Related
Hello everyone,
yesterday I flashed a new Cyanogenmod 14 nightly (12062016) for my G4 from earlier nightly in TWRP. After reboot the phone keeps going back to TWRP and I can't seem to get it to boot to system..
I tried factory reset, reflashing back to old nightly, flashing stock.. but nothing seems to work.
Also tried doing this in the TWRP terminal:
dd[space]if=/dev/zero[space]of=/dev/block/platform/f9824900.sdhci/by-name/fota
Didn't fix the loop, I guess because it wasn't the OTA update that caused the problem in the first place.
If anyone has an idea, I would greatly appreciate the help!
Thanks.
If you can reach download mode you could try reflashing back to stock then starting again.....Hope you get yours fixed - Sorry to say this but mine did a very similar thing only 24 hours before you posted!!! Only mine was on stock FW and was in use at the time - I've now had to swap it as valuebasket who sold me the phone have ceased trading. If yours is a UK model you may be able to get it replaced under warranty - believe that LG guarantee their phones for 2 years and a ruling by the European court said that flashing a custom rom doesn't invalidate any warranties.
I have the same exact issue, I also flashed the latest CM14 nightly and cannot get the device to boot any rom.
I have even tried flashing stock rom but I get the same problem.
From what I have read, the bootloop issue happens once the device boots but I don't seem to be getting that far.
Any ideas?
Ran into the same problem 3 days ago. This is the first time I have encountered a non-revertible issue in 3 years as a cyanogenmod user. This changes my opinion on how safe it is to make use of a custom ROM. I tried to wipe everything, reinstall TWRP, change TWRP with another recovery, reinstall a safe NAND backup of mine.....nothing.....it went into boot loop. Before I read this post, I was convinced my phone encountered the infamous G4 bootloop problem.....now I see there are other examples, so it shouldn't be the case. Long story short, I had to check my device in at the LG assistance, with 25 days as time forecast.
The guilty nightly was 20161205.
I have never seen anything like this...
This has solved it for me - I installed LG Bridge and flashed the factory firmware using the tool. Now it seems I'm back on stock but at least it's working.
got mine working. I had to install LGUP and flash stock ROM. Once flashed I installed CM14 and I am back up and running again.
I tried LGUP but it could not recognize the device while this was looping.....a bad experience......
I have the same issue. My phone was updated to 20i via the original stock firmware, then I put twrp 3.0.2-0 and cyanogenmod on. I did a cyanogenmod update from within cyanogenmod, which just booted into twrp, then I manually installed the update zip that cyanogenmod had downloaded, then it always boots into twrp. I wonder if initiating the update from within cyanogenmod was the cause. The phone is not detected by LGUP or LG Bridge. I've tried this on a win10 machine, and a win7 vm from linux. I have access to twrp, and download mode by doing the reboot into bootloader from within twrp.
If those people who have fixed this could give more details about how they did it, that would be good. What exact steps did you take? What stock firmware version did you have before installing a custom rom? What OS version were you using? What twrp version?
Well. Mine got stuck in bootloop for the second time today. What is going on? In between the two bootloops I had one good update with CM. Using TWRP 3.0.2.1. Steps to reproduce failure: updating CM from within CM, it autoreboots into TWRP and after that nothing happends, no autoinstall. Then after a manual install of the new CM the bootloop starts.
Resolve the problem:
* Install LGUP 8994 DLL Ver 0 0 3 23, Install LGUP Install Ver 1 14, get the latest KDZ
* Get the phone into download mode with usb cable and after that in firmware update mode
* Startup LGUP and choose refurbish and select the kdz file.
* After that you can boot into your stock LG firmware again, reinstall TWRP an CM. If you want so.
Read that it is advised to manual update cm from within TWRP. TWRP will get an update in the future to solve this bootloop problem.
iankelling said:
I have the same issue. My phone was updated to 20i via the original stock firmware, then I put twrp 3.0.2-0 and cyanogenmod on. After a cyanogenmod update, it always boots into twrp. The phone is not detected by LGUP or LG Bridge. I've tried this on a win10 machine, and a win7 vm from linux. I have access to twrp, and download mode by doing the reboot into bootloader from within twrp.
