Develop Bugs

[Question] Can I flash a Stock International Rom on the E980?

Can I do it? Just download it from here http://lg-phone-firmware.com/index.php?id_mod=25 and flash it via LG FlashTool like I do with the AT&T One? Or will it screw something up?
After flashing if it would work I could just load up the AT&T Baseband for the modem.
I can flash international roms just fine in CWM with the AT&T baseband.
SO What happens if I try and flash say the E988 with LG FlashTool on my E980?

hyelton said:
Can I do it? Just download it from here http://lg-phone-firmware.com/index.php?id_mod=25 and flash it via LG FlashTool like I do with the AT&T One? Or will it screw something up?
After flashing if it would work I could just load up the AT&T Baseband for the modem.
I can flash international roms just fine in CWM with the AT&T baseband.
SO What happens if I try and flash say the E988 with LG FlashTool on my E980?
Click to expand...
Click to collapse
I would like to know as well....:thumbup:
Sent from my GT-N7000 using xda app-developers app

Right now Im slowly downloading using my limited AT&T Data to download 1.7GB I cant wait til tommrow to find out lol.
I`m downloading the Telcel Mexico One its the E980H its extremely close.
Two things I`m worried about..
1. It wont flash or work at all.
Or
2. I will loose my IMEI and have to call AT&T and have them replace the phone lol.

hyelton said:
Right now Im slowly downloading using my limited AT&T Data to download 1.7GB I cant wait til tommrow to find out lol.
I`m downloading the Telcel Mexico One its the E980H its extremely close.
Two things I`m worried about..
1. It wont flash or work at all.
Or
2. I will loose my IMEI and have to call AT&T and have them replace the phone lol.
Click to expand...
Click to collapse
Well good luck to you buddy....let me know how it goes.....:thumbup::thumbup::thumbup::thumbup::thumbup:
Sent from my GT-N7000 using xda app-developers app

Thanks Im about to backup my EFS, But Im about to flash it the download is done,

OMG!!!! IT WORKED!!!!!!!!!!!!!!!!!
After the flash finished phone booted said LG and had he TelCel Logo (Mexico Cell Carrier) EVERYTHING IS WORKING! Including Data, and Signal And service! I havent even flashed the baseband yet!.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Heres a Thread on this
http://forum.xda-developers.com/showthread.php?p=44984295#post44984295

Can not flash JB modem and Bootloader

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.mediafire.com/view/ioenxb5nfb2dk/Imagenes pakas#38s4kv125hn3fap
Previously had the intergalactic rom and 0 problems.
But now I can not flash any cr / modem.
Any idea why?

If you have an i747m, don't flash the mjb bootloader as you do not have the att s3. You could brick your phone.

audit13 said:
If you have an i747m, don't flash the mjb bootloader as you do not have the att s3. You could brick your phone.
Click to expand...
Click to collapse
But when I flash a CR my wi-fi and data is not working. (tested in 3 roms)
And afther the first boot my phone dies an never boots again.
I need to iuse ODIN to fix it.

Flashing the wrong bootloader can brick your phone and Odin will not fix a hard bricked phone. If the ROM won't boot, it may not be due to the bootloader. I have a 4.1.2 bootloader and every custom ROM I have tried will work.

Pegajoso said:
But when I flash a CR my wi-fi and data is not working. (tested in 3 roms)
And afther the first boot my phone dies an never boots again.
I need to iuse ODIN to fix it.
Click to expand...
Click to collapse
Looks like you have an hybrid firmware with the (stock) MUMUEMK3 Android 4.2 ROM and a MUMLI1 baseband/modem. The MUMUEMK3 is an official build of the 4.3. I'm not sure about the Mexican variant but I know that, with the US variant like AT&T, the stock 4.3 will not work with older modems and attempting to install an older modem always causes a baseband failure and consequent loss of all cellular functioning. I wouldn't be surprised if this is what you are experiencing and I would suggest you try to flash a 4.3 modem (MUMUEMK) instead. Or you may just look for a complete 4.3 stock image for your variant of the SGS3 and install this via custom recovery. I'd be surprised if this doesn't work.

Mmm actually I'm in the stock firmware.
But I can't find that modem (MUMUEMK)
http://forum.xda-developers.com/showthread.php?t=1831898
The problem here is If i flash a custom rom my phone only boot one time and then dies.
Even If I try to restore my backup (stock firmware) my phone never boot
Yeah I know is hard to belive (Tomorrow I record a video) but this is so confusing

Pegajoso said:
Mmm actually I'm in the stock firmware.
But I can't find that modem (MUMUEMK)
http://forum.xda-developers.com/showthread.php?t=1831898
The problem here is If i flash a custom rom my phone only boot one time and then dies.
Even If I try to restore my backup (stock firmware) my phone never boot
Yeah I know is hard to belive (Tomorrow I record a video) but this is so confusing
Click to expand...
Click to collapse
Looks like most of the emphasis is on the Canadian and US builds. Perhaps we sometimes overlook the Mexican and PR variants of the I747M. I believe, however, you may be able to find the stock image at Sammobile.com. I just checked there now and found this ...
http://www.sammobile.com/firmwares/3/?download=22509
I'll suggest you try to flash the complete stock image. With the 4.3 builds, Samsung appeared to have locked the modem tightly to the bootloader.

