Related
Hey guys !
I've just bought the Asus Zenfone 2 Laser ZE500KL, and I tried to root the phone. But I don't know why, the phone is blocked on the screen "Asus in search of incredible"...
I'm on Ubuntu, I've tried to flash a ROM Stock with sideload, update from ADB. But after the installation of the ROM, when I reboot, the same problem happened.
Please help me, I'm just so desperate ! If you have questions, just ask.
Try to boot into Recovery and Format the mobile, (Wipe Cache/Data/System).
...
I Think you have now how to boot into Recovery Menu.
But Still i providing the Boot into Recovery mode with below steps:
1. Press Power Button + Volume Up Key
2. Then from Fasboot option - use Volume Key and choose Recovery Mode, press Power Button.
3. If it booted in Recovery Menu with Sleeping Android and Error, then Press
4. Again Volume Up Key and Power Button, leave Power Button immediately after 1 or 2 seconds.
5. You See normal Recovery Menu, from here you Reset Your Handset. / Format...
------------------------------------------------------
IF I AM HELPED YOU, PRESS Thanks Button
------------------------------------------------------
k576 said:
Try to boot into Recovery and Format the mobile, (Wipe Cache/Data/System).
...
I Think you have now how to boot into Recovery Menu.
But Still i providing the Boot into Recovery mode with below steps:
1. Press Power Button + Volume Up Key
2. Then from Fasboot option - use Volume Key and choose Recovery Mode, press Power Button.
3. If it booted in Recovery Menu with Sleeping Android and Error, then Press
4. Again Volume Up Key and Power Button, leave Power Button immediately after 1 or 2 seconds.
5. You See normal Recovery Menu, from here you Reset Your Handset. / Format...
------------------------------------------------------
IF I AM HELPED YOU, PRESS Thanks Button
------------------------------------------------------
Click to expand...
Click to collapse
I've tried to format the mobile (all wipes) but it's still don't boot and stay blocked on the asus logo...
Maybe I should flash a firmware stock, but wich ? With which recovery img ? Tanks in advance
Tituxxx said:
Hey guys !
I've just bought the Asus Zenfone 2 Laser ZE500KL, and I tried to root the phone. But I don't know why, the phone is blocked on the screen "Asus in search of incredible"...
I'm on Ubuntu, I've tried to flash a ROM Stock with sideload, update from ADB. But after the installation of the ROM, when I reboot, the same problem happened.
Please help me, I'm just so desperate ! If you have questions, just ask.
Click to expand...
Click to collapse
MANUAL UPDATE FOR ASUS ZENFONE LASER (ZE500KL/ZE550KL)
download from:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550KL/UL-Z00L-WW-1.15.40.639-user.zip
* This method is only recommended for those who cannot update their phone into into the latest version thru OTA (Over-The-Air)
* Wiping the cache partition is recommended but not required!
Tutorial here: goo.gl/0OxgAa
--------------------
Do at your own Risk
--------------------------
----------------------------------------------------------------------------
Press Thanks Button, if i am helped you
----------------------------------------------------------------------------
k576 said:
MANUAL UPDATE FOR ASUS ZENFONE LASER (ZE500KL/ZE550KL)
download from:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550KL/UL-Z00L-WW-1.15.40.639-user.zip
* This method is only recommended for those who cannot update their phone into into the latest version thru OTA (Over-The-Air)
* Wiping the cache partition is recommended but not required!
Tutorial here: goo.gl/0OxgAa
--------------------
Do at your own Risk
--------------------------
----------------------------------------------------------------------------
Press Thanks Button, if i am helped you
----------------------------------------------------------------------------
Click to expand...
Click to collapse
will this work on Z00ED model?
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...
Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
does anyone enable lte bands, 4 and 28?
just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI
Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????
Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!
Does this work for s5 pro l58041?
Thanks
B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!
Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...
so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os
I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img
Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
has anyone achieved unlocking bands in this phone?
Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try
Could you plz make tutorial about getting back to stock unroot...thx
Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Nice job
this will work with BTK5 fw?
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
PetiHun08 said:
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
Click to expand...
Click to collapse
UPDAAAATE. Reflashed everytrhing tried again and works on btl3+ sm-a505fn/ds eu model
shoosterjonesr said:
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Click to expand...
Click to collapse
U need to flash multidisaabler
Will this work on an A50 witn the Android 11/ OneUI 3.1 update? Because I got nothing but errors and bootloops trying to root that, while I had no problems with an Android 10 version.
