Develop Bugs

[MOD] LG G2 - Lollipop Volume Booster - Best Audio Output/Settings

Updated for Lollipop Version :laugh:
increase your Headphone & Volume Output
Flash the Boosted file, if you want to revert flash the Stock file.
Note: This Mod only works for Lollipop Versions.
Download : https://drive.google.com/folderview...5mVVNUcUJwN0pTMEJxaXVJODJLUmI2NjI3bzVjbkJIM0U
----------------------------------------------------------------------------------------------------------------------------------
(Kitkat Versions)
Working with G3 Ported ROM's
This Mod Produce a Better Quality Sound like a Apple Device
Features: Loud Music - More Bass - Pure Clarity
Special Thanks & Credits to @iXNyNe @Henryy97 @zhuhang
Try on your own risk, im not responsible if you brick your device
Must be Stock KitKat ROM - Rooted & installed TWRP 2.7
Step 1 - Brings Volume Loudness
Step 2,3 - Quality Music Output
Step 1: Download and Flash any one zip file (preferred) listed below and Reboot.
link: http://d-h.st/users/NyNe/?fld_id=34873
1. lgg2-speaker1.3-65-signed.zip - Speaker & Headphone Boost (High)
2. lgg2-headphone1.3-6520-signed.zip - Only Headphone Boost (High)
3. lgg2-headphone1.3-6218-signed.zip - Only Headphone Boost (Medium)
Step 2: Download Viper4Android - FX version v2.3.3.0
link: http://vipersaudio.com/blog/?page_id=48
File downloaded from Step 2 Zip file has two files,Extract and place the 5.3 mb (4.x_2330) file on your SD Card and install the apk.
After installing it open Viper4Android and follow instructions, select Super Audio Quality and install the Driver if it says LPA is enabled do you wish to disable. just press Yes and now Reboot.
Step 3: Settings on Viper4Android are Very important for Best Enhanced Output.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4: After all the above process Reboot your Device and its Time to Plugin Your Headset :laugh:
Tested:
ON: Cloudy Pro II 1.2 - Cloudy Stock 1.3 - LG Stock Kitkat ROMs
With: Apple Earpods / Sony MDR-XB30EX / Sony MDR-XB400
1. This MOD is particularly Based on Headset settings, you can try with Speaker settings too but DO NOT enable EXTRALOUD at bottom of the Speaker settings.
2. Works with Stock Music Player, but Awesome :victory: with Player Pro (my opinion)
3. Do not enable Music Equalizer (try changing in Viper4Android - Select Preset)
if you want to revert to Stock Settings: Refer to page 12 - #118
Hit Thanks if these changes bring a better Audio in your G2

Hey thanks for the mod and glad to be of help to you. One question, I realized viper4android let's you choose sound quality settings. does it significantly affect battery life if I pitch the best?

mod not work with headset bluetooth. the sound is out with speaker when the headset is pair with phone

Henryy97 said:
Hey thanks for the mod and glad to be of help to you. One question, I realized viper4android let's you choose sound quality settings. does it significantly affect battery life if I pitch the best?
Click to expand...
Click to collapse
i was using this MOD since 5 days and i dont notice any Battery Drain. especially with Viper4Android. Battery remains the same as KItKat Stock

Choice...
The mod you posted works with a rooted phone. I have used your mod in the past and noticed a significant improvement in sound. Later I have been using non-rooted phone and was unable to get the Viper4droid function.
The choice I have made is to use Jetaudio with AM3D activated... It is not the best but provides better base and tones. The good thing is you can modulate both jet audio settings and AM3D and this helped in improving the output too...
Posted this, just to ensure that someone like me could try it .....

deleted...

Thanks for this, I've installed without a problem! I have just a question:
SandyKick said:
... if it says LPA is enabled do you wish to disable. just press Yes and now Reboot.
Click to expand...
Click to collapse
What's better, LPA enabled or not?
Thanks

TheMorpheus said:
Thanks for this, I've installed without a problem! I have just a question:
What's better, LPA enabled or not?
Thanks
Click to expand...
Click to collapse
to my knowledge LPA disabled has got better results disabling changes the following values
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
thanks for liking my MOD

hardykalyan said:
The mod you posted works with a rooted phone. I have used your mod in the past and noticed a significant improvement in sound. Later I have been using non-rooted phone and was unable to get the Viper4droid function.
The choice I have made is to use Jetaudio with AM3D activated... It is not the best but provides better base and tones. The good thing is you can modulate both jet audio settings and AM3D and this helped in improving the output too...
Posted this, just to ensure that someone like me could try it .....
Click to expand...
Click to collapse
Viper4Android should have root access, so according to you which one you found better ?
this mod or Jetaudio with AM3D activated ??

@down
Yup Yup xD

drakexpl said:
Step 3 is silly and funny. Every headphones are different. V4A thread is already here so what's the point of creating another
Wysłane z mojego LG-D802 przy użyciu Tapatalka
Click to expand...
Click to collapse
Some ppl think its silly, but still people are confused what settings to be used. be fair man, helping and being clear is not bad ri8 ?
better you notice step 1. you cant find that in Viper4Android...this is a combination of two good mods.

