http://opensource.samsung.com/reception/reception_main.do?searchValue=i9000&method=reception_search
Looks like Samsung JUST uploaded a newer version of their open source code with version "2". They just uploaded TODAY!
Check it out.
Anybody knows the changelog ? Thanks !
Damn Samsung is fast... It took like a million letters to get HTC to release source code for their android devices...
I don 't know anything about programming,i'd just like to know:will it be possible to have ports from other devices before official samsung releases,or is it still "locked" like before?
ConceptVBS said:
http://opensource.samsung.com/reception/reception_main.do?searchValue=i9000&method=reception_search
Looks like Samsung JUST uploaded a newer version of their open source code with version "2". They just uploaded TODAY!
Check it out.
Click to expand...
Click to collapse
it is still an eclair release not froyo
They put the readme, a short summary how to build their stuff. May be some missing folder/files from 1st release, I didn't compare.
With the main thread for Google Wallet (GW) now reaching well into 200 pages it is getting to the point where it takes hrs to find out if GW will work for you.
lgkahn, daitienshi, and myself have develped a spreadsheet for tracking what works and does not. Feel free to check the list. If the rom you are running is not listed give it a try and let one of us know through a private msg, and we will add it to the list. If you happen to have GW working please let us know so that we can add it to our spreadsheet.
Please include the following.
Carrier
ROM
ROM Version
Base Band (this can be found in settings / about phone)
GW version
Any extras that need to be flashed
What build.prop you used and if you changed it back to stock
Any notes that you feel are relevant.
And last but not least DOES IT WORK.
Samsung Galaxy S III Google Wallet Compatibility
The carriers have been broken out into different tabs at the bottom.
ROMS that are compatible.
SERENITY 1.3 - T-Mobile GNote II Port
JellyBean747 Milestone 7 Graystone Edition
Carrier : T-mobile
ROM: FreeGS3 R6
ROM Version: R6
Base Band : T999UVLH2
GW version: Wallet version 1.4-r79-v5-2 (Hoping to update to r81 just need to find out what to do to go from current version to latest)
do as stated in original op for gw and you are set
What build.prop you used and if you changed it back to stock: htc_jewel
Any notes that you feel are relevant.: none
And last but not least DOES IT WORK.: Yes it does work tried it at two different McDonald' and my job which is a car dealership. So far so good.
1Shotwonder said:
Carrier : T-mobile
ROM: FreeGS3 R6
ROM Version: R6
Base Band : T999UVLH2
GW version: Wallet version 1.4-r79-v5-2 (Hoping to update to r81 just need to find out what to do to go from current version to latest)
do as stated in original op for gw and you are set
What build.prop you used and if you changed it back to stock: htc_jewel
Any notes that you feel are relevant.: none
And last but not least DOES IT WORK.: Yes it does work tried it at two different McDonald' and my job which is a car dealership. So far so good.
Click to expand...
Click to collapse
Thank you it as been added to the list.
Just a note you forgot to add the carrier to the spread sheet not sure if you left out on purpose but did notice you asked for it but its not in the spread sheet.
Also did update the google wallet but I wont post with latest version till I can do a real test out somewhere hopefully tomorrow I will be able to do so.
1Shotwonder said:
Just a note you forgot to add the carrier to the spread sheet not sure if you left out on purpose but did notice you asked for it but its not in the spread sheet.
Click to expand...
Click to collapse
I separated the spreadsheet into tabs. If you look at the tabs on the bottom the carriers will be there. Sorry for any confusion that this created.
Rom: Stock (rooted)
Rom Version: 4.0.4
Baseband Version: UVALJ4
Google Wallet Version: 1.5-r81-v4
Status: Working
Extra 1: SGS3-TW-US_variants-lib_nfc-fix
Extra 2:
Build prop: (used htc_jewel, then reverted back to stock)
Notes: Changed build prop, flashed lib nfc fix, flash wallet, setup wallet, revert build prop back, profit
imaleecher
Added Thanks
DW
Digital_Warrior said:
imaleecher
Added Thanks
DW
Click to expand...
Click to collapse
Carrier: AT&T
ROM: Tasks AOKP Version 10/21
Android Version: 4.1.2
Baseband: I747UCLH1
GW: com.google.android.apps.walletnfcrel.modaco.1.5-r81-v4.zip
Extras: changed model, device, name to "htc_jewel"
Confirmed working (tested at mcdonalds)
same here worked at Sunoco
Sent from my SGH-I747 using Xparent Blue Tapatalk 2
Carrier: TMO
ROM: Wicked V5, ICS (TMO UVALG1 Base)
Base Band: UVLI1
GW version: com.google.android.apps.walletnfcrel.modaco.1.5-r79-v5-2.zip
Extra: SGS3-TW-US_variants-lib&nfc-fix.zip
Build.prop: ro.product.model=Galaxy Nexus/ro.product.name=yakju/ro.product.device=maguro
Notes: Changed build.prop back to stock after successfully adding card, and before rebooting phone.
