I woke up today to a bootloop. After pulling out the battery, I cant turn it on, it was stuck at the google logo. I thought it was some rom issue or something. When I had the time, in the afternoon, I just boot to recovery, and wiped data+sd card. Turns out sd card was not wiped.
Just now, I found a way to boot it. (AFTER WIPING DATA) I used the gnex toolkit and boot with insecure image, and guess wat? My old rom boots. Everything was the way it was, and then it crashed and stuck on the google logo again.(I made sure i wiped things two to three times, data and sd) I did a few experiments:
1) Flash using ODIN
2) Flash CWM using toolkit--it changed back to twrp after reboot
3) Changing the icon on my homescreen after boot--- everything was the same again after booting
4) Flash stock image using toolkit
5) Wipe data using manual adb
6) Try to lock my bootloader
NO ONE?????
ODIN --> Flash Stock Recovery (AP) with NAND Erase All Option Checked (because it seemed to make sense) + Auto Reboot + F. Time Reset --> Reboots to Stock Recovery (did not work before) --> Reboot into Recovery --> Wipe Data/Cache and Dalvik just to be safe (this crashed it before) --> Reboot. THE END
TL/DR: I am currently stuck on recovery/update mode. Any attempt to wipe data or clear dalvik crashes it. any attempt to access data through TWRP crashes it. Flashing stock rom or custom rom does not help. Somethings wrong with /data? It thinks it has root from the CF Auto Root, but does not really? Something wrong with partitions? Should I wipe the nand with ODIN 3.10? Repartition? ugh ... Please help ...
I have searched the forums and found nothing that describes this issue precisely. I have also tried to apply various suggestions to repair, which, for the most part seems to have made it worse. I am hoping that people still look at this forum.
PC - Windows 7
Initially @4.2.2 ---> Touchwiz debloated stock ROM which I rooted. It worked for a couple years, but the device crashed frequently. I do not recall much about the installation, but believe that I used CWM/TWRP at the time. After installing the ROM, I ran triangle away (out of the box, it had 4.1.2, i recall)
I decided to upgrade to the most recent stock ROM (4.4.2). In order to do so, I used an easy installer I found else where on XDA. (http://forum.xda-developers.com/showthread.php?t=2773712 ---ODIN One Click exe). The device was not initially recognized, so I reinstalled the official driver package (said that they already existed, but I installed again anyway). Ran 1-click and it appeared to work.
Initially, the device booted (long startup) and seemed to function. It also preserved all data and programs (presumably did not touch the internal memory - 16 GB) and possibly root /data.
I then tried to root through most recent ODIN with CF auto root. This appeared to work and rebooted (again, showing the updating android apps screen before fully booting).
The only thing that i could find that had changed was the wallpaper (showed on lock screen but not on home screen). I could no longer find the image, so tried to go to /data/data to find it with root explorer equivalent. This is where it started to act weird.
NOTE: I did not clear anything (system cache, etc. at any point)<--a lie (see below)
It showed the root folder fine, but when I clicked on /data it took a while and could not access it. It either rebooted itself or I rebooted, but this time it was stuck in a boot logo loop. I entered download mode and flashed TWRP through ODIN. I set it to not reboot automatically so that the bootloader was not overwritten automatically (thus losing recovery). TWRP came up. The computer recognized it as a Media Device after I mounted USB storage. Just in case, I copied all of the important files from the internal SD Card to my computer. I then tried to go to the file explorer to copy the wall paper and it forced a reboot. At this point it was stuck on a logo screen boot loop again. I was able to enter Download mode and reflash TWRP. This allowed me to enter recovery again, however, now it would only boot directly into recovery (or Download mode if I did the button combo). The interesting thing was that it would reboot two or three times before successfully entering TWRP.
I believe I tried to reflash the stock ROM at this point, which might have worked but made no difference.
I was also having a lot of problems getting Windows to properly recognize the device. I had to reinstall the drivers a couple times. I tried Kies after the problems started and it tried to connect by failed. The diagnose connection did not work either. I was not able to get Kies to connect though I tried several times throughout the attempted repair
I downloaded a stock-rooted 4.4.2 ROM from here and tried to flash it. It failed.
I also tried to flash via Heimdall, but initially could not find any stock ROMs for Heimdall for the Galaxy 8. (The driver utility that is included helped to get the phone recognized by Windows sporadically).
I decided to switch over to CWM touch recovery, which I flashed via ODIN (I was having issues with TWRP again and also could not get windows to recognize the device as a media device when I mounted USB storage). This worked after a couple tries and I was able to enter CWM. I attempted to flash the stock ROM but it failed. Either at that point or when I tried to mount data it returned an error that device did not have root. Again, it would only boot into CWM (on its own) or Download mode (with key combo). At some point around here I cleared the cache and dalvik (error) after it returned an error saying insufficient space when trying to flash ROM.
I dissected the .exe from the autoflash used in the beginning (stock unrooted 4.4.2) and used the contents (system.img, cache.img, hidden.img, tz.img, recovery.img and one other I do not remember) in Heimdall to create a Heimdall package. At this point I figured out I did not need to create the package, but just specify the individual files. I flashed. It appeared to complete System.img successfully and then failed. Tried again with the same result.
