Please read original post before asking anything here!
Culateralligator said:
CYANOGENMOD 13 MARSHMALLOW 6.0.1
GALAXY ACE 2 GT i8160 by SergeyL
TWRP CHRONOKERNEL BASED SOURCES - BASE 6.0.1 CM13
I've translated from Russian with Google Translator the original thread of this ROM of @SergeyL.
I've made this thread just to have a suitable place to share our experiences and questions with this ROM.
DOWNLOAD CYANOGENMOD 13 STANDARD
There are two ROM versions, Standard and Full
Standard is "pure" CyanogenMod 13 and Full version has some extra features added by SergeyL
Full version's download links are posted periodically by @[-GuTi-] in this thread,
just look for last releases by reading latest messages
Swap Memories:
Now we have something like "swap memories"
Sdcard1 will forcibly be used by system for apps, images, etc.
Same like Sdcard0. But in File manager it'll look like Sdcard1
When you connect to PC, only Sdcard0 will be available (but actually it's Sdcard1)
To get "swap memories", first download THIS
Then open ROM file on your PC and replace its boot.img with new boot.img you have just downloaded
Finally, install ROM
Due to Ramdisk changes, don't install Chorno Kernel, 'cause all changes will be deleted
Optimizations:
There are 2 optimizations during installation.
Fast optimization: It's default one. It will boot faster the first time you install the ROM.
Full optimization: It will boot slowlier (+10' extra) for the first time, but ROM will be smoother.
To get full optimization, open CM13 zip file with your PC and edit build.prop (it's on /system), unzip and modify it
(e. g. with Notepad++) as explained below. Then replace original build.prop file with new one in the ROM zip.
Now you can flash ROM with full optimization.
HDPI MINI GAPPS 49 MB
OPENGAPPS PICO 45 MB
MINI GAPPS 8 MB
-INSTALL HDPI OR MINI GAPPS IF YOU HAVEN'T REPARTED MEMORIES-
Bugs:
You say
How to install?
1. Download CM13 and one of the GAPPS files
2. Copy the zips in the external memory card
3. Boot in CWM or TWRP recovery
4. For CWM: Select "Wipe Data / Factory Reset" - "Wipe cache" - "Wipe Dalvik"
5. Choose "Install Zip from external storage"
6. Select CM13 file
7. Choose "Install Zip from external storage"
8. Select GAPPS file
9. Go back to the root of the CWM, and select "reboot system now"
10. Done! First boot takes a while, be patient
11. Ignore message about SD card after CM13 first boot:
Formatting SDcard as internal storage will ruin it (don't format / encrypt)
Firmware required: Stock 4.1.2 Jelly Bean & Custom Recovery
Installation using temporary CWM 6.0.2.8 Recovery is not supported
Install first any updated CWM/TWRP Recovery: Chrono Kernel r2.24.5 (or newer) provides you CWM 6.0.5.1
If you don't know how to install a new kernel/recovery, pick HERE
Xposed for Marshmallow:
1. Boot on recovery, install and reboot system -it takes a while-
Pick HERE if you want latest version of Xposed
2. Install with File Manager
If you don't have Root access, pick HERE
Click to expand...
Click to collapse
Feel free to ask question about this rom here. I and everyone will help you!
I will not responsible for any damage by installing this ROM! But you can ask for help to me and anyone here
This rom crashed the browser and the gapps installer.
Have you been like that?
huynhtran38 said:
This rom crashed the browser and the gapps installer.
Have you been like that?
Click to expand...
Click to collapse
No, if you removed android system webview during install, both of these apps will force close because all they need webview for properly work.
Or you may need to give them fully permission.
But I have a question to you: you are vietnamese?
I do not understand. I followed the instructions correctly.
Can you just help me?
https://www.facebook.com/huynhtran38
.
huynhtran38 said:
I do not understand. I followed the instructions correctly.
Can you just help me?
(P/S:vâng! tôi ở Hải Dương, bạn ở Bình Định hả? đây là fb của tôi:
https://www.facebook.com/huynhtran38
. bạn có thể chỉ cho tôi cách sửa lỗi rom và apps này qua đó đc ko?)
Click to expand...
Click to collapse
Ok I will help.
Stay away of talking in any other language than English in XDA Threads. (Important rule!)
It you want to get support in Vietnamese, PM me
bien2004 said:
Ok I will help.
Stay away of talking in any other language than English in XDA Threads. (Important rule!)
It you want to get support in Vietnamese, PM me
Click to expand...
Click to collapse
You can write in English and after that translate into the language you prefer . But always first in English.
Culateralligator said:
You can write in English and after that translate into the language you prefer . But always first in English.
Click to expand...
Click to collapse
Ok, I mean that.
But why is the support so slow in main thread?
bien2004 said:
Ok, I mean that.
But why is the support so slow in main thread?
Click to expand...
Click to collapse
Well, that's simple, it's not a support thread. :good:
As I wrote at the begining of main post, I made that thread just to have a place to share the experiences and questions. That ROM is from SergeyL and the "official" place is Russian 4PDA.
Said this, I mainly don't update the thread because I'm not using this ROM nor this phone anymore. Just as mp3/FM player. Sometimes I have too much free time and I read the relevant part of the 4PDA post with google translator in the main post. But I must say, I don't need it, actually I'm just making things easier for the other users. But it's easy to find and install new updates. Just open 4PDA link on 2nd post and download latest ROM and swap storages file if needed.
Culateralligator said:
Well, that's simple, it's not a support thread. :good:
As I wrote at the begining of main post, I made that thread just to have a place to share the experiences and questions. That ROM is from SergeyL and the "official" place is Russian 4PDA.
Said this, I mainly don't update the thread because I'm not using this ROM nor this phone anymore. Just as mp3/FM player. Sometimes I have too much free time and I read the relevant part of the 4PDA post with google translator in the main post. But I must say, I don't need it, actually I'm just making things easier for the other users. But it's easy to find and install new updates. Just open 4PDA link on 2nd post and download latest ROM and swap storages file if needed.
Click to expand...
Click to collapse
Me too, I don't use this ROM anymore, but still using this phone. Google translator is too badly enough to read 4pda. I just open this thread to help others about installing and using this ROM.
