ONEPLUS 5 - WILL SUPPORT ALL VERSIONS UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
The Unified Android Toolkit brings together all the Google, Nexus, OnePlus and Samsung Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check md5 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Download/sideload stock OTA image (G,N,O)
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Stock Recovery, CWM touch, Philz_touch or TWRP Touch Recovery
* Custom Device Builder can add build support for listed device and add device support for any Samsung device with an unlocked bootloader [included in ULTIMATE but can be added as an extra]
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser file and custom recovery images to latest versions (PRO ONLY)
* Disable forced encryption on Nexus5X,6,6P and 9
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode (G,N,O)
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google N-Nexus O-OnePlus S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF CUSTOM RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
THE ULTIMATE MODE UNLOCKS THE PRO FEATURES FOR ALL DEVICES WITHOUT HAVING TO BUY THEM SEPARATELY. IT ALSO INCLUDES THE CUSTOM SUPPORT BUILDER TO ADD SUPPORT FOR UNLISTED BUILDS AND CAN EVEN ADD UNLISTED SAMSUNG DEVICE SUPPORT.
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Up' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
** FAQ **
Oooh is this tested?
** reserved **
benc88 said:
Oooh is this tested?
Click to expand...
Click to collapse
I dont have a OnePlus 5 but as long they haven't changed the setup from the 3T everything should work. Bootloader unlock should work fine and basic functions are all the same. There is no custom recovery yet which means no root and there are no firmware images but as soon as they are added I will update it.
mskip said:
I dont have a OnePlus 5 but as long they haven't changed the setup from the 3T everything should work. Bootloader unlock should work fine and basic functions are all the same. There is no custom recovery yet which means no root and there are no firmware images but as soon as they are added I will update it.
Click to expand...
Click to collapse
OK if I get it today I'll let you know!!
mskip said:
I dont have a OnePlus 5 but as long they haven't changed the setup from the 3T everything should work. Bootloader unlock should work fine and basic functions are all the same. There is no custom recovery yet which means no root and there are no firmware images but as soon as they are added I will update it.
Click to expand...
Click to collapse
I have one and the unlock is as simple as enabling it in developer settings and fastboot oem unlock
Great tool!! Will an ultimate license be permanent forever?
Sent from my NEM-L21 using XDA Labs
TwinAdk said:
Great tool!! Will an ultimate license be permanent forever?
Sent from my NEM-L21 using XDA Labs
Click to expand...
Click to collapse
yes .
Looking forward to some rooting on the OP5 hopefully a stable xposed fork will come out for it and some kernel optimization
lethallunatic said:
Looking forward to some rooting on the OP5 hopefully a stable xposed fork will come out for it and some kernel optimization
Click to expand...
Click to collapse
I doubt xposed, isn't magisk the tool of choice currently, for recent Android versions?
Sent from my NEM-L21 using XDA Labs
TwinAdk said:
I doubt xposed, isn't magisk the tool of choice currently, for recent Android versions?
Click to expand...
Click to collapse
Magisk is systemless root and not a framework like xposed. (Correct me if I'm wrong)
I don't have a need for systemless root which magisk offers, mostly interesting for gamers and people who use mobile payment tools etc. There is an xposed for android 7. Just haven't tried it yet.
Edit:
The post I read about xposed being available and the zip files seemed fake. So there is no xposed for android 7.x
lethallunatic said:
Magisk is systemless root and not a framework like xposed. (Correct me if I'm wrong)
I don't have a need for systemless root which magisk offers, mostly interesting for gamers and people who use mobile payment tools etc. There is an xposed for android 7. Just haven't tried it yet.
Click to expand...
Click to collapse
Cool, dropped xposed a while back, and never used magisk. Its systemless ofc
Sent from my NEM-L21 using XDA Labs
TwinAdk said:
Cool, dropped xposed a while back, and never used magisk. Its systemless ofc
Click to expand...
Click to collapse
Xposed offers a few modules which are interesting for me like youtube background playback and adaway for youtube, gravitybox fake wifi. Just to name a few. Would be nice if an alternative comes
lethallunatic said:
There is an xposed for android 7. Just haven't tried it yet.
Click to expand...
Click to collapse
really Xposed for nougat? are you kidding? where? can't find it!
FcukBloat said:
really Xposed for nougat? are you kidding? where? can't find it!
Click to expand...
Click to collapse
It was a forked one. Same like wanam forked it for TW Roms. I'll pm you when I see it again
Edit:
Ignore what I said. It was just a fake post someone posted online. So yes there is NO xposed
i dont care if its called magisk or xposed, i'd take youtube background playback no matter how it is
lethallunatic said:
Xposed offers a few modules which are interesting for me like youtube background playback and adaway for youtube, gravitybox fake wifi. Just to name a few. Would be nice if an alternative comes
Click to expand...
Click to collapse
Mrphtn said:
i dont care if its called magisk or xposed, i'd take youtube background playback no matter how it is
Click to expand...
Click to collapse
YMusic solves both problems (background play, no ads, download audio (including mp3), video and play lists from YouTube, play local songs, etc.
@khangneovip is a freaking GENIUS :victory: Support the project, he has serves to pay for
Thank me later
Sent from my NEM-L21 using XDA Labs
TwinAdk said:
YMusic solves both problems (background play, no ads, download audio (including mp3), video and play lists from YouTube, play local songs, etc.
@khangneovip is a freaking GENIUS :victory: Support the project, he has serves to pay for
Thank me later
Click to expand...
Click to collapse
Thanks for the idea. It does solve one or two but it creates more problems for me. Can't access my channel on YouTube where I can view my subscriptions or playlists unfortunately. This is a music focused app. Any other thoughts are also appreciated
kinda off-topic to the op5 but why have you not included android 8 dev preview builds?
Related
SAMSUNG GALAXY S4 - SUPPORTS ALL VERSIONS UP TO THE LATEST ANDROID BUILDS
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
SUPPORTED MODELS
INTERNATIONAL MODEL GSM [GT-I9500]
INTERNATIONAL MODEL LTE [GT-I9505]
US SPRINT MODEL LTE [SPH-L720]
US CELLULAR MODEL LTE [SCH-R970]
US C SPIRE MODEL LTE [SCH-R970X]
US CRICKET MODEL LTE [SCH-R970C]
US TMOBILE/METROPCS MODEL LTE [SGH-M919]
CANADA MOBIL, VIDEO, WIND LTE [SGH-M919V]
Click to expand...
