Microsoft pulled this app from the store but maybe someone have xap for sideloading? AFAIK, there was no retail version of this app.
P.S. I know, by the rules, it's not a good forum to ask that kind of thing. But unfortunately looks like this is the only one "alive" WP forum at all
Here you have: https://1drv.ms/u/s!AmTDQ_t_irRBwJgGAWp17tkr4dBShw
Thank you, sir!
I got problem installing this
Hi! Did you get the app working?
I recently upgraded my Lumia 1020 to 10.0.10586.1007 via the "Enterprise hack".. (Found a licence file)
I wanted to have Lumia Refocus, and found this post. However, I'm not able to deploy the file. (Have both Appdeploy 8.0 and 8.1 installed).
The Windows Application Deployment worked with deploying Root Tools (.xap) from xda-forums. I have used Root Tools to Jailbreak both "Interop + Capability unlock" and "Unlock Win10 Capabilities" ..
However, I can't get it to deploy the Lumia Refocus.xap ... Only returns error 0x81030120
Any idea how to fix?
@henxan, I did nothing special but phone must be interop & caps unlocked (by using Interop Tools). XAP was deployed via standard "Windows Phone Application Deployment 8.1" from SDK.
Offtopic: i still use VPV xap deployer.
@sensboston I updated my Lumia 1020 to 10.0.14393.1066 today, to see if that made any difference - it didn't
About the unlock - you said interop and cap unlock? I used Root tool, which I found here on xda, and chose to check the "Capability unlock" under "Interop + Capability Unlock" as well as checked "Unlock Windows Capabilities" under "Unlock Win10 Capabilities". Shouldn't this do it?
I am obviously able to deploy using "Windows phone application deployment (8.1)" since I used that tool to deploy "Root Tool.xap". Why won't it deploy the Lumia Refocus? Any ideas?
henxan said:
@sensboston
About the unlock - you said interop and cap unlock? I used Root tool, which I found here on xda, and chose to check the "Capability unlock" under "Interop + Capability Unlock" as well as checked "Unlock Windows Capabilities" under "Unlock Win10 Capabilities". Shouldn't this do it?
Click to expand...
Click to collapse
Did you get "SUCCES You are Done !" message?
augustinionut said:
Did you get "SUCCES You are Done !" message?
Click to expand...
Click to collapse
Yep, got that message both when I clicked to "Interop + Cap..." and for "Unlock Win10 ..."
Are there any ways I could verify if it was actually successfull @augustinionut? Btw, I still get the same error that I quoted above 0x81030120 ...
Try to install vcreg.
augustinionut said:
Try to install vcreg.
Click to expand...
Click to collapse
Oooops.. Just discovered I was supposed to choose templates to apply.. Working on it now - trouble getting my pc to recognize my mobile.
---------- Post added at 08:05 PM ---------- Previous post was at 07:17 PM ----------
Hmm.. seems like my pc suddenly is not able to recognize my lumia device. If i use windows phone internals it only says Brand/Model: "Nokia Lumia" Operating model: "Normal (Windows phone)" .. No more info.. strange.. Can this be the reason - it does not recognize the phone - no product code, no operator, no firmware version ... I only once got wininternals to show me more device info. Really scared that my microusb-connection is damaged. .. Anyone met this problem before?
So I've tried installing SDK tools lite 8.0 & 8.1 and other recommended things to my second pc, to see if that helps. Well. The phone is recognized, it is unlocked for development. Everything seem to be correct - still I get the 0x81030120 error. I saw someone mention something about the "Info+Extras" could be related to this error? Anyone who can verify/dismiss this? Should I do a hard reboot and stop the phone from updating "Info+Extras" in the store?
Ok - final update from me .. I reset my phone and chose a restore point with earlier release such that I got Lumia Camera app. Then i hurried to stop automatic updates - notably the "Info + Extras" update. After getting the phone up-to-date, without updating "Info+Extras", I installed the "Root Tools.xap" I found here on xda (Developer mode on phone) using Windows Application Deployment. I jailbroke the phone and NOW "Lumia Refoucus" installed ... Works great..
BTW: I see that microsoft store have an update for "Lumia Refocus" - should I install, or do I risk fudging my Refous-app?
You can't update sideloaded app. Also AFAIK MS pulled app from the store for W10M handsets (it's visible but you can't install it at all).
Yes you can. Reinstall store variant 11606.
[CORRECTION] I was wrong, it's possible with the trick. Check for updates, store should start downloading a new version of "Lumia Refocus". Pause download, go to the apps and uninstall sideloaded app first, than go back to the store and resume download.
I instaled version 1.1.4.7. and i got this error:
augustinionut said:
I instaled version 1.1.4.7. and i got this error:
Click to expand...
Click to collapse
Same for my 950 XL
Is about camera app version. With 2018.309.60.0 is working. But i can't get 60fps video.
For me 60fps works with 2018.426.90.0
Related
This is only confirmed working for the AT&T Lumia 1520 and may work as is for other phones but also might require tweaks to the XML (see below). It is very possible to brick your phone with this. Your mileage may vary!
From a high level this works by using FiddlerCore to intercept the traffic going to the Microsoft WPflights server that controls the Insider app and responds with our own custom data. The app accepts registry editing information from the web responses and acts upon that. This allows us to write stuff to select locations in the registry. In the case of the Windows 10 Preview, it appears to only look for your phone's PhoneManufacturerModelName to decide if it should be offered previews. Windows Update also checks this value. Other devices like Samsungs or HTCs may need different settings. My phone did revert to it's factory values after Windows 10 was installed (I actually think it might have done it after Windows 8.1 was installed but it continued with 10 nonetheless).
