Related
!!This is ONLY for Elocity A7 PLUS! (model with 1024x600 resolution)
This Mod is based on Elocity Stock with additions from Nvidia SDK, to make a better functioning stock rom with google apps.
You can also follow updates on my homepage at Dexter's mods
Installation Instructions:
ALWAYS HAVE CHARGER CONNECTED WHEN UPDATING A FIRMWARE
You can download from here MD5SUM: 7d69789e85e946c7f456c8f8f455a352
It will require Wipe/factory reset as well. as reports on the update seems to report some problems if not, so its your ownproblem if it does FC alot, if you do not wipe
Install using recovery menu.
copy the file to the root of your sdcard and rename to Update.zip.
Enter "Recovery menu" by pressing power for 2seconds, release
then hold power button until "hold power 5sec...." appear and wait until it says booting recovery kernel..and release power button.
Press "HOME" button to see menu, use SEARCH/BACK button to navigate.
select "Wipe/factory reset" - press MENU key to activate
then select "apply sdcard:update.zip" - press MENU to activate
after the small install process - press "reboot" to finalize and wait for the upgrade to take place on second screen that appear.
ISSUES
- Screen brightness cannot change (Settings crash when selected)
- Volume in status bar not included (using old A7 mod here, ill figure a solution out, maybe app from Market?)
KERNEL USED IS STOCK ROM EDITION, SINCE SOURCE IS NOT RELEASED
CHANGELOG
v1.00
- Initial release
- includes a fixed RECOVERY , which allow you to do a proper WIPE (Factory reset)
- DSP audio manager
- rotation fix for some games
- all google apps functionality with calendar and email and sync
- flash player 10.3 included (full embedded media support) , if you want to upgrade, please uninstall the old one first.
- still no "move 2 sdcard" (needs different release 2.3.6 to support it and new kernel)
- no longer uses /storage as sdcard location.
/mnt/sdcard is now internal storage,
AND
/mnt/sdcard/sdcard-disk is external sdcard location.- root enabled (Superuser is used here)
- wma/wmv media support
THANKS to all who donated previously and up to now! its appreciated, and shows that people like the extras added...
WARNING: Use this image at your own risk and i take no responsibility if you brick your tablet..
PS: you can ALWAYS use the elocity Recovery from A7 install instructions here
If you like it press "THANKS"
reserved for future.
Bro plzz check ur pm box
Need ur help Dexter...
hey dexter need ur help...... ive tried porting sense 3.5 to defy......when i went in the port section in kitchen.........i setup the port and i got 2 folders MY KERNEL,MY DEVICE FOLDER....i am porting it on defy...i changed the folder MY DEVICE FOLDER to "WORKING_sense" and then set up a working folder and then built up the rom but it didnt work out...i got an error
E:error status 6...wat shud i do..plzz help
hey bud my usb does not work on this mod also is there a honeycomb for the plus version
gemini002 said:
hey bud my usb does not work on this mod also is there a honeycomb for the plus version
Click to expand...
Click to collapse
usb stick works fine here? and shows in "storage" when mounted.b
Dexter_nlb said:
usb stick works fine here? and shows in "storage" when mounted.b
Click to expand...
Click to collapse
weird soulution then?i tried to flash again but same thinh..maybe i will put orginal sofware then update again
gemini002 said:
weird soulution then?i tried to flash again but same thinh..maybe i will put orginal sofware then update again
Click to expand...
Click to collapse
did you note, mount location changed from original rom?`its no longer in /mnt/storage but /mnt/sdcard like other tablets.
when i plug it in its not detected does not light up..i flashed orginal software and port works
---------- Post added at 09:04 PM ---------- Previous post was at 08:45 PM ----------
when i install ur rom @ first boot i get boot loop so i have to turn off then it boots but no working usb port so frustrated
---------- Post added at 09:42 PM ---------- Previous post was at 09:04 PM ----------
Dexter_nlb said:
did you note, mount location changed from original rom?`its no longer in /mnt/storage but /mnt/sdcard like other tablets.
Click to expand...
Click to collapse
yes usb is not bein mounted at all
The latest fw was on my tablet also on orginal fw in recovery when I choose factory reset it just shuts of ..
Sent from my HTC EVO 3D X515m using XDA App
gemini002 said:
The latest fw was on my tablet also on orginal fw in recovery when I choose factory reset it just shuts of ..
Click to expand...
Click to collapse
you need to install my version, and then go back into recovery and you see recovery name is changed, and now factory reset would work fine.
yes works fine now ..sometimes sceen turns off and wont turn back on reboot needed also when will update to this come out wnt to move apps 2 sd
gemini002 said:
yes works fine now ..sometimes sceen turns off and wont turn back on reboot needed also when will update to this come out wnt to move apps 2 sd
Click to expand...
Click to collapse
the SOD issue was a well known problem of Tegra2 in its early days. problem with this tablet is that it needs a new kernel update and i do not see that one coming to solve SOD problems (from the past).
strangely the first A7 did not have it,while my Folio100 suffered badly from SOD with the early kernels.
so its known, but not being fixed i guess.
actually Nvidia wrote on their webpage that this hardware had the problem on some tablet could be awakened again by pushing out the sdcard? maybe an idea?
u have made this tablet a rel steal for me now only paid 120 cdn for it...now how can we get tablet to install to sd card?
gemini002 said:
u have made this tablet a rel steal for me now only paid 120 cdn for it...now how can we get tablet to install to sd card?
