Just found another update. More proof that T-Mobile hasn't killed the Note 3 yet.
https://support.t-mobile.com/docs/DOC-27648
AndroidHacker99 said:
Just found another update. More proof that T-Mobile hasn't killed the Note 3 yet.
https://support.t-mobile.com/docs/DOC-27648
Click to expand...
Click to collapse
Got it last month, but thanks for the heads up in case others have not.
does anyone have this to flash with ODIN? I just need to flash this to get the newer baseband radio from it.
---------- Post added at 04:36 PM ---------- Previous post was at 04:17 PM ----------
Okay found all of the stuff OIDN and drivers and the rom along with TWRP 2.8.7.0 to flash with ODIN after the firmware it flashed so that you can go back to a know good working recovery once your done with the baseband update. I'll post a link to my google drive once I have all of that in place. Now what I'd like to know is if you would like it all in part ie. rom zip then the odin zip and the recovery zip and the drivers zip or would you like it in one big zip file? Let me know. That way I can get up to the drive that most of the users want it in. Thanks and glade we still have devs that work on this old but still kick a$$ phone.
michaelcrossland said:
does anyone have this to flash with ODIN? I just need to flash this to get the newer baseband radio from it.
---------- Post added at 04:36 PM ---------- Previous post was at 04:17 PM ----------
Okay found all of the stuff OIDN and drivers and the rom along with TWRP 2.8.7.0 to flash with ODIN after the firmware it flashed so that you can go back to a know good working recovery once your done with the baseband update. I'll post a link to my google drive once I have all of that in place. Now what I'd like to know is if you would like it all in part ie. rom zip then the odin zip and the recovery zip and the drivers zip or would you like it in one big zip file? Let me know. That way I can get up to the drive that most of the users want it in. Thanks and glade we still have devs that work on this old but still kick a$$ phone.
Click to expand...
Click to collapse
I apologize for the late reply, but here's a download link from SamFirmware.com (a mirror which doesn't throttle downloads to less than 56k dialup speeds).
Link: http://fws02.updato.com/GALAXYNOTE3/SM-N900T/TMB/SM-N900T_1_20170427093713_i57typiagh.zip
bobbyphoenix said:
Got it last month, but thanks for the heads up in case others have not.
Click to expand...
Click to collapse
No problem, I posted this as a PSA if you will to notify anyone who didn't know about this update.
Tnkx for the upload , now I have a question , it's there a way to have Xposed working on these last stock lollipop update ?
Sent from my SM-N900T using XDA-Developers Legacy app
Take sim card out while flashing.
I tried to flash mine through ota update. Somehow damaged my sim.
I realised a day later that i could not send an sms message. Recieve ok send no. Everything else was fine. Lucky i had my girl's sim to test it.
Had to get a new one at the store. They tried to charge me. Ha!
Better safe than sorry.
S.V.I said:
Take sim card out while flashing.
I tried to flash mine through ota update. Somehow damaged my sim.
I realised a day later that i could not send an sms message. Recieve ok send no. Everything else was fine. Lucky i had my girl's sim to test it.
Had to get a new one at the store. They tried to charge me. Ha!
Better safe than sorry.
Click to expand...
Click to collapse
I accepted this update via OTA and had no such problems, I suspect your problems may have been caused by a failed update.
AndroidHacker99 said:
I accepted this update via OTA and had no such problems, I suspect your problems may have been caused by a failed update.
Click to expand...
Click to collapse
Yes. it was. The file I downloaded from here (QD2 Update) would not complete flashing. So I ODINed the PL1 firmware and tried to flash again. did not work. blahdiblah.
Eventually I went through the OTA update from PL1. the phone rebooted telling me to insert sim. I managed to restart the phone and get the sim recognized, but the sim was damaged somehow with it not being able to send text messages.
Went to the store. they at first tried to charge me for a new sim.... but then the guy remembered that I had previously called his manager complaining that he was too good of a salesman.... then he told me straight: "we've had a bunch of complaints about that problem" (OTA updates breaking SIM cards)
So, Just to be on the safe side, I take the sim out from now on.
Alright.
S.V.I said:
Yes. it was. The file I downloaded from here (QD2 Update) would not complete flashing. So I ODINed the PL1 firmware and tried to flash again. did not work. blahdiblah.
Eventually I went through the OTA update from PL1. the phone rebooted telling me to insert sim. I managed to restart the phone and get the sim recognized, but the sim was damaged somehow with it not being able to send text messages.
Went to the store. they at first tried to charge me for a new sim.... but then the guy remembered that I had previously called his manager complaining that he was too good of a salesman.... then he told me straight: "we've had a bunch of complaints about that problem" (OTA updates breaking SIM cards)
So, Just to be on the safe side, I take the sim out from now on.
Click to expand...
Click to collapse
Okay.
Network Problem
hey. Guys i have a sm-n900t but my sim card wont read. There is a round circle with a line in it and when i try to call some it say "mobile network not available" please help me guys...