1. For the Lumia 1520 (and other phones?) reset your phone using the Windows Phone recovery tool. I recommend not logging in and setting everything up yet and just waiting til the end and doing a reset and letting it restore after you’re on Windows 10. This may not be required for your device but most likely is due to the space issue cited by Microsoft. You can see your available space in the About menu of the Windows Insiders app. Before resetting mine was ~200mb and after it was ~600mb. You can try without resetting but may get an error after it tries to download and install the update.
2. Install the [url=http://go.microsoft.com/fwlink/?LinkId=522524]Windows Insider app on your phone (you will need to have a store account configured)
3. Open the insiders app and go to the about options in the app bar and screenshot/make notes/email the settings to yourself. You may need this later.
4. Download and extract the WPInsidersHacks app (attached to this post) to your computer
5. Start the WPInsiderHacks app on pc, approve any firewall requests
6. Connect to the same WiFi that your PC is on. Edit the settings for the WiFi connection to turn on the Proxy and set it to use the PC’s IP address and enter 8877 for the port
7. Open Internet Explorer on your phone and navigate to http://[pc.ip.add.ress]:8877 where [pc.ip.add.ress] is the IP address of the PC running the WPInsidersHacks app
8. Tap on the link at the bottom to the fiddler root certificate
9. When prompted click open and then install to trust the cert and ok at the confirmation
10. Run the Windows Insider app and tap get preview builds
11. Tap on which custom action you’d like to perform. In my case I hit "Set to ATT Lumia 635" and click the arrow at the bottom
12. Accept the agreement and click the check mark at the bottom. the app will close
13. Now clear your proxy settings and run the insider app again
14. Tap get preview builds and login with your Microsoft account
15. Select the fast branch (if you’re reading this of course you want the fast branch) and click the arrow at the bottom
16. Go into the phone settings and check for updates. With any luck you should have Windows 10 there for you to install. On my AT&T 1520 it had to do 8.1 first but it kept going to 10 after 8.1 installed (had to check for updates again)
17. You’ll probably want to go into the settings and do another reset and then log into the phone and let it restore your previous data
The Windows Insider options are populated from the WPFlights.xml file. Feel free to edit/add stuff. I've experimented with writing to other keys but had mixed results. I wasn't able to write to the Software\Microsoft\Settings\{1DEF9B7D-2322-40eb-A007-16A75D5CDA6F} for example (seemed to not like the curly braces?). It should have all the same permissons as the preview for developers app. You'll just need to run the WPInsiderHacks app on your PC and point your phone's proxy settings to it if you want to go back and set something again (such as enabling tethering).
I just used this to install the TP on my Lumia 930 and .. it worked like a charm! phone is booting, OS is working! Thank you very much for the work you put into this! Really excited to try out the Preview now..
Edit: I did change the target device ID from ATT though.
Confirmed working for the Lumia 930
Confirmed working for the Lumia 920
I will try tomorrow on Lumia 520 and post result.
Not working on my Lumia 535
tried it on a Lumia 535. After Setting no proxy again the Windows Insider app shows that there is no update available.
the about-setting Shows RM-975 correctly instead of RM-1089, but I think the FW Version needs to be changed too.
Does anyone know a fix? Tried it several times by now.
LogString: DefaultCertMaker: GetRootCertificate() did not find the root in t
he Windows TrustStore.?
error0x0000034 said:
tried it on a Lumia 535. After Setting no proxy again the Windows Insider app shows that there is no update available.
the about-setting Shows RM-975 correctly instead of RM-1089, but I think the FW Version needs to be changed too.
Does anyone know a fix? Tried it several times by now.
Click to expand...
Click to collapse
Which carrier are you on? Sometimes you have to use device information for a phone on the same carrier as you're on for it to work.
I tried this with both a 520 and a 920. Everything works fine until I tap Get preview builds. I get the no builds message, but I know it's using the proxy because the WPInsiderHacks window gives this message:
** LogString: !SecureClientPipeDirect failed: System.IO.IOException Authenticati
on failed because the remote party has closed the transport stream. on pipe to (
CN=login.live.com, O=DO_NOT_TRUST, OU=Created by http://www.fiddler2.com)
** LogString: !SecureClientPipeDirect failed: System.IO.IOException Authenticati
on failed because the remote party has closed the transport stream. on pipe to (
CN=sn3301.storage.live.com, O=DO_NOT_TRUST, OU=Created by http://www.fiddler2.co
m)
Click to expand...
Click to collapse
Both devices get exactly the same result.
EDIT: I should clarify something: both the 920 and the 520 get this script. The 920 differs a bit on the device itself. Instead of going directly to the no builds page, an error pops up that says:
Server error
A connection error prevented us from downloading programs for you. Please check the date/time of your device and its network connection and try again.
Click to expand...
Click to collapse
Lumia 920
OK certificate installed
Windows insider no change ?
What would the registry entry for MOID be?
I have a non AT&T carrier, and I want to change that entry to be AT&T
Tried it on my Lumia 530 don't work i get we weren't able to find a preview build for you please confirm
Working fine on my 920 now.
I just installed. Working fine here on my Lumia 720.
For those asking, I've found you absolutely have to modify the WPFlights.xml PhoneManufacturerModelName to one that matches the carrier your device is from. In my case, I have a //Build/ (Rogers Canada) Lumia 920, and a Hong Kong unlocked 620 & 1520.
