First root and thought I had everything covered, but of course something hiccuped and now I have Unknown IMEI, Baseband, Hardware version, Software version and can't connect to the network. All my apps and wifi are working.
Before installing TWRP I looked for a way to backup my entire device and could find nothing that would work before rooting or flashing a recovery to replace the stock recovery. I finally just went ahead and flashed TWRP and created a backup with that. There were errors that had to do with the Samsung calendar app data that made the backup fail. I excluded data from the backup and was able to complete what was reported as a successful backup. I did not allow TWRP to install root access before reboot.
I then installed via Odin the Chainfire SuperSU successfully and thought was free and clear. When I rebooted everything worked fine, except the phone would not connect to network and reported "Searching for Service."
Upon investigation into that I discovered the other issues that all seem to be tied to the EFS partition. I tried restoring the EFS partition from the TWRP backup I created immediately after installing TWRP, but that fixed nothing. It seems that the TWRP installation itself was what killed the EFS partition data.
If I understand correctly, flashing the stock Sprint ROM L900VPUCOH3, should fix the problem, but then I would still have to restore the IMEI, which I can't do without a rooted device. Also, even if it worked, I couldn't backup the EFS partition only, without a rooted device. So my logic is that if I could get a functioning TWRP EFS only backup for my device, I could restore that, reset the IMEI and be back in the ballgame.
Before I started down this path my phone was lagging badly and freezing up. I did a soft reset and got the speed back, but then the apps began crashing randomly and intermittently, both the native ones and the downloaded ones. I then did a factory reset and everything worked right. I reinstalled my downloaded apps and kept my speed and stability. It took several days for me to download, configure and add all my accounts back manually and everything remained fast and stable. I would really hate to have to start from scratch all over again.
Any assistance would be appreciated. Below is what I looked like before I got maimed:
Software Version
L900VPUCOH3
Hardware Version
L900.09
Model number
SPH-L900
Android version
4.4.2
Baseband version
L900VPUCOH3
Kernel version
3.0.31-3084104
[email protected] #1
Mon Aug 24 17:13:18 KST 2015
Build number
KOT49H.L900VPUCOH3
SE for Android status
Enforcing
SEPF_SPH-L900_4.4.2_0033
Mon Aug 24 17:29:53 KST 2015
This is what I look like now:
Software Version
Unknown
Hardware Version
(blank)
Model number
SPH-L900
Android version
4.4.2
Baseband version
Unknown
Kernel version
3.0.31-3084104
[email protected] #1
Mon Aug 24 17:13:18 KST 2015
Build number
KOT49H.L900VPUCOH3
SE for Android status
Enforcing
SEPF_SPH-L900_4.4.2_0033
Mon Aug 24 17:29:53 KST 2015
If there is another approach that would rectify the situation then I am all ears. I can fix a computer, but phones are an entirely foreign animal to me. I'll be the first to tell you I don't know enough and welcome the learning experience, I just wish it it wasn't under life or death circumstances.
**UPDATE**
While still investigating possible solutions, something has come to my attention. I do not have the original IMEI info anywhere!! I have the MEID only. I was able to get the serial number from a Samsung registration email, and was able to use a converter to calculate the ESN from the MEID. I tried tap dancing with Sprint to get the IMEI, but all I could get from them was the MEID info I already had.
First of all, please keep away from TWRP since it causes many problems on the N2 from installation to flashing roms.
I suggest you to :
1- Flash with Odin a FULL restore image of stock rom (to restore partitions table, modem, and rebuild your IMEI).
2- Flash with Odin "Philz custom recovery", especially this version.
3- Flash SuperSU flashable Zip with Philz recovery.
Normally, everything should be fine (a working phone with root privilege).
Clarification of Stock ROM Version
zlazaar said:
First of all, please keep away from TWRP since it causes many problems on the N2 from installation to flashing roms.
I suggest you to :
1- Flash with Odin (...too new to even quote an outside url) a FULL restore image of stock rom (oh well...) (to restore partitions table, modem, and rebuild your IMEI).
2- Flash with Odin "Philz custom recovery", especially (...ditto) this version (ditto...).
