Related
I cannot install any apps on my phone
Thanks for that very descriptive post on the problems you're having. Should make it easy for others to help you figure it right out.......
HipKat said:
Thanks for that very descriptive post on the problems you're having. Should make it easy for others to help you figure it right out.......
Click to expand...
Click to collapse
Yea man, you aren't going to get any help without giving us more details.... What kind of apks? Where are they from? What do you mean you "can't install them"? Does it give you an error? Are you rooted? What rom? What kernal?
I had this issue a while back, go into Titanium Backup and fix permissions.
It's worth a shot.
market wont load
I installed destroyer rom on my HTC evo 4g, I have android version 2.3.3, kernel version 2.6.37.3-cyanogemmod-0123-g53c6890 [email protected] #1, (whatever that means), CPU info ARMv&7 processor rev2 (v7l), MOd vers cyanogenmod-7.0.0-rc2-supersonic-kang, build # GR140. I hope all this info helps, wasnt sure what you guys would need to help fix problem but here is whats going on.
when i click on the market icon , it acts like it wants to load but doesnt, if i clear data, it then asks to create google account,..I have a google account, but when i click okay to create google account it doesnt do anything..
not sure if this is related but also tried to install flash player and it would install..
I am really new to this, and probably shouldnt have attempted to root my phone and install other than stock stuff...but everything else works and its definetly really fast, and cool...
any suggestions
Also; i installed the new market apk. 3.3.111 , i think?,..same thing = says "must add an account to the device to continue. do you want to continue...i click yes,,and NOTHING
Please Help!!!!!
For one thing, Destoyer was based on Android 2.1 I'm pretty sure, so that COULD be an issue. I mean, it's a pretty old ROM.
Hey man, I say flash a new rom, try some of these listed below
e3d shooter port (has 4g and sense 3.0)
Synergy (4g and sense 2.1 also extremely stable) - my daily driver
FEARmede (no 4g, runs sense 3.5) - Jared and dropzero work hard on this and things are getting fixed everyday.
if you like aosp try
cyanogen mod (4g very stable, have to install gapps to get market)
miui (no 4g, very clean ui, iphone replica almost is your an iphone fan)
savage mod 1.4 (4g, stable, the rom i run when using aosp)
I am running cm7.1 I cannot install any non market apps unknown sources are checked but I cannot get apostle to install. I get to the install screen try to push the button and it dose nothing. I have the stock kernal. Also since o Jane upgraded to 7.1 my video chat dose not work I use oovoo because this is the only app that work on Canada to US.
Have you seen this post?
http://forum.xda-developers.com/showthread.php?p=20441849#post20441849
Not sure if it will help, but it certainly did the trick for me.
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet? How stable is it?
I found the link here: http://true-android.blogspot.ca/2014/03/update-samsung-captivate-glide-sgh-i927.html
I also dont know, for any rom that has separate gapps, when would you flash those? After or before the new rom? at the same time? Like, if after a ROM flash it automatically reboots, it will boot up with no gapps and likely not run - correct?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Pawprints1986 said:
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet? How stable is it?
I found the link here: http://true-android.blogspot.ca/2014/03/update-samsung-captivate-glide-sgh-i927.html
I also dont know, for any rom that has separate gapps, when would you flash those? After or before the new rom? at the same time? Like, if after a ROM flash it automatically reboots, it will boot up with no gapps and likely not run - correct?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Click to expand...
Click to collapse
you can find more information here: http://forum.xda-developers.com/showthread.php?t=2541182
Gapps is included. You must install rom zip first, because it formats system partition.
Official gapps doesnt compatible with our phone, I think its better not installing.
hmm..
Pawprints1986 said:
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Click to expand...
Click to collapse
I am using omni ROM . . somehow I find it less buggy than cm 11
Nevertheless I would wanna give my thanks and even though I am pointing out bugs . . I really do appreciate his work .. A lot
Omnirom is very very stable has all if not most of the theming features except for trebuchet launcher
//It is a bit more battery consuming but I like it cause I am able to run my processor at 1.4ghz which is sweeeet!!!
//It has issues with OK Google functionality the audio is lagged and irritating
//The Google experience launcher is not built for it
//It has issues with Google maps 7 but there is a fix to have 6th version to back you up when needed
//it has issues with Skype and the fix is work in progress I guess..
//GPs is a bit slow but works
//WiFi direct crashes for me
Once in a blue moon the phone might rebot itself cause of a crash..
