Related
G-Kernel
Welcome to G-kernel : the kernel meant to drive
Features :
Upstreamed Linux Kernel Source to 3.4.11
Compiled with googles 4.6.1 gcc toolchain
Sammy Kernel Spam halted
Faux Sound support
Frandom Support
Lion Heart gov
Intelliactive gov
Lagfree gov
Smartmax gov
Interactive gov as defualt in kernel
zRam Supported with kernel module with 400mb swap
Frandom supported with kernel module
Init.d Supported
GPU OC Upto 533mh
Full Exfat support
Experimental F2FS support
Cpu boost driver
Enabled KSM (kernel sampage mereging)
BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
Ondemmand plus gov
Whealthy gov
Smart Ass v2 gov
Ability to underclock
Cpu OC upto 2.1
Cpu Booster and Smooth scroll tweaks
O3 flags to speed up things
Fast Charge Support !
Read Ahead Tweaks
AND WAY MORE TO COME ...
Kernel Samepage Merging :
It lets the system share identical memory pages among different processes or virtual machines. This is done by scanning through the memory finding duplicate pages. The duplicate pair is then merged into a single page, and mapped into both original locations. The page is also marked as "copy-on-write", so the kernel will automatically separate them again should one process modify its data.
Click to expand...
Click to collapse
What is Frandom :
Frandom as quoted from rawintellect from this thread here
frandom will allow you to use crossbreeder to it's full potential. Reducing lag by orders of magnitude over the regular RNG (random number generator). please take a trip over to the crossbreeder thread here for more info.
Click to expand...
Click to collapse
Source Code
THE SOURCEE CAN BE FOUND OVER HERE
ISSUES :
This bad op
nothing in general
Downloads :
FROM V2 AND ONWARDS REFER TO MY G-DRIVE FOLDER WHICH CAN BE FOUND HERE
Mon , June 23rd v1
Tus , June 24th v2
Fri, July 4th v3
G-KERNEL CHANGELOG
Mon , June 23rd
--------------------
initial build
Tus , June 24th
--------------------
refer to my git for changelog beacuse alot to be listed here
Fri, July 4th
--------------------
Added KSM
Added experemintal f2fs support
Upstreamed source to 3.4.11
Gpu oced to 533mh
added smartmax gov
Added fastcharge
Rewrite of exfat
Credits :
Sonic-Developers
spegelius
1.ktoonsez
2.googyanas
3.Samsung
4.Google
5.Xda
6.All others who involved directly or indirectly to the development of this kernel
HOW TO OC YOUR DEVICE :
FIRST : I AM NOT RESPONISBLE TO ANYTHING THAT HAPPENES TO YOUR PHONE WITH THIS , I PROVIDE THESE INSTRUCTIONS AS IS SO IF YOU TRY THIS AND YOUR PHONE EXPLODES DONT COME CRYING
1. If you have cm rom with cm performance settigs do :
A. Open Settings > Performance
B. Choose Performance or Smartx as governor
C. If you have 444 cm there will be a slider , use that to oc
D. Use kernel tweaker to tweak other features of the kernel
d. profittttttttttttttttttttttttttttttttt !
1. If you have non cm rom without cm performance settings do :
A. Download Rom Toolbox lite from playstore
B. Go to performance tab
C. Open Cpu Control
D. Choose Performance or Smartx as governor
E. Use the slider to oc
F. Use kernel tweaker to tweak other features of the kernel
G. profittttttttttttttttttttttttttttttttt !
Going to give this a try Seems smooth
wow ... i am going to upload a version with oc uv uc , exfat , gpu oc , increased read ahead , and many more !!
New update is up !
Oh nice, gonna have to try his when i get time
Hello. How can I download the second version of kernel?
Sent from my GT-I9295 using XDA Premium 4 mobile app
6783 said:
Hello. How can I download the second version of kernel?
Sent from my GT-I9295 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
click the link ... click file from the bar that appears above the folder structure then hit download :angel:
mythi said:
click the link ... click file from the bar that appears above the folder structure then hit download :angel:
Click to expand...
Click to collapse
Thanks! It doesnt appear on mobile browsers. i had that problem, too...Now on my desktop PC i can download the kernel. Will flash it on my Vanish Rom and report back!
moviecut said:
Thanks! It doesnt appear on mobile browsers. i had that problem, too...Now on my desktop PC i can download the kernel. Will flash it on my Vanish Rom and report back!
Click to expand...
Click to collapse
what is vanish rom
Sorry, VanirAOSP!
moviecut said:
Sorry, VanirAOSP!