3- Flash (...ditto) SuperSU flashable Zip (ditto...) with Philz recovery.
Normally, everything should be fine (a working phone with root privilege).
Click to expand...
Click to collapse
The stock ROM you linked to SPH-L900_NE2 causes me a bit of concern as my phone is on L900VPUCOH3. I was already up to 4.4.2 KitKat.
Unless there is some specific reason I should use the NE2 version, I am going to locate an OH3 version and work with that.
Thank you for your help, that was pretty much the route I thought made logical sense with the lack of a patch to my issue, to go back to stock and start over. I wasn't aware of any TWRP issues, so that was also a big help and I already have SuperSU.
While I wait for a response I am going to go and try to do my due diligence to find out more about Philz Recovery, so that I can move on and get back in the game. No phone for New Years Eve will suck a big fat one!!
zlazaar said:
First of all, please keep away from TWRP since it causes many problems on the N2 from installation to flashing roms.
I suggest you to :
1- Flash with Odin ... a FULL restore image of stock rom ... (to restore partitions table, modem, and rebuild your IMEI).
2- Flash with Odin "Philz custom recovery", especially ... this version[/URL].
3- Flash ... SuperSU flashable Zip ... with Philz recovery.
Normally, everything should be fine (a working phone with root privilege).
Click to expand...
Click to collapse
(This response took such a long time because between the holidays, typing the original reply which was lost due to a badly placed refresh touch-button on this keyboard and subsequent issues with the phone, I'm just getting back to it now. This one is much less detailed than the original that was lost.)
As per my previous reply regarding flashing NE2 instead of OH3, I couldn't find a source for the OH3 stock ROM that I was comfortable with, so I just went with your instructions and viola!, all was working again, with IMEI, MEID and everything else back to functioning. I had connection to the carrier network, and after 2 OTA updates, I was back to the OH3 version.
The installation of Philz Recovery and Chainfire's SuperSU went fine. So as far as my original issue, my phone was back to normal, with custom recovery and root added.
Thank you zlazaar for your assistance. Seeing that you were the only one that responded, you truly were a lifesaver for both me and my phone, and though I may have eventually gotten to the process you described by hit, miss or frustration, you save me a lot of time and angst since at that point my biggest concern was a working phone, not the root.
From there it went downhill because I ran into different issues, the only part that relates to this thread is this, should I have used the working TWRP to wipe the ROM before flashing the new stock NE2 ROM to the phone with ODIN? I flashed OVER what was there which might have caused the problems I had later on down the road.
I will post the problems I had after this in another thread when I have a chance and put a link to it here. That way I won't have to retype from the beginning, and anyone this might help can see other issues they may encounter.
On the up side, I think I'm pretty practiced in rooting the SPH-L900 and rooting it. Also, since Sprint couldn't fix or replace my Note 2 after I was done with it, I'm getting a Note 4 as a replacement. (I managed to brick it leaving a KIES error message as the only thing it would do besides Download Mode at power up or starting to recovery.) Worst case, if I brick the new Note 4
On the down side, now I'm going to have a phone I'm going to have to start from scratch learning what can and can't be done to it, as well as deal with the stronger KNOX...and now I have all these Note 2 ROMS (Funny enough, the tech at Sprint said he wanted to try more but they are so restricted on the internet he couldn't download the files he wanted. I said to myself, betcha I have the files he was looking for!!)
Warning: This post is long, and probably full of grammatical errors due to my writing it late at night. a TL;DR is included at the bottom, but to fully understand my problem, I encourage you to read the whole post.
Hello, xdadevelopers community. I really need your help. So, recently I learned how to install custom ROMs myself and the experience has been really informative but also very struggling. To make a rather long story short, I bought a used G3 from my friend, had him root it, put a custom ROM on it, and everything was working fine. Only, that ROM was on Android 5.1.1, which was contemporary to when it was flashed. I wanted 6.0.1, so I went about getting it. I eventually got that up and running with Resurrection Remix, but the battery life was completely awful. Idle is okay, but using the device results in completely intolerable battery life. I asked Reddit what to do, and someone recommend crDroid for it's great battery life. I attempted to install that, and that's where I got the problems discussed in this post.
