Fire TV 1 - Rooted on 51.1.5.3 Home Screen Issues - Fire TV Q&A, Help & Troubleshooting

Hi all,
I have recently upgraded my FireTV 1 to the latest Prerooted stock image as per this forum page: https://forum.xda-developers.com/fire-tv/development/prerooted-stock-images-t2882337
Software Version: 51.1.5.3_user_515040320
I upgraded from FireOS 3 so did the TWRP recovery first.
I also installed the su /sdcard fix as outlined in the forum page as well.
Everything installed correctly, and the FireTV boots correctly to the main screen. I am experiencing problems however:
The Home, Your Videos, Movies and TV Shows screens never load, just stay black with the three small dots bottom right of screen animating.
The Apps and Settings screens work as expected.
Connection to the Internet works, Netflix and YouTube apps work as expected, as does Kodi and others.
Individual application updates work, and are automatically triggered as expected.
I have no DNS/IP filtering setup in my router or hosts file on the FireTV
I have blocked updates from running with the following command: pm disable com.amazon.device.software.ota
Any advice on getting the rest of the interface working would be greatly appreciated.

fionn.colvin said:
Hi all,
I have recently upgraded my FireTV 1 to the latest Prerooted stock image as per this forum page: https://forum.xda-developers.com/fire-tv/development/prerooted-stock-images-t2882337
Software Version: 51.1.5.3_user_515040320
I upgraded from FireOS 3 so did the TWRP recovery first.
I also installed the su /sdcard fix as outlined in the forum page as well.
Everything installed correctly, and the FireTV boots correctly to the main screen. I am experiencing problems however:
The Home, Your Videos, Movies and TV Shows screens never load, just stay black with the three small dots bottom right of screen animating.
The Apps and Settings screens work as expected.
Connection to the Internet works, Netflix and YouTube apps work as expected, as does Kodi and others.
Individual application updates work, and are automatically triggered as expected.
I have no DNS/IP filtering setup in my router or hosts file on the FireTV
I have blocked updates from running with the following command: pm disable com.amazon.device.software.ota
Any advice on getting the rest of the interface working would be greatly appreciated.
Click to expand...
Click to collapse
Since you are not blocking updates thru OpenDNS or thru your Router then my only advice is to do a cache wipe thru TWRP. Also make sure you don't have any VPN apps running. And also go into Settings/My Account & choose Sync Amazon Content & reboot.
Connect a keyboard to your FTV.
Then choose Launch Recovery.
Then go into WIPE & Choose Advanced Wipe.
From Advanced Wipe choose both "Dalvik / Art Cache" & "Cache" (This is not a Factory Reset).
Then Swipe to Wipe & restart your FTV.
It will take no more then 10 minutes to reload & everything should be unchanged (Apps, Settings, etc).
Then redo the ADB Method 1 FireOS 5 update blocking command. Just to make sure it is still blocking updates.
Use the "Troubleshooting" part of this guide for visuals:
http://www.aftvnews.com/how-to-installupdate-a-package-using-twrp-on-the-amazon-fire-tv/
If this doesn't work. Then maybe you will need to do a Factory Reset & reflash the whole PreRooted ROM.

Thanks for the advice.
Followed the steps suggested with the same results.
Would rather not factory refresh, however will do that if there re no other suggestions to try.
PS. I've also got a Fire Stick not rooted with latest firmware that works as expected, so shows there are no network reasons for it to not work on the FireTV

fionn.colvin said:
Thanks for the advice.
Followed the steps suggested with the same results.
Would rather not factory refresh, however will do that if there re no other suggestions to try.
PS. I've also got a Fire Stick not rooted with latest firmware that works as expected, so shows there are no network reasons for it to not work on the FireTV
Click to expand...
Click to collapse
You can try both forgetting the Wifi info & logging out & in of your Amazon Account.
Also restart your modem & router. And make sure you turned off both Featured Content.
Any chance you tried to debloat your device?
Guess you can try reflasing the PreRooted ROM without doing a Factory Reset. Only the same Dalvik & Cache. You would keep the same Apps installed. But you probably still need to reinstall the XPosed Framework. And update SuperSU. From what I remember.

After trying a number of different things I ended up performing a factory refresh following the guide from aftvnews
After doing that, blocking updates, re-installing the su sdcard patch, and then all my apps and settings everything is working as expected.
Thanks for all the suggestions. Happy to have everything back to normal again.

fionn.colvin said:
After trying a number of different things I ended up performing a factory refresh following the guide from aftvnews
After doing that, blocking updates, re-installing the su sdcard patch, and then all my apps and settings everything is working as expected.
Thanks for all the suggestions. Happy to have everything back to normal again.
Click to expand...
Click to collapse
Glad to hear everything has been resolved. :good:

Related

[GUIDE] New Fire Phone with FireOS and Google Apps - A Start-to-Finish Walkthrough

