All credits for this go to @tora33, c/p from here, he tested it himself, and confirmed it working.
This should bring back your bricked phone from the dead, it's a low level flash procedure, meaning don't play around with it unless absolutely necessary, IT WILL WIPE YOUR PHONE CLEAN!
Charge your mobile phone
download :
New link for qfil file Qfil_zl1_ufs
and put in C:/
download : FlashOne2.0 , put in a folder and extract it ,
run "FlashOne2.0"
How to qfil Flash
When select qfil flash type, press power key, volume up and volume down key at the same time, then the phone enter into qfil mode, connect USB cable with PC, wait for PC install driver automatically, then press ‘Refresh’ button on the tool, serial port will display on UI, select the port you want to flash, and make sure there is no other qcom device connected.
Select corresponding flash zip file, the path of zip file should not contain Chinese and special character. (Under qfil mode, the tool can’t get hardware information, you should check if the software and hardware is matching yourself.)
Press ‘Flash’ button, then start to unzip flash zip file to current folder, but if there is already a corresponding unzip file existing, ‘Decompression folder is exist, re-decompress or not?’ dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatically, and the progress bar display flashing progress, and at the same time, the flashing log will also be shown on UI.
After flash complete or error happened, a notification dialog will pop up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can this restore bands? I have tried everything and i cant get b20 active.
the links are death , look here
tora33 said:
the links are death , look here
Click to expand...
Click to collapse
fixed
This is very neat. Kind of like an odin-restore program for Le Pro3! Is there any way to get the stock LEX727 file for this?
the link of: le_zl1_qfil_ufs
Continue offline for me
kmkzneguin said:
the link of: le_zl1_qfil_ufs
Continue offline for me
Click to expand...
Click to collapse
New link posted
18:36:37: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
18:36:37: ERROR: function: sahara_main:854 Sahara protocol error
18:36:37: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
If you did the process correctly, it could be a hardware problem (I hope not)
kmkzneguin said:
18:36:37: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
18:36:37: ERROR: function: sahara_main:854 Sahara protocol error
18:36:37: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Click to expand...
Click to collapse
Hi,
I had the same error trying to revive my x727 while I was using a Qfil file provided by Tora33 on the w w w.leeco.re/topic/1906-helpx720-bricked
2017-06-11 02:18:18 QfilFlashThread >>> 02:18:17: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
2017-06-11 02:18:18 QfilFlashThread >>> 02:18:17: ERROR: function: sahara_main:854 Sahara protocol error
However, i finally succeeded with the qfil file from another link that was provided on page 2 of the leeco.re forum.
Just follow the same guidelines with the "newer" Qfil file.
One downside for me is that my x727 now thinks it is a dual sim x720
@tora33 --> Many many thanks for providing a working solution to revive our devices.
Thanks for this!
Sent from my LEX727 using Tapatalk
Can confirm that this works. It took a lot of tries to work but it did. The things that I had to try before this actually worked include: hold the button combo to get into qfil mode for like 2 minutes, use the original charging cable, use a usb 2.0 port connected to the motherboard (e.g. use the back usb ports if you're using a desktop), holding the power button for a really long time, and charging for like 2-3 hours to make sure that the phone had enough battery. It is a finicky process, but it does work. The phone, if you were on a US rom, now reads as a 720 Chinese edition. That being said, I'm just glad the phone is back up and running lol.
I think, we can flash this rom by this tool. But, name of rom needs to be very short, example 1.zip.
Incidentally.. After the phone comes back to life... Your Le Pro 3 will be running a Developer Version of EUI. However, you can install the latest version of Official EUI version. Unfortunately, the method isn't simple and requires a bit more steps.
After the flashing is successful, your Le Pro 3 may not boot automatically. Press the Power Button for a LOOOONG time... about a a minute or so... for it to leave the QFIL Mode. After a long vibration, the phone will start and will take its sweet time to boot up. Have patience.
Incidentally... after flashing and first boot... you may notice that the Internal Storage is abnormally low... about 10GB Only. A simple solution to restore the internal storage to 32GB / 64GB is by going to Backup/Restore in Settings and Factory Resetting the Phone with the "Format Virtual SD Card" Option selected.