Post where I got the ROM and GApps from
Specific ROM and GApps I got:
- crdroid-6.0.1-20160118-vs985
- So I go the one for Android 6.0.1, and the most recent one at that, last updated on the 18th of January, for my G3 model the vs985
- for GApps, I selected "ARM", "6.0", and "Stock" from the menu
Could another problem be that the ROM is 6.0.1, and the GApps are 6.0? If so, open GApps version exists of 6.0.1.
Basically, I downloaded the two zip files, the ROM and the GApps. I then formatted my device, wiped it, did a real quick, skip through everything set-up of my current ROM, enabled USB debugging, copied the two zip files (ROM and GApps, both of which were inside a folder I made called ROM) onto my devices internal storage (I don't have an SD Card), and rebooted into recovery. I'm using Team Win Recovery Project (TWRP) v2.8.6.1 if that's helpful at all. Once in recovery, again I wiped the device (using the default wipe function in TWRP, then doing an advanced wipe and specifically selecting cache and Dalvik Cache, just to make sure), and went to flash the ROM, finally. I navigated to the ROM folder it was located it, selected it, and swiped to flash the ROM. I got the following in response:
Installing '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip'
...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Checking for BASEBAND version 35B
ERROR: It appears you are running an unsupported baseband. assert failed: h3.verify_baseband("35B:MPSS.DI.2.0.1.c1.13.4-00005") == "1"
E:Error executing updater binary in zip '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip'
Error flashing zip '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip'
Updating partition details...
...done
Click to expand...
Click to collapse
So basically it failed to flash, apparently because of both an unsupported baseband version and a failure to execute a certain binary. Well, if you know how to fix the executing issue, that'd be great, although that's now what I'm focusing on here. I'm focusing on the baseband, because I believe that may be causing the failure to execute (although, as a newbie, I'm not sure if that's actually true). Apparently it was looking for version 35B, and that's not what I was running. When I set up my current ROM again just to be able to use the device, and checked for the baseband verion, it simply says "Unknown". Also, if you check out that link to the post above, it says:
We're mainly based on CyanogenMod so use custom kernels compatible with them!
Click to expand...
Click to collapse
. Well, I never installed a custom kernel, but I assume my friend did, because when looking at the kernel version on my phone it says:
3.4.0-CM-g74498f7
[email protected] #1
Mon Dec 14 09:48:16 EST 2015
Click to expand...
Click to collapse
.
I'm assuming if it was a non-custom kernel it would just have multiple numbers separated by periods, not have all that info, and it specifically says "CM" in there, so I assume that should work, but am not for certain.
Anyway, back to the baseband. It was looking for a baseband version 35B, which I apparently don't have. I have a few questions about this
1. How are you supposed to know your baseband version if your settings app returns "Unknown"?
2. How are you supposed to know what baseband versions work and what baseband versions don't work on the ROM you plan on flashing prior to doing so? I saw nothing about this from from start to failure to install.
3. If the ROM I intend to flash doesn't support my baseband version, can I install a custom baseband version?
I will admit, I don't even know what a baseband is, and I'm too tired to look it up as I write this.
So that's it. I realize this post is incredibly long but feel like if it was shorter, potentially important information would be nixed. I have a TL;DR below for your convenience, but as I just said, to get all the important information, read everything above, please.
TL;DR:
Tried to install a new ROM
Failed
Failing apparently due to unsuppported baseband version
I can't determine my baseband version b/c my settings app returns "Unknown""
If baseband is unsupported, how do I know which are?
Also apparently "E:Error executing updater binary in zip '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip' " is a thing. Caused by unsupported baseband version or entirely different problem all together?
Also maybe the ROM being 6.0.1 and the openGApps being 6.0 is a problem? If so, no openGApps 6.0.1 exist.
Please read the whole post to get all the detail needed.
NeatAndClean,
Thank you for providing the detailed information in this thread, so let's get to business.
First thing I want to straighten out is that you said your Baseband Version says "Unknown", i think you should check your IMEI information, if your IMEI is "null" then there is another problem to fix first.
