Hi everyone.
After flashing Lineage OS v14.1 on my lenovo k5 plus, it stucked in animation boot and I can't go to recovery. Someone told me to flash TWRP/rom using SP FLASHTOOL. But I have one problem: download don't start. Everytime I connect my phone, it only shows the battery charging. Is there a way to revive my phone?
keucasion said:
Hi everyone.
After flashing Lineage OS v14.1 on my lenovo k5 plus, it stucked in animation boot and I can't go to recovery. Someone told me to flash TWRP/rom using SP FLASHTOOL. But I have one problem: download don't start. Everytime I connect my phone, it only shows the battery charging. Is there a way to revive my phone?
Click to expand...
Click to collapse
There are already a lot of posts on the subject, please search a little before posting...
keucasion said:
Hi everyone.
After flashing Lineage OS v14.1 on my lenovo k5 plus, it stucked in animation boot and I can't go to recovery. Someone told me to flash TWRP/rom using SP FLASHTOOL. But I have one problem: download don't start. Everytime I connect my phone, it only shows the battery charging. Is there a way to revive my phone?
Click to expand...
Click to collapse
Just go to lenovo care i had same prblm they fixed it by reinstalling the os.
Related
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
graatenbil said:
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
Click to expand...
Click to collapse
Try to explain better! Do you have installed custom recovery?
no i installed a modified multi language rom from "needroom" did every as told and everything looked fine during the upgrade and when i was finished i got the green circle that says it was ok but when started it up it went in to boot loop and said "TOOL DL image fail!" but after a while its totally dead.,when i try now it wont load in any software into the phone ,just starts up the purple pre preparation on the SP flash tool but when i connect the phone it stops .cant get it into recovery mode or anything,just completely dead. i would rely be thankful for some advice her
Maybe the package you've tried to install is corrupted.
most likely, but is there anything to do with it or is it over for it.
graatenbil said:
most likely, but is there anything to do with it or is it over for it.
Click to expand...
Click to collapse
Most likely your device is unusable. Without any recovery, I dont think you will be able to do anything. I am sorry.
OK a 200$ experience richer , thanks anyway
graatenbil said:
OK a 200$ experience richer , thanks anyway
Click to expand...
Click to collapse
Just a question....are you able to enter fastboot?
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
hello my friend. I got exactly the same thing that I just tried to install TWRP. I stuck in Boot loop. solution found by disconnecting the battery. and making again the same procedure. but once I checked her DA DL All. Now how puts the battery is another story .but if I want i tell you, you need some tools that may have in your home..
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
setmov said:
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
Click to expand...
Click to collapse
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
RE
leo_alex82 said:
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
Click to expand...
Click to collapse
The phone started in normal mode after the battery dryed and the phone went off.
Hi, has anyone Lenovo S850 firmware upgrade solution? Now I have resolve "DL Tool Image Fail" problem but have another problem - every rom I download touch screen doesn't work. On "original" rom (not multilanguage) touch screen worked properly. Does anyone have "good" multilanguage rom with touch screen working?
method to install original rom android 4.4.2 in lenovo s850
i have found the perfact solution to install original 4.4.2 rom on lenovo s850...so for that you have to donload rom from the link in notepad file...i have uploaded notepad file and download link is in that it is about 1.1 gb...so it will take time to download and after that what you have to do is open flash tool and then check da dl check sum and then extract the file you have download of 4.4.2 android and then in flash tool click on scater loading and browse to the the extraction location and in extracted folder there will be a folder somethinf target bin in that folder select scatter loding file of lenovo s850 and then just simply click on upgrade firware and then switch off your phone and then wait to process complete untill green circle come...and if you dont have flash tool...google it and download...thanks i hope this helps someone...:good::good::good::good:
Dear devs, help me out on UNBRICKING LENOVO S850:
Initial Problem was: AFTER TURNING PHONE ON (NORMAL BOOT UP) IT GOT STUCK ON BOOT LOGO.
Very first tried solution: PRESSING BOTH VOL.+POWER PHONE WENT IN LENOVO RECOVERY MODE. THEN I TRIED TO FUSE FORMAT BUT IT FAILED TO FORMAT. PROBLEM REMAINED SAME.
Second Tried Solution: DOWNLOADED OFFICIAL STOCK ROM (A. Lenovo_S850_VIBEUI_V1.5_1419_2_ST_S850_4.4.2 B.Lenovo_S850_ROW_S211_140923 C. Lenovo_S850_ROW_S207_140814. D. Lenovo S850 official firmware flash file) + ALL AVAILABLE SP FLASH TOOLS + USB VCOM DRIVER FOR MEDIATEK AND INSTALLED DRIVERS.
USING ABOVE FILES I TRIED TO DOWNLOAD ALL ROMS WITH DIFFERENT SP FLASH TOOLS VERSIONS BUT ALL THE TIME RED BAR CAME TO 100% THEN BAR STUCK ON 0% FOLLOWED BY ERROR "SDMMC WRITE FAIL".
THEN I TRIED UPGRADING FIRMWARE, SAME AGAIN IT GAVE ERROR "FORMAT FAILED"
THEN I TRIED TO FORMAT USING FLAH TOOL (ALL VERSIONS) AGAIN IT GAVE SAME ERROR "FORMAT FAILED"
crazy
ur cable problem pp
I installed lineage-14.1-20170121-UNOFFICIAL-A6020.zip ROM today on my brand new Lenovo Vibe K5 ( Model# A6020a40 , HW version H201 ).
