Related
Hi,
I am fairly new to rooting (infact this is my first post).So,please be gentle if i am violating any rules.
I had put JELLY BAM on my GNEX and it was running fine. I tried partitioning my memory which did not go well so then I tried reflashing my ROM , which again did not go well and accidentally i deleted my ROM and all of my backups. So basically I am not able to use my GNEX .
I have no ROM and was only able to access bootloader and recovery menu (TWRP) . So i tried flashing it thru NRT(by wugsfresh) and since then I am stuck in bootloop(Was trying to flash stock JDQ39) & upon that I am back to stock recovery of android. Also, now PC is not ready to detect my GNEX as ADB device.
Please help me out, I am in dire need of it. Cant find a simillar issue any where else.
Thanks in advance.
follow this: http://forum.xda-developers.com/showthread.php?t=1626895
work in progress
Zepius said:
follow this: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Thanks for the prompt reply. Halfway thru ..
Zepius said:
follow this: http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Nopes, still stuck in bootloop. Tried the tutorial twice now.
Also, earlier i was following the same procedure albeit from NRT.
Please suggest what is wrong with my phone and a possible solution
madforsoccer said:
Nopes, still stuck in bootloop. Tried the tutorial twice now.
Also, earlier i was following the same procedure albeit from NRT.
Please suggest what is wrong with my phone and a possible solution
Click to expand...
Click to collapse
put simply you probably trashed your partitions. you might have to use ODIN to repartition
madforsoccer said:
Nopes, still stuck in bootloop. Tried the tutorial twice now.
Also, earlier i was following the same procedure albeit from NRT.
Please suggest what is wrong with my phone and a possible solution
Click to expand...
Click to collapse
I had a similar problem. I thought it was because my disk was partitioned-screwed. So I tried this: http://forum.xda-developers.com/showthread.php?t=2065470
It didn't work for me, but it's worth a shot for you. Give it a go.
Will try the ODIN method.
Also, do you think I am experiencing persistent boot-looping because I wiped off my 'system' (did it for the first time)
coz i have been flashing ROM's and kernels on weekly basis now and this has never happened before.
Still not working, tried the ODIN part also, still stuck in boot-loop.
I jus want to know what exactly is the problem here..!!
getting frustrated now.
Hi all,
Since I am facing difficulties flashing ROM. IF only someone can share a backup image of ROM (CWM/TWRP) with me I can get it restored and flash another ROM later on as need be.
You said you partitioned your memory. What exactly do you mean by this, what did you do?
cupfulloflol said:
You said you partitioned your memory. What exactly do you mean by this, what did you do?
Click to expand...
Click to collapse
I was trying to implement swapper on my gnex , which when failed led to this mess i am in currently.
On reboots of my phone I get Kernel is not Seandroid Enforcing across the top of my boot screen ,anyone know what's causing this?
Something to be concerned about or a fix (if needed)?
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
Thanks.
Ignore,sorry.
lurk3r2013 said:
Ignore,sorry.
Click to expand...
Click to collapse
CAN'T .... IGNORE .... MUST POST REPLY .....
Okay, whew, much better now.
lurk3r2013 said:
On reboots of my phone I get Kernel is not Seandroid Enforcing across the top of my boot screen ,anyone know what's causing this?
Something to be concerned about or a fix (if needed)?
Click to expand...
Click to collapse
Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
I get it too, but my phone don't reboot tho.
I was on 5.0.1 and then flashed 5.1.1 bootloader and modem (followed guide from XtreStoLite).
Anyone know what to do?
Thanks in advance
Faspaiso said:
I get it too, but my phone don't reboot tho.
I was on 5.0.1 and then flashed 5.1.1 bootloader and modem (followed guide from XtreStoLite).
Anyone know what to do?
Thanks in advance
Click to expand...
Click to collapse
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Need help.
Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
So I have the same thing for my sprint galaxy s6 5.1.1 . Its rooted (obviously ) but i wanted to know if there was a way to remove the root and put everything back to normal without losing all my data. I can't connect to the google play store at all (check connection and try again). This is the main reason i want it to go back to normal. I used the unroot option in the supersu and tried uninstalling but i keep getting uninstall unsuccessful. I turned off oem unlocking and usb debugging. I dont know what else to do and im new to the site and dont know where to go for help so im posting here. Thanks in advance.