I just got a Fire Phone via the Ebay sale, and like many others, I wanted to set it up with Google Apps. I also wanted to keep the working camera and NFC, so I decided to stick with FireOS. Doing that took a lot of searching, and flipping through multiple threads. It can get a little confusing. So I've collected all the steps here to help others (and myself, in case I need to do this again in the future, when I inevitably break something while tinkering). I've written this from the perspective of someone who has purchased a brand new Fire Phone from a third-party seller.
PLEASE NOTE: Much of this is the work/discoveries of other forum members. I'll link out to the original posts whenever possible. Please thank those people accordingly!
1. When you first start up your phone, connect to WiFi, and let it go through the upgrade process to 4.6.4. Now is the time to register your phone with Amazon (by signing in with your Amazon account). You want that year of Prime, don't you?
2. SIM Unlock the phone (if you aren't using AT&T). It's easy!
a. Use a paperclip to pop out the SIM tray
b. Insert a non-AT&T nano-sized SIM card. (Mine came with an AT&T SIM in it. You can't use this card to SIM unlock)
c. A window should pop up, prompting you to enter the code that is on your box. Enter it.
d. Done!​
3. Open Settings>Applications & Parental Controls>Prevent non-Amazon app installation. Turn App Installation to ON
4. Make sure ADB is set up on your computer. (this is an easy guide to follow if you don't already have it: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378 )
5. Download the following file to your desktop computer:
GSM Unlocked Firmware (this is a 1.2gb file) (http://forum.xda-developers.com/showpost.php?p=62768812&postcount=2). Rename this update.bin, and put it into the folder where ADB is installed.​Now we get our hands dirty:
6. If you are using Windows (I'm not), follow the directions that @Bingo Bronson posted here: http://forum.xda-developers.com/showpost.php?p=62768812&postcount=2. @DePingus also has an illustrated guide for ADB on Windows here: http://forum.xda-developers.com/showpost.php?p=62844581&postcount=14
6a. If you aren't using Windows, you can follow my steps (the same, just without all the Android SDK stuff, assuming you installed ADB in step #4)
a. Connect your phone to your PC & boot into recovery: When the phone is off, hold PWR + VOL. UP until the recovery screen appears
b. From the list, choose "Apply update from ADB"
c. In the command prompt, enter the following:
Code:
adb sideload path/to/update.bin
d. It should take a few minutes. When it's done, reboot your phone​
NOTE: If for some reason this isn't working for you, @jack9955 has posted steps on how to downgrade via Safestrap here.
7. Open Settings>Device>Get Info About Your Fire Phone. Your current version will be listed under Software Version, and it should now be 4.6.3
At this point, you may need to repeat step 3. I didn't, but it's worth checking.
8. Open the Amazon app store (one last time) and download ES File Explorer.
9. In the Silk Browser, open up the following links and download the files:
KingRoot (http://forum.xda-developers.com/fire-phone/help/root-4-6-3-t3173322)
Updated Google Play Store files: (http://forum.xda-developers.com/fire-phone/general/google-play-store-4-6-1-version-4-apks-t3098592)​
10. Open ES File Explorer, navigate to Download, and install KingRoot. Follow the directions to achieve root.
11a. At this point, some people like to remove KingRoot (out of security concerns) and replace it with SuperSu. I haven't done that yet, but you can follow the directions from @najoor here: http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546
12. Open ES File Explorer, navigate to Download, and unzip play.zip. Be sure to install the apks contained in the play.zip folder in the proper order (Thanks to @escape75 for these files)
1) Google Account Manager 4.4.2 (940549)
2) Google Services Framework 4.4.2 (940549)
3) Google Play Services 7.8.99 (2134222-036) - Updated
4) Google Play Store 5.8.8 - Updated​
13. After installing, I rebooted into recovery again, and wiped the cache partition. I don't know if you need to, but engaging in good housekeeping is never bad.
14. You should have a Play Store icon in your app drawer now. Click it to open, and holy crap!! It works. Plug in your google account details.
Now it's time to keep Amazon from wrecking all your hard work. Steps 15 or 15a will block OTA updates of the OS.
15. Go to Settings>Applications & Parental Controls>Manage Applications. Click Filter By and select All. Find each of the files listed below, click it, and then click the "Disable" button on the next screen. Repeat for the other three files. (thanks @Bingo Bronson)
Amazon Device Client
DCP Platform Contracts
System Update
System Update (yes, there are two different files named system update. Freeze/Disable both)​
15a. If you'd rather, you can do like I did, and use Titanium Backup Pro to freeze the above files.
16. Don't like the Launcher? Neither do I. I followed these directions to change out my launcher: http://spinyourfire.com/fire-phone-tips-and-tricks/fire-phone-launcher/ I use Home Switch from the Play Store. It will allow you to set your new launcher.
If you decide to use a new launcher, here's some info (courtesy @Bingo Bronson) which may help:
1. Settings>Display>Show Status Bar allows you to turn on the Status Bar at the top of the screen. This will help some launchers display properly.
2. Miss your NavBar / want some way other than Amazon gestures to navigate your phone? Try installing Ultimate Dynamic NavBar or Pie Controls.​
NOTE: The new launcher will disable Tilt Left/Right on your home screen. In Amazon apps, the gesture will still work.
17. To sync your contacts/calendars/etc, go to Settings>My Accounts>Manage Email Accounts and add your Google account info.
a. Select that account, check sync calendar and sync contacts.
