You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Warning: As seen in the video at the 10:26 mark it is very important as a beginner that you make sure the surface is level (Use a physical bubble level and have business cards nearby) and leave the alignment bars (Plastic L Shapes) on during the curing process with the UV light, otherwise the screen protector may slide off of the phone. I was doing this for a friend at his house with the table he had, therefor as you saw at the 10:26 mark it began to slide away. Me doing so many installations I was use to this sort of thing happening, and quickly corrected the issue. I find the alignment bars to get in my way when moving the screen to the most case friendly position. However when I started out I did use these alignment bars, think of them as training wheels. Just be sure when you manually align the screen protector that the alignment bars are not lifting out of their 3 bumps and that they are not lifting your screen. Make sure your surface is level otherwise the adhesive could pour over the edges of the phone. Business cards help immensely, along with not working on installation in the middle of a 2 piece table.
Review
Before I continue please keep the "It's too expensive" posts out of here. Other glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Confirmed List
Commuter
Symmetry
UAG
https://youtu.be/sScL3ZyGTgI
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Here's a review of the Mophie case with the Whitestone:
I'm also using the whitestone dome.
I highly recommend it.
It won't take an hour to install it, but DO take your time.
Also, when it's installed and cured, when you use the LAST alcohol wipe, scrub the side of the phone too! I had a little leakage and it's oily and nasty.
thedarkmunk said:
I'm also using the whitestone dome.
I highly recommend it.
It won't take an hour to install it, but DO take your time.
Also, when it's installed and cured, when you use the LAST alcohol wipe, scrub the side of the phone too! I had a little leakage and it's oily and nasty.
Click to expand...
Click to collapse
Yea I covered that in the video as well. It smells really strong so I would def use the wipe on the entire phone.
I'm also using the Whitestone. It's seriously the best solution. It's like $45, but that's the only screen protector you will need to buy. I've wasted more than $45 trying out different, crappier screen protectors. Should have just gone with Whitestone to start with.
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
monkeyhandler said:
I'm also using the Whitestone. It's seriously the best solution. It's like $45, but that's the only screen protector you will need to buy. I've wasted more than $45 trying out different, crappier screen protectors. Should have just gone with Whitestone to start with.
Click to expand...
Click to collapse
For sure. I learned this lesson the hard way with my Galaxy S7. I am just thankful that Whitestone actually noticed how upset everyone was with the curved edge screen protector market.
Whitestone Dome Glass said:
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
Click to expand...
Click to collapse
Wow I can say I am pleasantly surprised. I didn't think that I would catch the attention of Whitestone themselves. Absolutely brilliant idea with the screen protector I must say! I really appreciate the positive feedback and will make note of your feedback in the topic and video! I do typically remove the alignment bars pre-cure as they get in my way for aligning below the camera. They tend to lift up and sometimes lift the screen protector up while I adjust towards the edge of the camera. My video is the perfect example of making sure you have a level surface and I will make a note in the video and in this topic that newer purchasers of Whitestone will want to have a physical bubble level nearby to complete the task or potentially have level issues as shown in the video or to be sure and keep the alignment bars installed and make sure to keep an eye on the edges for any possible lifting.
took me only 10 minutes to install and have been using for 2 weeks now. no problems at all. This is the best tempered glass protector out there
Thanks for the tips and video !
Ordered one
Does the glue leave any residue if for whatever reason you need to remove the screen protector?
Sent from my SM-G955U1 using Tapatalk
Hello all,
I order this screen protect after watching the video (thank you for the great video). I would have to say this is one of the best screen protectors that I have personal used.
After installing the screen protector and admiring the sexynes i decided to purchase a clear case from Spigen Ultra Hybrid - Crystal . After one day of use I notice that the screen had lifted on the bottom left ??? and now I have a line of air bubbles.
Does anyone have any suggestion on a clear case to use with this screen protector. I thought the video suggested this one to work but probably I did something wrong.
Any suggestions on what clear case to use (please no thin clear case)
Or how can I fix the air bubbles....
???
monkey39 said:
Does the glue leave any residue if for whatever reason you need to remove the screen protector?
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Apparently no.
Got mine In the mail, but no UV light. Will I need it?
Sent from my SM-G955U using Tapatalk
donguason said:
Got mine In the mail, but no UV light. Will I need it?
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Yes, it's needed to cure the glue.
bluediablito said:
Hello all,
I order this screen protect after watching the video (thank you for the great video). I would have to say this is one of the best screen protectors that I have personal used.
After installing the screen protector and admiring the sexynes i decided to purchase a clear case from Spigen Ultra Hybrid - Crystal . After one day of use I notice that the screen had lifted on the bottom left ??? and now I have a line of air bubbles.
Does anyone have any suggestion on a clear case to use with this screen protector. I thought the video suggested this one to work but probably I did something wrong.