If you have tried restoring from a backup after the "Baseband Unkown" issue and the Baseband Version still says "Unknown", then something happened whilst, or after you tried flashing CrDroid. At this moment I am not so knowledgeable about how to fix the Unkown Baseband issue, but it is a well known problem and usually coincides with the IMEI "null" issue. If you still are having that problem, I will try to find out how to fix it.
However, I will provide you with my full answer so this can hopefully get fixed at your preferred pace.
To start out, my questions are:
1. What ROM/Version of that ROM are you running right now? (I assume it is Resurrection Remix 6.0.1?)
2. Do you have a backup before trying to flash CrDroid? If so, I would suggest restoring from your backup to fix your "Settings Unkown" issue.
Once your Baseband "Unknown" problem is fixed, you can continue on to flash CrDroid (This time, it should work). Now I just downloaded the CrDroid zip file, that you used, on my PC. And just from opening it I can already tell that it is deeply based on CyanogenMod, but with some tweaks to make it CrDroid. Reason I mention this is because of this quote:
We're mainly based on CyanogenMod so use custom kernels compatible with them!
Click to expand...
Click to collapse
I'm not super knowledgeable on downloading Custom Kernels, but i do know that your Kernel:
3.4.0-CM-g74498f7
[email protected] #1
Mon Dec 14 09:48:16 EST 2015
Click to expand...
Click to collapse
is (I'm 99%sure) a CyanogenMod Custom Kernel, which comes when you flash a CM ROM.
Mine is:
3.4.0-CM-gc6520f1
[email protected] #1
Click to expand...
Click to collapse
and I'm running CyanogenMod 13, 6.0.1 on my vs985. Point is, you should be all set to flash CrDroid based on your Kernel.
Now, the "Unsupported Baseband" issue when flashing, at least CM based ROMs, is a known error recently. (In the past year I'd say) So the very common way to get around this, without having any issues, is to:
1. Go into your downloaded ROM zip, the zip you wish to flash, in your case it's crdroid-6.0.1-20160118-vs985.zip.
2. Extract the files into a folder (I'd recommend naming the folder the name of the .zip file, for ease in the end)
3. Open the extracted files folder
4. Open "META-INF" ==> "com" ==> "google" ==> "android"
5. Within that "android" folder, open "updater-script" file with Notepad, or a similar text editor.
6. Delete this line of code:
assert(getprop("ro.product.device") == "g3" || getprop("ro.build.product") == "g3" || getprop("ro.product.device") == "vs985" || getprop("ro.build.product") == "vs985" || abort("This package is for device: g3,vs985; this device is " + getprop("ro.product.device") + ".");
assert(g3.verify_baseband("35B:MPSS.DI.2.0.1.C1.13.4-00005") == "1");
Click to expand...
Click to collapse
7. You should be left with "ui_print("Target: lge/g3_vzw....." in your case.
8. Overwrite the edited "updater-script" back to it's directory (the android folder)
9. (Make sure you don't save it as a .txt file, it should still be a "File" (no extension))
10. Now go back to the "crdroid-6.0.1-20160118-vs985" folder after editing and saving "updater-script"
11. Select all the files/folders within, and add them to a .zip archive (Recommended by using WinRar)
12. You should end up with a .zip file visually identical to the original crdroid-6.0.1-20160118-vs985.zip, except this one has the edited "updater-script"
13. The edited one^ is the only one you need now, and is the one you will be flashing
14. Also, if you're curious I have done this many times with CyanogenMod, on vs985, and can assure you nothing bad will come of this... I assume the same is with CrDroid as it is deeply based on CM. (As long as you're "Unknown Baseband" problem has been fixed.
This procedure essentially gets rid of the Baseband/Model Check, ensuring a successful flash. Also as you can see in the code, it checks for the 35B:MPSS.DI.2.0.1.C1.13.4-00005 Baseband/Modem version, I believe "xdabbed" makes a flashable version of the 35B:MPSS.DI.2.0.1.C1.13.4-00005 Modem, which should eliminate the need to edit the updater-script. However, I strongly recommend to do the "updater-script" fix rather than trying to flash a different Baseband, as I have heard flashing a new Baseband can easily brick your phone, and you really do not need to do it.