If those people who have fixed this could give more details about how they did it, that would be good. What exact steps did you take? What stock firmware version did you have before installing a custom rom? What OS version were you using? What twrp version?
Click to expand...
Click to collapse
I second that. Same issue and neither LG Up nor LG Bridge will recognize my device. Looking in device manager there are no serial interfaces. Do I need a special driver that provides a com port for a phone in recovery or fastboot mode?
---Edith 2016-12-12: Found a solution for my issue:
The phone has to be in _download_ mode, not in recovery or fastboot. After realizing that I have to boot the phone in a different manner, it will be recognized by LG UP.
Here is how to boot the pone in download-mode:
- Power off your LG device.
- Press and hold Volume Up button.
- Connect your device to PC with a USB cable while holding the Volume Up button.
- You’ll boot into download mode with “Firmware Update” written on top of the screen.
Now everything is fine again.
croclacrimae said:
Hello everyone,
yesterday I flashed a new Cyanogenmod 14 nightly (12062016) for my G4 from earlier nightly in TWRP. After reboot the phone keeps going back to TWRP and I can't seem to get it to boot to system..
I tried factory reset, reflashing back to old nightly, flashing stock.. but nothing seems to work.
Also tried doing this in the TWRP terminal:
dd[space]if=/dev/zero[space]of=/dev/block/platform/f9824900.sdhci/by-name/fota
Didn't fix the loop, I guess because it wasn't the OTA update that caused the problem in the first place.
If anyone has an idea, I would greatly appreciate the help!
Thanks.
Click to expand...
Click to collapse
I was able to get out of that by also wiping by-name/misc. Don't do that, though, because then your wifi mac address will get messed up and you'll spend all day looking for a permanent fix for that.
I suggest reflashing a stock KDZ using LGUP, as others have said. You can get the usb drivers from LG Bridge.
I will release a fix for that soon. Check the twrp thread for updates on this.
Hi
I also have this problem
I installed cm-14.1-20161201-NIGHTLY-h815 successfully and was running it for almost 2 weeks without issues, today I updated to cm-14.1-20161213-NIGHTLY-h815 from cmupdater and I have been ending up in recovery every time I rebooted.
I tried flashing the latest cm recovery and reflashing the rom, with full wipes but no luck.
Full steps of recovering would be appreciated (for example, there are comments about flashing the latest stock rom, but a link to this rom would be helpful)
Thanks
Good news regarding this:
http://forum.xda-developers.com/showpost.php?p=70082901&postcount=213
The above will fix TWRP bootloop issues as well and I also released a first h811 version which should allow installing CM etc as it should.
Keep in mind that this is a BETA and not an official TWRP release.
Please report back in the above thread!
.
Does your twrp beta really fix the boot loop even it is already happening. What do I have to wipe? I have not managed to get out of the boot loop despite intalling it.
Is using using LG Up to flash to the stock rom really the only option?
Edited 2017-01-25 2:45 pm:
Well, sometimes you just have to be patient. Powered down the phone and when th H815 restarted CM did boot. Great. :good:
Hey, I just want to share a small detail, possibly a fluke that helped me overcome the bootloop.
So...I started with a fresh, stock H815, I don't quite remember the firmware version..it was something like version "20g"..
OK, I looked up several guides and tried to get the newest stable versions of each tool. I went through with the official bootloader unlock, then moved on to rooting: Kingroot didn't work for me so I went on installing twrp in fastboot mode so I could afterwards install supersu and root.
I got there eventually but first I was stuck in bootloop - kept ending up in twrp interface. I found the 2 dd commands but those didn't work for me as the msm_sdcc folder did not exist, but instead there was a "f9824900.sdhci". Tried to overwrite this one ...but as others have stated as well, it didn't work.
At that point, I had nothing to lose, I was starting to accept that I had soft-bricked my precious G4 so..I went on installing the DU 10.6 7.1.1 rom and the stock gapps, wiped dalvik, rebooted and held my breath...not literally
About 12 minutes later, after an endless red, spinning logo, my shiny ping pong paddle showed me a different screen, a fresh start welcome screen .