Click to expand...
Click to collapse
we need a kernel, the function required for installing to sdcard (loopback device) is not compiled into the kernel. so its not working for any rom.
i made CM7 + HC3.0(from A7Comb) working, but without the function from the kernel, those are not worth using. so im holding back those for a release until a solution is found.
Dexter_nlb said:
we need a kernel, the function required for installing to sdcard (loopback device) is not compiled into the kernel. so its not working for any rom.
i made CM7 + HC3.0(from A7Comb) working, but without the function from the kernel, those are not worth using. so im holding back those for a release until a solution is found.
Click to expand...
Click to collapse
Does it have more internal memory free??would love to try it ..also how dani increase my internal memory
gemini002 said:
Does it have more internal memory free??would love to try it ..also how dani increase my internal memory
Click to expand...
Click to collapse
you can find the CyanogenModPlus edition now using link in post to download.
its beta but until a kernel is ready, we have to live with minors. as its work quite well.
remember to have embedded video working, install the CF3D plugin from Market (ChainFire 3d) and reboot, and you can see embedded video quite fine on cyanogenmod too.
Hey Dexter_nlb,
This seems to be the best rom available for this tablet - its more stable then the stock roms and offers some improvements and speed overall making it the best so far.
I just have one problem with it that you might be able to help out with:
I have just noticed that your ROM is missing the ability to change the WIFI Sleep Policy. Its set for ON by default - but cannot be turned off. This is a big problem as WIFI disconnects every time the screen turns off. It then takes over 30sec to re-connect (depending on wifi network) and any programs open that require a connection stop responding or start to force close.
I use my Tablet as a controller for my home theater and because of this I cant use this great rom. I cant use the stock rom either as The stock rom does not work with my home theater apps.
I was wondering if you could fix this easily or could show me how - EG: Build.prop string??? or other mod? - port settings.apk or wifi related libs from std rom?
I just need the WIFI to stay on.
Thanks in advance.
JF
JF-GINO said:
This seems to be the best rom available for this tablet - its more stable then the stock roms and offers some improvements and speed overall making it the best so far.
Click to expand...
Click to collapse
i would dare say its the only one for A7+ now
activity has changed alot since all the new android tabs got out.
JF-GINO said:
I just have one problem with it that you might be able to help out with:
I have just noticed that your ROM is missing the ability to change the WIFI Sleep Policy. Its set for ON by default - but cannot be turned off. This is a big problem as WIFI disconnects every time the screen turns off. It then takes over 30sec to re-connect (depending on wifi network) and any programs open that require a connection stop responding or start to force close.
I use my Tablet as a controller for my home theater and because of this I cant use this great rom. I cant use the stock rom either as The stock rom does not work with my home theater apps.
I was wondering if you could fix this easily or could show me how - EG: Build.prop string??? or other mod? - port settings.apk or wifi related libs from std rom?
I just need the WIFI to stay on.
Click to expand...
Click to collapse
you might be able to download an app from Market that solves it?
Advanced WIFI LOCK (Free edition)
it might help.
otherwise only way around is going into Development settings, and chose "stay awake"?
anyways, the wifi issue is more common being a kernel issue, which in the early nvidia for these tablets had a deep sleep issue, which also killed wifi signal. its only solved by a full kernel upgrade to android 3.x (2.6.36.x or higher) which i have no good chance of doing completely.
to get better support, the CyanogenModPlus rom is getting better now, since kernel is changing with OC support and better market install support as well.
but thats probably the best this can offer for now.
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Edit:
Rooting this device has been made possible by GT35pro. See posts below.
same problem
KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad
CWM installed and rooted the HDC galaxy note 2 MAGE / MEGA
rebmoe said:
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad
Click to expand...
Click to collapse
I just created the cwm recovery and root. The link is on my blog. The zip file is password protected so be sure to get it from my blog page.
http://gt35pro-mobile-gadgets.blogspot.sg/2013/02/cmw-recovery-english-and-root-for-hdc.html
After you have clockwork mod recovery, use it to flash the root access into the phone.
Have fun!
KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.
londonflu said:
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.
Click to expand...
Click to collapse
The one I got did not have that screen calibration problem. Everything works good. Anyway, root is available now.
Superb!
Thank you for sorting this out!
-KristN91
Extra Guide
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!
S_ft_need_download_all_fail (4050)
I'm trying for several days, but always get this error in the flash tool: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Tried on Windows 7 x64, Windows 7 x32 and Windows XP SP3 (x32). Only on the Windows XP computer I was able to make a backup with Flash Tool using the Read Back option.
When I try to flash the red bar goes to 100% then the error message shows...
Does anyone get this error aswell, and did someone manage to solve this?
Please help, I'm in desperate need for root because I need touch screen calibration.
Thnx!!
YES! SUCCES!! I managed to root my HDC Mage :laugh: Did use another method though, check http://forum.xda-developers.com/showthread.php?t=2160490 if you are interested.
Anyway, now back to calibrating the touchscreen. What tools are good do fix touchscreen issues? I already tried http://forum.xda-developers.com/showthread.php?t=934500, but I still am not satisfied.
