chmod /system/xbin/busybox: Not a directory"
# /system/xbin/busybox --install -s /system/bin
Error "/system/xbin/busybox: not found"
# cp /sdcard/Superuser.apk /system/app/Superuser.apk
Error "cp: not found"
# cp /sdcard/su /system/bin/su
Error "cp: not found"
# chmod 4755 /system/bin/su
Error "Unable to chmod /system/bin/su: No such file or directory
I am now going to attempt the Clockwork custom rom flash..
Folks victory is mine....No, VICTORY IS OURS, I sincerely like to thank all of you all, who replied with helpful suggesting...especially the following members "raitchison" from West Hill, CA and "ianmcquinn" a true senior member of xda-developer.
This is what I did to finally get the phone rooted....
I took "Raitchison" advice by trying to use flash_image to flash ClockWorkMod recovery... but during the process I could not get pass copying file to the phone root system folder usind android terminal emulator ...so I input this command "chmod 777/system" to gain write access to the folder...after doing that I manually moved busybox file to system folder and attempted a rooting the phone using the rooting instruction from the HTC G2/DESIRE Z wiki site...at...
http://forum.xda-developers.com/wik...cess_.28Permanent_Root_.2F_.22Permaroot.22.29
And this time around, everything went as normal after rooting the phone I open root required app and Wa La...no error message...
Guys I once again wants thank you all for the support....I also looked forward to help out others facing the same issue...so if anyone has encounter the same or similar issue please feel free to post here and I will response....
Can any one help me I am trying to close this thread...How do I go about doing it....thanks
There is no need to close the thread, if anyone has a similar problem and finds it via search they can come in here and bring the discussion back up, otherwise if there is no activity it will naturally fall to the bottom of the thread list.
It works for me I just did it yday using visionary and gfree all on my phone weird that it doesn't work for you?
Sent from my Liquid Metal using XDA Premium App
I installed everything perfectly, boot into TWRP but I was never given a prompt to install supersu. So my phone isn't rooted. I'm running Android 4.1.2 and TWRP V.2.5.0.0.
Root Access is not properly configured or was not granted.
Super User Application Status:
SuperSU application - version 2.00 - is installed!
System File Properties for Root Access:
Standard Location
Check Command: ls -l /system/bin/su:
Result: lrwxrwxrwx root root 2014-06-29 14:30 su -> /system/xbin/su
Analysis: File: su is a symbolic link pointing to another file: /system/xbin/su
Standard Location
Check Command: ls -l /system/xbin/su:
Result: -rwsr-sr-x root root 348160 2014-06-29 14:30 su
Analysis: Setuid attribute is present and root user ownership is present. Root access is correctly configured for this file! Executing this file can grant root access!
Alternative Location
Check Command: ls -l /sbin/su:
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Alternative Location
Check Command: ls -l /system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status:
SU binary not found or not operating properly
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User:
ADB shell setting for standard access, stored in default.prop, is configured as: shell (non root) user - ro.secure=1
Results provided on your SGH-T989 device by Root Checker Pro version 1.3.6 from joeykrim in the Android Market - http://goo.gl/NcnHn
Wrong forum, US variants have their own fora. Your thread belongs here, I've asked mods to move it. Sit tight until they do.
Karetus said:
I installed everything perfectly, boot into TWRP but I was never given a prompt to install supersu. So my phone isn't rooted. I'm running Android 4.1.2 and TWRP V.2.5.0.0.
Click to expand...
Click to collapse
You need to download the su zip and flash it in recovery.
Lokke9191 said:
You need to download the su zip and flash it in recovery.
Click to expand...
Click to collapse
This ^^^^^
Twrp never installed SU for me....always had to flash the zip.
KJ said:
This ^^^^^
Twrp never installed SU for me....always had to flash the zip.
Click to expand...
Click to collapse
Would you happen to have a link available? Or will any version do the trick?
Karetus said:
Would you happen to have a link available? Or will any version do the trick?
Click to expand...
Click to collapse
You should not use any version. Use the one I attached.
I thought I'd let folks know what I did in order to root on 8.5.1 and not have slowness. This isn't a complete walkthrough and assumes you have ADB drivers installed and working and access to ADB.