Any suggestions on what clear case to use (please no thin clear case)
Or how can I fix the air bubbles....
???
Click to expand...
Click to collapse
I made a review on Amazon saying it's not compatible with that case...sorry bro.
donguason said:
Got mine In the mail, but no UV light. Will I need it?
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
You ordered the replacement glass ?
therock3181 said:
You ordered the replacement glass ?
Click to expand...
Click to collapse
Nope, it said kit and In the description it had the light and listed it. I contacted seller and has not responded.
Sent from my SM-G955U using Tapatalk
Gater2016 said:
I made a review on Amazon saying it's not compatible with that case...sorry bro.
Click to expand...
Click to collapse
I got too exited and just accepted the first review that said yes it's compatible.
Just got the tech21 and it works but now I need a new glass the spigen case gave me bubbles and the screen became unresponsive.
Thanks
---------- Post added at 10:48 PM ---------- Previous post was at 10:46 PM ----------
How do I go about buying only the glass?
I've had a whitestone on my phone for about 2 months now. Probably the best glass protector for curved screens. I hope they expand to more brands and models that have curved displays since it's the only one that works properly.
monkey39 said:
Does the glue leave any residue if for whatever reason you need to remove the screen protector?
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Hello monkey39, this is Whitestone.
There should be no glue left behind when removing the screen protector.
But if there are some residue, it can easily be removed with alcohol swab.
If you have any more questions or feedback, just reply here.
Thank you.
Whitestone Dome Glass said:
Hello monkey39, this is Whitestone.
There should be no glue left behind when removing the screen protector.
But if there are some residue, it can easily be removed with alcohol swab.
If you have any more questions or feedback, just reply here.
Thank you.
Click to expand...
Click to collapse
Hey, thanks for the reply! And, since you offered , another question: where can I buy one for the Galaxy S8 plus? I was looking on Amazon today, but could only find the one for the S8 - does this one fit both the S8 and S8 plus? https://goo.gl/K47KFc
Related
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
I'm currently using the SUPCASE Screen protector that came with my case: has everything I need to get it on once and only once(even comes with a lint remover film). Looks and feel great. I don't know what you mean by 'gummyness though, the only screen protector I would describe that has a gummy-like feel(especially when I pinch with my fingernail is the Skinomi brands.
pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
JoeSchmoe007 said:
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Click to expand...
Click to collapse
I'll second these. I had the ArmorSuit and it was terrible. These are cheap, durable and don't negatively affect the screen.I've been using one for over 2 months and it still looks fine.
The screen protectors from Motorola are very good.
pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
I bought a couple of the Mimeusa.com glass screen protectors, one for my wife and another for myself. Installed mine first, its a little different installing such a stiff protector, luckily i was able to lift it back up easily a couple times to adjust the positioning.
The wifes I installed a couple hours after, and it felt like it gave me more problems. didn't want to get positioned right, but eventually I got it lined up well.
The next day it fell off in her car while she was driving and got covered in dirt and dust on the adhesive side.
Mine is still on, after 2 weeks of use;
The texture is awesome! i hate most screen protectors, but this is glass and feels so good to the touch. you hardly notice its there.
It hasn't taken and scratches, and it does feel like fingerprints are less noticeable than on the bare screen.
I don't have a case of my X yet, ordered a bumper from amazon, but its not here yet.
I feel that the protector gathers small fibers easily at the edge. there are a couple of very small fibers that have worked there way just under the edge of the glass. They are hardly noticeable, especially when the screen is on.
I have not seen any new accumulation since the first few days, so maybe its more prone to catching the fibers in the hours / day after installation. I would advise avoiding pockets for 24 hours after installing this product if you can.
I will probably use this screen protector until it chips/breaks/gets too scratched up, and then go naked screen for the rest of the phones life.
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
Do you Google?
eksasol said:
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
Click to expand...
Click to collapse
That's very expansible for me i think...
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Wingdom said:
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Click to expand...
Click to collapse
+1 on this stuff. Been using it on my last 5 phones in the family. Especially great since the wife and I usually are yearly on replacement devices
Sent from my XT1053 using Tapatalk
Disclaimer: I posted this in a couple other threads, but I wanted to try and post it where I know we've been discussing tempered glass screen protectors.
Here's some pictures of the redesigned i-Blason protector. As you can see, there is now a cutout for the proximity sensor. The corners also fit the Moto X perfectly (their old design fit perfectly too). Very happy I finally have a protector that FITS and where the proximity sensor won't be blocked! I liked the i-Blason until I had started having proximity sensor issues because I had dropped it several times, and it never once cracked, unlike the MIME, which cracked the very first time I dropped it.
pasta1234 said:
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
Click to expand...