I managed to spoof the build check by using the following:
Unlocked/Hong Kong: RM-1027_1007
Rogers/Canada: RM-985_1004
http://twitter.com/stroughtonsmith/status/566460948291260417
Also, wiping the devices first /with the Windows Phone Recovery Tool/ (not Reset in Settings->About) for the most part isn't optional; only the 920 for me had enough space to install without doing that
Hope this helps
stroughtonsmith said:
For those asking, I've found you absolutely have to modify the WPFlights.xml PhoneManufacturerModelName to one that matches the carrier your device is from. In my case, I have a //Build/ (Rogers Canada) Lumia 920, and a Hong Kong unlocked 620 & 1520.
I managed to spoof the build check by using the following:
Unlocked/Hong Kong: RM-1027_1007
Rogers/Canada: RM-985_1004
http://twitter.com/stroughtonsmith/status/566460948291260417
Also, wiping the devices first /with the Windows Phone Recovery Tool/ (not Reset in Settings->About) for the most part isn't optional; only the 920 for me had enough space to install without doing that
Hope this helps
Click to expand...
Click to collapse
Hi, would you be able to upload your WPFlights.xml for me to have a look at what you have changed. For me it's not working. Cheers.
ajay003 said:
Hi, would you be able to upload your WPFlights.xml for me to have a look at what you have changed. For me it's not working. Cheers.
Click to expand...
Click to collapse
You just need to change the phonemanufacturermodel to whatever phone that supports windows 10 from your carrier/region.
ajay003 said:
Hi, would you be able to upload your WPFlights.xml for me to have a look at what you have changed. For me it's not working. Cheers.
Click to expand...
Click to collapse
The line in the screenshot is what you'd need to change; nothing too complicated, but finding a valid model for your phone's carrier is the hard part (took me a lot of Googling to find the two I needed), hence why I posted mine
stroughtonsmith said:
The line in the screenshot is what you'd need to change; nothing too complicated, but finding a valid model for your phone's carrier is the hard part (took me a lot of Googling to find the two I needed), hence why I posted mine
Click to expand...
Click to collapse
Not working for me. I'm having Lumia 920 and the carrier rom is RM-821_apac_australia_new_zealand_218. Here's my file attached. Am i doing something wrong?
What exactly did you google ? because the i am with is Telstra in Australia they have a prepaid Nokia Lumia 635 so where would i get the PhoneManufacturerModelName ?
German, Unlocked 830: RM-984_1002
For googling help: some forums automatically include the model variant in signatures of members, I just started with RM-984_10XX for 830 and tried increasing numbers for XX in order to find one that was posted a lot on german forums. Good luck!
ajay003 said:
Not working for me. I'm having Lumia 920 and the carrier rom is RM-821_apac_australia_new_zealand_218. Here's my file attached. Am i doing something wrong?
Click to expand...
Click to collapse
Yeah, you just placed RM-821_apac_australia_new_zealand_218 into the XML - that's your existing device. You need to use the correct form for a 63x/730/830 on same carrier, not your existing 920. That's the hard part to find.
My 1520 was "RM-937_apac_hong_kong_222", which I substituted for "RM-1027_1007" (a Hong Kong Lumia 636) - from what I could tell it doesn't need the "apac_hong_kong" part, but it needs the valid number at the end, and I don't know an easy way to find out what that should be (took me 50 mins of Googling to find that one).
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
th0mas96 said:
German, Unlocked 830: RM-984_1002
For googling help: some forums automatically include the model variant in signatures of members, I just started with RM-984_10XX for 830 and tried increasing numbers for XX in order to find one that was posted a lot on german forums. Good luck!
Click to expand...
Click to collapse
lmfao. I was far too lazy to try bruteforcing it, but again, that's why I posted my working ones!
The new Lumia apps for windows 10 mobile
advancedinfo.appx <- After installing check for updates Official store link
audio.appx <- Official store link
devicehubspiderman.appx <- Official store link
displaysettings.appx
glancescreen.appx <- Official store link
lumiamoments.appx <- Official store link
motiondatasense.appx <- Official store link
networkplus.appx <- Official store link
touchsettings.appx <- Official store link
Update: 24-11-2015 11:06
FieldTest_1.0.11.2_dbec8fd0c70b45818d4c461f412c781f.appx
DockingControllerHost.appx
Instal the apps with WinAppDeployCmd.exe
Put this apps in ur Phone and install it with file explorer and restart phone
WM10 10.0.10586.11
LUMIA 640 XL.
I dont have windows 10. Im triyng right now installing from phone, like camera appxbundle did.
Glange and motion ask for restart....
Gadget installed... aask for restart...
Touch, extras , advanced info fail to update. Will try using fiddler.
Updated
Lumia moments not installing, but i dont use it.
On lumia 1020 change titles in extra section but apps crash on loading.
Have you updated from store?
augustinionut said:
Have you updated from store?
Click to expand...
Click to collapse
Yes
Sorry, i asked 3peris.... if after install has made the update from store.
By the way, where did you dig for this apps?
In store says that updated (but didint download enything).. by the way these apps showing Nokia Corporation not Microsoft..
augustinionut said:
Sorry, i asked 3peris.... if after install has made the update from store.
By the way, where did you dig for this apps?
Click to expand...
Click to collapse
Maybe he used Fiddler to get the URL for downloading the apps, I used Fiddler for getting the Updates on my Lumia 640, and could download the apx copying on Edge the URL's
Installed the sysapps on 640XL 10586.11 from phone memory. Advanced info needed a Fiddler-assisted update.
There is also a Field Test shared although I haven't tried it. https://www.reddit.com/r/windowsphone/comments/3tz2hi/download_lumia_950_oem_apps_and_att_bloatware/
Extras+Info it's not appx.
it is WP8 xap.
and here is latest version with Store Signature
Remove .zip extension.
djamol said:
Extras+Info it's not appx.
it is WP8 xap.
and here is latest version with Store Signature
Remove .zip extension.
Click to expand...