As you know, all ROMs from Lollipop and more are slow, not stable. I recommend using Kitkat one for daily use. Lollipop is for low using. Marshmallow and Nougat is for beta and alpha user one.
swap after flash rom
hi, Thanks to you @Culateralligator, sergeyL.
I have installed this ROM, but I did not swaps yet. 1. How to swap after flash? 2. Can i Editing the bulid.prop with root explorer for optimazion.
thanks you very much
NB: @bien2004 .. i flash this ROM because of unsuccessful flashing the kitkat of ace2nutcer.
mcgfr19 said:
hi, Thanks to you @Culateralligator, sergeyL.
I have installed this ROM, but I did not swaps yet. 1. How to swap after flash? 2. Can i Editing the bulid.prop with root explorer for optimazion.
thanks you very much
NB: @bien2004 .. i flash this ROM because of unsuccessful flashing the kitkat of ace2nutcer.
Click to expand...
Click to collapse
1. This ROM have swap storage by default. But I'm not yet, go to ChronoKernel Settings -> Advanced -> ✓Swap storage
2. Yes, but do with caution.
Related
HYBRID 17.0 (I9000XWJW8)
This ROM comes in 2 Variants STANDARD & LITE Version
HYBRID STANDARD : All Stocks files themed as per current release and ported apps from NEXUS, SGS-2, ICS etc. No Additional Apps except stock or the apps which comes with firmwares.
HYBRID LITE : Lite ROM with Basic Essentianl functions and Features.
Click to expand...
Click to collapse
ro.build.id=GINGERBREAD
ro.build.display.id=XWJW8 HYBRID v17.0
ro.build.version.incremental=XWJW8
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Wed Jun 20 15:09:33 KST 2012
ro.build.date.utc=1340172573
ro.build.changelist=1152999
.................................................................................
I Will Develop and Modify this Release in phase using sub-version. i.e.
v13.0 Means DEODEXED+Rooted+SuperUSer ROM.
v13.1 Means 11.0+Extended Power Menu+Other Mods
v13.2 Means 11.2+Other Mods and Customizations.
and so on...
I will Release WIPE as well as NO-WIPE for all version, but if you are First time user then better is you use WIPE version first then for latter subversions use NOWIPE.
....................................................................................
Click to expand...
Click to collapse
WHATS IN THIS ROM - BASIC STUFF
Based on I9000XWJW8
--Multi-CSC
--Rooted
--SuperUser Installed
--Busybox Installed
--Deodexed
--Zipalign
--Data/App Enable
--App2SD support
--Bash Shell Support
--Included Kernel files cleaning script.
--Updated APN list
--SIP Support
--RTL Support (Right to Left Arabic, Farsi, Hebrew Support)
--RTL fonts Rendering
--ThunderBolt-v2.7.7
MOD's
--1% Battery Mod
--Extended Power Menu
--SystemUI Mod
--SIP Wifi/3G
--Overscroll Glow
--BLN Patch
--Disable scrolling cache for smoother scrolling
--SGS III Media Files (Ringtones, notifications etc)
Language and Keyboard Layouts:
Arabic, Afrikaans, Bhasha Indonesia, Bhasha Malaysia, Catala, Cesky, Cestina, Chinese(simplified), Chinese(tradional)Dansk, Deutsch, Eesti, English(US), English(UK), Espanol(ES), Espanol(US).Euskara, Farsi, Filipino, Francais, Francais(CA), Francais(CH), Galego, Hebrew, Hrvatski, Islenska, Italiano, Italiano(CH), Korean, Latviesu, Lietuviskai, Magyar, Nederlands, Norsk, Nyrosk, Polski, Portugues (BR), Portugues (PT), Russian, Romana, Slovencina, Slovenscina, Srpski, Suomi, Svenska, Tieng Viet, Turkce, Thai, Ukranian, Urdu etc
And Included all Value Addons of this release i.e. facelock, Photo Editor etc
*Included All Regular Mods like Mulitilanguage Rendring and Indic fonts, RTL(Arabic/urdu/farsi/hebrew Support), And various cosmetic stuff like flip window, statusbar icons, battery icons which i changed and forget to mention here.
Click to expand...
Click to collapse
MODEM: NEXUS S - CAPTIVE UCKF1 (ICS)
Click to expand...
Click to collapse
KERNEL: Semaphore 2.7.4sc (CF-Root + Voodoo Snd v10 + OC/UV + BLN)
Click to expand...
Click to collapse
Backup your important Data first before using this ROM.
REQURIMENTS
**First time user of this ROM use WIPE version.
--Some Kernel with CWM (Galaxian/CF-Root-Kernel etc)
INSTALATION
--Disable lagfixes/Ext4 before install
--wipe internal/USB memory twice after disabling lagfix and before starting installation.
--Put HYBRID ROM into your Internal/USB Memory
--Enter Recovery
--wipe data/tactory reset
--wipe cache partition
--wipe Dalvik cache
--Install zip from sdcard
--Choose HYBRID ROM and flash
Click to expand...
Click to collapse
LINKS
HYBRIDROM
=======
HYBRID-v17.0-I9000XWJW8-DEODEX-LITE-WIPE VERSION : DIRECT LINK
=======
HYBRID-v16.0-I9000ZSJW4-DEODEX-LITE-WIPE VERSION : DIRECT LINK
HYBRID-v16.0-I9000ZSJW4-ODEX-LITE-WIPE VERSION : DIRECT LINK
=======
HYBRID-v15.0-I9000XWJW6-DEODEX-LITE-WIPE VERSION : DIRECT LINK
HYBRID-v15.0-I9000XWJW6-ODEX-LITE-WIPE VERSION : DIRECT LINK
=======
HYBRID-v14.1-I9000XWJW5-DEODEX-LITE-WIPE VERSION : DIRECT LINK
HYBRID-v14.1-I9000XWJW5-ODEX-LITE-WIPE VERSION : DIRECT LINK
HYBRID-v14.1-I9000XWJW5-DEODEX-STANDARD-WIPE VERSION : DIRECT LINK
HYBRID-v14.1-I9000XWJW5-ODEX-STANDARD-WIPE VERSION : DIRECT LINK
=======
Click to expand...
Click to collapse
No Wipe Version
Use WinRar or 7Zip
1.Download NO-WIPE PATCH file.
2. Extract Patch File at Desktop
3. Open HYBRID ROM using WinRar
4. Replace META-INF foler of HYBRID ROM using Patch file META-INF
5. Overwrite if Asked.
6. Done.
Now ROM will be NO-Wipe Verson
Click to expand...