Click to collapse
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus]
* Root Stock builds
* Various Root options using insecure boot image or custom recovery
* ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
* [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
* Install BusyBox on your device
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Extras, Tips and Tricks section
* Auto Update ToolKit to latest available version at startup (professional only feature)
* Program up to 10 Quickpick slots and run them very quickly (professional only feature)
* Mods section to automatically perform certain tasks on your device
* Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
* Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
* Flash Custom Recovery or Google Stock Image to Device
* Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
* Flash Custom Recovery to Device
* Boot [Nexus] or Flash .img Files directly from your PC
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Disable forced encryption on Nexus6 and Nexus9 devices
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
* Install EFS/Partition Backup/Restore app by Wanam
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
* Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
* Display Important Information about your device
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
**Updates**
**FREQUENTLY ASKED QUESTIONS**
Q. What is ADB Shell?
Adb shell is a linux command line tool (because android is based on linux) used to
send commands to your android device. For S-ON devices, this is crucial for
modifying files in the /system partition (where the rom sits) as you cannot modify
anything in /system when the rom is running without S-OFF like removing system apps.
------------------------------------------------------------------------------------
Q. I flashed Custom Recovery but each time I reboot the Stock Recovery is back
There is an auto recovery restore system on certain Stock Android Builds that will
reflash the Stock Recovery if you flash CWM on a Stock Rom.
Use Root Explorer to Mount the system folder as R/W (or use a free app from Google
Play such as ES File Explorer). Rename the files /system/recovery-from-boot.p and
/system/etc/install-recovery.sh (requires root). Now when you flash Custom Recovery
it will NOT be overwritten after a reboot. You can also do this via the Toolkit.
------------------------------------------------------------------------------------
Q. My AntiVirus program says the Toolkit files may be harmful
The exe compiled files are not digitally signed with a Microsoft certificate (as
they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) may
pick it up as potentially harmful when it is not. They will pick up ANY file that
doesn't contain a purchased Microsoft certificate in the same way. Just Restore the
deleted file and exclude it from further scans and it will be fine. Or switch to a
better AntiVirus program such as BitDefender.
------------------------------------------------------------------------------------
Q. What is the difference between Nandroid and Titanium backup?
A NANDROID will backup the whole system including boot, system, data and recovery
partitions so you can restore a complete rom and all data and settings.
Titanium Backup is mainly used to backup apps and associated user data. These
could be restored AFTER a full wipe and a new Rom had been flashed on your phone.
The other option now which google added into the new adb command list is the adb
backup which is in the ToolKit and can do the same job as Titanium Backup but will
store the data on your PC rather than on the phone (which takes up space).
Q. I cannot find Developer options
With Android 4.2 google have thought it would be funny to hide the Developer options
screen in the Settings. This means you cannot enable usb debugging to communicate
with your device. To show the Developers options screen do the following:
1. Goto Settings, About and tap the Build number text 7 times.
2. When you have tapped 3 times you will be given a countdown of taps until you
become a developer.
3. Once you are told you are now a developer you can go back to the Settings
Screen and can see Developer options.
4. You can now go into Developer options and enable usb debugging.
Q. I am having trouble getting adb working with the drivers installed
Try switching your connection type from media (MTP) mode to camera (P2P) mode.
To do this open the notification area [top left] with the device connected via usb,
click where it says 'connected as' and change from MTP to PTP.
------------------------------------------------------------------------------------
Q. How to get into your Download Mode
1. Unplug your usb cable if you have one plugged in
2. Keep holding the Volume Down, Home and Power buttons until you see a warning
screen [about 10 seconds]
3. Press the Volume Up button to boot the phone into Download Mode
------------------------------------------------------------------------------------
Q. How to get into Recovery
1. Unplug your usb cable if you have one plugged in
2. Keep holding the Volume Up, Home and Power buttons until you see a green android
man on the scree [about 15-20 seconds]
Q. I tried to enter the code for the pro version but it says the code is incorrect
1. Make sure the code entered is for the correct Toolkit being used.
2. You need to start the Toolkit with the toolkit.exe file when activating so the
settings can be initialised or the code will not be accepted.
3. Make sure you enter the code correctly as the characters are case sensitive.
**if needed**
Very well done. Nice work very easy to use.
good to see new stuffz *subscribed*
Yes! I've been waiting for this. Thanks
finally your here sir. been using this wayback my S3. one question sir, is it possible that the Knox flag counter will be reset 0?
Why is this not stickied yet?
Me Gusta!
BladeKnight said:
finally your here sir. been using this wayback my S3. one question sir, is it possible that the Knox flag counter will be reset 0?
Click to expand...
Click to collapse
No
Sent from my D5503 using Tapatalk
having an issue with it. on my i9505, it says only cwm options are enabled, it does not allow backing up for EFS or nandroid. plus if i try rooting it by installing twrp, it flashes it through odin, and always boots back to stock recovery. tried all methods to rename stock recovery files through option 7 but no avail. always boots back to stock recovery. any help would be highly appreciated.
This option has been disabled [from the model/build selection screen]
Hello @mskip
Your toolkit is very helpful, thanks but there's a Problem.
If i try to do a Nandroid-Backup then always the SAME Error-Message shows up:
Code:
[U]This option has been disabled [B][[/B]from the model[I]/[/I]build selection screen[/U][B]][/B]
Click to expand...