Simple question and looking for simple answer

Hi, I would like to ask you about something so confused about it ?
I have done my homework searching ? about a simple answer.
I have international note2 n7100 running carbon rom 4.4.4 and my question is " can i downgrade to 4.1.2 to be able to flash miui rom that based on Android 4.1.2 ?! And if that possible how can I do it?!
Thanx in advanced
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Xperia000sola said:
Hi, I would like to ask you about something so confused about it ?
I have done my homework searching ? about a simple answer.
I have international note2 n7100 running carbon rom 4.4.4 and my question is " can i downgrade to 4.1.2 to be able to flash miui rom that based on Android 4.1.2 ?! And if that possible how can I do it?!
Thanx in advanced
Click to expand...
Click to collapse
That depends. Are you on any bootloader that supports downgrade. If yes, then you can.

How should i know?

Apparently, if you ever updated your note II with stock rom 4.3 and up, then you'd end up with a locked bootloader. on the other side, from the looks of it, you are currently running a custom carbon kitkat rom, i dont see what prevents you from flashing miui 4.1.2. have you had any failed attempts or does miui requires you to be on android 4.1.2 before you install it. Unless I'm missing something, please elaborate why you think that you need to downgrade to 4.1.2 ?

bobfbaby said:
Apparently, if you ever updated your note II with stock rom 4.3 and up, then you'd end up with a locked bootloader. on the other side, from the looks of it, you are currently running a custom carbon kitkat rom, i dont see what prevents you from flashing miui 4.1.2. have you had any failed attempts or does miui requires you to be on android 4.1.2 before you install it. Unless I'm missing something, please elaborate why you think that you need to downgrade to 4.1.2 ?
Click to expand...
Click to collapse
when i download the miui V5 official rom and goes for flashing guide it tells me to download zip file called N7100_tools.zip and after downloading it and extract the file it contains this file N7100ZSALJ7_N7100OZSALJ7_N7100XXALJ2_TGY.TAR and seems to be 4.1.1 official firmware
that's why i want to downgrade to 4.1.2

full tutorial from miui site

[urgent help needed]. LG G3 bricked and stuck in download mode.

hi.
i have LG G3 d855 32 gb version. i was trying to upgrade it from kitkat but there wasnt any option in the settings, so i tried to do it by using flashtool method. now i downloaded the stock firmware by using my imei number which shows my device is for hongkong. so i downloaded the tot file as well as kdz file. when i tried to flash tot file i got an error after 6% and it said that "Partition Change Fa.. (failed maybe coz i cant read after that).. now the version installed on my device was "lgd855-v10m-ISR". i havent made any backup and phone is stuck in download mode. i'm completely lost now. any help would be appreciated.
Thanks in Advance

software info
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Belalsuleman said:
hi.
i have LG G3 d855 32 gb version. i was trying to upgrade it from kitkat but there wasnt any option in the settings, so i tried to do it by using flashtool method. now i downloaded the stock firmware by using my imei number which shows my device is for hongkong. so i downloaded the tot file as well as kdz file. when i tried to flash tot file i got an error after 6% and it said that "Partition Change Fa.. (failed maybe coz i cant read after that).. now the version installed on my device was "lgd855-v10m-ISR". i havent made any backup and phone is stuck in download mode. i'm completely lost now. any help would be appreciated.
Thanks in Advance
Click to expand...
Click to collapse

It doesn't matter what your phone's imei is, all you need is to download the correct kdz files for your phone model. Try looking for a kdz for D855 instead of the imei. All you need is to flash the correct file for your phone model. You will never go wrong.

LGUP Problem

I'm flashing v11d for mt lg g4 and this the error i get please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

here download and extract the *.dll file replace in lgup
100% work for me
https://www.youtube.com/watch?v=w4RSEholcuM
here my thread
https://forum.xda-developers.com/g4/help/downgrade-lg-g4-korean-variant-f500l-t3580803

Abandoned War Place said:
here download and extract the *.dll file replace in lgup
100% work for me
https://www.youtube.com/watch?v=w4RSEholcuM
here my thread
https://forum.xda-developers.com/g4/help/downgrade-lg-g4-korean-variant-f500l-t3580803
Click to expand...
Click to collapse
i will try it because i try to extract the kdz file to have dz and im stuck at 22% same step "boot"
now im stuck at 99% and 80% on lg up

bro you save me thanks a lot!

can i used this dll to downgrade?

yes you can downgrade without any problem bro
mine running on pre root system without any bloatware korean apps , dialpad..
*****dont forget to tick on refurbish on tot or kdz image to downgrade
[FIX KOREAN F500L] - How to
if you want to flash this please do a little research and becareful before you play with the firmware ...
Make sure to downgrade to 5.1 first before the procedure !!!
video (how to do it but not just do all what he doing just watch and you have a plan sight what to do)
https://www.youtube.com/watch?v=wSUwscS0JcY
thread (how to fix korean bloatware and get root)
https://forum.xda-developers.com/g4/development/rom-rootedpure-image-g4-korean-f500-t3321855

Abandoned War Place said:
yes you can downgrade without any problem bro
mine running on pre root system without any bloatware korean apps , dialpad..
*****dont forget to tick on refurbish on tot or kdz image to downgrade
[FIX KOREAN F500L] - How to
if you want to flash this please do a little research and becareful before you play with the firmware ...
Make sure to downgrade to 5.1 first before the procedure !!!
video (how to do it but not just do all what he doing just watch and you have a plan sight what to do)
https://www.youtube.com/watch?v=wSUwscS0JcY
thread (how to fix korean bloatware and get root)
https://forum.xda-developers.com/g4/development/rom-rootedpure-image-g4-korean-f500-t3321855
Click to expand...
Click to collapse
on the thread to de-bloated, is there any rom for marshmallow ?

no ,i don't know if you can modified the system and flash it directly

Abandoned War Place said:
no ,i don't know if you can modified the system and flash it directly
Click to expand...
Click to collapse
the thing is i cant modify the firmware hahahha