To install the latest Official EUI download the ROM from preferably official sources... Rename the file to Update (The file should read Update.zip... not Update.zip.zip) and Paste in the phone. Using the Inbuilt File Manager.... tap on the Update.zip file and choose upgrade. If this method works... Great...
If not... You will need to Flash TWRP Recovery, Wipe EVERYTHING... and flash the ROM using a Flash Drive and after mounting USB OTG Storage.
To Flash TWRP simply shut down the phone and By Keeping the Volume Down Button Pressed Hit the Power Button to Enter the Fastboot Mode.
Thereafter... flash TWRP Recovery... Boot into TWRP Recovery... Restart TWRP Recovery... Insert the USB Flash Drive Using USB OTG Adapter... and flash the ROM using the Install Tab in TWRP Recovery.
Thanks for ultimate guide, I bricked my phone trying to root it and this guide just helped me revived my dead phone. Thanks a bunch!
Just so everyone knows, when I phone was dead, it was just dead, I pressed the power button for several min, no response, completely black screen, while putting on charge, there was no light. So no sign of life at al.
Now it's revived and I have successfully rooted and installed AICP ROM.
help!
bocondo said:
Thanks for ultimate guide, I bricked my phone trying to root it and this guide just helped me revived my dead phone. Thanks a bunch!
Just so everyone knows, when I phone was dead, it was just dead, I pressed the power button for several min, no response, completely black screen, while putting on charge, there was no light. So no sign of life at al.
Now it's revived and I have successfully rooted and installed AICP ROM.
Click to expand...
Click to collapse
Hello, I have exactly the same problem you had. How did you enter qfil mode when the smartphone was no longer responding. The software flashone me brand to re-connect me in flash mode. But the screen is still black. Thank you in advance.
help!
Hello.
I have a leeco x722. I tested everything I could find but my smartphone is still in hard brick. No reaction, no sound, no vibration, no led, no screen.
It is still detected by the software flashone in QFIL. I have tested a lot of QFIL file but it still marks me "QFIL flash failed, please re-enter into the flash mode!" I try to stay pressed on the volume and power buttons and re-flash but still the same. Would you have a trick to switch to QFIL mode by being in hard brick. Or do you have a QFIL file for x722 and not x720.
Thank you.
QFIL X722
Hey! "Accidentally" Bricked my phone on pure stupidity. Is there any QFIL for the Le Pro 3 Elite X722 I need it so badly to have a chance to bring my phone back to life.
Tried your file but im getting this error:
6:46:51: ERROR: function: rx_data:247 Error occurred while reading from COM port
06:46:51: ERROR: function: sahara_main:854 Sahara protocol error
06:46:51: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Thanks in advance
konevolan said:
Hey! "Accidentally" Bricked my phone on pure stupidity. Is there any QFIL for the Le Pro 3 Elite X722 I need it so badly to have a chance to bring my phone back to life.
Tried your file but im getting this error:
6:46:51: ERROR: function: rx_data:247 Error occurred while reading from COM port
06:46:51: ERROR: function: sahara_main:854 Sahara protocol error
06:46:51: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Thanks in advance
Click to expand...
Click to collapse
Did you solve this problem? I made the same error with the X722 and am in exactly the same situation.
Qfil gives the same error. In an attempt, Qfil was able to download FireHose, but content.xml was in error. After that, I could no longer get Qfil down Firehose. And now this message always appears.
I already know that it is possible, just not how to get around this problem of Qfil.
after do that my storage show 9gb after format data and stock rom install and again formad sd card vs... but i cant up the storage more than 20gb
when i install the stock rom it show i have 32gb storage but computer says 19gb
i installl omni rom its says 24gb and comouter says 19gb again i stuck here what cani do ?
Related
A friend of Mine gave me his phone(LG G4 H818p) for a try as It was hard bricked by a local phone shop person by flashing wrong version(H815). Now the phone is in no condition to be turned on and the only thing happens while connecting it to PC is the Qualcomm HP-USB QDLOADER 9008.
Now I can't access Download mode/bootloader/Recovery of the phone, No led blinking.
What I have for the flashing:
1. Stock KDZ of Algeria(I did not find any other than this and links of LGfirmwares were not working)
2. QPST (tried QFIL with selecting prog_emmc_firehose and the two XML's from 8675_W00 but it didn't work as I got this error Download fail: Sahara fail value can't be null.)