I have Baseband: MPSS.DI.2.0.1.c1.13-00008, which does not match the "Baseband Check" and my ROM still works like a charm after the updater-script fix.
However, before you flash the edited crdroid-6.0.1-20160118-vs985.zip with your TWRP seperately, with the Marshmallow (6.x) ROMs right now, if you plan on using GApps you need to flash the ROM AND the GApps file at the same time in your custom recovery. Otherwise you will most likely get errors and you will need to re-flash the ROM and GApps.
Also maybe the ROM being 6.0.1 and the openGApps being 6.0 is a problem? If so, no openGApps 6.0.1 exist.
Click to expand...
Click to collapse
To answer this, no it is not a problem, you were correct.
1. The LG G3 is an ARM device
2. GApps only uses the first two digits in the OS version (i.e. 5.0.x or 6.0.x) (<==That "x" variable is the third digit in the OS version, and does not matter in GApps
3. All in all you have the correct version of GApps, no you just need to flash it at the same time as your edited ROM.
The procedure you did to flash the ROM was all good:
Basically, I downloaded the two zip files, the ROM and the GApps. I then formatted my device, wiped it, did a real quick, skip through everything set-up of my current ROM, enabled USB debugging, copied the two zip files (ROM and GApps, both of which were inside a folder I made called ROM) onto my devices internal storage (I don't have an SD Card), and rebooted into recovery. I'm using Team Win Recovery Project (TWRP) v2.8.6.1 if that's helpful at all. Once in recovery, again I wiped the device (using the default wipe function in TWRP, then doing an advanced wipe and specifically selecting cache and Dalvik Cache, just to make sure), and went to flash the ROM, finally
Click to expand...
Click to collapse
This is great, again the reason it didn't work was because of the mismatch in the Baseband Check, which shouldn't persist after following the instructions in the "updater-script" fix.
Anyway, back to the baseband. It was looking for a baseband version 35B, which I apparently don't have. I have a few questions about this
1. How are you supposed to know your baseband version if your settings app returns "Unknown"?
2. How are you supposed to know what baseband versions work and what baseband versions don't work on the ROM you plan on flashing prior to doing so? I saw nothing about this from from start to failure to install.
3. If the ROM I intend to flash doesn't support my baseband version, can I install a custom baseband version?
I will admit, I don't even know what a baseband is, and I'm too tired to look it up as I write this.
Click to expand...
Click to collapse
1. The Baseband Version is not supposed to state "Unknown", as i said in the beginning, this is a problem that happens sometimes, I am not sure why, or exactly how to fix it, but if you do some research I'm sure you will find something, I will also do some research so I can try to help you with that if it is not fixed by a Factory Reset or a Restore from Backup
2. The Baseband Version that a specific ROM calls for will be in that "updater-script" I was talking about, at least that's how it is for CyanogenMod based ROMs. I think your stock Baseband Version will work with any custom ROM, as long as it is a ROM made for your specific phone. That being said, I do think that the latest Baseband Version for your specific phone does improve Network, Cellular and GPS Connectivity, but again I do not recommend venturing there yet, until you have alot of background on it and can do it safely.
3. If the ROM you intend to flash doesn't support your Baseband, chances are the ROM is not made for your phone or you somehow have a Custom Baseband that is not made for your phone. I say that because even though you get that Baseband error when flashing CM based ROM, it is still supported, it's just that you do not have the "latest" Baseband Version I believe.
I do believe I have answered all of your questions, at least I hope so. I'm sorry that some things I could not answer in great detail, but I tried my best so that you could continue on enjoying your device. I also have the VS985 so I'm familiar with the device.
Summary:
1. Before anything try to Restore from Backup to fix the Baseband "Unknown" issue, as fixing this is priority. If that does not work I will try to find a fix online, or you can try to beat me to it.
2. Once that is fixed^ you can carry on with the "updater-script" fix i included.
3. Then flash the edited ROM and your 6.0, ARM OpenGApps at the same time (one right after another, without a Reboot in between)
4. Then you should honestly be all set
5. Your Kernel is all set for CrDroid
6. The GApps you said you downloaded is all good for the CrDroid version you downloaded
7. You could also try to flash back to vs985 stock (10B) this will hopefully give you your Baseband back if you still need it after Restoring from Backup
7. You should get no errors now! Yay. Now you can enjoy a Battery Optimized beautiful Marshmallow ROM
Click to expand...
