Paranaoid Android 7.2.1 changes MAC address on OnePlus One. Why? - Paranoid Android Q&A

The MAC address of my OPO changed after flashing PA 7.2.1
See the screenshots.
On Resurection Remix (white menu) is the correct MAC.
Why would that be implemented?
Also, why is PA not showing security patch level?

Related

[ROM] [LP 5.1.1] [UB] Tesla Unofficial

Here is infamous Tesla rom LP 5.1.1 built from source just a few hours ago. Latest features
My features:
1. Hardened kernel, overclocked, voltage, kcal, sound
2. Removed garbage IPs throughout sources
3. Removed NSA from kernel and replaced it with Tomoyo
4. Low camcoder sound fixed
5. Thermal manager values tweaked to prevent screen flickering and overheating
6. Data encryption set to 256 bit 7000 iteration
7. WIFI background scanning disabled for privacy and battery sake
8. Volte (Voice over LTE) enabled
9. Network selection handled by System, as opposed to Simcard/Modem to prevent carrier default
10. GPS supl change to Sony server
11. TWRP 2.8.0 incorporated in boot image
Maybe more...
Instructions:
1. Unlocked bootloader, TWRP
2. Enter recovery and wipe the following: System/Data/Cache/Internal SD
3. Factory reset: important since TWRP is known for not reliable formatting
5. Flash the rom and reboot
6. Enjoy and hit thank you, donate or both
Credit: Tesla Team, CM, Slimroms, AOKP
XDA:DevDB Information
Tesla LP5.1.1 Unofficial, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CM
Version Information
Status: Testing
Created 2015-06-22
Last Updated 2015-06-22
Screenshots
Screenshots added with a black theme...
Use this rom since 2 days, (sorry, got it from your androidfilehost account).
Beside the bugs it works rly great! First LP Rom i want to use as daily
Bugs i found:
- theres no powermenu, the phone goes imidiatly off. (fixed it with apm+)
- no CM-Themer (pls put in )
- your recovery doesn't work, only get a destroyd picture and phone freeze (fixed it with fota twrp)
Aaskereija said:
Use this rom since 2 days, (sorry, got it from your androidfilehost account).
Beside the bugs it works rly great! First LP Rom i want to use as daily
Bugs i found:
- theres no powermenu, the phone goes imidiatly off. (fixed it with apm+)
- no CM-Themer (pls put in )
- your recovery doesn't work, only get a destroyd picture and phone freeze (fixed it with fota twrp)
Click to expand...
Click to collapse
You are confusing this rom, which is an unofficial build with the official one posted a few days ago. My build was posted just an hour ago. None of those bugs are present in my build: There is CM themer, there is power menu including advanced boot and there is a working TWRP in boot image.
Sorry, it is from another team. My fault
See post #2 for screen shots...
optimumpro said:
Here is infamous Tesla rom LP 5.1.1 built from source just a few hours ago. Latest features
My features:
1. Hardened kernel, overclocked, voltage, kcal, sound
2. Removed garbage IPs throughout sources
3. Removed NSA from kernel and replaced it with Tomoyo
4. Low camcoder sound fixed
5. Thermal manager values tweaked to prevent screen flickering and overheating
6. Data encryption set to 256 bit 7000 iteration
7. WIFI background scanning disabled for privacy and battery sake
8. Volte (Voice over LTE) enabled
9. Network selection handled by System, as opposed to Simcard/Modem to prevent carrier default
10. GPS supl change to Sony server
11. TWRP 2.8.0 incorporated in boot image
Maybe more...
Instructions:
1. Unlocked bootloader, TWRP
2. Enter recovery and wipe the following: System/Data/Cache/Internal SD
3. Factory reset: important since TWRP is known for not reliable formatting
5. Flash the rom and reboot
6. Enjoy and hit thank you, donate or both
Credit: Tesla Team, CM, Slimroms, AOKP
XDA:DevDB Information
Tesla LP5.1.1 Unofficial, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: CM
Version Information
Status: Testing
Created 2015-06-22
Last Updated 2015-06-22
Click to expand...
Click to collapse
Replacing resurrection remixed? What's the difference between 2? If this is superset of RR I'll switch over
wis3m0nkey said:
Replacing resurrection remixed? What's the difference between 2? If this is superset of RR I'll switch over
Click to expand...
Click to collapse
Not replacing anything. RR is well supported. Tesla is a different rom. It has support for Slimrom's layers as well as many other features. I like it more than RR, but for you the only way to find out is to try it...
optimumpro said:
Not replacing anything. RR is well supported. Tesla is a different rom. It has support for Slimrom's layers as well as many other features. I like it more than RR, but for you the only way to find out is to try it...
Click to expand...
Click to collapse
OK so I'll go to Tesla and use encryption similar to RR.
Is that correct?
wis3m0nkey said:
OK so I'll go to Tesla and use encryption similar to RR.
Is that correct?
Click to expand...
Click to collapse
Yes. All hardened features are there...
@optimumpro
Using this rom for 3-4 days no force closes no memory leak issues just damn perfect thank you... ?
TeslaOS is ROM by a well known banned member.
Any work or derived works are not welcome on XDA.
-karandpr
XDA Staff