Click to collapse
This Credit List Become very Long so i triming it:
# All those people who Spare their precious time for development, All those people who Report Minor bug also, All those who Started any thread by which i learn many stuff and All of them those who indirectly or directly help me and All those people WHOME NAME I FORGET
Disclaimer: If you using HYBRID ROM, As a user you are responsible to have the necessary third party software licenses when trial period is expire or for unlocking restected features. I will not promote warez, I created this version for test and explore various applications which are usefull for day to day usage.
Click to expand...
Click to collapse
Check Post 3 for Old ROMs
Screens OF HYBRID 17.0 I9000XWJW8
Old versions
This section i shifted on facebook, visit facebook page for more information
LINK FOR OLD VERSIONS
Click to expand...
Click to collapse
APN patch is CWM package
SGS_Talk2_AV is CWM package
CF-Root-ext4 and sgs-kernel flash u have to unzip and install like normal application.
... screenshot please.
thank you sajidmkhan i will test it
congratulation...
i know you from F1 thread...
now you have cook your own rom...
im so jelouse....
awandroid89 said:
congratulation...
i know you from F1 thread...
now you have cook your own rom...
im so jelouse....
Click to expand...
Click to collapse
Hey
I already mention i am not developer, developer always busy in competetion, i am sgs user and i know what user want so i cook this ROM as a user. its not my ROM, this belong to those who going to use it.
very nice...one question --> what is the name of that OC widget on the second screenshot??
musmax said:
... screenshot please.
Click to expand...
Click to collapse
screenshot updated
s_o_r_e_n said:
very nice...one question --> what is the name of that OC widget on the second screenshot??
Click to expand...
Click to collapse
Android Overclock, its just like SetCPU but this is beautiful
Because I am using a SGS for the job, so I can not install this time and try, I would someone who may have tried this ROM, to share his observations. Im very intersesting flash this for longer time for use if it all right with this ROM.
Thanks sajidmkhan
Regards
in my opinion surprisingly fast,and still no problems so far...tried almost every rom for i9000
Looks Promising! can you make non-wipe Rom, as i would not like to install again 100+ apps...
Thanks...
susheelnamdeo said:
Looks Promising! can you make non-wipe Rom, as i would not like to install again 100+ apps...
Thanks...
Click to expand...
Click to collapse
Tonight porting more SGS2 apps and something from nexus. as its done i will release wipe as well as no wipe version....
Good ROM
Few issues..
1. Stock browser drags
2. Wifi doesn't work..
3. missing GMail app - was it removed on purpose?
will try with a different kernel now
EDIT: Flashed CF Kernel -- Still no luck with wifi -- Please check!
mohanindia said:
Few issues..
1. Stock browser drags
2. Wifi doesn't work..
3. missing GMail app - was it removed on purpose?
will try with a different kernel now
EDIT: Flashed CF Kernel -- Still no luck with wifi -- Please check!
Click to expand...
Click to collapse
wifi issues is related to either kernel or android policy, so about andriod policy i just checked and all is ok.
your wifi issue cuz of your old kernel, i think your last kernel was speedmod
had you wipe internal/usb memory after disabling lagfix?
check screen, i just tested with CF-Root JVR kernel
browser issue is of JVR, i can replace it with old one but i didnt want to put anything from older version, in few days browser will be modded, till then you can use firefox
gmail app is removed cuz planning to put enhance email app. just testing somestuff, as it finish i will put updates.
sajidmkhan said:
wifi issues is related to either kernel or android policy, so about andriod policy i just checked and all is ok.
your wifi issue cuz of your old kernel, i think your last kernel was speedmod
had you wipe internal/usb memory after disabling lagfix?
check screen, i just tested with CF-Root JVR kernel
browser issue is of JVR, i can replace it with old one but i didnt want to put anything from older version, in few days browser will be modded, till then you can use firefox
gmail app is removed cuz planning to put enhance email app. just testing somestuff, as it finish i will put updates.
Click to expand...
Click to collapse
Ok...i was on the surface rom before flashing this rom and since it was a wipe.version didnt bother to do a factory reset...flashed on top of it...do i need to do a factory rest before i flash this rom again? i flashed cf ketnel but in recovery i see lot of errors...and the system wont reboot from the recovery...something went wrong..what cud be that?
Sent from my GT-I9000 using XDA Premium App
wifi works without problems,galaxian kernel
mohanindia said:
Ok...i was on the surface rom before flashing this rom and since it was a wipe.version didnt bother to do a factory reset...flashed on top of it...do i need to do a factory rest before i flash this rom again? i flashed cf ketnel but in recovery i see lot of errors...and the system wont reboot from the recovery...something went wrong..what cud be that?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
There you are, you know max error comes by Ext4, whatever you getting is mounting error, your cwm didnt able to mount partation.,
1st Try to factory reset (i didnt think its work but if you are lucky then might it will work)
if its not work then flash stock ROM by odin and remember always, never use ext4 if you didnt required it, RFS is not bad at all
after flashing stock rom flash any kernel except speedmod (90% wifi issue comes when you flash other kernel over speedmod)better is flash Galaxian so by that you got CWM and then flash HYBRID ROM..
Try to wipe your internal/usb twice cuz if your previous ROM had partial busybox enable then its created devilk-cache partation on your internal/usb memory card.
sajidmkhan said:
There you are, you know max error comes by Ext4, whatever you getting is mounting error, your cwm didnt able to mount partation.,
1st Try to factory reset (i didnt think its work but if you are lucky then might it will work)
if its not work then flash stock ROM by odin and remember always, never use ext4 if you didnt required it, RFS is not bad at all
after flashing stock rom flash any kernel except speedmod (90% wifi issue comes when you flash other kernel over speedmod)better is flash Galaxian so by that you got CWM and then flash HYBRID ROM..
Try to wipe your internal/usb twice cuz if your previous ROM had partial busybox enable then its created devilk-cache partation on your internal/usb memory card.
Click to expand...
Click to collapse
i didnt convert to EXT4...was on RFS...you are right...i couldn't even try TB..as the busybox was corrupted...
how to wipe the internal usb/drvie -- a hard reset or?
i flashed Stock JVR now...