Lancerz said:
It's normal on 5.1.1 with a non stock kernel, nothing to be worried about.
Click to expand...
Click to collapse
Hello , it is normal also the smart manager in device protection keep threat found and the red shield ??
TKS!!:good:
same message for me, but all works fine.
1. is it causing a longer start time for the phone?
2. can we get rid of the message anyway?
Mine too, after rooted and flashing 5.1.1. If anyone know how to get rid of it, much appreciated.
Is this the cause of my private mode not working? How can I fix this issue
3RAN7ON said:
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Click to expand...
Click to collapse
I have the exact same issue, so how did you fix it? Exact details would be very helpful!
3RAN7ON said:
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Click to expand...
Click to collapse
Hi, im having the same issue on the same ROM. When you say you flashed the stock fimrware, do you mean the stock S6 software?
3RAN7ON said:
You get this fixed? I had this a few days ago and flashed the whole firmware, recovery and boot and it worked
Click to expand...
Click to collapse
I try to flash stock firmware through Odin but get a fail notification. I want to return to complete stock and unroot... no clue what's going on ?
prmntxmanny said:
I try to flash stock firmware through Odin but get a fail notification. I want to return to complete stock and unroot... no clue what's going on
Click to expand...
Click to collapse
I got the same problem, i am going to load latest fw on it but i dont want to lose my internal storage but i cant boot phone
Solution!
flipper2006 said:
I got the same problem, i am going to load latest fw on it but i dont want to lose my internal storage but i cant boot phone
Click to expand...
Click to collapse
Procedure: On KIES3 go to Tools - Firmware Upgrade and Initialisation, Put the Model and Serial, Preceed to put the cellphone on download mode and restore the phone and is Solved!
prmntxmanny said:
I try to flash stock firmware through Odin but get a fail notification. I want to return to complete stock and unroot... no clue what's going on
Click to expand...
Click to collapse
restore your phone with kies that will install stock firmware
I have the same problem (same exact phone) can somebody help? I don't know what to
:crying:
lurk3r2013 said:
On reboots of my phone I get Kernel is not Seandroid Enforcing across the top of my boot screen ,anyone know what's causing this?
Something to be concerned about or a fix (if needed)?
Click to expand...
Click to collapse
hi guys, i have the same message when i swich on the phone "Kernel is not seandroid enforcing but i can't reboot the phone, i tried it from the setting (It's not working) so i try buy another way the on/off button + the button sound down (it's not working too) could you help me please?
Device: LG G3
Rom: [AOSP EXTENDED V3.0] [LG G3 - D855] [OFFICIAL] [NOUGAT R9] [by MARCHETTO96]
Hey again,
So i'm running this rom right and I was reinstalling my apps onto my phone and one app I need to log into but it noticed it was running root (Snapchat). So I followed someones advice on here on XDA to fully unroot the device and I did that I fully unrooted the app from the phone and then here comes the worst part that I realized this will kick me out of recovery and i wont be able to get back in because I need to get on to recovery to re install superSU back on. So im stranded on nougat 7.1 and dont have access to root at all except for root access on developer settings but that doesn't nothing at all I re installed the app on play store but its telling me the phone is unrooted of course.
Anyone can help me out here. It would be greatly appreciated .
P.S I did get snapchat working after that method kinda did work/backfire at the same time.
Do you have nandroid backup? If yes, flash that. It will be all well.
Other hard method is to downgrade to KitKat and then root and then TWRP. ?
I do not have a back up for this ROM but I have other back ups on my phone that still works. I can't do it as well cause I neeed root to l get it to work.
HunterTubeHD said:
I do not have a back up for this ROM but I have other back ups on my phone that still works. I can't do it as well cause I neeed root to l get it to work.
Click to expand...
Click to collapse
Backups don't need root. They need TWRP to be flashed.
Jahanzaibawan said:
Backups don't need root. They need TWRP to be flashed.
Click to expand...
Click to collapse
Yeah thats the only thing I can't get access to TWRP. When I fully unrooted It would not let me in my recovery at all just bootloops until i take the battery out then it reboots to the system fine.
Just going to ask a hopefully obvious question that I know doesn't help but I'm intrigued... Why didn't you just unroot using the supersu app?
pffcouk said:
Just going to ask a hopefully obvious question that I know doesn't help but I'm intrigued... Why didn't you just unroot using the supersu app?