Click to collapse
I wasn't able to find a way to bypass this so please help! :crying:
Thanks in advance
---------- Post added at 21:38 ---------- Previous post was at 21:34 ----------
mskip said:
The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports a multitude of Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit
* Backup/Restore a single package or all apps, user data and Internal Storage
*
Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
* Unlock/Re-Lock your Bootloader [Nexus modules]
* Various Root options using insecure boot image or custom recovery
* 1-Click For All to Unlock, Root, Rename the Restore Files and install busybox [Nexus modules]
* ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung modules]
* Fix “Superuser/SuperSU has stopped” message after rooting [Samsung modules]
* Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
* Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
* Dump selected Phone Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
* Install BusyBox on your device
* Install Samsung Knox notification disabler on your device [Samsung modules]
* Install Root checker on your device [to be added to the Nexus modules]
* Extras, Tips and Tricks section with downloadable device user guide
* Auto Update ToolKit to latest available version at startup [PRO ONLY FEATURE]
* Check for latest versions of Superuser [root] and custom Recovery images [PRO ONLY FEATURE]
* Program up to 10 Quickpick slots and run them very quickly [PRO ONLY FEATURE]
* Mods section to automatically perform certain tasks on your phone
* Download Stock Firmware Image for extracting and flashing
* Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus modules]
* Flash Custom Recovery or Stock Firmware Image to device
* Rename the Recovery Restore File present on some Stock Roms
* Boot into CWM Touch, TWRP or Stock Recovery without Flashing it [Nexus modules]
* Boot or Flash .img Files directly from your PC [Nexus modules]
* Install a single apk or multiple apk’s to your device
* Push Files from your PC to your device
* Pull Files from your device to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Set Files Permissions on your device
* Open new Command Prompt for manual input
* Reboot device to various Modes automatically
* Display Important Information about your device
* Display various Help and Information screens and save a screenshot to your pc/send to default printer
* Many many more features
————————————————————–
Supported devices and latest supported builds *HERE*
————————————————————–
--------------------------------------------------------------
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE2: As the exe files are not Digitally Signed with a Microsoft Certificate they ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it. This seems to happen mostly on AVG Free and Norton which is why I switched to BitDefender which is much better.
Credits: ChainsDD for Superuser, Chainfire for SuperSU, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, fOmey for TWRP for the Galaxy Gear
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE YOUR DEVICE. NOTHING IS RESTRICTED.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
2. USING THE UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. The basic Toolkit files are included in the full install package but if you select a device then the working folders will be created and the device files downloaded. Once the files have been extracted the Toolkit will ask if you want to check if an Update is available (for pro users to download/install). If you type ‘no’ then you will be taken to the Model/Build selection screen where you can do a number of things:
Type ’00' to enter your activation code and enable pro features, ‘i’ will take you to the Information and Help Section, ‘a’ will give you information on how to add support for a new build, ’99' will take you to the Basic Toolkit for quick use or if you do not have a supported device and want to perform general android tasks.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest custom recovery and superuser files available (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers.
The Information section which you can get to from the Model Selection screen or from the Main Menu has a wealth of help and frequently asked questions. If you need help then please look there first before asking questions in the thread.
--------------------------------------------------------------
USEFUL INFORMATION
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
--------------------------------------------------------------
ChangeLog
Unified Android ToolKit v1.2.4 [Galaxy S4 V1.0.0] 10th March 2014
+Added support for Samsung Galaxy S3, Samsung Galaxy S3 Mini,*Samsung Galaxy S4 and*Samsung Galaxy Note 2
+Updated support for latest builds in all device modules
+Root options support insecure boot and custom recovery methods [all rewritten]
+Added KNOX notification disabler for Samsung modules
+Added Root Checker to check the status of your root/busybox
+Added more help screens to the Information section and added ability to save screen and send to default printer
+Added philz_touch Advanced cwm recovery to Samsung modules [will be added to Nexus modules soon]
+Added option in build selection screen to disable all adb root functions [custom recovery functions available]
+Toolkit will disable insecure boot functions if insecure boot image not available
+Updated Samsung drivers to 1.5.33.0
+Re-wrote most of the code to Change the way lots of functions work [more efficient and more stable]
+Many more changes I can't think of right now
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Click to expand...
Click to collapse
I am going to press the thanks-button tommorow for this post because i can only give 8 Thanks per day ;-( •·
Supported devices
Hi, in the supported devices list it is samsung s4, but wich models? Its working with i9506?
Thanks
Later Edit: In the program its show the I9506, unfortunately its not working. I always have a "error ocurred" message.
Download link broken for me...
Hannah Stern said:
Hello @mskip
Your toolkit is very helpful, thanks but there's a Problem.
If i try to do a Nandroid-Backup then always the SAME Error-Message shows up:
I wasn't able to find a way to bypass this so please help! :crying:
Thanks in advance
---------- Post added at 21:38 ---------- Previous post was at 21:34 ----------
I am going to press the thanks-button tommorow for this post because i can only give 8 Thanks per day ;-( •·
Click to expand...
Click to collapse
Just do a Nandroid using recovery
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Just do a Nandroid using recovery
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
It's DISABLED...
Hannah Stern said:
It's DISABLED...
Click to expand...
Click to collapse
Nandroid disabledin the recovery ??
mskip said:
Click to expand...
Click to collapse
What does this option?
4. Disable KNOX notifications message [if KNOX is present]
beicuxhaven said:
Nandroid disabledin the recovery ??
Click to expand...
Click to collapse
Exactly.
Could someone please put up a mirror so I can download the toolkit? Thanks
ONEPLUS 1 - SUPPORTS ALL VERSIONS UP TO THE LATEST CM AND OXYGEN OS BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
The Unified Android Toolkit brings together all the Google, Nexus, OnePlus and Samsung Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check md5 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Download/sideload stock OTA image (G,N,O)
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Stock Recovery, CWM touch, Philz_touch or TWRP Touch Recovery
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser file and custom recovery images to latest versions (PRO ONLY)
* Disable forced encryption on Nexus5X,6,6P and 9
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode (G,N,O)
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google N-Nexus O-OnePlus S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: Grarak or TWRP custom recovery on OnePlus 3, ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Up' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
**FAQ**
**VIDEOS**
I have finished all the work on the OnePlus modules for the 1, 2 and 3 devices and it is ready for testing.
You can download and test the Toolkit from the link in post#1. Please remember that this IS a test version at the moment as I do not own any OnePlus devices but I have checked all the code thoroughly and don't see any problems. I am especially pleased with the unlock/lock routines and will probably implement the code for the Nexus modules if it works well.
Everything can be checked (and please do) except downloading a stock build directly from the Toolkit as I am waiting to hear back from AndroidFileHost to see if I can get direct links to use in the Toolkit. The fastboot flash routines are working though and the Toolkit will detect the storage of the device (16GB or 64GB) and flash the relevant userdata image so you do not have to do that manually anymore.
I have used the Universal USB driver pack from CWM so if anyone has not installed OnePlus drivers yet PLEASE test if this works. I did originally include the official drivers from OnePlus but they close the Toolkit when the drivers installation starts and thats not great.