Click to expand...
Click to collapse
ohhhh lol ... did it boot nicely , hows your impressions so far
Both thumbs up! Latest vanir nightly + v2 kernel. Great so far!
Gesendet von meinem GT-I9295 mit Tapatalk
Seems that this wont go higher than normal maximum frequency.
ElakNovAlamak said:
Seems that this wont go higher than normal maximum frequency.
Click to expand...
Click to collapse
ya ... i noticed this strange behaviour ... does it make bench marks scores higher if you go up in frequencies i couldnt test beacuse i have bad experince with benchs
edit : try using kernel tweaker app to oc
mythi said:
ya ... i noticed this strange behaviour ... does it make bench marks scores higher if you go up in frequencies i couldnt test beacuse i have bad experince with benchs
edit : try using kernel tweaker app to oc
Click to expand...
Click to collapse
I tried both rom's own processor settings and Rom Toolbox Pro. Both show 2214 MHz as max, but tried almost every test and all I got is default 1890 MHz
Governors and schedulers work fine. Also uc works fine too.
ElakNovAlamak said:
I tried both rom's own processor settings and Rom Toolbox Pro. Both show 2214 MHz as max, but tried almost every test and all I got is default 1890 MHz
Governors and schedulers work fine. Also uc works fine too.
Click to expand...
Click to collapse
ya ... something strange ... all features work only oc i will look into this more
mythi said:
ya ... something strange ... all features work only oc i will look into this more
Click to expand...
Click to collapse
do you know where I can find the original kernels for the device?
not sure how the modem could be affected - but my signal is way lower than normal - no more 4G where is used to get it - also goes doen from H+ to H most of the time.
This kernel is what i use personally and i'm just sharing it for anyone who wants a stable kernel with good battery.
THE LIGHT WEIGHT KERNEL
DOWNLOADS :
LWK-i9500 Folder
[ Do Not Mirror! ]
Code :
GCM : For CM13
RR : Resurrection Remix
NOTE : WIPE APPDATA OF YOUR KERNEL APP BEFORE FLASHING !
USE GEAR/TWRP RECOVERY TO FLASH THE KERNEL.
Bugs/Workarounds :
* Rarely Random Reboots can occur.
Sources : Github
Latest
Credits :
* Andreilux (For many things)
* Voltaqe (always helpful)
* halaszk (LMK Optimisations)
* Alberto96 (f2fs support)
* MemAllocatoR (vibration control)
* jwchen (occasional compiling)
* arter97 ( lazyplug )
* and many others
CHANGLOG :
* Just check my github !
It looks promising , I hope to see more features coming for this kernel in future. Keep up the good work bro
Great job mate!??
Woow good to see our i9500 have new kernel.. Waiting for more features.. Hope you can make for kitkat too sir.. Lol
thank you so much and i hope this little project gets bigger and bigger good luck mate
Noriyuki_Fariz said:
Woow good to see our i9500 have new kernel.. Waiting for more features.. Hope you can make for kitkat too sir.. Lol
Click to expand...
Click to collapse
You have the PERFECT kernel for kit Kat a.k.a. Perseus ( is it not available ? Rom switcher uses it )
asad007 said:
PS:
=> This kernel DOES NOT support init.d ( yet )
=> I am still learning , Help is always welcome
Click to expand...
Click to collapse
As far as I try, I can't make init.d support for enforcing samsung official LP OA7 to work by editing its ramdisk.
Even using term-init.sh for universal init.d enabler on official rooted OA7 enforcing and prism barebone enforcing, will not work.
Have u tried to enabled it but fail?
I think, maybe becoz your kernel boot at enforcing state.
If you completely remove enforcing and set permissive or disable selinux only, its different story
I'm sorry for my bad english.
If I disable selinux , the kernel would not boot ( I tried doing that ) so I'll see what I can do about booting in the permissive mode itself
And then maybe the code for init .d in the ram disk may work :thumbup:
asad007 said:
You have the PERFECT kernel for kit Kat a.k.a. Perseus ( is it not available ? Rom switcher uses it )
If you want I can compile from Perseus kit Kat sources but that would not be my work ( Perseus is the best kernel so far )
Click to expand...
Click to collapse
Yeah i know it sir thanks to Andrei.. But 1 problem is with v19.1 alpha tethering not detected in other device.. I only hope it will fixed soon by Andrei or by other dev.. And Romswitcher v3.1 still need more features i think like zram so swap will work too..