Click to expand...
Click to collapse
I did do that....now my main problem is I don't have root anymore and I can't get access to my recovery and plus I'm running an Nougat rom so I need to find a way to re-root my phone again to get it all back.
The supersu app doesn't delete the recovery on your phone so something had to have gone wrong. Either way the best bet for you I would imagine anyway would be to follow a guide to install recovery - it's been that long since I had to do it I can't be of much help but I'm willing to look into the easiest options for you if you want. There will be a way, pretty much guaranteed
pffcouk said:
The supersu app doesn't delete the recovery on your phone so something had to have gone wrong. Either way the best bet for you I would imagine anyway would be to follow a guide to install recovery - it's been that long since I had to do it I can't be of much help but I'm willing to look into the easiest options for you if you want. There will be a way, pretty much guaranteed
Click to expand...
Click to collapse
I know that my recovery is still there but It wont allow me on there for some reason. But im thinking that If I factory reset the phone it would PROBABLY fix the problem but theres one risk that it could probably happen and im guessing that it will go straight into a bootloop. If you want to help me It would be great
I'll research for you mate!
Did you modify your ro.product.model in build.prop file and when supersu app asks if you want to flash stock recovery you pressed yes?
For example if you have enabled google assistant by changing your ro.product.model to pixel or pixel xl and after that unrooted and pressed yes to restore stock recovery (to get OTA to work), supersu flashes pixel recovery and thats why you can't get to recovey again.
There are ways to get your phone back to factory clean and start over.
Okay I have spent a whole day figuring out this problem but i finally managed to fix it.
So I went onto download mode
opened up LG Flash Tool 2014
Flashed an LG KDZ File managed to work after the 2nd time
10 or 15 mins later it finally worked
LG started to boot up and started loading in the apps
THEN
I rooted the phone again using this forum: https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268
Then I finally got back onto the glorious TWRP rom.
I re-installed the ASOP rom again.
I'd Like to thank Juhkimo, Jahanzaibawan and pffcouk for helping me out. You guys got my phone back to what it was before so thanks a ton
HunterTubeHD said:
I'd Like to thank Juhkimo, Jahanzaibawan and pffcouk for helping me out. You guys got my phone back to what it was before so thanks a ton
Click to expand...
Click to collapse
Really good to hear that :highfive:
Hello, Good Day to all! I wont take too much of your time but please help me!
My Oneplus 3 suddenly bricked itself, I dont know how or why but it just powered off and then when I tried to boot it up it was hard bricked. Now I've managed to fix it by following the Mega Unbrick guide for Oneplus 3 and it boots up, but the problem is it crashes during boot, and it randomly crashes after a few minutes which then leads to the boot logo crash, I have to "let it rest" so to speak for a few minutes so that it would bypass the boot crashes. Once it got past the crashes some apps are not responding like Twitter, Messenger and so on. Stock apps are fine it's the newly downloaded ones that are not responding, I tried numerous factory resets using the stock recovery and TWRP but no luck.
I am on Nougat 7.1.1 on the latest OxygenOS version, Unlocked bootloader with systemless root. I haven't tried flashing a custom rom the only thing I tried to flash was the Stock Rom. I also noticed that the WiFi and the Data/Signal was particularly weaker since the messages would not load, I need to actually check the app for it to sync. When I got Messenger somehow working, the messages would not even load up.
Any ideas what the problem is? Any help is deeply appreciated, Thanks in Advance!
Hi.. Good Day
This may be a motherboard issue why don't u give ur phone to service center to get it checked up once
RiskTaker10 said:
Hello, Good Day to all! I wont take too much of your time but please help me!
My Oneplus 3 suddenly bricked itself, I dont know how or why but it just powered off and then when I tried to boot it up it was hard bricked. Now I've managed to fix it by following the Mega Unbrick guide for Oneplus 3 and it boots up, but the problem is it crashes during boot, and it randomly crashes after a few minutes which then leads to the boot logo crash, I have to "let it rest" so to speak for a few minutes so that it would bypass the boot crashes. Once it got past the crashes some apps are not responding like Twitter, Messenger and so on. Stock apps are fine it's the newly downloaded ones that are not responding, I tried numerous factory resets using the stock recovery and TWRP but no luck.