Click to collapse
i have tempered glass on my moto X ( mimeusa.com/product/moto-x-ghost-glass-screen-protector/ ) since january.
it was very easy to install and the feel is wonderful. my only complaint is that when you drop your phone, it can crack. better a crack on the protector than a scratch on the device, right? my phone has been pretty suicidal lately, what w/ jumping off tables, so it has accumulated many cracks on the protector. i am replacing it (with same ghost glass) and also buying a bumper case ... that may make a difference in the life span of the protector.
this is my first glass protector and yes i like it. on previous devices i used zagg screen protectors and was VERY HAPPY with them, but when i ordered their protector for the moto X, i found that they must have screwed up on the device specs, as the film didn't even cover the entire viewing screen. UNACCEPTABLE! i will not go back to their products.
I had the MIMEUSA and was very happy with the feel of the MIMEUSA, but it didn't fit properly. The corners were too squared and extended over the screen. The edges were also suppose to be beveled to prevent chipping but mine seemed like they were beveled out, leaving a lip on the glass. This all led to the edges chipping and eventually a larger break.
I ordered the i-Blason to try it and am very happy. The fit is perfect, its quite a bit thinner than the MIMEUSA, and it feels just as slick and smooth as the MIMEUSA and the glass screen. I would recommend the i-Blason over the MIMEUSA. And the i-Blason is only $17 on Amazon making it about the same price as the high quality plastic protectors.
James4.0 said:
The screen protectors from Motorola are very good.
Click to expand...
Click to collapse
+1. The Power Support protectors are very good. Their 15% off right now as well, till March 21st.
Well, I had to learn the lesson the hard way. It was night time and my niece wanted to catch some crawdads from the small creek in my brother's back yard. I put my phone in the pocket that had my keys (grr!) and crawled along the creekbed catching some crawdads for the kids. Well, the next day I noticed a small hairline scratch about 1cm long. Bummer! So my previously perfect M9 picked up it's first noticeable defect. :crying:
I read that the tempered glass screen covers will tend to make small scratches less visible and provide protection from future scratches. The one I am looking at is 0.33mm thick, so it will still create a bit of a "lip" at the top and bottom of the phone, but the case I use should cover the sides. I never put a screen protector on my M7 and after 1.5 years it was still in very good condition. Perhaps I should just be more careful in the future.
A couple questions:
Does anybody have experience using them with the M9?
Are they easy to remove?
Worth $10 and the hassle?
Thanks
Tried Tempered Glass on my G3 and never looked back.
Unparalleled screen clarity, easy to remove, easily worth the money. Just fit it slowly and carefully
Can't comment on it covering scratches though
I would say the money is worth it. I have one on my M9. They are easy to install just follow the steps. I personally, even if the glass protector on, never put my phone in a pocket with my keys or change or anything. the only thing in front right pocket is my phone and nothing else. this is the one I used http://www.amazon.com/Tech-Armor-Premium-Ballistic-Protector/dp/B00U6EZGCC hope this helps
daniel2744 said:
I would say the money is worth it. I have one on my M9. They are easy to install just follow the steps. I personally, even if the glass protector on, never put my phone in a pocket with my keys or change or anything. the only thing in front right pocket is my phone and nothing else. this is the one I used http://www.amazon.com/Tech-Armor-Premium-Ballistic-Protector/dp/B00U6EZGCC hope this helps
Click to expand...
Click to collapse
I use tech armor as well and used cailifu on my s5. Both work great. And haven't gotten a single scratch. Even when trying. Plus the warranty is awesome. My wife's broke 3 of them and I haven't even paid shipping for the replacements. And her phone still looks brand new.
Sent from my HTC One M9
The first thing I did when getting my M9 was to order a Spigen GlasTr screen protector. Though I tend to be careful with my phone, and I have a Seido case/holster, if it weren't for the Spigen glass protector, I would have surely broken my screen. I accidentally 'bobbled' it and the phone landed screen down on my (tile) countertop, chipping the protector. Had it not been there, I would definitely have a chipped or broken screen.
I can't say if applying a protector to your screen will help. I would just rely on the 'Uh,Oh' protection and request a new phone... and then immediately put a screen protector on the replacement. Yes, they're very easy to remove, but not so easy to install. See my guide here: CLICKY - it might help.
Just my two cents.
StilsonCanyon said:
Well, I had to learn the lesson the hard way. It was night time and my niece wanted to catch some crawdads from the small creek in my brother's back yard. I put my phone in the pocket that had my keys (grr!) and crawled along the creekbed catching some crawdads for the kids. Well, the next day I noticed a small hairline scratch about 1cm long. Bummer! So my previously perfect M9 picked up it's first noticeable defect. :crying:
I read that the tempered glass screen covers will tend to make small scratches less visible and provide protection from future scratches. The one I am looking at is 0.33mm thick, so it will still create a bit of a "lip" at the top and bottom of the phone, but the case I use should cover the sides. I never put a screen protector on my M7 and after 1.5 years it was still in very good condition. Perhaps I should just be more careful in the future.