b. Set Inbox Check Frequency to manual.
c. In Email Settings, set everything to off, then click email notification settings, and set all of those to off.​
BEWARE: HERE BE DRAGONS
Hi. Are you new to phone hacking? Then you should probably stop reading here. Following any of the links or info could (pretty easily) lead to bricking your phone. I won't even mess with most of this stuff, I'm just providing links for intrepid explorers who know what they are getting into, and are willing to risk it. SERIOUSLY, TURN AROUND HERE!
Seriously, you did all that work, and now you want to risk breaking it? Well yeah, me too. So let's cover our asses.
Backing Up with SafeStrap
First, let's back up what you've done. @ggow (to whom we all owe a debt of gratitude) has gifted us with SafeStrap, which allows us to boot into a version of TWRP recovery. From there, you can install his CM11 or SlimKat Roms, or use the backup feature, which is what we are about to do.
1. Install Safestrap from here http://forum.xda-developers.com/fire-phone/development/recovery-safestrap-v4-0-1-t3149888. In ggow's directions, it talks about 4.6.1, but I can confirm it works properly on 4.6.3.
2. Once you have booted into Safestrap, Click Backup and then back it up! (it took about ten minutes for me)
3. Of course, a backup won't do you any good if you don't have multiple redundancies. So plug your phone into your computer, open up a terminal/CMD prompt, and enter the following:
Code:
adb start-server
then
Code:
adb pull /sdcard/TWRP/ /path/to/your/backup/folder
after that runs for a while, you should see a message that says something along the lines of "12 files pulled. 0 files skipped"​
Good! Now we are backed up, and we can start breaking stuff.
Turn on USB Debugging
1. Go to Settings>Device>Get info about your Fire
2. Tap "Model Number" seven or eight times, until the "Developer Options" button appears at the bottom of the list
3. Tap "Developer Options" and enable USB debugging​Installing Xposed Framework
Xposed Framework allows you to install different modules that can change the look, feel and operation of your phone. Xposed works best on Vanilla Android, but we can definitely put it to good use here. Lifehacker has a great overview on Xposed. I'll just give you the basics here.
What you'll need: Root
1. On your phone, visit http://repo.xposed.info/module/de.robv.android.xposed.installer. Scroll down to the bottom of the page and click Show Older versions. You want the APK for version 2.6.1 (the most recent stable version)
2. After downloading, navigate to your Downloads folder and install the Xposed Apk.
3. Open Xposed and click Framework. It will show you that Xposed is currently inactive. Tap the install/update button.
4. Once installed, you must reboot your phone for Xposed to work.​Congrats! Now with Xposed, you can really start customizing your phone. Check the forums...there is tons to discover and lots of people who know far more than I about how to use it. Just remember that a lot of the cosmetic stuff might not work on a Fire Phone. The modules I use are: ACDisplay, Amplify (paid version), AppOppsXposed, GravityBox, Greenify (paid version), PowerNap.
Installing a custom Lock Screen
Many of us on Android are used to custom lock screens, and haven't been thrilled with the Amazon Lock Screen. Through some trial and error, I've discovered how to swap out the Amazon Lock Screen for my lock screen of choice, ACDisplay. I haven't tried this with other 3rd party lock screens. Try following (and contributing to) this lockscreen thread to see any developments on other lock screens.
What you need: Xposed, Root, ES File Explorer (or another file explorer with root access)
1. Install ACDisplay (I sideloaded the APK, but it seems to work from the Play Store)
2. Open ES File Explorer, tap the hamburger menu, scroll down to Tools, and turn on Root Explorer
3. find the installed apk (com.achep.acdisplay-1.apk) in /data/app
4. rename it LockScreen.apk and move it to /system/priv-app/
5. Reboot
6. Open up AC Display and grant it access to Accessibility Settings and Notifications
7. In ACDisplay>Settings>Lockscreen move the slider to On and make sure that "Enable when no notifications" is ticked
8. Open Xposed and activate the ACDisplay module.
9. Reboot
10. I don't know if you need to, but I went to Settings>Lock Screen> Turn on Notifications... and made sure that notifications were off.​
The Xposed integration seems to be the key. Now, when I reboot my phone, I'll get the original Amazon Lock Screen once (sometimes) and then ACDisplay pops up from that point on. Apparently, if you want a pin/password on the lock screen, you can still use the security features of the OS lockscreen.
Launchers with Widgets
One of the problems with custom launchers is that widgets don't seem to work on the Fire Phone. But @hmoobguy and @DePingus have figured out how to beat that in this thread. Just like with the lock screen, you'll have to move some files.
What you need: Root, ES File Explorer (or another file explorer with root access)
1. Install your launcher from the Play Store.
1a. If you haven't already, visit the Play Store on your desktop, look at the page for the launcher you just installed, and take note of what comes after 'id=' in the URL. That's the file name you'll search for.
2. Open ES File Explorer, tap the hamburger menu, scroll down to Tools, and turn on Root Explorer
3. find the installed apk for your launcher of choice in /data/app by searching for what came after 'id=' in step 1a.
4. move it to /system/priv-app/
5. Reboot​
Note: you can also use Titanium to convert your launcher of choice into a system app.
Other Stuff
@Bingo Bronson has a ridiculously extensive list of Fire OS apps that can be disabled/frozen or deleted. Use at your own risk: http://forum.xda-developers.com/fire-phone/general/complete-app-list-replace-remove-t3132008