Though considering WiFi tethering , 3g switching, link2sd ,memory swapping
Ksm everything is working really try it . . its an amazing experience from an amazing phone
Can someone tell me the difference between wifi direct, wifi sharing, and wifi sharing manager??
Wifi itself is working in 4.4.2 right?
Also, were your keyboard backlights working automatically or did you ened qwerty led?
is qwerty led something that needs to be running all the time. or "ongoing" in the top drawer?
Wi-fi direct is a type of communication between two devices, similar to Bluetooth, so you can send files. I never used this, even when transfering big files from one phone to another, it's better to use an USB OTG cable - the connection speed is lightning fast!
Don't know what you mean about wi-fi sharing. Maybe wi-fi tethering (hotspot) - it's when you share your phone 2G/3G internet connection via wi-fi. This thing is working fine. Wi-fi itself is working, of course.
As for keyboard light: when tested OmniROM, I used liblight solution, but the qwertyled using is simple too: just launch it and you're done. While the service is running, keyboard light will work.
Now I'm on CM 11, and I have 11 days of uptime already, I recommend this ROM (but that's just my taste). In CM 11 keyboard backlights are working from the box, no need for qwertyled.
Also, I looked at the link you posted, to the true-android blog. Please, don't use the guide one can found there, it's awful. You can't install 4.4.2 ROM with recommended 2.6.3.0 TWRP, the correct one is 2.6.3.1 from bubor here, and you don't need any gapps beside included in the ROM.
Better use this guide from stormdude124: [UPDATED][2014][How-to]Everything you need to know and do to your Captivate Glide, it's updated, it's verified and there's no ads!
Makshow said:
Now I'm on CM 11, and I have 11 days of uptime already, I recommend this ROM (but that's just my taste). In CM 11 keyboard backlights are working from the box, no need for qwertyled.
Also, I looked at the link you posted, to the true-android blog. Please, don't use the guide one can found there, it's awful. You can't install 4.4.2 ROM with recommended 2.6.3.0 TWRP, the correct one is 2.6.3.1 from bubor here, and you don't need any gapps beside included in the ROM.
Better use this guide from stormdude124: [UPDATED][2014][How-to]Everything you need to know and do to your Captivate Glide, it's updated, it's verified and there's no ads!
Click to expand...
Click to collapse
Can you use a cyanogen mod rom with clockworkmod recovery installed? i remember trying cyanogenmod with my phone and couldnt get it to work.
Just flash TWRP 2.6.3.1 from link above, it's superior to clockworkmod recovery (CWM) in all ways: touch interface, working backups with compression, charging support and it allows to install KitKat roms. With CWM you can install ROMs up to android 4.3, so, you still can install CM 10.1.3 or CM 10.2 with CWM, but not CM 11.
about wifi direct and sharing...
Pawprints1986 said:
Can someone tell me the difference between wifi direct, wifi sharing, and wifi sharing manager??
Wifi itself is working in 4.4.2 right?
Also, were your keyboard backlights working automatically or did you ened qwerty led?
is qwerty led something that needs to be running all the time. or "ongoing" in the top drawer?
Click to expand...
Click to collapse
Hey yeah the difference btw wifi direct and sharing is that in wifi direct you connect two devices directly to transfer files...
in wifi sharing you need to host a web adress to share your files
as a result in wifi sharing you host a list of your stuff on a web adress(local) which gets downloaded by other devices on your wifi connection
and a wifi sharing manager can either do this (host ur files using an ip) or my personal favorite is astro which can acess my pc's sharing folder over wifi which is preety awesome>..unlimited storage
also note that in a wifi sharing manager you cannot recieve files easily . . maybe airdroid but it can only run on a pc
wifi sharing apps are airdroid and other file managers like root browser
wifi direct requires specific drivers and libs... i guess.. hence not all devices can do it ..
anyway you should go for cm 11 or omni both are incredibly stable with an occasional hiccup.. which is occasional heh
also would suggest that if you do proceed to install please follow from the developer sources on xda rather than some blog etc
UNOFFICIAL CyanogenMod 11.0 BETA V0.3
by MisjugdedTwat a.k.a. BangL
WHAT IS THIS?
This is an UNOFFICIAL build of CM-11.0 ( CyanogenMod 11.0 ) for Huawei Mate (hwmt1_u06)
I am basically just continuing the work of others by merging and compiling, so credit goes to surdupetru, joestone, asyan4ik, mrAlmid and all coders who contributed to CyanogenMod.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
REMEMBER
If you choose to use my unofficial build, pls don't post your issues and/or request in the official CyanogenMod forums. My builds contain unofficial code and MAY affect the official debugging process.