Click to collapse
advancedinfo.appx was also a xap but I got it to appx named. Because WinAppDeployCmd.exe does not recognize him otherwise
Cholens said:
advancedinfo.appx was also a xap but I got it to appx named. Because WinAppDeployCmd.exe does not recognize him otherwise
Click to expand...
Click to collapse
Field Test installed but crashing on starting. Any suggestion?
Lumia 535 DUAL Sim running 10586 build, interop unlocked.
raafuls1 said:
Put this apps in ur Phone and install it with file explorer and restart phone
WM10 10.0.10586.11
Click to expand...
Click to collapse
how to install from file manager
im currently running on 10586
A AJAY said:
how to install from file manager
im currently running on 10586
Click to expand...
Click to collapse
Turn ON developer mode in settings, move files on sdcard run file explorer/sdcard and click/run this apps
What is the product code of the Lumia 950/Lumia 950XL?
I would download and analyse the firmware.
Did anyone successfuly installed this apps on Lumia 640?
EDIT: Ok I have tested this apps on Lumia 640 LTE. Everything is working and now the phone (at least whole Settings) finally has Windows 10 Mobile look! BTW only Continumu doesn't work, which, was expected since this is not a high end phone.
Thanks for this!
glance background beta does not work anymore with the last version of glace screen
djamol said:
Extras+Info it's not appx.
it is WP8 xap.
and here is latest version with Store Signature
Remove .zip extension.
Click to expand...
Click to collapse
I was able to install using Explorer on the phone. After reboot, Extras & info does not start though. Running updates doesn't show any updates for it either. Interestingly, Advanced info installed and works fine. Lumia 640XL running 10586.11
Is there perhaps a newer version of Extras+Info than you what you posted?
edit1: never mind. I eventually figured out that I had to wait in Explorer for a couple minutes before closing it to get E&I installed correctly. It just takes some time in Explorer and there is no indication whether it's done. tap the xap to install, wait at least 2 minutes, the reboot and it works.
thanks
You need to read. Much. Update from store tricking microsoft using fiddler .
---------- Post added at 08:49 PM ---------- Previous post was at 08:45 PM ----------
her3814 said:
Maybe he used Fiddler to get the URL for downloading the apps, I used Fiddler for getting the Updates on my Lumia 640, and could download the apx copying on Edge the URL's
Click to expand...
Click to collapse
Witch is the form of download link ?
Dear,
A few months ago, I've upgraded my Lumia 925 to Windows 10 (preview) using Windows Insider: it went smoothly.
I decided to go back to WP8.1 using the Lumia Recovery Tool.
Today, I tried to update (again) to one of the Windows 10 previews, but I'm unable to upgrade: no updates found.
I know MS decided to exclude Lumia 925 to Windows 10 final: but: is there any possibility to upgrade to one of the developer previews?
When I download Windows Insider, I select fast ring: no updates are found (my account is enabled for developer previews).
Is this normal behaviour? I also tried to edit the registry to get Windows 10 redstone: unable to update: Update is downloading but when I try to install: unable to open update it says.
Any thoughts?
Thanks!
Pieter
No one?
cyberbozzo said:
No one?
Click to expand...
Click to collapse
If I could help dude I would , recently moved from android to windows phone and can say the community bad, ignorance seems to be a major player. I can kinda see why the app developers don't want create any or port any over.
use release preview ring
Same problem here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
cyberbozzo said:
Dear,
A few months ago, I've upgraded my Lumia 925 to Windows 10 (preview) using Windows Insider: it went smoothly.
I decided to go back to WP8.1 using the Lumia Recovery Tool.
Today, I tried to update (again) to one of the Windows 10 previews, but I'm unable to upgrade: no updates found.
I know MS decided to exclude Lumia 925 to Windows 10 final: but: is there any possibility to upgrade to one of the developer previews?
When I download Windows Insider, I select fast ring: no updates are found (my account is enabled for developer previews).
Is this normal behaviour? I also tried to edit the registry to get Windows 10 redstone: unable to update: Update is downloading but when I try to install: unable to open update it says.
Any thoughts?
Thanks!
Pieter
Click to expand...
Click to collapse
Same problem here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I need help too, root tool and vcreg don't install for xap deployer (error menssage) CustomPFD need SD card, so this are hard to solve, I've used wpinternals too to edit the registre file !!!!!!!
Some one in this FORUM PLEASE HELP US !!!!!!!!!!!!!!
r_x4 said:
Same problem here !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I need help too, root tool and vcreg don't install for xap deployer (error menssage) CustomPFD need SD card, so this are hard to solve, I've used wpinternals too to edit the registre file !!!!!!!
Some one in this FORUM PLEASE HELP US !!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hey out there !
Upgrading to W10M works actually !!
Yesterday i upgraded my 925 from 8.1 Denim to W10M 10.0.14393.89
In Short:
All you need is the same 8.1 Firmware (.ffu)-File as is installed on your Phone.
Grab your FW on lumiafirmware Site
You need WP Internals 1.2 to unlock Bootloader and enable the Root access.
-YOU DIDN´T need Root-Tool and vcreg and all the other Stuff, ONLY WP Internals !!
Reboot Phone
After that, you must Boot your Phone via WP Internals into the Storage Mode
On PC open regedit and point to your Phone, called MainOS
In Regedit, you load the Registry of your Phone and do some Hacks and write the registry back to Phone
Reboot your Phone, go to MS Store and download Windows Insider App, start it and register for the Insider programm.
All done, you can use the fast ring, Slow ring and Preview .
If you wish, i can do a complete tutorial here !
Cya
http://forum.xda-developers.com/win...le/installing-windows-10-mobile-tech-t3431454
visit this.