OP updated with second release
changelog :
using LZO compression instead of XZ , kernel is heavier but execution is faster (eg; booting time is less) also this should fix the high battery drain
Kernel boots as permissive
PS:
1) The code in the init.rc does not get executed for init support ( ill work on it soon after my exam in a day or two )
2) Please test the battery life and performance on this one
Thank You
What are the two frequencies available?
The min and max
BTW I found that on some apps the frequency can't be set
For example in aero control you can't set frequency but you can use memory tweaks like ksm on it
On the other hand in no frills you can use only min and max frequency
While on cpu tuner you get three frequencies min , max and 600Mhz
It's your call mate what you want
asad007 said:
The min and max
BTW I found that on some apps the frequency can't be set
For example in aero control you can't set frequency but you can use memory tweaks like ksm on it
On the other hand in no frills you can use only min and max frequency
While on cpu tuner you get three frequencies min , max and 600Mhz
It's your call mate what you want
Click to expand...
Click to collapse
Battery backup seems to be promissing... but after 45min of usage when i clicked the app drawer it got rebooted. pls add LUCurative or smartassv2 governer and init.d support.
---------- Post added at 01:09 PM ---------- Previous post was at 12:48 PM ----------
itsme12345 said:
Battery backup seems to be promissing... but after 45min of usage when i clicked the app drawer it got rebooted. pls add LUCurative or smartassv2 governer and init.d support.
Click to expand...
Click to collapse
Also cpy spy dont show up the frequency usage it says kernel not supported. pls look that also.
---------- Post added at 01:30 PM ---------- Previous post was at 01:09 PM ----------
Second reboot...
^ That is because I removed debugging stuff to make the kernel lighter If I add it ,size would grow (let's see)
What would be cause of reboot...may be ram issue..
Have Stweak support?
THANK YOU SO MUCH <3 I have been dying and searching for a good KERNEL since the stock drains battery just when the screen is turn on for even 5 mins
THANK YOU SO MUCH MAN REALLY APPRECIATE IT
OP updated ,
Minor Update , Not much of a changelog present ( just minor changes here and there )
Second post updated with Touchscreeen sensitivity tweak ( this is a must , it makes the whole interface buttery smooth )
and some battery saving defaults ( cause at the end of the day , battery is all that matters)
Disclaimer: I am not responsible for your broken phone , broken memory card, etc. All my kernels I test first on my own phones , and then upload here
If you like my works please do not forget donate to me(PayPal account you may find in my profile)
Very often people not read full description(then write me to email "device not start, help me" even in the middle of the night) therefore write here with giant words:
UNLOCKED BOOTLOADER REQUIRED OTHERWISE DEVICE CAN'T START WITH CUSTOM KERNEL (YOU GET USB LOGO PICTURE OR TO YOU THROW INTO RECOVERY OR BOOTLOADER)
I never add fake overclock and overclock, because for now(or forever) no method for real overclock and underclock
Random reboots for most users probably fixed in 16.04.2016 and higher
For max stability I recommend to use Interactive governor
Kernel features:
1) USB Mass Storage Support
2)
3) DT2W support (to activate it, you should install Zenmotion)
4) KVM support (Kernel Virtual machine for Intel)
5) Added support of init.d. scripts
6) Added support of exFAT file system for external sd card.
7) ZRAM is disabled for old versions, on version of December 6 and higher- ENABLED.
8) Added CD emulating feature
9) Added SWAP support(need create swap partition on sdcard)
10)
12) Add more governors and I/O schedulers
13) USB-HID mouse & keyboard function(required USB Keyboard app from GPhttps://play.google.com/store/apps/details?id=remote.hid.keyboard.client&hl=en)
14) Support joysticks (DragonRise, Inc ang others)
15) Add more TCP IPv4 congestion algorithms (May change via TricksterMod or Kernel Auditor apps)
16) Reduce min display backlight for autobrightness. For use min backlight level you should to use autobrightness and set it to the left
Deprecated features:
1. Overclock to 2000 Mhz (for A501CG only) and Overclock to 2400 Mhz (for A500CG only). Idea and work by @TheSSJ (it have been removed since 26.12.2015)
2. Based on Asus Zenfone 2 ZE551ML 2.20.40.44(more than 50%) + Asus Zenfone 6 3.24.40 sources
3. Underclock to 667 Mhz. Idea and work by @TheSSJ
4.Hotplug for all governors
5. Frandom Linux kernel generator
Note: This kernel will work on stock Lollipop firmware only like 3.24.40.87, 3.24.40.78 or 3.23.40.60 or 3.23.40.52
This kernel was created by BORETS24 So if you need more information you can pm to him.