SandyKick said:
to my knowledge LPA disabled has got better results disabling changes the following values
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
thanks for liking my MOD
Click to expand...
Click to collapse
How do you revert back after the first sound mod? How do you revert LPA back after disabling? Have you noticed any difference in battery life? LPA is supposed to really increase battery life, so I'm reluctant to disable or change anything without the option to revert back, I know you can take a nandroid but that's time consuming, are there easier ways? Thanks!

Keep in mind the step 1 zip you are using is only for cloudy ROM.
While it may work with other firmware it is actually overwriting the intended settings provided by the firmware. For example CyanogenMod and omni have wildly different values in mixer_paths.xml than the one you provided.
If you want a zip that will do pretty much the same thing as step 1 see my thread http://forum.xda-developers.com/showthread.php?t=2701745

Seems that there is a little bit background noise after ViPER Clarity is enabled and set to 10.0dB ?
It's quite serious actually.
BTW, what is the purpose of changing the values of mixer_paths.xml? ( just curious to know @@ )

kevintong116 said:
Seems that there is a little bit background noise after ViPER Clarity is enabled and set to 10.0dB ?
It's quite serious actually.
BTW, what is the purpose of changing the values of mixer_paths.xml? ( just curious to know @@ )
Click to expand...
Click to collapse
The values changed in the mixer_paths.xml mod I posted are specifically to boost the volume output of the headphones and prevent a volume level change when switching between music and phone call etc.
There are other things that can be done using mixer_paths.xml like the bass reducer for the speaker which solves some distortion issues. You can also adjust the speaker volume, the call volume, and many other things.
I'm not 100% sure the of what changes the cloudy zip from the op makes. It's a premade firmware specific file, and probably shouldn't be flashed on a firmware that isn't cloudy. But I can tell you that the mod I posted actually gives you louder sound output then the cloudy one, and it's universal to all KitKat firmware.
Sent from my LG-D800 using Tapatalk

iXNyNe said:
The values changed in the mixer_paths.xml mod I posted are specifically to boost the volume output of the headphones and prevent a volume level change when switching between music and phone call etc.
There are other things that can be done using mixer_paths.xml like the bass reducer for the speaker which solves some distortion issues. You can also adjust the speaker volume, the call volume, and many other things.
I'm not 100% sure the of what changes the cloudy zip from the op makes. It's a premade firmware specific file, and probably shouldn't be flashed on a firmware that isn't cloudy. But I can tell you that the mod I posted actually gives you louder sound output then the cloudy one, and it's universal to all KitKat firmware.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
How about the noise? Is that normal?

kevintong116 said:
How about the noise? Is that normal?
Click to expand...
Click to collapse
Couldn't tell you. I'm not using viper, and I'm on CyanogenMod.
I recommend you try to clean flash your firmware (which will undo the mixer mod) and then try the mixer mod from my thread without viper and see how it sounds. If you need the viper mod after that you can add it, but at least you won't be using the wrong mixer file (my mod just changes YOUR mixer file rather than replacing it)
Sent from my LG-D800 using Tapatalk

Noozxoid EIZO-rewire is much better than Viper. IMHO

Why is it that when I extracted the mixer_paths.xml file from the zip and replaced it with my original mixer_paths.xml i got bootloop?

Henryy97 said:
Why is it that when I extracted the mixer_paths.xml file from the zip and replaced it with my original mixer_paths.xml i got bootloop?
Click to expand...
Click to collapse
Probably not meant for your firmware. Please read my other posts on page 2 of this thread.
Sent from my LG-D800 using Tapatalk