I am on Nougat 7.1.1 on the latest OxygenOS version, Unlocked bootloader with systemless root. I haven't tried flashing a custom rom the only thing I tried to flash was the Stock Rom. I also noticed that the WiFi and the Data/Signal was particularly weaker since the messages would not load, I need to actually check the app for it to sync. When I got Messenger somehow working, the messages would not even load up.
Any ideas what the problem is? Any help is deeply appreciated, Thanks in Advance!
Click to expand...
Click to collapse
This sounds like an hardware issue, have you tried method 2 of the unbrick tool, perhaps you could try to re-download it, have you unzipped it? If it boots let it boot and then upgrade to a new OOS version and then you can do whatever you want. If it doesn't work after you followed my suggestions you might wanna contact Oneplus, don't worry even though your bootloader is unlocked you still have full warranty..
Puddi_Puddin said:
This sounds like an hardware issue, have you tried method 2 of the unbrick tool, perhaps you could try to re-download it, have you unzipped it? If it boots let it boot and then upgrade to a new OOS version and then you can do whatever you want. If it doesn't work after you followed my suggestions you might wanna contact Oneplus, don't worry even though your bootloader is unlocked you still have full warranty..
Click to expand...
Click to collapse
I did the method 2 of the unbrick tool, I've done it like twice or thrice now. I have the latest version of OOS, I am afraid to flash a custom rom because after it flashes in TWRP it immediately crashes, it does not even give me a chance to clear the dalvik or reboot. It crashes no reboot or anything.
But thank you I didn't expect anyone would reply well I regained my faith in humanity in forums
Sidenote: What custom rom would you suggest? or is the stock rom better?
RiskTaker10 said:
I did the method 2 of the unbrick tool, I've done it like twice or thrice now. I have the latest version of OOS, I am afraid to flash a custom rom because after it flashes in TWRP it immediately crashes, it does not even give me a chance to clear the dalvik or reboot. It crashes no reboot or anything.
But thank you I didn't expect anyone would reply well I regained my faith in humanity in forums
Sidenote: What custom rom would you suggest? or is the stock rom better?
Click to expand...
Click to collapse
I would suggest VertexOS. It's simple and really fast, EAS and Voxpopuli takes peformance per watt to the next level, if you like feature you might try Zenixx RR.
hrishikeshgramani said:
Hi.. Good Day
This may be a motherboard issue why don't u give ur phone to service center to get it checked up once
Click to expand...
Click to collapse
Unfortunately that is out of the question, there is no Service Center for Oneplus where I live so I cant get it checked ASAP
Puddi_Puddin said:
I would suggest VertexOS. It's simple and really fast, EAS and Voxpopuli takes peformance per watt to the next level, if you like feature you might try Zenixx RR.
Click to expand...
Click to collapse
Thanks for the suggestion! Should I YOLO and flash a custom rom even though my phone is like this?
RiskTaker10 said:
Thanks for the suggestion! Should I YOLO and flash a custom rom even though my phone is like this?
Click to expand...
Click to collapse
You can always try..
Puddi_Puddin said:
You can always try..
Click to expand...
Click to collapse
Okay thanks good citizen of XDA I'll try to flash a custom rom and I'll try to report back here ASAP
anyone here that has successfully flashed this model of the rm 6 pro with a global rom? does that work or will i brick it?
Bet your the first tester to find out
Pachacouti said:
Bet your the first tester to find out
Click to expand...
Click to collapse
no, im too scared im a newb in this and i dont want to brick it. if i brick it i will be lost cause im a newb
And noobs had to start somewhere. So say someone says it works, then what will you do?
Pachacouti said:
And noobs had to start somewhere. So say someone says it works, then what will you do?
Click to expand...
Click to collapse
i would give it a try ^^
But your replying to me. I'd be shredding cables by now lol, but hey, is it possible your fone is a rebranded redmi 6 pro? Plenty of tuts here for that, but I'll try to help/guide you should you need it, tell me, what stock flashing application will you use to flash your stock BACK in case of a mistake?