Almost 24h / 10-12 reboots (twrp included) / 70+ apps installed and removed later, the new OS holds around 2G ram average, a bit better battery life, smoother transitions, flawless navigation, flush streaming over both 3G/LTE & 2.4/5 G wifi.
FYI the reboots were intended, wanted to see consistency in boots - we're in the green . Now testing long term stability with moderate/high usage.
There is 1 aspect I noticed, there are a couple of contexts when the interface burps (several menus, various situations, never in apps) and resets back to homescreen...but I think that's more of a launcher topic than an OS one.
Other than that, so far I'm happy with the mod.
Hope my experience helps others that might be in the same spot I was or at lest boosts their confidence to try out a decent idea they might be pondering.
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work
emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!
Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE
Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!
It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!
Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk
Hello members of XDA,
The issue I'm having is pretty rare and found few or non threads about it, so I will try to be the most precise possible.
Yesterday I decided to change the ROM of my LG G4 H815, I was previously on LineageOS, since LineageOS on H815 wasn't developped anymore. So I asked myself why not trying Android Oreo with CypherOS. Before any changes I was with the latest version of LineageOS for H815 and I had TWRP with the version 3.0.2.1. Bootloader was obviously unlocked.
So I starded to download all the required material to switch to CypherOS 5.3.1, while the download I've made a backup of my actual lineageOS installation on my internal storage. Once every thing was downloaded I tried to install CypherOS I had an error 7 in TWRP install box, so I was pretty worried, scouted XDA threads about the error but i was redirected to the solution where you modify the update binary with txt but still didnt worked. I've found a thread talking about updating firmware of the H815 ( https://forum.xda-developers.com/g4/development/v5-8-5-n7-1-2-resurrection-remix-t3704450) While panicking I've done a wipe of everything (dalvik, data,cache and system) .I applied thge firmware update but I also re-read the thread of CypherOS and figured that I needed a newer version of TWRP, installed it so. THen magically CypherOS installed without any issue.
After installing the Gapps (Arm64 8.1 Nano) I rebooted and the first weird thing appears, after seeing the LG screen while the boot I have another screen telling me that the bootloader has been locked and that i should visit g.co/ABH for more information, then CypherOS initialise, CypherOS worked like a charm. So I wanted to go to my TWRP and make a backup in case. I launched ADB and use the command adb reboot recovery, the phone restarted and had the following events : LG logo, warning message about the bootloader, LG logo again and then a black screen. However I was in recovery mode since adb found me with the command fastboot devices. I had no TWRP logo or anything linked to it. Few minutes later, I had the basic recovery mode where you move yourself with the volume buttons and select with power where the functions are pretty limited.
Then I rebooted the phone with adb (fastboot reboot), CypherOS still working perfectly. Thaught that it was the bootloader which back to scratch when he was blocked, I figured out that he was still unlocked, I used the command "fastboot getvar unlocked" through ADB. THen I thaught i had to install back TWRP, tried through the fastboot mode but I had an error
Code:
FAILED (remote: unkown command)
since i tried everything i could even in the basic recovery mode, the only working command in the recovery is "fastboot flash recovery twrp.img" but still does nothing.
I mean it's not that terrible since I can use my phone and i'm about to change phone in 2 months for a Oneplus but i would really like to be able to install magisk on the phone to grant root access and be able to use TWRP on it like I used to. By the way the backup of lineageOS has been deleted while performing unecessary wipes.
Bennou said:
Hello members of XDA,
The issue I'm having is pretty rare and found few or non threads about it, so I will try to be the most precise possible.
Yesterday I decided to change the ROM of my LG G4 H815, I was previously on LineageOS, since LineageOS on H815 wasn't developped anymore. So I asked myself why not trying Android Oreo with CypherOS. Before any changes I was with the latest version of LineageOS for H815 and I had TWRP with the version 3.0.2.1. Bootloader was obviously unlocked.
So I starded to download all the required material to switch to CypherOS 5.3.1, while the download I've made a backup of my actual lineageOS installation on my internal storage. Once every thing was downloaded I tried to install CypherOS I had an error 7 in TWRP install box, so I was pretty worried, scouted XDA threads about the error but i was redirected to the solution where you modify the update binary with txt but still didnt worked. I've found a thread talking about updating firmware of the H815 ( https://forum.xda-developers.com/g4/development/v5-8-5-n7-1-2-resurrection-remix-t3704450) While panicking I've done a wipe of everything (dalvik, data,cache and system) .I applied thge firmware update but I also re-read the thread of CypherOS and figured that I needed a newer version of TWRP, installed it so. THen magically CypherOS installed without any issue.