The ALLINONE routine should work fine and I have sent out some pro codes to testers to check it all works.
All builds are covered and the correct version of TWRP will be downloaded depending on the build selected. Please check everything and let me know of any bugs or textual errors (as I used a lot of the Nexus code) so I can release it publicly as soon as possible.
Thanks, Mark.
Updated OnePlus 1 Device Module for Public (free) and Pro Users
Changelog:
+Added flash custom recovery before booting to it as per rooting guides
+Changed a lot of text to make it more relevant to the OnePlus devices
+Added text about disabling CM recovery protection in developer options to stop CM builds restoring the stock recovery
+added a bit more error control
+Fixed Toolkit going back to device selection when going to driver help screen
I’m still not sure if the Universal USB driver pack from CWM installs the recovery adb drivers. A couple of users have said when booting to recovery the device isnt being detected by the Toolkit. If someone has knowledge of adb drivers and knows their way around the device manager please look at the different modes and check drivers are installed.
Pro users can get the latest version by just selecting their device at startup and accepting the update.
Non Pro users have a few more steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the installation folder (or the Start Menu)
3. Select your device (OnePlus 1, 2, 3 or X) from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast.
Enjoy, Mark.
Updated OnePlus 1 Device Module for Public (free) and Pro Users to v1.0.3
Changelog:
+Added option to reboot to custom recovery after it has been flashed
+Disabled openrecovery options in custom recovery until driver issue is fixed
+Made some changes to text in Toolkit to make some things easier to understand
+OnePlus device modules are now stable
Pro users can get the latest version by just selecting their device at startup and accepting the update.
Non Pro users have a few more steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the installation folder (or the Start Menu)
3. Select your device (OnePlus 1, 2, 3 or X) from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. If you have not updated to v1.5.0 you must ALSO select option 62 to update the Toolkit.exe file
6. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast.
Enjoy, Mark.
AutoUpdate Available for OnePlus1 device modules [Pro Users]
Changelog:
+Test fix for booting to recovery after flashing recovery image
+Few bug fixes
+Waiting for TWRP recovery driver fix to enable ALLINONE/OPENRECOVERY scripts
Once I get the twrp drivers working properly with the Toolkit I will update the modules and upload new device modules for everyone to use.
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast. Also follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy, Mark
@mskip
Does this tool work for the oneplus one with cos 13.1.1-ZNH2KAS2X1
i want to unlock a oneplus one of a mate ... can pls anyone help me i dont want to brick it :/
JonasMeyer said:
@mskip
Does this tool work for the oneplus one with cos 13.1.1-ZNH2KAS2X1
i want to unlock a oneplus one of a mate ... can pls anyone help me i dont want to brick it :/
Click to expand...
Click to collapse
Go to this link, http://forum.xda-developers.com/showthread.php?t=2843675
you will find what you need
Sent from my A0001 using XDA-Developers mobile app
JonasMeyer said:
@mskip
Does this tool work for the oneplus one with cos 13.1.1-ZNH2KAS2X1
i want to unlock a oneplus one of a mate ... can pls anyone help me i dont want to brick it :/
Click to expand...
Click to collapse
There's an option to automate any zip version but it's a pro version. Just to shill a bit, Skip's been around since 2012 and he's only done good work. If you want to save time and a lot of patience, it's a good software to pay for as he continuously supports new version of all our tools (SuperSU, TWRP, CWM, etc.). Putting that aside, as long as you put the .zip in the folder anyways, you'll be prompted to confirm it.
@alpha-niner64 so this tool supports my android version.. cause on the website it says cm 13.1 and im on cm13.1.1 and the version i mentioned in the last post... in other words .. can i use this tool to root it.. cause bacon root kit doesnt work for the new version
AutoUpdate Available for OnePlus X device module 1.0.7 [Pro Users]
Changelog:
+Added full support for CM 13.1.1 and CM 13.1.2 builds
+Added fastboot image links to option 9,1 to download via skipsoft and flash
+Updated stock image flash routine to better support flashing from bootloader mode
+Updates/improvements to root method updating
+Updated drivers section to give more help and more options
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy, Mark.
@mskip hi i just want to know if your toolkit can root nvdia shield tablet k1?
Bitcloud30 said:
@mskip hi i just want to know if your toolkit can root nvdia shield tablet k1?
Click to expand...
Click to collapse
In the OP you find the link to supported devices
Sorry I forgot to update the version number in the update checker so it didn't show the new update. This is fixed now and should detect an update when you select the device.
Mark.
mskip said:
Sorry I forgot to update the version number in the update checker so it didn't show the new update. This is fixed now and should detect an update when you select the device.
Mark.
Click to expand...
Click to collapse
Hi, I sent you several email, even a Paypal communication, regarding a donation for OnePlus One. I still have not received the code for the activation of the last version of the module. I really appreciate the work you've done with the toolkit, it helped me unlocking and modding my OPO, but now please tell me something, or I will cancel the payment on Paypal.
AutoUpdates Available for OnePlus 1 device module 1.2.1 [Pro Users]
Changelog:
v1.2.1 – 17th May 2017
+Added instructions in OTA section [10] how to update device via OTA sideload
+Added option in OTA section to go to OnePlus download page to download ota image
+Few minor fixes to OnePlus main code
v1.2.0 – 15th May 2017
+Updated Toolkit base to 1.6.1. Updated app versions and improved functions
New base version adds support for OnePlus 3T device
+Toolkit will disable all server pings if they cause any trouble with downloads
+Added direct link to OnePlus download site in factory image/ota downloads section
+Improved some Main Menu functions
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy, Mark.