First I used the exploit found in this thread.
http://forum.xda-developers.com/showthread.php?t=2544736
I downloaded kindlehd2013_root.zip and also got the zip copy of superuser from
http://download.clockworkmod.com/superuser/superuser.zip
I extracted all to a folder. I then replaced the su from the kindlehd2013_root.zip with the superuser.zip armeabi folder version. Then you run the commands it has in the post.
adb push su /data/local/tmp/
adb push rootme.sh /data/local/tmp/
adb push exploit /data/local/tmp/
adb shell chmod 755 /data/local/tmp/rootme.sh
adb shell chmod 755 /data/local/tmp/exploit
Before I ran this last line I made sure su had the correct permissions:
type adb shell:
then ran the command
chmod 6755 /data/local/tmp/su
adb shell /data/local/tmp/exploit -c "/data/local/tmp/rootme.sh"
now you can get root via ADB by going into
adb shell
then run the command su
from there I made sure the su had the correct permissions again in the new location:
mount -o remount,rw /system
I had a complaint about space so I just removed the officesuite.apk in /system/apps to the sdcard
chown 0:0 /system/xbin/su
chmod 6755 /system/xbin/su
Then using the superuser.apk from the zip installed it.
adb install superuser.apk
Hope this helps others have success. From here you can follow the tutorials to get Google apps and such. I'd love to run an alternative ROM but have the LTE version and haven't been able to find one that has working LTE.
Hi Macman005!!
I want to use your method to root my Hd 8.9, I dont want too install a room, only install google services to use my chromecast. But before I want to Know:
How I move the officesuite.apk in /system/apps to the sdcard, if I have the space complaint you had?
I really appreciate any help you can provide
jaramosparra said:
Hi Macman005!!
I want to use your method to root my Hd 8.9, I dont want too install a room, only install google services to use my chromecast. But before I want to Know:
How I move the officesuite.apk in /system/apps to the sdcard, if I have the space complaint you had?
I really appreciate any help you can provide
Click to expand...
Click to collapse
On device you can use es file explorer -> enable root explorer from the left side the click on root explorer -> mount r/w -> then make sure /system is rw
Via ADB
adb pull /system/app/OfficeSuite.apk
adb shell
su for root
mount -o remount,rw /system
rm /system/app/OfficeSuite.apk
Hi Macman005
I had follow your instructions and I had manage to root my hd 8.9, total success!!!
Thanks!!
hi there folks,
so i've read through a bunch of guides and steps to accompish getting root on a kindle fire hd 8.9 running 8.5.1
i followed your above steps to the T but everytime i try and execute the exploit i get a error like this
***********
Attempt msm_cameraconfig exploit...
Detected kernel physical address at 0x80008000 form iomem
Attempt put_user exploit...
write: No space left on device
************
i read further into this post and in others that moving files around was the answer but i'm unable to move the files using
Code:
./adb shell
mv /system/OfficeSuite.apk /sdcard
i get a error like "failed cross device link"
so i'm guessing i'll only have access after rooting to move or delete files in /system
************
Code:
$ df
Filesystem Size Used Free Blksize
/dev 383M 32K 383M 4096
/mnt/asec 383M 0K 383M 4096
/mnt/obb 383M 0K 383M 4096
/system 872M 872M 0K 4096
/data 13G 372M 12G 4096
/cache 639M 10M 628M 4096
/efs 15M 4M 11M 4096
/mnt/sdcard 13G 372M 12G 4096
[email protected]:/system/app $
*********
any suggestions tips or links would be appreciated
Use adb pull to get the file out of /system/app then just try to delete it. I'm guessing it won't work though without root.
Did you check to see if su was in the /system/xbin/su dir?
macman005 said:
Use adb pull to get the file out of /system/app then just try to delete it. I'm guessing it won't work though without root.
Did you check to see if su was in the /system/xbin/su dir?
Click to expand...
Click to collapse
already tried rm -rf OfficeSuit.apk
pulling it leaves the file inplace
su is in place in xbin
Code:
[email protected]:/ $ cd /system/xbin/
[email protected]:/system/xbin $ ll
-rwxr-xr-x root shell 59392 2008-08-01 12:00 dexdump
-rwxr-xr-x root shell 63448 2008-08-01 12:00 hciconfig
-rwxr-xr-x root shell 36776 2008-08-01 12:00 hcitool
-rwxr-xr-x root shell 5608 2008-08-01 12:00 hdcp-test
-rwsr-sr-x root root 94208 2014-11-19 22:25 su
127|[email protected]:/sdcard $ su --help
Segmentation fault
139|[email protected]:/sdcard $ su touch test
Segmentation fault
139|[email protected]:/sdcard $ su
Segmentation fault
139|[email protected]:/sdcard $
i've tried tinkering with permissions with no luck
i'm not worried about root on the kindle os, i mostly want to stick CM11 on it - i recall reading a article on cyanogenmod's page about flashing the CM11 rom on the kindle it didn't mention that root was required i just kind of assumed it was to be able to install a second bootloader etc
If you don't need to follow my root you just use this tutorial. The root being slow isn't a big deal since you'll replace it with cm11
http://forum.xda-developers.com/showthread.php?t=2789289
macman005 said:
If you don't need to follow my root you just use this tutorial. The root being slow isn't a big deal since you'll replace it with cm11
http://forum.xda-developers.com/showthread.php?t=2789289
Click to expand...