Click to collapse
Please let me know if you have any confusion, I would be happy to provide you with clarification, screenshots etc.
I've run into a huge issue. My phone is semi-bricked now, and I don't know what to do. I was getting the baseband version error as well, and I removed the lines in the script and then it failed stating "wrong footer". I tried first installing CM, then like a fool, I installed Cyanogen Recovery over TWRP. Cyanogen Recovery can't do anything. But the install failed. I no longer have any version of Android on my phone, I can't install that baseband package with Cyanogen Recovery. Stock ROMs all come back "wrong footer" as well. I can't install anything. I have Fastboot/ADB installed. Please help!
Edit: I'm not sure if Fastboot is actually working. I can't get it to do anything. It just hangs on whatever command I give it, and it continues to hang until I unplug USB, then fails.
I've run into a huge issue. My phone is semi-bricked now, and I don't know what to do. I was getting the baseband version error as well, and I removed the lines in the script and then it failed stating "wrong footer". I tried first installing CM, then like a fool, I installed Cyanogen Recovery over TWRP. Cyanogen Recovery can't do anything. But the install failed. I no longer have any version of Android on my phone, I can't install that baseband package with Cyanogen Recovery. Stock ROMs all come back "wrong footer" as well. I can't install anything. I have Fastboot/ADB installed. Please help!
Click to expand...
Click to collapse
First off, in my response to @NeatAndClean I said to have the Baseband error fixed before proceeding, which is probably what caused your error.
For your Fastboot issue;
1. Make sure you are using the original Slimport cable (over-suggested, I know, just making sure)
2. Try USB 2.0 ports if you got them, if not, give this a shot forum.xda-developers.com/showthread.php?t=2256359
3. Try updating the phone's drivers
4. Otherwise, reinstall fastboot/ADB drivers or SDK Tools
5. Alternatively try this forum.xda-developers.com/showthread.php?p=48915118#post48915118
Assuming you have a VS985, here are stock IMG files:
forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
(If you do not have VS985 just find your Model's stock IMG files)
Here are commands you can use in fastboot once you manage to get it working, which will hopefully bypass your "Wrong Footer" issue. Obviously use your stock IMG files.
I would normally recommend flashing full stock TOT with LGFlashTool, but I'm not sure if it may worsen your Unknown Baseband issue (i.e. You may erase your IMEI if you Factory Reset when you have the Unknown Baseband problem) Here is everything you would need for the TOT Method: forum.xda-developers.com/showthread.php?t=2785089 - Also the old .dll needed for LGFlashTool probably won't work, so search LGUP_8974.dll and use that alongside the TOT instead) <== This should work if nothing else does, however, I don't think it will fix you "Unknown Baseband" but it may... I am not sure.
Finally, if you have ever made a previous backup, and still have it, if you restore from that your Baseband should re-appear and the error should fix itself. (I just figured you tried this already)
I once got the Unknown Baseband and IMEI - null issue, you could try to flash the stock Modem.img file for your phone, and try an IMEI injector program using the IMEI number in the battery compartment (Under the physical battery) But to fix mine I ended up calling the Customer Service and they eventually pushed an update file to my phone. I assume it was a Modem update of some sort, but it was a long time ago so I honestly don't remember.
I wish you good luck, as I know how frustrating these situations are. And keep in mind, I am only trying to help.
Please, to anyone experiencing the "Unknown Baseband Version" issue, focus on that before anything else, as you will most likely worsen your problem the more you do with the issue persisting.
Edit: Sorry, I didn't reach 10 posts yet, so you gotta drag 'n drop the links
Williquah said:
First off, in my response to @NeatAndClean I said to have the Baseband error fixed before proceeding, which is probably what caused your error.