AutoUpdate Available for OnePlus One device module [Ultimate/PRO Users Only]
Changelog:
+Updated Toolkit base to 1.6.2 for NEW Ultimate feature. After device selection the Toolkit will update the devices main module to the latest version even if an AutoUpdate is not ready yet. This is extremely useful if an AutoUpdate hasn’t been released in a while or if an AutoUpdate isn’t needed but the main module needs updating for up to minute bug fixes/new features. Minimum base version 1.6.2 needed for this to work
+Updated TWRP custom recovery to latest official version 3.1.1.0 for use with later builds
+Added VerifiedBootSigner flash to Twrp Recovery install procedure
+Updated VerifiedBootSigner zip file from Chainfire to latest V7.0
+Integrated flashing verifiedbootsigner in to root procedures if needed
+Updated some root functions and removed SuperUser by CWM from root relection
+Updated app/file versions to latest
+Fixed some bugs in the main code
If you find any of this useful PLEASE donate to a device project. You can do it through the Toolkit (after selecting the device at startup) or from the link *HERE* so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy.
ll
ONEPLUS 3T- SUPPORTS ALL VERSIONS UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
The Unified Android Toolkit brings together all the Google, Nexus, OnePlus and Samsung Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check md5 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Download/sideload stock OTA image (G,N,O)
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Stock Recovery, CWM touch, Philz_touch or TWRP Touch Recovery
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser file and custom recovery images to latest versions (PRO ONLY)
* Disable forced encryption on Nexus5X,6,6P and 9
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode (G,N,O)
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google N-Nexus O-OnePlus S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: Grarak or TWRP custom recovery on OnePlus 3, ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Up' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
*FAQ*
*VIDEOS*
Great very useful.
Wow, great job! Thanks for this :good:
Great news, I used your Toolkit for my Nexus 4 / Nexus 5...
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Great news ? i need this
Updated OnePlus 3T Device Module for Public (free) and Pro Users [v1.0.3]
Changelog:
v1.0.3 – 17th May 2017
+Added full support for OnePlus Open BETA 7 build
+Added instructions in OTA section [10] how to update device via OTA sideload
+Added option in OTA section to go to OnePlus download page to download ota image
+Few minor fixes to OnePlus main code
Pro users can get the latest version by just selecting their device at startup and accepting the update.
Non Pro users have a few more steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the installation folder (or the Start Menu)
3. Select your device (OnePlus 3T) from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy, Mark.
Awesome, thank you!
Oh wow, this is definitely a good tool. Nice and complete. Thank you much, OP.
Looks really helpful for newbies, anyone tried this?
Updated OnePlus 3T Device Module for Public (free) and Pro Users [v1.0.4]
Changelog:
v1.0.4 – 17th May 2017
+Added option 10,1 from Main Menu to Download/Check/Sideload OnePlus ota image directly through Toolkit (very useful feature)
+Added option 10,4 to sideload previously backed up ota image zip to device
Pro users can get the latest version by just selecting their device at startup and accepting the update.
Non Pro users have a few more steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the installation folder (or the Start Menu)
3. Select your device (OnePlus 3T) from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to a device project please do it through the Toolkit (after selecting the device at startup) or from the link at http://www.skipsoft.net/?page_id=703 so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy, Mark.
This is a wonderful idea/project... Very useful, helpful and easy... Especially for people such as myself who own multiple devices and truly escalates my laziness tenfold...
just one suggestion...
Please add a feature that would automatically install xposed to sdks 24 and up before @rovo89 develops them... I'm sure he wouldn't mind taking that weight off his shoulders...
joking :laugh:
Nonetheless Awesome project!
well i am doing something stupid i hope.
donated and installed first time booted up entered option 55 entered my code
then it keeps coming up with not enough storage and just goes back to main screen (also this is the first thing the CMD window types).
i did manage to get it to the oneplus3T screen antered my level of OS then it just went back to main screen ? yes have rebooted both phone and pc
i am running windows 10 hdd has 200Gb storage phone has about 21.3Gb free any help /ideas
also when i try to restart toolkit it is the free version not pro is that normal?
chenzen666 said:
well i am doing something stupid i hope.
donated and installed first time booted up entered option 55 entered my code
then it keeps coming up with not enough storage and just goes back to main screen (also this is the first thing the CMD window types).
i did manage to get it to the oneplus3T screen antered my level of OS then it just went back to main screen ? yes have rebooted both phone and pc
i am running windows 10 hdd has 200Gb storage phone has about 21.3Gb free any help /ideas
also when i try to restart toolkit it is the free version not pro is that normal?
Click to expand...
Click to collapse
If its a Toolkit installation problem could you please pm me or email [email protected] to sort it out. Never had that error before, maybe deleting that installation and reinstalling to the root of the hard drive.
AutoUpdate Available for OnePlus 3T device module [Ultimate/PRO Users Only]
Changelog:
+Updated Toolkit base to 1.6.2 for NEW Ultimate feature. After device selection the Toolkit will update the devices main module to the latest version even if an AutoUpdate is not ready yet. This is extremely useful if an AutoUpdate hasn’t been released in a while or if an AutoUpdate isn’t needed but the main module needs updating for up to minute bug fixes/new features. Minimum base version 1.6.2 needed for this to work
+Updated TWRP custom recovery to latest official version 3.1.1.0 for use with later builds
+Added VerifiedBootSigner flash to Twrp Recovery install procedure
+Updated VerifiedBootSigner zip file from Chainfire to latest V7.0
+Integrated flashing verifiedbootsigner in to root procedures if needed
+Updated some root functions and removed SuperUser by CWM from root relection
+Updated app/file versions to latest
+Fixed some bugs in the main code
If you find any of this useful PLEASE donate to a device project. You can do it through the Toolkit (after selecting the device at startup) or from the link *HERE* so you get the right code fast and can update to the latest version. You can also go ULTIMATE mode now and unlock ALL device modules for the lifetime of the Toolkit. Follow me on twitter at https://twitter.com/mskipxda for posts/updates.
Enjoy.
I am from india and my oos version is 4.1.4 but in toolkit last version is 4.1.3 can I continue with it?
Sent from my ONEPLUS A3003 using XDA-Developers Legacy app
email sent
working on windows 10 LTSB 2015 with no errors But still problems on windows 10 insider preview.
chen
Can I use it with 4.1.6?
GOOGLE PIXEL 2- SUPPORTS ALL MODELS WITH UNLOCKABLE BOOTLOADER UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
NOTE: Verizon models (not sure about ee) have locked the bootloader. In this case you will not be able to toggle the oem unlock setting to unlock the bootloader via the developer screen.
NOTE2: At the moment TWRP is still in alpha testing and lots of things do not work on it such as device decryption, mtp and backup. It's very risky to add this to the toolkit in this state as someone could easily brick their device if they dont know what they are doing so until a more stable version is made custom recovery will not be added.