Click to collapse
sweet thanks for the tip - i'll give this one a try (i'd tried a couple other methods with no success)
Everything good for me until:
adb shell /data/local/tmp/exploit -c "/data/local/tmp/rootme.sh"
Then I get:
Code:
Device detected: KFJWI (IMM76D)
Attempt acdb exploit...
KFJWI (IMM76D) is not supported.
Attempt fj_hdcp exploit...
Attempt msm_cameraconfig exploit...
Detected kernel physical address at 0x80008000 form iomem
Attempt put_user exploit...
After that nothing works. Any ideas where i might have taken the wrong turn?
Do you have su in the /system/xbin folder?
macman005 said:
Do you have su in the /system/xbin folder?
Click to expand...
Click to collapse
Thanks for reply macman.
I gave up... Followed the instructions you gave and all seemed well until step: adb shell /data/local/tmp/exploit -c "/data/local/tmp/rootme.sh"
So not sure but will check when I can try again. Would love to totally clean out amazon junk and turn into android pad.
Im having the same problem as Justanumber, and I'm not sure if I have the su in the /system/xbin folder
I was able to root 8.5.1. What I did was try the Bin4ry method, first option 1, when that didn't work option 2. It made my kindle run slow and was almost unusable. Being very patient due to the slowness, I tried the QEMU method. It seems like some things transferred to the kindle and others didn't and I got an error. I then went back to Bin4ry and ran unroot and got an error. The last thing I tried was to run root option 2 once more and success. I then went right to Hashcodes post and installed a second bootloader and cm11. I'm not a developer so I put everything I did. Maybe someone who knows what they are doing can figure out what is needed from all that. Whatever I did though, I got for on 8.5.1 without any issues once it went through
Sent from my HTC6525LVW using XDA Premium 4 mobile app
worked perfectly for me on 8.5.1, always a bit nervous messing with the kindle but no problems . Big thanks to the op. I didn't have any complaints about space, and there was none of the slowdown problems so many people complain about after rooting the new firmware. Now i have installed hashcode's cm12 port and its like a brand new gadget...
I got as far as "adb shell", but the su command returns "permission denied"
What exactly do you mean when you say "check su permissions." First time using ADB.
please help me
macman005 said:
I thought I'd let folks know what I did in order to root on 8.5.1 and not have slowness. This isn't a complete walkthrough and assumes you have ADB drivers installed and working and access to ADB.
First I used the exploit found in this thread.
http://forum.xda-developers.com/showthread.php?t=2544736
I downloaded kindlehd2013_root.zip and also got the zip copy of superuser from
http://download.clockworkmod.com/superuser/superuser.zip
I extracted all to a folder. I then replaced the su from the kindlehd2013_root.zip with the superuser.zip armeabi folder version. Then you run the commands it has in the post.
adb push su /data/local/tmp/
adb push rootme.sh /data/local/tmp/
adb push exploit /data/local/tmp/
adb shell chmod 755 /data/local/tmp/rootme.sh
adb shell chmod 755 /data/local/tmp/exploit
Before I ran this last line I made sure su had the correct permissions:
type adb shell:
then ran the command
chmod 6755 /data/local/tmp/su
adb shell /data/local/tmp/exploit -c "/data/local/tmp/rootme.sh"
now you can get root via ADB by going into
adb shell
then run the command su
from there I made sure the su had the correct permissions again in the new location:
mount -o remount,rw /system
I had a complaint about space so I just removed the officesuite.apk in /system/apps to the sdcard
chown 0:0 /system/xbin/su
chmod 6755 /system/xbin/su
Then using the superuser.apk from the zip installed it.
adb install superuser.apk
Hope this helps others have success. From here you can follow the tutorials to get Google apps and such. I'd love to run an alternative ROM but have the LTE version and haven't been able to find one that has working LTE.
