Related
Pretty sure most people know how to do this but for some who are having issues with drivers n such this might help, wouldn't hurt imo.. I'm on Windows 7 Ultimate (x86)
*** Reportedly Will not work with Official OTA 1.47/2.05 Updates, only Rooted updates, I have not personally tried. The Wizards @ the dev forums are working on a fix: http://forum.xda-developers.com/showthread.php?t=714157 ***
The steps below worked for me. I had the latest clockwork recovery,Damage Control DC 3.2.2.1 deodexed and The latest rooted ota updates installed (EVO_1.47.651.1_De-odex'd_Rooted.zip, 2.05.00.06.10 update.zip)
Download and install HTC Sync Update http://www.htc.com/us/support/evo-sprint/downloads/ (if you already have it installed then click the repair option,
or better yet uninstall your current one even if it is the same one, reboot your computer and then install this one again, for good measure.)
1. I unplugged/plugged my phone into the computer a couple times,switched to htc sync mode when it asks what type of usb connection I wanted, to install more driver updates if any
and did 2 reboots on my computer to get all the drivers updated/installed and working as they should.
2. Turn off the phone, hold volume down and hold down power button to get to bootloader,
pressed Power button one more time to get to the menu where you can reboot bootloader,
rebooted bootloader once and twice BEFORE the unrooting process for good measure.
3. Download either one of the RUU Stock Roms, I would try RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe and then RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459.exe if the first one fails.
http://shipped-roms.com/shipped/Supersonic/
Alternate Link http://tinyurl.com/2fq4dzk
4. Plug your phone into your computer, make sure ALL Drivers installed properly if any, you may already have drivers installed, but double check, switch to HTC Sync mode
and let it install any drivers, then turn off your phone and start it in bootloader (Hold Volume Down +Power button) Reboot your computer also
to make sure everything has been properly installed.
5. Then you can finally double click (right click run as admin imo) the RUU.exe and start the unrooting process, good luck!
I try it and it don't work. I mean yet it detect my ota version but after I click update than for a while it said that my phone is not plug from the computer. I'm running windows 7 ultimate 64bit, eva x58 core i7-920
Thanks for the write-up, does this take the phone completely back to out-of-the-box stock?
yang704 said:
I try it and it don't work. I mean yet it detect my ota version but after I click update than for a while it said that my phone is not plug from the computer. I'm running windows 7 ultimate 64bit, eva x58 core i7-920
Click to expand...
Click to collapse
Make sure your in HTC Sync mode or Disk Drive Mode on your phone, also try rebooting your computer & phone, plugging your phone into a different usb port, etc, have to tinker with it a bit.
jasongthang said:
Thanks for the write-up, does this take the phone completely back to out-of-the-box stock?
Click to expand...
Click to collapse
Yes.
Worked for me earlier today. Failed the first time, but i just ran it again and it went through. Thanks for the writeup!
Np glad I could help
Sirchuk said:
Worked for me earlier today. Failed the first time, but i just ran it again and it went through. Thanks for the writeup!
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
do you have to have either 1.47 or 2.05 to use this method, or will the rooted supersonic 1.32.651.1 be able to do it?
because I installed htc sync, set the phone to HTC Sync, but the phone says it cant find it on my computer.
jasongthang said:
do you have to have either 1.47 or 2.05 to use this method, or will the rooted supersonic 1.32.651.1 be able to do it?
because I installed htc sync, set the phone to HTC Sync, but the phone says it cant find it on my computer.
Click to expand...
Click to collapse
Yes it will work for that version, you only set HTC Sync mode up to install any missing drivers, then you switch back to disk drive mode if you want your computer to gain access to your phones SD card.
Tundricles said:
Yes it will work for that version, you only set HTC Sync mode up to install any missing drivers, then you switch back to disk drive mode if you want your computer to gain access to your phones SD card.
Click to expand...
Click to collapse
so are you saying the htc sync doesnt have to actually sync? the phone never finds the htc sync on the computer. But I can get the computer to see the phone and access the sd card no problem.
Thanks for the write-up it worked just like planned. And with so many people returning for some reason or another this is just what we need
Im returning one and buying another at bestbuy HEHE
so will this return the Evo to shipped stock rom IF i did the OTA update? and will i be able to root if i have the OTA update?
thanks
I had the .6 stock(not root)and OTA updated to 1.47,how can I go back to .6 stock,I ran the .6 RUU,but it said main version older and refused to downgrade,anyone knows how do I reload the .6 back?my EVO ever rooted.