How to flash this kernel:Method 1(via PC)Step 0:
Bootloader unlock is required for every custom rom. You can use this tool for unlock:
https://drive.google.com/file/d/0B-Fin8UxrD6PRU9MM1lQZkV0SG8/view
Step 1:
You should download files for flashing:
ADB v1.0.32: Download from Google Drive
Step2:
You should reboot your phone in the droidboot mode. (turn off you gadget then press Turn off button and volume + button)
Then go to the ADB folder and hold Shift + Right Mouse button and write this command:
Code:
fastboot flash boot new_bootXX.XX.img
,where XX.XX- numbers after words "new_boot"
Step3:
Reboot to Android.
Method 2(through CWM/TWRP, without PC)1. Download Flashable ZIP archive on phone
2. Go to recovery mode
3. Click Install ZIP and choose this archive
4. Then reboot
Archieves You make take from this post http://forum.xda-developers.com/showpost.php?p=64640638&postcount=364(Thanks to @Don No 1)
How to install Zenmotion:(it needed for DT2W)1) Download this file (asus.hardware.touchgesture.double_tap.xml) :
https://drive.google.com/file/d/0B-Fin8UxrD6PWWRBT1gwak16Tnc/view?usp=sharing
2) Put this file into system/etc/permissions
Set file permissions. It is a 0644 rw- r-- r--
3) Reboot the phone
4) Find Zenmotion in the Settings and activate it.
(It will work if you flash this kernel)
Changelog:
25.10.2016
I not remember that I removed, let's start that I changed and added
USB Mass Storage mode
Removed few unstable governors
I started to compile with use Zenfone 2 source code for Marshmallow
Existed governors from 6.0.1 source
Removed lz4- caused bugs, drain battery, very slow interface
Added bootboost feature into ramdisk such as Zenfone 2
Now drain battery less and interface speed is high
12.06.2016
Reduce min display backlight brightness to 5(no need to set to 2, no difference between 5 and 2- I checked).For use min backlight level you should to use autobrightness and set it to the left
ZRAM now turn on automatically only for 1 Gb RAM devices, for 2 Gb it disabled by default
Return to "1 core per modules" CPU mode
Return Interactive Pro and Intel governors
Remove InteractiveX and Hotplug governors(sometime caused problems)
Replace WI-FI from module into kernel
03.06.2016
Full NTFS support for SD card
NTFS OTG full support by sibling Asus File Manager(read/write), from others file managers you can to see OTG NTFS devices, may see OTG NTFS devices from file chooser but you can't edit data. But you can edit platform.xml via NextAPP SDfix and can write on NTFS OTG devices with any apps
14.05.2016
Full ExFAT SDcard support such as stock kernel(Now you can see ExFAT sdcard in file chooser, can modified data even without Next APP SDfix)
Remove UKSM and disable KSM
16.04.2016
Fixed: restore signal after long dissapear
Fixed: random reboots in phone calls
Standart processor mode "2 cpus per module"
Remove Intel, Lagfree governors and FIFO scheduler(caused reboots)
Compile with standart GCC 4.9, remove -O3 optimization(unuseless, placebo effect)
Add idle from Linux 4.6
17.03.2016
LZ4 kernel compress
LZ4 zram compress/decompress
Remove Hotplug(caused reboots, overheats) driver and return Hotplug governor
Speed-up interface
More less battery drain
Compile with SaberMod 4.9.3
Others optimizations
05.03.2016
Added again hotplug driver but modified, cores not jumping, not dancing, strongly CPU0+CPU1 always online
Approximately 90% sibling source 3.24.40
Hybrid ramdisk from 87+60 firmware
Some changes in dt2w code
Fixed CD emulation
14.02.2016
Based on Asus Zenfone 2 ZE551ML 2.20.40(more than 50%) + Asus Zenfone 6 3.24.40 sources, remove hotplug driver, return Hotplug governor
06.02.2016
Hotpluging for all governors via MSM hotplug driver(I set 2 cores always online by default, you may tuning this driver via Kernel Auditor, point CPU Hotplug), possible fix the impossibility of restoring the network signal after a long stay outside the network, remove Hotplug governor(is no longer needed)
31.01.2016
Add Hotplug governor and set it by default, without load on CPU 1,2 or 3 cores will go to offline https://www.youtube.com/watch?v=WBbCBahSgrM&feature=youtu.be
30.01.2016
Remove hotplugging from Interactive governor again, add InteractiveX V2 governor with adaptation for Quad core devices( 1 phisical core= 2 threads CPU go to offline, when screen off)
27.01.2016
Interactive governor from Asus ZenPad S 8.0 with adding hotplugging(2 threads=1 core go to offline, when screen off), underclock to 533 MHz, many code and drivers from source Asus Zenfone 2 ZE500CL, Ofast optimization
19.01.2016
Add and turn on Ultra kernel samepage merging(UKSM) technology a place of KSM, underclock to 450 MHz, may be fixed all random reboots besides during long phone calls, when dt2w is on(or fix? I don't know)
16.01.2016
Use new source code 3.24.40
Tweak Interactive governor: hispeed_freq and touchboost_freq down to 1333 Mhz
09.01.2016
May be, fix all random reboots
04.01.2016
Fixed freezes and reboots on third-party governors, when connection speed faster than 20 Mbit/s, return hotplugging to Interactive governor, return Intel and Yankactive governors, some bug fixes
02.01/2016
Compile without Ofast optimization, removed Hotplugging from Interactive governor, removed Yankactive governor, may be, this actions fix random reboots.