I suspect you may have an out of date modem that's not compatible with the latest Lollipop update. My initial questions to you are did you install this update via OTA or using ODIN and what OS did you have prior to installing this update? If your currently installed modem is indeed out of date, the first troubleshooting step would be to re-flash the N900TUVUFQD2 firmware using ODIN.
If I'm on this baseband version, can i flash the Dompop rom: https://forum.xda-developers.com/no...rom-dompop-urv1-tekhd-edition-note-4-t3060175
Or do i need to change baseband version??
Also, to root my note 3 should i follow this guide or something else? https://forum.xda-developers.com/showthread.php?t=2672393
modem bootloader
AndroidHacker99 said:
I apologize for the late reply, but here's a download link from SamFirmware.com (a mirror which doesn't throttle downloads to less than 56k dialup speeds).
Link: http://fws02.updato.com/GALAXYNOTE3/SM-N900T/TMB/SM-N900T_1_20170427093713_i57typiagh.zip
Click to expand...
Click to collapse
here, i just posted this: https://forum.xda-developers.com/no...updated-bl-cp-t-mobile-galaxy-note-3-t3651839
ODIN should update the modem partition when you flash the latest firmware, I'm not sure why yours didn't update unless you somehow flashed it incorrectly. I'll record a video on how to do if you'd like.
I have the SM-N900TUVUFQD2 from T Mobile, but not on a major network.
Would like to update to Marshmallow, can someone please post the steps on how to do this or a link if someone has the Marshmallow update file, please.
The link in AndroidHacker99 post is 5.0 Lollipop
Update; I am running Phronesis N5 6.0.1 v3.0 and it is running very well with no problems.
I am on the latest lineageOS 20170822, my phone shows a baseband of N900TUVSFPH3, how can I update to latest modem firmware?
frank3427 said:
I am on the latest lineageOS 20170822, my phone shows a baseband of N900TUVSFPH3, how can I update to latest modem firmware?
Click to expand...
Click to collapse
Here is the link to the newest baseband
https://www.androidfilehost.com/?fid=673368273298969970
Alright, sounds like there needs to be some clarification here.
#1. I installed the update via ODIN, and IF you flashed the update via ODIN as well, your baseband WILL update (assuming something didn't go wrong, in which case I recommend a re-flash to ensure the process completed successfully).
#2. I never intended this to become an error reporting thread, I was simply posting a notification for those who didn't know about this update. You should go post about this in the Troubleshooting section of this Note 3 (TMO) subsection.
#3. If you want to complain to me saying "This update broke my phone!!"... It's not my software, therefore it's not my problem. All modifications (this includes firmware flashes) are YOUR responsibility and YOU perform it at YOUR OWN RISK.
Go look around on XDA, everyone says "PERFORM AT YOUR OWN RISK".
Hope this cleared most of it up, if not... go re-read it because you probably didn't ACTUALLY read it.
Related
Hi,
This is for a Canadian T889V (note 2) from Wind Mobile.
A few weeks ago I tried to use the online form to get an unlock code from Wind (they let you have the code after 6 months for $10), and the code didn't work, I called their customer support multiple times, and all I got was, try the same code again (tried it rooted/unrooted/completely stock, etc, etc...), and I'm down to the last unlock attempt.
They also suggested I call Samsung, which I did, but the Samsung rep just told me to call Wind again.
So, in the end, my situation is that I have 1 unlock attempt left, I have a pure stock phone (running 4.1.1, Baseband T889VVLALJ4 (I used Odin to flash image from SamMobile)) that has the flash counter tripped to 4, but at the Odin screen, it says:
Product name: SGH-T889V_NA_VTR (I thought Wind was supposed to be GLW)
Custom Binary Download: yes (4 counts)
Current Binary: Samsung Official
System Status: Official
Click to expand...
Click to collapse
I have tried what was suggested in this thread: http://forum.xda-developers.com/showthread.php?t=2014982 at least 10 times, I got the PERSO_NV_INIT is SUCCESSFUL message at the end at least 7 times, and in all attempts, when I put in the rogers SIM card from my iPad (only other micro SIM I have), it asks for an unlock code.
So now, I think my only option left is to try a third party unlocking service, and hope that it works... does anyone have any suggestions for such service?
Also, is it possible to reset the unlock counter at all/if this fails horribly, am I stuck with Wind for good?
Thanks,
StackUnderflow said:
Hi,
This is for a Canadian T889V (note 2) from Wind Mobile.
A few weeks ago I tried to use the online form to get an unlock code from Wind (they let you have the code after 6 months for $10), and the code didn't work, I called their customer support multiple times, and all I got was, try the same code again (tried it rooted/unrooted/completely stock, etc, etc...), and I'm down to the last unlock attempt.
They also suggested I call Samsung, which I did, but the Samsung rep just told me to call Wind again.
So, in the end, my situation is that I have 1 unlock attempt left, I have a pure stock phone (running 4.1.1, Baseband T889VVLALJ4 (I used Odin to flash image from SamMobile)) that has the flash counter tripped to 4, but at the Odin screen, it says:
I have tried what was suggested in this thread: http://forum.xda-developers.com/showthread.php?t=2014982 at least 10 times, I got the PERSO_NV_INIT is SUCCESSFUL message at the end at least 7 times, and in all attempts, when I put in the rogers SIM card from my iPad (only other micro SIM I have), it asks for an unlock code.