As far as I've been able to find by SEARCHING the forums:
NO
Once you do the OTA update you can NOT go back or downgrade or uninstall it or whatever.
This method posted is for installing a ROOTED ota update. ie, it was hacked, and rooted prior to being installed. If you downloaded it from sprint on your phone and installed it, your are SOL for now.
Sirchuk said:
As far as I've been able to find by SEARCHING the forums:
NO
Once you do the OTA update you can NOT go back or downgrade or uninstall it or whatever.
This method posted is for installing a ROOTED ota update. ie, it was hacked, and rooted prior to being installed. If you downloaded it from sprint on your phone and installed it, your are SOL for now.
Click to expand...
Click to collapse
That sucks...oh well,thanks for the info.
They're working on a fix, but I wouldn't hold your breath. Most of the devs are taking the weekend off for one reason or another.
Here's the discussion thread:
http://forum.xda-developers.com/showthread.php?t=714157
jasongthang said:
so are you saying the htc sync doesnt have to actually sync? the phone never finds the htc sync on the computer. But I can get the computer to see the phone and access the sd card no problem.
Click to expand...
Click to collapse
Yes, sync be damned!
Thanks for the write up.
Couldnt get it to go. Tried EVERYthing mentioned. Keep running into Error 170 USB connection error. I did dl HTC sync and let all the drivers install and rebooted my PC. And the phone.
Also tried multiple USB ports.
Nada.
not sure if this is any help, but I think the person in this thread had that same error, I hate to have you dig through the thread but I want to say it was mentioned on one of the later pages. Not sure if this is applicable to what you are doing.
http://forum.xda-developers.com/showthread.php?t=723236
elegantai said:
not sure if this is any help, but I think the person in this thread had that same error, I hate to have you dig through the thread but I want to say it was mentioned on one of the later pages. Not sure if this is applicable to what you are doing.
http://forum.xda-developers.com/showthread.php?t=723236
Click to expand...
Click to collapse
Thanks but sadly I've been through all the steps mentioned in all those links.
My USB is fine as I have been using it without issue.
I definitely cannot flash the .1 or .6 RUU.
I tried liquid jesus's method and it would not go either.
I'm stumped
Have u tried to flash the ruu as a zip?
Greetings fellow GNex owners and enthusiasts!
I've been trying to root my Galaxy Nexus unsuccessfully for the past week.
Here's what I've done so far:
1. I Unlocked the bootloader as per Droid-Life's instructions using an old method with the cmd prompt. (The complete How-To guide on their website) I installed the SDK on a windows 7 64-bit machine and went ahead with the process. This worked fine.
(*Note: My Gnex is stuck on 4.0.2 and it won't pull an update. I've tried the method of clearing the data from the framework app and resetting the clock to 1969 multiple times without success. probably 10-15 times.)
2. Since that I've tried uninstalling/reinstalling drivers, rebooting, and then rebooting some more. I've tried every available "noob-proof" method out there and i can't get it to work.
Tried Galaxy Nexus Tooklit v5.6
With and without the included drivers. tons of reboots and re-tries. root always fails.
Wugfresh's Toolkit 1.3
with and without the included drivers. tons of reboots and re-tries. root always fails.
Manually pushing CWM Recovery and SU to the phone with cmd promt via other tutorials floating around the internet, etc. Pushing CWM Recovery fails. Can't even get the temporary flash going to install SU
NOTHING works.
Is it because I unlocked the bootloader manually using an older method first?? I'm pretty sure I've been following the various instructions with each method accurately.
Can someone shed some light on me? I don't necessarily want to mess with kernels and custom ROMs. I just want to be able to wirelessly tether like I could with my OG and D2.
Thanks in advance,
Thanassi
Check my sig and try my method?
Haha.
But I'm guessing driver error.
The simplest method for getting drivers is to download and install pdanet on your PC. Then simply try again.
http://junefabrics.com/android/
I've had to root my phone 3 times and each time took 3 tries before it took. As mentioned before also make sure your drivers are good. And su files.
bow chicka wow wow.
Check my signature. Try that out.
TADA!! You're rooted, and you can flash stock 4.0.4 (And root it, at the same time ^^)
LG familyguy59\Beatsleigher
I'm a noob too.
