Hi.
I'm new user of LGG6. Previous i was on Nexus devices.
Is there any way so set unlocking with fingerprint ONLY? So, without additioanl pattern, PIN or smth.?
Thank you!
I found that second security is needed only first time, after device boot if you use fingerprint screen unlock.
But, if I use DT2W unclok method I have to use PIN,/pattern ...
So, any way to remove that, BUT keep fingerprint unlock?
(i know i can remove screen lock method, but than fingerprint is automaticly removd too)
I removed this kind of protection on my Nexus, but it requires root.
Just add a trusted location etc then it will unlock with no passcode and fingerprint only.
akulp said:
I found that second security is needed only first time, after device boot if you use fingerprint screen unlock.
But, if I use DT2W unclok method I have to use PIN,/pattern ...
So, any way to remove that, BUT keep fingerprint unlock?
(i know i can remove screen lock method, but than fingerprint is automaticly removd too)
I removed this kind of protection on my Nexus, but it requires root.
Click to expand...
Click to collapse
Are you locking the phone using an app (like Nova Launcher) to double-tap to lock/sleep? if yes, then double tap the status bar to sleep. then you can wake the phone using fingerprint only.
basicreece said:
Just add a trusted location etc then it will unlock with no passcode and fingerprint only.
Click to expand...
Click to collapse
Ok, this is partial solution ... Just for added locations.
Thnaky anyway.
akulp said:
Ok, this is partial solution ... Just for added locations.
Thnaky anyway.
Click to expand...
Click to collapse
Also add a trusted device like a BT watch or I'm sure there is a always on you option. Detects when you have phone with you.
HKSpeed said:
Are you locking the phone using an app (like Nova Launcher) to double-tap to lock/sleep? if yes, then double tap the status bar to sleep. then you can wake the phone using fingerprint only.
Click to expand...
Click to collapse
Yap, I'm using NL.
Thanks! Nice solution, but it 'll be hard to get used to use just status bar to lock.
The best solution is this one, but it only works if you are rooted (+twrp) and i'm not sure if last root method allow to chainging files on /system partition:
Then while still in TWRP go delete /data/system/locksettings.db
This should let you swipe to unlock your phone. Your fingerprints will still be saved and can be used once you set up a secure lock screen
Beside I would like to stay without root if it's not necessary.
basicreece said:
Also add a trusted device like a BT watch or I'm sure there is a always on you option. Detects when you have phone with you.
Click to expand...
Click to collapse
I don't use BT watch, any device ... All I can set is home/work location and CAR BT.
I dont' see any other usefull option for me.
akulp said:
I don't use BT watch, any device ... All I can set is home/work location and CAR BT.
I dont' see any other usefull option for me.
Click to expand...
Click to collapse
"On body Detection"
basicreece said:
"On body Detection"
Click to expand...
Click to collapse
Ok, now I set "on body detection" ... but. That kind of smart locking only works if you don't lock phone with duble tap (over Nova launcher in my case) nut you leave phone to lock after time.
So this is usefull only if I don't lock with double tap. But I like that option and I'm using it all the time.
Thanks anyway for your time and tips.
Related
I was using NFC LockScreenOff Enabler on my Nexus 5 until the screen hardware died on me. Google is currently sending me a new one. I was MultiROM'ing Lollipop and tried the smart NFC unlock feature, but I didn't like it because you had to turn the screen on, hold the NFC tag, and swipe a swipe-to-unlock screen.
I have an NFC implant so i want the functionality just like NFC LockScreenOff Enabler. NFC polling with screen off, hold phone up to my hand, phone unlocks straight to home screen.
Is there a working solution for lollipop?
dimex said:
I was using NFC LockScreenOff Enabler on my Nexus 5 until the screen hardware died on me. Google is currently sending me a new one. I was MultiROM'ing Lollipop and tried the smart NFC unlock feature, but I didn't like it because you had to turn the screen on, hold the NFC tag, and swipe a swipe-to-unlock screen.
I have an NFC implant so i want the functionality just like NFC LockScreenOff Enabler. NFC polling with screen off, hold phone up to my hand, phone unlocks straight to home screen.