After installing the Gapps (Arm64 8.1 Nano) I rebooted and the first weird thing appears, after seeing the LG screen while the boot I have another screen telling me that the bootloader has been locked and that i should visit g.co/ABH for more information, then CypherOS initialise, CypherOS worked like a charm. So I wanted to go to my TWRP and make a backup in case. I launched ADB and use the command adb reboot recovery, the phone restarted and had the following events : LG logo, warning message about the bootloader, LG logo again and then a black screen. However I was in recovery mode since adb found me with the command fastboot devices. I had no TWRP logo or anything linked to it. Few minutes later, I had the basic recovery mode where you move yourself with the volume buttons and select with power where the functions are pretty limited.
Then I rebooted the phone with adb (fastboot reboot), CypherOS still working perfectly. Thaught that it was the bootloader which back to scratch when he was blocked, I figured out that he was still unlocked, I used the command "fastboot getvar unlocked" through ADB. THen I thaught i had to install back TWRP, tried through the fastboot mode but I had an error since i tried everything i could even in the basic recovery mode, the only working command in the recovery is "fastboot flash recovery twrp.img" but still does nothing.
I mean it's not that terrible since I can use my phone and i'm about to change phone in 2 months for a Oneplus but i would really like to be able to install magisk on the phone to grant root access and be able to use TWRP on it like I used to. By the way the backup of lineageOS has been deleted while performing unecessary wipes.
Click to expand...
Click to collapse
It's clearly written on the official website and in the official TWRP support thread for the g4 what you have to do when on Nougat bootloader and want to flash TWRP... and keeping it.
Sent from my LG-H815 using XDA Labs
Yet, this still doesnt help me to solve my issue. Do you think there is a way to fix it or no ? If not, I'll just deal with it for the few months lasting.
Bennou said:
Yet, this still doesnt help me to solve my issue. Do you think there is a way to fix it or no ? If not, I'll just deal with it for the few months lasting.
Click to expand...
Click to collapse
Okay if it doesn't work for you you must do something wrong. It works 100%. If you really want help you should explain in detail exactly which steps you took as otherwise it's all just guessing what you're doing.
Sent from my LG-H815 using XDA Labs
Indeed, I didn't followed the procedure exactly, didn't do the step after flashing TWRP (removing battery and boot manually to recovery). Well thank you, was my bad on that.
Should I do a clean new install of cypheros or should I keep it like that, what would be your advice ? Knowing that at the moment CypherOS works like a charm. I also plan to install Magisk on it to root it.
To help others newbie like me, solution can be found here : https://forum.xda-developers.com/g4/development/recovery-twrp-3-touch-recovery-t3442424
Hi everybody,
I try to root my Blackview BV9500 by installing first TWRP recovery. I use fastboot mode on a linux laptop to do that.
I successfully flash the twrp recovery image, but after that, the phone don't boot in recovery anymore.
It try to boot into recovery, but it reboot in normal mode a few second after.
I tried also with the cmd "fastboot boot recovery.img".
When i flash back the original recovery image, it work, i can boot the original recovery without any problem.
Does anyone have the problem?
Some one can help me to find a solution?
I, too, am trying to do this. I have not yet flashed it... I was going to use the fastboot boot command to boot the recovery kernel before permanently flashing it, to make sure it would work, and in my googling I stumbled across this post. Serendipity! [Edit 3: Although, reading your post again, I see you tried that as well and it didn't succeed for you. For me, it simply tells me remote: command not found, so how were you able to even get that to work?]
All that said... I have the BV9500 Pro, specifically for the two-way radio, so I'm going to try to keep that little tidbit of hardware working in the process. I mainly just want to tweak the menus a bit, tweak the quick settings, get root, delete the Google crapps I won't be using...
On to your problem, though, I can't help much but maybe if we post back and forth our successes and failures we might be able to stumble through it together?