Broken phone
Ok people... Process failed after tried flashing the FFU and guess what? phone doesn't boot anymore, keeps on looping.. when i try the down and power botton and then down again, i get the gear screen but either it gets stuck there or it gives me a bad face.. non of the relative software (WPinternals - Windows Device Recovery) recongize the phone. I guess it's pretty dead, any ideas on what can i do??
aris7la said:
Ok people... Process failed after tried flashing the FFU and guess what? phone doesn't boot anymore, keeps on looping.. when i try the down and power botton and then down again, i get the gear screen but either it gets stuck there or it gives me a bad face.. non of the relative software (WPinternals - Windows Device Recovery) recongize the phone. I guess it's pretty dead, any ideas on what can i do??
Click to expand...
Click to collapse
With the phone turned off, press and hold "volume up" + "power". Keep pressing them until you see a lighting with a gear. From there, flash using "Windows Phone Image Designer".
I had some recent problems with the battery on the latest cumulative of windows 10 mobile. So I wanted to restart fresh and I downgrad it to windows phone 8.1 . I forgot that now i can't update the phone to windows 10 mobile with windows insider app any more. Can someone give me a tutorial to how to get to windows 10 now ? My phone has an sd card , I read that you can if you have an sd card. Please help..
EmanuelManole said:
I had some recent problems with the battery on the latest cumulative of windows 10 mobile. So I wanted to restart fresh and I downgrad it to windows phone 8.1 . I forgot that now i can't update the phone to windows 10 mobile with windows insider app any more. Can someone give me a tutorial to how to get to windows 10 now ? My phone has an sd card , I read that you can if you have an sd card. Please help..
Click to expand...
Click to collapse
Hi, were you able to upgrade to Windows 10 Mobile. If not let me know, i will provide the complete walkthrough with all supporting files needed.
shahidkazi said:
Hi, were you able to upgrade to Windows 10 Mobile. If not let me know, i will provide the complete walkthrough with all supporting files needed.
Click to expand...
Click to collapse
I have to figure it out, thank you!
EmanuelManole said:
I have to figure it out, thank you!
Click to expand...
Click to collapse
Sorry a little confused .. did not understand what you meant. I can post the steps if you want. I just upgraded mine today to 14393.321 from WP 8.1
shahidkazi said:
Sorry a little confused .. did not understand what you meant. I can post the steps if you want. I just upgraded mine today to 14393.321 from WP 8.1
Click to expand...
Click to collapse
Sorry for my bad english , i had figure it out * . Whit what registry values did you changed?
EmanuelManole said:
Sorry for my bad english , i had figure it out * . Whit what registry values did you changed?
Click to expand...
Click to collapse
No worries.. I used the following
PhoneManufacturerModelName = RM-1089_1087
Phone Operator Name = 000-DE
Phone Model Name = Lumia 735
I found this model to be closest to 1320 in terms of internal hardware specs and the build is far more stable.
Thanks
shahidkazi said:
No worries.. I used the following
PhoneManufacturerModelName = RM-1089_1087
Phone Operator Name = 000-DE
Phone Model Name = Lumia 735
I found this model to be closest to 1320 in terms of internal hardware specs and the build is far more stable.
Click to expand...
Click to collapse
Thank you, it worked perfectly!!
Hi, can you please write how did you get WP 10 from 8.1? I have L 1320 and I have tried everything, but nothing is working. I have stucked with CustnomWPSystem, because no MixRadio app after hard reset of flash 8.1 ROM, replaceing Extras + info app with vcREG or customPDF was unsuccessful, replaceing Preview for Developers app was successful, but replaced apps doesnt work....
Can you please write down how you did it?
Inarus said:
Hi, can you please write how did you get WP 10 from 8.1? I have L 1320 and I have tried everything, but nothing is working. I have stucked with CustnomWPSystem, because no MixRadio app after hard reset of flash 8.1 ROM, replaceing Extras + info app with vcREG or customPDF was unsuccessful, replaceing Preview for Developers app was successful, but replaced apps doesnt work....
Can you please write down how you did it?
Click to expand...
Click to collapse
I update often with insider windows to build (not Redstone) and then I unlock.
I then apply these settings to get the Redstone build.
You can try this >>http://forum.xda-developers.com/win...-interop-unlock-root-wp8-8-1-windows-t3450239
Or to manually unlock creating your own rom >>http://forum.xda-developers.com/windows-phone-8/development/windows-phone-internals-unlock-t3257483
Sorry I have no time to upload my custom rom
Sorry my bad english.
Inarus said:
Hi, can you please write how did you get WP 10 from 8.1? I have L 1320 and I have tried everything, but nothing is working. I have stucked with CustnomWPSystem, because no MixRadio app after hard reset of flash 8.1 ROM, replaceing Extras + info app with vcREG or customPDF was unsuccessful, replaceing Preview for Developers app was successful, but replaced apps doesnt work....
Can you please write down how you did it?
Click to expand...
Click to collapse
I did the following:
1. Restored to 8.1 with WDRT (Windows Device Recovery Tool)
2. Disable automatic app updates from Store (to prevent extras+info from updating)
3. Unlocked bootloader using WPInternals
4. Unlocked phone using Developer Phone Registration
5. Deployed custom pfd xap
6. copied mixradio vcgreg bootstrap to sd card root folder (mixradio is available if you recover using WDRT), or else you can stick to extras+info bootstrap
7. Executed CustomPFD to deploy vcreg via the mixradio bootstrap
8. Once vcreg was installed, go to settings do Interop Unlock
9. Change the registry settings to have the phone as Lumia 735 (check my post above)
10. Install Windows Upgrade Advisor and execute it
11. It will detect the phone as 735 and schedule updates
12. Go to updates and install update (The first update will take you to windows 10 build 10586 (TH1).
13. Check for updates again (you will get an update for the Anniversary Update)
Recommended to install the Anniversary Update. It has been by far the most stable version for 1320 (for me atleast).