A couple questions:
Does anybody have experience using them with the M9?
Are they easy to remove?
Worth $10 and the hassle?
Thanks
Click to expand...
Click to collapse
I'm currently using this:
http://www.amazon.com/Protector-LK-...ds=htc+one+m9+tempered+glass+screen+protector
Absolutely love it.
Bought one from amazon for a couple of quid, really cheap, easy to fit, job done. They can cover certain scratches from past experience depending on the deepness..
---------- Post added at 09:53 PM ---------- Previous post was at 09:50 PM ----------
www.amazon.co.uk/dp/B00U76SZWW
Thanks for the feedback folks . I ordered one from Amazon for $9...seems like a can't-go-wrong decision. Glad to hear that they offer the durability they promise.
Cheers!
BillTheCat said:
The first thing I did when getting my M9 was to order a Spigen GlasTr screen protector. Though I tend to be careful with my phone, and I have a Seido case/holster, if it weren't for the Spigen glass protector, I would have surely broken my screen. I accidentally 'bobbled' it and the phone landed screen down on my (tile) countertop, chipping the protector. Had it not been there, I would definitely have a chipped or broken screen.
I can't say if applying a protector to your screen will help. I would just rely on the 'Uh,Oh' protection and request a new phone... and then immediately put a screen protector on the replacement. Yes, they're very easy to remove, but not so easy to install. See my guide here: CLICKY - it might help.
Just my two cents.
Click to expand...
Click to collapse
Solid feedback. I try to not keep the phone in my pocket as well, but given that I would be leaning over water, the shirt pocket (a common place for it) was out of the question and I didn't have convenient spot to set it down (outside around a fire). The good news is that the scratch is very minor (I've stopped noticing it) and I have a feeling that the screen protector will diminish its appearance. I'm going to hold onto the Uh Oh protection in the event that something really bad happens.
I'll review your guide for tips on the install.
Thanks again!
StilsonCanyon said:
Thanks for the feedback folks . I ordered one from Amazon for $9...seems like a can't-go-wrong decision. Glad to hear that they offer the durability they promise.
Cheers!
Click to expand...
Click to collapse
Not just that but thankfully HTC haven't curved their screens, so there is no halo effect, for example, my last phone the Note 4 had the halo effect, absolutely horrible design floor.
I had the 9H brand on my M8 for the whole year and definitely worth it, so I ordered the 9H again same day I ordered my Dev Edition and installed it soon as I opened the M9 Box.
But I can't speak on the removal as I have never had to take it off for nothing..
Sent from my HTC One M9 using Tapatalk
Any disadvantages of the tempered glass screen protector? Just asking.
simonbigwave said:
Any disadvantages of the tempered glass screen protector? Just asking.
Click to expand...
Click to collapse
other than it adds 1mm to your phone depth i cant really think of one
Any difference in touch/feel with tempered glass protector vs plastic protector?
Of course. It feels like the original screen. I only use glass protectors
Gesendet von meinem HTC One M9 mit Tapatalk
simonbigwave said:
Any difference in touch/feel with tempered glass protector vs plastic protector?
Click to expand...
Click to collapse
as above. It's just like you're using the standard glass screen of the phone. I was worried that due to its slight increase in thickness it would perhaps affect the usage of my dot view case (being able to make calls to last few callers etc) but it works as it should. perfectly definately recommend them over plastic ones any day.
You guys have convinced me. I am going for the tempered glass next time I pass the shop.
simonbigwave said:
Any disadvantages of the tempered glass screen protector? Just asking.
Click to expand...
Click to collapse
Well as many said, the tempered screen protector are harmful to eyes. For me, sometimes, the touchscreen are not that sensitive when I'm unlocking the phone. However, it's not a big deal, wearing a screen protector makes me feel more safe. I bought it from an online supplier: http://www.etradesupply.com/htc-one-m9-tempered-glass-screen-protector.html
xymay said:
Well as many said, the tempered screen protector are harmful to eyes. For me, sometimes, the touchscreen are not that sensitive when I'm unlocking the phone. However, it's not a big deal, wearing a screen protector makes me feel more safe. I bought it from an online supplier: http://www.etradesupply.com/htc-one-m9-tempered-glass-screen-protector.html
Click to expand...
Click to collapse
How was tempered glass protector harmful to your eyes?
xymay said:
Well as many said, the tempered screen protector are harmful to eyes. For me, sometimes, the touchscreen are not that sensitive when I'm unlocking the phone. However, it's not a big deal, wearing a screen protector makes me feel more safe. I bought it from an online supplier: http://www.etradesupply.com/htc-one-m9-tempered-glass-screen-protector.html
Click to expand...