UPDATED March 3 [ROM][LP5.1.1 r34 TESLA_REDUX_RESURRECTED_UNOFFICIAL

Directions to setup wifi/data without captiveportal and with Afwall:
http://forum.xda-developers.com/showpost.php?p=62560397&postcount=3
March 3. New release.
1. LP 5.1.1 r.34
2. Up to day google/cm changes
3. Improved WIFI handling to cellular
4. M5 kernel with fixed sound
Download: http://forum.xda-developers.com/devdb/project/dl/?id=17183
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
February 15. Updated kernel to fix headphone sound.
Download: forum.xda-developers.com/attachment.php?attachmentid=3647315&d=1455549561
Unzip and flash in fastboot
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
]anuary 24: Rom updated to release 33
Warning: All my roms now include a custom script that executes on boot, not at init.d level, which comes much later, but at init.rc. This script disables internet access to prevent data leaking from android system during boot before init.d or your firewalls come in. After the phone is booted and Afwall starts, it resets iptable rules and you then have the internet. Afwall is a must if you care about your privacy and battery life. If you, however, are not going to use Afwall, then delete the following file: /system/etc/crashdod.sh and reboot.
1. Release 33
2. January security patches
3. Wakelock blocker added
4. Updated M5 kernel to include latest CM/Sony changes
Kernel Source: https://github.com/AOSP-Argon/android_kernel_sony_msm8974
Download: http://forum.xda-developers.com/devdb/project/dl/?id=16401
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 25. Updated M5 Kernel built with the latest Ubertc 5.2.1 Nov 21 edition. Also, Sony bootlogo image themed in a teal color, the Tesla way.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=15345
Unzip and flash. Or you can flash the image with Kernel Adiutor.
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 22: New build. This is release 29 with Anti-Piracy features removed. Probably the final build. Enjoy.
Download: http://forum.xda-developers.com/devdb/project/dl/?id=15314
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
November 1. New kernel. [/COLOR]
1. Enabled hardware based encryption mixed with software (you need to re-encrypt to have the feature),
2. Enabled hardware random number generation also mixed with software
3. Your WIFI will work regardless of whether you have old wifi binaries or new
4. I have not incorporated some CM/M5 commits, as they cause random reboots.
5. Some security improvements in init files: now adb won't really work if usb debugging is set to off. Before that even if debugging was off, kernel would still get adb root rights during boot, which is insecure
Dowonload: forum.xda-developers.com/attachment.php?attachmentid=3527276&stc=1&d=1446392027
Sources for kernel: https://github.com/HonamiZ1/android_kernel_sony_msm8974
Instructions:
1. This boot.img does not have TWRP, so use Fota recovery image from my thread here http://forum.xda-developers.com/xperia-z1/orig-development/twrp-2-8-7-fota-partition-brightness-t3237229
2. Unzip boot.img and flash in fastboot: fastboot flash boot boot.img
3. To install TWRP 2.8.7 in Fota or Recovery (depending on whether you have upgraded your bootloader or not) do this also in fastboot: fastboot flash recovery recovery.img
4. Reboot. Now, you will have TWRP independent from kernel
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
This is Tesla-Redux resurrected by me. As you know, the latest official build does not recognize simcard, virtually turning your phone in a wifi device. Moreover, rhine devices are no longer officially supported and the honami thread itself is closed. Well, I fixed the simcard issue and built the rom from the latest sources.
Features include: SlimPie, RRO Layers, Customizable QS Tiles, SlimRecents, Slim's Power Menu, Slim's Nav bar, Hardware keys configuration, Animation Control, App Circle Sidebar, Lockscreen Weather, Screenrecorder settings, Kernel Aduitor built in plus more. My usual hardened features include hardened kernel (modified M5) plus removed nefarious IPs pooped by Google all over the source; full network choice in Cell menu; background wifi scanning is disabled for privacy and battery sake; cell network is handled by Android, as opposed to the modem; Volte provisioned; TWRP 2.8.7 in boot image, and much more...
This rom does NOT include the latest CM power scheme change, which causes random reboots and other issues. It is neither in this rom nor in my DU or Jaguar rom. The original power scheme was fine, no bugs, nothing to fix. So, why fix it, especially, that CM and Sony folks are incorporating 5-10 year old changes just now. I am not blaming Sony kernel developers, as they are not given the latest Sony blobs that are used in stock. So, as a result, they are working like kittens in the dark trying to bridge kernel with android and hardware. The same applies to the latest kernel commits including wifi. Prima driver worked fine in my latest Jaguar/DU builds, there were no WIFI issues. Moreover, the latest M5 changes cause multiple errors during build, so, kernel in this rom is stable as of October 8 or 9. This is the best you can get, as I doubt anyone will be paying any attention to lollipop any longer. .
Usual XDA warning: if your device dies or kills everybody in the vicinity, blame Putin, but I don't recommend it, since Russians mean business nowadays.
Instructions:
1. Unlocked bootloader, root and TWRP recovery
2. Wipe everything including internal SD card
3. Flash the rom, reboot and enjoy
Credit: Tesla Team, Slimroms and CM
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14909