Let me know if you have any other issues.
Thank you very much, but I have not been succesful.
llucas_br: I tried it many times but it does not work for me. I am stuck at 9) because i am unable to replace the app. It seems to be installed not on SD card. I tried Insider preview instead and no luck.
shahidkazi: Well, I stucked on 5). Do you really mean custom pfd or it shoudl be customWP? If custopWP I have the same problem as mentioned...
And after WDRT I do not have Mixradio app :/ (iam using this firmware: RM994_3058.50000.1424.0003_RETAIL_eu_hungary_1156_03_445314_prd_signed.ffu)
I am guessing the file image for the model from hungary does not have mixradio. You may want to look for the extras + info bootstrap. maybe @emanuelMode can post the xap here for you to try bootstrapping with it instead
Adn yes you were right, i meant custom wp system (which is used to apply the bootstrap)
custom pfd is a registry editor which i generally use to edit registry after doing the interop unlock via vcreg. It makes it easier to edit the registry values.
Were you able to unlock boot loader using WP internals?
Try deploy this xap
Inarus said:
Thank you very much, but I have not been succesful.
llucas_br: I tried it many times but it does not work for me. I am stuck at 9) because i am unable to replace the app. It seems to be installed not on SD card. I tried Insider preview instead and no luck.
shahidkazi: Well, I stucked on 5). Do you really mean custom pfd or it shoudl be customWP? If custopWP I have the same problem as mentioned...
And after WDRT I do not have Mixradio app :/ (iam using this firmware: RM994_3058.50000.1424.0003_RETAIL_eu_hungary_1156_03_445314_prd_signed.ffu)
Click to expand...
Click to collapse
Extract, and deploy.
Good luck
Hi,
shahidkazi: that did not work....
llucas_br: I was unable to deploy because lack of interpol unlock...
So I downloaded Indian firmware with Mixradio (RM994_3058.50000.1424.0_RETAIL_im_india_906_03_482446_prd_signed), flashed and it all work Now I am updating 8.1 to be able to update to 10
Thank you very much
Inarus said:
Hi,
shahidkazi: that did not work....
llucas_br: I was unable to deploy because lack of interpol unlock...
So I downloaded Indian firmware with Mixradio (RM994_3058.50000.1424.0_RETAIL_im_india_906_03_482446_prd_signed), flashed and it all work Now I am updating 8.1 to be able to update to 10
Thank you very much
Click to expand...
Click to collapse
Great. Enjoy
Additional Tip:
After upgrading to Windows 10, the phone will still remain as Lumia 735 or any other model that you spoof it to with the registry hack. Keep it the same to get future updates.
In case you have to reset your phone for some reason, it will go back to being Lumia 1320, in that case, simple deploy VCReg 1.5 for Windows 10 using app deploy, interop unlock and change it back to Lumia 735.
I may be wrong or just superstitious but keeping it as Lumia 735 and not 1320, the freezing issue is less frequent.
shahidkazi said:
I did the following:
1. Restored to 8.1 with WDRT (Windows Device Recovery Tool)
2. Disable automatic app updates from Store (to prevent extras+info from updating)
3. Unlocked bootloader using WPInternals
4. Unlocked phone using Developer Phone Registration
5. Deployed custom pfd xap
6. copied mixradio vcgreg bootstrap to sd card root folder (mixradio is available if you recover using WDRT), or else you can stick to extras+info bootstrap
7. Executed CustomPFD to deploy vcreg via the mixradio bootstrap
8. Once vcreg was installed, go to settings do Interop Unlock
9. Change the registry settings to have the phone as Lumia 735 (check my post above)
10. Install Windows Upgrade Advisor and execute it
11. It will detect the phone as 735 and schedule updates
12. Go to updates and install update (The first update will take you to windows 10 build 10586 (TH1).
13. Check for updates again (you will get an update for the Anniversary Update)
Recommended to install the Anniversary Update. It has been by far the most stable version for 1320 (for me atleast).
Let me know if you have any other issues.
Click to expand...
Click to collapse
please take a video
please
Arshen said:
please take a video
please
Click to expand...
Click to collapse
Video would be a little difficult with a lot of kids at home (they wouldnt let me even breathe in peace ), but i will try and get you a guide with screenshots and relevant files, so you can use it to get to Windows 10 Mobile
shahidkazi said:
Video would be a little difficult with a lot of kids at home (they wouldnt let me even breathe in peace ), but i will try and get you a guide with screenshots and relevant files, so you can use it to get to Windows 10 Mobile
Click to expand...
Click to collapse
i change regedit to 735
install windows upgrade
windows upgrade messaged "Ready to upgrade, Go to Phone update..."
but when go to Phone update in setting, and check for update messaged "your phone is up to date"!!!!
next install insider and get build, but messaged "A connection eeror orevented us from downloading program for you. Please check the date/time of your device and it's network connection and try again."
why? (
help me
Arshen said:
i change regedit to 735
install windows upgrade
windows upgrade messaged "Ready to upgrade, Go to Phone update..."
but when go to Phone update in setting, and check for update messaged "your phone is up to date"!!!!
next install insider and get build, but messaged "A connection eeror orevented us from downloading program for you. Please check the date/time of your device and it's network connection and try again."
why? (
help me
Click to expand...
Click to collapse
It could be some registry setting wrong or you may have Extras + Info installed.