I followed the following method:
http://galaxynexusroot.com/galaxy-nexus-root/how-to-root-galaxy-nexus/
After Step 6 when I went to step 7 I was unable to see "Android ADB Interface", so I re-installed the drivers and repeated step 6. It worked and the rest of the steps went like Clockwork.
See if this method works.
shohratshankar said:
I'm a noob too.
I followed the following method:
http://galaxynexusroot.com/galaxy-nexus-root/how-to-root-galaxy-nexus/
After Step 6 when I went to step 7 I was unable to see "Android ADB Interface", so I re-installed the drivers and repeated step 6. It worked and the rest of the steps went like Clockwork.
See if this method works.
Click to expand...
Click to collapse
As I am most likely NOT going to watch this video; Does it contain any Rundll32 commands?
If not, then the tutorial can't be all that good...
Because you need to tell Windows, that it should NOT always search Windows Update, for drivers. They're mostly crap, to be as nice, as I can...
familyguy59 said:
As I am most likely NOT going to watch this video; Does it contain any Rundll32 commands?
If not, then the tutorial can't be all that good...
Because you need to tell Windows, that it should NOT always search Windows Update, for drivers. They're mostly crap, to be as nice, as I can...
Click to expand...
Click to collapse
U don't need to watch the Video, you can read the details given in the site with the screenshots. Totally simplified.
No SDK, no rundll32 .... just installing of drivers and using command prompt
shohratshankar said:
U don't need to watch the Video, you can read the details given in the site with the screenshots. Totally simplified.
No SDK, no rundll32 .... just installing of drivers and using command prompt
Click to expand...
Click to collapse
Yes. You don't need the SDK, as a matter of fact
The Rundll32 part, is a fact, when installing the drivers...
It has the following effect:
You have installed ADB drivers (no Rundll32). You are flashing away, and all of a sudden. BANG! Everything stoppen. Phone's bricked... Why? Windows thought it is being smart, and installed new drivers, whilst you were working. However, with the RunDll32 command, you can tell Windows, that YOU want to install the drivers manually, and check manually. Of course, you can turn this off, if you want. No prob. but I personally recommend leaving it off
It's saved many phones' lives ^^
so you are having trouble with the adb or fastboot drivers? is so i had this problem too and sometimes even have to reinstall those drivers after flashing a rom.
i had to manually install the drivers using device manager, just select the android device and go to update driver. Choose "Browse my computer for driver software" then pick "Let me pick from a list of device drivers on my computer" then choose Google in that list.
Error
familyguy59 said:
Check my signature. Try that out.
TADA!! You're rooted, and you can flash stock 4.0.4 (And root it, at the same time ^^)
LG familyguy59\Beatsleigher
Click to expand...
Click to collapse
I get an error message with this application whenever I attempt to do something.
tried that
shohratshankar said:
I'm a noob too.
I followed the following method:
After Step 6 when I went to step 7 I was unable to see "Android ADB Interface", so I re-installed the drivers and repeated step 6. It worked and the rest of the steps went like Clockwork.
See if this method works.
Click to expand...
Click to collapse
Yea I tried that one too. Didnt work. pushing CWM Recovery always fails
thanassi44 said:
Yea I tried that one too. Didnt work. pushing CWM Recovery always fails
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=24360114&postcount=10
GSM only??
efrant said:
http://forum.xda-developers.com/showpost.php?p=24360114&postcount=10
Click to expand...
Click to collapse
Just followed that link but the CWM Recovery is for GSM. My nexus is LTE Verizon. Will this work?
Thanassi
thanassi44 said:
Just followed that link but the CWM Recovery is for GSM. My nexus is LTE Verizon. Will this work?
Thanassi
Click to expand...
Click to collapse
No, just replace the recovery with the late version. Look for it in the dev section. It has its own thread.
Sent from my Galaxy Nexus using Tapatalk 2
FINALLY! Have Root.
efrant said:
No, just replace the recovery with the late version. Look for it in the dev section. It has its own thread.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thanks for all your responses and suggestions. I finally got something to work. After some more driver swapping and rebooting, now on an XP machine, I got wugfresh's toolkit 1.3 to flash cwm recovery and I was able to install su. The program then ran an automated script to allow permanent flashing of cwm recovery. Got my titanium backup and from manager back, as well as wireless tether. Thank you all for your attention and patience!
Had such a hard time with this phone that I was beginning to have buyers remorse. Now its been set free.
thanassi44 said:
I get an error message with this application whenever I attempt to do something.