3. KDZ extractor
4. LG flash tool
5. Drivers- Qualcomm and LG
Also, I googled everything but did not find a single result related to this model.
So If there is something that would do the magic to turn the phone on and You know it then Please share and Help.
Log of QFIL-
Process Index:0
Programmer Path :\New folder\prog_emmc_firehose_8936.mbn
Image Search Path :\New folder
Please select the XML file
Start Download
Program Path :\New folder\prog_emmc_firehose_8936.mbn
COM Port number:23
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
bludyvenom said:
A friend of Mine gave me his phone(LG G4 H818p) for a try as It was hard bricked by a local phone shop person by flashing wrong version(H815). Now the phone is in no condition to be turned on and the only thing happens while connecting it to PC is the Qualcomm HP-USB QDLOADER 9008.
Now I can't access Download mode/bootloader/Recovery of the phone, No led blinking.
What I have for the flashing:
1. Stock KDZ of Algeria(I did not find any other than this and links of LGfirmwares were not working)
2. QPST (tried QFIL with selecting prog_emmc_firehose and the two XML's from 8675_W00 but it didn't work as I got this error Download fail: Sahara fail value can't be null.)
3. KDZ extractor
4. LG flash tool
5. Drivers- Qualcomm and LG
Also, I googled everything but did not find a single result related to this model.
So If there is something that would do the magic to turn the phone on and You know it then Please share and Help.
Log of QFIL-
Process Index:0
Programmer Path :\New folder\prog_emmc_firehose_8936.mbn
Image Search Path :\New folder
Please select the XML file
Start Download
Program Path :\New folder\prog_emmc_firehose_8936.mbn
COM Port number:23
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
try this https://forum.xda-developers.com/g4/help/mbn-msm8992-qpst-2-7-430-unbrick-g4-t3292097
Please help me..
My h818p is hard bricked,,,no charging..no boot..no anything... Please help me anyone
Hi every body, I had reviced a lot of question about how to backup qualcomm devices. So today I will show you how! (test in Obi SF1)
Because if your phone is not root, you can't back up your rom in case brick when you play with the phone. So you will need this!!!
1: Download all necessary files (in my video description) put all of them in the same folder and extract out!
2: in stall the right driver (make sure your usb connect type is MTP)
When your phone and computer are connected and in devices manager you see some thing with a yellow triangle and the QFIL software show “no port available” that mean you need driver!
To install the driver, run qualcomm_Setup as administrator! Restart your computer. If success, no more yellow triangle in devices manager.
3: now put your phone into download mode by: install QPST.2.7.437 to your computer. Then run eMMC Software Download, chose switch device to DLOAD…> chose your phone >ok, now you will see several new hard disks in your computer , and in device manager you will see something like qualcomm emmc or qualcom mmc... in hard disk field! now close the eMMC Software Download software.
4: Run HDDRawCopy1.10Portable, chose Qualcomm MMC Storage USB Device (your phone flash) then click continue > double click on file > browse to pale you want to save the backup file > name the file, in file type field, chose raw img file > save > click continue and wait to complete (it may took along time depend on your memory size)
To wake up the phone out of download mode, just press all three hard buttons same time in 2 minutes !!! (for Obi phone, may different in other phones).
Link to this document in description too!
Attention: this method no need root, and you will have the full rom back up. But be careful if you chose wrong field you may miss your hard disk’s data, and when you apply the back up again to your phone your phone will really hard brick if you break the process. So if you had rooted the phone, use another method for better!!!
Guide video and tool links here:
If read back gets interrupted in between will it brick ?
Demon_king18 said:
Hi every body, I had reviced a lot of question about how to backup qualcomm devices. So today I will show you how! (test in Obi SF1)
Because if your phone is not root, you can't back up your rom in case brick when you play with the phone. So you will need this!!!
1: Download all necessary files (in my video description) put all of them in the same folder and extract out!
2: in stall the right driver (make sure your usb connect type is MTP)
When your phone and computer are connected and in devices manager you see some thing with a yellow triangle and the QFIL software show “no port available” that mean you need driver!
To install the driver, run qualcomm_Setup as administrator! Restart your computer. If success, no more yellow triangle in devices manager.
3: now put your phone into download mode by: install QPST.2.7.437 to your computer. Then run eMMC Software Download, chose switch device to DLOAD…> chose your phone >ok, now you will see several new hard disks in your computer , and in device manager you will see something like qualcomm emmc or qualcom mmc... in hard disk field! now close the eMMC Software Download software.