Click to collapse
Lol, this is a weird thing to read. How does a glass screen protector hurt your eyes? Unless you get it stuck in your eye? If a screen protector has been fitted correctly and its not super thick then you shouldn't have a single problem.
Hi
I have an issue when using a cover on my S8+
I tried 2 covers with my Panzer glass and they both pushed it off. Then i thought the glass was too big and the problem didnt lie in the covers.
Right now i have this cover http://www.skechit.co.uk/en/shop/galaxy-s8-plus/item/crystal-48
I live en Denmark and i just saw a post on a verizon glass and i cant get that here in DK
Can anyone help me out?
Why not try the Whitestone Dome like everyone else?
Ended up buying some kind of film instead. Cant find a place to buy the whitestone unless i want to pay 13£ shipping.
mkb0506 said:
Ended up buying some kind of film instead. Cant find a place to buy the whitestone unless i want to pay 13£ shipping.
Click to expand...
Click to collapse
Or you can do what I did. Buy a cheap tempered glass screen protector and a bottle of LOCA glue and a UV light and do it yourself. Takes a couple tries to get it just right, but totally worth it in the end.
dendrobates screen protector
mkb0506 said:
Ended up buying some kind of film instead. Cant find a place to buy the whitestone unless i want to pay 13£ shipping.
Click to expand...
Click to collapse
keep hope,it is available by Dendrobates screen protector.No edge lift,case friendly.Shipping is not that expensive.
Mr. Orange 645 said:
Or you can do what I did. Buy a cheap tempered glass screen protector and a bottle of LOCA glue and a UV light and do it yourself. Takes a couple tries to get it just right, but totally worth it in the end.
Click to expand...
Click to collapse
Seems like a top class solution, I would like to try, but so many questions, hope you don't mind.
What was the procedure you used, how did you get the glue to spread evenly? Did you cover the whole screen or just strategic parts? Did it affect screen sensitivity? How long is the curing process? How long has the protector been on your phone since application? Does it stop sides lifting when case fitted? What problems did you encounter?
Don't mean to impose on your time, but is it possible to do a step by step guide or vid, I'm sure many people here on xda would very much appreciate it.
Thanks in advance. Even if you're not able to do any of this, your input on this vexing issue is more than appreciated.
There's already a video someone else made. Go to YouTube and search for S8 screen protector LOCA. The only difference is I used an actual UV light instead of setting it out in the sun.
The first TGSP was on my phone for a couple weeks, then I dropped my keys on it and scratched it. This new one has been on for about a week now.
As far as problems? The install is messy, but other than that no issues at all.
dendrobates screen protector
take a look at the Dendrobates screen protector,made of hybrid material.may give you another option for fully adhesive for curved screen.
https://youtu.be/ksCnb3xlKU4
So, what's the best tempered glass screen protector that fits cases and has adhesive on the WHOLE SCREEN PROTECTOR? Thanks!
Right now, my stupid screen protector has adhesive only on the edges and it makes a click sound whenever I type -__- very annoying, so I want a tempered glass screen protector that has adhesive everywhere and fits cases. Thanks
Have you possibly tried reading any of the threads including what I see is the massively long thread about screen protectors in this sub-forum? Asking the question that's been answered without doing the research yourself isn't really useful and just adds more of the same messages.
Pitaka everything. Ive tried multiple "top rated" cases and protectors from amazon and pitaka has been the only one thats actually quality and actually makes sense of what its purpose is.
sanjsrik said:
Have you possibly tried reading any of the threads including what I see is the massively long thread about screen protectors in this sub-forum? Asking the question that's been answered without doing the research yourself isn't really useful and just adds more of the same messages.
Click to expand...
Click to collapse
Well, if you actually read my post, then you'd know I DID in fact read the 2 posts about screen protectors on here (the screen protector posts talk about screen protectors with adhesive on edges only). Maybe YOUU should read next time instead of posting smart ass useless comments that just make you look stupid
Whitestone dome glass there's a whole thread on it .it's the best
JoeFCaputo113 said:
Well, if you actually read my post, then you'd know I DID in fact read the 2 posts about screen protectors on here (the screen protector posts talk about screen protectors with adhesive on edges only). Maybe YOUU should read next time instead of posting smart ass useless comments that just make you look stupid
Click to expand...
Click to collapse
*sigh* my mother always said never argue with idiots, they'll drag you down to their level and beat you with experience. So many threads, so many of the same repeated questions, so much noise.
good luck on finding tempered glass that doesn't have one of many issues.