Thnx :good:
Just curious, if anyone that owns an HDC, is actually located in the USA?
londonflu said:
Just curious, if anyone that owns an HDC, is actually located in the USA?
Click to expand...
Click to collapse
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app
jg77 said:
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Because I tried to order 5 different phones from China including Fastcardtech; they couldn't ship for some reason; even got an empty box from ZOPO mobile. I ended up buying the BLU here in the US, I'm kind of glad it happened, since now I have an N'vidia Tegra 4 CPU, that runs circles around the dual-core phones.
I did order one more phone on ebay from China, been waiting for 2 weeks now. MAKES ME WONDER IF THEY EVEN ACTUALLY SHIP TO THE US AT ALL?
Thank to Paypal I was able to get refunded everytime.
KristN91 said:
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!
Click to expand...
Click to collapse
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
thank you
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app
jg77 said:
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.
farazafs said:
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.
Click to expand...
Click to collapse
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.
jg77 said:
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.
Click to expand...
Click to collapse
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.
farazafs said:
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.
Click to expand...
Click to collapse
There is something wrong in the layout of the scatterfile. Can you post the logiles of sp flash tool? Just zip them all together.
I have had the exactly the same error with my HDC Mage. I just had to rename a small section of the scatterfile and then it was all good.
hi,
After spending many time trying to root my storex tab 901 I bought in france (Already installed on 4.1.1 with google play), Iwas finnaly able to root it using adb and command line.
to do so:
- Download attached file
- Download from google SDK usb_adb_driver
- Go to your device parameters-> USB -> enable debbuging mode
- create a c:\root folder on your windows XP computer then Extract the zip file attached into it.
- Plugin your device to the computer, when prompted for driver, use google sdk USB_ADB_Driver
- When done, open a windows terminal command line
- type: c:
- type: cd \
- type: cd root
- type: cd rootkit
- type: go.cmd
If everything goes well, your tablet should reboot. you can try installing the free app from google store called "Root checker" to confirm your device is properly rooted.
Also, if you lost the original rom and live suite, here is the link to download the latest build from storex web site:
(I will post the link later when I find it)
JB 4.2.2
CAUTION: USE THIS ROM AS YOUR OWN RISK.......Be sure you have the official rom in case it is not working for you. It appears that even though you have the same tablet Reference, depending on when you buy it, hardware might be a bit different and most likely you will take the risk of having a unusable Touch screen or wifi...
I found out you can fully use your Ezee Tab 901 4.2.2
you can install rom from Manta MID 13.
You will be able to install the rom using Livesuite.
Gain:
- Android 4.2.2
- Root Access out of the box
- Play store installed.
Everything will be working
For the link type in google:
MID13 Android 4.2.2 Jelly Bean - Manta Multimedia Info
select google link called: manta.info.pl
select the link catshare or 4shared.
Start live suite 1.7, select the download img file, do a format when prompted. You done.
When the tablet restart, go to the parameter icon, and change language to French or english
Procedure on the Ezee tab 901 with livesuit:
- completly turn off the tablet, unplug cable
- start livesuite and select the downloaded image file
- keep the VOL- button pressed and plug the usb cable
- without releasing the VOL- button press the Power button 6 times.
- You should hear windows sound saying a USB device has been plugged
- if windows request it, install the driver from Livesuitefolder\usbdriver
- Livesuite should automatically start the flashing process.
- when prompted, "Format device" press YEs.
- When it s 100% you tablet should reboot.
Done.
Note: I did not invent anything, thanks to the good work of MANTA team members. I just found out this rom works on my tablet out of the box.
Hi,
Thanks for sharing these tips. I'm gonna try to update to 4.2.2, hoping this is going to fix some problems with this tablet.
I've been looking a lot for information about how to update ezee tab 901, so you did definitely a great work !
edit : iflash went well, but touch screen is not responding anymore. Any idea of how to solve it ?
Thanks.
samus64 said:
Hi,
Thanks for sharing these tips. I'm gonna try to update to 4.2.2, hoping this is going to fix some problems with this tablet.
I've been looking a lot for information about how to update ezee tab 901, so you did definitely a great work !
edit : iflash went well, but touch screen is not responding anymore. Any idea of how to solve it ?
Thanks.
Click to expand...
Click to collapse
Hi,
did you try going into recovery mode and factory reset? (shutdown tabel completely and keep press on volume+key then press power button)
in the menu, using vol+/- scroll down to wipe factory reset and validate by pressing the power key.
Let me know how it goes.
btw, are you sure your tablet is a Ezee tab 901 and not 971?
Cheers
Hi,
Yes I've got 901 and not 971 (written on the back of the device). I tried factory reset , but still the same problem. However, I flashed again with the original rom, and then touch screen went functional again but the wifi switch is kinda "broken" : it's impossible to turn on wifi from the Settings menu.
I returned the tablet where I bought it, seems there's a sort of material problem with it :/
samus64 said:
Hi,
Yes I've got 901 and not 971 (written on the back of the device). I tried factory reset , but still the same problem. However, I flashed again with the original rom, and then touch screen went functional again but the wifi switch is kinda "broken" : it's impossible to turn on wifi from the Settings menu.
I returned the tablet where I bought it, seems there's a sort of material problem with it :/
Click to expand...