4: Run HDDRawCopy1.10Portable, chose Qualcomm MMC Storage USB Device (your phone flash) then click continue > double click on file > browse to pale you want to save the backup file > name the file, in file type field, chose raw img file > save > click continue and wait to complete (it may took along time depend on your memory size)
To wake up the phone out of download mode, just press all three hard buttons same time in 2 minutes !!! (for Obi phone, may different in other phones).
Link to this document in description too!
Attention: this method no need root, and you will have the full rom back up. But be careful if you chose wrong field you may miss your hard disk’s data, and when you apply the back up again to your phone your phone will really hard brick if you break the process. So if you had rooted the phone, use another method for better!!!
Guide video and tool links here:
Click to expand...
Click to collapse
Hi ,
Thanks for the video link. I want to use this so that I can get boot image and recovery image so that it can be ported . My phone is Gionee M6S plus Snapdragon chipset with locked boot loader. I would like to ask while In reading mode ,if by unforseen reason the readback gets interrupted ;is there any chance of hard bricking ?
Thanks
Suhi02 said:
Hi ,
Thanks for the video link. I want to use this so that I can get boot image and recovery image so that it can be ported . My phone is Gionee M6S plus Snapdragon chipset with locked boot loader. I would like to ask while In reading mode ,if by unforseen reason the readback gets interrupted ;is there any chance of hard bricking ?
Thanks
Click to expand...
Click to collapse
Nope, in backup process just don't format or delete any any thing in your phone's internal memory, your phone will be ok. But when you restore the phone, if the process broke, your phone maybe brick depen on how many percen had complete!
how to restore?
Hi,
thanks for this tutorial but i have a question, my device is Asus Zenfone 4 Selfie Lite ZB553KL (Sd425), i want to know how to wake my device from download mode before i start this tutorial as i dont want to brick my device
Can we backup full boot.img and system.img with that?
Or does it only backup data partition?
skeleton1911 said:
Can we backup full boot.img and system.img with that?
Or does it only backup data partition?
Click to expand...
Click to collapse
When you using this method, it will backup all of your partition: boot, recovery, efs, system, and user data too!
Rempoiiii said:
Hi,
thanks for this tutorial but i have a question, my device is Asus Zenfone 4 Selfie Lite ZB553KL (Sd425), i want to know how to wake my device from download mode before i start this tutorial as i dont want to brick my device
Click to expand...
Click to collapse
For my device (Obi Sf1) just long press (may up to 3 minutes) all of my 3 hard buttons to wake him up!
irwan_dcp said:
how to restore?
Click to expand...
Click to collapse
Sorry, my phone had lost, so i can't made a guide video for you. But there is a guide here: https://www.droidsavvy.com/unbrick-qualcomm-mobiles/
Hope usefull!
Nice tutorial but eroor 0x80004005 when pressing download mode
Nice tutorial thanks, but I'm getting error code 0x80004005 after pressing download mode, trying to backup huawei scl-l01 in QC 9008 mode port is visible drivers are ok
Hi @Demon_king18, sorry for bringing this old thread back up but I am having the same problem as @Provokuoji is.
When I open emmc software download app, and I try to switch to DLOAD, I get this message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the only thing stopping me for now. Might you know what is happening? :crying:
Hi @Demon_king18, sorry for bringing this old thread back up but I am having the same problem as @Provokuoji is.
When I open emmc software download app, and I try to switch to DLOAD, I get this message
This is the only thing stopping me for now. Might you know what is happening? :crying:
Getting the 0x80004005 error also. Any suggestion? The phone shows up as qualcomm device just fine.
find another way to boot into EDL mode. usually you have a timeout ~30 sec
Can we restore userdata with qfil ?
aIecxs said:
find another way to boot into EDL mode. usually you have a timeout ~30 sec
Click to expand...
Click to collapse
There is no other way to boot into EDL if your screen is completely blacked out and all what the computer recognises is a Qualcomm device in Device Manager.
deep flash cable? test point method?
aIecxs said:
deep flash cable? test point method?
Click to expand...
Click to collapse
I have a cable and it doesn't work.
I took my phone apart and did the test point shorting, that doesn't work either.