[MOD] - WETA Audio 9.1 - [aroma][V4A][DolbyAtmos][xloud][srs][beats][+++]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You flash this MOD at your own risk,
i take no responsibility for any mishaps.​
Subscribe to update notifications and general chat by clicking the button below
PIXEL TELEGRAM CHANNEL​
This here is my personal setup and thought i'd share. Usually i test extensively before releasing to public, but if you do find something detrimental to the usage of your device that is either Force Closing or simply not working, let me know and i will in turn inform whether that is something i will tend to.
WETA is a rom for Music geeks like me, though because we are still waiting on TWRP to become available i'd thought i'd make this MOD to flash in the meantime. Its main focus is Audio. ​
This mod installs the following...
V4A 2.5.0.5 or 2.3.4.0
Dolby Atmos
Sony Xperiaâ„¢ Z5 Premium audio system
Beatsâ„¢ libraries and effects
WETA Reboot app
​
How to install...
As of 9.0 moving forward, you will need to flash this mod using TWRP.
NOTE: There have been some issues with systemui crashing after install. This results in having to flash back to stock and in some cases having to wipe phone completely.
I advise running an un-encrypted file system at this stage, which may or may not help. Just be aware that things are basically experimental at these early stages.
1. Make sure you are on Stock firmware and have rooted device
2. Download mod zip
3. Install this app "Root Browser"
4. Extract the zip (click and hold, select extract) using Root Browser directly into Download folder. (you should have /sdcard/Download/WETA_*** as folder with files in it)
5. Go into Download/WETA_*** folder and select WETA-flash.sh
6. Tick "Execute script as root"
7. Then select the Execute button
8. It will say "Executing script"
9. Once complete you should have a popup box with no errrors.
10. Reboot device and mods should be installed....
Changes...
31st Oct
Fixed some things in audio_effects.conf
Added a new mod, 3minit battery to download page
#3 1st Nov
Modified build.props
Added System wide audio
#5 + #5b
Script modifications to be more universal for build.prop mod
- no longer replaces build.prop, now appends to file instead, keeping existing mod lines
V4ADA1 + V4ADA2
V4ADA1 - V4a 2.5.0.5
V4ADA2 - V4a 2.3.4.0
Both these versions have all audio mods omitted as to help with echoing while gaming.
Only V4A and Atmos present.
Fyi.. this can be flashed over the top of previous audio mods
12th Nov
WETA Audio 7 + 7b + V4ADA1_V5 + V4ADA2_V5
removed modification of audio_policy_config file
12th NOV
WETA Audio 8 + 8b + V4ADA1_V6 + V4ADA2_V6
More audio_policy_config tweaks for spotify
WETA Audio 9.0
WETA Audio 9.1
Fixed V4A convolver and profile permissions
– FYI this will wipe out your /sdcard/ViPER4Android folder
This version is an Aroma installer version. TWRP only.
Added Sony music player
Weta reboot option
BusyBox Install option
Weta audio remover
MOD Download Page
If you like my work, please consider buying this poor guy a craft beer for his efforts

WETA I still use ur ROM for 6p.. hoping u making one for the Pixel as well!! Especially with WETA Mods

Thanks for this but it did not work for me. I placed the zip in my sdcard/Download directory and extracted it with Root Browser. Selected the .sh file and executed the script as root but I get the following:
no such file or directory

mdecker79 said:
Thanks for this but it did not work for me. I placed the zip in my sdcard/Download directory and extracted it with Root Browser. Selected the .sh file and executed the script as root but I get the following:
no such file or directory
Click to expand...
Click to collapse
If your extracted folder was "WETA_Audio_Pixel", try renaming it to just "WETA_Audio". I had the same problem and that is how I got it to install. I am going to test it now. Thank you Mentalmuso. V4A is one of the main reasons why I root.

mattyv316 said:
If your extracted folder was "WETA_Audio_Pixel", try renaming it to just "WETA_Audio". I had the same problem and that is how I got it to install. I am going to test it now. Thank you Mentalmuso. V4A is one of the main reasons why I root.
Click to expand...
Click to collapse
Thank you very much. Yes it did execute and I'm currently rebooting. Sometimes I overlook the simple things thinking it's much more involved.

WETA Audio mod #2
Just made some changes to audio_effects.conf, there was some mistakes in there.
This can be installed over the top of the old mod.
Download Page
--->

Works great after the update. Thank you!

The link to AFH is broken. Gives a 404 error.
PS thanks for this lol. I was thinking about using my 6P for music but then this popped up since I have notifications on for your website.

curtdragon said:
The link to AFH is broken. Gives a 404 error.
PS thanks for this lol. I was thinking about using my 6P for music but then this popped up since I have notifications on for your website.
Click to expand...
Click to collapse
Fixed the link, thanks
? --->

I've added a 3minit battery mod also fyi.
? --->

varun.gid said:
WETA I still use ur ROM for 6p.. hoping u making one for the Pixel as well!! Especially with WETA Mods
Click to expand...
Click to collapse
Yeah I'm planning to, I just got tired of waiting for a custom recovery. This is actually a good way to test mods.
? --->

Mentalmuso said:
Yeah I'm planning to, I just got tired of waiting for a custom recovery. This is actually a good way to test mods.
--->
Click to expand...
Click to collapse
awesome! any chance of navbar height change mod and 5 quicktiles also..

varun.gid said:
awesome! any chance of navbar height change mod and 5 quicktiles also..
Click to expand...
Click to collapse
Yes, I'll work on those one by one, probably navbar height first, as I use that mod myself
? --->

I just tried this and it crashed my system ui. I did have the SystemUI Tuner enabled. This may cause issues. Now, I cannot use the phone. I am looking for a way todo the system image.

I just want to note to anyone else having issues. You must use the file app that was mentioned. I usually use Root Explorer but I guess the way Root Browser runs the script it does it correctly.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
SmokinCharger said:
I just tried this and it crashed my system ui. I did have the SystemUI Tuner enabled. This may cause issues. Now, I cannot use the phone. I am looking for a way todo the system image.
Click to expand...
Click to collapse
I have system tuner enabled. No issues here. Maybe it's something else or how the phone was rooted?