Click to expand...
Click to collapse
Please help sir can you do a video of it on how to root the version 8.5.1 cause I cnt follow hard instruction pls lemme see
macman005 said:
Do you have su in the /system/xbin folder?
Click to expand...
Click to collapse
Could you specify a little on how to find this out?
I'm also getting stuck after:
adb shell /data/local/tmp/exploit -c "/data/local/tmp/rootme.sh"
"Attempt acdb explot...
KFJWI <IMM76D> is not supported.
Attempt fj_hdcp exploit...
Attempt msm-cameraconfic exploit...
Detected kernel physical address at 0x80008000 from iomem
Attempt put_user exploit...
Thanks
macman005 said:
I thought I'd let folks know what I did in order to root on 8.5.1 and not have slowness. This isn't a complete walkthrough and assumes you have ADB drivers installed and working and access to ADB.
First I used the exploit found in this thread.
http://forum.xda-developers.com/showthread.php?t=2544736
I downloaded kindlehd2013_root.zip and also got the zip copy of superuser from
http://download.clockworkmod.com/superuser/superuser.zip
I extracted all to a folder. I then replaced the su from the kindlehd2013_root.zip with the superuser.zip armeabi folder version. Then you run the commands it has in the post.
adb push su /data/local/tmp/
adb push rootme.sh /data/local/tmp/
adb push exploit /data/local/tmp/
adb shell chmod 755 /data/local/tmp/rootme.sh
adb shell chmod 755 /data/local/tmp/exploit
Before I ran this last line I made sure su had the correct permissions:
type adb shell:
then ran the command
chmod 6755 /data/local/tmp/su
adb shell /data/local/tmp/exploit -c "/data/local/tmp/rootme.sh"
now you can get root via ADB by going into
adb shell
then run the command su
from there I made sure the su had the correct permissions again in the new location:
mount -o remount,rw /system
I had a complaint about space so I just removed the officesuite.apk in /system/apps to the sdcard
chown 0:0 /system/xbin/su
chmod 6755 /system/xbin/su
Then using the superuser.apk from the zip installed it.
adb install superuser.apk
Hope this helps others have success. From here you can follow the tutorials to get Google apps and such. I'd love to run an alternative ROM but have the LTE version and haven't been able to find one that has working LTE.
Click to expand...
Click to collapse
I'm pretty proficient with ADB, so your steps were easy to follow. Now I have a rooted Kindle Fire HD 8.9 on 8.5.1.
Thank you
Hello,
I'm following these instructions. When I run su, i get "Permission Denied."
Any ideas? The steps before seem to run fine.
When i run the exploit, i see the follwing:
Device detected: KFJWI (IMM76D)
Attempt acdb exploit...
KFJWI (IMM76D) is not supported.
Attempt fj_hdcp exploit...
Attempt msm_cameraconfig exploit...
Detected kernel physical address at 0x80008000 form iomem
Attempt put_user exploit...
---------- Post added at 04:27 PM ---------- Previous post was at 03:48 PM ----------
I got it to work.
I enterd adb shell, then exploit again, without the rootme.sh argument.
Then su worked and I was able to get everything to run
Thanks for the instructions!
At first I thought it was maybe because I didnt'nt have enough free space on my sd card so I made sure I had 3GB's free but I still got this when I clicked install:
[13:04:26] Updating configuration file ... done
[13:04:27] >>> begin: install
[13:04:27] Checking mount points ... done
[13:04:27] Checking installation path ... done
[13:04:27] Making new disk image (512 MB) ... fail
[13:04:27] <<< end: install
And this when I try to reconfigure:
[13:02:49] Updating configuration file ... done
[13:02:50] >>> begin: configure
[13:02:50] Mounting partitions:
[13:02:50] / ... fail
[13:02:50] <<< end: configure
When I check my root stutus I get this message:
Congratulations! You have root access!
Super User Application Status:
SuperSU application by Chainfire - version 2.36 - is installed!
System File Properties for Root Access:
Standard Location
Check Command: ls -l /system/bin/su:
Result: /system/bin/su: No such file or directory
Analysis: File /system/bin/su does not exist.