Kernel Sources: https://github.com/AOSP-Jaguar/android_kernel_sony_msm8974
XDA:DevDB Information
TESLA-REDUX-RESURRECTED, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/tesla-redux
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slimroms,CM
Version Information
Status: Stable
Stable Release Date: 2015-10-26
Created 2015-10-26
Last Updated 2016-03-03
Reserved
Mine
optimumpro said:
This is Tesla-Redux resurrected by me. As you know, the latest official build does not recognize simcard, virtually turning your phone in a wifi device. Moreover, rhine devices are no longer officially supported and the honami thread itself is closed. Well, I fixed the simcard issue and built the rom from the latest sources.
Features include: SlimPie, RRO Layers, Custimizable QS Tiles, SlimRecents, Slim's Power Menu, Slim's Nav bar, Hardware keys configuration, Animation Control, App Circle Sidebar, Lockscreen Weather, Screenrecorder settings, Kernel Aduitor built in plus more. My usual hardened features include hardened kernel (modified M5) plus removing nefarious IPs pooped by Google all over the source; full network choice in Cell menu; background wifi scanning is disabled for privacy and battery sake; cell network is handled by Android, as opposed to the modem; Volte provisioned; TWRP 2.8.7 in boot image, and much more...
Usual XDA warning: if your device dies or kills everybody in the vicinity, blame Putin, but I don't recommend it, since Russians mean business nowadays.
Instructions:
1. Unlocked bootloader, root and TWRP recovery
2. Wipe everything including internal SD card
3. Flash the rom, reboot and enjoy
Credit: Tesla Team, Slimroms and CM
Download: http://forum.xda-developers.com/devdb/project/dl/?id=14909
Kernel Sources: https://github.com/AOSP-Jaguar/android_kernel_sony_msm8974
XDA:DevDB Information
TESLA-REDUX-RESURRECTED, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/tesla-redux
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slimroms,CM
Version Information
Status: Stable
Stable Release Date: 2015-10-26
Created 2015-10-26
Last Updated 2015-10-26
Click to expand...
Click to collapse
Ready 2 test but will it work on C6902? Its Modem?
happy3777 said:
Ready 2 test but will it work on C6902? Its Modem?
Click to expand...
Click to collapse
Just flash C6902 modem on top: it is not a big deal...
You sir are a legend... Can't figure which one to use, Tesla or Jaguar Right now I'm on Tesla, testing stuff
Quick update, since GZR does not support our devices for some time now, they probably did not include the patch for headphones... would you mind to include it? I'm pretty sure that that bug is not present in Jaguar or DU
THANK TOU!
caki25 said:
You sir are a legend... Can't figure which one to use, Tesla or Jaguar Right now I'm on Tesla, testing stuff
Click to expand...
Click to collapse
Thank you. I am now on Tesla and it is hard to say which one is better. Jaguar is a little lighter, though. but Tesla guys have changed some animation timing, so, even if you turn off animation in developer section completely, it still feels a little different. I think Jaguar is lighter and a little faster, but Tesla feels smoother...
Does this and the jaguar ROM have the random reboot problems that Resurrection Remix is having?
Thanks.
YaqubYahya said:
Does this and the jaguar ROM have the random reboot problems that Resurrection Remix is having?
Thanks.
Click to expand...
Click to collapse
Not at all. Read the OP regarding random reboots on other roms...
optimumpro said:
Not at all. Read the OP regarding random reboots on other roms...
Click to expand...
Click to collapse
Oooooh, I'll most likely switch over tomorrow, which ROM do you recommend? Jaguar or Tesla?
Thanks for your great work!
optimumpro said:
Just flash C6902 modem on top: it is not a big deal...
Click to expand...
Click to collapse
Modem Zip never forked for me
Only cm12.1 is working for me without modem,
Either I always get a broken wifi on using modem
:crying:
happy3777 said:
Modem Zip never forked for me
Only cm12.1 is working for me without modem,
Either I always get a broken wifi on using modem
:crying:
Click to expand...
Click to collapse
You sure you used the correct one? http://forum.xda-developers.com/showthread.php?t=2614645
Works for others...
Hi, loving the rom! However is there any way of changing how curved the edges of everything is? I really don't like it, thanks.
YaqubYahya said:
Hi, loving the rom! However is there any way of changing how curved the edges of everything is? I really don't like it, thanks.
Click to expand...
Click to collapse
Have you changed screen resolution at all?
I don't know. I only start to see screen irregularities after 3-4 glasses of red wine.
optimumpro said:
You sure you used the correct one? http://forum.xda-developers.com/showthread.php?t=2614645
Works for others...
Click to expand...
Click to collapse
Ok I will try it today and report it 2 U
Thanx
How is the battery life on this ROM? That's my main prblm
optimumpro said:
Have you changed screen resolution at all?
I don't know. I only start to see screen irregularities after 3-4 glasses of red wine.
Click to expand...
Click to collapse
I think he's referring to the rounded corners of the notifications and the recent apps.
OT: I personally like it
What is the differentiating feature of this..
New kernel. See OP for description
optimumpro said:
New kernel. See OP for description
Click to expand...
Click to collapse
Can I flash this via twrp?
Ohhdayumm said:
Can I flash this via twrp?
Click to expand...
Click to collapse
No, it's a boot.img, so, you'll need a laptop...