[MOD] - WETA Audio - [V4A][DolbyAtmos][+++]
SmokinCharger said:
I just tried this and it crashed my system ui. I did have the SystemUI Tuner enabled. This may cause issues. Now, I cannot use the phone. I am looking for a way todo the system image.
Click to expand...
Click to collapse
I'm interested in whether you have modded anything else on your phone. As the Audio mode don't touch systemui. Though I had a major systemui crash earlier but I was running 3minit mod and though it crapped out on me. Though I got the systemui crash after using Spotify via Bluetooth, it went to lockscreen then when I unlocked systemui crashed. So I'm wondering what mod caused it now
Have you been using Bluetooth or Spotify?

curtdragon said:
I just want to note to anyone else having issues. You must use the file app that was mentioned. I usually use Root Explorer but I guess the way Root Browser runs the script it does it correctly.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
I have system tuner enabled. No issues here. Maybe it's something else or how the phone was rooted?
Click to expand...
Click to collapse
I used Root Browser and it immediately crashed and rebooted after executing the script. As far as I know, the chainfire boot-to-root.img it the only way to root. No tweaks or mods yet. Everything was working great prior to this running this mod.
That is the nature of working with rooted phones. Sometimes things just happen. I just wanted people to know that it could mess up the system and be prepared to flash system to resolve.
---------- Post added at 10:27 AM ---------- Previous post was at 10:22 AM ----------
Mentalmuso said:
I'm interested in whether you have modded anything else on your phone. As the Audio mode don't touch systemui. Though I had a major systemui crash earlier but I was running 3minit mod and though it crapped out on me. Though I got the systemui crash after using Spotify via Bluetooth, it went to lockscreen then when I unlocked systemui crashed. So I'm wondering what mod caused it now
Have you been using Bluetooth or Spotify?
Click to expand...
Click to collapse
Purchased from Google Store for use on Verizon. It was unlocked and rooted of course. This was the first mod that I was applying. Yes, it was connected to Bluetooth to wireless speaker and Pandora playing.

[MOD] - WETA Audio - [V4A][DolbyAtmos][+++]
SmokinCharger said:
I used Root Browser and it immediately crashed and rebooted after executing the script. As far as I know, the chainfire boot-to-root.img it the only way to root. No tweaks or mods yet. Everything was working great prior to this running this mod.
That is the nature of working with rooted phones. Sometimes things just happen. I just wanted people to know that it could mess up the system and be prepared to flash system to resolve.
---------- Post added at 10:27 AM ---------- Previous post was at 10:22 AM ----------
Purchased from Google Store for use on Verizon. It was unlocked and rooted of course. This was the first mod that I was applying. Yes, it was connected to Bluetooth to wireless speaker and Pandora playing.
Click to expand...
Click to collapse
It crashed while running the script? That ain't right haha.
Sorry but what was it that crashed exactly? Did the phone go into a boot loop? Or did systemui crash

Mentalmuso said:
It crashed while running the script? That ain't right haha.
Sorry but what was it that crashed exactly? Did the phone go into a boot loop? Or did systemui crash
Click to expand...
Click to collapse
Almost immediately after I ran the script, the phone rebooted. Once it rebooted, I am getting a constant System UI crash and caannot do anything.

SmokinCharger said:
Almost immediately after I ran the script, the phone rebooted. Once it rebooted, I am getting a constant System UI crash and caannot do anything.
Click to expand...
Click to collapse
You'll have to fastboot flash system system.img. You won't lose any data. Do vendor as well to be safe. Just double checking here, but you downloaded the audio mod and not the 3minit battery mod right? WETA_Audio_2.zip not WETA_3M.zip? Thanks for being a crash guinea pig, I'll be looking into this later today.

[SoundMod] (6.0+) Hana Audio Engine For Xperia M

Hana Audio Engine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For Xperia M​Dream, Imagine & Feel What You Can't Hear It Here...​
Hi everyone, i want to share my first soundmod for Xperia M device . First of all give thanks to @PDesire for source sound file and another sound developer . And with this soundmod i will introduce wonderful sound quality with stabilize, clear voice and include optimization for low freq channel (LFE). For now this soundmod work with all custom ROM for Xperia M That based on 6.0+.
This soundmod feature ;
- Qualcomm Audio Effects
- Sony Audio Effects
- Beats Audio with Harman Kardon
- Dolby DAX Audio
- SRS
- Alsa Resampler with 48KHz (96Khz for Experimental)
- SoundAlive Audio
- DTS Eagle
- BBESonicMax
- MaxxAudio and still many more inside
How to install :
- Remove all soundmod that already installed on your system before install my mod
- Download Hana Audio Engine and go to recovery, after that flash this zip
- And try to hear the different from Hana Audio Engine
After installing this soundmod, you can try to play some song to test. Not need to access soundenhancement again, but if you want it you still can access it .
How to access sony soundenhancement
- Go to settings and select apps and click 3 dot buttons
- Choose show system and search audioFX (or maybe you can try to disable this app)
- Search Open by default and choose Clear Defaults option.
- After that you can try to set it with cm music app, and go to equalizer settings with 3 dot buttons and select sony soundenhancement .
How to access Snapdragon Audio+ for video :
- Go to stock gallery app and try to play some video
- Plug in your headset to your phone and try to click 3 dot buttons
- Choose Audio Effects and and you can configure Snapdragon Audio+ in this part
(NOTE: try to disable this effects after you play video, because this will wake conflicts with Hana Audio)
For uninstallation this mod :
- Wipe your system and re-flash back your system with any additional zip in recovery mode
(if you have it and my mod will completely uninstalled)
I'm not make any uninstaller for this mod
Recommended Audio Player :
- Poweramp Audio Player
(For advanced audio configuration)
Or any audio player that you like it
Have Try :laugh:.
- Additional Explanation
How to switch audio engine
How to switch audio frequency and audio channel
This is for Download Link
Android File Host
https://www.androidfilehost.com/?fid=673368273298929695