Standard Location
Check Command: ls -l /system/xbin/su:
Result: -rwxr-xr-x root root 71264 2014-11-30 16:22 su
Analysis: Root access IS correctly configured for this file! Executing this file can grant root access! Root user ownership is present and setuid attribute is not present.
Alternative Location
Check Command: ls -l /sbin/su:
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Alternative Location
Check Command: ls -l /system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status:
Root user id:
uid=0(root)
Root group id:
gid=0(root)
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User:
ADB shell setting for standard access, stored in default.prop, is configured as: shell (non root) user - ro.secure=1
Results provided on your SM-T800 - Android 4.4.2 device by Root Checker Pro version 1.3.9 from joeykrim in the Android Market
Can anybody tell me why I get this fail message after clicking install?i
Please help
Thank You
AO!
Same issue
Im currently having the same issue with trying to install kali on my tab s. Have root and even sd formated to ext4 but still issues .
Check your SE(Linux) status on Settings / About Device. If it says Enforcing then this is the cause of the problem.
You need to change it to permissive, but you can't do it on a stock rom. You need a kernel with permissive mode
enable or a custom rom with a permissive kernel.
Good Luck
eupeso4 is wrong. You don't need a different kernel. There is an app called SELinuxModeChanger... It works charms
I've attached the app below.
soulcrusher101 said:
eupeso4 is wrong. You don't need a different kernel. There is an app called SELinuxModeChanger... It works charms
I've attached the app below.
Click to expand...
Click to collapse
Also, go to terminal emulator after this.
Code:
su
getenforce
If you get "Enforcing" as a response, it's FUBAR. you can try to run the command "setenforce 0" as su as a workaround but if the app didn't work, it won't likely work either.
Molikai1988 said:
Also, go to terminal emulator after this.
Code:
su
getenforce
If you get "Enforcing" as a response, it's FUBAR. you can try to run the command "setenforce 0" as su as a workaround but if the app didn't work, it won't likely work either.
Click to expand...
Click to collapse
Okay i got enforcing. my deviceis SC-04E thats is S4 (docomo). i want to set SE Linux to premissive tell me the solution
soulcrusher101 said:
eupeso4 is wrong. You don't need a different kernel. There is an app called SELinuxModeChanger... It works charms
I've attached the app below.
Click to expand...
Click to collapse
Doesn't work on stock kernels.
I tried everything. But it doesn't work even after changing the SELinux to permissive., But after searching a lot, I found a thread which said me to change the partition to ext2. I changed the partition and then it all worked like charm.., If you still have issues, follow the guide in this link from start to end-https://github.com/meefik/linuxdeploy/issues/183, This solved most of the issues I had..
Linux Deploy Mounting Partitions Fail
Bro problem solved by me..
Check out this video
https://youtu.be/n5opus76c3k
So I rooted my phone used it for a bit then for some reason it messed up so I bought root checker pro and it said Root access not properly configured or granted.
Superuser Application Status
NOT installed: Superuser by ChainsDD, SuperSU by Chainfire, or Superuser by Koush
System Files Status
Standard Location
Command: ls -l /system/bin/su:
Result: /system/bin/su: No such file or directory
Analysis: File /system/bin/su does not exist.
Standard Location
Command: ls -l /system/xbin/su:
Result: -rwxr-xr-x root root 66916 2015-01-23 18:48 su
Analysis: Root access IS correctly configured for this file! Executing this file can grant root access! Root user ownership is present and setuid attribute is not present.
Alternative Location
Command: ls -l /sbin/su:
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Alternative Location
Command: ls -l /system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
User and Group ID Status
Error: stderr: [-] connect ui: Timer expired, stdout: null, exit_value: 1
ADB Shell User Status
ADB setting for shell access, stored in default.prop, is configured as: shell (non root) user - ro.secure=1
System Environment PATH Status
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
Results provided for your SGH-I747M - Android 4.3 device by Root Checker Pro version 1.4.2 from joeykrim in the Android Market - my device is an android Galaxy s3 version is 4.3 and I'm not running a Rom and I used towel root please help I can't find the solution anywhere
Hi there,
Please wait until mods will move this thread to the device specific forum.
Stand by
The simplest way to get root in my opinion is to flash Philz Touch recovery for the d2lte using Odin. Then flash super su from recovery, boot phone, let supersu and disble knox, reboot phone, done.
I have an Alcatel ideal 4060a and it's does the exact same thing an says the same when I do my root checker. What do I do to get my root back?
If you have an older kernel, made on or before May 2014, then you can use towel root to gain root.