IF i dont have an sd card can i sideload
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.ifpatched
Credit to mohitmallick17
Click to expand...
Click to collapse
if i have no sdcard can i sideload multidisabler?
PetiHun08 said:
IF i dont have an sd card can i sideload
if i have no sdcard can i sideload multidisabler?
Click to expand...
Click to collapse
after format data just copy multidisabler to internal storage
Ok with mtp obviously. Thank u
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Click to expand...
Click to collapse
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
PetiHun08 said:
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
Click to expand...
Click to collapse
Got back to stock rom. Plz help
PetiHun08 said:
Got back to stock rom. Plz help
Click to expand...
Click to collapse
I think boot.img isthe problem. Maybe can i fiish if i flash twrp with no magsk?(btw my phone has no ramdisk)
Still waitin
Will this work for A50s FN ?
Right now it is flashed with TWRP 3.3.0, but I want to upgrade to Android 11 and is looking for suitable TWRP upgrade. It's my main phone so I can't risk have it bootloop
Hi,I unlocked bootloader,but canot install Twrp.in odin,it always failed.Help ?
What error
PetiHun08 said:
What error
Click to expand...
Click to collapse
In odin it faild,I realise,I'm on exynis version,but cenot finde exynos version of twrp.
I have exynos a50 and mine is forking fine. Ehat error do odin gives you?
I am not responsible for any damage to your device, when you root you lose the Warranty
This guide collects A107F development info, but with the files ported to the A107M.
Thanks to the Galaxy A10s Development team for the original files.
You need to be on Android 10, if you are on android 11, there are tutorials to downgrade.
[BootLoader Unlock]
- Backup all your media, this process will delete your internal media including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode (Turn off, press VOL- & VOL+ and connect the USB)
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Perfect! Your bootloader now accepts unofficial images in download mode.
[Twrp Install]
At this point, you will need to install Odin on your PC.
Bootloader unlocked is OBLIGATORY.
On your MicroSD, put the "A10s-encryption-disabler.zip" file.
Boot to download mode, load "VBMeta" file in AP and "TWRP Ported to A107M" file in BL
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- With the USB connected, and after the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP Recovery
NOTE: TWRP on this phone is not perfect, after booting to it, the screen will remain black after the Samsung logo disappears, simply wait 10 seconds and press the power button 2 times to have acces to it.
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the "A10s-encryption-disabler.zip" with TWRP. This is done to avoid future bootloops.
- Optional, flash "Magisk.zip" if you want to keep on Stock ROM with root.
- After doing this, boot back to system and you are done
- Wait patiently for the device to boot for the first time
[Custom ROMs Install]
Bootloader unlocked and TWRP isntalled are OBLIGATORY.
Most of the GSI ROMs of this forum works fine on this device.
Only download a64 ROMs, do not confuse with ARM64.
On your MicroSD, put the ROM image.
- Boot to TWRP
- Go to Wipe > Advanced
- Wipe ONLY the System partition
- Go to Install
- At the bottom, select option "Install Image"
- Search for your GSI. It should be something that ends in .img. If it ends in .xz instead, you need to extract the image first
- Optional, if you want Root, flash the "Magisk.zip" file
- Go to recovery main menu
- Go to Reboot
- Reboot to Recovery
- After that, go to Wipe and perform a Factory Reset
- Reboot to System and enjoy!
[Downloads]
>Everything you will need<
I had a problem in Odin an "RQT-CLOSE" error occurred
Lukas203 said:
I had a problem in Odin an "RQT-CLOSE" error occurred
Click to expand...
Click to collapse
I GOT THE SAME THING WHATS HAPPENNING?
Worked perfectly on a107m with binary 6
Alexander_SlowD said:
Worked perfectly on a107m with binary 6
Click to expand...
Click to collapse
If it worked for you, what procedure did you follow? What rom did you use for bit 6? what tools did you use?
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Luciannus said:
It worked for me at first time I see TWRP menu but I didnt followed the instructions correctly , I've tried to do it by myself after that , then I got a unnoficial bootloader error and RQT_CLOSE error when trying to do the Odin process again .
Any working solution are welcome and I will be thankfully , please !
Click to expand...
Click to collapse
The TWRP is slready working for me , now I trying the Magisk part , I did this on Android 11 binary 6 trough A107MUBS6CWA3_ZTO firmware ...