Click to expand...
Click to collapse
Sorry, but I've tested this program, over and over. I use it, myself. I never habe any problems...
But, I'm in the making, of a Youtube video. I'll post it, in my thread Then maybe you can see, what you did wrong
thanassi44 said:
I get an error message with this application whenever I attempt to do something.
Click to expand...
Click to collapse
Hang on... Did you install the scnd. file, within the ISO? If not, there's your problem...
I've literally tried every method on the internet to root the GSM Galaxy Nexus and I keep getting stuck at the very beginning: I can't get past the driver step and making sure the computer recognizes the phone as an ADB device. I've tried Samsung driver install, pdaNET drivers and just about any other method and I still can't get my computer to show that the device is a ADB device and therefore cannot root the phone.
Its a Play Store Galaxy Nexus running 4.0.4
all help is incredibly appreciated. I've been working on this problem since Friday.
I'm on a 64bit Windows 7 on a Dell XPS 15 computer
Jubakuba said:
If your Command Prompt displays the message "waiting for device" your driver wasn't successfully installed.
Close the Command Prompt window and open Device manager while your phone is still plugged in. (Search for it using the search option).
Right Click the "Android" option and select Update Driver. Choose to "Browse My Computer" and "Let Me Pick From A List." Pick the Samsung driver with the newest date and install it. Now retry the code above.
Click to expand...
Click to collapse
Try this.
I've tried updating via device manager. The problem is, it always says its up to date or when I manually select one it still doesn't work. Should I just not pick the newest driver? Pick an older version when selecting a new driver?
EDIT: also, another issue is that with Wug's when it searches for the adb device is searches in an odd folder that doesn't exist and I can't figure out how to change where it looks
Sent from my Galaxy Nexus using xda app-developers app
Or download the GNex Toolkit. Was having driver issues as well today (they were installed but for some strange reason Windows didn't recognize it anymore) and used the ones that come with this toolkit to reinstall through device manager. Of course as always with these things, use at your own risk, fiddling with drivers can be tricky .
What are you getting from your adb devices command? I had a problem with mine showing as consistantly offline. I had to change from a frontal USB port (usually a bad idea anyway) to a rear port. Some device/computer combinations make adb unhappy when using a USB hub, which most frontal USB ports essentially are.
Cilraaz said:
What are you getting from your adb devices command? I had a problem with mine showing as consistantly offline. I had to change from a frontal USB port (usually a bad idea anyway) to a rear port. Some device/computer combinations make adb unhappy when using a USB hub, which most frontal USB ports essentially are.
Click to expand...
Click to collapse
When I use WugFresh and check for ADB it checks a nonexistent directory and returns an error. I found another method on google (I think the webpage was Foolproof method or something) and I check through command prompt and when I do it says List of Devices: then a blank line underneath
EDIT: just installed the GNex toolkit and drivers, plugged in, adb devices and it returned the blank line
EDIT 2.0: I just witnessed the most beautiful thing in the world. I plugged in again and it miraculously worked. I think I might tear up and cry a little
Yeah, for some reason the USB Driver in the Android SDK does NOT work. This was incredibly frustrating when I was trying to unlock my phone originally. I spent probably 30 minutes googling and trying different driver downloads.
I have attached the ones I used that DO work.
So here is the new story:
unlocked bootloader but it did not factory reset. It rebooted and my phone is as it was.
When I went to do fastboot boot boot.gsm.img, It says boot.img downloads and then it takes me to the google logo screen and gets stuck
The 4th Derivative said:
So here is the new story:
unlocked bootloader but it did not factory reset. It rebooted and my phone is as it was.
When I went to do fastboot boot boot.gsm.img, It says boot.img downloads and then it takes me to the google logo screen and gets stuck
Click to expand...
Click to collapse
I've never rooted an already installed ROM for the Galaxy Nexus, but might I ask why you're not just installing a pre-rooted ROM from recovery? It'll save you a lot of headaches for sure. Even if you're not into custom builds, there's plenty of AOSP pre-rooted builds out there
Gunthy` said:
I've never rooted an already installed ROM for the Galaxy Nexus, but might I ask why you're not just installing a pre-rooted ROM from recovery? It'll save you a lot of headaches for sure. Even if you're not into custom builds, there's plenty of AOSP pre-rooted builds out there
Click to expand...