*** DISCLAIMER ***
I work on projects that may brick your device. Don't sue me, hate me or try and kill my dog if that happens. I will feel bad the community will feel bad and hopefully we'll find a way to get you going again. But, the very nature of my projects involves a certain amount of risk taken by YOU. And by using the projects that I work on, you've accepted that fact.
WARNING #1: CURRENTLY THERE IS AN UNKNOWN ISSUE WHERE IF YOU HAVE ENCRYPTION ENABLED AND INSTALL SS IT BOOTLOOPS. IF YOU FIT THIS DESCRIPTION PLEASE STAY AWAY FROM SAFESTRAP FOR NOW.
USEFUL LINK OF TW ROMS:
http://forum.xda-developers.com/showthread.php?t=2616221
CURRENT PROJECT STATUS:
v3.72 (NB1): Beta testing, no rom-slots
v3.71 (MK2): Debugging some rom-slot issues
v3.65 (TW4.2): Stable
WHAT IS SAFESTRAP?
Safestrap is a Bootstrap / Recovery for locked bootloader phones. The goal is to avoid touching your primary system (I'll call this "stock" system) and only flash or make large changes to another place on your phone that Safestrap treats as a "2nd system" (in this case, it's a series of virtual ROM slots located on the internal emmc area: "/sdcard"). Once installed, you will see a "Splashscreen" giving you the option to hit "menu" to enter recovery. The recovery portion of Safestrap is now based on TWRP 2.6.3.0 (a touch based recovery) and you can perform .zip installs, backups and restores here. The additional features I've added to TWRP are mostly located under the "Boot Options" menu:
Here you can create virtual ROM-slots (2 on the S4 due to partition size and internal space) for flashing ROMs. These ROM-slots allow for 3 different sizes of /data partitions: 1GB, 2GB and 3GB. NOTE: The bigger you make the /data partition the less room you will have to make other ROM-slots.
You can activate a new ROM-slot by choosing the slot you wish to make active and then selecting the "Activate" button. Once active, you will see the "rom-slot#" up in the top of the screen shown in green. If you make the "stock" ROM active, then you can see it in the top shown in red.
Once a ROM-slot is active, all actions you would normally perform using TWRP are directed to that ROM-slot. For example, "Install" to flash a .zip, backup and restore.
For more information you can read up here:
http://blog.hash-of-codes.com/how-to-safestrap/
HOW DO I INSTALL SAFESTRAP?
Requirement: Root
Requirement: Allow APK install from Unknown Sources
Download the Safestrap APK
Find the APK using a Filemanager tool and open it on your device, then click "Install".
(If updating from an existing Safestrap you might be warned that this will over-write the existing installation. Click the "Yes" equivalent to this message.)
Once installed, open up the Safestrap application as you would any other app.
Agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
Then use the "Install Recovery" button. You should see the current version down in the lower left corner of the window. And the "Status:" should say "Installed" when you're done.
From there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter Safestrap Recovery using the [ menu ] button.
That's it for the installation! Read below for a brief overview of Safestrap Recovery v3.x
HOW DO I ENTER RECOVERY?
During each reboot a splashscreen will be displayed showing whether the device is running a rom-slot or on the "Stock ROM".
Press under the button shown on the screen to either enter "RECOVERY" or "CONTINUE" booting.
By "under", I mean on the touch key portion of the front display on either side of the center button.
HOW DO I UPGRADE SAFESTRAP?
Push the APK up to your sdcard.
Boot back into the "stock" rom-slot.
Go into your old Safestrap app and use the "Uninstall Recovery" button
THEN, open a "file explorer" of some sort (even TW "My Files" will work)
Browse to where you pushed the APK
Click on it and install like normal
Once installed, open the APK
Grant SU access
Use the "Install Recovery" button
All set, now you can reboot and re-activate whatever rom-slot you were using
KNOWN ISSUES:
[v3.72] ROM-SLOTs aren't supported yet
[v3.72] "Reboot Recovery" doesn't work in the APK?
NEW TO v3.72:
TWRP 2.7.0.x update for the base recovery. This includes vibration support, backup time/date fixes and more.
ROM-SLOTs now have a 16gb size limit (vs 4gb previously) [THEY DON'T WORK YET IN KK THO SO BE PATIENT]
DOWNLOADS:
CONFIRM THAT YOU ARE USING AN AT&T SAMSUNG GALAXY S4 (NOT THE ACTIVE MODEL)
MAKE SURE IF YOU ARE UPGRADING TO v3.7x FROM v3.65 THAT YOU USE THE "UNINSTALL RECOVERY" BUTTON IN THE v3.65 APK BEFORE INSTALLING v3.7x.
NOTE: USE ONLY ROMS THAT MATCH UP WITH YOUR TOUCHWIZ VERSION. IF YOU'RE ON MK2 THEN ONLY USE ROMS BASED ON MK2 AND IF YOU'RE ON MF3 ONLY USE ROMS BASED ON MF3
FIND YOUR STOCK OPERATING SYSTEM VERSION BELOW AND USE THAT FILENAME:
FOR USERS OF NB1:
USE 3.72+:BETA Safestrap-JFLTE-3.72.apk (updated 2014-04-02)
FOR USERS OF MK2:
USE 3.71+:BETA Safestrap-JFLTEATT-3.71.apk (updated 2013-12-27)
FOR USERS OF MF3 (TW4.2):
LATEST FILE: Safestrap-JFLTEATT-3.65.apk (updated 2013-11-15)
Main XDA Downloads Page
Mirror 1 (Goo.im)
Mirror 2 (Crackflashers)
ALSO DOWNLOAD THE KERNEL MODULES .ZIP THAT MATCHES YOUR BUILD # (FLASH THIS AFTER ROMS):
MF3: http://forum.xda-developers.com/devdb/project/dl/?id=508
MK2: http://forum.xda-developers.com/devdb/project/dl/?id=3275
HOW TO MANUALLY REMOVE SAFESTRAP:
[ INSTRUCTIONS ONLY FOR PRIOR TO v3.65. REMOVE VIA APK FOR v3.70+ ]
Enter adb shell from your pc:
Code:
su
mount -o remount,rw /system
mv /system/etc/init.qcom.modem_links.sh.bin /system/etc/init.qcom.modem_links.sh
rm -rf /system/etc/safestrap
rm /system/etc/firmware/q6.mdt
ln -s /firmware/image/q6.mdt /system/etc/firmware/q6.mdt
mount -o remount,ro /system
As of version 3.6x, Safestrap Recovery is now based on TWRP 2.6.3.x. For more on TWRP you can visit their website: http://www.teamw.in/
WARNING: Safestrap is heavily modified to be "Safe" for your device. Do not download TWRP from their website and expect it to work the same way. Also TWRP does not support Safestrap, tho some issues that may come up will be TWRP dependant, please try and contact myself or look on the forums for your device for answers before hunting down TWRP people. They won't be able to help w/ Safestrap specific questions.