Nicklas Van Dam said:
Dream, Imagine & Feel What You Can't Hear It Here...
Click to expand...
Click to collapse
Congratulations my friend and good luck with your new mod. [emoji122] [emoji106]

kh34d said:
Congratulations my friend and good luck with your new mod. [emoji122] [emoji106]
Click to expand...
Click to collapse
Your welcome my friend .

Nicklas Van Dam said:
Hana Audio Engine
For Xperia M
How to install :
- Remove all soundmod that already installed on your system before install my mod
Click to expand...
Click to collapse
Nice work ! I installed you mod but when I try to access it I am not able to access it, only audio fx is opening! How to remove audiofx and get ur mod !?
And also if you provide steps to uninstall this mod, it will helpful for people who wants to try some other Mods

FakrudeenAhamed said:
Nice work ! I installed you mod but when I try to access it I am not able to access it, only audio fx is opening! How to remove audiofx and get ur mod !?
And also if you provide steps to uninstall this mod, it will helpful for people who wants to try some other Mods
Click to expand...
Click to collapse
to select sony soundenhancement, go to settings and select apps and click 3 dot buttons and choose show system. After that search audioFX and search Open by default, after that choose Clear Defaults option.
And you can try to set it with cm music app, and go to equalizer settings with 3 dot buttons and select sony soundenhancement .
And for uninstallation i'm not make any uninstaller for this mod, just wipe your system and re-flash back your system with any additional zip if you have it and my mod will completely uninstalled .
Thanks for your suggestion

>.>
hope you took help from viper4arise devs....?
they make awesome mods

Thanks for keeping nicki mods alive

Adarsh Dubey said:
Thanks for keeping nicki mods alive
Click to expand...
Click to collapse
You're welcome , I'm still working on this mod and already solve some problem. But maybe this update will delay until my laptop is back from service center.
Sorry :crying:
Sent from my Sony Xperia M using XDA Labs

New update is released !
New Update is already released with new audio enhancement and new 96Khz audio freq (Experimental).
In this update i'm still enable DSEE-HX feature to make sound quality is good, but this make we can't use Sony Music app.
If someone want to use Sony Music App, then try to use root explorer and go to /system and choose file build.prop.
hold up for a second until new option is pop up, choose open in text editor and find this string.
"ro.somc.dseehx.supported=true" and change it too "ro.somc.dseehx.supported=false"
save and reboot your phone, then we can use Sony Music app again.
In this update i'm re-new sound engine and include 2 new engine , that you can switch it in terminal.
1. Hana Illusion Audio Enhancement (Stock Audio Effects) [AIE]
This audio engine will give you a sound quality with great balance for rock and pop music, include low background effects and great bass sound.
2. Hana Illusion Bass Audio Enhancement [AIBE]
This audio engine based on Hana Illusion, but this is not included low background effects, but have clear voice with great bass sound. This audio engine only support for rock music.
3. Hana Bass Audio Enhancement [HBAE]
This audio engine is based from old engine that have powerful bass and little background effects, my little brother design this effect. This audio engine only for rock and some pop music.
How to switch audio engine
- Download or install terminal emulator app from Playstore
- and type this command
su
cd /system/Hana-audio
sh hana.sh
- you can choose what audio engine that you'll switch it
- and reboot after it
Download available in OP Thread

Other configuration
How to change to 96Khz :
- Download or install terminal emulator app from Playstore
- and type this command
su
cd /system/Hana-audio
sh freq.sh
- you can choose what freq that you'll switch it
- and reboot after it
[NOTE : switch to 96Khz will give higher sound quality, but this will need a lot of cpu process too during sound processing.]
How to enable or disable 6 Audio Channel :
- Download or install terminal emulator app from Playstore
- and type this command
su
cd /system/Hana-audio
sh LFE.sh
- you can choose what channel that you'll switch it
- and reboot after it
[NOTE: Stock already enabled 6 [LFE] channel, if you try to disable it then channel will switch to 3 [LFE] channel.