Hopefully this is helpful to others. I can add information as I go if new info (and new annoyances) come to light. Please let me know if there is anything I missed!
Thanks man! That's a good list there!
I gathered much of the information you have posted there last night and I have it at 4.6.3 with Google Play and a custom launcher.
My next challenge is a single lock screen. I have yet to actually root it however.
Which seems it will be required to get any further with the lock screen deal based off what I've read thus far.
Cheers!
"curious what adds the extra slide lock, is it the adding of a different Launcher or Home Switch? Even when using the FirePhone launcher again it remains."
Natet2003 said:
"curious what adds the extra slide lock, is it the adding of a different Launcher or Home Switch? Even when using the FirePhone launcher again it remains."
Click to expand...
Click to collapse
I'm not quite sure what you mean here. I'm messing with the lock screen myself, haven't quite got it figured out yet. I use AC Display, and have been trying to freeze various apps listed in the App List post (at the bottom of the walkthrough under "HERE BE DRAGONS"). I can shut off the Amazon lock screen, but for some reason, my lock screen only works every other time. If I let it sit for a while and then unlock it, I just get the woven graphite background and nothing else. I have to turn off the screen, turn it back on again, and then my lock screen will work. I'm assuming it has something to do with the system putting the app to sleep.
Natet2003 said:
My next challenge is a single lock screen. I have yet to actually root it however.
Which seems it will be required to get any further with the lock screen deal based off what I've read thus far.
Click to expand...
Click to collapse
This thread has info on changing the lockscreen.
http://forum.xda-developers.com/fire-phone/help/fire-phone-lock-screen-t2982798/page5
You do need root. Install the new lockscreen (many people were using Next Lock Screen). Use a root file explorer to delete /system/priv-app/LockScreen.apk (make a backup first). Then move whatevernewlockscreen.apk from /data/app to /system/priv-app, rename it to LockScreen.apk and reboot.
I was having issues with the alarm clock and then I screwed up all the lockscreens. I gave up trying to fix my mess and just took the opportunity to install 4.6.3. That fixed all my issues and put me back to the stock crappy lockscreen, which I'm still running.
munkymack said:
I'm not quite sure what you mean here. I'm messing with the lock screen myself, haven't quite got it figured out yet. I use AC Display, and have been trying to freeze various apps listed in the App List post (at the bottom of the walkthrough under "HERE BE DRAGONS"). I can shut off the Amazon lock screen, but for some reason, my lock screen only works every other time. If I let it sit for a while and then unlock it, I just get the woven graphite background and nothing else. I have to turn off the screen, turn it back on again, and then my lock screen will work. I'm assuming it has something to do with the system putting the app to sleep.
Click to expand...
Click to collapse
I think I found what it was. I had "C Launcher" installed. It does an iPhone styled sliding lock screen that even when I swapped to another Launcher the lock screen kept activating. (So I had two screens to bypass) When I had experimented with GO Locker it added yet another screen to those so 3 screens!
So once I've removed CLauncher and GO Locker I've not just have a single screen, which is FireOS default lock screen.
Great instructions, well consolidated--thanks!!
Questions: 1. What's the reason you went through all the updates, all the way to 4.6.4 and then downgraded to 4.6.3. Could you just not have installed 4.6.3 from the beginning? 2. Also, why version 4.6.3? Is that the version on which google play works the best?--the reason I ask is because I too have read so many posts on this site and I have come to perceive that Google play still does not work perfectly on any of the versions!. Hopefully my perception is wrong and I can proceed with your consolidated instructions. Can you please post updates as the days go by on how its all working. Thanks.
dannyol said:
Questions: 1. What's the reason you went through all the updates, all the way to 4.6.4 and then downgraded to 4.6.3. Could you just not have installed 4.6.3 from the beginning? 2. Also, why version 4.6.3? Is that the version on which google play works the best?--the reason I ask is because I too have read so many posts on this site and I have come to perceive that Google play still does not work perfectly on any of the versions!
Click to expand...
Click to collapse
I went to 4.6.4 simply because my phone automatically updated from 3.5.0>4.6.1>4.6.4 when I connected it to wifi, and the directions I'd found showed how to downgrade from 4.6.4 (which is AT&T specific) to 4.6.3 (gsm unlocked).
The reason I chose to downgrade is because Play store doesn't work on 4.6.4...it keeps breaking. On 4.6.3, that's not the case (so far); Play Store (and even more important, Play Services, which is necessary for most Google apps) is working exactly like it should be. Might it break in the future? Yeah, probably. But if / when it does, I'll try and update the post (assuming that a fix gets found).
DePingus said:
This thread has info on changing the lockscreen.
http://forum.xda-developers.com/fire-phone/help/fire-phone-lock-screen-t2982798/page5
You do need root. Install the new lockscreen (many people were using Next Lock Screen). Use a root file explorer to delete /system/priv-app/LockScreen.apk (make a backup first). Then move whatevernewlockscreen.apk from /data/app to /system/priv-app, rename it to LockScreen.apk and reboot.
Click to expand...
Click to collapse
Just a heads up, DePingus and I have been discussing this on the linked thread, and the above instructions DO NOT work. LockScreen.apk does not exist in /system/priv-app/ on 4.6.3. At this point in time, there is not a way to completely replace the Amazon lock screen with a custom lock screen.