Click to collapse
Im sorry to hear that, i dont think something is broken, i had the same issue with a memup tablet, even though it was a same reference, some model had different hardware, sonlike you after testing multiple rom i had only touch s creen and no wifi ( wifi switch went back to off when i tried to turn it on) or on other rom, i had working wifi but no touch screen.
I hope they will replace your device...
Cheers
pierrottls31 said:
Im sorry to hear that, i dont think something is broken, i had the same issue with a memup tablet, even though it was a same reference, some model had different hardware, sonlike you after testing multiple rom i had only touch s creen and no wifi ( wifi switch went back to off when i tried to turn it on) or on other rom, i had working wifi but no touch screen.
I hope they will replace your device...
Cheers
Click to expand...
Click to collapse
Yep the wifi switch is exactly what i've got on this storex. Thanks for your help anyway. Ho and by the way, I properly rooted it with you first tuto
Cheers.
Fast custom ROM 4.2.2 by TOxico for Ezee tab 901
Guys,
I manage to find a very fast and usable rom for our tablet: (THanks to Toxico.) this rom will change your life.
All information and download are in the thread here:
http://forum.xda-developers.com/show...php?p=42274265
It should basically work on any A13 device with livesuit (tested on my Ezee tab 901 and on my 704CET mem up)
This rom comes with no TS driver, but there is all explanation and download to install the needed driver.
note: you might loose the camera though. I encourage you to read the full thread before going further and flash your tablet.
If you want to know the driver used on your tablet, run a adb shell and type lsmod (You will have a list of loaded/used driver.)
Dont be scared, everything is written in the toxico's thread
My only advice, if you dont know how to use adb, do not try it, this is not that easy.
I hope this will help.
Best regards.
As usual do it at your own risk and even more: make sure you have the original rom... just in case
Tutorial for 971.
Hi there,
Does anyone know a tutorial like this one but for the 971??
My brother-in-law wasn't using is so I'm thinking in tweaking it to see how it gets.
MaedaKeiji said:
Hi there,
Does anyone know a tutorial like this one but for the 971??
My brother-in-law wasn't using is so I'm thinking in tweaking it to see how it gets.
Click to expand...
Click to collapse
Hi, sorry i cant help you, it looks like the 971 is using a10 cpu, sôit can be different.
If you know what you are doing, u can try to backup your original firmware and test the solution i have provided from toxico in py post above. But there is no warranty it s going to work.
Any case, donnot forget google is your friend
Good luck
Unfornetly it seems google doens't like this tablet...
I'll see what I can do with some backups and all.
Thanks anyway!
Hi all!
i wrote reviews for two devices that are very interesting on checking together.
iPega 9023 rev2 -> Telescopic bluetooth controller for smartphones/phablets/tablets and standalone usage.
Teclast X89
There is a summary of the Teclast X89 Device. (sorry, but i can´t post complete article here, due the limitations of the characters by message on this forum)
_______________________________________________________________________________
[REVIEW] Teclast X89 Baytrail Tablet Dual OS (Windows & Android)
Acknowledgments
To Geekbuyingstore for send me a sample of their product Teclast X89 to test it and write this review.
Note about this review
This article is the first part of the main review of the device. Currently i get bricked the device when trying to update/install a clean windows version, and i can´t keep testing for now, until i found the way to recover it
When i get the device unbricked (if i get this), i will post a second part with steps for recovery, firmware update, tips and tricks for this device.
This article is based on general usage of the device, and for windows get many videos of games running directly on the device itself, for showing what you can expect of this.
For technical info and benchmarking on windows, when i get this device operative again, i will update this article with these sections.
Apologize if the article is not enough informative as you can expect. I'll do my best to bring a second part with more info about this device.
Product showcase(Checking of the external view of the package)
First of all, i never mention about packaging of the store that sent to me their articles, because usually i don´t consider interesting to mention, but this time i will do an exception because i get so pleased about this point.
For this review, Geekbuying sent to me two devices (but i wrote in different articles) that correspond to a suggested (by me) combo for use together:
Tablet Teclast X89
iPega 9023 controller
Both of them come in the same package, but fully protected, first with the typical plastic with bubbles, covering all the content:
Then, there is a bag with protective system for avoiding shocking of the devices.
The package arrives without any kind of problems, with the original packaging of the devices in perfect condition.
I wanted to remark this because is not usual that stores give this attention on the devices they send.
Now, back to the device itself. the packaging of it is simple, but all main texts are in chinese.
In the front we found the name of the product (Teclast tPad), and the Intel logo, that give to us a main clue about what is inside.
Back part is the description of the product in chinese
Note that there is no info about the specific model of the tablet (Teclast X89)
Inside we found the basic distribution of the package
Product information
According with the manufacturer, or searching info on web pages, we can found many sources of information about the device and sometimes these information may be not consistent (may be different from one web page to other), and this may cause some confusion for anybody that wants to get info about this product.