I have created a complete step by step walkthrough with screenshots, you can check what you may have missed.
Link - http://shahidkazi.blogspot.in/2016/11/upgrade-lumia-1320-to-windows-10-mobile.html
TH2 Lumia 1320
shahidkazi said:
Great. Enjoy
Additional Tip:
After upgrading to Windows 10, the phone will still remain as Lumia 735 or any other model that you spoof it to with the registry hack. Keep it the same to get future updates.
In case you have to reset your phone for some reason, it will go back to being Lumia 1320, in that case, simple deploy VCReg 1.5 for Windows 10 using app deploy, interop unlock and change it back to Lumia 735.
I may be wrong or just superstitious but keeping it as Lumia 735 and not 1320, the freezing issue is less frequent.
Click to expand...
Click to collapse
If I get W10 TH2 on my Lumia 1320, and reset the phone, did it automatically changes the register to show it is a 1320 again? And only receive the last TH2 to the Lumia 1320? Sorry 4 my english Thank you
It's very sad and unfair that after the extended support ending in Jan 2023, surface RT users are not even allowed to download or install app from windows store anymore, such enormous company as Microsoft is just too rich and huge to not be evil, so i had to start to look for ways to get offline installers and manually install them. I can sucessfully install them and it shows on the windows store as installed. But the app could not run properly, i get a message saying the app needs to be repaird and it just stuck on repairing in the windows store. but i don't know whether it's because the issue of my system, as it's not the original system and I could not sync my license of the windows store in the app undates. As this is usually the reason that the app could not be updated in windows store. So maybe it could work on the original system? Somebody have a try?
You need to open your actual Microsoft Store.
Find the app that you want, get the link of the app.
go to this site:
https://store.rg-adguard.net
put the link in the box and click the tick
Look for and download the ARM or Neutral version of the app that you want, and it must be .appx or .appxbundle filetype.
You will also need to download other appx of the ARM or neutral as well. From the name you would possibly know they are the dependancies to run the actual app, so you will need to manually install them before install the actual app
I will use installing unpacker app for example. Run the powershell as administrater.
Install the dependencies first
just type in
Add-AppxPackage -Path "C:\Users\user1\Desktop\Microsoft.VCLibs.110.00_11.0.51106.1_arm__8wekyb3d8bbwe.Appx"
after this one is done, do the same for the next one
Microsoft.WinJS.1.0_1.0.9200.20789_neutral__8wekyb3d8bbwe.Appx
Add-AppxPackage -Path "C:\Users\user1\Desktop\Microsoft.VCLibs.110.00_11.0.51106.1_arm__8wekyb3d8bbwe.Appx"
After you get everything ready,
just type in
Add-AppxPackage -Path "C:\Users\user1\Desktop\unpacker.appx"
can get more details here: https://learn.microsoft.com/en-us/powershell/module/appx/add-appxpackage?view=windowsserver2022-ps
and voila
if you get error when installing, just read the details and it's possibly you haven't installed the dependencies, which means you will need to use the same code above to install the dependencies first.
-------------------------------------------------------
update:
Thanks to @dj_tech1 , I am pretty much sure that the evil Microsoft must have messed up the license after ceasing the support.
to be able to run the app, we will have to bypass the app license.
I have entered the test mode and also disble the DEP
BCDEdit /set - Windows drivers
The BCDEdit /set command sets a boot entry option value in the Windows boot configuration data store (BCD) for Windows.
learn.microsoft.com
To be able to do this, the secureboot has to be disabled beforehand
I have also acquired the developer liscense thanks to the help of
@jonnyprogamer at #19
I am not sure whether all the steps above will need to be achieved or not.
Now, we need to remove the signature file of the appx.
First, extract the appx/appxbundle to a working directory, then delete "AppxSignature.p7x".
open a new Powershell window to the working directory, then run the following command:
(I still use unpacker for example)
Add-AppxPackage -Register .\AppxManifest.xml
-Register must point to the path of the AppxManifest.xml
Have a read here: https://titleos.dev/bypassing-microsoft-store-licensing/
And voila!!!!
UPDATE:
with deleting the "AppxSignature.p7x". method, the app stop running after some time. I reinstall it and it can still run for some time.
Anyway, Thanks to @jonnyprogamer @camborita
Go with the method at #29 to test sign the appx and it will not have the issue that I had.
The solution is...Linux.
tomgeniewang said:
It's very sad and unfair that after the extended support ending in Jan 2023, surface RT users are not even allowed to download or install app from windows store anymore, such enormous company as Microsoft is just too rich and huge to not be evil, so i had to start to look for ways to get offline installers and manually install them. I can sucessfully install them and it shows on the windows store as installed. But the app could not run properly, i get a message saying the app needs to be repaird and it just stuck on repairing in the windows store. but i don't know whether it's because the issue of my system, as it's not the original system and I could not sync my license of the windows store in the app undates. As this is usually the reason that the app could not be updated in windows store. So maybe it could work on the original system? Somebody have a try?
You need to open your actual Microsoft Store.
Find the app that you want, get the link of the app.
go to this site:
https://store.rg-adguard.net
put the link in the box and click the tick
Look for and download the ARM or Neutral version of the app that you want, and it must be appx or appxbundle filetype.
You will also need to download other appx of the ARM or neutral as well. From the name you would possibly know they are the dependancies to run the actual app, so you will need to manually install them before install the actual app
After you get everything ready, run the powershell as administrater. I will use installing unpacker app for example
just type in
Add-AppxPackage -Path "C:\Users\user1\Desktop\unpacker.appx"
can get more details here: https://learn.microsoft.com/en-us/powershell/module/appx/add-appxpackage?view=windowsserver2022-ps
and voila
if you get error when installing, just read the details and it's possibly you haven't installed the dependencies, which means you will need to use the same code above to install the dependencies first.