[ROM][9] LineageOS, ResurrectionRemix, AEX, PE // personal builds

This thread was formerly "[ROM][9] LineageOS 16.0 + AOSPExtended + PixelExperience // personal builds" - yes, once again, the title can't fit the full names of all these ROMs :/
This thread hosts personal builds of LOS 16.0 and other Android 9 (Pie) ROMs for Mix 2, currently built from @wight554 's trees. Similar to Oreo, full credits to Wight and others behind the scene for the bringup, allowing us to build upon the awesome work.
Currently I build the following ROMs, usually monthly (in sync with security patch):
LineageOS 16.0
ResurrectionRemix 7
AOSPExtended 6
PixelExperience 9
Small changes in my builds:
Default stretch-to-fullscreen (force apps to render in 18:9) - LOS official solution defaults to OFF, which complicates setup
Grey-blue DeskClock color scheme (when possible)
Navbar stays on the right side of the screen under 270° rotation (optional - set the behaviour with "setprop persist.ui.seascape.disable <true|false>" in a rooted shell)
Signature spoofing support from MicroG
...
What's working:
Everything?
Instructions:
Coming from official MIUI? Since the new encryption has been implemented, you only need to wipe (not format) /data.
Flash any Pie firmware (firmware Stable V10.4.1.0 recommended) for builds starting from May, or firmware Stable V10.0.2.0 otherwise.
Use official TWRP or OrangeFox.
Download the latest build and optionally GAPPS (PE comes with GAPPS though, don't use any from external sources)
Reboot to TWRP
Flash the latest build, GAPPS and whatever other additions you need
Reboot
Extras:
Read here if you want to use unencrypted data - post is from Oreo thread, but still applies to Pie
Downloads:
SourceForge folder: https://sourceforge.net/projects/andyyan/files/ - new releases in the "9" folder
Root: use Magisk
Google Apps: http://opengapps.org/
Source Code:
https://github.com/LineageOS/
https://github.com/wight554/
About "official" status:
Currently I don't plan to apply for "official" for any of these ROMs, because 1) Wight is the actual maintainer who did the bringup and maintenance work, and 2) I like to be able to apply changes at will to the OS itself without restrictions from the official team.
Donation:
Donate to @wight554
Donate to me
XDA:DevDB Information
LineageOS 16.0, ROM for the Xiaomi Mi Mix 2
Contributors
AndyYan, wight554, Cozzmy13
Source Code: https://github.com/LineageOS/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI V10.4.1.0
Based On: LineageOS
Version Information
Status: No Longer Updated
Created 2018-09-25
Last Updated 2019-09-27
Reserved
Just an additional note: I'm not as enthusiastic about building ROMs as I was early this year, so expect less regular updates and/or unanswered fix/feature requests. I'm just a builder, not nearly as capable of Demon or Wight doing all the heavy lifting, so I'll only do what my ability/time permits.
Thanks for all your work, Andy
Works like a charm. Only thing I noticed that traffic on the status bar won't be displayed.
Fairtex said:
Works like a charm. Only thing I noticed that traffic on the status bar won't be displayed.
Click to expand...
Click to collapse
Statusbar customizations like network traffic aren't merged yet, just wait.
Can we have that slide down gesture to bring the notification bar down like we had in PE Oreo? Thanks
Hey,i have a question. Is it possible to port full screen gestures from miui 10 to los 16?
Are the quick settings on the status bar still a bit off on PE edition?
Folks who have tried, please do let me know about the battery consumption. This build added some CPU governors to the kernel and defaulted little cluster to one of them, and I'm not sure of its actual impact. It's my first time fiddling with kernels and I can't guarantee the change will be satisfactory.
Fairtex said:
Are the quick settings on the status bar still a bit off on PE edition?
Click to expand...
Click to collapse
I acknowledge the lack of padding there, but I don't quite want to look into it now. It's supposed be a problem for PE upstream anyway.
Greetings!
I've downloaded the rom last night. And until now, I have no problem: the camera works perfectly, the sound sound good and gaming performance are good.
The thing which attracted me was the mention of "Lineage OS" and I'm not disappointing to see that it's so close of the official and stable version . I'm blind in context of "find the bugs", so maybe we could find some but this is not my domain.