The Unified Android Toolkit brings together Nexus, Google, Samsung and OnePlus Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader or check status (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check sha256 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Custom Device Builder can add build support for listed device and add device support for any Samsung device with an unlocked bootloader [included in ULTIMATE, can be added as an extra]
* Download/sideload stock OTA image (G,N,O)
* Install Magisk Root on device [and uninstall if needed]
* Disable dm-verity check
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Recovery [Stock, CWM, Philz_touch or Twrp Touch]
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser files to latest versions
* Auto Update Custom Recovery to latest versions [PRO ONLY]
* Disable forced encryption on device if needed
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google Pixel, N-Nexus, O-OnePlus, S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some may get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC, PROFESSIONAL AND ULTIMATE VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR AUTO UPDATES DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF CUSTOM RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE QUICK PICKS SECTION ALLOWS YOU TO PROGRAM UP TO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE ANY BUILD OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
THE ULTIMATE MODE ALLOWS YOU TO ACTIVATE THE PRO MODE ON EVERY DEVICE MODULE THE TOOLKIT SUPPORTS. NO MORE NEED TO BUY A NEW PRO CODE EVERY TIME YOU BUY A NEW DEVICE. THE ULTIMATE MODE ALSO INCLUDES THE NEW CUSTOM BUILDER MODE WHICH LETS YOU ADD SUPPORT FOR NEW BUILDS EVEN BEFORE THE TOOLKIT CAN ADD IT. CUSTOM BUILDER MODE CAN ALSO ADD SUPPORT FOR SAMSUNG DEVICES THAT HAVEN'T YET BEEN ADDED TO THE TOOLKIT.
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW. WITHOUT YOUR SUPPORT THE TOOLKIT CANNOT EXIST.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
Newer devices also require you to enable OEM Unlocking in the developer section to allow the bootloader to be unlocked. Tap Developer options and enable OEM unlocking and USB debugging. (If OEM unlocking is disabled, connect to the Internet so the device can check in at least once. If it remains disabled, your device may be SIM locked by your carrier and the bootloader cannot be unlocked.)
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features if you have one, 'dr' will allow you to install drivers, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Down' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
Show the Menu in the Stock Recovery Screen
1. Hold the Power button and keep holding as you press the Volume Up button quickly. The blue recovery menu screen should pop up.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
** FAQ **
** reserved if needed **
I have not added Magisk root for the Pixel 2 yet but if anyone wants it I can add it.
UPDATE FOR GOOGLE PIXEL 2 DEVICE FOR ALL USERS (PRO AND PUBLIC)
Changelog [Google Pixel 2] v1.0.2:
+Added FULL Support for Android 8.0.0 OPD1.170816.025, Nov 2017, EMR
+Added FULL Support for Android 8.0.0 OPD3.170816.023, Nov 2017, Verizon EMR
+Added above STOCK and OTA images to download/flash directly from Toolkit using option 9,1 [firmware download/flash] or 10,1 [ota download/sideload]
Pro users can just start the Toolkit as normal. After you have selected your device you will be notified there is an update available and can auto update. SIMPLE.
Non Pro users have a few extra steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the intallation folder (or the Start Menu)
3. Select the device from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Select option 63 to update to the latest md5 firmware check file (if you are downloading new firmware)
6. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to the device module project or purchase an Ultimate Code to unlock all devices/features please do it through the Toolkit so you get the right code fast.
I've used ADB for most of my rootable devices but also bought your Toolkit to support it's development and it certainly makes things easier for everyone to not make a mistake or skip a step.
Thanks for putting this together for the Pixel 2.
if my bootloader is already unlocked, can i use this tool to instal twrp and root WITHOUT wiping my device?
mjondj said:
if my bootloader is already unlocked, can i use this tool to instal twrp and root WITHOUT wiping my device?
Click to expand...
Click to collapse
Yes. Your device will be wiped after unlocking the bootloader. TWRP and root shouldn't cause another wipe.
mjondj said:
if my bootloader is already unlocked, can i use this tool to instal twrp and root WITHOUT wiping my device?
Click to expand...
Click to collapse
Let me know how rooting goes with the alpha version of TWRP. if it works fine I will look in to adding it (with lots of warnings).
UPDATE FOR GOOGLE PIXEL 2 DEVICE FOR ALL USERS (PRO AND PUBLIC)
This is to update your Toolkit.exe file so that adb/fastboot files can be automatically updated to the latest version. This should fix any problems with flashing November firmware images due to outdated files. This update will also fix pro users restarting to the wrong device module after taking an AutoUpdate (affective from the next update).
Pro users can just start the Toolkit as normal. After you have selected your device you will be notified there is an update available [v1.0.3] and can auto update. SIMPLE.
Non Pro users have a few extra steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the intallation folder (or the Start Menu)
3. Select the device from the list (option 09)
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Select option 62 from the list to update Toolkit.exe to the latest version
6. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
7. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to the device module project or purchase an Ultimate Code to unlock all devices/features please do it through the Toolkit so you get the right code fast.
Ur drivers for Windows are a god send I could not get my ADB to upgrade and flashall.bat was failing so I ran ur driver install with system wide ADB bam worked like a charm thx man
Will I get the regular google updates if my phone is unlocked and rooted?
mskip said:
I have not added Magisk root for the Pixel 2 yet but if anyone wants it I can add it.
Click to expand...
Click to collapse
Yes please add Magisk root.
mskip said:
I have not added Magisk root for the Pixel 2 yet but if anyone wants it I can add it.
Click to expand...
Click to collapse
Yes, I would like to try the Magisk root, and I like being able to do everything with your toolkit.
This doesn't seem to root for me using EMR options on my Pixel 2 (non Verizon). SuperSU is installed, but root checker fails. Did the cleanup as well, but no dice unfortunately.
Hey! On this page Google Pixel 2 is unsupported. Where i can download build with support this device?
I'm skeptical about the accuracy of this. Has anyone successfully rooted their Pixel 2 with this tool?
Won't Root my Project Fi 2XL
Xechorizo said:
This doesn't seem to root for me using EMR options on my Pixel 2 (non Verizon). SuperSU is installed, but root checker fails. Did the cleanup as well, but no dice unfortunately.
Click to expand...