I do this in my free time, for free. Never forget that
Take care and do backups before flashing!
FIRST INSTALLATION (of THIS rom)
!!! BACKUP EVERYTHING !!!
Make sure your bootloader is unlocked, and install TWRP 2.8.1.0
Download the ROM, and put it on your SD-card
Download Gapps, and put it on your SD-card (optional)
Boot into TWRP
Do a FULL WIPE (system, data, cache, dalvik) ! - you can try to keep data, but it will most likely fail booting.
Install the ROM, using TWRP
Install the Gapps, using TWRP (optional)
Reboot to system
UPDATE INSTALL (when you already have another version of this rom installed)
Download the ROM, and put it on your SD-card
Download Gapps, and put it on your SD-card (optional)
Boot to recovery
Wipe system
Install the ROM, using TWRP
Wipe cache & dalvik
Install the Gapps, using TWRP (optional)
Reboot to system
LATEST CHANGES
V0.3
V0.2
CM SOURCES MERGED UP TO:
Change 110843 - manifest: Remove vendor/cyngn repo
http://review.cyanogenmod.org/#/c/110843/
INCLUDED KERNEL
whirlwind.kernel
KNOWN BUGS
a2dp is not running perfect, but it runs. - sometimes.
Nfc is probably not working at all, not sure.
GPS acts a little weird sometimes.
Video compression results in pure trash.
Clock might get desynced
DOWNLOADS
Please note this build is for bug-hunting purposes only, yet! (Plain CM is boring anyways)
I am just starting to build for this device and with this build am currently trying to get a stable basis for other roms.
My goal is having a fully working code-base for any AOKP-based 4.4 ROM.
So PLEASE join the testing phase, try every ****ing functionality on your phone and report the results here, so i know whats done and what needs to be done. Thanks!
Rom
https://www.dropbox.com/sh/gd42e500zsrl7e0/AACjh4We8ZjULayjWFL7Y1lla?dl=0
Gapps
Use any "ARM - 4.4" package from open gapps (i recommend the nano variant)
Bootloader/Recovery
If you are still on a locked bootloader, having an unrooted stock rom, or an old twrp installed, use this updated unlock/recovery suite for windows and linux:
TWRP 2.8.1.0
SOURCE CODE
https://github.com/hwmt1-u06/android
NOTICE:
I removed the asound codecs, which increases the sound volume dramatically. I wanna enjoy my music loud, when i'm sitting in the bus!
This kinda ****s up the speaker, since its too loud now, which causes clipping.
I use the Equalizier in CM's DSP Manager to reduce the speaker volume (by turning all levels around -6db)
Having loud volume, and the ability to decrase it, is better than having silence and no ability to increase it, right? Thats like going to the hair stylist and wanting longer hair.
Cool, thanks for your effort!
Will give it a try when I feel I have enough time
UPDATE V0.2
CHANGES
Fixed rebooting to recovery
Changed some default system props related to adb and root
Thats it, any bugs?
Otherwise i will now focus on porting more aokp roms, building twrp and a maybe a kernel.
Hi,
is NFC functional in this ROM?
(In B331 is not.)
Stutter bluetooth audio sometimes?
(In B331 there is)
sijben said:
Hi,
is NFC functional in this ROM?
(In B331 is not.)
Stutter bluetooth audio sometimes?
(In B331 there is)
Click to expand...
Click to collapse
Its probably both messed up as well in this ROM, i don't have the hardware to test those functions. Maybe you can tell me
Misjudged, in your instructions I see a clear distinction between a "first time install" and an "update install".
What is the difference between the two?
I mean, I get an idea what it is about but do not feel confident to base a decision on.
SvenHee said:
Misjudged, in your instructions I see a clear distinction between a "first time install" and an "update install".
What is the difference between the two?
I mean, I get an idea what it is about but do not feel confident to base a decision on.
Click to expand...
Click to collapse
its meant like this:
- first install the first installation of THIS rom
- update install is when you already have this rom installed (e.g. v0.1) and you wanna update to another version of this rom (e.g. v0.2), and keep your apps, data and settings.
and remember to backup first!
EDIT: Updated instructions in first post
Very good, thanks!