Is it possible to have the full screen for apps in this rom? I mean the option without the bars on the top and the botom of the screen
jimmys121979 said:
Is it possible to have the full screen for apps in this rom? I mean the option without the bars on the top and the botom of the screen
Click to expand...
Click to collapse
Install custom navigation bar .Its work fine
Wysłane z mojego MI MIX 2 przy użyciu Tapatalka
jimmys121979 said:
Is it possible to have the full screen for apps in this rom? I mean the option without the bars on the top and the botom of the screen
Click to expand...
Click to collapse
Expanded Desktop is a feature that will surely be merged in the future. As the other user said, there are 3rd-party apps that can achieve the same goal. I myself am using Tiles since it places a shortcut in Quick Settings.
Hi I haven't touched this kind of thing I'm a few months and I forget some of the finer details.
I have a few questions.
Firstly, do you have to add treble to your mix 2 to get this to run, or is that optional? If so can someone please send me a link to the thread. Would be greatly appreciated.
Secondly, I am on RR6 based on 8.1, if I just do a general wipe and flash the new ROM and gapps over the top, will this cause issues?
Lastly, I am on Icemans TWRP, do I HAVE to use the one suggested in the description (I did read it before someone yells at me, I just want to know if I HAVE to, because I'd need to set up ADB on a PC again and that would be a real pain in the behind).
Many thanks in advance as usual guys. Love your work and appreciate your patience and effort with this kind of thing. God bless
MrSammyMcG said:
Hi I haven't touched this kind of thing I'm a few months and I forget some of the finer details.
I have a few questions.
Firstly, do you have to add treble to your mix 2 to get this to run, or is that optional? If so can someone please send me a link to the thread. Would be greatly appreciated.
Secondly, I am on RR6 based on 8.1, if I just do a general wipe and flash the new ROM and gapps over the top, will this cause issues?
Lastly, I am on Icemans TWRP, do I HAVE to use the one suggested in the description (I did read it before someone yells at me, I just want to know if I HAVE to, because I'd need to set up ADB on a PC again and that would be a real pain in the behind).
Many thanks in advance as usual guys. Love your work and appreciate your patience and effort with this kind of thing. God bless
Click to expand...
Click to collapse
Treble is built into the ROM itself, you don't need to flash anything to achieve it.
Judging from the fact that you're using a super old TWRP though, you likely are on an old/unencrypted RR, and thus will need DecScript if you don't want to format /data (read OP).
That TWRP is MANDATORY, though most TWRP builds allows flashing images within ("install image" option), so you might not need a PC.
AndyYan said:
Treble is built into the ROM itself, you don't need to flash anything to achieve it.
Judging from the fact that you're using a super old TWRP though, you likely are on an old/unencrypted RR, and thus will need DecScript if you don't want to format /data (read OP).
That TWRP is MANDATORY, though most TWRP builds allows flashing images within ("install image" option), so you might not need a PC.
Click to expand...
Click to collapse
That was really helpful thanks. I am running unencrypted and what do you mean treble is but into the rom? Is it old style with device drivers built in or will flashing the new ROM flash the drivers to whatever partition they have to go to and give me treble?
MrSammyMcG said:
That was really helpful thanks. I am running unencrypted and what do you mean treble is but into the rom? Is it old style with device drivers built in or will flashing the new ROM flash the drivers to whatever partition they have to go to and give me treble?
Click to expand...
Click to collapse
This is Treble-enabled but this is NOT a GSI (Generic System Image). You still flash as you would do a regular ROM, just with a Treble-enabled recovery.
Quick update to sync with Wight's updated battery data - from this build on you're supposed to use newer firmwares. OP has been updated with the mandatory new firmware requirement and TWRP build from Wight.
Thanks for your work,I have used aex for two days.It is very nice.But I notice a small problem that sometimes the fingerprint unlock is very slow and I have to touch several times to unlock it.Is it a bug of this rom?
Duble tap on screen for wake up dosent works too