Click to collapse
Nah, it doesn't root my Project Fi 2XL either. It took a couple of tries before it even pushed SuperSU, but even then Root Checker fails.
Galaxy S8 Support?
Trying to flash stock firmware on Pixel 2. Takes about a half hour to download and everything. I end up just getting your device has not been set.
GOOGLE PIXEL 2 XL- SUPPORTS ALL MODELS WITH UNLOCKABLE BOOTLOADER UP TO THE LATEST ANDROID BUILDS.
SEE SUPPORT LIST FOR PUBLIC/PRO VERSIONS *HERE*
NOTE: Verizon models (not sure about ee) have locked the bootloader. In this case you will not be able to toggle the oem unlock setting to unlock the bootloader via the developer screen.
NOTE2: At the moment TWRP is still in alpha testing and lots of things do not work on it such as device decryption, mtp and backup. It's very risky to add this to the toolkit in this state as someone could easily brick their device if they dont know what they are doing so until a more stable version is made custom recovery will not be added.
The Unified Android Toolkit brings together Nexus, Google, Samsung and OnePlus Toolkits and supports many devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.
FUNCTIONS OF UNIFIED ANDROID TOOLKIT
* Install correct adb/fastboot drivers automatically
* Backup/Restore a single package or all apps, user data and Internal Storage
* Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
* Root any public build automatically
* SkipRoot boot image to AutoRoot (selected builds)
* Sideload root/unroot files via Custom Recovery
* ALLINONE to Unlock, Flash Recovery, Root, Rename the restore file + install Busybox (G,N,O)
* ALLINONE to Flash Recovery, Root, Rename the recovery restore files + install Busybox (Samsung)
* Unlock/Re-Lock your Bootloader or check status (G,N,O)
* Download Google Stock Image files directly to the ToolKit (G,N,O)
* Check sha256 of google stock image before flashing
* Flash Google Stock Image (G,N,O)
* Flash any part of a stock firmware image to device [boot, system, recovery, etc.] (G,N,O)
* Custom Device Builder can add build support for listed device and add device support for any Samsung device with an unlocked bootloader [included in ULTIMATE, can be added as an extra]
* Download/sideload stock OTA image (G,N,O)
* Install Magisk Root on device [and uninstall if needed]
* Disable dm-verity check
* Install BusyBox binarys on device
* Rename the Recovery Restore File present on Stock Roms (if stock recovery is being restored after flashing custom recovery image)
* Flash Recovery [Stock, CWM, Philz_touch or Twrp Touch]
* Pull /data and /system folders, compress to a .tar file and save to your PC
* Auto Update Toolkit at startup (PRO ONLY)
* Auto Update superuser files to latest versions
* Auto Update Custom Recovery to latest versions [PRO ONLY]
* Disable forced encryption on device if needed
* Install Root Checker app by Burrows Apps
* Install Backup/Restore app by MDroid Apps
* Install EFS/Partition Backup/Restore app by Wanam
* Create tar with 1-Click for flashing via Odin
* Fix extSdCard write permissions in Android 4.4+
* Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC (selected builds)
* Useful Mods, Fixes and Tools Section
* Extras, Tips and Tricks section (includes guides)
* Backup/Restore your /efs partition (gsm only)
* Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC ( on builds with insecure image available)
* Mods section to automatically perform certain tasks on your device
* Boot to any recovery without Flashing it (G,N,O)
* Boot or Flash .img Files directly from your PC
* Quick Picks Professional Feature (10 slots)
* Install a single apk or multiple apk's to your device
* Push Files from your PC to your phone
* Pull Files from your phone to your PC
* Set Files Permissions on your device
* Pull and Trim your Radio Image (gsm models only) to your PC
* Dump selected LogCat buffers to your PC
* Dump BugReport to your PC
* Rip cache.img to zip file in CWM format
* Reboot device to Fastboot Mode or Android in fastboot mode
* Reboot device to Fastboot Mode, Recovery, Android or Download Mode in adb mode
* Turn Initial Start Screen On/Off for next use
* Sideload any zip file via Custom Recovery
* Basic Toolkit for use with ANY Android device
Key: G-Google Pixel, N-Nexus, O-OnePlus, S-Samsung
--------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------------------------------------------------------
SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*
DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)
NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some may get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.
Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.
--------------------------------------------------------------
WHAT IS THE DIFFERENCE BETWEEN PUBLIC, PROFESSIONAL AND ULTIMATE VERSIONS?
THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.
ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR AUTO UPDATES DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF CUSTOM RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
THE QUICK PICKS SECTION ALLOWS YOU TO PROGRAM UP TO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
PRO USERS CAN ALSO SELECT THE ANY BUILD OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).
THE ULTIMATE MODE ALLOWS YOU TO ACTIVATE THE PRO MODE ON EVERY DEVICE MODULE THE TOOLKIT SUPPORTS. NO MORE NEED TO BUY A NEW PRO CODE EVERY TIME YOU BUY A NEW DEVICE. THE ULTIMATE MODE ALSO INCLUDES THE NEW CUSTOM BUILDER MODE WHICH LETS YOU ADD SUPPORT FOR NEW BUILDS EVEN BEFORE THE TOOLKIT CAN ADD IT. CUSTOM BUILDER MODE CAN ALSO ADD SUPPORT FOR SAMSUNG DEVICES THAT HAVEN'T YET BEEN ADDED TO THE TOOLKIT.
MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW. WITHOUT YOUR SUPPORT THE TOOLKIT CANNOT EXIST.
AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv
--------------------------------------------------------------
PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.
--------------------------------------------------------------
1. INSTALLING ADB/FASTBOOT DRIVERS
The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.
THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.
If drivers are not installed or there is an exclamation mark next to the device:
Plug the device in to a usb cable directly connected to your motherboard.
In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
Click OK and select Google ADB Interface.
Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.
On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.
Newer devices also require you to enable OEM Unlocking in the developer section to allow the bootloader to be unlocked. Tap Developer options and enable OEM unlocking and USB debugging. (If OEM unlocking is disabled, connect to the Internet so the device can check in at least once. If it remains disabled, your device may be SIM locked by your carrier and the bootloader cannot be unlocked.)
--------------------------------------------------------------
2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT
When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features if you have one, 'dr' will allow you to install drivers, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.
Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).