I tried a number and all failed, so I went with the old flexible film protection. easy to put on, protects the screen from scratches etc, and entire thing sticks very well. it comes already shaped as the screen as they are the official Samsung screen protection and you can get them here: https://www.amazon.com/gp/product/B06XDJ6CT2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I was REALLY REALLY regretting buying this phone until I found this. You get 2 of them for that price by the way.
Anyways, hope that helps.
distantneighbor said:
good luck on finding tempered glass that doesn't have one of many issues.
I tried a number and all failed, so I went with the old flexible film protection. easy to put on, protects the screen from scratches etc, and entire thing sticks very well. it comes already shaped as the screen as they are the official Samsung screen protection and you can get them here: https://www.amazon.com/gp/product/B06XDJ6CT2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I was REALLY REALLY regretting buying this phone until I found this. You get 2 of them for that price by the way.
Anyways, hope that helps.
Click to expand...
Click to collapse
Are these case friendly? I had a nice film one on was perfect I snapped my uag plasma case on and the film lifted from all corners... so disappointed lol...
Thanks
-Corey
Sent from my SM-G955U using Tapatalk
sanjsrik said:
*sigh* my mother always said never argue with idiots, they'll drag you down to their level and beat you with experience. So many threads, so many of the same repeated questions, so much noise.
Click to expand...
Click to collapse
Yes, the answer is there really is none (except for Whitestone, which is $50). Thanks for wasting both of our time with your childish and useless response in the first place. Pot, meet kettle! Although that'll probably go over your simpleton head
distantneighbor said:
good luck on finding tempered glass that doesn't have one of many issues.
I tried a number and all failed, so I went with the old flexible film protection. easy to put on, protects the screen from scratches etc, and entire thing sticks very well. it comes already shaped as the screen as they are the official Samsung screen protection and you can get them here: https://www.amazon.com/gp/product/B06XDJ6CT2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I was REALLY REALLY regretting buying this phone until I found this. You get 2 of them for that price by the way.
Anyways, hope that helps.
Click to expand...
Click to collapse
I rlyyyy prefer the tempered glass one. I do have insurance (cracked screen= $150 to fix), but I'd rather not have to use that. Tempered glass screen protectors have saved my ass countless times in the past with previous phones, and from what I've read, this one is even more fragile than past phones. So IMO, film is not the way to go unfortunately.
JoeFCaputo113 said:
I rlyyyy prefer the tempered glass one. I do have insurance (cracked screen= $150 to fix), but I'd rather not have to use that. Tempered glass screen protectors have saved my ass countless times in the past with previous phones, and from what I've read, this one is even more fragile than past phones. So IMO, film is not the way to go unfortunately.
Click to expand...
Click to collapse
Found this and ordered it. Good review. I'll report back once they come in.
This one has me really interested and is new.
https://youtu.be/BeIEnYJRkZQ
I don't know how to post inteegrated YouTube videos like above, sorry.
It's still only edge adhesive however he says it's fairly strong and hadn't come off in a week of use and he's going to report back again after a month. Also he says it doesn't effect screen sensitivity what so ever.
The edge adhesive worries me still, also they misspelled "friendly" on the box. I wish it was on Amazon to see reviews since their site has no review section. Product link is in his drop down info or whatever you call it on YouTube.
coreyoli said:
Are these case friendly? I had a nice film one on was perfect I snapped my uag plasma case on and the film lifted from all corners... so disappointed lol...
Thanks
-Corey
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
It is case-friendly for me, works great with the case I am using (which is found here: http://www.ebay.com/itm/Hard-Case-for-Samsung-Galaxy-S8-S8-Plus-Shockproof-Kids-Protective-Back-Cover/263003430183?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649)
hope that helps.
---------- Post added at 04:52 AM ---------- Previous post was at 04:49 AM ----------
JoeFCaputo113 said:
I rlyyyy prefer the tempered glass one. I do have insurance (cracked screen= $150 to fix), but I'd rather not have to use that. Tempered glass screen protectors have saved my ass countless times in the past with previous phones, and from what I've read, this one is even more fragile than past phones. So IMO, film is not the way to go unfortunately.
Click to expand...
Click to collapse
not sure why you think tempered glass is going to protect your screen against breaks anymore than film considering it is the case you use that would determine that. the rear glass is fragile, but the front glass is actually not
do your research from users who actually tried many of the glass protectors. like I said, if it wasnt for the film protection I have now, I would be looking at other phones and take the loss.
Exactly. Screen protectors help with scratches, but NOT breaks.
That is complete fake science, and anyone that says they help with shatters is just wrong.
If you've had your tempered glass screen protector break, but not your screen, it is simply because the screen protector is much thinner. Your screen would not have broken without the screen protector on that same drop either...
Sent from my SM-G955U using Tapatalk
JasonJoel said:
Exactly. Screen protectors help with scratches, but NOT breaks.