A300FU Lineage 16.0 Selfbuild Bootproblem [SOLVED]

hi all
my story:
i got my hands on a samsung galaxy a300fu (aka. a3ulte) 2015 and successfully installed twrp3.2.3 and a custom lineage build version 14.1. my goal however is to build, install and boot lineage 15.1 or lineage 16.0. the building is not the problem! i can build both versions (with help of the lineage wiki and the local manifest from the github user "Galaxy-MSM8916"). i can also install them however i'm unable to boot them.
what i tried so far:
- the mentioned github user offers multiple lineage 15.1 downloads for the device but none of them seem to boot (it crushed my PIT or something i needed to reflash the recovery image)
- since android 8.0 the debug mode is off so i needed to build an engineering version (another 4h) to get some kernel messages but i'm kind of overwhelmed with 11000 lines of debug (not counting the loops)
- on androidfilehost there is a lineage 16 build from the user vlw (also present here on xda) which strangely seems to be working! after checking its system properties file however it seems this build is kind of a hybrid (part a3lte, part a3ulte). also i'm unable to contact him that's why i'm writing here.
i'm pretty much out of ideas and would like to know if any of you has an idea how to proceed.
regards
edit:
related to github.com/Galaxy-MSM8916/android_device_samsung_gprimeltezt/issues/1
able to boot after renaming hardware/qcom/keymaster/Androir.mk to hardware/qcom/keymaster/Android.mk.nobuild