Okay been giving this CM11 ROM a test drive this week on my Mate. My Mate is the 1 gig version and I have a bad case of call ? screen delay on this ROM. Is there a patch that can help with this? I will admit though that I probably expect too much from my poor little Mate because I have tons of apps on it
I must say though your ROM is the smoothest running ? CM11 ROM I've tried. Good job.
If I could only get rid of or just reduce the call screen delay I could run ? this as my daily driver. But this week I just missed too many calls due to the call ? screen delay.
Keep up the good work. You can depend on me to test any ROMs you put out. :thumbup:
sent from my MT1-U06 using Tapatalk 2
Flashed it on my P6, replaced the kernel with the AK cm kernel for P6 and switched to ART. Very smooth rom, havent seen any issues or bugs yet except the wifi dropping, which does not mean much as it instantly reconnects. Good job.
Edit: Don't know about the ascend Mate but on the P6 OTG is fully functional and stable.
after 24 hours of being my phone:
Bluetooth audio gave me a full cd instead of less than one song, gps works.
I only miss pie control, but that in not CM if I read correctly.
Keep up the good work!
Would love to try your version of carbon rom, if you get round to that
Thanks for tests your reports, guys!
let's see..
SvenHee said:
after 24 hours of being my phone:
Bluetooth audio gave me a full cd instead of less than one song, gps works.
I only miss pie control, but that in not CM if I read correctly.
Keep up the good work!
Would love to try your version of carbon rom, if you get round to that
Click to expand...
Click to collapse
Wait.. what? Are you telling me a2dp is working perfectly fine? I did not expect that at all!
Yeah, i will port more ROMs, but first i had to have my own kernel (see below) :fingers-crossed:
blankulus said:
Okay been giving this CM11 ROM a test drive this week on my Mate. My Mate is the 1 gig version and I have a bad case of call ? screen delay on this ROM. Is there a patch that can help with this? I will admit though that I probably expect too much from my poor little Mate because I have tons of apps on it
I must say though your ROM is the smoothest running ? CM11 ROM I've tried. Good job.
If I could only get rid of or just reduce the call screen delay I could run ? this as my daily driver. But this week I just missed too many calls due to the call ? screen delay.
Keep up the good work. You can depend on me to test any ROMs you put out. :thumbup:
sent from my MT1-U06 using Tapatalk 2
Click to expand...
Click to collapse
ive already patched in a tweak to help that problem atleast a little, i am not sure if theres more i can do.
as far as i know it's a well known jb/kk-problem on devices with very low ram... i had an LG O2x, which hab like 500MB ram or something... it was pretty much ununsable when someone called. i remember something like they started to remove the incallUI from the permanently-open list - if you know what i mean. and that's why it's causing this problem.
i don't really have this problem at all, to be honest. so maybe you can help it by removing some service-apps.. or maybe theres some app to force another app to stay loaded? i don't know, just an idea.
tauio111 said:
Flashed it on my P6, replaced the kernel with the AK cm kernel for P6 and switched to ART. Very smooth rom, havent seen any issues or bugs yet except the wifi dropping, which does not mean much as it instantly reconnects. Good job.
Edit: Don't know about the ascend Mate but on the P6 OTG is fully functional and stable.
Click to expand...
Click to collapse
arg... P6? different kernel?
so your report doesnt really help me, since i dont even know what the exact differences between the MT1 and the P6 are, and most off the hardware related stuff is kernel related!
Good to see it's running well for you, though.
But thank you very much, srsly.
btw: you are having the wifi dropping too? thats weird, i was sure thats a kernel & /system/lib/modules thing.
...which is why i focused on kernel building for now. It seems like some people are smashing any modules they can find at their kernel until it works somehow. - this is a huge mistake. kernel modules in /system/lib/modules MUST be built against the exakt same kernel, they will be used on.
To be sure to have that clean, i felt like i need to get into that stuff as well. - and i actually just succeded like 30 minutes ago.
I will try out some things on this build, and when everything seems stable to me, i will even release my own kernel, which will always be shipped with the correct modules
But that will be HIGHLY experimental, and for the MT1 only!
Only had minor hiccups when browsing the internet at the same time.
Now testing the second session of music
Edit: A few more hiccups in one session, pretty good play a bit later. Very usable.
Installed and so far its very smooth
Maps thinks I am at a different road every now and then, causing strange new rout options. But this corrects quickly.
Can not get navigation started by clicking address in calendar appointment, then maps keeps restarting. Had the same thing with Mr. Amids carbon rom.
It does start from clicking icon and copy/paste the address.
SvenHee said:
Maps thinks I am at a different road every now and then, causing strange new rout options. But this corrects quickly.
