Develop Bugs

How to identify the right canbus for my car in factory tools ?

Hello there,
I actually have an Honda Civic 9g 2013 (European Model), with a RK3188 headunit (JY-UQ130).
I have recently purchased a Connects2 kit (ref CTSHO005.2) in order to recover SWC. This kit have a canbus controller and every plug/wire need.
I have successfully installed it on my car and SWC are OK now ! But I didn't recover anything else (no radio info displayed on ODB car, original inline/usb ports of the car don't work, no rear-view camera on headunit but OK on ODB car). I think that canbus is probably partially recognized.
Is it possible to recover missing functions ? Did I missed something in factory tools ? I saw multiples canbus that can works :
- 06 HONDA&CRV 2012 (simple) <= this is the one I have right now
- xx HONDA&CRV 2012 no USB (simple)
- xx HONDA_CRV 12 (high...)
(sorry I don't remember well the choices)
May I choose another one, or maybe an universal canbus choice ? Any help or suggestion could be great ! Thanks !!

I have the same on my CRV 2014. I use 06 HONDA&CRV 2012 (simple) setting with other canbus doesen't work.
About Your problems original inline/usb ports of the car don't work, no rear-view camera on headunit it doesent work because USB and camera are connected direct to MiD and they are don't connected with CANbus.
Problem with no radio info displayed on MiD can be fixed I think by some MTCradio app mod.

Bluetooth Low Energy (BLE) on MTCE PX5 - works?

Hi!
In general MTCE units have Bluetooth 4.0, which is also BLE compatabile.
Have anyone tried to use it with BLE devices?
Various BLE information apps says that there is BLE framework, but BLE scanner cannot find any device.
Best regards,
Karol

Hi!
Did anybody have experience of connecting BT4.0 BLE device to MTCE PX5?
I have a BT4.0 BLE remote control, it is recognized by OnePlus 3T, but my headunit doesn't see it

I need info of this too

I have two BLE devices both are engine Battery Monitors.
My Xtrons unit can not detect either of them so I would be very interested in finding out if an MCU update or 3rd party tool is available to fix this assuming the MX5 actually supports BLE?

Hi, I just got TPMS sensors planning to view all the info through my PX5 MTCE head unit but there was no way I could make it detect them. I am also following up on this.

No.

Seicane T3 K2001N Android 7.1.1 - no bluetooth aplication and shortcut to pair ELM327

I am new here so Hello first to everyone.
I just bought and installed a seicane Android 7.1.1 quad T3 K2001N 1GB 16G.
The seller does not answer my questions.
I am asking you guys for help "How to made bluetooth pairing with ELM327?"
There is no bluetooth icons:
- in apps list,
- in upper shortcut bar
- in android settings.
Only bluetooth aplication is "BT MUSIC" and its working perfect with Android smartphone.
How to made bluetooth pairing with ELM327 when there is no posibility to pair it in Android?
It is not possible to connect to the TORQUE program without pairing in android menu first.
Help please

Try to connect to it through the tool cabinet app then look for odb match

Ivanow100 said:
I am new here so Hello first to everyone.
I just bought and installed a seicane Android 7.1.1 quad T3 K2001N 1GB 16G.
The seller does not answer my questions.
I am asking you guys for help "How to made bluetooth pairing with ELM327?"
There is no bluetooth icons:
- in apps list,
- in upper shortcut bar
- in android settings.
Only bluetooth aplication is "BT MUSIC" and its working perfect with Android smartphone.
How to made bluetooth pairing with ELM327 when there is no posibility to pair it in Android?
It is not possible to connect to the TORQUE program without pairing in android menu first.
Help please
Click to expand...
Click to collapse
I have got a WiFi enabled ELM327 and it works without any glitch on this same unit.
Have you tried setting up the Bluetooth using the phone menu settings? Do not keep phone connected to unit while searching for OBD2 unit

I have the same problem.. I tried buying the bluetooth and the wifi dongle with 0 results.

emmandiet said:
I have the same problem.. I tried buying the bluetooth and the wifi dongle with 0 results.
Click to expand...
Click to collapse
Are you trying to run Torque (pro)?
Torque Pro works best with a USB connection
https://www.amazon.com/ScanTool-OBDLink-USB-Professional-Diagnostics/dp/B005ZWM0R4

FYI: Not MTCD, post in wrong forum.

Peugeot 308CC (T7) central display problem

Here's my problem: I own a Peugeot 308CC and a MTCD head unit with Android 9 (Malaysk).
When I set in the Peugeot diagnostic software that a car radio is connected, the radio station is displayed, but it is overlaid by a "Vocal" display (in radio mode). If I set that no radio is connected, the display only consists of the clock (which I could live with), but I can no longer make any settings on the on-board computer (time, language, ...).
Can anyone tell me which settings allow the on-board computer to be operated, but the "Vocal" display does not show up permanently.

Unstable Bluetooth Connection issue PX5 MTCD/MTCE Android 9

Hey guys.
I'm on a Xtrons TE103AP which is basically a PX5 MTCD/MTCE unit. I was previously on stock Android 8.0, had no issues with OBD Bluetooth pairing and running ECU based programs off of it. Moved to Malaysk's 8.0, no issues as well. MCU back then was the MTCD the unit came with, GS 2.71 if i remember correctly
I took the plunge and moved to Android 9, first with Hal9k's v4.0, then Stock Android 9 for GS units (the most recent release). I tried these 2 combinations with different MCU's from GS 3.00 right up to GS 3.44 (latest). While i'm able to pair with my BT OBD2 Adapter with no issues, i'm unable to maintain a connection. The bluetooth OBD icon on the task bar connects and randomly disconnects causing programs (torque and hybrid asst etc) to drop connections with the ECU.
The behavior is constant. I've tried changing selecting different bt drivers from the factory menu, to no avail.
Anyone can shed some insight?
Thanks!