I have also been told that the phone is already in EDL mode but the problem is me getting that error message!
if it is already in EDL mode, just install Qualcomm HS-USB QDLoader 9008 Driver
aIecxs said:
if it is already in EDL mode, just install Qualcomm HS-USB QDLoader 9008 Driver
Click to expand...
Click to collapse
Done that from the start.
Hi, I decided to write here, I hope you can help me out.
So today I tried to root my phone with the instructions found at https://forum.xda-developers.com/showpost.php?p=68696079&postcount=114
I checked that my build no. is S288, so with rooting there would be no data loss for me (I still backed up everything important of course)
First problem I came across was that I had to found how to download QFIL, I downloaded and installed version 1.0.0.2 I think.
Second was that I couldn't get the Qualcomm Com port to show in QFIL neither in Device Manager. I figured out that as well, by doing loads of research (googling)
I also installed ADB to help me get into the state where I see the Qualcomm port, because normally if I just power it off, and connect it to my PC, it powers on in the "charging interface"
So everything was working, I downloaded the P1a42_S288_160721_ROW_RAW_QFIL file, extracted it, filled in everything in the QFIL program and hit Download while holding the + & - buttons to enter TWRP mode or whatever it is called. It returned with this:
Code:
PROGRAM: Send raw data fail
Failed to write I:\Telefon Ment�sek\Lenovo Vibe P1\Root (2017,03,11)\P1a42_S288_160721_ROW_RAW_QFIL\recovery_twrp.img to the device
Download Fail:System.Exception: Failed to upload the emmc images to the phone using Firehose
...
Download Fail: FireHose Fail FireHose Fail
Finish Download
Sorry, I can't write down everything bc I already closed the program, so I'm writing these off of screenshots
I already tried other USB cables, other USB ports, other drivers, even other ROMS, but everytime I try, I get this message:
Code:
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
So currently I can't power on the device in any way, tried holding + and -, + and power, - and power, home and power, home power and +, home power and -, home power + -
Please help me, I would be really glad Cheers!
Also, sorry if my English is a bit poor, I'm a 15 year old boy who's native speaking lang is not English
P.S. I also don't know if I broke my warranty with this or not, because I technically have not rooted the phone, just did something else. And also, what if someone would've stolen it and I would've got it back and I wouldn't be able to turn it on because the thieves have broken it? (That is not the case right now, just asking).
PS 2: I have an alarm at 0:00 today, but I doubt that the phone is just gonna magically turn itself on for the alarm, we'll see. I may also try to leave the phone to completely discharge (I remember now why I didn't want to buy a phone with a built-in battery)
EDIT: I didn't mention, that the first time I tried to flash, I was using files from a Directory that's path contains both spaces and unknown (?) characters (é) (only unknown by the software) as seen above in the first box.
gabor6505 said:
Hi, I decided to write here, I hope you can help me out.
So today I tried to root my phone with the instructions found at https://forum.xda-developers.com/showpost.php?p=68696079&postcount=114
I checked that my build no. is S288, so with rooting there would be no data loss for me (I still backed up everything important of course)
First problem I came across was that I had to found how to download QFIL, I downloaded and installed version 1.0.0.2 I think.
Second was that I couldn't get the Qualcomm Com port to show in QFIL neither in Device Manager. I figured out that as well, by doing loads of research (googling)
I also installed ADB to help me get into the state where I see the Qualcomm port, because normally if I just power it off, and connect it to my PC, it powers on in the "charging interface"
So everything was working, I downloaded the P1a42_S288_160721_ROW_RAW_QFIL file, extracted it, filled in everything in the QFIL program and hit Download while holding the + & - buttons to enter TWRP mode or whatever it is called. It returned with this:
Code:
PROGRAM: Send raw data fail
Failed to write I:\Telefon Ment�sek\Lenovo Vibe P1\Root (2017,03,11)\P1a42_S288_160721_ROW_RAW_QFIL\recovery_twrp.img to the device
Download Fail:System.Exception: Failed to upload the emmc images to the phone using Firehose
...
Download Fail: FireHose Fail FireHose Fail
Finish Download
Sorry, I can't write down everything bc I already closed the program, so I'm writing these off of screenshots
I already tried other USB cables, other USB ports, other drivers, even other ROMS, but everytime I try, I get this message:
Code:
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
So currently I can't power on the device in any way, tried holding + and -, + and power, - and power, home and power, home power and +, home power and -, home power + -
Please help me, I would be really glad Cheers!