On this section i will post the info i get from the manufacturer (or is not possible, the web page that i consider more reliable), listing only the relevant points for a tech analysis of the product, and omit these points that don´t get any relevant info about the device (as many time we found on many pages, things such video capabilities, mail capabilities, etc, that really are software based features that we can install on the device, and not a real feature of the device itself)
I did not found the official specs on Teclast webpage. There is the specs of the previous version (X89HD), but not for this specific device (Teclast X89, or Teclast X89 Retina Display)
Operating System: Android 4.4 & Windows 8.1 OS (Dual Boot)
Model: Teclast X89 Dual OS
Announced: 2014-07
Color: White
Shell Material: Plastic
Display
Size: 7.9 Inch
Resolution: 2048*1536
Display Technology: IPS Retina capacitive touch screen
CPU&GPU
CPU Manufacturer: Intel
CPU Model: Bay Trail-T Z3735F
CPU Core: Quad Core
CPU Speed: 1.83GHz
RAM&ROM
RAM Type: DDR3L
RAM: 2GB
Hard Drive Type: eMMC
Hard Drive Capacity: 32GB
Extend Card: T-FLASH(Support 32G MAX)
Other Functions
Camera
Front: 2.0MP
Back: 5.0MP (Autofocus)
HDMI: Up to 1080p
3G: Supporting external 3G modem
Bluetooth: 4.0
GPS: NO
G-Sensor: Four way
Power
Battery Type: Li-ion battery, 5000mAh
Battery / Run Time(up to)
Wifi On: 4 hours
Wifi Off: 8 hours
Power Device Type: AC Adapter, AC 100-240V
Charging Voltage: DC 5V, 2A
Communications
Wireless ConnectionWIFI
Wireless Protocol802.11 b/g/n
Dimensions200 ×138 ×7.4mm
Net Weight512g
Connectors Ports
1 x Micro USB Port
1 x Earphone jack
1 x Micro HDMI port
1 x Micro SD Card slot
Hope you found interesting and useful.
_______________________________________________________________________________
Zalu2!
Not booting to windows after root
Hi,
I was reading your review about teclast x89, it is awesome.
I was following your instruction for rooting my dual boot teclast x89 (E7ED), and everything went great, i was rooted.
But then my problem apear, i can't boot into windows. Menu for selecting which OS to boot, dissapear. I try every single combination of key, but everytime it boots to Android. CAN YOU PLEASE HEEEEELP ME?
Thanks
djshorty said:
Hi,
I was reading your review about teclast x89, it is awesome.
I was following your instruction for rooting my dual boot teclast x89 (E7ED), and everything went great, i was rooted.
But then my problem apear, i can't boot into windows. Menu for selecting which OS to boot, dissapear. I try every single combination of key, but everytime it boots to Android. CAN YOU PLEASE HEEEEELP ME?
Thanks
Click to expand...
Click to collapse
Hi.
The rooting method will not affect to booting selectiong of OS.
of select, power on the device, and after release the power button, press VOL- & VOL+ at the same time.
the device will ask you to select an Operating System.
another way is connect any USB keyboard (via USB OTG cable), and when turning on the device hit quickly and repeat the "supr" key, for entering to BIOS.
once you get on BIOS interface, go to second screen and select "OS Selection" (or something this way, sorry i can´t check now) as first booting method.
This will enable the OS selection screen
check my review (on my blog) and follow the instructions for configuring the bios for select OS, and add more time for pressing Supr (by default is 1 or 2 seconds, i don´t remember. i suggest 4 or 6 seconds)
Greetings!
Deen0X said:
Hi.
The rooting method will not affect to booting selectiong of OS.
of select, power on the device, and after release the power button, press VOL- & VOL+ at the same time.
the device will ask you to select an Operating System.
another way is connect any USB keyboard (via USB OTG cable), and when turning on the device hit quickly and repeat the "supr" key, for entering to BIOS.
once you get on BIOS interface, go to second screen and select "OS Selection" (or something this way, sorry i can´t check now) as first booting method.
This will enable the OS selection screen
check my review (on my blog) and follow the instructions for configuring the bios for select OS, and add more time for pressing Supr (by default is 1 or 2 seconds, i don´t remember. i suggest 4 or 6 seconds)
Greetings!
Click to expand...
Click to collapse
thanks for the reply,
i try both of your method but no luck,
First, i select power on the device, and after release the power button, press VOL- & VOL+ at the same time. It goes in "dmx" fastboot mode,
Second,
When i enter in bios (supr-del key), in boot manu i have 3 options:
1. UEFI OS (it boots directly to android)
2. Windows boot manager (it boots directly to win)
3. UEFI: built in EFI shell( it opens shell)
can you please check in your tablet what option you have at boot manu?, are they same with mine, what did you select?
What ever i try, i can only boot to android or windows, i cant get screen where i can choose what os to start. Before it was screen this screen
with Operating System selection, but now is gone..
please help!!
p.s in windows now, touch is not working, android is ok.
Thanks
djshorty said:
thanks for the reply,
i try both of your method but no luck,
First, i select power on the device, and after release the power button, press VOL- & VOL+ at the same time. It goes in "dmx" fastboot mode,
Second,
When i enter in bios (supr-del key), in boot manu i have 3 options:
1. UEFI OS (it boots directly to android)
2. Windows boot manager (it boots directly to win)
3. UEFI: built in EFI shell( it opens shell)
can you please check in your tablet what option you have at boot manu?, are they same with mine, what did you select?
What ever i try, i can only boot to android or windows, i cant get screen where i can choose what os to start. Before it was screen this screen
with Operating System selection, but now is gone..
please help!!
p.s in windows now, touch is not working, android is ok.