First, I assume you already have unlocked your bootloader? [Edit: Honestly, I'm not sure flashing the recovery would be allowed without first unlocking the bootloader]
[Edit 2: Perhaps this thread might be of help. Different model, but often the hardwares used by manufacturers are similar enough that the same steps generally work. ]
Thank you for the link, maybe i need to flash the complete rom with the twrp recovery with spflash tools, and it will work.
I will try and let you know, but i will make a backup of my rom before flashing it!
For your problem with fastboot, maybee it's because you need to install it. You can use the command "sudo apt-get install fastboot" on a terminal window if you are on linux.
If you want to enter the recovery mode, you don't need to use fastboot, you can simply enter it by pressing Volume Up and Power buttons together for a couple of seconds when your phone is off.
When Boot Mode appears release all keys.
To flash recovery with fastboot, you need first to enable the developer mode on your phone (go to "Settings > About phone" and make 7th tap on the build number, the Developer options will be unlocked and available), and unlock the bootloader of course.
here what is the process i made to flash the recovery :
- i use the command "adb devices" to check if the phone is well connected. (response is like "BV9500S320001179 device")
- then i enter in fastboot mode with "adb reboot bootloader" (phone reboot and ask confirmation for fastboot mode)
- check with command "fastboot devices"
- unlock the bootloader with the command "fastboot oem unlock" or "fastboot flashing unlock".
- flash the phone with the twrp recovery with "fastboot flash recovery recovery.img"
- reboot the phone in recovery mode with "fastboot boot recovery.img"
Normally the phone boot in twrp recovery.
Hope that will help you too.
I am too facing this problem. In case you got any solutions please let me know too.
Yves596 said:
For your problem with fastboot, maybee it's because you need to install it. You can use the command "sudo apt-get install fastboot" on a terminal window if you are on linux.
Click to expand...
Click to collapse
Yup. Already had fastboot installed for the LG G5 this phone replaced, the Galaxy Note 4 the LG replaced, the MyTouch 4G Slide the Galaxy replaced, my wife's old Galaxy S5 I used in the interims... LOL, I've got a working install. No, the "Remote: command not found" was returned from within.... Whether fastboot or adb, I forget now, but I was able to get the file to flash eventually, after reading your first post, but unfortunately the phone would not boot to it (nor Android). I thought I'd bricked it. Twice this happened. Each time, after about 5 minutes, it eventually booted to Android.
I flashed the recovery from the ROM in the link Blackview sent me and was able to boot their recovery just fine, so there's something in the TWRP that my particular phone doesn't like.
If you want to enter the recovery mode, you don't need to use fastboot, you can simply enter it by pressing Volume Up and Power buttons together for a couple of seconds when your phone is off.
When Boot Mode appears release all keys.
Click to expand...
Click to collapse
Thanks, I keep forgetting which keys to hold for recovery versus bootloader, so I use the adb command to be sure without having to keep a notepad nearby.
Clearly I don't do this as often as I used to.
(snip)
- flash the phone with the twrp recovery with "fastboot flash recovery recovery.img"
- reboot the phone in recovery mode with "fastboot boot recovery.img"
Normally the phone boot in twrp recovery.
Hope that will help you too.
Click to expand...
Click to collapse
Now that was something I haven't done since the T-Mobile G1 days. My understanding was that you CAN boot a recovery without flashing it first if you"fastboot boot {image filename}" but that didn't work for me either. I'm also assuming that the filename to flash can be anything because the device stores it to a partition, so it shouldn't have to be specifically "recovery-verified.img".
The recovery you have... Were you ever able to boot to it? If so, would you be willing to share a link to its download source, please?
I've got to run for a prior engagement, I'll check back later.
Thanks!
veronicadavis said:
I am too facing this problem. In case you got any solutions please let me know too.
Click to expand...
Click to collapse
I guess i find the reason why the modified recovery image won't boot.
I find an interesting information in a post of osm0sis (https://forum.xda-developers.com/showthread.php?t=2073775) were he say : "some newer MediaTek (MTK) devices use special image signing that adds a "BFBF" pre-header signature, so images will unpack/repack but most likely won't boot unless run through their internal signing tool."