This thread is a development ONLY thread.
For discussion go here:
http://forum.xda-developers.com/showthread.php?t=2428254
XDA:DevDB Information
Safestrap Recovery v3.71 (JB) / v3.72 (KK), a Tool/Utility for the AT&T Samsung Galaxy S 4
Contributors
Hashcode, DeesTroy & TeamWin
Version Information
Status: Beta
Current Stable Version: 3.71
Stable Release Date: 2013-12-27
Current Beta Version: 3.72
Beta Release Date: 2014-04-02
Created 2013-09-18
Last Updated 2014-04-02
Reserved
KNOWN ISSUES:
Bluetooth remote control isn't working on rom-slots.
CHANGELOG:
[2013/11/13] TWRP updates
[2013/11/13] "toolbox" binary / symlinks in recovery fixed
[2013/11/11] Uninstall from the APK fixed
[2013/09/17] /sdcard mounting bugfix
[2013/09/17] Hijack improments to support default rootfs files
[2013/09/17] ROM-slot image creation bugfix for size > 2gb
[2013/09/12] Much improved block device handling
[2013/09/11] Bugfix in script translation
[2013/09/11] hijack / init.rc tweaks
[2013/09/11] Bugfix for display lag / buffering issue (WIP)
[2013/09/10] Adjust "ROM-slot" display in UI
[2013/09/10] /data/media handling changes
[2013/09/06] custom twrp.fstab files
[2013/09/06] /data/media handling changes
Reserved
KNOWN ROM INSTALL / ISSUES:
All TW-based ROMs. If you don't have wifi make sure to flash the kernel modules for your stock kernel version.
Looks promising,
Thanks
Sent from my GT-I9505G using XDA Premium HD app
Add the MF3 kernel module .zip to the "Downloads" section.
http://forum.xda-developers.com/devdb/project/?id=680#downloads
Keep this on your SD card and flash it to the ROM-slot AFTER flashing a rom.
This will update your kernel modules to match the MF3 kernel and restore function to: wifi, bluetooth, gps etc.
Thank you so much hash!
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
An at&t thread. Yes! andyfredrick
Sent from my Nexus 7 using XDA Premium 4 mobile app
Hashcode said:
Add the MF3 kernel module .zip to the "Downloads" section.
http://forum.xda-developers.com/devdb/project/?id=680#downloads
Keep this on your SD card and flash it to the ROM-slot AFTER flashing a rom.
This will update your kernel modules to match the MF3 kernel and restore function to: wifi, bluetooth, gps etc.
Click to expand...
Click to collapse
WIFI WORKS!!!!!!!! and so does everything else...
Hash can i backup my stock rom to the external sd card and than delete it so i get my 10gigs back? is that safe?
hope this helps out some people!!.. nice job man!! :good:
Just install gpe wifi gps work! i also went back to stock rom and everything worked perfect
Andrew149 said:
WIFI WORKS!!!!!!!! and so does everything else...
Hash can i backup my stock rom to the external sd card and than delete it so i get my 10gigs back? is that safe?
Click to expand...
Click to collapse
God , no!
Sent from my SPH-L720 using XDA Premium 4 mobile app
rebel1699 said:
God , no!
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well that sucks! i hate having only 3gigs of user space =[
Graviton Rom works on SS... no issues at the moment ...what else are other users using?
---------- Post added at 07:12 AM ---------- Previous post was at 06:51 AM ----------
Can I flash performance mods zips only on slot 1 like killjoy or flyon mod etc? Or no because the stock kernel doesn't have init.d support?
Edit: as long as you flash to slot 1-4 everything will be safe. .. currently using darth stalker rom and that has init.d support, no issues at the moment.
HI
sykoj82 said:
Graviton Rom works on SS... no issues at the moment ...what else are other users using?
---------- Post added at 07:12 AM ---------- Previous post was at 06:51 AM ----------
Can I flash performance mods zips only on slot 1 like killjoy or flyon mod etc? Or no because the stock kernel doesn't have init.d support?
Click to expand...
Click to collapse
HELLO GREETINGS GUYS, GREAT JOB, I HAVE A DOUBT REGARDING THE SAFE ROMS SUPPORT STRAPS, AND ROM VERSIONS
1 - VERSION 4.3 SUPPORT? SS
2 - VERSION 4.2.2 SUPPORT? ROMS SUPPORT IS SS
3-THEME CAN FLASH MOD, ECT ..,?
* FINALLY HAVE MANY ROM Pacht LOKI LOKI IS DEVE install AFTER THE ROM OR NOT ONLY THE MODULE MF3? SORRY FOR MY ENGLISH I AM USING GOOGLE TRANSLATOR .. THANKS ..
HOLA CHICOS SALUDOS ,,GRAN TRABAJO,TENGO UNA DUDA EN CUANTO LOS ROMS SOPORTE PARA SAFE STRAPS,Y VERSIONES DE ROM
1- 4.3 VERSION SOPPORTE?SS
2- 4.2.2 VERSION SOPPORTE?SS CUAL ROMS SOPORTE
3-SE PUEDE FLASHEAR MOD THEME, ECT..,?
POR ULTIMO MUCHOS ROM TIENE LOKI PACHT SE DEVE INTALAR EL LOKI DESPUES DEL ROM O NO SOLAMENTE EL MODULO MF3 ? DISCULPEN POR MI INGLES ESTOY USANDO GOOGLE TRADUCTOR..GRACIAS..
So I've searched and searched, but can't seem to find a clear answer and I want to make sure of this before I try.
My "stock" ROMs are always CM-based 4.3 ROMs (haven't used TW in awhile). I got my S4 when it was still MDL so my qfuse isn't blown - so my intended use for this is only for the additional ROM slots. I have gathered that, at least for now, the only ROMs we can flash to the additional slots have to be TW or GPE 4.2.2. But my question is, does my primary ROM also have to meet that description? Or can I keep my 4.3 AOSP ROM as my primary?