This is a good guide.
Just FYI, you don't have to enable USB debugging to root with KingRoot. And, more importantly, you don't have to be rooted or enable USB debugging to install 4.6.3, Google Play Services, or alternate launchers. Instead of adb push, you can just copy the apks over using your favorite method (USB, OneDrive, direct download) and then run to install. Come to think of it, you probably should move rooting and USB debugging into the "here be dragons" section.
Is it safe to update the play store when it asks?
MrPaulAR said:
Is it safe to update the play store when it asks?
Click to expand...
Click to collapse
Yes, as far as we know (for v. 4.6.3) Play Store can be updated and will still work, same with Play services.
New fire phone with version 3.5-rooted and now at a stand-still
Bingo Bronson said:
Yes, as far as we know (for v. 4.6.3) Play Store can be updated and will still work, same with Play services.
Click to expand...
Click to collapse
I too got my new fire phone on ebay. The fire phone has version 3.5. I read that it was a rootable version, so I proceeded to root the phone via towelroot . I have supersu installed also. I have verified root via an app and the phone is now successfully rooted. Now I am puzzled as to what I should do with the fire phone with version 3.5 and am at a stand-still!!.
Questions:
1. Can I update to version 4.6.3 from here without loosing root?
2. Will updating to version 4.6.3 in its present rooted condition cause any harm (i.e bricking) ?
4. If I need to remove root and supersu in-order to update the phone to version 4.6.3, how do I do that?
3. The reason for these questions is because I am assuming that I need to update to version 4.6.3 to install google apps.
Can you help me proceed along from this standstill that I find myself in!
Thanks
dannyol said:
I too got my new fire phone on ebay. The fire phone has version 3.5. I read that it was a rootable version, so I proceeded to root the phone via towelroot . I have supersu installed also. I have verified root via an app and the phone is now successfully rooted. Now I am puzzled as to what I should do with the fire phone with version 3.5 and am at a stand-still!!.
Questions:
1. Can I update to version 4.6.3 from here without loosing root?
2. Will updating to version 4.6.3 in its present rooted condition cause any harm (i.e bricking) ?
4. If I need to remove root and supersu in-order to update the phone to version 4.6.3, how do I do that?
3. The reason for these questions is because I am assuming that I need to update to version 4.6.3 to install google apps.
Can you help me proceed along from this standstill that I find myself in!
Thanks
Click to expand...
Click to collapse
I did the same thing when I first got mine, so I understand where you are coming from. After reading around on the forum, I saw that 4.6.3 could work with Play Store / Services, so I just did a straight up OS update. I didn't unroot or anything, and suffered no problems. My phone updated from 3.5 to 4.6.1, and then to 4.6.4. From that point, I downgraded to 4.6.3 and then proceeded with the steps in the guide.
As far as I can tell, you WILL lose root in the update, but you can use Kingroot to re-apply root.
Will this work on a Fire tablet? Would I just not run the GSM unlocked firmware part?
Thanks
jimbobalu said:
Will this work on a Fire tablet? Would I just not run the GSM unlocked firmware part?
Thanks
Click to expand...
Click to collapse
I have absolutely no idea. If it does work, let me know. I've got one of the new $50 fire tablets coming at the end of the month.
DePingus said:
Just FYI, you don't have to enable USB debugging to root with KingRoot. And, more importantly, you don't have to be rooted or enable USB debugging to install 4.6.3, Google Play Services, or alternate launchers. Instead of adb push, you can just copy the apks over using your favorite method (USB, OneDrive, direct download) and then run to install. Come to think of it, you probably should move rooting and USB debugging into the "here be dragons" section.
Click to expand...
Click to collapse
That's a good point. I've been doing this long enough that rooting is something I do without a second thought, but for beginners, it opens up the door to a host of problems. I'll do a reorganization next time it's slow around the office.
Thank you for the step-by-step guide. It was incredibly helpful and everything worked...expect for downgrading to 4.6.3. It may be because I'm on a Mac, but nothing I tried seemed to work. That is until I found this website that worked to perfection. Hopefully anyone else on a Mac finds it useful as well.
And apparently because I'm a new user, I can't post URL's, so here's the closest I can get you
seo-michael.co.uk/how-to-setup-adb-on-os-x
This phone is dirty cheap now.
i might grab one of these . here in Europe
cheers
Be sure and check the LTE bands before you do. You may not be able use high speed data there.
EDIT: I looked at the work in your signature. I'm pretty sure you know exactly what you are doing / getting yourself into if you do pick one up. I'm just trying to be super newbie friendly over here, hence my response.
Osufever said:
Thank you for the step-by-step guide. It was incredibly helpful and everything worked...expect for downgrading to 4.6.3. It may be because I'm on a Mac, but nothing I tried seemed to work. That is until I found this website that worked to perfection. Hopefully anyone else on a Mac finds it useful as well.
Click to expand...
Click to collapse
Yeah, ADB is different on every system, and can be a pain in the ass to set up. The Lifehacker article I linked should cover everything, but if Mac users want to delve a little deeper, then the link you followed is a good way to go. I'm glad you were able to get things working!