31.12.2015
Compile without Ofast optimization, processor works now in '1 core per modules' mode, now disable 3 core(3 threads), when screen off, on Interactive governors, try at random fix reboots on all version of devices
28.12.2015
Try to fix reboots on 1 Gb RAM modifications(return stock process drivers)
28.12.2015
a)Change toolchan from stock GCC to SaberMod 4.8.5
b) Add Hotpluging to Interactive governor, when screen off
c) Add F2FS support
d) Fix some warnings during compilations
25.12.2015
Attempt to fix screen freeze or reboots during long phone calls: change process.c driver on modifity driver from Zenfone 2. Read about it here https://github.com/kirananto/ZENFONE2/commit/044ad3da5263ba256a59b517e96a272b4e3f19f6, Fix almost all warnings in proximiry/lightsensor driver "ISO C90 forbids mixed declarations and code" during compiling, remove "fake" overclock
23.12.2015
Fix freeze and reboots of device, when chaging governors and/or schedulers, add more TCP IPv4 congestion algorithms and set Westwood by defauls in place of stock Cubic
Add some joysticks support, now may use device as keyboard and mouse for PC, move KVM from kernel to modules
15.12.2015
Underclock to 316 MHz, add Adaptive, Yankactive(with Hotplugging implementation by @TheSSJ] ) and conservativeX governors
12.12.2015
Add if.bin into kernel, to attempt fix screen freezing, push also if.bin to system/etc/firmware and reboot phone.
if.bin
11.12.2015
1. Add frandom Linux kernel generator
2. Add Bioshock, Lagfree, lionheart, Wheatley governors
3. Add BFQ, SIO, SIOplus, FIFO, FIOPS, VR I/O schedulers
06.12.15
Add ZRam support
10.11.15
1. Add SWAP support
2. Kernel build with Ofast optimization.
Now I will upload new versions on Yandex Disk
https://yadi.sk/d/tBN8eYlVr3mVZ
XDA:DevDB Information
Custom Lollipop kernel for Zenfone 5 & Zenfone 6 by BORETS24(Intel only), Kernel for all devices (see above for details)
Contributors
tank0412, BORETS24
Source Code: https://github.com/BORETS24/Kernel-fo-Zenfone-6-by-BORETS24
Kernel Special Features:
Version Information
Status: Stable
Current Beta Version: 1.0
Created 2015-11-02
Last Updated 2016-10-25
Bugs:
Some users reported that they have random reboots or screen freezes after call.
This issue have not solved yet.
Btw @tank0412 did u tried contacting borets if he can update this kernel for rr rom [emoji14]
Sent from my ASUS_T00J using Tapatalk
no_name said:
Btw @tank0412 did u tried contacting borets if he can update this kernel for rr rom [emoji14]
Click to expand...
Click to collapse
Yeah. I drop him a line on 4PDA. It looks like he stoped developing because he do not have device and he can not fix freezes after call + random reboots.
Actually in his kernel there's no freeze btw I think if he can release source then someone may work on it to make it compatible with rr rom ?
Sent from my ASUS_T00J using Tapatalk
no_name said:
Actually in his kernel there's no freeze btw I think if he can release source then someone may work on it to make it compatible with rr rom
Sent from my ASUS_T00J using Tapatalk
Click to expand...
Click to collapse
But he did this yesterday
https://github.com/BORETS24/Kernel-fo-Zenfone-6-by-BORETS24
Wow great ?