After more search, i find an interesting publication (http://www.lieberbiber.de/2015/07/04/mediatek-details-partitions-and-preloader/) witch confirm that.
They say in conclusion of the publication :
"Yes, I can confirm that SignTool is able to add digital signature information to firmware images. Signed images have an additional header “BFBF” and some fluff which SP Flash Tool checks on a secure device. Apparently some manufacturers merely used the default MTK key for signing the images, making them no better off than a typical insecure MTK device."
So we have to find another way to install magisk to root it.
Root 9500/pro
Mine rooted already....you guys can check on 4pda russian forum
Note : do not use the 17.1 version of magisk there because after reboot the device will freeze if you resboot after twrp 1st install...instead flash 17.3+ or 18+ right after first install of twrp...
EDIT : dont mind the russian language in TWRP as you can change it to english once there
Yves596 said:
Hi everybody,
I try to root my Blackview BV9500 by installing first TWRP recovery. I use fastboot mode on a linux laptop to do that.
I successfully flash the twrp recovery image, but after that, the phone don't boot in recovery anymore.
It try to boot into recovery, but it reboot in normal mode a few second after.
I tried also with the cmd "fastboot boot recovery.img".
When i flash back the original recovery image, it work, i can boot the original recovery without any problem.
Does anyone have the problem?
Some one can help me to find a solution?
Click to expand...
Click to collapse
Hello I have same problem... Do you have that original recovery file? I don't have and I would like to get that back. Thanks.
DL this:
needrom. com/ download/bv9500pro- bv9500-root/ (delete spaces)
- Copy Magisk-v18.0.zip and disable_encryption_9500.zip to external SD-Card or OTG device
- backup your data from internal SD-Card
- do a factory reset and turn off phone without entering the setup guide after reboot, or wipe via recovery and power off
- Flash recovery.img using scatter.txt with SP Flash Tool
- boot into recovery with hold down vol + and power
- switch TWRP to your language and install Magisk-v18.0.zip and disable_encryption.zip
- reboot and update or install MagiskManager-v6.1.0.apk
Thanks to Jemmini from 4pda.ru
kanadali said:
DL this:
needrom. com/ download/bv9500pro- bv9500-root/ (delete spaces)
- Copy Magisk-v18.0.zip and disable_encryption_9500.zip to external SD-Card or OTG device
- backup your data from internal SD-Card
- do a factory reset and turn off phone without entering the setup guide after reboot, or wipe via recovery and power off
- Flash recovery.img using scatter.txt with SP Flash Tool
- boot into recovery with hold down vol + and power
- switch TWRP to your language and install Magisk-v18.0.zip and disable_encryption.zip
- reboot and update or install MagiskManager-v6.1.0.apk
Thanks to Jemmini from 4pda.ru
Click to expand...
Click to collapse
Thank you for your help and Jemmini help too, it work fine.
But on the firmware version 20180629.
Yves596 said:
Thank you for your help and Jemmini help too, it work fine.
But on the firmware version 20180629.
Click to expand...
Click to collapse
you can just download latest firmware and simply backup NVRAM etc with sp flash tool also flash with sp tool, you will have then working twrp with disabled encryption. there are tons of post regarding using sp flash tool on this forum
im using same phone and did these actions on first day and did not have any problem with twrp or magisk
Hi,
I've bought this phone in Pro version. I rooted my phone using needrom.com/download/bv9500pro-bv9500-root/ and adb after unlocking bootloader. Then I failed with errors. Then I used SPFlashTool in root mode with official 2018092919_s32v63c2k_jk_pro.rar rom (I don't find it anymore on the net but 1) I got it on Blackview official forum and 2) I have the file on my own PC) with format+Download and replace recovery with TWRP from Jemmini from 4pda.ru before flashing. OK.
Then I rooted again: format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally.
Beware: TWRP is in Russian language at first boot, so to get it in English, first slide the first slide (allowing writing), then select 'Настройки', then the globe on top, then English, then 'Установитъ Язык'.
Hope this helps.