5.0.5 breaks a lot???

Hi all
Sorry if this is a repeat but hope not.
My AFTV updated to 5.0.5. Claims an installed date of 21 Jan 16, but only recently have I noticed a number of issues, so not sure why they took so long to show up, unless 21 Jan is actually the 5.0.5 build date, rather than install. So here's what I've found (on Fire TV and stick - got both).
1. First Llama stopped working - I used LLama events with Condition/Action setup to start Kodi whenever I started Ikono (and switched logos). Testing the condition appeared to work, i.e. Kodi fired up but the difference was that in the test BEFORE you used to see Ikono fire up for a few seconds then switch to Kodi. After the 5.0.5 the test just fired up Kodi. And then when you start Ikono in the normal way, Kodi does not fire. Same for all my other "shortcuts".
2. Wukong: would not work for a while, the mouse pointer showed up by clicks did not fire off any action on AFTV side. A few reboots and messing around solved it but even now a bit flakey, compared to solid before.
3. Side-loading: cannot side-load apps now! Can connect via ADB, but running "adb install xxxxxx.apk" results in a:
error: device not found
- waiting for device -
4. Apps that update themselves, e.g. ShowBox, are failing (probably for the same reason as 3)
So is this common? I'm assuming Amazon have put in a range of changes to lock-down the device? Are there any workarounds / fixes?
Jed
JedSpink said:
Hi all
Sorry if this is a repeat but hope not.
My AFTV updated to 5.0.5. Claims an installed date of 21 Jan 16, but only recently have I noticed a number of issues, so not sure why they took so long to show up, unless 21 Jan is actually the 5.0.5 build date, rather than install. So here's what I've found (on Fire TV and stick - got both).
1. First Llama stopped working - I used LLama events with Condition/Action setup to start Kodi whenever I started Ikono (and switched logos). Testing the condition appeared to work, i.e. Kodi fired up but the difference was that in the test BEFORE you used to see Ikono fire up for a few seconds then switch to Kodi. After the 5.0.5 the test just fired up Kodi. And then when you start Ikono in the normal way, Kodi does not fire. Same for all my other "shortcuts".
2. Wukong: would not work for a while, the mouse pointer showed up by clicks did not fire off any action on AFTV side. A few reboots and messing around solved it but even now a bit flakey, compared to solid before.
3. Side-loading: cannot side-load apps now! Can connect via ADB, but running "adb install xxxxxx.apk" results in a:
error: device not found
- waiting for device -
4. Apps that update themselves, e.g. ShowBox, are failing (probably for the same reason as 3)
So is this common? I'm assuming Amazon have put in a range of changes to lock-down the device? Are there any workarounds / fixes?
Jed
Click to expand...
Click to collapse
1) Lama does not work under OS5
2) Sometimes I have to reboot as well
3) go in settings/ Developer Options/and turn off and on ADB debugging a three times ....
bula1ca said:
1) Lama does not work under OS5
2) Sometimes I have to reboot as well
3) go in settings/ Developer Options/and turn off and on ADB debugging a three times ....
Click to expand...
Click to collapse
Thanks for confirming 1), I tried AutomateIt too and it seems to have the same problem, so I suppose it's some sort of OS-level blocking of the kind of hooks that Llama and others used in the past? Guess they could argue it was a security improvement as allowing one app to start another could be abused...
Re: Wukong and side-loading being blocked.... I played a bit more and similar results to you.... I don't think the OS is deliberately blocking / preventing but there may be a bug or issue. For example if I do a reboot of the box then, say, Wukong, will work fine but then tried:
adb kill-server
adb start-server
adb connect xx.xx..x.xx
and then quick test with: adb shell
and get the error: device not ready.
Do a reboot, don't connect Wukong and try the above commands and adb shell works (quick test) and then any commands like adb push / install work too. But then Wukong seems blocked, e.g. may connect as mouse pointer but using the click function does nothing, or may not connect at all.
I'll try your fix of the ADB debug off/on instead of reboot; and see how that goes.
Fun times!
Wukong seems working fine for me but the remote mouse for fire t.v. unable to click
did you carry on using your device as is with the same data from the old version?i.e. no factory reset after the update?
i ask because things often break after an OTA.
i factory reset my fire stick after the update and then again after kingroot(do not push super su on it yet if you want root-wait for a pre-rooted image if you want super su).
so after re-logging in, i enabled adb, sent kodi to the device and i can launch it from Apps on the left hand side, no need to go into settings anymore or even use llama. it's there. it won't be in the recent apps, i don't know why, but at least it shows up in apps.