Click to collapse
I don't think the pre-rooted ROMs get OTAs, or do they? I've been trying to root on stock so I can still get OTAs and I like how stable it is. I've messed with other ROMs on other phones and I almost always go to stock or CM but I'd rather stick to stock on this for now
Okay I can understand that. However do realize that once you install an OTA, your root will probably be gone and you'll have to root manually once more ...
i actually delete any driver and use the pdanet works just fine, i had the same problem that you. is just mather of patience.
Gunthy` said:
Okay I can understand that. However do realize that once you install an OTA, your root will probably be gone and you'll have to root manually once more ...
Click to expand...
Click to collapse
Yea re-rooting is fine. I really only need root for a few days to get my phone set up but K really don't need root privileges in everyday use so losing root once I've done what I need is ok
Gunthy` said:
Okay I can understand that. However do realize that once you install an OTA, your root will probably be gone and you'll have to root manually once more ...
Click to expand...
Click to collapse
Maybe not. SuperSU has a feature to keep root when installing an OTA.
The 4th Derivative said:
Yea re-rooting is fine. I really only need root for a few days to get my phone set up but K really don't need root privileges in everyday use so losing root once I've done what I need is ok
Click to expand...
Click to collapse
Man.. as easy as this:
Go to bixie's jb rom thread, he has there linked a supersu+busybox cwm flashable zip, dl that and copy it to the device. Dl also a non-touch cwm image.
Unlock your bootloader, bla bla follow guides on how to set up/use fastboot, BOOT cwm (not flash it) with 'fastboot boot cwm.img', flash that supersu zip, reboot. Done, you rooted jb, install voodoo root keeper or something, back up root. Thats one way how to root a Nexus. You can even relock your bootloader after you finished customizing.
Sent from my i9250
Sorry guys, forgot to post last night. I finally got root. Thanks to all who helped! You all made my life so much easier
The 4th Derivative said:
Sorry guys, forgot to post last night. I finally got root. Thanks to all who helped! You all made my life so much easier
Click to expand...
Click to collapse
hey, i have the same problem as you do on updating the usb driver. mind telling me how you do it? thanks!
I put it in a different USB port (my sata+ if it matters) and found a method online. I cant remember where on mobile but I'll look it up once I'm home
Sent from my Galaxy Nexus
The 4th Derivative said:
I put it in a different USB port (my sata+ if it matters) and found a method online. I cant remember where on mobile but I'll look it up once I'm home
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
its okay already. i have found the solution. thanks
The 4th Derivative said:
So here is the new story:
unlocked bootloader but it did not factory reset. It rebooted and my phone is as it was.
When I went to do fastboot boot boot.gsm.img, It says boot.img downloads and then it takes me to the google logo screen and gets stuck
Click to expand...
Click to collapse
EDIT
Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
don't use windows..
Ditto
dstenc said:
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
Click to expand...
Click to collapse
glen4cindy said:
Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Click to expand...
Click to collapse
I was able to gain root back using the toolkit. I flashed stock rom image I believe the ROM from the factory then flashed back stock recovery. Went back in after I updated and re-rooted to flash the triangle away. Now I need to unroot and after speaking with Sprint Rep on phone and trying a few things they advised me to take it to store to let them try it. I believe ALL of my problems started when I tried to use Mobile Odin Pro to flash the latest update to LJC (should I have been on stock recovery?). It started to flash then stopped and went into CWM recovery which is the recovery that the toolkit flashed. I for some strange reason was going to flash the update from there except I didn't have it in the right place on my sd card (couldn't access it GOD I'm a Dumbass!). God help me cause I'm too stupid to even understand what side loading is let alone how to do it. If some kind soul would take pity on me and pm me I could get a handle on the differences between HTC and Samsung. Anyway need to unroot now. Oh I keep seeing in the flash counter saying 1 but I'm on stock rom with stock kernel and stock recovery how do I get it to zero. Using triangle away. Anyway to check counter with stock recovery?
OH yeah does anyone keep getting "Internal Error Code 1500" in addition to the hardware id is missing?
Thanks to everyone that takes time to help idiots like me. I promise I CAN learn.
Charles
chrisc627 said:
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
Click to expand...
Click to collapse
Thank you...Unlike user: dstenc, the above procedure fixed my issue. As has been the case many times, XDA helpful users to the rescue!
:laugh: :good:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Could you walk me through your fix?
dstenc said:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Click to expand...
Click to collapse
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Could you walk me through your fix?
