Hi
I have a problem with my H815. In one moment i recognized that my LG G4 shows only LG boot logo.
I will make a hard reset. I have unlocked bootloader and imperium rom and kernel. After hard reset it
shows twrp recovery for a while and then stuck and then only green screen with text (on top - unknown reset)
And now it shows this green screen after a hardreset or during the second half of the hard reset.
Is there any way to try to repair it by myself?
Thanks Ondrej
gropa said:
Hi
I have a problem with my H815. In one moment i recognized that my LG G4 shows only LG boot logo.
I will make a hard reset. I have unlocked bootloader and imperium rom and kernel. After hard reset it
shows twrp recovery for a while and then stuck and then only green screen with text (on top - unknown reset)
And now it shows this green screen after a hardreset or during the second half of the hard reset.
Is there any way to try to repair it by myself?
Thanks Ondrej
Click to expand...
Click to collapse
Best bet would be to start over fresh reinstall firmware with lgup or flashtool and go from there
i cant instal firmware with lgup or flashtool. They didnt recognized the phone. The G4 didnt connect to the PC. Any other suggestions? O
Did you find the solution for this?
I have similar problem now.
I can get into fastboot mode, sometimes into download mode (but can't flash kdz) and TWRP. The problem in TWRP manifests when I try to flash new ROM (or whatever .zip file). I put it in freezer for couple of hours and successfully installed ROM while the phone was cold but didn't manage to boot into it.
Any suggestions?
Bullet92 said:
Did you find the solution for this?
I have similar problem now.
I can get into fastboot mode, sometimes into download mode (but can't flash kdz) and TWRP. The problem in TWRP manifests when I try to flash new ROM (or whatever .zip file). I put it in freezer for couple of hours and successfully installed ROM while the phone was cold but didn't manage to boot into it.
Any suggestions?
Click to expand...
Click to collapse
Check my signature for the bootloop fixit list.
Sent from my LG-H815 using XDA Labs
Related
Hi there,
I have a problem with my G PRO F240L...
I have perform a factory reset from android settings in order to sell my G PRO, and after the factory reset and the automatic reboot, device boots in recovery mode (CWM), i tried to turn off and boot again or to use the advanced menu to "reboot device", still go directly into CWM after the LG logo shows off.
If it's help, i followed this tuto to root + install CWM on my device : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/#
Thank your for you help
polux400 said:
Hi there,
I have a problem with my G PRO F240L...
I have perform a factory reset from android settings in order to sell my G PRO, and after the factory reset and the automatic reboot, device boots in recovery mode (CWM), i tried to turn off and boot again or to use the advanced menu to "reboot device", still go directly into CWM after the LG logo shows off.
If it's help, i followed this tuto to root + install CWM on my device : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/#
Thank your for you help
Click to expand...
Click to collapse
OK, my problem was Windows 8.1... The phone is well recognized by LG Tool under W7, but now I have another major problem, at the last step, when the tool begins to flash the rom, it goes until 5% and then this popup box blocks the flash "battery level is low and upgrade is unavailable"
I have reload fully my battery (I plugged it into the G PRO dock)... still the same message.
Any help please ?
Did you manage to resolve the issue? I am just having the very same problem and a bit lost and cannot risk flashing anything right now.
polux400 said:
OK, my problem was Windows 8.1... The phone is well recognized by LG Tool under W7, but now I have another major problem, at the last step, when the tool begins to flash the rom, it goes until 5% and then this popup box blocks the flash "battery level is low and upgrade is unavailable"
I have reload fully my battery (I plugged it into the G PRO dock)... still the same message.
Any help please ?
Click to expand...
Click to collapse
Have you rooted your device with cwm or twrp??
Sent from my LG-E988 using Tapatalk HD
conradwu said:
Did you manage to resolve the issue? I am just having the very same problem and a bit lost and cannot risk flashing anything right now.
Click to expand...
Click to collapse
Hello. sorry for the delay of answer !