Also, sorry if my English is a bit poor, I'm a 15 year old boy who's native speaking lang is not English
P.S. I also don't know if I broke my warranty with this or not, because I technically have not rooted the phone, just did something else. And also, what if someone would've stolen it and I would've got it back and I wouldn't be able to turn it on because the thieves have broken it? (That is not the case right now, just asking).
PS 2: I have an alarm at 0:00 today, but I doubt that the phone is just gonna magically turn itself on for the alarm, we'll see. I may also try to leave the phone to completely discharge (I remember now why I didn't want to buy a phone with a built-in battery)
EDIT: I didn't mention, that the first time I tried to flash, I was using files from a Directory that's path contains both spaces and unknown (?) characters (é) (only unknown by the software) as seen above in the first box.
Click to expand...
Click to collapse
Dear Pls follow this link
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
You can see the qualcomm driver only when you switch off phone and hold Volume+/- plus power button.
I can't bc my phone won't turn on currently,
So I probably shouldn't have used ADB to get into fastboot or whatever, my phone may be broken because I tried to do the flash while in that state.
Did you read my whole post though?
The next thing I'll try then is uninstalling all the drivers and programs related to my phone, and then following the guide you suggested, because I still see the Qualcomm port, I just can't do anything with my phone.
OMG, I have waited a few hours, and just randomly thought why not try again flashing the rom (I don't think this is the right word for the QFIL Download procedure), and it worked! So I'm actually really happy I don't need to send it in to repair or try other things. I got the system I started the procedure with, so I didn't actually lost any of my files neither did I root my phone. Now to decide if I want to try again rooting it with the detailed instructions you sent or just leave it like this so I avoid getting into all this again. I think I will try again to root it lol why not
Will report back here if it was successful
I have successfully rooted my phone, and installed the Xposed Framework on my phone, so I'm really happy.
I can't really seem to find where to lock this thread so please someone lock this thread (I am not familiar with this forum, so I don't know if it is needed or not)
Hi all!
I was trying to recover my Oppo (with great imput from Jan.Pul from this forum) by using QFIL/MyFlash but the process failed a few times just at the end while waiting for the phone to reset:
.first attempt with this error message: "download fail: firehose fail fail to find qdloader port after switch"
.second attempt with this error: "download fail: Sahara FailSahara Fail"
Further playing with the tool gave similar errors.
MyFlash also gave error: "An attempt was made to load a program with an incorrect ......".
I've done all as in the link above but I believe those tips are specific for a Lenovo or Xiaomi phone rather than Oppo, something must be missing!!!
After all that, NOW my Oppo Find7a is totally gone:crying:. When restarting, it gets stuck at oppo logo and that's all. Going to recovery mode can't read any internal ROM cos for some reason all the files are gone and I can't transfer any files to internal memory either cos it's phone does not allow me any transferring.
Any help to resurrect my phone would be much more appreciated!:fingers-crossed:.
Cheers!
Jose
have you tried this ?
forum.xda-developers.com/find-7/help/how-to-debrick-unbricka-oppo-7-7a-t3717802
Dear XDA members,
I really sincerely apologize for my knowledge of English. I have a problem what i want to find solution about... I was installing LineageOS 14.1 via TWRP. Becouse my stock rom crashed and bootloop happened. So, I have installled the system and wanted to install GApps and after countless tries I was getting error message 70. Then I found tutorial how to resize /system partition via TWRP. After the resize process completed I left my N7 for the hour and then I came back I saw that it is locked and it's impossible to unlock... So that means I don't have acces to bootloader, fastboot etc. and my windows 10 PC recognizises it as "Qualcomm HS-USB QDLoader 9008 (COM3)". Then i found software called QPST and tried recovery via Qfil tool but i got Sahara error message, here are some entries from status log
Code:
ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes
ERROR: function: sahara_main:924 Sahara protocol error
ERROR:function:main:303 Uploading Image using Sahara protocol failed
[B]Download Fail:Sahara Fail:QSaharaServer Fail:Process fail[/B]
Before theese entries it threw some random mappings that are not understandable for me...
So here's a question, is this state recoverable? Does I have a chance to bring my N7 back to work?