Mods please delete double post sorry
ceabbott2 said:
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Click to expand...
Click to collapse
I don't remember link. I googled so you might try that way.
Just FYI, even with older drivers I have sporadic Hardware ID Missing error, but far too less than with the latest version.
I'm posting this to keep it to the top of this board.
This is my second Note 2 in 2 weeks. I returned the first one because it stated Hardware ID missing, so within my first 2 weeks Sprint gave me a new one thinking that it was my phone. While at the Sprint store, and not yet rooted, we installed the unit and removed the unit 15 times to see if we could get it to have the Missing Hardware ID to pop up, it DIDN'T pop up once, so I thought I was good to go.
I came home and did the common root method that uses Galaxy Note 2 Toolbox. I IMMEDIATELY started getting the Missing Hardware ID again.
So now that we have it localized, what could be missing or creating a problem from the root procedure from the Galaxy Note Toolbox 2???
What I find really strange is that many are not experiencing this problem or they are just living with it.
I even tried the USB Switcher that appeared to install and does switch between Mass Storage and MTP, but although my PC makes the upward noise that sounds like it is installing and recognizing the USB Mass Storage, it doesn't end up recognizing it. It was ZATTA's build but he said it didn't work for his Galaxy 3 or Note 2 either.
Will anyone find a cure????
This will be no fun to have to deal with for the next 2 years.
Chime in PLEASE!!!!!! Even if it's only to insult me, I don't care if you have a cure.
Regards
Dave
if you do Google search, it's a known issue. From what I read, it's a driver issue. Some have had luck using the older Samsung USB drivers. You have downloand them, and install, and have your PC completely disconnected from the internet before plugging in your GN2 after the install. Appaarently the drivers on Microsoft's servers are bad; may be the wrong device.
I've done this, and still have the issue. I just find I don't have plug and unplug the USB cable as much.
What I have seen, the PC does connect to the GN2. It just doesn't recognize it as a storage device. It wants to use it as a modem, probably from the tethering capabilities with a USB OTG cable.
It may not be so much that it's not wide spread, but more that not everyone uses the GN2 as storage device or connects it their PC.
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
knightfox said:
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
Click to expand...
Click to collapse
Yep I think you may be on to something. Because when I rooted I tried both TWRP and CWM and then I had to go back to stock to get to apply the LJC update. Ever since I have had the chameleon error and Handsfree activation issues. Oh my counter always says 1 and I can't remove it with triangle away. I think it says custom binary yes and the counter says 1. I am using a laptop with Windows 7 and it now recognizes the device just can't stop the errors on start up.
Charles
Sent from my SPH-L900 using xda premium
Samsungs older drivers: uploaded.net/file/hdh0f1xd
Long story short - Bought an LG D851 off Swappe. It came with CM13. I've been sticking nightlies on it. Currently on 2/14. I tried to put 2/18 and found that TWRP wasn't working - it hangs on TWRP Splace. Then I noticed SuperSU wasn't on the phone. So I installed it. Can't update the binaries. Looks like I don't have root.
Used LG Flash tool and flashed D85120E_00.kdz. Part way through, I get an error that the software cannot communicate with the server and it asks if I want to abort. I let it continue.
The phone reboots, I get the "Android is updating 1/196", etc. After which, it reboots, I get the boot jingle, and then it holds on the T-Mobile screen. I've tried flashing the KDZ a few times with the same result.
So now, I humbly, yet again, ask for help.
The endgoal here, is to have a working ROM with BT and WiFi working. I really don't care what it is at this point. Marshmallow is nice. Lollipop is okay. Whatever. I just need a working phone.
Thanks in advance, as always.
mdphoenix said:
Long story short - Bought an LG D851 off Swappe. It came with CM13. I've been sticking nightlies on it. Currently on 2/14. I tried to put 2/18 and found that TWRP wasn't working - it hangs on TWRP Splace. Then I noticed SuperSU wasn't on the phone. So I installed it. Can't update the binaries. Looks like I don't have root.
Used LG Flash tool and flashed D85120E_00.kdz. Part way through, I get an error that the software cannot communicate with the server and it asks if I want to abort. I let it continue.
The phone reboots, I get the "Android is updating 1/196", etc. After which, it reboots, I get the boot jingle, and then it holds on the T-Mobile screen. I've tried flashing the KDZ a few times with the same result.
So now, I humbly, yet again, ask for help.