So now, I think my only option left is to try a third party unlocking service, and hope that it works... does anyone have any suggestions for such service?
Also, is it possible to reset the unlock counter at all/if this fails horribly, am I stuck with Wind for good?
Thanks,
Click to expand...
Click to collapse
Hi
I am also with wind and recently obtained the code same way you did. I am rooted running jedix 16 at the time with twrp as my custom recovery. So i am on 4.1.2 and the code worked right away. I dont think you should be on 4.1.1 to do it.
Sent from SGH-T889v Canadian Wind Mobile
vseslija said:
Hi
I am also with wind and recently obtained the code same way you did. I am rooted running jedix 16 at the time with twrp as my custom recovery. So i am on 4.1.2 and the code worked right away. I dont think you should be on 4.1.1 to do it.
Sent from SGH-T889v Canadian Wind Mobile
Click to expand...
Click to collapse
The first time I tried it I used the code on Jedi Master 10 (which is based on 4.1.2 if I'm not mistaken), I also tried the code on 4.1.2 stock (**MA3 base band), and 4.1.1 (**LJ4 baseband).
Right now I think my main priority should be figuring out if its possible to reset the unlock attempts counter (and/or finding other unlocking procedures to bypass the code/counter completely).
I think I just screwed myself even more, I took it to a shady place to see if its possible to get it unlocked, they did some weird voodoo crap which I think bricked by modem. (any attempts to get it into service mode shows a blank screen)
I tried reflashing everything and restoring an old EFS from long ago, but the baseband version in settings->about phone says Unknown, and it kept saying no SIM card even if I use my original SIM....
Did anyone encounter this before? how to fix this? do I need to get the hardware fixed? is Samsung likely to help?
Edit: I'm fairly sure they used and NsPro
You could probably just flash a new baseband and all will be well... Also the RIL needs to match the baseband as well for it to work and come up in about phone, so try downloading get RIL from the play store and see if it detects a non matching RIL (it needs to match the baseband) also it requires root
Sent from my Nexus 4
stewi21 said:
You could probably just flash a new baseband and all will be well... Also the RIL needs to match the baseband as well for it to work and come up in about phone, so try downloading get RIL from the play store and see if it detects a non matching RIL (it needs to match the baseband) also it requires root
Sent from my Nexus 4
Click to expand...
Click to collapse
Hi, thanks for the response,
I downloaded getRIL and gave it superuser permission, and it said my device is unsupported.
Also, what do you mean flash a new baseband? I restored an nandroid backup all the way back from Janurary and that didn't store phone functionality.
Thanks,
Dang... That's a shame, It is probably because the nandroid doesn't backup the modem/baseband, by the fact that you made a nandroid I'm assuming you have a custom recovery?
Sent from my Nexus 4
stewi21 said:
Dang... That's a shame, It is probably because the nandroid doesn't backup the modem/baseband, by the fact that you made a nandroid I'm assuming you have a custom recovery?
Sent from my Nexus 4
Click to expand...
Click to collapse
I have TWRP, I've tried using Odin to flash the stock .tar.md5 file from sammobile, and that didn't work. So I've re-rooted after that and recovered an old backup.
Strangely, I have modem.emmc.win and modem.emmc.win.md5 in the backup directory, but no modem option in TWRP when trying to restore that backup...
well that makes everything a lot easier, dont worry about ODIN, its a pain in the a$$
grab a modem from here http://forum.xda-developers.com/showthread.php?t=2061031 (see if you can find one that matches your ROM, otherwise just try any)
flash it in recovery, clear cache and dalvik and reboot and you should be sweet
stewi21 said:
well that makes everything a lot easier, dont worry about ODIN, its a pain in the a$$
grab a modem from here http://forum.xda-developers.com/showthread.php?t=2061031 (see if you can find one that matches your ROM, otherwise just try any)
flash it in recovery, clear cache and dalvik and reboot and you should be sweet
Click to expand...
Click to collapse
I tried both modems (4.1.1 and 4.1.2) from Wind (GLW) to no avail, it still says Baseband unknown and it still wont recognize any SIM cards...
If I go to a store with an NsPro, will they be able to fix it?
What's an nspro? Also if you don't mind losing your data, flashing a whole stock rom package through Odin should get you going if all else fails
Sent from my Nexus 4
---------- Post added at 09:57 AM ---------- Previous post was at 09:54 AM ----------
You should be able to grab a complete Odin package over on samfirmware
Sent from my Nexus 4
stewi21 said:
What's an nspro? Also if you don't mind losing your data, flashing a whole stock rom package through Odin should get you going if all else fails
Sent from my Nexus 4
---------- Post added at 09:57 AM ---------- Previous post was at 09:54 AM ----------
You should be able to grab a complete Odin package over on samfirmware
Sent from my Nexus 4
Click to expand...
Click to collapse
It's a thing that came up in research that repairs IMEI damage (I think but I'm not sure), in any case I already tried flashing an entire stock ROM (multiple times, 4.1.2 and 4.1.1) through Odin, and it didn't work.