[ROM][4.4][EAS] Enchanted LineageOS 17.1 with 4.4 kernel

Enchanted LineageOS 17.1 with 4.4 Infinity EAS Kernel
Gemini forever alive!
Download:
TWRP with 4.4 kernel
LineageOS 17.1
Installation:
If you are on stock TWRP you need to flash 4.4 to avoid any problems like /data corruption!
You need to perform a factory reset (format /data)!
Flash rom, gapps/microG and optionally magisk.
Known bugs:
Camera hang in Snap when switching to HDR (click back button and open camera again, boom, it's working)
Join Mi5 group on Telegram
Please consider donating to my hard work
https://paypal.me/xNombre
XDA:DevDB Information
Enchanted LineageOS 17.1 with 4.4 kernel, ROM for the Xiaomi Mi 5
Contributors
xNombre
Source Code: https://github.com/xNombre
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2020-01-06
Last Updated 2020-04-02
Reserved
Antutu Score
Reserved
¯\_(ツ)_/¯
Thanks for your hard work
hi
tanx 4 ur hard work
i want know about battery life plz..
install instruction?
and best frimware?
tanx
Can not change battery icon style it is stuck on Icon Portrait.
Hi @xNombre, just 2 quick questions regarding the the kernel used in your LOS release:
1- Does the kernel support HW Encryption? I remember on Havoc 2.9 (Android P) there was a port of 4.4 kernel with working HW crypto.
2- Will you release a standalone package of the infinity kernel in the future that can be used with other ROMs?
Thanks!
do we need jdc treble for this or what? since it "treble"
What about battery life?
can i flash other android 10 gsi based on this rom since it "treble"
immediately banned from telegram group right after joined. not even wrote a message or got a warning. interesting way to manage a community group.
i'll be around for feedbacks. thanks for your effort anyways.
nebik said:
Can not change battery icon style it is stuck on Icon Portrait.
Click to expand...
Click to collapse
It's LOS bug.
3V0LU710N said:
Hi @xNombre, just 2 quick questions regarding the the kernel used in your LOS release:
1- Does the kernel support HW Encryption? I remember on Havoc 2.9 (Android P) there was a port of 4.4 kernel with working HW crypto.
2- Will you release a standalone package of the infinity kernel in the future that can be used with other ROMs?
Thanks!
Click to expand...
Click to collapse
1. AFAIR not yet because it's not merged on LOS.
2. Probably no because there are too many custom changes made (dt & vendor) and I don't like listening to moaning that something is broken. I want to release more interesting ROMs some day (Syb... uhh ekh... eria).
shandianex1 said:
can i flash other android 10 gsi based on this rom since it "treble"
Click to expand...
Click to collapse
Hmmm, that's interesting question. I've only focused on making it fulfill all Android Q requirements concerning vendor separation (and such as APEX), not intended to make it GSI friendly. I guess there are still some incompabilities and you can't expect such and old device to be GSI friendly.
jackryder38 said:
What about battery life?
Click to expand...
Click to collapse
Test yourself, the biggest culprit about I can do nothing more is RIL. Maybe when Xiaomi releases Q for daisy, the blobs will make it better.
RmznDndr said:
immediately banned from telegram group right after joined. not even wrote a message or got a warning. interesting way to manage a community group.
i'll be around for feedbacks. thanks for your effort anyways.
Click to expand...
Click to collapse
The group is protected with antibot, I've checked your nickname and youre not banned for sure.
Enchanted LineageOS updated!
Changelog:
Merge latest kernel_common and CAF tag into kernel
Merge latest branch into qcacld driver
Use fq_codel queuing discipline, faster net
Update some blobs (those I have access to) from LA.UM.8.6.r1-02900-89xx.0
Remove unused move time data script
Add missing wifi mac generator
Fix USB tethering
Uprev Mapper to 2.1
Tweak Dalvik parameters accroding to new google configs
Go back to stock WiFi config and add some new Xiaomi edits - fixes connectivity problems
Rootdir updates
Minor cleanup
Fixup microG location
Massive overlay update from LA.UM.8.6.r1-02900-89xx.0
Selinux enforcing
Safetynet PASS!!!
Important LOS updates:
Fixed battery style
Updated to android 10.0 r23
Added survival script (magisk reflashes itself)
Repo sync all
Download via sf:
https://sourceforge.net/projects/xn...-17.1-20200119-UNOFFICIAL-gemini.zip/download
Please consider donating...
https://paypal.me/xNombre
xNombre said:
Enchanted LineageOS 17.1 with 4.4 Infinity EAS Kernel
Known bugs:
Speaker playing only left channel
5GHz hotspot
Camera hang in Snap when switching to HDR (click back button and open camera again, boom, it's working)
Click to expand...
Click to collapse
Fixed?
PavelPerm said:
Fixed?
Click to expand...
Click to collapse
Camera still hangs on HDR on/off. 5Ghz Hotspot works and about speaker i do not know.
nebik said:
Camera still hangs on HDR on/off. 5Ghz Hotspot works and about speaker i do not know.
Click to expand...
Click to collapse
Use this Gcam
https://easyupload.io/5ms9tu
It's version 7.2 - optimized and working 100% on gemini
PavelPerm said:
Fixed?
Click to expand...
Click to collapse
Not listed so not fixes, I thought it's clear.
New build could have some problems due to selinux change (dt2w or so) and I will push hotfix when I can.
xNombre said:
Not listed so not fixes, I thought it's clear.
New build could have some problems due to selinux change (dt2w or so) and I will push hotfix when I can.
Click to expand...
Click to collapse
I have problem with permission name (icon != Permission name)

Categories

Resources