After installing successfully using TWRP, I rebooted and the device does not go past the boot-loader screen (showing "Lenovo"). "fastboot devices -l" is able to detect this device but Android startup does not happen.
I am loading any ROM for the first time on this device, so it may not be a ROM issue.
I made sure I did a factory reset before installing it. What did I miss?
Please help me to make it work.
a little help here please?
psriv said:
a little help here please?
Click to expand...
Click to collapse
Ask this on lineageos for vibe k5 thread.. there are two threads one by chaubeyprateek & other by skritch007
psriv said:
I installed lineage-14.1-20170121-UNOFFICIAL-A6020.zip ROM today on my brand new Lenovo Vibe K5 ( Model# A6020a40 , HW version H201 ).
After installing successfully using TWRP, I rebooted and the device does not go past the boot-loader screen (showing "Lenovo"). "fastboot devices -l" is able to detect this device but Android startup does not happen.
I am loading any ROM for the first time on this device, so it may not be a ROM issue.
I made sure I did a factory reset before installing it. What did I miss?
Please help me to make it work.
Click to expand...
Click to collapse
Hardware version is on sticker,most probably your hw version is 39 which @chaubeyprateek haven't added support to till now on lineage os,try aokp,aospextended,RR N,it will work.Do remember to take stock backups before flashing, because all custom roms on this device are pretty buggy and you would want to go back to stock from time to time.
I have got the same problem.
Phone version
Sent from my lineage_A6020 using Tapatalk
psriv said:
I installed lineage-14.1-20170121-UNOFFICIAL-A6020.zip ROM today on my brand new Lenovo Vibe K5 ( Model# A6020a40 , HW version H201 ).
After installing successfully using TWRP, I rebooted and the device does not go past the boot-loader screen (showing "Lenovo"). "fastboot devices -l" is able to detect this device but Android startup does not happen.
I am loading any ROM for the first time on this device, so it may not be a ROM issue.
I made sure I did a factory reset before installing it. What did I miss?
Please help me to make it work.
Click to expand...
Click to collapse
How did You flashed the TWRP and did you Rooted the device ?
I've a new phone, but don't have the tools, and would be happy to backup my phone and send you the ROM or whatever....so I can recover if need be
Hi, my Vibe P1 Pro (p1a41) device brick. I tried flash any stock roms with qfil. But i can only go stock recovery. When i vol+ plug cable to pc qfil see qualcomm but phone's screen black; not seen anything. When i phone open i see Lenovo logo but restart after. I tried all stock with qfil. Please help me :/
Sorry for my bad English.
Up, up, up :/
Now i only flash resurrection remix nougat rom. But imei is null and sim is not working. When i try qfil again; its bootloop Lenovo logo. What can i do?
Hi all! I ask your help! I have Moto z2 Force on 8.0 Oreo and I installed custom recovery twrp-3.2.1-1-nash.img and foolishly chose Slot-B and then I reboot the phone. Now when connected to a computer, it is defined as Qualcomm HS-USB QDLoader 9008 . How can I bring it back to life?! Help please! :crying:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
yakutza said:
After many attempts, it was possible to flash blankflash_from_NDX26.183-15_17. Phone reboot in fastboot and then full flash stock firmware.
Click to expand...
Click to collapse
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
PoisonDash2 said:
Samething happened to me but instead of selecting slot b my rom didnt install well so my phone is hardbrick any idea if this file will help me revive my Moto z2 force Tmobile version?
Click to expand...
Click to collapse
This happened to me on t-mobile yesterday and I managed to solve it by downloading this: (T-Mobile only) https://drive.google.com/file/d/1fM5KLheeMYcs3yF7InOzHq6yGCOmrrbk/view
Extract the zip and while your phone is connected to your pc and booted in bootloader mode, run flash_all.bat, boot (don't flash) TWRP, install TWRP with the TWRP zip found here: https://dl.twrp.me/nash/twrp-installer-nash-3.2.1-1.zip.html
Then reboot to your newly installed TWRP recovery, factory reset, flash rom, reboot bootloader and run "fastboot -w".
After that you should boot up fine. Fastboot -w might not be necessary but I had to do it, otherwise I would boot but I would get an error message "android.process.media has stopped" without it.
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Will71000 said:
Hello Friend!
Do you know if there is a solution for Moto Z2 Play? The update for Android 8 came automatically and I accepted. After a few days, he caught up and got into HardBrick! Neither the BootLoader options (power + volume (-)) are working !!
When I put it in the charger it will flash a white LED
Sorry, I'm using Google Translate
Click to expand...
Click to collapse
If its get detect as QHUSB_BULK in conputer and installing Qualcomm drivers get it to Qh_usbloader 9008 under COMports then theres no way ti revive ur phone. Theres no Blank Flash files yet available for Moto Z2 Play
i have levono k8 note which gone in restarting problem. then i downloaded the 7.1.1 firmware and flash it using sp flash tool. The mistake i made was i didnt enable developer options. After flashing my phone didnt startup . then i tried firmware upgrade option in sp flash tools. that also didnt work.
then i tried formate all and download option now my phone is completely dead, it doesnt boot ,just a black screen. only notification light glows ip when i connected to charging or using p flash tools . please help me im very poor guy and i dont have money to buy one and its been almost one month i dont have phone. please try to respond.
Facing same issue
My Lenovo K8 note is not starting detection in PC and charging after flashing.