Thanks
Click to expand...
Click to collapse
If you has been removed this View attachment 3193425
TRY IT →bbs.teclast.com/forum.php?mod=viewthread&tid=389148
mooncake5874 said:
If you has been removed this View attachment 3193425
TRY IT →bbs.teclast.com/forum.php?mod=viewthread&tid=389148
Click to expand...
Click to collapse
Yes, i removed that Stupid of me
Thanks, i will try this, but i dont know chinese, i try to download and tell you results.Is this apk?or all firmware?
Thanks
djshorty said:
Yes, i removed that Stupid of me
Thanks, i will try this, but i dont know chinese, i try to download and tell you results.Is this apk?or all firmware?
Thanks
Click to expand...
Click to collapse
I made the same mistake:crying:,but I can't find download for this apk at that time. so I reinstall all firmware.
this APK backup. file path“/system/app/”
↓
View attachment VManager.apk
GOOD LUCK!
mooncake5874 said:
I made the same mistake:crying:,but I can't find download for this apk at that time. so I reinstall all firmware.
this APK backup. file path“/system/app/”
↓
View attachment 3193597
GOOD LUCK!
Click to expand...
Click to collapse
Thanks,
i install it but no luck.
Should i open this program and select something, or is it enough thaat i installed it?
ANd it will be very good if someone who knows to make a tutorial in english to flash new firmware from scratch (instaling dual boot, android, windows) like x98, that is good tutorial.
Thanks
djshorty said:
Thanks,
i install it but no luck.
Should i open this program and select something, or is it enough thaat i installed it?
ANd it will be very good if someone who knows to make a tutorial in english to flash new firmware from scratch (instaling dual boot, android, windows) like x98, that is good tutorial.
Thanks
Click to expand...
Click to collapse
Maybe you can use google translation
mooncake5874 said:
Maybe you can use google translation
Click to expand...
Click to collapse
I use google translate, but it is awful, i downlod tutorial pdf file, and translated, but i am afraid that i can make mistake because translation is awful.
If someone who knows chinese and english can translate it right it will be good.
Or someone can confirm that tutorial for x98 3g is the same as this only the files are different, that is also good think to do.
currently, i'm writting a second part of the review, with instructions for flashing the device, installing android and windows (both)
for now, i'm a little bit busy and i can´t give so much time, but let me some days and i will publish this part of the review, for helping flashing the device.
Deen0X said:
currently, i'm writting a second part of the review, with instructions for flashing the device, installing android and windows (both)
for now, i'm a little bit busy and i can´t give so much time, but let me some days and i will publish this part of the review, for helping flashing the device.
Click to expand...
Click to collapse
Thanks for everything i manage to repair my tablet by installing dual boot.
If you need help about your review, i can help just tell me. And as suggestions to your review, you can write what apps are safe to remove, so people cant get into trouble like me. Also you can write how can we install only android or only windows, for big storage 32gb to be used only for 1 system
Thanks everybody.
Hibernat does not work
Hello X89 owners,
i also have the newest dual boot retina display version and i am really impressed by the tablet. All works fine and great performance. Only one thing does not work that worked fine for all my other windows tablets i use before. I am not a big fan of connected standby because it still drains battery, so i use "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" command to hibernate the devices (because default button is not visible).
Unfortunately it does not work with the teclast x89. If i run "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" hibernate command it shuts down the tablet but after reboot it does not restore the hibernate state, it simply boots up normally. I also checked event log having error:
error: Windows failed to resume from hibernate with error status 0xC000000D.
I also tried recreating hiberfil.sys and checking disc consistence. But nothing helped. So can you try this on your devices? I simply want to know if its a general Teclast X89 problem...
Thx and br
Arangato
Hi Arangato.
I'm doing some testings with MeegoPad T01 (similar baytrail than Teclast), and as you i can´t get this thing to hibernate by command line
messing with the device, in some moment i get an effective hibernate state, but i'm not sure how i get.
in some testings, after unplug the power and connect again, the device boot windows (quick than normal) from scratch, and show me the application i get running previous the sleep (burnout paradise)
i will keep doing tests, but i really don´t know how to replicate for now. This messages really is for confirme that there is some way to do a sleep on this device, but of course, is not the standard way.
i'm thinking now... may be when i sleep the device, i think i keep the power button pressed to shutdown... for long time, after this unplug power source, wait few seconds and plug again. (something like this i did, i think)
keep testing...
"powercfg -h on" should enable hibernate mode
But the difference between a cold boot and hibernate resume is not that long
aitnog said:
"powercfg -h on" should enable hibernate mode
But the difference between a cold boot and hibernate resume is not that long
Click to expand...
Click to collapse
i tried but did not enabled.
yeah, may be on timing is the same, but there is a good difference. With Hibernating, when you get back, get all the tasks you're doing in the same status (games, work, etc). i really prefer hibernate than complete turn off for this reason.
but thanks anyway.
i recovered the tablet and doing some testings (but for now i´m centered on other devices i must release reviews).
meanwhile, i published the guide for flashing and recover the device, translating the original in chinese, and adding some other stuff that may be useful.
http://manguiro.blogspot.com/2015/03/guide-teclast-x89-installation-guide.html
Note: if your device cannot recover (like mine) with normal steps, or there is some message about corrupt partition table, invalid disk, etc, you must do some manual steps (the flashing tool can´t handle this)
i will put my steps on other article (really, i need to publish another reviews first), but basically i opened the flashing xml file, and check that there are some commented lines that, if you uncomment, the flashing tool will omit anyway, then you must do these steps manually, from fastboot command.
with this, i be able to 100% recover the device. Now i get android and windows working without problems.
hope you found useful.