Have you tried different packages, from memory some don't include the baseband and bootloader and stuff like that (It's been a while since my Samsung captivate)
Sent from my Nexus 4
stewi21 said:
Have you tried different packages, from memory some don't include the baseband and bootloader and stuff like that (It's been a while since my Samsung captivate)
Sent from my Nexus 4
Click to expand...
Click to collapse
Yes, I've tried the stock from this post:
http://forum.xda-developers.com/showthread.php?t=2061031
And a rooted version from this post:
http://forum.xda-developers.com/showthread.php?t=1975560
StackUnderflow said:
Yes, I've tried the stock from this post:
http://forum.xda-developers.com/showthread.php?t=2061031
And a rooted version from this post:
http://forum.xda-developers.com/showthread.php?t=1975560
Click to expand...
Click to collapse
At this point if I bring it back to Wind (and by extension, Samsung) I think it's fairly obvious I voided my warranty, but if I pay (not sure how much though), would they be able to fix it?
I'm not sure sorry, because I bought my captivate off XDA and the time I bricked it I had to mail it to adam outler and get it made unbrickable
try downloading an ODIN package from samfirmware and flashing it, because the .zip packages you linked wouldnt flash the modem and RIL. Also GLW is Wind on samfirmware, so just search T889V and choose the newest GLW package, youll need to make an account to download it
stewi21 said:
I'm not sure sorry, because I bought my captivate off XDA and the time I bricked it I had to mail it to adam outler and get it made unbrickable
try downloading an ODIN package from samfirmware and flashing it, because the .zip packages you linked wouldnt flash the modem and RIL. Also GLW is Wind on samfirmware, so just search T889V and choose the newest GLW package, youll need to make an account to download it
Click to expand...
Click to collapse
I already tried that (if you mean http://www.sammobile.com/firmwares/), and I think it's the exact same one as the teshxx download (factory image, exact same size and file name inside the zip, I haven't done an md5sum due to being on Windows),
I reflashed rooted injected stock ROM, did triangle away, and unrooted, and I'll bring it to Wind and see if they will fix it for me tomorrow.
Thanks for your help!
I think I'm actually having the same problems as this guy:
http://forum.xda-developers.com/showthread.php?t=2195869
I also tried QPST, and got the same exception as him...
And by page 4 the 2nd post down, http://forum.xda-developers.com/showthread.php?t=2195869&page=4 he took it to Samsung, and they did some software voodoo to bring it back to life... Fortunately there's a Samsung repair center in my city, and hopefully I'll have the same luck as he did (they aren't open tomorrow though).
One last thing before you do that (lucky you've got a repair centre!) this post says the efs is backed up when you install Cyanogenmod http://forum.xda-developers.com/showthread.php?p=30716302
So you might be able to recover it
Sent from my Nexus 4
stewi21 said:
One last thing before you do that (lucky you've got a repair centre!) this post says the efs is backed up when you install Cyanogenmod http://forum.xda-developers.com/showthread.php?p=30716302
So you might be able to recover it
Sent from my Nexus 4
Click to expand...
Click to collapse
When I restored the old backup (didn't work), I had the efs check box checked in TWRP, and I assume that efs should be in the stock ROM (that's how the OP of that thread did it)
I was trying to install the Quantum Rom on my ATT Samsung Galaxy S3.
It failed a few times until someone posted that I need to update my bootloader to I747UCUEMJB. I was able to install the ROM after the update but now my phone won't recognize the SIM card that's worked flawlessly till I performed the bootloader update.
Is my phone done for good or is there something I can do here? Please help!!
Did you flash a compatible or updated modem?
audit13 said:
Did you flash a compatible or updated modem?
Click to expand...
Click to collapse
Sorry not really sure what that means. Also, just went in to my settings and under Baseband version I am seeing Unknown.
I checked the size of the bootloader I downloaded and it's only at 1.1 mbs and I just found the same bootloader online but at 623 mbs. I am assuming the bootloader I installed might be corrupt/fake?
I am downloading the larger file now and am going to try and install that too see if that helps?
There is no way the bootloader would be 623 MB.
Try flashing a modem from here: http://forum.xda-developers.com/showthread.php?t=1831898
audit13 said:
There is no way the bootloader would be 623 MB.
Try flashing a modem from here: http://forum.xda-developers.com/showthread.php?t=1831898
Click to expand...
Click to collapse
Yeah figured as much, especially after looking at the contents of the file, I decided not to use it.
Thanks for the link. Just downloaded modem_CWM_I747UCUEMJB.zip and I have my network signal back up now. I am hoping this means I am good. Will let you know soon. Thanks!!!
theproman23 said:
Sorry not really sure what that means. Also, just went in to my settings and under Baseband version I am seeing Unknown.
I checked the size of the bootloader I downloaded and it's only at 1.1 mbs and I just found the same bootloader online but at 623 mbs. I am assuming the bootloader I installed might be corrupt/fake?
I am downloading the larger file now and am going to try and install that too see if that helps?
Click to expand...