Is there a working solution for lollipop?
Click to expand...
Click to collapse
not currently, however there are several non stock lock screens that have this feature such as:
Tap Unlock or Uber Device lock
mbloomer04 said:
not currently, however there are several non stock lock screens that have this feature such as:
Tap Unlock or Uber Device lock
Click to expand...
Click to collapse
They're both ugly and not reliable, IMO. I couldn't even get Uber to work and sent the dev an email. He was a ****ing jerk and basically said I'm dumb and didn't enable the app. Come on.
I wonder if there's a way to use Tasker to bypass the swipe screen after touching the phone to NFC. I don't mind placing the phone on my implant and pressing the power button. Having to then swipe another screen requires weird hand acrobatics when using an implant, which is why I'm still on 4.4.4.
dimex said:
They're both ugly and not reliable, IMO. I couldn't even get Uber to work and sent the dev an email. He was a ****ing jerk and basically said I'm dumb and didn't enable the app. Come on.
I wonder if there's a way to use Tasker to bypass the swipe screen after touching the phone to NFC. I don't mind placing the phone on my implant and pressing the power button. Having to then swipe another screen requires weird hand acrobatics when using an implant, which is why I'm still on 4.4.4.
Click to expand...
Click to collapse
using the secure settings and locale plugins it is possible to make a profile that disables lock screen on a specific nfc tag read and then reanables lockscreen when the screen goes off
mbloomer04 said:
using the secure settings and locale plugins it is possible to make a profile that disables lock screen on a specific nfc tag read and then reanables lockscreen when the screen goes off
Click to expand...
Click to collapse
Any guide on this?
Neurom707 said:
Any guide on this?
Click to expand...
Click to collapse
dimex said:
I wonder if there's a way to use Tasker to bypass the swipe screen after touching the phone to NFC. .
Click to expand...
Click to collapse
-EDIT-
guide link removed due to error
mbloomer04 said:
yup, I just made one for you here Guide
sorry for the delay
Click to expand...
Click to collapse
Not going to work. NFC polling in stock Lollipop is Screen On, Unlocked. We need to enable alternate polling modes to even be able to read the NFC tag. Go ahead and try it, your phone won't even read your NFC tag, let alone disengage the keyguard. Even if you got rid of the keyguard, you still have the Pattern Unlock, or PIN, or password. You need Secure Settings plugin within Tasker to remove those.
The only ROM for the Nexus 5 at the moment with different NFC polling options is Cataclysm. I tried extracting the NfcNci.apk after I changed the settings, but the settings didn't stick around when I brought it to stock ROM. I'm guessing you have to go in and manually add the settings or change the polling code within the apk, but I don't know how to decompile and edit code.
If you know how to do that, that's all we need; a modified NfcNci.apk with Screen Off, Locked polling mode. It's located in system/app.
Your guide is useless as it stands, just being honest.
dimex said:
Not going to work. NFC polling in stock Lollipop is Screen On, Unlocked. We need to enable alternate polling modes to even be able to read the NFC tag. Go ahead and try it, your phone won't even read your NFC tag, let alone disengage the keyguard. Even if you got rid of the keyguard, you still have the Pattern Unlock, or PIN, or password. You need Secure Settings plugin within Tasker to remove those.
The only ROM for the Nexus 5 at the moment with different NFC polling options is Cataclysm. I tried extracting the NfcNci.apk after I changed the settings, but the settings didn't stick around when I brought it to stock ROM. I'm guessing you have to go in and manually add the settings or change the polling code within the apk, but I don't know how to decompile and edit code.
If you know how to do that, that's all we need; a modified NfcNci.apk with Screen Off, Locked polling mode. It's located in system/app.
Your guide is useless as it stands, just being honest.
Click to expand...
Click to collapse
Damned hubris! good call, tested and it worked fine on 4.4.4 :/ . hmmm will edit the guide to mention it wont work on Android 5
Thanks for the heads up and my apologies
"Even if you got rid of the keyguard, you still have the Pattern Unlock, or PIN, or password. You need Secure Settings plugin within Tasker to remove those."
Click to expand...