Touch has stopped working! In windows.
djshorty said:
Thanks for everything i manage to repair my tablet by installing dual boot.
If you need help about your review, i can help just tell me. And as suggestions to your review, you can write what apps are safe to remove, so people cant get into trouble like me. Also you can write how can we install only android or only windows, for big storage 32gb to be used only for 1 system
Thanks everybody.
Click to expand...
Click to collapse
Hey my touch stopped working in windows too.
Anyone have any idea how to fix it? I have only had this for 1 hour and now it is useless for what I got it for...
I need to find out how to restore the touch capabilities to windows. I tried refreshing, it happened after I went to android for the first time.
I've got the Atom Z3736 Win 8.1 version of this but does anyone know if it's possible to install dual boot because this version uses the Z3735?
Because just about all the forums for this device are in Chinese and using Google translate is a nightmare to even find the right people to ask.
com.android.systemui keeps crashing when charging level at 100%
Hello,
recently I get my Teclast X89 tablet, but unfortunately it appeares to have a problem. When the battery charging level comes to 100% (at 99% everything is OK) tablet becomes totally unusable. When the screen is switched off it cannot be waken up and when I use the tablet a window pops up telling that "Process com.android.systemui has stopped", like here:
imgur.com/hjWI1lP
After restart everything is OK, but it really grinds my gears. Maybe someone know how to fix this problem?
Please halp!
Bogusz
Hello Deen0X, thanks for your reply and explanation. Now i know it seems to be a general problem. If you have a tablet like this connected standby is activated and with this hibernate is also enabled by default (you should find a hiberfil.sys file in C root, its used for fast boot option) so you normally can hibernate with the command i mentioned before: "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" this works fine for my other acer win 8.1 tablet (OOTB system) directly after install. But not for the Teclast x89. Of course having a normal boot and restore from hibernate is pretty same time, also fast boot does not have that big impact. I like hibernate because it "freezes" actual system status without draining battery after that.. i often have several browser windows opened, some other metro apps and i like to resume to that state and not to have a clean boot.
@Deen0X: could you check your event log? Is there also the message that device could not restore from hibernation?
So keep me updated, or maybe anybody else can try the "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" command to hibernate the teclast x89 dual boot. It will not harm the device. I have the experience if hibernation is disabled and you run this command it simply locks the screen..
Thx and br
Arangato
My goal for this thread is to gather as much info for the BLU Life One X2.
There is a similar thread for the older BLU Life One X 2016 but since we have no dedicated forum it was suggested to start a separate thread for the new device.
Specs
Screen: 5.2", 1080 x 1920 pixels, ~424 ppi, Gorilla Glass 3
Memory: 2 GB RAM, 16 GB storage, or 4GB RAM, 64 GB storage, microSD slot (up to 64GB)
Camera: 16 MP, f/2.4, phase detection autofocus, 8 MP front, LED flash front & rear, [email protected] video
Battery:Li-Po 3000 mAh
Chipset: Qualcomm MSM8937 Snapdragon 430
CPU: Octa-core 1.4 GHz Cortex-A53
GPU: Adreno 505
Model: L0091UU
Links & Other General Resources
BLU Products
Amazon
GSMArena
BLU Products Development Team (Google+)
ieatgravity dedicated site for the development of the Blu Life One X2
Similar Phones
Xiaomi Redmi 3s (GSMArena)
Anything you guys want added just let me know.
UPDATE: We now have root on the BLOX2
All credit goes to ieatgravity and mswguitar for this info
WARNING: *I* cannot be held responsible for anything *you* do to *your* phone!
ADB & Fastboot
Before doing most things mentioned below you will need "adb" and "fastboot" installed. Two of your options are to install the Android SDK Tools or the Minimal ADB and Fastboot tool. If you are somewhat new to this I highly recommend the second one. Go here, download the latest version, and install it. When setup is complete you should have an icon for the Minimal ADB and Fastboot tool.
Note: I highly recommend you add "C:\Program Files (x86)\Minimal ADB and Fastboot" to your PATH variable in Windows. This way you can open a Command Prompt anywhere and use adb or fastboot.
Drivers
I recently setup a 5th gen Kindle Fire 7" tablet on my Windows 10 desktop. Because the BLU Life One X 2016 and the Kindle Fire are similar enough it just worked. To use the Amazon drivers you can find them on this page: https://developer.amazon.com/public...etting-up-your-kindle-fire-tablet-for-testing. The direct link is https://s3.amazonaws.com/android-sdk-manager/redist/kindle_fire_usb_driver.zip. Extract the zip file and then run KindleDrivers.exe.
Unlock Bootloader, Install Custom Recovery and Root, and Return to Stock
Note #1: All credit for this guide goes to rogersa2k's post for rooting the BLU Life One X 2016!!! You can check it out here. Most of the stuff was similar enough that I was able to follow it to root my BLOX2 with minor deviations which I've included here.