I managed to resolve my problem with the shelp of the member shellnut2, developer of freegee OG Pro Edition I used to root and install cwm at the first time on my G PRO.
You can find how I did that reading these topics :
http://forum.xda-developers.com/showpost.php?p=48136185&postcount=268&nocache=1&z=3099481871415190
http://forum.xda-developers.com/showthread.php?p=48435445
I hope it will help you !!
ps : I have now sold my G Pro and bought a Note 3. Much better device.
Pleaseee help me!!!!!!
Hello, I would appreciate your help because I flinched and my tel ugly now this only in the LG logo screen. I wanted to update my original rom Phone factory and downloaded the latest version before upgrading but I did not wipe data and When there finished the process gave an LG IMS error stopped working this type, and there Could not get into hard reset on the way, OK up here but then I Decided to reinstall the rom again to see if it would correct the error and then I installed the previous version I had downloaded it and my phone is so in the logo screen. If I try to instal the updated rom, would be more risk? And I wonder if I can not like the ace debugging would access via adb and make wipe data factory reset only by simple USB connection? I can not I do the code by turning the volume down and holding power button goes not into hard reset the screen goes black and comes back on the LG logo... Pleaseeeeee help meee!!!!!!
excuse meI, DonĀ“t speak english, I am brazilian...
My phone is a LG G PRO F240L with ROM V9 Feiyu Upgrade for Rom stock V10Z Korea!!
help me
I have also same logo problem on my lg f240l.have u find any thing to solve it
Check my messages below. I gave my solution and 2 links which helped me.
do not use factory reset from android settings/
Flash this file to fix.
Help, i installed the twrp recovery and went about installing a rom but when i went to wipe the phone i wiped everything. So now when i try to boot into recovery it just shows the lg logo with the l.e.d cycling. No idea what to do please help.
Can you get into download mode, If so you can flash the stock .kdz for your device with the lg flash tool and you will a stock functioning phone agin. Then you can root and install TWRP again if you would like just like you did the first time. But make SURE that you use CORRECT kdz for your device model remove the batteries and under you should she something like this eith the X being numbers or letters: LG-XXXXX find the .kdz for the XXXXX value and flash it with the lg flash tool
Thanks alot, its working but its taking its time still only at 14%
Your welcome if you still need help just ask
G3 boots into firmware update only
I recently updated my lg G3 ( Google patch update named Aug-18-2015 etc) and it started to malfunction with resets, crashing and eventually got it stuck in boot loop. Then it booted into a green screen that said "demigod crash handler/tz crash" thrice. Instead of a hard reset I decided to using the lg mobile support tool to fix it. During the upgrade recovery my phone went into download mode/firmware update. I could see the progress bar moving and then get stuck and my mobile would switch off. Took out the battery, disconnected and reconnected the phone and tried the process all over again but in vain. I repeated this at least 8 times and eventually gave up. Now my phone is basically useless and only boots into firmware update. Hard reset doesn't work either. Can somebody please help me fix this?
Android version : 5.0
Kernel: 3.4.0
Firmware : v20t-ame-xx
Go to the site: http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ and search for your device and message me back if it works
red bleud led flash
after i installed twrp latest edition it won't boot into it and it gives me the red and blue led flash even trough the steps by suing the download mode it won't work
HELP PLEASE
Best regards
Exray_NL
hey guys my G4 apparently bootlooped itself for some reason so i factory reset it which didnt help. This lead me to use lgup to flash the same MM that the phone was running from a .kdz file. Now after the flash it just stays on the LG bootimg screen and wasn't booting up. I removed the battery and put it on again and this time the phone shut off. I also have no recovery mode and when i attempt to boot into download mode it just stays at the icon and doesn't go to the firmware update screen so ive been doing some research and it says the bootloader is most likely the problem. My computer also recognizes it as the 'qhsusb_bulk' error but i came across no solution.
Can anyone give me some advice on what to do here...thanks in advance
I flashed 30c firmware with flashtool 2014 over rooted 21a (i think) on my D855 from Greece. I selected the normal flash to keep my files and apps, phone mode: DIAG and didn't clear the update registry. Phone worked normal for a week and then went into a boot loop. The phone randomly restarts and goes into loops for a while and then snaps out of it.