Pachacouti said:
Pachacouti said:
But your replying to me. I'd be shredding cables by now lol, but hey, is it possible your fone is a rebranded redmi 6 pro? Plenty of tuts here for that, but I'll trry to help/guide you should you need it, tell me, what stock flashing application will you use to flash your stock BACK in case of a mistake?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
the problem is that the vendor from china put some crippled stock rom on my phone where they removed the system update service and so i cant do a local update with the phone. my rm 6 telegram group suggested that i install the qcom 9008 usb driver on my pc and boot my phone via adb into qcom 9008 edl mode and use miflash to flash it with a 4.15 unbrick package and if this would work i would have intact system update again and could flash it with a local update with the firmware id like. thanks for the help btw. gotta go out in 5 minutes but be back in a bit. please give me your opinion, i will read it once im back
What you wrote sounds good. Your flashing app is miflash. Download the 4.14 unbrick, and load it into miflash without fone plugged in, power fone OFF, start the miflash, hit download/flash (dont know the actual button to do the damage), then plug turned off fone into usb, miflash should auto find and flash, anything after that, feel free to ask.
Ps you could just jump in the deep end and flash the one you WANT, so that if it fails you'll know if it works or not, and will have tested a rom before flashing your stock back, kinda better than flashing stock first in a way.
Pachacouti said:
What you wrote sounds good. Your flashing app is miflash. Download the 4.14 unbrick, and load it into miflash without fone plugged in, power fone OFF, start the miflash, hit download/flash (dont know the actual button to do the damage), then plug turned off fone into usb, miflash should auto find and flash, anything after that, feel free to ask.
Ps you could just jump in the deep end and flash the one you WANT, so that if it fails you'll know if it works or not, and will have tested a rom before flashing your stock back, kinda better than flashing stock first in a way.
Click to expand...
Click to collapse
thanks for the suggestions! i want to give this a try as soon as i have some time. buthow do i backup my current stock rom in case the new rom wont work? i only know about rom manager app but that needs a rooted phone and mines isnt rooted. is there a way to backup the stock rom without having a rooted device?
Forget backing that up, your already at the stage where you learn if you back this up now, you MAY also back up the problem and have to do it all again, take my advice, keep it simple.
For your 'backup' - download latest official stock from your fone maker.
You may want to revert back AFTER you test the one you want to test.
So test first while it's 'broken' knowing once you go back to stock, it aint broke, dont fix it.
Pachacouti said:
Forget backing that up, your already at the stage where you learn if you back this up now, you MAY also back up the problem and have to do it all again, take my advice, keep it simple.
For your 'backup' - download latest official stock from your fone maker.
You may want to revert back AFTER you test the one you want to test.
So test first while it's 'broken' knowing once you go back to stock, it aint broke, dont fix it.
Click to expand...
Click to collapse
hey there! thanks for your tips, i appreciate it! ok just to clear things up, with "stock" firmware, you mean the official latest chinese firmware from the chinese nubia page, right?
Yup, if thats what you know is your STOCK, ie, not the one you wanna test, but in your scenario, I'd flash the test before stock, this way you gain experience flashing, and if you mess up, then you flash the stock, and learn not to. (again lol)
To clarify, stock is the firmware the fone maker has on their site.
Follow thir instructions, it's easier than you think, as my auld man told me, when testing, write down every step, so you REMEMBER instead of being unsure because I forgot....
Pachacouti said:
Yup, if thats what you know is your STOCK, ie, not the one you wanna test, but in your scenario, I'd flash the test before stock, this way you gain experience flashing, and if you mess up, then you flash the stock, and learn not to. (again lol)
To clarify, stock is the firmware the fone maker has on their site.
Follow thir instructions, it's easier than you think, as my auld man told me, when testing, write down every step, so you REMEMBER instead of being unsure because I forgot....
Click to expand...
Click to collapse
ok i got it. thanks for the help! i have the stock ready on my computer. unfortunately i cant flash my phone by following the manufacturers steps because my phone vendor flashed my phone with some custom chinese multi language firmware with google already pre installed. and whoever edited this firmware before flashing it on my new phone, removed the system service that is necessary to launch the "system update" options. therefore i have no way of making a local firmware update in my phone. unfortunately the red magic 6 pro also does not have a local update option in the recovery menu. thats why my only option is flashing the phone with my computer. but in the worst case i will have the latest stock rom on my phone in the end and this will have the system update options intact. thanks again for all the help!