Click to collapse
Your baseband/modem is indeed corrupt. Before downloading or flashing ROMs please research thoroughly to be sure you know what you are doing and understand the difference between all the different files. The file you saw at 623mb is most likely the system or ROM file itself. The bootloader file itself is a much smaller file - consistent with a 1MB+ download. If you succeed with the file you are trying to download, you most probably would be updating your ROM although I'd be very doubtful if it would work. I'm not too certain but the 623MB file looks like the 4.3 update zip which usually works only when you are doing a manual update from an earlier ROM especially the immediate predecessor 4.1.2.
To correct your modem, I would suggest you try downloading and flashing the 4.3 modem file.
You may also need to install custom recovery (e.g. TWRP or CWM) for an easier installation. I presume warranty is no longer an issue with your phone in view of the firmware history.
Edit;
Just saw the last post from Audit after sending mine. Glad to know all is OK now.
Larry2999 said:
Your baseband/modem is indeed corrupt. Before downloading or flashing ROMs please research thoroughly to be sure you know what you are doing and understand the difference between all the different files. The file you saw at 623mb is most likely the system or ROM file itself. The bootloader file itself is a much smaller file - consistent with a 1MB+ download. If you succeed with the file you are trying to download, you most probably would be updating your ROM although I'd be very doubtful if it would work. I'm not too certain but the 623MB file looks like the 4.3 update zip which usually works only when you are doing a manual update from an earlier ROM especially the immediate predecessor 4.1.2.
To correct your modem, I would suggest you try downloading and flashing the 4.3 modem file.
You may also need to install custom recovery (e.g. TWRP or CWM) for an easier installation. I presume warranty is no longer an issue with your phone in view of the firmware history.
Edit;
Just saw the last post from Audit after sending mine. Glad to know all is OK now.
Click to expand...
Click to collapse
I completely understand what you're saying. Truth is I don't enough about all this to do what I did. Lesson learned for sure!
So. I was able to install the Modern bootloader and have my LTE signal back up and confirmed things are working given someone already called me and the call came through fine.
Now, the last thing I need to figure out is how to get WIFI to work. It's connecting to my router and has gone through authentication and has saved my network on the list of WIFI spots but I can't seem to connect and start downloading apps without eating my data.
Never mind, finally got wifi to work. Thanks again!!
Are you using any sort of encryption on your wifi network (i.e. WPA, WPA2, etc.)? Can it connect if you disable encryption?
Enjoy full stock AT&T Odin with last April security :
Download N920AUCS4EQD1
thanks for upload ! i'm not in US this is the only way i can upgrade my phone !
in the US but now a cricket-eer. Thanks for the file.
I can't wait to try this when I get home tonight.
The 1.99GB file size is so intimidating as though this one is REALLY packed with extra AT&T bloatware
I'm rocking nougat and I love it...but i want the latest security patch outside the US...i had to sideload to get to nougat...
Is there a way I can use VPN to enable my phone get updates outside the US?
is this full 7.0 rom?
sadfasfasfd said:
is this full 7.0 rom?
Click to expand...
Click to collapse
No this is half of rom.. It said in title ..
On Edge of Galaxy
norbarb said:
No this is half of rom.. It said in title ..
On Edge of Galaxy
Click to expand...
Click to collapse
hey bud do you know where i can get the full rom?
oh sorry im 2 stupid to understand lol
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
shay1324 said:
hey bud do you know where i can get the full rom?
oh sorry im 2 stupid to understand lol
Click to expand...
Click to collapse
btw thank you very much the rom is amazing
but not that much ram left
shay1324 said:
hey bud do you know where i can get the full rom?
oh sorry im 2 stupid to understand lol
---------- Post added at 08:35 PM ---------- Previous post was at 08:29 PM ----------
btw thank you very much the rom is amazing
but not that much ram left
Click to expand...
Click to collapse
I think you flash PIT file with it? If you did just go to recovery and factory reset and your memory should be back.
norbarb said:
I think you flash PIT file with it? If you did just go to recovery and factory reset and your memory should be back.
Click to expand...
Click to collapse
this might sound silly but can anybody confirmed this has worked on their device please. i am on the att n920A note model and i live in Jamaica and wants to get the nougat update, however i am scared i brick my device
kemistrypops said:
this might sound silly but can anybody confirmed this has worked on their device please. i am on the att n920A note model and i live in Jamaica and wants to get the nougat update, however i am scared i brick my device
Click to expand...
Click to collapse
Yes, it works. I have just updated my N920A from C6 to D1. Don't forget to backup your data first.
:highfive:
jaritico said:
thanks!, last time i did adb sideload (C6 to D1) and i got problems wich home and power button, auto press / autoclick it Without having pressed, i think can be google screenseach new function which hijacks the home button and when it is not turned on it does not return to the normal state of the phone
*i solved temporaly doing restore device form options menu, but it reappears from time to time without having pressed, Fixed if you do not configure or start googleseachapp (temporaly)
*Now downloading file and coming soon installing from odin an odin fresh installation from last version is better than doing adb sideload from B2 or older
Click to expand...