Click to collapse
The tasker profile above worked fine with a pattern set, scan the tag the lockscreen disapears till you turn off your screen, I tested it with secure settings and could see no benefit to also having it disable you password etc as the lack of keyguard meant you were never prompted for it
but aye a different polling method is needed
---------- Post added at 03:07 AM ---------- Previous post was at 02:59 AM ----------
dimex said:
Your guide is useless as it stands, just being honest.
Click to expand...
Click to collapse
Aye, have requested the thread be removed as it'll only work with nfc lockscreenoff... and that in itself removes the need for this
thanks for the heads up, rookie error on my part there
mbloomer04 said:
Aye, have requested the thread be removed as it'll only work with nfc lockscreenoff... and that in itself removes the need for this
thanks for the heads up, rookie error on my part there
Click to expand...
Click to collapse
All good. We just need someone who knows what's up to modify NfcNci.apk for us. I just started the semester and can't devote time to it right now.
dimex said:
All good. We just need someone who knows what's up to modify NfcNci.apk for us. I just started the semester and can't devote time to it right now.
Click to expand...
Click to collapse
Even if it has been a while, this might be useful:
http://forum.xda-developers.com/showpost.php?p=59780557&postcount=469
There is also a step-by-step guide on how to mod it yourself, a few pages later, and a guide for NFC with screen on but locked. I tried it on 5.1 (Xperia S, nAOSP), worked like a charm.
Hello everyone
I personally preferred Fingerprint lock but uts not always working nicely and I mean it requires to enter pin or pattern lock
I wonder if this is a known issue and can be solved or this is a feature to increase security?
Regards,
hearts king101 said:
Hello everyone
I personally preferred Fingerprint lock but uts not always working nicely and I mean it requires to enter pin or pattern lock
I wonder if this is a known issue and can be solved or this is a feature to increase security?
Regards,
Click to expand...
Click to collapse
You can turn that off in settings.
ghostofcain said:
You can turn that off in settings.
Click to expand...
Click to collapse
The problem that to set fingerprint you have to set another lock setting like pin or pattern
hearts king101 said:
The problem that to set fingerprint you have to set another lock setting like pin or pattern
Click to expand...
Click to collapse
Otherwise you and only you can access your device, but when setting the additional settings there is a box for require on device start, which can be deselected
ghostofcain said:
Otherwise you and only you can access your device, but when setting the additional settings there is a box for require on device start, which can be deselected
Click to expand...
Click to collapse
I did that too but still sometimes requires a pin or a pattern
Currently I have double tap to wake with Smart lock enabled. Unfortunately it takes me to lock screen and I have to swipe to go to home screen. Is there any Tasker plugin or any other way to go to home screen instead of lock screen on double tap? I have tried Tasker with my limited knowledge, but couldn't achieve it...
Update: Achieved with Tasker
Try AutoInput
rickysidhu_ said:
Try AutoInput
Click to expand...
Click to collapse
Can we not achieve that in Tasker without AutoInput?
ram4ufriends said:
Can we not achieve that in Tasker without AutoInput?
Click to expand...
Click to collapse
To be completely honest I'm not too sure since I don't use the feature myself. I did see it somewhere in that plugin though, which is why I recommended it.
rickysidhu_ said:
To be completely honest I'm not too sure since I don't use the feature myself. I did see it somewhere in that plugin though, which is why I recommended it.
Click to expand...
Click to collapse
Thanks, will try that
I have the same problem / need. I use smartlock based on android wear watch paired with my galaxy S9, which means I never have to enter my pin, but for some silly reason whenever I wake up the phone using tasker I still can't get past the slide to unlock.
My current workaround which meets my immediate needs (maybe not yours).... on my phone which I carry in a holster on my hip is to use fingerprint sensor to manually unlock while the phone is in the holster. I also have a tasker task to vibrate upon unlock (bypasses slide to unlock) which gives feedback when I'm successful. Surprisingly, fingerprint sensor doesn't care which way you rotate your finger on the sensor - it still recognizes it.