AT&T Error
Hello,
I flashed the GEP rom to Rom Slot 1 and now I am getting an error that says Kernel Fail; System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help. There is a yellow triangle.
I followed the instructions, but now have a hosed phone unless I can somehow restore the backup of my stock rom.
Any information would be helpful.
Thanks for your efforts.
dtruong23 said:
Hello,
I flashed the GEP rom to Rom Slot 1 and now I am getting an error that says Kernel Fail; System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help. There is a yellow triangle.
I followed the instructions, but now have a hosed phone unless I can somehow restore the backup of my stock rom.
Any information would be helpful.
Thanks for your efforts.
Click to expand...
Click to collapse
Oh no...I hope I don't see that. I wish you luck! Was your phone encrypted to begin with?
Does anybody know why it would say this? Now I'm hesitant to flash anymore roms.
sykoj82 said:
Oh no...I hope I don't see that. I wish you luck! Was your phone encrypted to begin with?
Click to expand...
Click to collapse
Phone was not encrypted. I might have to take it in to AT&T or Best Buy Samsung Experience store. The phone gets into Download Mode, so at least that still works.
dtruong23 said:
Phone was not encrypted. I might have to take it in to AT&T or Best Buy Samsung Experience store. The phone gets into Download Mode, so at least that still works.
Click to expand...
Click to collapse
Wow...so far I flashed 2 different roms...I haven't tried the one you flashed...good luck to u... I'm definitely scared to flash any more roms...but you are 100% positive slot 1 was activated before flashing right? Thats the only thing I can think of that "stock" was activated..
dtruong23 said:
Phone was not encrypted. I might have to take it in to AT&T or Best Buy Samsung Experience store. The phone gets into Download Mode, so at least that still works.
Click to expand...
Click to collapse
What GPE rom did u flash?? did u flash the kernel module zip??
Hi all,
Seems there is a CM14.1 nightly now available for find7s on the official CM site, link here: hxxps://download.cyanogenmod.org/?type=nightly&device=find7s
Was just wondering if anyones given it a go yet, and if so knows whether or not it supports LVM and how stable the rom is?
Haven't found any info that states one way or the other, hoping someone knows.
Thanks in advance.
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Its a little bit weird that there is not available yet on the page https://www.cmxlog.com/14.1/
Hope it will appear here soon as well as it is already here:
(Find 7a) https://download.cyanogenmod.org/?device=find7
and
(Find 7) https://download.cyanogenmod.org/?device=find7s
Dirty flashed cm-14.1-20161205-NIGHTLY over cm-14.1-20161201-UNOFFICIAL via menu CyanogenMod updates. Everything seems to be OK. One remark: boot time when update is completed is quite long, so be patient. Of course in order to not see "SD corrupted" it is necessary to flash cm-13.0-find7-unified-storage-patch.zip
EDIT: Just for your information: boot animation CM face is gone. Now there is word "android" in plain white.
great news
Finally there we are changes logs:
https://www.cmxlog.com/14.1/find7/
https://www.cmxlog.com/14.1/find7s/
Android 7.1.1 in the next nightly
CyanogenMod will never support LVM.
This is 7.1 right? Or is it 7.0? I downloaded the 7.1 GAPPS, which should be correct for this build...
I updated it, and it runs smooth without any force crashes and nonsense. (Besides the time I tried to open an app not built for nougat, =P. If you're hesistant about updating, don't think, just do it.
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
Yup u can do that. After flashing cm14.1 official, u might wanted to flash cm13 patch by wuxianlin, then flash the gapps and lastly wipe the cache and dalvik
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
And yes you need to flash Wuxianlin's patch after every upgrade just for aesthetic purpose, that is to fix the SDcard damage info bug, unless CM find7 maintainer will fix that, and when it happen you will no longer need to flash the Wuxianlin's CM13 patch.
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
rafal.polska.b said:
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Click to expand...
Click to collapse
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
DELETE
Thanks everyone for the info, might hold off as I have LVM, here's hoping that namelessrom put out an official nougat rom in the not too distant future.
New Display is not supported
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
New Display is not supported. Colors, ghosting, and bleeding will still be running wild just like all older CM.
The only Custom ROM on the planet that fully supports new display is OmniROM and it seems that they could use some help. Please support their effort: omnirom.org
javier.pc said:
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
Click to expand...
Click to collapse
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Yashraj Chawla said:
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Click to expand...
Click to collapse
It is. But omnirom support substratum theme.
StormTrooper89 said:
It is. But omnirom support substratum theme.
Click to expand...
Click to collapse
I think you can install substratum theme in CM14.1 (but only substratum themes that support Android 7.1.1), since there no theme engine inside CM14.1
This tool/app will allow any number of ROMs to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (/system/multiboot, /cache/multiboot, and /data/multiboot). Because of the way this is implemented, no changes to the primary ROM are necessary
Donators
A huge thanks goes out to all of the donators for supporting this project! I if forgot to add you (and you want to be added), please send me a quick PM.
See all of our supporters here: https://gist.github.com/chenxiaolong/3f3fb485cbd0cb77c4281941433ec54d
It patches...
Custom kernels for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
NOTE: If you want to dualboot an EUI ROM, I highly recommend installing EUI as the primary ROM.
How to use the patcher
Android
Download the patcher apk and run it. Tap "Patch Zip File" from the navigation drawer and choose the file you want to patch.
Windows (GUI)
Double click DualBootPatcher.exe and choose the file you want to patch.
--------
After patching the zip file, a new file, like some_rom_dual.zip file will be created. For example, patching ktoonsez's
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013.zip
would create a new
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013_dual.zip
Instructions for dual booting
Before doing anything, download the Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
The patcher offers several locations for installing ROMs:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
With that said, let's get to the "how to"!
First, boot into your primary ROM and install the Dual Boot Patcher app
Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
Go to "Patch zip file" in the navigation drawer and patch the ROM or zip you want to install. You can select one of the installation locations described above.
There are two ways of flashing the patched zip file. You can either flash it normally from recovery or flash it using the in-app flashing feature. Both methods are explained below.
Flashing from recovery
To flash from recovery, just flash the patched zip file like you would for any other zip. Nice and simple.