I have tried the following and none have fixed the issue:
-Replaced the battery.
-Upgraded to 30f over lg pc suite hoping it would fix it but it didn't.
-Flashed 30c and 30f over LG Flash tool with CS_EMERGENCY mode and cleared the updated registry.
-LG Flash tool wont flash any older lollipop kdz I tried. The phone screen flashes once but stays at 0% and then I receive a phone disconnected message.
-Put the device into safe mode and used the option on lg pc suite to fix upgrade errors. Didn't fix anything lol
-Tried factory reset. Nothing happened after I selected the yes on the confirmation.
-Tried to use LGUP hoping to install a lollipop kdz but it gives me an error message that I have to select a known model. Restarting the app and the phone didn't work either.
-Tried a guide on how to unroot and return to stock with the kitkat .tot file .
I really have no idea what else to try. Any help would be greatly appreciated.
louster35 said:
I flashed 30c firmware with flashtool 2014 over rooted 21a (i think) on my D855 from Greece. I selected the normal flash to keep my files and apps, phone mode: DIAG and didn't clear the update registry. Phone worked normal for a week and then went into a boot loop. The phone randomly restarts and goes into loops for a while and then snaps out of it.
I have tried the following and none have fixed the issue:
-Replaced the battery.
-Upgraded to 30f over lg pc suite hoping it would fix it but it didn't.
-Flashed 30c and 30f over LG Flash tool with CS_EMERGENCY mode and cleared the updated registry.
-LG Flash tool wont flash any older lollipop kdz I tried. The phone screen flashes once but stays at 0% and then I receive a phone disconnected message.
-Put the device into safe mode and used the option on lg pc suite to fix upgrade errors. Didn't fix anything lol
-Tried factory reset. Nothing happened after I selected the yes on the confirmation.
-Tried to use LGUP hoping to install a lollipop kdz but it gives me an error message that I have to select a known model. Restarting the app and the phone didn't work either.
-Tried a guide on how to unroot and return to stock with the kitkat .tot file .
I really have no idea what else to try. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Replace the battery
I have the same problem and i got into the problem for the same reason.... the random rebooting that everyone says is down to the battery is something more sinister... i have tried 4 different batterys that work perfectly and it still happened i flashed a kdz and now i have a bootloop and no OS none of the other kdz files work neither do the tot files and lgup doesnt recognise my device... stuck...
Anik49 said:
Replace the battery
Click to expand...
Click to collapse
That's the first thing I tried on my list of failed attempts to fix the problem as you can see... Brand new battery. No change.
DjCaprio tried 4 different batteries as you can see.
This is just terrible!
louster35 said:
That's the first thing I tried on my list of failed attempts to fix the problem as you can see... Brand new battery. No change.
DjCaprio tried 4 different batteries as you can see.
This is just terrible!
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-...to-lp-using-lg-t3283912/post64597779......try to use this for flashing lolipop kdz...see what happen.
Anik49 said:
http://forum.xda-developers.com/lg-...to-lp-using-lg-t3283912/post64597779......try to use this for flashing lolipop kdz...see what happen.
Click to expand...
Click to collapse
I tried removing the battery while connected to the pc via usb already. The other trick that involves editing a file requires root.
My phone started flashing the blue screen of death today so I finally took it to LG so they can check it out. Either way thanks for trying to help.
Hello, (complete n00b here)
Several days ago I've tried to flash a 6.0 MM (from 5.1) to my LG G4 H815 phone. There was no option to do it automatically so I proceded to do it manually via flashboot.
I hard-bricked it to oblivion as in black screen, no response whatsoever.
While investigating @ the internet I've managed to understand I could get it fixed via quadcomm drivers (mode 9008).
Tried various "fixes" for H815 but was getting safari download errors. For some reason I tried a LS991 fix and it worked. When I started the phone it showed no logo but just a secure booting error 1006.