Disortion
Sound is a little bit disorted on max volume, still great job

Karinica said:
Sound is a little bit disorted on max volume, still great job
Click to expand...
Click to collapse
You're welcome bro , I'll try to look at that problem when I'm finish with my kernel

Will it work on latest Resurrection remix 5.8.2??

nicki sound mod, thanks for that. We need it.

Link update google disk please
Link update google disk please

viper4android on 8.1.0

has anyone figured out viper4android on 8.1?
i think we need to wait for the kernel sources to get released. I tried magisk + v4a magisk module + busybox + permissive mode - and still no dice

What Version of v4a did you try?

Yes, I have it working.
Install it as normal (2.5.0.5, ShadySquirrel) with magisk and reboot
Use a root file explorer (I use Solid) to move /magisk/viper4android/system/lib/ to /magisk/viper4android/vendor/lib. Copy this folder to /magisk/viper4android/system/vendor/lib (making folders as well)
Copy /system/lib/libstdc++.so to both of these folders
Reboot, viper won't complain about drivers now. Open Viper's settings and set it to compatibility mode, and disable selinux with the development settings. You have to disable selinux every reboot for it to keep working.
I'll repackage the module at some point but this is how it works

did anyone get this to work? i followed directions and its still propting me to install driver

slothdabski said:
did anyone get this to work? i followed directions and its still propting me to install driver
Click to expand...
Click to collapse
I'll give it a go... usually good with this stuff and I'll let you know!
---------- Post added at 12:33 PM ---------- Previous post was at 12:13 PM ----------
Following those steps I was able to at least get Viper to install the driver without the I/O error.. but after I reboot it still asks to install... still trying. I deleted the /magisk/viper4android/system/lib/ after moving everything to /magisk/viper4android/system/vendor/lib ... maybe that was wrong?
---------- Post added at 12:51 PM ---------- Previous post was at 12:33 PM ----------
Not working here.. just can't seem to get it configured properly. Was able to get rid of the I/O error but.. it's still not enabled no matter what I do with it...
---------- Post added at 01:19 PM ---------- Previous post was at 12:51 PM ----------
I'm relocking my device... nothing to do with the process I attempted here.. Just keep losing root randomly and other odd behaviors ... will wait for an updated Magisk and Viper. Cheers!

wasn't able to get past the drive i/o error
i wasn't able to get past v4a complaining about drivers. i even recursively chmod -R 755 everything in the /magisk/viper4android folder in a desperate attempt to sift out a permissions issue
can someone who got past the drivers issue run:
ls -l -R
in /magisk - and paste the screenshot or output here? i've been using adb shell with root btw to navigate around the filesystem.
thanks!

Quinny899 said:
Yes, I have it working.
Install it as normal (2.5.0.5, ShadySquirrel) with magisk and reboot
Use a root file explorer (I use Solid) to move /magisk/viper4android/system/lib/ to /magisk/viper4android/vendor/lib. Copy this folder to /magisk/viper4android/system/vendor/lib (making folders as well)
Copy /system/lib/libstdc++.so to both of these folders
Reboot, viper won't complain about drivers now. Open Viper's settings and set it to compatibility mode, and disable selinux with the development settings. You have to disable selinux every reboot for it to keep working.
I'll repackage the module at some point but this is how it works
Click to expand...
Click to collapse
Didn't seem to work for me on 8.1 DP2. Maybe i copied the files wrong? I copied the lib folder from /magisk/viper4android/system to /magisk/viper4android/vendor, so basically I just copied the lib folder to that location. Then i went to /system/lib and copied libstdc++.so to /magisk/viper4android/system/lib/ and /magisk/viper4android/vendor/lib. Switched to permissive mode and compatibility and still bugs me about drivers. Maybe I had to move the files and not copy? I really don't know and I'm going crazy here. Any idea what I should do?

joedajoester said:
Didn't seem to work for me on 8.1 DP2. Maybe i copied the files wrong? I copied the lib folder from /magisk/viper4android/system to /magisk/viper4android/vendor, so basically I just copied the lib folder to that location. Then i went to /system/lib and copied libstdc++.so to /magisk/viper4android/system/lib/ and /magisk/viper4android/vendor/lib. Switched to permissive mode and compatibility and still bugs me about drivers. Maybe I had to move the files and not copy? I really don't know and I'm going crazy here. Any idea what I should do?
Click to expand...
Click to collapse
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
Worked for me. I'm running the 8.1 preview DP2.
Strangely enough, your install files contained extra files than mine. The audio_effects.xml file wasn't there for mine on any installation. How odd.
Thank you, though. I followed your instructions in an earlier post and it never once started to work.
I'm not using compatible mode either.