i don't use wukong, but i have set up my rooted phone to be a bluetooth mouse, just encase or even use my ps4 touchpad.
El_Nino9 said:
did you carry on using your device as is with the same data from the old version?i.e. no factory reset after the update?
i ask because things often break after an OTA.
i factory reset my fire stick after the update and then again after kingroot(do not push super su on it yet if you want root-wait for a pre-rooted image if you want super su).
so after re-logging in, i enabled adb, sent kodi to the device and i can launch it from Apps on the left hand side, no need to go into settings anymore or even use llama. it's there. it won't be in the recent apps, i don't know why, but at least it shows up in apps.
i don't use wukong, but i have set up my rooted phone to be a bluetooth mouse, just encase or even use my ps4 touchpad.
Click to expand...
Click to collapse
Lama is broken in OS5. Are you sure about it?
bula1ca said:
Lama is broken in OS5. Are you sure about it?
Click to expand...
Click to collapse
i never said llama works under OS5.
all i said it's not needed anymore due to kodi being available to launch from the apps menu on the left hand side.
Zenroid said:
Wukong seems working fine for me but the remote mouse for fire t.v. unable to click
Click to expand...
Click to collapse
My remote mouse for fire tv works fine on OS5 prerooted rom
Zenroid said:
Wukong seems working fine for me but the remote mouse for fire t.v. unable to click
Click to expand...
Click to collapse
Hi that's what I get sometimes, shows mouse pointer but click does not work. I find a reboot of the fire box fixes... what i've noticed it that once you have got say Wukong working then adb will not do adb - install or push: gets the device not ready error. Again a reboot will fix but then, say, Wukong won't work properly.
So it seems like something is blocking the other process - hence why I was wondering if a bug.
Take on the point about doing a factory reset from @El_Nino9 but then I'll have to reinstall and setup Kodi and my other side-loaded apps from scratch?
Jed
JedSpink said:
Take on the point about doing a factory reset from @El_Nino9 but then I'll have to reinstall and setup Kodi and my other side-loaded apps from scratch?
Jed
Click to expand...
Click to collapse
as with all factory resets, you have to redo the setup. there are tools available to back up your setups and its easy enough to adb install apps. plus you might be able to push all the latest versions of the apps back on the fire if you haven't done so already.
it depends what you want to achieve and what you want to eliminate. it all involves doing some sort of work, however i understand the more little work you have to do the better it is. no need.
El_Nino9 said:
as with all factory resets, you have to redo the setup. there are tools available to back up your setups and its easy enough to adb install apps. plus you might be able to push all the latest versions of the apps back on the fire if you haven't done so already.
it depends what you want to achieve and what you want to eliminate. it all involves doing some sort of work, however i understand the more little work you have to do the better it is. no need.
Click to expand...
Click to collapse
You are right of course. Just being a bit lazy. It's mainly Kodi I worry about as I have a lots of add-ons and takes time to setup correctly. I know you can backup your Kodi configuration but never done a backup / restore of Kodi. Will take a look into it and if I can preserve my add-ons then will do factory reset and adb -install them again.
JedSpink said:
You are right of course. Just being a bit lazy. It's mainly Kodi I worry about as I have a lots of add-ons and takes time to setup correctly. I know you can backup your Kodi configuration but never done a backup / restore of Kodi. Will take a look into it and if I can preserve my add-ons then will do factory reset and adb -install them again.
Click to expand...
Click to collapse
i rooted my device and would use titanium back up. however kodi within itself has various tools.
they have an addon called back up and they also have other features.
however, on the stick, you can use storage easily unless you know how to adb well.
for simple use i would recommend titanium back up and then back up to a cloud service such as gdrive.
each user has different preferences.
if you aren't rooted just use the addon back up too or there is a 3rd party app that also does similar stuff which i've never used so can't help.
if you do decide to root, do not use supersume app after kingroot. stick to king root su until a rooted system image is released for the device. i used kingroot 4.1 from xda thread and despite it saying failed i had root.
if you're not comfortable don't do it
You can use Tasker instead of llama