Can not get navigation started by clicking address in calendar appointment, then maps keeps restarting. Had the same thing with Mr. Amids carbon rom.
It does start from clicking icon and copy/paste the address.
Click to expand...
Click to collapse
interesting.. is there any cm based rom, where you dont have that problem?
Carbon was the only 4.4.4 rom by Mr. Amid I got working, I know now (with your explanation) that I should have wiped data too when flashing a new rom.
I can not recall having the Maps problem with 4.2 roms.
UPDATE V0.3
CHANGES
Fixed /data/share paths in frameworks-base and system-core
System-props and init.rc script optimization
Using wpa_supplicant_8_ti instead of wpa_supplicant_8
Prebuilt B331 kernel and kernel-modules removed
Built whirlwind.kernel #2 from sources
Built wifi modules against whirlwind.kernel #2
Is a2dp, gps and wifi better with this build, or maybe even worse?
Will I be able to upload videos to instagram ?
I have been browsing the forums for quite some time now and I have tried alot of roms. Every rom I have tried, has failed or is no longer supported. Can anyone reading this post please share a link or any other information regarding this help. I have the 5110 version note I appreciate all the help I can get.
Sent from my GT-N5110 using XDA Free mobile app
Anyone
Sent from my GT-N5110 using XDA-Developers mobile app
I forced myself to break away and lightly customize a stock ROM made for a provider. It is the only stock ROM that has stagefright fix which is way cool, and a few other usabililty fixes as well. Must allow security update to patch, it helps correct a few wee bugs.
The big issue... you are forced to keep a new boot loader, and cannot revert to any previous Stock ROM, and must deal with boot loader compatibilities unknown by builders as they have stopped with any new builds .
Downside, the new bootloader effects various Root functions. But newer Super Su, Boeffla utility, and other updated older Xposed modules seem to help with the new boot loader. Plus Default Apps no longer lists, but they can be managed through App Manager.
A custom SecSettings from a Note 2 (S5 varient) will bring back the Default Apps function plus many hidden settings options built in thus latest OEM build.
So, if you want all the bells and whistles, you will have to deal with the bugs, no matter how big or how small.
Now to explain what features I had with Gnabo v8 SE that I don't miss at all.
Mag UX, Tab Keyboard, Spen Air Command, 160dpi, Multi boot menu, and enhanced wallpaper picker.
Features I have and use, and are bug free but need a system UI to use them... tested with a custom Note 2 Secsettings that has some issues because it is a S5 variant and made for Note 2 specifically.
Colorblind, Interaction Control, Face Lock (came with my OEM build), Grey Scale (built in partially with new build, but S3 neo System UI is the key), Apps from a broken and defunct custom ROM for the N5110, Quick Connect 1.6.5.
My issues are minimal, but seem to be plagued by the new boot loader more than the ported apps.
Miracast works best, 3 minutes after reboot. WiFi is not stable after using hooked VPN apps of any type. Disabling WiFi for a minute and re enabling corrects the issue 80% of the time. A reboot may need to be done if WiFi is buggy. Reboots are 75% trouble free. Sometimes you get a fast boot soon after system UI loads, sometimes you get GMS forced closes, and must reboot.
It may be because of Triangle Away not being upgraded to work with newer boot loaders, or SU still needs some tweaks to work around the latest build by Samsung.
If I were stubborn I would stick with Gnabo v8 SE and it's patches and run Boeffla kernel, and just deal with 160dpi. But I am comfy with what I did even though the 75% boot issues and Miracast functionality being effected by WiFi with VPN apps.
I have given options for assistance by ROM builders in copying my ROM for building a unique custom one, but because I am using some apps that may be from a closed off ROM to builders, respect to the owners must be made. So it will be all for personal use at most.
Thanks for the detailed reply. I guess stock with some tweaks here and there isn't that bad afterall
Sent from my SM-G935F using XDA-Developers mobile app
as of late beoffla kernal utility works smoothly with its latest update.
Also I noticed better boot ups, so most of my boot issues are from beoffola utility with the new boot loader.
Plus, I had to manually remove earth, as google's earth app is busted for 218 220 dpi on the new rom. Google pushes that version from play store without installing the busted version. I downloaded he nodpi version and run it, just unable to update it through play store.
Also wifi seems to operate smoother changing from miracast, and vpn apps. again beoffola utility finally has gotten it right, to use on newer boot loaders, and the lastest OEM ROM.