Ariac Konrel said:
Worked for me. I'm running the 8.1 preview DP2.
Strangely enough, your install files contained extra files than mine. The audio_effects.xml file wasn't there for mine on any installation. How odd.
Thank you, though. I followed your instructions in an earlier post and it never once started to work.
I'm not using compatible mode either.
Click to expand...
Click to collapse
I modified that file a while ago as a test, no idea if it makes a difference. It might do ¯\_(ツ)_/¯

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
It works! Thank you so much. At first it made the viper app disappear so I started over. I installed the module from magisk, rebooted and then copied the files, set selinux to permissive and then I was in business. Seriously thank you so much. Without viper, my car won't play below 50hz and with viper I can make it play down to 30hz. I also made my own convolver file to add a high pass filter so that my speakers don't try to play below 30hz because then they distort at moderate volume. With the convolver, I am able to blast it. Makes it sound like a have a subwoofer and I am pushing my speakers almost to their limits, but boy do they sound great. Again, thank you!

joedajoester said:
It works! Thank you so much. At first it made the viper app disappear so I started over. I installed the module from magisk, rebooted and then copied the files, set selinux to permissive and then I was in business. Seriously thank you so much. Without viper, my car won't play below 50hz and with viper I can make it play down to 30hz. I also made my own convolver file to add a high pass filter so that my speakers don't try to play below 30hz because then they distort at moderate volume. With the convolver, I am able to blast it. Makes it sound like a have a subwoofer and I am pushing my speakers almost to their limits, but boy do they sound great. Again, thank you!
Click to expand...
Click to collapse
Oh yeah, I never install the viper app to the system because it doesn't load IR profiles correctly then. I always remove it from the module and install it as a user app, you can also use any themed version you want then, like the material one:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
It works for me for phone speaker but I can't get it to process Bluetooth.

Quinny899 said:
Oh yeah, I never install the viper app to the system because it doesn't load IR profiles correctly then. I always remove it from the module and install it as a user app, you can also use any themed version you want then, like the material one:
Click to expand...
Click to collapse
Would you mind sharing your convolver for the low pass filter and/or be able to combine it with sibilance correction in the 8khz range (or teach us how)? I'm trying to use Tracks master de-essed convolver. The problem I'm having is that in BSD_Geek Jake's IRS pack, *the convolvers aren't working*.
I extracted the IRS files directly to the Kernel folder in Viper4Android directory on sdcard. Viper is processing, and I know because if I toggle FET compressor, I hear the difference. However, choosing any convolver doesn't affect sound.

Quinny899 said:
I've attached the viper folder from my magisk directory. Replace yours with it and set any file's permissions (although that shouldn't be needed because magisk can handle it), reboot and see if that works:
https://drive.google.com/file/d/1oTTQbox31LvPzQCd2iDadNZJIXJDcdHp/view?usp=sharing
Note, the zip IS NOT flashable, IS NOT installable by magisk and SHOULD NOT be used on anything other than a Pixel 2 XL running the 8.1 preview.
Click to expand...
Click to collapse
it works! thanks alot Quinny899

davidisflash said:
Would you mind sharing your convolver for the low pass filter and/or be able to combine it with sibilance correction in the 8khz range (or teach us how)? I'm trying to use Tracks master de-essed convolver. The problem I'm having is that in BSD_Geek Jake's IRS pack, *the convolvers aren't working*.
I extracted the IRS files directly to the Kernel folder in Viper4Android directory on sdcard. Viper is processing, and I know because if I toggle FET compressor, I hear the difference. However, choosing any convolver doesn't affect sound.
Click to expand...
Click to collapse
Like I say, remove the app from the magisk module's system/priv-app, reboot and install it as you would any other APK. I don't know why module authors insist on having the APK in the system, it breaks things

Quinny899 said:
Like I say, remove the app from the magisk module's system/priv-app, reboot and install it as you would any other APK. I don't know why module authors insist on having the APK in the system, it breaks things
Click to expand...
Click to collapse
I didn't do anything with moving it from the system app and my convolver works. I have an irs response I made to slope off <30hz and it works. Not sure what is happening there :shrug:

My method still works on the 8.1 release it anyone is wondering

Working for me on 8.1.

Quinny899 said:
My method still works on the 8.1 release it anyone is wondering
Click to expand...
Click to collapse
Sorry, I'm having a little trouble understanding how to use your method with your zip file. Should I extract the contents and then place that folder in my data apps, reboot, then install the apk??

Dolby Atmos Equaliser 7T (HD1903) (no root needed)

I was searching for the possibility to enable EQ on 7t without root, but nothing really worked, until I found Dolby Atmos DAX2 app (originaly from Razer phone)... (you can find it on apkmirror - I cannot share links yet...) works pretty well... you can even turn it off completely... maybe someone can have a use for it too...

https://www.apkmirror.com/apk/razer...x2_2-6-0-28_r1-android-apk-download/download/

Amazing!!!
Enviado desde mi HD1900 mediante Tapatalk

ChrisFeiveel84 said:
https://www.apkmirror.com/apk/razer...x2_2-6-0-28_r1-android-apk-download/download/
Click to expand...
Click to collapse
it's worked....