For your Fastboot issue;
1. Make sure you are using the original Slimport cable (over-suggested, I know, just making sure)
2. Try USB 2.0 ports if you got them, if not, give this a shot http://forum.xda-developers.com/showthread.php?t=2256359
3. Try updating the phone's drivers
4. Otherwise, reinstall fastboot/ADB drivers or SDK Tools
5. Alternatively try this http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Assuming you have a VS985, here are stock IMG files:
http://http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
(If you do not have VS985 just find your Model's stock IMG files)
Here are commands you can use in fastboot once you manage to get it working, which will hopefully bypass your "Wrong Footer" issue. Obviously use your stock IMG files.
I would normally recommend flashing full stock TOT with LGFlashTool, but I'm not sure if it may worsen your Unknown Baseband issue (i.e. You may erase your IMEI if you Factory Reset when you have the Unknown Baseband problem) Here is everything you would need for the TOT Method: http://lgflashtool.net/index.php/tot-method/ - Also the old .dll needed for LGFlashTool probably won't work, so search LGUP_8974.dll and use that alongside the TOT instead) <== This should work if nothing else does, however, I don't think it will fix you "Unknown Baseband" but it may... I am not sure.
Finally, if you have ever made a previous backup, and still have it, if you restore from that your Baseband should re-appear and the error should fix itself. (I just figured you tried this already)
I once got the Unknown Baseband and IMEI - null issue, you could try to flash the stock Modem.img file for your phone, and try an IMEI injector program using the IMEI number in the battery compartment (Under the physical battery) But to fix mine I ended up calling the Customer Service and they eventually pushed an update file to my phone. I assume it was a Modem update of some sort, but it was a long time ago so I honestly don't remember.
I wish you good luck, as I know how frustrating these situations are. And keep in mind, I am only trying to help.
Please, to anyone experiencing the "Unknown Baseband Version" issue, focus on that before anything else, as you will most likely worsen your problem the more you do with the issue persisting.
Click to expand...
Click to collapse
Up until this point, I've only had the phone stock with the OTA updates from Verizon. It was updated the day I got the phone, so the baseband must be official, even if not supported by CyanogenMod. I wanna say it's 23B. I tried everything to get fastboot to work. I'm using the original cable that came with the phone "LG Electronics DC1501" plugged directly into a USB 2.0 port on my motherboard. If fastboot doesn't work, I can't flash imgs. An OS doesn't exist. I don't have a versatile recovery (Cyanogen Recovery might as well be stock). You say there's a chance TOT method will erase my IMEI, but you say there is an IMEI injector that can restore it, correct?
At this point, I'm at a loss. I really don't know what else can be done. I'm going to give the TOT method a shot. The website you linked has been suspended, so I'm following the 2015 updated method here: http://forum.xda-developers.com/showthread.php?t=2432476
---------- Post added at 09:09 AM ---------- Previous post was at 08:37 AM ----------
Knux Kitsune said:
Up until this point, I've only had the phone stock with the OTA updates from Verizon. It was updated the day I got the phone, so the baseband must be official, even if not supported by CyanogenMod. I wanna say it's 23B. I tried everything to get fastboot to work. I'm using the original cable that came with the phone "LG Electronics DC1501" plugged directly into a USB 2.0 port on my motherboard. If fastboot doesn't work, I can't flash imgs. An OS doesn't exist. I don't have a versatile recovery (Cyanogen Recovery might as well be stock). You say there's a chance TOT method will erase my IMEI, but you say there is an IMEI injector that can restore it, correct?
At this point, I'm at a loss. I really don't know what else can be done. I'm going to give the TOT method a shot. The website you linked has been suspended, so I'm following the 2015 updated method here: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
OMG! It worked! My phone's still activated, so no problems with IMEI. I may be coming on kinda strong, but I LOVE YOU! I spent several hours yesterday, and I've been stressing about it ever since. I even put in a repair request with LG...now I can cancel that request. Thank you thank you thank you!
Knux Kitsune said:
OMG! It worked! My phone's still activated, so no problems with IMEI. I may be coming on kinda strong, but I LOVE YOU! I spent several hours yesterday, and I've been stressing about it ever since. I even put in a repair request with LG...now I can cancel that request. Thank you thank you thank you!
Click to expand...