Welcome to The Arko Project
About The Arko Project: I first started this project on the LG G5 when development was still slow for that device. That version as well as a version for the LG G Stylo was never released publicly due to image burn from a botched deodex attempt, and coffee respectively. I had been on the forum's for a while at that point, and seeing the amount of devices being locked down was worrying to me. I wanted to give back to the community in some small way of my own. While learning as much as possible along the way. While also helping others do the same. I haven't had any formal education in programming or android. just what I've managed to pick up, and learn (I still am learning). It has been a long journey (as well as a humbling one), but it is not over yet. Nor do I believe it ever will be for me. There is always more to learn. That said I test run every build to make sure it's stable, and reliable before releasing.
However as with any Modification to your device: Your warranty will voided, and I am not responsible for direct or indirect damage to your device(s), and no warranty of any kind is given, or implied. You flash this rom or any other modifications linked in this thread at YOUR OWN RISK.
please read all installation instructions, and warnings. It also wouldn't hurt to read through the thread if anyone had posted.
I couldn't have dreamed of this being possible without the help of these great members of our community
@SuperR. (For his Amazing work with SuperR's Kitchen) @HPTesla for giving me tips, and information as to getting started) @Chainfire (For SuperSU) @bcrichster (For help with ota's)@cesarandres_8911 (For encouragement, and help with adding rounded corners)
If I by chance forgot anyone please let me know, and I'll add you to the op.
Features
Deodexed* (See notes)
Debloated * (See notes)
dpi (560)
Enabled Adoptable Storage
Enabled All Apps Multiwindow
Jpeg max quality (As well as other tweaks faster/smoother streaming/scrolling etc.) (Needs some testing just for further validation)
Dithering Enabled
No Call Delay
Increased WI-FI scan interval to 300
Enabled 4way homescreen rotation (Launcher must support this feature) (Tested with Nova)
Quick power on
Disabled error reporting
Adaway, Xposed Installer, and SuperSU integrated in Settings (See notes)
Custom boot animation/removed power on sound (See notes)
su.d support
Insecured Kernal
Disabled LGincallbubble
Rounded corners (recents, notifications, and quick settings)
Increased call and media volume steps to 30
Selinux Permissive via su.d script
Removed safe volume warning
Features I would like to add
4-way reboot
remove safe volume warning
volume orientation toggle
Aroma installer with possible systemless root via magisk mod for those wishing to use apps such as Pokemon GO
UI themes
Anything else you guys/gals can think of.
Notes
1*Deodexed: I did not personally deodex this rom, nor do I know if the Stock rom was even odexed. I pulled the system/boot images from my phone running 30d after downgrading from 30e to gain root. (If someone could enlighten me on this matter I would be grateful.) Edit: Rom was deodexed from oem.
2* Debloated Full List
Google Play Books
Google Drive
Gmail
Hangouts
LGFOTA
LG Weather
Maps
Google Play Music
News stand
Google Play Games
Tmo Visual Voicemail
Google Play Movies
Youtube
Tmobile My Account
Amazon
Tmobile TV
Tmobile Caller id
LG Browser/Email/Music
LG My Guide
LG My Wellness
Lookout
3*Integrated apps: Xposed Installer, SuperSU, and Adaway all have their launcher icon removed. I have no idea if an update will break that (Although my guess is probably) SuperSU however remains in the launcher as well as in settings. So if you don't want to see it then you'll have to hide it manually for now. SuperSU should now be hidden also. (Adaway is version 57. I got an error recompiling version 60. You can update manually if you like, but it will probably break the hidden launcher icon.)
4*Custom Boot Animation: Please be forgiving. I have very, very little graphic design experience, but managed to pull something that I think looks halfway decent that was made frame by frame, and took a considerable amount of time. (Also I ran into an issue with the phone only displaying the images after a couple of folders so there are a couple of empty ones.)
That being said this whole project has taken a considerable amount of time. I like most others work 40+ hours a week. I am open to criticism, as long as it is constructive, and done in a polite way.
Install Instructions
1. Flash Multirom TWRP (Normal twrp gives error with updater-script) Can be found here:https://forum.xda-developers.com/lg-g3/development/multirom-v32-resurrected-d855-testers-t3147242 (Make sure you download the correct TWRP for our device D851.)
2. Make TWRP backup (Heavily suggested, but optional)
3.Perform a Full wipe (Dalvik cache, System, Data, Internal Storage,Cache) via TWRP>>wipe>>advanced wipe
4. Flash and reboot
LG incall bubble is disabled 120 seconds after boot via a su.d script.