Then, this is my first rooted phone, so I plan to make a custom rom without Gapps (then maybe without Mediatek Ones and agold too) and remake all functionning with apps from Fdroid. Help needed on a manner of removing a system/vendor app properly. Help needed too to add V4A, as I could see max version supported is Nougat. I announce this here as my first post, but my project will be a full post. If someone want help please ask here or MP me
Note: an update of magisk is out (official 18.1), I installed it and my phone tells me a message that facial recognition was not working anymore then it only boots on TWRP... I reflashed it and my phone boots normally again. Wait and see...
Thanks to Jemmini from 4pda.ru again.
Bests Regards
nr0000000 said:
Hi,
I've bought this phone in Pro version. I rooted my phone using needrom.com/download/bv9500pro-bv9500-root/ and adb after unlocking bootloader. Then I failed with errors. Then I used SPFlashTool in root mode with official 2018092919_s32v63c2k_jk_pro.rar rom (I don't find it anymore on the net but 1) I got it on Blackview official forum and 2) I have the file on my own PC) with format+Download and replace recovery with TWRP from Jemmini from 4pda.ru before flashing. OK.
Then I rooted again: format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally.
Beware: TWRP is in Russian language at first boot, so to get it in English, first slide the first slide (allowing writing), then select 'Настройки', then the globe on top, then English, then 'Установитъ Язык'.
Hope this helps.
Then, this is my first rooted phone, so I plan to make a custom rom without Gapps (then maybe without Mediatek Ones and agold too) and remake all functionning with apps from Fdroid. Help needed on a manner of removing a system/vendor app properly. Help needed too to add V4A, as I could see max version supported is Nougat. I announce this here as my first post, but my project will be a full post. If someone want help please ask here or MP me
Note: an update of magisk is out (official 18.1), I installed it and my phone tells me a message that facial recognition was not working anymore then it only boots on TWRP... I reflashed it and my phone boots normally again. Wait and see...
Thanks to Jemmini from 4pda.ru again.
Bests Regards
Click to expand...
Click to collapse
It'd be great to have another rom but I'm facing a problem with battery life. Basically mobile network standby drains 5000mah battery every day i turned off from developer option but still problem is there. I have checked every single post on Google but nobody has solution for this. U guys face this problem too?
kanadali said:
It'd be great to have another rom but I'm facing a problem with battery life. Basically mobile network standby drains 5000mah battery every day i turned off from developer option but still problem is there. I have checked every single post on Google but nobody has solution for this. U guys face this problem too?
Click to expand...
Click to collapse
New update has been released today. It solves some battery issues, but be very careful.
I installed it, having TWRP and now I'm stuck in TWRP. I've tried to wipe everything but I'm still in TWRP.
I'll try SPFlashTool ... hope it works.
Everything restored & updated.
Using SPFlashTool I flashed all files included in 2018092919_s32v63c2k_jk_pro.rar (including original recovery instead of TWRP).
After that, Android booted and then, using OTA, I updated to latest version.
Reflected_God said:
New update has been released today. It solves some battery issues, but be very careful.
I installed it, having TWRP and now I'm stuck in TWRP. I've tried to wipe everything but I'm still in TWRP.
I'll try SPFlashTool ... hope it works.
Click to expand...
Click to collapse
Could you please send me the link? Can't find it on blackview forum
kanadali said:
Could you please send me the link? Can't find it on blackview forum
Click to expand...
Click to collapse
The latest version is not on the forum. I installed via OTA.
But if you mean the previous firmware, there is one link on the blackview forum: http://bbs.blackview.hk/viewtopic.php?t=480235#p795494
SP Flash tools are well documented here: https://forum.xda-developers.com/showthread.php?t=1982587
And a complete list of blackview bv9500 / bv9500 pro files and instructions (in russian): https://4pda.ru/forum/index.php?showtopic=931296
Hope you find what you are looking for.
@kanadali,
for the moment I'm not facing battery drain because there is not simcard in it at this state of my modifications, sorry.
@Reflected_God,
I think this is the link I used, I use the 2018092919_s32v63c2k_jk_pro.rar rom for base.