Sent from my ASUS_T00J using Tapatalk
What apps can i use to underclock overclock this kernel?
geepee410 said:
What apps can i use to underclock overclock this kernel?
Click to expand...
Click to collapse
Kernel auditor.
But this kernel has a default underclock/overclock. (400mhz/2000Mhz)
tank0412 said:
Bugs:
Some users reported that they have random reboots or screen freezes after call.
This issue have not solved yet.
Click to expand...
Click to collapse
Hi mate I am using this custom kernel and dt2w and its in ON state for three days now and I can confirm I don't have any freezes or reboots.... I had flashed internal data, system and cache before installing, and also had first installed. 44. Version KitKat..... During installing KitKat I relocked boot loader and flashed stock recovery. Then I installed. 54 version then lollipop. 60 and finally. 78 lollipop.. After this i unlocked bootloader and flashed twrp... Then flashed custom kernel and zen motion, no lags [emoji2]. Only my phone wakes everytime when I am on 2G data enabled and WiFi off..
Sent from my ASUS_T00F using Tapatalk
tank0412 said:
But he did this yesterday
https://github.com/BORETS24/Kernel-fo-Zenfone-6-by-BORETS24
Click to expand...
Click to collapse
U should share this to Quanqanh
kunalshah912 said:
Hi mate I am using this custom kernel and dt2w and its in ON state for three days now and I can confirm I don't have any freezes or reboots.... I had flashed internal data, system and cache before installing, and also had first installed. 44. Version KitKat..... During installing KitKat I relocked boot loader and flashed stock recovery. Then I installed. 54 version then lollipop. 60 and finally. 78 lollipop.. After this i unlocked bootloader and flashed twrp... Then flashed custom kernel and zen motion, no lags [emoji2]. Only my phone wakes everytime when I am on 2G data enabled and WiFi off..
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
Hello there heheh i can see rr members here hahah
Yerp i am using it for 2 days, everything ok. Only screen freeze when temp high up to 42 degree.
Might be bootloader unlock. Later will try relock back and see wat will happen
Sent from my ASUS_T00J using XDA Forums
mshazrul82 said:
Hello there heheh i can see rr members here hahah
Yerp i am using it for 2 days, everything ok. Only screen freeze when temp high up to 42 degree.
Might be bootloader unlock. Later will try relock back and see wat will happen
Sent from my ASUS_T00J using XDA Forums
Click to expand...
Click to collapse
For relocking you need to install stock recovery
Sent from my ASUS_T00F using Tapatalk
@quanganh2627 if you interested in sources of borets kernel then you can see sources are released by him and one thing to tell you that in his kernel "no freeze after call" or any such type of bug,his kernel is supper smooth so maybe you can do something to make it work on our rr rom ?
Sent from my ASUS_T00J using Tapatalk
hey @tank0412 what new on update 2/11 ,sir ?
ChungVan said:
hey @tank0412 what new on update 2/11 ,sir ?
Click to expand...
Click to collapse
Nothing. i just created own topic for it on XDA.
Is this the same kernel that you post in the rr thread? @tank0412
myrul said:
Is this the same kernel that you post in the rr thread? @tank0412
Click to expand...
Click to collapse
Yeah, it is a same.
kunalshah912 said:
For relocking you need to install stock recovery
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
R u using stock .78 with dt2w kernel, if yes then what type of settings r u using as my battery is draining very fast and r u also using power saver? Please reply.
Thanks
tank0412 said:
Bugs:
Some users reported that they have random reboots or screen freezes after call.
This issue have not solved yet.
Click to expand...
Click to collapse
with this kernel , no random reboots or screen freezes after call.
i think it have only one problem was limited 3 minutes when call . after 3 minutes , the call will auto end
I want to create a thread about settings for every custom kernels on our S3 NEO with Lollipop Stock and CM11, CM12, stock 4.4.2 and 4.4.4 ROM.
If You are advanced or expert in the subject of krenels, parameters and features put to this thread Your settings.
This thread, I thnik, helps novice in search for the best settings to be the rom fast, stable and smooth.
So, please placing here and debate on settings the kernels.
Maybe for a CM11, CM12, CM12.1, CM13, stock 4.4.2 and 4.4.4 also 5.0.1 this settings works well, too.
Try and tell us
The Poll is only for stock TW 5.1.1 ROMs.
Thanks for Devs who made the kernels for S3 NEO:
- @sev3n1985
- @Renix63
- @LGaljo
- @nikita36078
- @oranaise2412
- if I forgot about someone - tell me.