In-app flashing
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.
A normal backup from recovery will backup every ROM. If you would like to back up ROMs individually, please see @rlorange's awesome tool: http://forum.xda-developers.com/showthread.php?t=2491299
How do I...?
Switch the ROM if something doesn't work properly?
You can flash the DualBootUtilities zip from recovery. It will provide a menu interface that allows switching to the various ROMs.
If you have TWRP, you can also switch manually by tapping Install -> Images (bottom right) -> Go to /sdcard/MultiBoot/[Your ROM]/ -> flash boot.img.
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Alternatively, flash the DualBootUtilities zip from recovery, which will also allow you to wipe a ROM.
NOTE: Don't use the recovery's built-in wiping abilities as that may delete non-primary ROMs!
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Downloads:
[LINK] Dual Boot Patcher (Snapshots) and DualBootUtilities recovery zip
Donations:
Donations are not required, but are greatly appreciated Donators will have their names listed in a nice big font on this post and will also be listed in the README file of the patcher.
Source code:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
Please note, any bugs regarding app itself can be created over at https://github.com/chenxiaolong/DualBootPatcher/issues
Any other device-specific stuff can be asked over here itself.
XDA:DevDB Information
Dual Boot Patcher, Tool/Utility for the LeEco Le 1S
Contributors
chenxiaolong, DroidThug, https://github.com/chenxiaolong/DualBootPatcher/graphs/contributors
Source Code: https://github.com/chenxiaolong/DualBootPatcher
Version Information
Status: Snapshot
Current Beta Version: 9.2.0.r25.g0638efb
Beta Release Date: 2017-04-11
Created 2017-04-11
Last Updated 2017-04-11
FAQ
What does this do:
It allows you to multiboot between ROMs
What does it require:
It requires an unlocked bootloader, and root access
I have problems regarding this app:
1. Post the MultiBoot.log from your internal storage
2. Describe the problems with details such as which ROM, Kernel etc, and which variant of device you own (e.g x501, x507 etc.)
Does it support VoLTE:
This is not related to the tool. Do not ask for it
Help! I hardbricked/softbricked my device:
Sure, just describe what you did exactly
___ MORE TO COME
Any builds from and after 9.2.0.r25.g0638efb dated Mon, 10 Apr 2017 timed 19:57:27 should be okay to use for Le 1S
Can you make video how to install and run this app
sumitgp said:
Can you make video how to install and run this app
Click to expand...
Click to collapse
There are some out in youtube. But they are kinda outdated. Maybe someone will make it in the near future
DroidThug said:
There are some out in youtube. But they are kinda outdated. Maybe someone will make it in the near future
Click to expand...
Click to collapse
Your welcome bro
And ur contribution marvelous
Just keep going we are with u
Love u bhai thanks
is it work on LETV Le 1s x507
thanks for app
Iam asking because I dont understand LeEco 1S Products
Because LeEco 1s is X509
LETV 1S is x507
Is it also works on LETV Le 1s x507? please
fire3k said:
thanks for app
Iam asking because I dont understand LeEco 1S Products
Because LeEco 1s is X509
LETV 1S is x507
Is it also works on LETV Le 1s x507? please
Click to expand...
Click to collapse
Yes it work on le 1s x507
sumitgp said:
Yes it work on le 1s x507
Click to expand...
Click to collapse
Thnaku very much
then I'll try
fire3k said:
Thnaku very much
then I'll try
Click to expand...
Click to collapse
Thanku Very Much
I installed DualBootPatcher in My Le1S x507
and installed anlogside EUI, LineageOS 14.1 and Resurrection Remix 5.8.2 .
and they both working fine and installed gapps in both ROMS.
But 1 problem: that I installed SuperSu in LineageOS 14.1 and its working fine but when I try to install Supersu in Resurrection Remix 5.8.2, it installed perfectly there is no errors but when I open SuperSu app in Resurrection Remix 5.8.2 , It said that su binaries not installed
then I try to install Magisk12 in Resurrection Remix 5.8.2 and it gives some error.Please Giveme some Suggetion how to install magisk
Note: before install magisk, I already Patched it for RR 5.8.2
fire3k said:
Thanku Very Much
I installed DualBootPatcher in My Le1S x507
and installed anlogside EUI, LineageOS 14.1 and Resurrection Remix 5.8.2 .
and they both working fine and installed gapps in both ROMS.
But 1 problem: that I installed SuperSu in LineageOS 14.1 and its working fine but when I try to install Supersu in Resurrection Remix 5.8.2, it installed perfectly there is no errors but when I open SuperSu app in Resurrection Remix 5.8.2 , It said that su binaries not installed
then I try to install Magisk12 in Resurrection Remix 5.8.2 and it gives some error.Please Giveme some Suggetion how to install magisk
Note: before install magisk, I already Patched it for RR 5.8.2
Click to expand...
Click to collapse
Bhai check devloper option if there is any setting for root
If this will not work then try to share apps (super su app)
If above mentioned methods not work then try isu (higher version) of super su u can found it on los site
Thanks and warm regards
sumitgp said:
Bhai check devloper option if there is any setting for root
If this will not work then try to share apps (super su app)
If above mentioned methods not work then try isu (higher version) of super su u can found it on los site
Thanks and warm regards
Click to expand...
Click to collapse
Thanks for sugestion
but there is no option in Setting or devoloper option in Resurrection Remix 5.8.2 . only setting available in Magisk manager but it displays message that there is no root in system. Also tried chainfire Supersu. installs SuperSu App and when I tried to open it displays that There is no root binaries. Please help.
root is functioning in Resurrection Remix 5.8.2, when I install ROM without Dual Boot Patcher. but Only installs One ROM at a time no multiboot. Please any suggestion?
Thanks For Dual Boot Patcher
Atlast Solved
First I Flashed Chainfire SuperSu, then reboot then check root , it failed, and then I reboot and flash Magisk 12 and reboot. This Time All Ok Root Succeded
thanks for the updates!
If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u
error
it shows error while booting 2nd rom
pravesh46 said:
it shows error while booting 2nd rom
Click to expand...
Click to collapse
What error? Be specific or give logs-,-
'have to try this! Thanks.
But, could this by any way interfer or get problem with F2FS formatted partitions (data,cache) ?