Thanks! With this app I disabled Dolby Atmos and everything sounds better now lol

:good:
---------- Post added at 12:19 AM ---------- Previous post was at 12:15 AM ----------
ej8989 said:
Thanks! With this app I disabled Dolby Atmos and everything sounds better now lol
Click to expand...
Click to collapse
Wow, it's truly amazing to test the demo showed in the app in order to appreciate the difference.
So once I installed the apk, how can I set it as the default app for sound? I mean, is it just turning it on? Do I have to disable the stock Dolby Atmos app? If so, how could I do that? Thank you very much.

adripgarcia96, this app and stock atmos (in settings) are only UI apps for tuning the same core dolby audio library, which is pre-installed and default already.
However stock atmos app will be always re-applying its own settings when you plug/unplug headphones (ie change output device), so to avoid mess i suggest 2 options:
1. If you have root, you can disable stock atmos tuner service ("SoundTunerService") via MyAndroidTools app.
2. If you don't have root, don't touch stock tuner in speaker mode (use only this app) and don't touch this app (use only stock tuner) with any headphones plugged.

Embox said:
adripgarcia96, this app and stock atmos (in settings) are only UI apps for tuning the same core dolby audio library, which is pre-installed and default already.
However stock atmos app will be always re-applying its own settings when you plug/unplug headphones (ie change output device), so to avoid mess i suggest 2 options:
1. If you have root, you can disable stock atmos tuner service ("SoundTunerService") via MyAndroidTools app.
2. If you don't have root, don't touch stock tuner in speaker mode (use only this app) and don't touch this app (use only stock tuner) with any headphones plugged.
Click to expand...
Click to collapse
I disabled built in dolby thru adb and just control dolby thru the app posted in this thread. Works as I intended it to.

ej8989 said:
I disabled built in dolby thru adb and just control dolby thru the app posted in this thread. Works as I intended it to.
Click to expand...
Click to collapse
Agree, adb is the deal too.
Did you also lose separate eq profiles for devices (need manual switch)? I still lack it.

ej8989 said:
I disabled built in dolby thru adb and just control dolby thru the app posted in this thread. Works as I intended it to.
Click to expand...
Click to collapse
How to do this via adb, sorry I am noob

Works great. Thank you for sharing

Works good. Tested it.

Embox said:
Agree, adb is the deal too.
Did you also lose separate eq profiles for devices (need manual switch)? I still lack it.
Click to expand...
Click to collapse
I always manual switch. The app posted in this thread has a Quick-settings toggle.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DerDavid01 said:
How to do this via adb, sorry I am noob
Click to expand...
Click to collapse
1. Install Minimal ADB and Fastboot (CLICK HERE)
2. Enable Developer Options, then turn on USB Debugging
3. Connect phone to PC, when prompted in the phone, allow debugging
4. Type
Code:
adb shell pm disable-user --user 0 com.oneplus.sound.tuner
then press enter
5. Reboot.

ej8989 said:
I always manual switch. The app posted in this thread has a Quick-settings toggle.
1. Install Minimal ADB and Fastboot (CLICK HERE)
2. Enable Developer Options, then turn on USB Debugging
3. Connect phone to PC, when prompted in the phone, allow debugging
4. Type
Code:
adb shell pm disable-user --user 0 com.oneplus.sound.tuner
then press enter
5. Reboot.
Click to expand...
Click to collapse
Hi can you post how to reenable oneplus sound tuner, just in case?
Thank you
Never mind, to re-enable the app you need to type the following in windwos command prompt:
to re-enable built in sound tuner:
Code:
adb shell pm enable com.oneplus.sound.tuner
then reboot phone
by the way with this command you can list the currently disabled apps:
Code:
adb shell pm list packages -d

Frequencies in Hz for this 10-band EQ (both this app and stock dolby tuner):
46 220 460 840 1000 2000 3000 5000 9000 13800 (Hz)
Finally, these gains will be transformed into internal 20-band dolby EQ with frequencies:
46,141,234,328,460, 656,844,1031,1313,1688, 2250,3000,3750,4688,5813, 7125,9000,11250,13800,19688 (Hz)
The tenth band (13800 hz) tunes 19688 Hz as well. Might be useful for precise tuning

Hege said:
I was searching for the possibility to enable EQ on 7t without root, but nothing really worked, until I found Dolby Atmos DAX2 app (originaly from Razer phone)... (you can find it on apkmirror - I cannot share links yet...) works pretty well... you can even turn it off completely... maybe someone can have a use for it too...
Click to expand...
Click to collapse
It works well. Thanks

Can someone share thier settings in Dolby app which they feel really makes improvement on loudspeakers

Is it not getting switched off when you change songs. For me everytime I change songs this get switched off.

Why you install this app if oxygen has an internal dolby equalizer? Is the same...

Ivixmax said:
Why you install this app if oxygen has an internal dolby equalizer? Is the same...
Click to expand...
Click to collapse
No it's not.. this app is working better and you can feel the difference only by tapping on it's dedicated qs tile, when you're playing music or videos