Thanks to @gsstudios for giude about governors and I/O shedulers.
Thanks to Mike Barrett for video about Kernel Adiutor settings.
DELETED
Important - only for custom kernels
The phone must be rooted.
1. Before flash any new kernel do backup your rom, boot, recovery, preload and data ex. via recovery.
2. After flash the new kernel always do wipe cache and dalvik cache in recovery and next restart the phone. (restarts takes about 5min)
3. CPU frequencis and governours are important things in rom's speed.
4. CPU freq at 1593MHz may destabilized your phone - heating problem and sometimes random reboots.
5. If You want to OC CPU - have to turn off MPDecision Hotplug and select another one or nothing (MPD may do CPU freq not stable - is always good for only stock frequencis so from (192) 300 to 1401MHz).
6. Sometimes the new kernels have to root again via flash superSU update via recovery ex. like eMotion kernel.
7. Try any changes - don't be afraid - kernel not bite If so go wrong - always have backup
Good luck.
If anyone have another advices - feel free....
The difference between kernels with zRam and zSwap options:
- zRam is a kernel with virtual memory in Internal Memory your phone (compressed) for most users
- zSwap is a kernel for the SD card with swap partition for our phone ex. 512 or 1024 Mb, so if You have not swap partition in Your SD card - do not flash this kernel (no good resoults).
Heating and random reboots problem
This dependent of frequensic CPU and if is it so CPU max freq probably is set at 1593MHz.
If we to much OC our CPU's then our phones may have some lags and freezes or reboots (after call or in camera app).
So if you have this symptoms then you have to set CPU OC max to 1401MHz or 1497MHz.
If it no helps so maybe the kernel is wrong compiled with bad linux settings - and only change the kernel for another one.
Guide for CPU governors and I/O shedulers and others settings in Kernel Adiutor
Please read THIS - big thanks to @gsstudios for this gov guide.
Please watch THIS - thx to Mike Barrett for video about settings in Kernel Adiutor.
It's a good guides for everyone.
Only my conclusions
From my experience with OC CPU and use different kernels (in stock and CM series ROMs) the stable max freq CPU is at 1497MHz.
If You want better battery life select max CPU at 1401MHz or even 1300MHz - 1190MHz.
For better battery life You can try :
- Multicore Power Saving - ON
- CPU gov at Ondemand, Intelidemand, arteractive, inteliactive (without frequent lags)
- GPU gov set at conservative (in new Renix kernel) or msm-adreno-tz
- if you only listen to music then set Max Cores Screen Off at 1 CPU and max freq at 600 - 700 MHz - for media player is enaugh.
- Power Suspend Mode at LCD Panel or Hybrid.
My steps for install all things like rom, fixes, xposed, kernels, ect. :
1. Wipe system, data, cache and dalvik cache - no restart the phone
2. Flash any ROM - no restart the phone
3. Wipe cache and dalvik cache then restart the phone
4. Flash possibly another kernel ex. Renix's, eMotion's... I do it in this step 'couse sometimes after that We have to install ex. camera fix - again in Renix kernel or superSU in eMotion kernel
5. Flash any fix for the point ROM (like RIL, key fix, mixer fix, camera fix... others) then restart the phone
6. Flash superSU (if the rom has not rooted) and possibly busybox for advanced (change build.prop in Kernel Adiutor for example) then restart the phone next go into superSU ( the app install binary) next do settings and out - the same with busybox (have to install libs)
7. Install the xposed app next go to the recovery and flash xposed sdk22(Lollipop) (23 for MM) ex. v85 by wanam, next wipe cache and dalvik cache and restart the phone
8. That's all - in my phone works good, I did and do it by 2-3 years and no problem.
Remember - after wipe cache and dalvik cache the phone's booting time will take a 5-7min.
Thanks for this thread! ^-^
I think I'll post my stats too! I got a perfect balanced mix with 3.5 renix. But for now I wanted to try the new one with boeffla kernel sources ^-^
DELETED
DELETED
Nalas Thank you for the effort..Random restart problem issue ?.. Sory my english is poor
DELETED
nalas said:
Hello.
If you set CPU at 1497MHz or lower so no random reboots in I9301I.
I don't know how it look in I9300I.
So if someone can write abaut it so will be nice....
Click to expand...
Click to collapse
My device I9301Q..I try report the results
do you use xposed,grenify,powernap ?
DELETED
Make the explanations about kernel adiutor options plz. Ty
DELETED
Nalas no random reboots no lags and very very smoth my device thank you bro .