After I unlock the phone I initiate actions from my smartwatch - things like initiating google voice search in a way that preserves my preferred note to self behavior (goes to google keep including transcript and recording... doesn't work if you start google voice search by saying ok google)
electricpete1 said:
I have the same problem / need. I use smartlock based on android wear watch paired with my galaxy S9, which means I never have to enter my pin, but for some silly reason whenever I wake up the phone using tasker I still can't get past the slide to unlock.
My current workaround which meets my immediate needs (maybe not yours).... on my phone which I carry in a holster on my hip is to use fingerprint sensor to manually unlock while the phone is in the holster. I also have a tasker task to vibrate upon unlock (bypasses slide to unlock) which gives feedback when I'm successful. Surprisingly, fingerprint sensor doesn't care which way you rotate your finger on the sensor - it still recognizes it.
After I unlock the phone I initiate actions from my smartwatch - things like initiating google voice search in a way that preserves my preferred note to self behavior (goes to google keep including transcript and recording... doesn't work if you start google voice search by saying ok google)
Click to expand...
Click to collapse
I was able to achieve this with Tasker and AutoTools.. now my phone directly goes to home screen when connected to my watch or wifi
ram4ufriends said:
I was able to achieve this with Tasker and AutoTools.. now my phone directly goes to home screen when connected to my watch or wifi
Click to expand...
Click to collapse
Can you explain step by step please?
Just install AutoInput from playstore (it's not free), it has an option to unlock the screen automatically if you have FaceUnlock enabled.
Once I have provided the security credentials ie scanned fingerprint, or unlocked by face, is there any way for the phone to automatically open instead of requiring me to swipe?
thanks
bonerp said:
Once I have provided the security credentials ie scanned fingerprint, or unlocked by face, is there any way for the phone to automatically open instead of requiring me to swipe?
thanks
Click to expand...
Click to collapse
Just turn off stay on lockscreen in settings
and fingerprint should not stay on lockscreen...
vanshksingh said:
Just turn off stay on lockscreen in settings
and fingerprint should not stay on lockscreen...
Click to expand...
Click to collapse
hmm you must have a different version to me (One UI 3 is where I'm at) as not got that setting for fingerprint although have for face lock! Great consistency there....
yeah, i know i have an issue, so clarifications aside, y really really heate to touch the power button to lock the phone, so i tried the accesibility icon/menu to lock the phone without physical contact, but i really think unfortunatelly is a joke.
I sooo much miss the OP launcher feature to double tap home screen lo lock the phone.
i know is my thing, i know is me afraid of the button to break, and taking into consideration that i give intensive use to the phone, that was always a concern i had, which disappeared the five years y used OP.
Can some one please give me some comfort words about using the physical button or adice me a good app to easily lock the phone.
thanks to everyone in advance
Rooted, I use CleanSlate custom kernel's S2S (Sweep to Sleep) to lock the screen and turn it off. Works everywhere including the lock screen.
The kernel doesn't even require root for most of it's features, just need an unlocked bootloader and follow the directions to flash it.
I use Nova launcher and use the to double tap to lock feature.
roirraW edor ehT said:
Rooted, I use CleanSlate custom kernel's S2S (Sweep to Sleep) to lock the screen and turn it off. Works everywhere including the lock screen.
The kernel doesn't even require root for most of it's features, just need an unlocked bootloader and follow the directions to flash it.
Click to expand...
Click to collapse
thank you but not rooting the phone for now
2003vstrom said:
I use Nova launcher and use the to double tap to lock feature.
Click to expand...
Click to collapse
The only problems with that are: 1) that it only works on the home screen (and if you have a spot void of icons to double-tap in), and if I remember correctly (correct me if I'm wrong) 2) if you're not rooted, then its only choice is to use accessibility services to lock the screen and turn it off - but the caveat of that is that to unlock then requires your primary method to unlock (pin, etc) so the fingerprint reader won't be able to be used to unlock when you've locked with that option.
With root at least, if you have Nova's root option chosen to lock, it's then a normal lock so you can still use the fingerprint reader after to unlock.
catintheroof said:
thank you but not rooting the phone for now
Click to expand...