Notes: Cards added succesfully at google.com/wallet on PC. Working fine.
Carrier: T-Mobile
ROM: Codename Android
ROM Version: 3.6.6
Base Band: T999UVLH2
GW version: 1.5-r79-v5
Extras: None
Build Prop: htc_jewel then back to stock
Notes: 1. Change build prop to htc_jewel (device, name, model) 2. Flash GW 3. Add cards 4. Revert build prop to stock 5. Reboot
Status: Working
AttachedSilver said:
Carrier: T-Mobile
ROM: Codename Android
ROM Version: 3.6.6
Base Band: T99UVLH2
GW version: 1.5-r79-v5
Extras: None
Build Prop: htc_jewel then back to stock
Notes: 1. Change build prop to htc_jewel (device, name, model) 2. Flash GW 3. Add cards 4. Revert build prop to stock 5. Reboot
Status: Working
Click to expand...
Click to collapse
That's Jelly Bean, I had to look, lol.
Carrier : Rogers
ROM: CM10
ROM Version: 10-20121023-NIGHTLY-d2att
Base Band : I747MVLLH1
GW version: Wallet version 1.5-r81-v4
Extras: none
What build.prop you used and if you changed it back to stock: htc_jewel and Galaxy Nexus
Any notes that you feel are relevant.: none
And last but not least DOES IT WORK.: No. Wallet doesn't show up in app drawer unless I defrost using Titanium. I can then open but adding cards fails.
A thank you.
A Thank you to every one above this post.
Your information has been entered into the spreadsheet.
DW
P.S.
Dam Forum can only thank 8 times per day what a rip off.
NEW VERSION GW TESTED:good:
Carrier : T-mobile
ROM: FreeGS3 R6
ROM Version: R6
Base Band : T999UVLH2
GW version: Wallet version 1.5-r81-v4
do as stated in original op for gw and you are set
What build.prop you used and if you changed it back to stock: htc_jewel
Any notes that you feel are relevant.: none
And last but not least DOES IT WORK.: Yes it does work tried it at a McDonald's this afternoon worked fine like previous version of gw.
Dam Forum can only thank 8 times per day what a rip off.
Click to expand...
Click to collapse
Not too long ago it was just five, lol.:silly:
imaleecher said:
Rom: Stock (rooted)
Rom Version: 4.0.4
Baseband Version: UVALJ4
Google Wallet Version: 1.5-r81-v4
Status: Working
Extra 1: SGS3-TW-US_variants-lib_nfc-fix
Extra 2:
Build prop: (used htc_jewel, then reverted back to stock)
Notes: Changed build prop, flashed lib nfc fix, flash wallet, setup wallet, revert build prop back, profit
Click to expand...
Click to collapse
DId you try using it? I have the exact same setup, it adds card sucessfully, but it does not work when I try it in store today (7-11). The card reader does not pick up google wallet.
zengshengliu said:
DId you try using it? I have the exact same setup, it adds card sucessfully, but it does not work when I try it in store today (7-11). The card reader does not pick up google wallet.
Click to expand...
Click to collapse
I'm using it with this setup and its working for me. I tried it at a circle K. did you switch the build prop back?
AttachedSilver said:
I'm using it with this setup and its working for me. I tried it at a circle K. did you switch the build prop back?
Click to expand...
Click to collapse
I did switched the build prop back to the original one.
I odin back to stock, then root, and follow the step to install the nfc fix and wallet, add card, switch back build prop
When I try it on 7-11, I first turn on the wallet, put it on top of the sensor, no response.
zengshengliu said:
I did switched the build prop back to the original one.
I odin back to stock, then root, and follow the step to install the nfc fix and wallet, add card, switch back build prop
When I try it on 7-11, I first turn on the wallet, put it on top of the sensor, no response.
Click to expand...
Click to collapse
I flashed from CM10 to stock Deodexed LJ4. Is your build LH2?
I just followed the instructions of qbking77's video walking through the note toolkit v4.1.0
I have granted access for root and i see the superSU app on my
I have created a backup to my external sd card bc my pc has only 800 mb available.