1) Unlock Bootloader
Power on the phone and skip through all of the setup options
Go to Settings -> About device
Activate "Developer options" by tapping the android version in the settings around 7 times.
Go into "Developer Options", 5th row down you with find the option OEM unlocking. Turn this feature on.
Enable OEM unlocking
Enable USB debugging
Power off your device
Hold down the power + volume up buttons at the same time until you see " boot in recovery" in white text in the upper left corner of the screen and release.
Use the volume key to navigate to Bootloader and select it with the power button.
Your phone will reboot and sit on the Blu bootup animation
Plug the phone in to your PC and authorize it
Open a Command Prompt
Type fastboot devices to verify that your PC sees it correctly
Type fastboot oem unlock
This should output something along the lines of "Your bootloader is already unlocked!"
If this is the case run "fastboot reboot" to return to android
2) Install Custom Recovery & Root
Note #1: We will flash a custom version of TWRP that was built by one of our members
Be sure to have your Bootloader unlocked before proceeding
Download this zip here with everything you will need:
https://drive.google.com/open?id=0B6_iuhJQH7aGTWpSY2haaXl5aU0
Put the SuperSu.zip file on the sdcard
Plug the phone in to your PC and authorize it
Open a Command Prompt to wherever you extracted the .img file
Type adb reboot bootloader
Your phone will reboot and sit on the Blu bootup animation
Type fastboot devices to verify that your PC sees it correctly
Type fastboot flash recovery BLOX2_TWRP_Recovery.img
Type fastboot boot BLOX2_TWRP_Recovery.img
Once booted I strongly urge you to make a nandroid backup
Select Install
Select the SuperSu.zip
Swipe to flash
Reboot when complete
Verify with a root checker or simply type "su" into terminal or an adb shell
Launch SuperSU and configure it as you like
Note: If your phone does not reboot then just hold the power button until it turns off. Hold the power button again until it turns back on.
To get back to stock:
Download this file here: (includes Stock Rom, Drivers and QFIL **Large DL**)
https://drive.google.com/open?id=0B6_iuhJQH7aGU25OMWJNVGdMYkU
Should be set back to stock (unrooted) rom and recovery
Thanks for starting this thread. With the specs/price of this phone, I'm surprised there aren't more people all over this. Would love to have root access on this thing.
Anybody knows how to screenshot on this device
DKStunna108 said:
Anybody knows how to screenshot on this device
Click to expand...
Click to collapse
Hold the power button and volume down button simultaneously for about 2-3 seconds.
mswguitar said:
Hold the power button and volume down button simultaneously for about 2-3 seconds.
Click to expand...
Click to collapse
Thanks. I found out in the gestures. 3 finger swipe down
Hopefully this gets going. Sure wanna see android 7 on this device or at least root an recovery
Is TWRP available ?
Yeah were gonna need sound mods. Has anyone hear the recordings with music its sound so screechy
DKStunna108 said:
Yeah were gonna need sound mods. Has anyone hear the recordings with music its sound so screechy
Click to expand...
Click to collapse
Yeah, the phone speaker is not good for listening to music. Most of the time I listen to music with DSub or Pandora over Bluetooth headphones and it sounds fine.
Anyone else having issues with bluetooth using most of their battery? I wasn't even connected to a BT device yesterday and it just dropped off a cliff.
mswguitar said:
Anyone else having issues with bluetooth using most of their battery? I wasn't even connected to a BT device yesterday and it just dropped off a cliff.
Click to expand...
Click to collapse
With BT an wifi on through out the whole day while sleep I was actually stunned only 2% drop within 8hrs
DKStunna108 said:
With BT an wifi on through out the whole day while sleep I was actually stunned only 2% drop within 8hrs
Click to expand...
Click to collapse
Wow, do you have many BT devices paired to the phone? I have 5 or 6 and I'm wondering if the phone is constantly trying to re-connect to all of them throughout the day.
mswguitar said:
Wow, do you have many BT devices paired to the phone? I have 5 or 6 and I'm wondering if the phone is constantly trying to re-connect to all of them throughout the day.
Click to expand...
Click to collapse
Only have 2. I believe 3 is the max devices for our BT to have stable battery power
DKStunna108 said:
Only have 2. I believe 3 is the max devices for our BT to have stable battery power
Click to expand...
Click to collapse
Weird. I had this many on my BLOX 2016 and did not have this issue. I'm going to disable Tasker tomorrow and see if it helps (I have profiles setup based on BT connections). It's not a huge issue and with Quick Charge, I can get juiced up pretty quickly, just thought it was strange that BT is using so much of my battery.
I'm dying for root. Any info on how to? If possible
Sent from my Life One X2 using Tapatalk
Waiting for anyone to port TWRP....
Sent from my R1 HD using Tapatalk
Anyone else get the wireless update notification today? Based on BLU's history, this will probably be the only one we get.
Anyone know what the wireless update is? Just received the notification but don't want to take the plunge without more info
H4MM3RD0WN said:
Anyone know what the wireless update is? Just received the notification but don't want to take the plunge without more info
Click to expand...
Click to collapse
It just said minor bug fixes and something about app icons, which I'm not worried about because I use Nova Launcher. I installed the update, no adverse effects so far. I'll post again in the next day or two if I see any noticeable issues.