That is complete fake science, and anyone that says they help with shatters is just wrong.
If you've had your tempered glass screen protector break, but not your screen, it is simply because the screen protector is much thinner. Your screen would not have broken without the screen protector on that same drop either...
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
So far I've had 3 screen protectors on my device when I dropped it. The protector shattered, stuck on the device, but the device's screen didn't shatter. So... I'm here to trump your "fake science" with real facts. Screen protectors, at least glass ones for me, worked great to preserve the integrity of the actual glass on the device from spidering and breaking.
Actual conversation I had with some guy who was bragging about how he was so proud that he had his third crapple screen replaced:
Him: I found this really cool place that replaced my screen for $60
Me: I'm just careful
My "three" incidents were with three different devices in over 15 years. I marvel at these people I see on the subway with completely shattered screens. What are people doing that they cannot hold on their devices? Do people do NOT get that these are upwards of $500 devices? It's like not caring that you're driving your car into a brick wall and driving around with a completely smashed front-end of your car.
howellcp said:
Found this and ordered it. Good review. I'll report back once they come in.
Click to expand...
Click to collapse
I've had this for a month or two. I like it, but it is very easily scratched. I had scratches within 10 minutes with busy my switchblade key in the same pocket
Sent from my SM-G955U1 using Tapatalk
I cracked my S8 screen that cost me $200 to fix.
Now I am using Gobukee full adhesive glass already for several months. So far so good.
I need a good tempered glass screen protector
Ounier Full Coverage Bubble-Free Screen Protector as it was one of the first brands to come up when searching for screen protectors for Samsung Galaxy S9. My phone is fairly new and I needed to have it fully protected first before I include it in my busy daily routine. I’m the kind of person who chooses convenience over price, but as this product was recommended by a friend (for his S8), I gave it a chance. Besides, It’s really great that the pack has 2 screen protectors; the easier to change, the better. I’ve also had bad experiences with other screen protectors for my old phones as they sometimes hinder with some of the phone’s features, like the double tap, the sensors, etc. Since my friend can’t recall any troubles at all with this protector, this eased my mind a bit with what it had to offer.
I’ve always admired how my friend’s phone looked so seamless and smooth, it always fooled me thinking that his screen protector came with the phone when he purchased it. To my surprise, he installed it himself. Now I’m not a bad friend, but this guy can get excruciatingly stupid at times. I thought if someone as dense as him had managed to somehow not mess up with wet installation, how hard can it be?
I got the screen protectors, a squeegee, a tiny piece of cloth, a manual, and a small bottle spray solution. I’m the old-fashioned type, I never even knew that “wet installation” is actually a thing if not for my buddy. All these items looked so weird to me. I’ll never understand how people come up with this stuff but if it works, then it's fine with me.
Whitestone dome is the best one I've used. It saved my screen countless times before it finally broke. Worked well with all my cases.
Was looking to see if anything newer has been released bit I guess not.
Hello all,
I'm looking for the best tempered glass screen protector for Pixel 2. I have looked through the List of Google Pixel 2 Screen Protectors and I have searched Amazon too, but the reviews are either fake-5-star-reviews, or generally poor reviews.
Can anyone recommend the best option for a Pixel 2 tempered glass screen protector?
Thank you
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Spigen, take your time as it fits perfectly side to side on the visual part of the screen only.
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
munchy_cool said:
I have this one and it's the best IMHO and is case friendly. I can attach some pics for you tomorrow.
https://amzn.to/2Psxbes
Click to expand...
Click to collapse
is it full adhesive and curved on the edge?
koax88 said:
is it full adhesive and curved on the edge?
Click to expand...
Click to collapse
nopes
If you are looking for the best, whitestone dome is probably the way to go. It is expensive though. If you aren't worried about full adhesive and curved so it passes the edge of the display there are a lot more options. Spiegen is good for a lower cost option, but it only goes to the edge of the display and doesn't curve.
Thank you for all the suggestions. I'll definitely use one of these screen protectors
ElaineM said:
Thank you for all the suggestions. I'll definitely use one of these screen protectors
Click to expand...
Click to collapse
avoid those on ebay for under $3 or aliexpress. you'll just waste your time
Keithn said:
whitestone dome .
Click to expand...
Click to collapse
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
boondiordna said:
Quick question: do you (or does anyone on the forum) have one of these and can tell me if I can use it in combination with Google's fabric case?
(Also, I am currently in Germany. I can order one, but the translated text on the Amazon listing sounds like a scam. It also claims to "take away blue light". I want my display as intended, not blue-filtered.
FTR, I've been trying to get the "official" SP (Power Support) from the Google store, buy it isn't available in Germany.
Click to expand...
Click to collapse
I'm currently using one. I think it would fit the Google case, but I haven't tried. I've used it with an OtterBox symmetry, a speigen tpu, and with the moment case with no issues. It covers the full display but still leaves gaps on the edges.