For all others who faces big problems like me (facial recognition not working then reboot on twrp only, I could reflash my phone with SPFlashTool, the rom and twrp from Jemmini/4PDA in russian only (others don't work for me). I used Format + Download in root mode on Linux. Then format /data with TWRP, then install disable_encryption.zip, wipe dalvik, reboot on TWRP, then install Magisk, wipe dalvik, reboot normally. Do other things. To remove gapps I disabled/force stop it before remove with TWRP. Others apps I can't disable simply remove with TWRP. I test if I encounter bugs but none for the moment. If someone wants to know what I do I've made a LibreOffice Calc sheet log, which evolve when I have time
Hope this helps
Bests Regards
Need Files or a GOOD guide. bv9500 NOT PRO.
If someone could upload the exact files that they used, and the exact same steps, that would be great. Please mention what stock version you have and a link to the image if possible as well. I've followed numerous different guides, with multiple different rom versions, multiple different recovery imgs, used sp flash tool and adb/fastboot multiple times, tried making sure everything was unlocked before each try, have all the necessary drivers, and the closest I get to a functional twrp recovery is a green line that appears at the top of the boot screen before it reboots. Ive tried going to the source, the russian site, but all of the links are 404ed. if not for me, then it would be great to just have this all in one place. Thank you please future hero.
Please include exact program versions (ex SP Flash) as well if not zips of them. I am sorry to be asking so much in one post however I truly didn't know what else to do. And I am typically very good with my google fu xD
I currently have build number BV_BV9500_V1.0_20181026. That seems to matter I believe.
I second the notion.
I have the pro model. I have considered rooting it, but honestly, the phone works well enough as-is without root (for me). However, I'd LOVE to be able to play with different ROMs on this device **AS LONG AS I CAN MAINTAIN THE TWO-WAY UHF TRANSCEIVER FUNCTIONALITY** (i.e. not some "needs-a-network-of-some-kind" "walkie talkie app" like Zello but the real UHF two-way), and I'd LOVE the ability to play with the files associated with the radio to really explore the hardware's capabilities.
Unfortunately, this phone seems more popular in [North]eastern Asia than anywhere else so I don't think we're likely to get much on this forum regarding it unless and until BV become a popular name in the western hemisphere.
I recently dug out my old G4 to see if I can repurpose it for anything or just have it as a back up.
It's an H815 European variant with unlocked bootloader. When I last used it I had it running a custom ROM but when I got a new phone I wiped it somehow with TWRP (this is a few years ago so I can't remember).
Now whenever I turn it on, it boots into TWRP. If from TWRP I choose reboot to system, it boots to TWRP.
I tried to install a ROM but it wouldn't, giving the error "this ROM is for P1,G4,H815 (or something like that), your device is .".
So, I edited the ROM metadata and took out the device requirements and it installed fine, as did GAPPs & SuperSU, but still it only boots to TWRP. I've flashed bootloaders, kernels, god knows what else, but it only boots to TWRP. That's it.
I also tried to return it to stock using these: https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848 but it had errors connecting to servers and never installed anything.
I'm aware that I won't be able to recover anything on the device and that's fine! I just want to boot it with ANY ROM, and I'd be grateful for any help! Thanks!
mrmrchoice said:
I recently dug out my old G4 to see if I can repurpose it for anything or just have it as a back up.
It's an H815 European variant with unlocked bootloader. When I last used it I had it running a custom ROM but when I got a new phone I wiped it somehow with TWRP (this is a few years ago so I can't remember).
Now whenever I turn it on, it boots into TWRP. If from TWRP I choose reboot to system, it boots to TWRP.
I tried to install a ROM but it wouldn't, giving the error "this ROM is for P1,G4,H815 (or something like that), your device is .".
So, I edited the ROM metadata and took out the device requirements and it installed fine, as did GAPPs & SuperSU, but still it only boots to TWRP. I've flashed bootloaders, kernels, god knows what else, but it only boots to TWRP. That's it.
I also tried to return it to stock using these: https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848 but it had errors connecting to servers and never installed anything.
I'm aware that I won't be able to recover anything on the device and that's fine! I just want to boot it with ANY ROM, and I'd be grateful for any help! Thanks!
Click to expand...
Click to collapse
Go to thw official TWRP thread and flash the latest preview TWRP version.
Sent from my OnePlus 6T using XDA Labs
Try latest rom and one by one different rom. It's rom related issue. Don't worry, it'll be okay.