Still, could enter firmware download so I began to flash a lot of KDZ firmwares with no success.
LGUP shows my model : H81510H.
While in fastboot mode there is a note below (wasn't there the first time) with codes : 633 B46 or something like that.
While flashing anything it ALWAYS STOPS at 9% with a tot anti-rollback error. While flashing the code changes briefly where one can read smth like : LGLS991ZVA ver. 6.0
Managed to download some KDZ for that exact model, SAME ERROR. Tried to find / flash LS991ZVA with no success in finding a TOT file.
Also, managed to get ADB drivers up and it shows unauthorized in listing (LS991). Fastboot does not detect my device even in fastboot mode @ phone.
Please HELP!
Longbranch said:
Hello, (complete n00b here)
Several days ago I've tried to flash a 6.0 MM (from 5.1) to my LG G4 H815 phone. There was no option to do it automatically so I proceded to do it manually via flashboot.
I hard-bricked it to oblivion as in black screen, no response whatsoever.
While investigating @ the internet I've managed to understand I could get it fixed via quadcomm drivers (mode 9008).
Tried various "fixes" for H815 but was getting safari download errors. For some reason I tried a LS991 fix and it worked. When I started the phone it showed no logo but just a secure booting error 1006.
Still, could enter firmware download so I began to flash a lot of KDZ firmwares with no success.
LGUP shows my model : H81510H.
While in fastboot mode there is a note below (wasn't there the first time) with codes : 633 B46 or something like that.
While flashing anything it ALWAYS STOPS at 9% with a tot anti-rollback error. While flashing the code changes briefly where one can read smth like : LGLS991ZVA ver. 6.0
Managed to download some KDZ for that exact model, SAME ERROR. Tried to find / flash LS991ZVA with no success in finding a TOT file.
Also, managed to get ADB drivers up and it shows unauthorized in listing (LS991). Fastboot does not detect my device even in fastboot mode @ phone.
Please HELP!
Click to expand...
Click to collapse
H81510h is os version it is still at 5.1 I think....what may help is plug your phone in with lgup and drop the battery out of it then closes of LG up put battery back in and start LG up and find kdz that matchs your phone and make sure that it doesn't have anti rollback.....
stinka318 said:
H81510h is os version it is still at 5.1 I think....what may help is plug your phone in with lgup and drop the battery out of it then closes of LG up put battery back in and start LG up and find kdz that matchs your phone and make sure that it doesn't have anti rollback.....
Click to expand...
Click to collapse
Hello and thx for reply. I tried to do what u've said. It did something (I was looking for a while back). When I plug the cable back in, my windows 7 immediately installs quadcomm hs-usb driver (9008) and my phone acts as if it was dead. LGUP cannot find it in that state. I've been trying to QFIL the "proper" soft but it continues to pop different errors (using different QFIL versions). Either saharafail or some sort of download fail.
LGUP still presents an error (if I decide to "fastboot" it) @ 9% 0x2000, TOT antirollback version is smaller than device version.
How can I make sure I've got the proper KDZ without ANTI-ROLLBACK?
Longbranch said:
Hello and thx for reply. I tried to do what u've said. It did something (I was looking for a while back). When I plug the cable back in, my windows 7 immediately installs quadcomm hs-usb driver (9008) and my phone acts as if it was dead. LGUP cannot find it in that state. I've been trying to QFIL the "proper" soft but it continues to pop different errors (using different QFIL versions). Either saharafail or some sort of download fail.
LGUP still presents an error (if I decide to "fastboot" it) @ 9% 0x2000, TOT antirollback version is smaller than device version.
How can I make sure I've got the proper KDZ without ANTI-ROLLBACK?
Click to expand...
Click to collapse
This may help........
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
stinka318 said:
This may help........
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Click to expand...
Click to collapse
Thx again. Uppercut shows H81510H as LGUP did. Is it possible that it's somehow write-protected?