DELETED
DELETED
nalas said:
I'm happy to helped You bro.
What configaration You have ? at 1497MHz (pics) or 1305MHz (video) ? and what's kernel ?
It will be clarity for others.
If You can - edit Your post about above.. ? thx man.
Nice if it works in another phone
Greets
Click to expand...
Click to collapse
Device : I9301Q
Rom : Motion Rom 17.0
Kernel : Renix 3.7 zram
App : Kernel Adiutor Mod v9
Governor : Smartmax Maks 1305 Mhz,Multi core power saver disable wake up boost and hotplug boost disable
Hotplug : Msm hotplug not use Lazy hotplug
Gpu : Conservative and disable simple gpu,Adreno idler
Battery : Fast usb charge enable
I/o : İnternal fiops and 256 kb..External tripndroid 2048 kb
Ksm : Enable
Virtual Memory : Enable, Zram 100 mb
İnit d : Enable 99zram
Not use greenify,powernap..Damaging the system..Continuously restarts system
I have a I9301I and use Motion ROM 17.0 with eMotion kernel. Motion ROM 'as is' gave me frequent random reboots, so I tried Renix63 kernel. V2.0 fixed the random reboots, but LED lights stopped working. Later versions fixed this but introduced the problem of the phone freezing when responding to notifications and occasionally switched off the phone completely. I then tried eMotion ROM from sev3n1985. LEDs work, no random reboots, no freezes, no switch offs. It just works. nalas's second post in this thread has 20 screenshots of recommended tweaks to the Renix63 kernel. I prefer something that works out of the box.
nalas said:
4. CPU freq at 1593MHz may desabilized your phone - heating problem and sometimes random reboots.
5. If You want to OC CPU - have to turn off MPDecision Hotplug and select another one or nothing (MPD may do CPU freq not stable - is always good for only stock frequencis so from 300 to 1401MHz).
Heating and random reboots problem
This dependent of frequensic CPU and if is it so CPU max freq probably is set at 1593MHz.
If we to much OC our CPU's then our phones may have some lags and freezes or reboots (after call or in camera app).
So if you have this symptoms then you have to set CPU OC max to 1401MHz or 1497MHz.
From my experience with OC CPU and use different kernels (in stock and CM series ROMs) the stable max freq CPU is at 1497MHz.
If You want better battery life select max CPU at 1401MHz or even 1300MHz - 1344MHz.
Click to expand...
Click to collapse
With all due respect to nalas and Renix63 I don't understand the logic of producing a kernel that's overclocked to 1593MHz which then has to be reduced to 1401/1497 via Kernel Adiutor in order to prevent freezes or reboots.
Other users have had different experiences, so there there may be other factors to consider - variances in hardware, apps etc. - this is just my experience.
Apart from that - huge props to the devs here. If it were not for them I'd still be running TW 4.4.2.
Corbynista
DELETED
DELETED
I tested Ciro's rom but It was buggy for me (dialer does not appear but the phone call was running)
WiFi not working
SIM not working
I will try Motion Rom.
Cheers
Im new to lg g3 first im on lineage and looking for good kernel and some settings between battery-performance (with more balance to battery) what do you recomand guys? (Need and settings some screen shots will be beautifull) ohh lg g3 d855
I recommend you gamma kernel (v50) with the MM/N AOSP rom of your choice. use kernel adiutor for settings.
xfim said:
I recommend you gamma kernel (v50) with the MM/N AOSP rom of your choice. use kernel adiutor for settings.
Click to expand...
Click to collapse
Tnx but what settings its the best ? I found something here but its old topic ..?
gigel87 said:
Tnx but what settings its the best ? I found something here but its old topic ..?
Click to expand...
Click to collapse
It depends on what you want. If you havent done the thermal mod, limit cpu to 2ghz max, or even less. Try undervolting it also, see how low you can go before it crashes. Also using noop as scheduler might (in rare cases, such as benchmarks) give noticeably better performance (2800 with bfq and 3250 with noop on antutu io score)
Tnx again i will test more
After some play with some roms , yes i love lineage its smooth but camera ...... this is with stock kernel , now im just flashing between Fulmics (great battery , i have some lag /heating in my games) , and Clean rom (im in love use with extra debloat its what i need but lags /heating). all rom used stock or with other kernels , still i try to configure a kernel like a pro for heating issue and lag but failed , now on lineage the heat its not there (or its very low) and the lag its 0 , still waiting for someone to give me some tips for setting kernel on fulmics or better clean rom , if lineage kernel it can do this why rest no ?