Click to collapse
Downloading this through Odin - would that be considered tampering? - I have had 7.0 on a sprint note 5 and I loved it. I now have an AT&T note 5 on cricket and I have to wait for cricket to come out with the update ... zzz .... does samsung s health and pay still work after flashing through Odin? I'm only using this phone until the new note phones come out, so I don't want to mess up selling this phone by downloading through Odin. - thanks in advance.
michael85tx said:
Downloading this through Odin - would that be considered tampering? - I have had 7.0 on a sprint note 5 and I loved it. I now have an AT&T note 5 on cricket and I have to wait for cricket to come out with the update ... zzz .... does samsung s health and pay still work after flashing through Odin? I'm only using this phone until the new note phones come out, so I don't want to mess up selling this phone by downloading through Odin. - thanks in advance.
Click to expand...
Click to collapse
Everything's works. This is AT&T 100% sigh stock firmware.
On Edge of Galaxy
OK just to be clear - making sure before I download this since with 7.0 there's no going back - This doesn't trip Knox or Samsung? I don't want to mess anything up just want 7.0 now instead of waiting months or so for the update through cricket. Thanks in advance. Also, I seen a post say this is just a partial/half of 7.0 is that fixed or us this still just half of the 7.0 upgrade?
can someone make a google drive mirror? because I have 1gb limit in mega
michael85tx said:
This doesn't trip Knox or Samsung?
Click to expand...
Click to collapse
No. This is an official ROM with matching modem bootloader, and recovery. It will not trip Knox.
ok last question - is this the full 7.0 now? I see the title says full but there was a post saying this was just partial of the update.
Yes, this is the FULL 7.0
hello.
im a newbie to samsung and odin although i have had success with other samsung phones and odin a while back and after reading tons of info this is where i am at :: (i know the nougat file isnt the same but im guess the procedure is the same) . i read that updating via odin you can jump basebands, however im guessing that is not true. my baseband ends en 3BPH4
i downloaded >> Nougat_N920AUCU4EQC6_Odin_Files.zip (2.0G) <<
from here https://www.androidsage.com/2017/03...ndroid-7-0-nougat-ota-n920aucu4eqc6-download/
fyi >> im using virutalbox windows 7 and odin to try to do this <<
after i unzip the files i get four tar files
AP_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_ lo w_ship_meta.tar
CSC_ATT_N920AATT4EQC6_CL10809541_QB12921033_REV00_ use r_low_ship.tar
CP_N920AUCU4EQC6_CP6021124_CL10809541_QB12921033_R EV 00_user_low_ship.tar
BL_N920AUCU4EQC6_CL10809541_QB12921033_REV00_user_ lo w_ship.tar
i select each one as per requested slot in odin and then hit start and then odin crashes.
since that didnt work i opend the ap.xxx.tar.rar for the ap slot and hit start. there was some activity int he odin message box. firmware update start. single download..... and left it like that for over 30 minutes and there was no change. so i shut the phone off and restarted and nochange on the phone.
THEN i opened that ap.xxx.tar.rar file and saw that there was tar.md5 file inside. extracted and repeated the process and since i dont have a pda slot i choose to open under the ap slot.
so far same deal. odin message says NAND Write Start.
(im starting to believe that headers are not correct and doesnt want to follow through withe update)
if someone can guide me in the right direction or help where i went wrong. do i really have download 20gb of 10 updates for each step by step update to get to nougat and adb sideload?? cuz that is crazy. any help to get my note 5 lolipop to nougat is much appreciated.
also, if there is any knowledgeable buddy out there, since im on the 3BPH4 endind baseband is it rootable? (without loosing root when you reboot)
either way i dont care much about root but would definitely like tobe flashin roms etc, but as for now i just want to get to nougat
hello guys
i need some help and i hope one of you can help me bring my wife's phone back to life.
long story short.
my wife have SAMSUNG GALAXY A7 2017 sm-a720F
it got into a rebooting loop, so i did a factory reset, and i installed with odin v3.13.1 new firmware (PTR-A720FXXU5CRH3)
after i finished i notice that the phone not recognizing the sim card, when i try to see the IMEI it show unknown
what do i need to do?
did i installed the wrong firmware?
if so, what version do i need to install?
some phone details:
build: R16NW.A720FXXU5CRH3
core version : 3.18.14-14226331-QB19448723 [email protected] #1
SE for android: SEPF_SM-A720F_8.0.0_0016
knox: 3.1 ,knox api level 25
thank you all
waiting for your help
Mor1995 said:
hello guys
i need some help and i hope one of you can help me bring my wife's phone back to life.
long story short.
my wife have SAMSUNG GALAXY A7 2017 sm-a720F
it got into a rebooting loop, so i did a factory reset, and i installed with odin v3.13.1 new firmware (PTR-A720FXXU5CRH3)
after i finished i notice that the phone not recognizing the sim card, when i try to see the IMEI it show unknown
what do i need to do?
did i installed the wrong firmware?
if so, what version do i need to install?
some phone details:
build: R16NW.A720FXXU5CRH3
core version : 3.18.14-14226331-QB19448723 [email protected] #1
SE for android: SEPF_SM-A720F_8.0.0_0016
knox: 3.1 ,knox api level 25
thank you all
waiting for your help
Click to expand...