It confuses me, since during the firmware update on my phone, I get this small box below the picture showing wierd codes : 633A Bxx and when I'm trying to flash my phone, the code gets longer with LS991ZVA v6.0 and more other. It then stops.
Funny thing is, when I got the phone I couldn't even connect to the LG bridge to update it at all. I've managed to do it bugging the MTP protocol but THAT on the other hand prevented me from copying stuff / FLASH my phone to MM 6.0. Had to factory reset it back then and all went back to "normal" = LG couldnt detect my device but I could copy photos or stuff from it.
NOW, when my phone is bricked, LGbridge DETECTS my phone (in fastboot), downloads the newest KDZ update BUT cannot install it (same thing as in LGUP). Hence my question : is it somehow write-protected?
Longbranch said:
Thx again. Uppercut shows H81510H as LGUP did. Is it possible that it's somehow write-protected?
It confuses me, since during the firmware update on my phone, I get this small box below the picture showing wierd codes : 633A Bxx and when I'm trying to flash my phone, the code gets longer with LS991ZVA v6.0 and more other. It then stops.
Funny thing is, when I got the phone I couldn't even connect to the LG bridge to update it at all. I've managed to do it bugging the MTP protocol but THAT on the other hand prevented me from copying stuff / FLASH my phone to MM 6.0. Had to factory reset it back then and all went back to "normal" = LG couldnt detect my device but I could copy photos or stuff from it.
NOW, when my phone is bricked, LGbridge DETECTS my phone (in fastboot), downloads the newest KDZ update BUT cannot install it (same thing as in LGUP). Hence my question : is it somehow write-protected?
Click to expand...
Click to collapse
Have you tried to eset it by pushing power and volume own then when you see bootsplash then release power button and hen quickly push the power button again....
But in your case push power and volume down within the count or 20 then release power then push power button again and see what happens and then try the same thing on volume up......
Thanks for the reply.
I did what u've said. Despite no logo I tried to release power button for a second just after the screen's brightness goes up (I also get a small vibration @ start). Everytime I get secure booting error 1006 after a few seconds.
On the other hand when I did that with volume UP button there was no error but there was nothing aswell until I release power button in which case I got the secure booting error. All of the above tries were done with no USB connection with anything.
Longbranch said:
Thanks for the reply.
I did what u've said. Despite no logo I tried to release power button for a second just after the screen's brightness goes up (I also get a small vibration @ start). Everytime I get secure booting error 1006 after a few seconds.
On the other hand when I did that with volume UP button there was no error but there was nothing aswell until I release power button in which case I got the secure booting error. All of the above tries were done with no USB connection with anything.
Click to expand...
Click to collapse
Do try with usb s well it may do something r do nothing......
Can't tell atm since I gave it to professionals. I'll wait and see how it'll turn up. Thx for all the effort tho, was nice to tinker with a lil help
@Longbranch did you solve this problem ? I'm in the same state but my phone model is H810, everything else is the same as yours.
Nope, not really. I gave it back to the reseller and my money got returned luckily.
The professionals I refer to above did install a specific firmware for the ls991 type. Firmware ZVB I think. The only one appliable apparently. Anyways, as I suspected the ls991 type is for the US and therefore it didn't work in my country in EU. My sim card wouldnt work with it. Besides, without the sim card, the phone decided to freeze and die after several minutes every time I turn it on. Swapped for LG G5 and it's working flawlessly up until this day.
good for you, what i don't understand is that it's a h810 model but now identify as ls991 does that mean you can convert it just by a Qfil flash? I may try another model flash if can't find a suitable Rom for it
Longbranch said:
Nope, not really. I gave it back to the reseller and my money got returned luckily.
The professionals I refer to above did install a specific firmware for the ls991 type. Firmware ZVB I think. The only one appliable apparently. Anyways, as I suspected the ls991 type is for the US and therefore it didn't work in my country in EU. My sim card wouldnt work with it. Besides, without the sim card, the phone decided to freeze and die after several minutes every time I turn it on. Swapped for LG G5 and it's working flawlessly up until this day.