--------------------------------------------------------------
USEFUL INFORMATION
How to get into your FastBoot Mode
1. Turn your phone off
2. Unplug your usb cable if you have one plugged in
3. Keep holding the 'Volume Down' and 'Power' buttons to boot the phone into FastBoot Mode
How to get into Recovery
1. First boot into FastBoot Mode as described above
2. Scroll down with the 'Volume Down' button until it says 'Recovery mode' at the top and press the 'Power' button to enter Recovery
Show the Menu in the Stock Recovery Screen
1. Hold the Power button and keep holding as you press the Volume Up button quickly. The blue recovery menu screen should pop up.
--------------------------------------------------------------
*DISCLAIMER*
I take no responsibility for any fault or damage caused by using the Unified Android Toolkit. No warranties of any kind are given.
** FAQ **
** reserved if needed **
@mskip
Looks like quite a lot that can help out new users that have never used a Nexus/pixel device. Am I right in assuming that all "Nexus" functions will work for pixel devices aside from what is still a wip on this device? Such as easier downloading of the newest stock image, or just what is stated will work with the xl 2, which from what I can see is just disabling force encryption?
Either way, looks like a ton of work has gone into this. Nice job
Lawlrus said:
@mskip
Looks like quite a lot that can help out new users that have never used a Nexus/pixel device. Am I right in assuming that all "Nexus" functions will work for pixel devices aside from what is still a wip on this device? Such as easier downloading of the newest stock image, or just what is stated will work with the xl 2, which from what I can see is just disabling force encryption?
Either way, looks like a ton of work has gone into this. Nice job
Click to expand...
Click to collapse
Everything that is listed to work on Nexus devices will also works on Pixel devices including unlocking bootloader and downloading/flashing stock images. I have just added support for the new google images added this morning although im a bit confused why google release images for verizon devices when the bootloader cannot be unlocked and the images cannot be flashed.
I have also just added the critical partitions unlock procedure for the Pixel 2 XL. Latest version is 1.0.2 but I will post a message in a few minutes on how to update using AutoUpdate or ToolKitClean.
@mskip
Sounds good, thanks for the explanation
Thanks. Went ultimate. I'll try rooting next. Keep up the good work!
wtherrell said:
Thanks. Went ultimate. I'll try rooting next. Keep up the good work!
Click to expand...
Click to collapse
Please let me know what works and what doesn't so things can be fixed if needed.
UPDATE FOR GOOGLE PIXEL 2 XL DEVICE FOR ALL USERS (PRO AND PUBLIC)
Changelog [Google Pixel 2 XL] v1.0.2:
+Added FULL Support for Android 8.0.0 OPD1.170816.025, Nov 2017, EMR
+Added FULL Support for Android 8.0.0 OPD3.170816.023, Nov 2017, Verizon EMR
+Added above STOCK and OTA images to download/flash directly from Toolkit using option 9,1 [firmware download/flash] or 10,1 [ota download/sideload]
+Added new critical-partitions unlock command to bootloader unlock procedure for full unlock
Pro users can just start the Toolkit as normal. After you have selected your device you will be notified there is an update available and can auto update. SIMPLE.
Non Pro users have a few extra steps.
1. Exit the Toolkit if it is open.
2. Run ToolkitClean.exe from the intallation folder (or the Start Menu)
3. Select the device from the list
4. Type ‘y’ or ‘yes’ (without the quotes) to delete the existing module files and settings for the device
5. Select option 63 to update to the latest md5 firmware check file (if you are downloading new firmware)
6. Restart the Toolkit, select the device and new module files will be downloaded/installed
If you want to donate to the device module project or purchase an Ultimate Code to unlock all devices/features please do it through the Toolkit so you get the right code fast.
I was waiting for this. Probably want to redo all of my partitions, both A and B, at some point.
I am unable to boot to anything but the bootloader. Every attempt to use this to re-flash stock 8.0, it fails. It shows that my device is not set and returns to the main menu. Am I missing something??
chadhoard said:
I am unable to boot to anything but the bootloader. Every attempt to use this to re-flash stock 8.0, it fails. It shows that my device is not set and returns to the main menu. Am I missing something??
Click to expand...
Click to collapse
Had similar issues until I updated Android Tools.
They've just been updated for Pixel 2's. The older versions and 'Minimal' ADB packs do not work on Pixel 2's.
michaelbsheldon said:
Had similar issues until I updated Android Tools.
They've just been updated for Pixel 2's. The older versions and 'Minimal' ADB packs do not work on Pixel 2's.
Click to expand...
Click to collapse
Where and how do I install the most current? Also, I have the Pixel 2 XL, if that matters.
chadhoard said:
Where and how do I install the most current? Also, I have the Pixel 2 XL, if that matters.
Click to expand...
Click to collapse
This'll do it:
https://developer.android.com/studio/index.html
michaelbsheldon said:
This'll do it:
https://developer.android.com/studio...orm-tools.htm
Click to expand...
Click to collapse
Comes up with page not found.
chadhoard said:
Comes up with page not found.
Click to expand...
Click to collapse
Try new link for it: https://developer.android.com/studio/index.html
michaelbsheldon said:
Try new link for it: https://developer.android.com/studio/index.html
Click to expand...
Click to collapse
So just install this and then run SkipSoft ToolKit?
thanks for the great tools. I got the Ultimate version
chadhoard said:
I am unable to boot to anything but the bootloader. Every attempt to use this to re-flash stock 8.0, it fails. It shows that my device is not set and returns to the main menu. Am I missing something??
Click to expand...
Click to collapse
I had the same problem. I am updating the android studio as recommended (thank you @michaelbsheldon) as we speak and I'll try and report back.
So I just download the android studio from the site and don't run it correct? All should be good once it is installed?
Amazing continued work by @mskip by the way! Awesome tool! I have been using it for 4 phones now.
JDROIDS said:
I had the same problem. I am updating the android studio as recommended (thank you @michaelbsheldon) as we speak and I'll try and report back.
So I just download the android studio from the site and don't run it correct? All should be good once it is installed?
Amazing continued work by @mskip by the way! Awesome tool! I have been using it for 4 phones now.
Click to expand...
Click to collapse
I had a couple of issues while installing. However, I was able to get it to install. After rebooting my PC, I still can not get it to flash stock.