Click to collapse
You might have done the wrong one like you said. Did you flash the latest firmware?
Sent from my Samsung SM-A520W using XDA Labs
yes i think this is the latest firmware but with the wrong carrier.
what should i do now?
Mor1995 said:
yes i think this is the latest firmware but with the wrong carrier.
what should i do now?
Click to expand...
Click to collapse
Flash the right carrier.
Sent from my Samsung SM-A520W using XDA Labs
iloveoreos said:
Flash the right carrier.
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
haha sure but i dont know which one is the right firmware, i bought the phone from a local store, without specific carrier for the phone.
also, i was able to find my IMEI written on the back cover of the phone.
is it possible to write the IMEI into the phone and just to make it work?
also, when im entering recovery mode to wipe the phone for new firmware installation, it says ""failed to find /misc partition"
Mor1995 said:
haha sure but i dont know which one is the right firmware, i bought the phone from a local store, without specific carrier for the phone.
also, i was able to find my IMEI written on the back cover of the phone.
is it possible to write the IMEI into the phone and just to make it work?
also, when im entering recovery mode to wipe the phone for new firmware installation, it says ""failed to find /misc partition"
Click to expand...
Click to collapse
you will get that error message as a ton of us do. should be an "e" in there somewhere.
I've heard of your situation when flashing older modem/bootloader in a custom rom.
You seem to know enough to grab odin and flash, that's a lot more than many so that's good. Not sure who sold you the phone, but if you want to rule out anything shady I suggest running the IMEI to check on the status.
What country are you in? Where did you download from? And did the phone bootloop soon after attempting to use it with a new SIM?
I looked on sammobile and the only information I could use shows multiple countries. My phone bootloops all the time but that's called learning.
Download the phone info app... heck you might as well go all out and put twrp on it and root/install custom rom. Go all in.... i'll be here waiting...
---------- Post added at 04:15 AM ---------- Previous post was at 04:10 AM ----------
Honestly, though... grab the phone info app in the playstore and post the results.
If you THINK it may be stolen and got ripped off, don't put a SIM in it.
Not sure if it is true, but I think it can be rendered unusable if it is hot. But most likely it's just hurtin' from a sour flash. Phone info... (twrp is easy and a touch of magisk will give more info if you get stuck) but I am a rookie.
You in Israel? Can only be one firmware there... flash a Palestinian firmware. It won't... ya know... nevermind.
Hello I was rooting my Moto g6 play and made the awful mistake of not backing up efs partition ( I know Dumb). I got it all done and booted up and now unknown imei. I was wondering if there where any tech savvy people on here that would know how to fix this problem. I know the Imei and if I fastboot getvar I can see the iemi. Plzz help thanks.
dill902 said:
Hello I was rooting my Moto g6 play and made the awful mistake of not backing up efs partition ( I know Dumb). I got it all done and booted up and now unknown imei. I was wondering if there where any tech savvy people on here that would know how to fix this problem. I know the Imei and if I fastboot getvar I can see the iemi. Plzz help thanks.
Click to expand...
Click to collapse
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
ninjakira said:
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
Click to expand...
Click to collapse
Thanks man and i know im kicking myself. would you happen to know twhat the newest update is?
dill902 said:
Thanks man and i know im kic,king myself. would you happen to know twhat the newest update is?
Click to expand...
Click to collapse
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150
As long as the imei isn't zero you should be able to get service back. I had the same issue when I flashed an older firmware like a moron. But when I took the update again, I got service back. I don't recommend it because I may have just been lucky, but no matter what don't flash the gpt, asdspo(?) And bootloader with the older firmware. It'll mess your life up.
Ok i guess ill have to wait it out. Tried to flash stock and still unknown imei and no base band version so guessing it was updated. Thank guys!
dill902 said:
Ok i guess ill have to wait it out. Tried to flash stock and still unknown imei and no base band version so guessing it was updated. Thank guys!
Click to expand...
Click to collapse
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
ninjakira said:
Just flash stock firmware. thats a pretty big mistake to make lol I'm pretty sure I made it quite clear in my guide to backup at least 2 or 3 times. But just flash stock firmware using the commands at the bottom of my guide. Even if the bootloader is locked the commands will work to reflash it still. The need links for stock firmware is also in the guide. And I will say this. If you took the newest update before rooting then you will have to wait for that firmware to be uploaded because its not uploaded yet.
Click to expand...
Click to collapse
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Starkiller2 said:
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
dill902 said:
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
Click to expand...
Click to collapse
Ok so mine won't help then. I'm XT1922-7.
Starkiller2 said:
Try taking the update again over WiFi if you can. You shouldn't have an issue as long as you're back to stock. But the update is only 3 days old so you may have a chance.
---------- Post added at 04:44 AM ---------- Previous post was at 04:25 AM ----------
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
At this point no it's gonna need a full reflash of the firmware. I was having issues with my service and went and flashed the OEM file from the 2nd update through fastboot and did the erase carrier command and got my service fixed. Could try that.