DOWNLOAD LINKS
https://www.androidfilehost.com/?w=files&flid=191468
SOURCE: Rom stock lg d851 MM 6.0 30d
Kernal: Stock LG MM 6.0 30d (In-secured) via SuperR's Kitchen http://opensource.lge.com/osList/list?m=Mc001&s=Sc002
Reserved#1
New build out! Screenshot updated with DL link in the op. I think I'm gonna use this post for the latest changelogs.
CHANGELOG REV2
Code:
Added Selinux permissive su.d script
Themed added icons to match stock system icon colors
Increased call volume steps to 30
Increased Media Volume steps to 30
Added rounded corners to recents, notifications, and quick settings panel
Removed safe volume warning
CHANGELOG REV3
Code:
Took LG File Manager off debloat list
Removed Permissive su.d script *See op
Fixed Ota updates (No longer uses su.d script to disable service)
CHANGELOG REV4
Code:
Updated Apps:
Cloudprint
calculator
Added Apps:
LG Quick Remote (Couldn't find the latest version so it still needs to be updated from "App Updates" in Settings if you want the latest version available for our phones.)
I'll try to see if I can't just add the update apk in the next update, but it's odexed for some reason. I'll see what I can do though.
Consider this a mini test run for updating Gapps and the like. I tried updating Google Play services and the Playstore, but got force closes. So those will still have to be updated manually I plan on updating more apps in furture updates.
Readded:
Chrome
Permissive su.d script (In preparation for hopeful approval to add Viper for android into the rom.)
Reserved #2
Reserved #3
Thanks, Bro. Nice Job!
Sent from my Resurrection Remix-M N9515 using Tapatalk
Nice. Always up for trying something new. Will give 'er a test run after work.
LG G3 D851, Fulmics v6.9 ROM, MultiROM, Tapatalk 4.9.5
bcrichster said:
Thanks, Bro. Nice Job!
Click to expand...
Click to collapse
Thanks man still got a ways to go, and a lot to learn. The encouragement however means wonders. Thanks I appreciate it.
marcdw said:
Nice. Always up for trying something new. Will give 'er a test run after work.
LG G3 D851, Fulmics v6.9 ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
Awesome thanks for trying it out. Let me know if you have any issues.
I'm probably let the Rom sit for a week, and make sure there isn't anything that needs to be fixed right away. I've xposed installer fc's on boot, but haven't seen one in a while. Either way it still opens, and works fine. I used it to install all my xposed tweaks.
I'll probably start working on a very basic ui theme. Mainly navbar, qs toggles notification shade etc. Then I'll look into the 4 way reboot. I've seen some old sammy threads searching on xda. We'll see if the same principle will work for lg.
Also if anyone would like to help test new builds let me know.
Will also let it sit for awhile and settle in. Preliminary go-through was okay. No issues other than that initial Xposed Installer FC.
Just want to confirm that the Xposed Framework is _not_ installed? Installer said it was not which caused me to get a little confused at first.
Now that I've had a look at what is and is not included I can reflash and setup properly. Essentially the same way as I do Nimax Slim Fit, Tekcafe, and Fulmics.
This is UX4? I forget. Last year I realized the old G3 TweaksBox themes for LP work on MM just fine. I used a few just to liven things up a bit on two ROMs running UX4.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
marcdw said:
Will also let it sit for awhile and settle in. Preliminary go-through was okay. No issues other than that initial Xposed Installer FC.
Just want to confirm that the Xposed Framework is _not_ installed? Installer said it was not which caused me to get a little confused at first.
Now that I've had a look at what is and is not included I can reflash and setup properly. Essentially the same way as I do Nimax Slim Fit, Tekcafe, and Fulmics.
This is UX4? I forget. Last year I realized the old G3 TweaksBox themes for LP work on MM just fine. I used a few just to liven things up a bit on two ROMs running UX4.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
No the framework itself isn't preinstalled. Just the new installer. I'm not sure exactly what you mean by UX4? If you let me know how I can find out. I'll let you know though. Also I never used g3 tweaksbox's theme engine myself, but if it works just let me know. I'm looking at options for managing my future themes, as decompiling, and retheming every one after an update would be tedious. Thanks for the feedback I appreciate it. ?
Sorry about the UX4 questions. Brain is scattered. I forget that some of the stock-based ROMs out there have incorporated the user interface, launcher, and whatnot from elsewhere like the G4 or G5. Also forgetting that Arko is essentially straight stock, debloated. A good thing.