Need Help Returning Rooted Box to Stock, Now stuck at Registration Screen

Hey guys, I am needing some help. I have a First Gen FireTv box that was rooted previously and is now stuck on the registration screen when you first start up the box.
Here's what I did to get to this place. The box was rooted with CWM recovery installed. I followed this guide and made it back to the registration screen. When I tried to log back into the firetv box I kept getting "The information does not match an Amazon account. If Sign in Approval is enabled, please follow the instructions on your phone." The problem is, that I don't have Sign in Approval enabled (that I know of) and I never received any type of message on my phone... During my sign in attempt, I also kept getting the Critically Low on Storage popup.
After trying to sign in, I tried to connect to the box using ADB again, and it actually worked. That told me that something wasn't quite right with the downgrade process so I re-installed CWM and ran through the guide again and then went in and did a wipe of all user data thinking it would clear up the storage issue. I am pretty sure the storage issue is cleared up, but unfortunately, I now cannot log into my firetv to check the firmware version or enable ADB. Is there anything I can do to fix this issue? Please help before I screw things up even more with this box (if that's even possible)
silverphoenix98 said:
Hey guys, I am needing some help. I have a First Gen FireTv box that was rooted previously and is now stuck on the registration screen when you first start up the box.
Here's what I did to get to this place. The box was rooted with CWM recovery installed. I followed this guide and made it back to the registration screen. When I tried to log back into the firetv box I kept getting "The information does not match an Amazon account. If Sign in Approval is enabled, please follow the instructions on your phone." The problem is, that I don't have Sign in Approval enabled (that I know of) and I never received any type of message on my phone... During my sign in attempt, I also kept getting the Critically Low on Storage popup.
After trying to sign in, I tried to connect to the box using ADB again, and it actually worked. That told me that something wasn't quite right with the downgrade process so I re-installed CWM and ran through the guide again and then went in and did a wipe of all user data thinking it would clear up the storage issue. I am pretty sure the storage issue is cleared up, but unfortunately, I now cannot log into my firetv to check the firmware version or enable ADB. Is there anything I can do to fix this issue? Please help before I screw things up even more with this box (if that's even possible)
Click to expand...
Click to collapse
Use any browser on your PC/Mac to recoup (using the email you used to create it) or create a new Amazon account. Then log in.
You should still look into moving into PreRooted FireOS 5. The low storage will be back quickly. That bug was never fix on FireOS 3. The only true fix is updating to FireOS 5.

Can't install Kodi on Fire TV1 anymore. Help!

Hello, I am about ready to give up on my Fire TV 1. Currently, I am on Software 51.1.6.3_user_516012020, and I apparently have root, bootloader, etc. However, due to low memory space, I ended up deleting (through ADB) the Amazon Home screen. Now nothing works. I did a factory reset (probably a bad idea), and still can't get anything to work. I have tried installing Kodi 17.4 with the Downloader app, and get a "parse error." Installation fails when I tried to install through ADBFire. Finally, install fails on App2Fire as well, with the message: "Upload successful, ERROR listing packages: Broken pipe."
I'm at a loss here. Any help would be greatly appreciated. I would even ship the device to you, if you could fix it! Should I just upgrade to a Fire TV 2 at this point?
Don't know if this will make any difference, but try sideloading the firestarter / appstarter app ( name was changed over time). In the app settings is the option to directly install the latest version of kodi. I've had a few issues in the past where I couldn't get it to install using adbfire, but it worked when using the appstarter / firestarter gui interface. I believe firestarter or appstarter still boots directly into its gui interface if you've got root. If you can sideload the appstarter or firestarter apk, reboot the fire tv and see if it boots into the app's gui interface. Go to settings and you'll see a kodi option allowing you to download kodi 17.4. No guarantees, but worth a shot.
Come to think of it, you've probably bricked it. See if there's anything that's useful in this article
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/

Netflix freeze (Jailbroken firestick)

Netflix on my jailbroken firestick freezes as soon as the login page loads up. I cleared the data & cache and reinstalled it but still the same problem.
I tried to download APK and install the previous version via Adblink but it was not really compatible with a firestick. I don't want to factory reset the firestick because it would un-jailbreak the firestick and I don't know how to jailbreak it since I bought it. Does anyone else having the same problem or know anyways to fix it? Thanks!
TaiwanNumbaWon said:
Netflix on my jailbroken firestick freezes as soon as the login page loads up. I cleared the data & cache and reinstalled it but still the same problem.
I tried to download APK and install the previous version via Adblink but it was not really compatible with a firestick. I don't want to factory reset the firestick because it would un-jailbreak the firestick and I don't know how to jailbreak it since I bought it. Does anyone else having the same problem or know anyways to fix it? Thanks!
Click to expand...
Click to collapse
Its "Android" not "iOS", so we don't jailbreak here, all you have to do is go to Settings and then "My Fire TV" then go to "Developer Options" and enable "Unknown Sources", Enabling this option allows you to install any app.
But in your case you have a rooted stick, then you will have to update your system via TWRP.

Categories

Resources