I haven't noticed any significant blue light filtering but I did see that the description stated that. I can try to compare it against another Pixel 2 with a different screen protector and see.
Thanks, that would be nice of you if you could have a look at a second Pixel 2.
FTR, I turned off colour boosting, and really appreciate the near-natural colour provided by Google's OLED settings. I couldn't understand why people complained about the "faded" colours in the beginning. I bought this thing as a camera with a phone, and I want to see my photos as close to what I see while shooting them. Filtering blue light is a bit of a deal-breaker for the glass dome, if perceivable.
I've had 2 Whitestone Dome Glass protectors. The first had to be replaced when my phone slipped through the gap in my pull out couch and when trying to get out it slipped under one of the couch legs, crushing the screen (no screen protector will help in that case). The second came in today, after some back and forth with Whitedome trying to figure out why it was showing out of stock on Amazon, and I had to trash it less than an hour after opening it.
The first one was a hassle to install but once installed I really, really liked it. The second had a broken bottom piece for installation, causing an imbalance in the phone and I went through 3 (one left over from first install) adhesion tubes before I realized that was why a good bit was slipping over the edge of the phone and not across the display. When I realized what was going on I was kind of angry it even happened, wasn't paying much attention, and the protector cracked when I was removing it to try and clean up everything...
I either got lucky with the first or REALLY unlucky with the second, but either way I'm not buying another one. The installation process isn't exceedingly difficult, but it's just way too cumbersome for what it should be, costs too much, and just isn't worth the headache. Really disappointed in it. Luckily Amazon did me a solid and is letting me refund it.
That first was by far the best I found for TGSP's for the Pixel 2. I'm really hoping the Pixel 3 goes back to fully flat glass, not this "it's curved just enough at the edges to make it extra difficult for third parties to make screen protectors" crap.
Follow-up: I tried it and it works with the fabric case, there is stilla gap. @jppowers is right about the installation process, it is a buggerance. I had an air bubble, glue spilled under the protective sticker on the speaker and it was generally cumbersome.
There is some blue light filtering, which makes sense given that the glue is near-UV-polymerised, but my brain compensates this and I don't see it if not in direct comparison with a screen without the protector.
100kaa said:
Ia am using This glass and it's my third glas right now. 2 times saved my display.
It fits perfect, it is curved.
Click to expand...
Click to collapse
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
bbdcbb said:
Hello,
Does this screen protector actually curves around the 2.5d edge of Pixel 2 or is it just that the edges are sloping to give a smoother feel when finger meets the edge of scren protector, but the actual contact surface side of scren proterctor is flat? Would be awesome if you could share close up pictures of this protector on your phone. I am wondering if this screen protector actually creates no ugly halo effect around the preimeter when applied?
Click to expand...
Click to collapse
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
100kaa said:
Hi, I took few photos, it seems nice.. just to much of dust found way under the protector
Click to expand...
Click to collapse
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
bbdcbb said:
Thank you this one looks interesting, tempted to buy one myself, but maybe you have idea why there is significant amount of dust stuck? Is protector not full adhesive? Could it be that due to contouring it is unable to stick to whole screen surface properly? Misapplied or high-dust environment?
Click to expand...
Click to collapse
Hey, I don't really know what could be the problem. At the beginning everything was OK, but later problem with dust appeared. I am in normal surroundings, with no extra dust. Office-house.
I bought, as reserve, from same guy foil protection also. Maybe it will be better.
When a screen protector only has glue on the edges the dust enters at the speaker openings. I'm still using my original Spigen Glass protector with zero dust since it adheres to the whole screen but doesn't cover the curved sides, the pack comes with 2 protectors and I will swap it out soon as the fingerprint resistance isn't the best anymore(but it's been almost a year).
Whitestone's Dome is definitely the best by far, but just as everyone else has mentioned, the installation process is a massive hemorrhoid. For what they charge they oughta include a professional in-home installation service.
I highly suggest to anyone who gets the Dome, set aside 2 hours, watch the videos online, prep your area, and be extremely patient. Also, make sure you've eaten and haven't had anything that will make you jittery or anxious like coffee, it will make the whole process much easier to handle and you'll be much less likely to fly into a rage if you run into issues.
Also, as mentioned by others, be sure to fully inspect your glass before you attempt to install it. There is a very thin film on the back of the glass to keep it from splintering in the event of a shatter, and sometimes they end up with bubbles between the glass and film during manufacturing. I went through both tubes of adhesive and a lot of frustration before I realized the bubble was not a personal application error but a flaw in the glass. Getting a replacement was no issue, but I still lost two hours and grumbled quite a few choice words.
Caveats aside, it's a superb full coverage TGSP.