The endgoal here, is to have a working ROM with BT and WiFi working. I really don't care what it is at this point. Marshmallow is nice. Lollipop is okay. Whatever. I just need a working phone.
Thanks in advance, as always.
Click to expand...
Click to collapse
Ouch!!! Read my CM13 post...you don't need SuperSU anymore (CM13 has root built in)--I had the same problem a while back--fixed it by flashing the old factory version on the phone & then used Purple Drake to root it & then installed CM13...Was a HARD lesson for me.
Upshot---No SuperSU needed--No BusyBox needed on CM13. If you are used to the old way of doing things--you'll get B0rked big time.
Luck to you!!!!
debianmain1 said:
Ouch!!! Read my CM13 post...you don't need SuperSU anymore (CM13 has root built in)--I had the same problem a while back--fixed it by flashing the old factory version on the phone & then used Purple Drake to root it & then installed CM13...Was a HARD lesson for me.
Upshot---No SuperSU needed--No BusyBox needed on CM13. If you are used to the old way of doing things--you'll get B0rked big time.
Luck to you!!!!
Click to expand...
Click to collapse
I guess trying to push the SuperSU binaries is what effed up TWRP?
I'll check out your CM13 post. But the issue I have is that I can't flash a factory version with LG Flash Utility. I mean, it does, but now it just sits on the Tmobile splash.
Hopefully your post will show me something I missing.
@debianmain1 is this the post you're talking about? http://forum.xda-developers.com/showpost.php?p=65432245&postcount=158
I tried that DD command to no avail last night. I tried everything I could find before reaching out to everyone for help.
mdphoenix said:
I guess trying to push the SuperSU binaries is what effed up TWRP?
I'll check out your CM13 post. But the issue I have is that I can't flash a factory version with LG Flash Utility. I mean, it does, but now it just sits on the Tmobile splash.
Hopefully your post will show me something I missing.
@debianmain1 is this the post you're talking about? http://forum.xda-developers.com/showpost.php?p=65432245&postcount=158
I tried that DD command to no avail last night. I tried everything I could find before reaching out to everyone for help.
Click to expand...
Click to collapse
Yes--the SuperSU binaries B0rked my install real good ( as I understand it--2 different types of SU installed B0rks everything )..... And with CM13, you have to allow ADB & apps to have root. I've been modding phones for years now & CM13 threw me under the bus until I learned what to do... I use to ALWAYS root, install BusyBox & SuperSU---not with CM13
Ya--that won't help you I'd look up fastboot commands & try to flash it that way--sounds like you are stuck in a startup bootloop. I did see some info online about starting the G3 in fastboot--I had a very hard time getting my G3 fixed. Do you have a Linux computer to use? It's easier to work with some of the diag stuff with Linux.
debianmain1 said:
Yes--the SuperSU binaries B0rked my install real good ( as I understand it--2 different types of SU installed B0rks everything )..... And with CM13, you have to allow ADB & apps to have root. I've been modding phones for years now & CM13 threw me under the bus until I learned what to do... I use to ALWAYS root, install BusyBox & SuperSU---not with CM13
Ya--that won't help you I'd look up fastboot commands & try to flash it that way--sounds like you are stuck in a startup bootloop. I did see some info online about starting the G3 in fastboot--I had a very hard time getting my G3 fixed. Do you have a Linux computer to use? It's easier to work with some of the diag stuff with Linux.
Click to expand...
Click to collapse
I can always fire up an Ubuntu flash drive if necessary. I'll get working on Fastboot.
Thanks again!
@debianmain1 Hmmm, Fastboot doesn't seem to be functional. I've got download mode. Can I push something to it that way?
I managed to get somewhere yesterday. I tried flashing D85120e_00.kdz and it failed again. I got the "cannot communicate with server" error, then it rebooted and tried running initial setup and failed.
So I tried flashing D85110C_00.kdz. Much to my surprise, it worked! So I ran through initial setup and got the phone working to make sure all was well. I rebooted and got the Red 2. So now here I am. Guides show that I should be able to put it in download mode and reload factory firmware again. But all I get is the "Download Mode" graphic. It never switches over to the updating mode with the circular arrows. I fear the worst at this point, but I really don't know enough about the LGs to diagnose my own doom just yet.
Someone on Reddit pointed me in the direction of Board Diag. Unfortunately it doesn't appear to work on D851. Running out of options. Looks like it'll end up being an expensive learning experience.