---------- Post added at 05:22 AM ---------- Previous post was at 05:14 AM ----------
dill902 said:
Idk man i try to update and says its upto date i have the xti922-9 says im on OCP27.91-62
Click to expand...
Click to collapse
If you have the xt1922-9 then that means you have the att version if I'm not mistaken. If so just go to the links in my guide for stock firmware in the att folder. It has both the firmware your on plus the updated firmware from September which is ocp27.91-62-3 plus my guide will help you achieve root. Just please read it all
ninjakira said:
At this point no it's gonna need a full reflash of the firmware. I was having issues with my service and went and flashed the OEM file from the 2nd update through fastboot and did the erase carrier command and got my service fixed. Could try that.
---------- Post added at 05:22 AM ---------- Previous post was at 05:14 AM ----------
If you have the xt1922-9 then that means you have the att version if I'm not mistaken. If so just go to the links in my guide for stock firmware in the att folder. It has both the firmware your on plus the updated firmware from September which is ocp27.91-62-3 plus my guide will help you achieve root. Just please read it all
Click to expand...
Click to collapse
I flashed bout those firmwares and still nothing i dont understand whats going on or if im messing something up somewhere in the process. It flashes an everything seems to be ok other than the Imei unknown which causes the phone not to read my sim card if im not mistaken. Thanks for taking the time to try and help.
Starkiller2 said:
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150.
Click to expand...
Click to collapse
Baseband is software. Radio is a piece of hardware. The piece of hardware that gets your carrier's signal. It can't be upgraded without physically altering the phone. Even then it would need to be the same exact radio because the stock drives probably wouldn't work, and the chances of a dev making a version for 1 person with a different hardware would be slim to none.
Starkiller2 said:
@ninjakira Would my modem.img backup be of any use here? Or anything else? I don't know what is stored where.
Click to expand...
Click to collapse
If you want him to have your Imei number, you could but thats not a good idea.
Xplorer4x4 said:
Baseband is software. Radio is a piece of hardware. The piece of hardware that gets your carrier's signal. It can't be upgraded without physically altering the phone. Even then it would need to be the same exact radio because the stock drives probably wouldn't work, and the chances of a dev making a version for 1 person with a different hardware would be slim to none.
If you want him to have your Imei number, you could but thats not a good idea.
Click to expand...
Click to collapse
Thanks for correcting me. I'll be sure not to try again.
So what you guys are saying is I f-ed up and need to buy a new phone? Lol
dill902 said:
So what you guys are saying is I f-ed up and need to buy a new phone? Lol
Click to expand...
Click to collapse
Try flashing stock firmware. If that doesn't work there are other options still.
Sent from my Moto G6 Plus using XDA Labs
Xplorer4x4 said:
Try flashing stock firmware. If that doesn't work there are other options still.
Click to expand...
Click to collapse
Thanks I flashed every rom for my model and still nothing. Driving me crazy have to use an old junker phone till I find a solution lol
dill902 said:
Thanks I flashed every rom for my model and still nothing. Driving me crazy have to use an old junker phone till I find a solution lol
Click to expand...
Click to collapse
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Sent from my Moto G6 Plus using Tapatalk
Xplorer4x4 said:
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Click to expand...
Click to collapse
O ok well can you point me in the right direction to download the rom? Or whatever I need to download.
Starkiller2 said:
The newest build is only a few days old so it will be nearly impossible to find online. And it has a different baseband and radio than the previous build. But the October update is OCP27.91-150
As long as the imei isn't zero you should be able to get service back. I had the same issue when I flashed an older firmware like a moron. But when I took the update again, I got service back. I don't recommend it because I may have just been lucky, but no matter what don't flash the gpt, asdspo(?) And bootloader with the older firmware. It'll mess your life up.
Click to expand...
Click to collapse
Hello, as a bigger moron i flashed an older firmware because the networks were going nuts ( mobile data didn't connect even though i had an imei, and wifi and bluetooth just went on and off constantly). Now I don't have IMEI nor wifi(idk why it doen't work to get an ota update). What should I do?
I have a Moto G6 plus RETAR (Argentina) and the new update is not online because it went online today in the morning.
Thank you in advance
PD: I realized this thread is for the moto g6 play, anyway i believe you colud help me, plz I am desesperate
---------- Post added at 01:52 AM ---------- Previous post was at 01:46 AM ----------
Xplorer4x4 said:
You were flashing a gsi not a rom. Even then a rom and even less so a gsi, doesn't contain all the same data as what stock does.
Sent from my Moto G6 Plus using Tapatalk
Click to expand...
Click to collapse
Hello, as a moron i flashed an older firmware because the networks were going nuts ( mobile data didn't connect even though i had an imei, and wifi and bluetooth just went on and off constantly). Now I don't have IMEI nor wifi (idk why it doesn't work, to get an ota update). What should I do?
I have a Moto G6 plus RETAR (Argentina) and the new update is not online because it went online today in the morning.
Thank you in advance
PD: I realized this thread is for the moto g6 play, anyway i believe you colud help me, plz I am desesperat