Click to collapse
Just remember that you don't necessarily need root for that. Only an unlocked bootloader so that you could flash it, although unlocking the bootloader, if you don't already have it unlocked, will factory reset your device. Just making sure you know your options.
I swear by Nova Launcher Prime, too - I just like to be able to lock from any app and screen that I'm on, plus I find it works more reliably in the kernel.
roirraW edor ehT said:
The only problems with that are: 1) that it only works on the home screen (and if you have a spot void of icons to double-tap in), and if I remember correctly (correct me if I'm wrong) 2) if you're not rooted, then its only choice is to use accessibility services to lock the screen and turn it off - but the caveat of that is that to unlock then requires your primary method to unlock (pin, etc) so the fingerprint reader won't be able to be used to unlock when you've locked with that option.
With root at least, if you have Nova's root option chosen to lock, it's then a normal lock so you can still use the fingerprint reader after to unlock.
Click to expand...
Click to collapse
been using the accesibility menu, and any unlock method works, actually.
im not 100% sure to install nov launcher though
roirraW edor ehT said:
Just remember that you don't necessarily need root for that. Only an unlocked bootloader so that you could flash it, although unlocking the bootloader, if you don't already have it unlocked, will factory reset your device. Just making sure you know your options.
I swear by Nova Launcher Prime, too - I just like to be able to lock from any app and screen that I'm on, plus I find it works more reliably in the kernel.
Click to expand...
Click to collapse
thanks for the clarification, much appreciated
I use the power button
I use the swipe up option on one of my folders on the home screen using Nova Launcher. Also have long press to lock screen on Vivid Nav Gesture app bottom left trigger which can be triggered on any screen.
wolfeyes30 said:
I use the power button
I use the swipe up option on one of my folders on the home screen using Nova Launcher. Also have long press to lock screen on Vivid Nav Gesture app bottom left trigger which can be triggered on any screen.
Click to expand...
Click to collapse
Vivid Nav app ? i'll look into it, do i need to be rooted ?
catintheroof said:
Vivid Nav app ? i'll look into it, do i need to be rooted ?
Click to expand...
Click to collapse
Oops...yes you do. Sorry about that, I missed that you aren't rooted.
Could also use Swiftly Switch app, I believe there is a free version. Its a side swipe bar basically with lots of options
I use just the accessibility option in Nova and on the home screen, I double tap and the screen shuts off and locks the phone, then I pick my phone up and lock screen wakes up and I use my thumb to unlock phone.
2003vstrom said:
I use just the accessibility option in Nova and on the home screen, I double tap and the screen shuts off and locks the phone, then I pick my phone up and lock screen wakes up and I use my thumb to unlock phone.
Click to expand...
Click to collapse
that one by now seems my most non-rooted feasible option.
i can see im not the only one who doesnt like to touche the power button
catintheroof said:
that one by now seems my most non-rooted feasible option.
i can see im not the only one who doesnt like to touche the power button
Click to expand...
Click to collapse
yeah works perfectly fine for with double tap to lock screen, pick up to wake or double tap and use my thumb print then unlock with my thumb.
2003vstrom said:
I use just the accessibility option in Nova and on the home screen, I double tap and the screen shuts off and locks the phone, then I pick my phone up and lock screen wakes up and I use my thumb to unlock phone.
Click to expand...
Click to collapse
This is the method I use on my unrooted Note 20 Ultra. With fingerprint and face unlock to unlock. No issues.
NVM
pcriz said:
This is the method I use on my unrooted Note 20 Ultra. With fingerprint and face unlock to unlock. No issues.
Click to expand...
Click to collapse
yeah I have used it forever, its the first thing I do when I get a new phone lol
catintheroof said:
i can see im not the only one who doesnt like to touche the power button
Click to expand...
Click to collapse
Yeah, old habit from the Samsung Galaxy S2 and their power button that was common to go bad (and did under warranty).
Cant you just set the screen timeout to 15 seconds and the phone to lock immediately after the screen goes off?
MrBelter said:
Cant you just set the screen timeout to 15 seconds and the phone to lock immediately after the screen goes off?
Click to expand...
Click to collapse
at least I consider that approach inefficient, I actually tried it