EDIT: The following had all kinds of goodies, mostly G5 compatible stuff with some stock G3 compatible mods. Maybe the dev over there can help out on the theming front.
http://forum.xda-developers.com/showthread.php?t=3292164
[MOD][UI]G5 SystemUI, QSettings background MODs and Softkeys (G3Tweaksbox)
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
I've found this guide:https://forum.xda-developers.com/showthread.php?t=2038675
For a bunch of different samsung mods while searching for info on 4 way reboot. 4wr however is my main focus as having it could save a lot of time rebooting to recovery, and what not. I'm having issues getting a custom zip with a minor colors.xml change to test if that would work vs having to manually edit pngs & 9pngs. It flashes fine but won't boot past the animation.
I probably won't have time to look into it too much this week as I'm going to begin the process of moving, but most of my spare time if not spent working on the rom. Is spent reading about rom related things, and trying to learn as much as I can. Thank guys ?.
Thought I would post an update on the 4 way reboot progress.
I have finally managed to find the right dl links to the latest est smali/baksmali and new commands baksmalied services.jar (formally com.android.policy.jar) and found where to paste the smali resource files. Now as far as I can tell the are rather old. Probably even pre kk not sure. Assuming they work however (Not really expecting it hoping, but not expecting lol). They only issue will be finding the right GlobalAction number for the reboot button. The thread I linked to ealier said something about possibly being able to find it by tracking mreboot (have absolutely no clue.) I'm just gonna try the number listed in the guide,and go from there. If anyone knows how to find it however let me know. Thanks guys. ?
I let my phone go dead last night, and upon recharging my double tap to wake isn't functioning dt2sleep is. As well as google now isn't opening links. It grays slightly, and that's it.
I don't know if they are related, but I'm planning on hopefully releasing a new build with just minor changes. Volume steps mostly. So I may just reflash the boot.img, and see if that helps. If it does I'll make a zip, and post it here in case it happens to anyone.
I know updates have been far, and few inbetween lately. That's because I'm working on some android n dev courses I bought through xda-depot, and having to work a bit of overtime as well.
I haven't given up though just have a lot to do, and too little time to do it in. Lol. Thanks guys.
Edit: I also tried to start it up before charging and it made it to the homescreen with 1% and killed over. So that may also have something to do with it.
Edit 2: I discovered at least one other person was experiencing issues with google now as well, after a few reboots the dt2w starting working just fine. I haven't been able to finish the new build as I'm setting up a new enviroment. Got a desktop pc with a intel core 2 quad cpu 2.4 GHz 2.3GHz
5 gigs of ram, and nvidia quadro fx 570 with 256 mb dvram.
I plan on upgrading this pc quite a bit, but until it exceeds my quadcore laptop. I'll be running linux on my laptop, and windows on the desktop. Now all I need is KVM switch. Once my desktop can handle it I'll probably build with linux on a vm.
In case you're wondering I do all my apk editing/building/coding in windows.
Hey all I was hoping to have a the new build up today, but I haven't been able to make it because after setting up my new desktop the hd went bad so I had to have it replaced. I'm gonna start resetting up tonight when I get off of work. So I'll hopefully have it uploaded by Thursday, or Friday.
Edit: The vm took a little while longer to get set up, but rest assured I'm working on it. I'll get the new build up as soon as I can. Thanks guys.
New build is up guys. Enjoy!
WiFi Calling?
bgon04 said:
WiFi Calling?
Click to expand...
Click to collapse
Hi sorry for the late reply. I didn't get a notification, and my computer has been in the shop. Wi fi calling works just fine as far as I'm aware, but let me know if you run into any issues & let me know if you try it out. Thanks!
The loss of my G3's SD slot has curtailed my ROM flashing. No longer able to have half a dozen ROMs running on the phone but I still had enough internal space to try.
TAP runs fine. Data, Bluetooth, WiFi okay. Went through all the settings. All good.
GApps are ancient but that's okay I guess.
Needs some kind of file manager though. I like to setup Google later during ROM testing so I usually need to install certain tools first. Not possible via the ROM's DocumentsUI. I think the only flashable file manager I have is CM's. It might work.
About to flash ROM again with some extras and give 'er a longer test.
Oh, almost forgot. An OTA update of about 75MB came through. Not gonna take it, of course, but was surprised to see it.
ZTE Axon 7 A2017U, PureNexus ROM, Tapatalk 4.9.5