Now when I rebooted, it would enter download mode with the Key combo, but otherwise it booted instantly to an error screen to the effect that a firmware installation had failed and to use the repair function in Kies to fix. Kies still did not recognize it.
At this point, I figured I should stop. Currently I can get to the download screen or the error screen. The computer recognizes it but intermittently fails to install driver. Zadig.exe sees it as Gadget Serial. Sometimes Windows just sees it as SAMSUNG_Android, in which case drivers fail. Once or twice I got it to recognize it as Samsung USB Composite Device, but Kies would still not work.
That's all i have for now. If more information is needed, let me know and I will update the post when I get home from work tonight (this is from memory).
Thank you
UPDATE: last night I went home and was able to get it back to the point where I could flash TWRP or CWM recovery. If I try to flash Stock Recovery, it fails. A minor problem is that I cannot turn it off - it just turns it self on again, so the battery keeps running down.
Hi everyone of you savior angels,
after rebooting form TWRP (3.2.1-0) following today's lineageos ota update, my phone boots: 1st/2 boot logo sequence, asks me once (out of two) for the pin code, 2/2 boot logo sequence and then after some time , 30 sec maybe, the screen blacks out and it restart into recovery mode. There, it now says "RescueParty" once I have entered the password.
I have tried to let it cool, to wipe Dalvik and Cache, and Factory Reset. Still the same. I can not find the downloaded files form the update.
I am at work now and do not have access to my usb cable.
Any thing you could recommend?
cheers
Got it!
pepite_ said:
Hi everyone of you savior angels,
after rebooting form TWRP (3.2.1-0) following today's lineageos ota update, my phone boots: 1st/2 boot logo sequence, asks me once (out of two) for the pin code, 2/2 boot logo sequence and then after some time , 30 sec maybe, the screen blacks out and it restart into recovery mode. There, it now says "RescueParty" once I have entered the password.
I have tried to let it cool, to wipe Dalvik and Cache, and Factory Reset. Still the same. I can not find the downloaded files form the update.
I am at work now and do not have access to my usb cable.
Any thing you could recommend?
cheers
Click to expand...
Click to collapse
Ok so I tried a few things.
While in recovery I could access the internal storage through my computer. First I copied all the pictures and good stuff. Then I sent to the phone a freshly downloaded latest version of LineageOS (released today). Unplugged the brick, installed the system through TWRP, rebooted. Same crap.
Thing I noticed is that if plugged on the computer or on the power adaptor, the phone would not reboot into recovery, but would stay in the second loop sequence, seemingly for ever? At least for 30 min+
Then I did the same with the previous LineageOS (last week's). Same troubles.
Right. This starts to sound like a clean wipe. So I did that. For the science, I installed the newest LineageOS version (the one that initiated the problem it seemed). Then latest openGapps. And bam! It worked!
Need to reinstall all the crap now.
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
mkohan said:
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Click to expand...
Click to collapse
I'm new to this phone as well (but not to Android). Try the following:
Download TWRP from here -> https://androidfilehost.com/?fid=6006931924117884758
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip from here -> https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Power off phone. Hold down volume down and power button to boot into fastboot
Give the command fastboot flash recovery twrp-3.3.1-1-whyred.img to flash the recovery you downloaded earlier.
Boot into recovery
Flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip that you downloaded earlier
The above steps will at least ensure that you retain TWRP and it doesn't get overwritten by stock MIUI recovery
After that, check whether or not your phone/ROM has anti-rollback enabled and take appropriate steps accordingly.
Ok so i flashed PE 10 plus today and was met with the same problem.
Heres how i solved it
Goto fastboot option by pressing volume down and power button
Connect to pc (If it doesnt recognize, reinstall Adb drivers and phone drivers)
If it asks for decryption password just press cancel
Wipe data/internal/vendor (wont be able to wipe dalvik as it wont mount)
Flash PE 10 Plus and nothing else.
It should boot just fine.
However i run into bootloop if i flash latest magisk so i cant root my phone :/
Hope this helps
mkohan said:
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
Click to expand...
Click to collapse
hey read your post
actually adb and fastboot are two different things.
and recovery is flashed using fastboot commands not adb.
sometimes if a rom is not booting it may have issues with encryption.
I'm trying to install LineageOS 17 on a OnePlus 6.
I can boot into twrp and the install process appears to work successfully. I can swap slots and install into either slot.
When I reboot the phone I get to the screen that says "Start" and "Fastboot mode" at the top. If I try to start the phone it comes back to this screen. When I go back into twrp, the contents of /sdcard is empty. I can copy over files using adb push, install the rom and then reboot. However, every time I reboot it seems like it completely wipes the phone including the install it's just done and /sdcard is also wiped.
When I booted into twrp previously, it required my unlock code. It now no longer does that. I wonder if this is part of the problem?
If I install just oxygenos, it takes me to the oxgenos recovery screen but I cant' do anything from there. I'm guessing that won't allow me to boot with an unlocked bootloader?
Can anyone advise how I can get out of this? Installing anything using twrp looks like it works, but it's like it gets wiped every time I reboot.
I can't even seem to get OxygenOS back to working.
Can anyone give me some tips on where to go from here? Nothing I can do from TWRP seems to help. I have tried wiping everything in both slots and reinstalling oxygen, no luck
Still stuck?