Now i feel like my next step is to "flash a rom". Is this correct. Which ones can and can't i install. I looked at this labrats bc/ it was popular but it is saying it is 4.1.1 while i am at 4.1.2 for my android version.
My model version is sph-l900
android version 4.1.2
baseband version l900vpamc2
Kernel version
3.0.31-903705
[email protected] #1
smp preempt tue jan 29 17:10:38 kst 2013
Build Number: JZ054K.L900VPAMC2
Hardware Version: L900.09
Can you please tell me what is next. and what is possible and what my next steps are? Thank you.
brett701 said:
I just followed the instructions of qbking77's video walking through the note toolkit v4.1.0
I have granted access for root and i see the superSU app on my
I have created a backup to my external sd card bc my pc has only 800 mb available.
Now i feel like my next step is to "flash a rom". Is this correct. Which ones can and can't i install. I looked at this labrats bc/ it was popular but it is saying it is 4.1.1 while i am at 4.1.2 for my android version.
My model version is sph-l900
android version 4.1.2
baseband version l900vpamc2
Kernel version
3.0.31-903705
[email protected] #1
smp preempt tue jan 29 17:10:38 kst 2013
Build Number: JZ054K.L900VPAMC2
Hardware Version: L900.09
Can you please tell me what is next. and what is possible and what my next steps are? Thank you.
Click to expand...
Click to collapse
To my understanding, 4.1.2 allows home screen rotation and minor performance enhancing (i may be wrong) but if you flash a rom and it puts you on 4.1.1 its not a big deal as there are mods you can flash that will enable that option and it's actually built in to some roms. There's tw (touchwiz) roms and there's aosp roms, I suggest you do your research about the difference between the two before flashing either and of course make a backup before flashing anything in case something goes wrong. I also suggest no matter what rom you flash read the OP and at least the first and last 10 pages of that thread, that will give you a good idea as to what issues users have ran into and most likely the fix. Im no expert by any means and I do more reading than posting because just about any question i have has been asked and answered already. You can't go wrong with any tw rom and they all have different mods/tweaks...nothing wrong with trying them all...and the developers are incredible and more than willing to help you out (users are too) as long as you did your part in trying to find the answer your looking for before posting in they're threads. I can't say much for aosp because I stick with tw but I'm sure the devs/users there would help out as well. I can't stress enough about doing your research before flashing anything and always make a backup first. You had a successful root so your off to a good start, good luck man :thumbup:
Hi All.
I am new to XDA so please be gentle and I need some help.
I have a GROM V-Line system installed and it has been giving me hell these last 11 months and I am unable to get a refund from the buyer. It is android powered and uses a custom rom etc. I was wondering if anyone out there has any knowledge of these units and can guide me through a way to maybe update the system to remove custom ROMs so I can use it as a normal android type device.
The current set up is running on Android 5.1.1
Kernel version: 3.10.0 [email protected] #11
Build number: Lite_VL1.6.0.0
Not sure if there is anything I could, I am ready for throwing this out of my motor now.
Please help.
Ta
Kanjar2020 said:
Hi All.
I am new to XDA so please be gentle and I need some help.
I have a GROM V-Line system installed and it has been giving me hell these last 11 months and I am unable to get a refund from the buyer. It is android powered and uses a custom rom etc. I was wondering if anyone out there has any knowledge of these units and can guide me through a way to maybe update the system to remove custom ROMs so I can use it as a normal android type device.
The current set up is running on Android 5.1.1
Kernel version: 3.10.0 [email protected] #11
Build number: Lite_VL1.6.0.0
Not sure if there is anything I could, I am ready for throwing this out of my motor now.
Please help.
Ta
Click to expand...
Click to collapse
Hi Ta,
I installed the Vline VL2 in my Lexus two weeks ago and initially had issues.
Here's my versions out of the box.
System update is Android 8.1 with last security patch dated Jan 5, 2019 and won't update further.
Kernel: (gcc version 6.3.q 20170404 (Linaro GCC 6.3-2017.05))
[email protected] #3
Fri Mar 19 05:27:15 PDT 2021
Vline shows VCore: V20VL3.37.0.0
VBase: 32.38 (L22)
No further updates available.
DashLinq version: 5.5.2.5
Knob Helper version: 1.0
WebView Shell version: 1.0
---
I was initially pissed too but after several resets my system is pretty stable.
One item that remains an issue is crashing when I have any SD card installed...As long as no SD card installed then system runs pretty good.
Several issues via launch controller were fixed with a $1.99 replacement launcher named AGAMA by altercars.ru. https://altercars.ru/#about