Click to expand...
Click to collapse
This is not the solution. After setup the app says that it cannot run because of the error and it has to be repaired. Only few apps have ability to display repair button. After clicking it nothing is getting repair. Also you cannot Update licenses in your Store account settings.
Setup without -Path command causes no "error badge" on apps list.
It worked before January 10'th. Now as above.
Still waiting for working solution...
dj_tech1 said:
This is not the solution. After setup the app says that it cannot run because of the error and it has to be repaired. Only few apps have ability to display repair button. After clicking it nothing is getting repair. Also you cannot Update licenses in your Store account settings.
Setup without -Path command causes no "error badge" on apps list.
It worked before January 10'th. Now as above.
Still waiting for working solution...
Click to expand...
Click to collapse
Thank you so much for the reply. Do you mean you are with the stock system and upgrade to the latest with Windows update but you still cannot sync your ms store license?
dj_tech1 said:
This is not the solution. After setup the app says that it cannot run because of the error and it has to be repaired. Only few apps have ability to display repair button. After clicking it nothing is getting repair. Also you cannot Update licenses in your Store account settings.
Setup without -Path command causes no "error badge" on apps list.
It worked before January 10'th. Now as above.
Still waiting for working solution...
Click to expand...
Click to collapse
tomgeniewang said:
enormous company as Microsoft is just too rich and huge to not be evil
Click to expand...
Click to collapse
I'm talking about forced updating.
ethical_haquer said:
I'm talking about forced updating.
Click to expand...
Click to collapse
The appx file is directly from the MS store, so I guess the problem is not really with the file, it might be more possible to do with the app license. if some surface RT still got the synced licences, i guess this might work for them?
tomgeniewang said:
Thank you so much for the reply. Do you mean you are with the stock system and upgrade to the latest with Windows update but you still cannot sync your ms store license?
Click to expand...
Click to collapse
Yes. There is an error after clicking sync button.
Surface has reinstalled windows after 10.01.23. After that all updates where installed, including Update 3. There were no differences on apps problems before and after the updates.
dj_tech1 said:
Yes. There is an error after clicking sync button.
Surface has reinstalled windows after 10.01.23. After that all updates where installed, including Update 3. There were no differences on apps problems before and after the updates.
Click to expand...
Click to collapse
So do you mean you didn't get the updates from Windows update, but just get those updated via offline installers?
tomgeniewang said:
So do you mean you didn't get the updates from Windows update, but just get those updated via offline installers?
Click to expand...
Click to collapse
No, Windows Updates came from Windows Update. Windows Store updates only MS default apps, preinstalled with system.
First updates to 2016 rollup has to be installed manually.
dj_tech1 said:
No, Windows Updates came from Windows Update. Windows Store updates only MS default apps, preinstalled with system.
First updates to 2016 rollup has to be installed manually.
Click to expand...
Click to collapse
OK, I see. Thank you very much. I will try to delete those preinstalled apps and install them again manually to see if these ones works.
Sorry, just another question. Before you reinstalled the windows, were you able to sync that app license thing?
tomgeniewang said:
OK, I see. Thank you very much. I will try to delete those preinstalled apps and install them again manually to see if these ones works.
Sorry, just another question. Before you reinstalled the windows, were you able to sync that app license thing?
Click to expand...
Click to collapse
Nope.
dj_tech1 said:
Nope.
Click to expand...
Click to collapse
So, could you install apps from the windows store before January even the app license could not be synced?
tomgeniewang said:
So, could you install apps from the windows store before January even the app license could not be synced?
Click to expand...
Click to collapse
Before January i was able to install apps and they licenses were syncing. All went down after 10.01.
So i'm here to find out is there any walk around.
dj_tech1 said:
Before January i was able to install apps and they licenses were syncing. All went down after 10.01.
So i'm here to find out is there any walk around.
Click to expand...
Click to collapse
Oh, I see. Thank you very much. So it seems like it's the license issue, which needs to be worked around.
I think you can still get a developer license using powershell, maybe that will work
jonnyprogamer said:
I think you can still get a developer license using powershell, maybe that will work
Click to expand...
Click to collapse
Some manual to make test?
I came back home now, i will try on x64 Windows 8.1 and send you the instructions
dj_tech1 said:
Some manual to make test?
Click to expand...
Click to collapse
Btw if dev mode doesnt work it shouls be also possible to make a domain and enable a group policy to sideload apps
dj_tech1 said:
Some manual to make test?
Click to expand...
Click to collapse
Ok i tested it on my Windows 8.1 x64 installation and they still gave me a free developer license, and in fact i was able to sideload AccuWeather for Windows 8, and it doesn't show the "X" symbol (error) in the start screen anymore!
The app still won't launch, but i think it's because of missing dependencies.
Here is how to get a developer license:
1) Run PowerShell as Administrator
2) Type Show-WindowsDeveloperLicenseRegistration
3) Sign in with your MS account when asked, and it will give you the license immediately for free
So in theory i successfully installed an Appx (because i don't get the X showing up on the start screen), im gonna try to get the dependencies now, i attached a screenshot.
PS: I got the instructions from here: https://www.howtogeek.com/129535/how-to-sideload-modern-apps-on-windows-8/
I think we need to do some other stuff in order to successfully run the apps, probably the answer is in this document from MS:
Sideload Apps with DISM
learn.microsoft.com
or this from Technet (archived)
Sideload Windows Store Apps - Windows 8, Try, Test, Help | TechNet
Learn how to quickly and easily build your own Windows Store app to test sideloading apps in Windows 8.
web.archive.org