Click to expand...
Click to collapse
Chebhou said:
good for you, what i don't understand is that it's a h810 model but now identify as ls991 does that mean you can convert it just by a Qfil flash? I may try another model flash if can't find a suitable Rom for it
Click to expand...
Click to collapse
Yes! That's what I and neutrondev telling everyone :
do not use qfil without the knowledge about the result!
The only working firehose file available out there is for the ls991 and that means if you use it it will turn your device into a ls991 without any way to get back to your previous device model!!
.
Sent from my LG-H815 using XDA Labs
@steadfasterX since I have done it already is there any way to get it working even as an LS991 ?
here is what i did till now
the reason for using Qfill is that it went dead after flashing an H810 rom .
after that when it's in download mode it doesn't allow me to flash the ls911ZV5 ls911ZV6 ls911ZV6_12 roms that i found ( it says LS991ZVA )
so i went in fastboot and flashed boot/aboot/recovery....img extracted from the ls911ZV6 rom then it accepted the rom in download mode
but it is stuck in a hard bootloop ( reboots when it is getting in recovery but still has download mode yet no fastboot as before)
any thoughts ?
Chebhou said:
@steadfasterX since I have done it already is there any way to get it working even as an LS991 ?
here is what i did till now
the reason for using Qfill is that it went dead after flashing an H810 rom .
after that when it's in download mode it doesn't allow me to flash the ls911ZV5 ls911ZV6 ls911ZV6_12 roms that i found ( it says LS991ZVA )
so i went in fastboot and flashed boot/aboot/recovery....img extracted from the ls911ZV6 rom then it accepted the rom in download mode
but it is stuck in a hard bootloop ( reboots when it is getting in recovery but still has download mode yet no fastboot as before)
any thoughts ?
Click to expand...
Click to collapse
Yes it's possible. You can boot a h811 H815 or any other rom you like. Even LOS!!
Great right? BUT you are bounded to the ls991 modem and so you need to be in a sprint network to use telephony. That means the phone is now useless outside the US .
And you wrote you tried ls911 ROMs? I hope you meant ls991
I work on a fully working experience on every network though. Checkout my proof of concept for unlocking the bootloader thread
I can go into details on IRC if you like.
..
Sent from my LG-H815 using XDA Labs
@steadfasterX thank you for keeping up with me ! ( btw what room on IRC ?)
for now I have used Qfill again and got fastboot working again and flashed TWRP ( not sure where ! ) so when the phone is off and i plug the usb it boots to twrp ( but it doesn't in recovery )
normal boot will show "secure boot error 1002"
then i flashed twrp img to recovery partition using twrp but it didn't work in recovery ( still reboots after showing Recovery Mode loading screen )
also tried to load some roms on the device to try them but I got error "file too large for filesystem " when copying them .
atm I don't know the state I'm in and what should be next ?
btw here are the recovery log and dmesg
Chebhou said:
@steadfasterX thank you for keeping up with me ! ( btw what room on IRC ?)
for now I have used Qfill again and got fastboot working again and flashed TWRP ( not sure where ! ) so when the phone is off and i plug the usb it boots to twrp ( but it doesn't in recovery )
normal boot will show "secure boot error 1002"
then i flashed twrp img to recovery partition using twrp but it didn't work in recovery ( still reboots after showing Recovery Mode loading screen )
also tried to load some roms on the device to try them but I got error "file too large for filesystem " when copying them .
atm I don't know the state I'm in and what should be next ?
btw here are the recovery log and dmesg
Click to expand...
Click to collapse
Np we can bring you back to life but as already said without cell service. That's the price for the firehose and unlocked feeling you have now.
Did you found and read my thread here?
https://forum.xda-developers.com/g4/general/bl-unlock-unlock-bootloader-proof-t3648288
There you will find some more info and also the IRC details how you can find me. I'm online from Monday to Friday mainly.
It's much easier to talk in chat then here. once all the details are known I will provide a full guide.
.
Sent from my LG-H815 using XDA Labs