I'm also having some errors while installing the secondary rom...like extracting system errors
Hi! my Le1S gone in bootloop. Is there any solution to boot into the Primary ROM (i.e. eUI) via twrp? I have installed dual boot patcher & made eui as primary rom, lineage as secondary rom in "rrnougat" data slot & resurrection remix as secondary rom in " rrnougat2 " data slot.
From the past 2 weeks, I am using resurrection remix rom & sometimes eui. Today, I was on rr & my phone was hanging. So, I simply just restarted it & then, it gone in bootloop.
So, canI boot into my primary eui rom via twrp?, as dual boot patcher app cannot be accessed. Please help.
iamkamlesh said:
Hi! my Le1S gone in bootloop. Is there any solution to boot into the Primary ROM (i.e. eUI) via twrp? I have installed dual boot patcher & made eui as primary rom, lineage as secondary rom in "rrnougat" data slot & resurrection remix as secondary rom in " rrnougat2 " data slot.
From the past 2 weeks, I am using resurrection remix rom & sometimes eui. Today, I was on rr & my phone was hanging. So, I simply just restarted it & then, it gone in bootloop.
So, canI boot into my primary eui rom via twrp?, as dual boot patcher app cannot be accessed. Please help.
Click to expand...
Click to collapse
You can switch to other rom using dualbootutilities.zip. Just flash the zip . Then select ROM u want to switch & then select switch to..
After some hard work i like to share you the first working optimized stock rom from version 11M with stock kernel (for now).
This rom is a minimal rom, as i like it. No Google services or Framework inside.
I will provide extra packs for google stuff.
Main features:
- full deodexed
- De-bloated (Removed Google & some LG Apps)
- Kernel is free from dm-verity and root check
Tweaks:
- Jpeg and Video optimization
- remove some debug
- high Impedance Mode All The time (big thanks @Whiskeyomega)
- build.prop optimization
Installation:
You need an open Bootloader!
This rom is ONLY FOR H930!
You can flash the rom inside twrp.
After flashing the rom please install the neweset magisk root.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Then wipe Dalvik/ART and Cache.
Feedback:
If you find some bugs or something is not working correct, please contact me.
Future Release:
- include magisk installer
- include new modem
- you tell me
Download:
Version without Google:
https://drive.google.com/open?id=11Zy0Sac9LXZDqHODosPDBmsGtdedI8ob
Version with all Apps:
https://drive.google.com/open?id=18xDw6X5SYF9FBwZTyGWmEKthICWf5h08
XDAevDB Information
Debloated Stock ROM Open EU 11m
Contributors
djsven
Source Code: http://opensource.lge.com
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-01-25
Created 2018-01-25
Last Updated 2018-01-25
Downloading and testing right now! MANY MANY THANKS!!
You are the first one..
Thanks me after you test it
Dumb question now that i read it ... Google service and Framework free ... can i flash Gapps?
Not realy i guess..the gapps are for aosp roms ?
If, you do not flash this..
I will provide tomorrow an update packet for it.
Have you flashed the rom?
Dirty flashed from 10f for now. Google FC's as thought. Tried flash gapps but the same. Ok then i will restore twrp backup. Cannot test more after i am in montenegro the whole weekend where i have no time to test/flash more. Need a working system for the weeken. ....
Sent from my LG-H930 using XDA-Developers Legacy app
Oh wow....Yea i havent the time to fix my rom really. had problem after problem IRL so im glad someone else got there.
@ Whiskeyomega
Thanks
@ Mr. Schnabel
I will upload a new ZIP with Google Inside.
Flashing right now...
Edit1: No way... It tells me The encription did not succeed ! And i have to reboot the phone...
Thanks for your anwer.
So you did encrypt your phones data partition?
Realy strange.
Is this the only message?
My phone is not enctypted.
I will have a look on it.
djsven said:
Thanks for your anwer.
So you did encrypt your phones data partition?
Realy strange.
Is this the only message?
My phone is not enctypted.
I will have a look on it.
Click to expand...
Click to collapse
I followed the step from another user. I paste all steps.
"The order i flashed everything and how i set up everything was:
1) flash twrp and make sure it sticks
2) boot twrp
3) completly wipe /data, so twrp is able to mount it (you have to format the data partition.)
3.5) DONT reboot
4) flash no-verity-opt-encrypt-6.0.zip, root disabler and magisk
5) boot stock rom and setup everything (initial setup and so on)"
I wiped all data, system, internal, etc... also I formatted /data ....
I'll do some checks and I'll post the results.
Thx in advance
---------- Post added at 09:14 AM ---------- Previous post was at 08:58 AM ----------
It seems I partially solved. It boots but it stuck at "Checking for updates... This may take a minute or two"
Of course, as i saw, this rom does not include gapps so i'm unable to setup the google account, and that's why I select "set up as new".
Edit: I think i'm going to wait for the google framework included version How is it going?
Stock ROM with google is uploading now..
New Version with all google inside is up...
Would it be possible to flash micro gapps from opengapps onto the ROM with gapps removed?
Might try it out in a couple of hours and I'll report back.
djsven said:
New Version with all google inside is up...
Click to expand...
Click to collapse
It would be perfect if the gapps package incuded in the full version comes with some bloat
I mean movies, music, powerpoints, documents from google... For me this is bloat too
5 hours with the full version flashed and at the moment zero problems.
This is an idea..
Iam going to create a tool for deleting the bloatware which you want.
But my focus i on the kernel now.
Thanks for positiv feedback .-)
I need the phone working for the weekend but gonna definitely try this on Monday. Good work!
djsven said:
This is an idea..
Iam going to create a tool for deleting the bloatware which you want.
But my focus i on the kernel now.
Thanks for positiv feedback .-)
Click to expand...
Click to collapse
I'm trying again with the version without google and there is no way to enter the wifi key to continue. and it stops searching for updates. But it promises
Good job
fliky said:
Would it be possible to flash micro gapps from opengapps onto the ROM with gapps removed?
Might try it out in a couple of hours and I'll report back.
Click to expand...
Click to collapse
Just finished installing it with the no Google ROM and pico gapps it works great, just one hitch when installing I couldn't get the keyboard to come up on the screen.
Solved the keyboard issue by connecting an external keyboard and installing gboard from the play store.
Realy interesting.
@ fliky
Which keyboard you like to use?? Stock one or from google?
@all
This rom is the beginning!! The first one.
Now we have the base to do more.