tried IRS below to test it out and it worked great back on KitKat
SRS Audio HD [SRS GEQ - Acoustic + SRS TruBass - 50% + SRS Dialog Clarity - 50%]
I finally updated to lolipop, i have V4a working except the IRS file isn't being detected.
Beats Audio for example works just fine, but nothing changes when i go to the SRS irs above.
Any advice? I've posted in nearly every V4a thread i could find and i keep getting told to reach out to maker of IRS file :\
Device: Nexus 7 2013
OS: 5.1.1.
Rom: Optipop
Kernel - Elemental X
SElinux - permissive
No other audio processors installed
BusyBox on rails installed and ran
Media Player: Power amp.
Prior on Kitkat, i had to install it as a user app, and then use the banned app to move it to system\app in order to get all IRS files to work. IRS files are crucial to me because i use my N7 2013 in dash in my car.
On lolipop, no matter what method i use (whether i install apk, move apk to system\app or flash viper4android zip files), i can get it to process audio under poweramp, but irs files aren't being truly recognized (some are)
Any suggestions?
P.s. - i have been using the following two zips from these threads :
http://forum.xda-developers.com/lg-...-viper4android-lollipop-t3075794#post60588642
and
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
as well as the apk from the official site.
EDit: read the last 3 pages, I will try the APK method on it's own as a user app, will report back.
Edit: installed 4.x apk , installed drivers , set my settings, rebooted, used the "banned" app to move to system app. Convolver IRS files work flawlessly, and i have to set it to compatible mode, but now i have constant popping in audio :\
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
tamanaco said:
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
Click to expand...
Click to collapse
I used version 2.0.2
It worked fine in changing it (latest one didn't).
Also, it's processing, it's the Convolver and IRS that isn't.
bump
help
bump!
interesting turn of events, i used the lolliviper zip above in the links, and then moved it manually back to user app but left the preinstalled drivers and audiopolicy included in the zip in the system files.
v4a disappeared, okay no biggie, reinstalled the apk from the official site, settings were all there, drivers were already installed from prior installation. Poweramp works, all irs files work, no cracking or popping.
What a complicated route to take to make sure all irs files and poweramp to work, but the audiopolicy is key, i can upload it for those who are interested to decipher for me what i cannot specifically
bump
Still need help, 3.5mm connection via n7 2013 on power amp +5.1.1 + v4a = static and popping
Has anyone successfully testing ViPER4Android or display manager, Or any equalizers for music? I need some guide.
I followed these steps for V4A and it's working great thus far:
http://forum.xda-developers.com/showpost.php?p=63727541&postcount=19
Any1 of you got a V4A or Dolby MOD (magisknor non magisk) working with the MI 9 SE?
Tried several V4A mods but none of em works(installing drivers fails every time)..
Also tried dolby pie which instantly crashes when opening the dolby app..
fyi - got both v4a and dolby working. needed to switch kernel to permissive for installation.
working like a charm. dolby pie is superior.
fattymcdirty said:
fyi - got both v4a and dolby working. needed to switch kernel to permissive for installation.
working like a charm. dolby pie is superior.
Click to expand...
Click to collapse
Is it working in miui? Can you share the flashable permissiver?
It's not a flashable.. it's an apk:
https://forum.xda-developers.com/android/apps-games/app-selinux-switch-t3656502
And that the V4A I use after gaining permissive kernel through the pp:
https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Anf that's the dolby pie for magisk:
https://drive.google.com/open?id=1y5Zdh95mAS4JU04qus43DgZcBevMokky
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
rohithksaj said:
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
Click to expand...
Click to collapse
Remove whatever you installed completely. If there's an uninstaller, use that. Install the LegacyFX module through Magisk. Just follow the installer prompts, vol + or vol -, for which options you want. (I chose the older version 2.3.) At the end you can choose to make it a system or user app; I chose system. It works fine.
The device has rooted magisk
my audio experience on 1 + 5t is amazing 1 stereo system on iphone headphones you just need to install the magisk ainur sauron + viper4androi module and fix packages so that it combines together into a perfect effec combination Here you will see the power of the lord when listening to music on spotify
Experience after many trial order installation
1: ainu sauron
2: viper4andoid
3: audio compatibility patch it will create a link
4: audio modification lybrary: the module to work well on the music player is acp.zip you will find it in the link below
5:Add Dts headset port
Just the order above is enough to make you perfect sound
After having all the mods above, you will see viper4andoi change the color of the sign that it is working to enjoy the sound of the lord of the ring.
i can't upload the link you just need to search on google on "Ainur saron"
There are 2 versions for me to choose sauron
download latest 2.7 from xda lab
download and install audio modification library
open viper install driver and reboot
Hello.
Before rooting i want to know which audiomods I can install via magisk.
Viper4android
Is Dolby Atmos (or Dolby Digital) working?
Using wavelet with all presets making it like Viper almost.
Please; sound mods for our device.
/ "Audiophile"