Click to collapse
@Knux Kitsune Haha I'm glad that you finally got it working, I apologize about the problem with the link... I think I messed up all of the links in my response I'll fix those for the future. But again I'm just glad you got it working with no more problems, thanks for being so patient, XDA is like the best forum out there IMO.
Also, just curious, if you don't mind responding.. I was just wondering, did you use the KDZ method from the link you posted? Just want to know so that I know how many solutions there are for problems like these.
Anyway, enjoy your "new" phone lol, and be careful in the future because I know how painful these situations can be!
Glad you got it fixed!
:good::good:
Edit: The LGFlashTool link literally just got it's domain suspended like minutes after I posted it.. quite ironic.
Williquah said:
@Knux Kitsune Haha I'm glad that you finally got it working, I apologize about the problem with the link... I think I messed up all of the links in my response I'll fix those for the future. But again I'm just glad you got it working with no more problems, thanks for being so patient, XDA is like the best forum out there IMO.
Also, just curious, if you don't mind responding.. I was just wondering, did you use the KDZ method from the link you posted? Just want to know so that I know how many solutions there are for problems like these.
Anyway, enjoy your "new" phone lol, and be careful in the future because I know how painful these situations can be!
Glad you got it fixed!
:good::good:
Edit: The LGFlashTool link literally just got it's domain suspended like minutes after I posted it.. quite ironic.
Click to expand...
Click to collapse
I actually downloaded the KDZ, but I used the TOT method. I actually almost did it again, because in KitKat, my connection was very unstable, I did install the 35B baseband from XDABBEB, but that didn't fix the problem. I tried updating the firmware legitimately via LG Upgrade Assistant Utility (Verizon), but it kept giving an error everytime it got to 20%. I found no support online to get past this error, so I looked into stock ROMs and found XDABBEB (again) had built a flashable stock ROM for my phone, identical to what Verizon released last month, but with root access. I flashed TWRP 3.0 with Flashify, then flashed the ROM. The first time I flashed it, the phone showed that the phone service had stopped responding, a dialog box that only comes up once per cycle...super annoying. I managed to get back into Flashify and attempted installing the ROM again. I was actually prepared to do another TOT flash if it still had issues, but the second time wiping and flashing worked. My connection is solid, and I've had no errors (so far). It seems to run faster on Marshmallow than it did on Lollipop. It's pretty much the end result I was going for when I tried upgrading some 35 hours ago.
Update: Apparently, my baseband is fixed now. It did say Unknown before, even after flashing the 35B baseband from XDABBEB (initially anyways, reflashed after wipe just before flashing the ROM), but now it says "VS985-MPSS.DI.2.0.1.c1.13.4-00005-M8974AAAAANPZM-1"....so that's...good?
*Solution*
Knux Kitsune said:
I actually downloaded the KDZ, but I used the TOT method. I actually almost did it again, because in KitKat, my connection was very unstable, I did install the 35B baseband from XDABBEB, but that didn't fix the problem. I tried updating the firmware legitimately via LG Upgrade Assistant Utility (Verizon), but it kept giving an error everytime it got to 20%. I found no support online to get past this error, so I looked into stock ROMs and found XDABBEB (again) had built a flashable stock ROM for my phone, identical to what Verizon released last month, but with root access. I flashed TWRP 3.0 with Flashify, then flashed the ROM. The first time I flashed it, the phone showed that the phone service had stopped responding, a dialog box that only comes up once per cycle...super annoying. I managed to get back into Flashify and attempted installing the ROM again. I was actually prepared to do another TOT flash if it still had issues, but the second time wiping and flashing worked. My connection is solid, and I've had no errors (so far). It seems to run faster on Marshmallow than it did on Lollipop. It's pretty much the end result I was going for when I tried upgrading some 35 hours ago.
Update: Apparently, my baseband is fixed now. It did say Unknown before, even after flashing the 35B baseband from XDABBEB (initially anyways, reflashed after wipe just before flashing the ROM), but now it says "VS985-MPSS.DI.2.0.1.c1.13.4-00005-M8974AAAAANPZM-1"....so that's...good?
Click to expand...
Click to collapse
Awesome, well that's good that you eventually reached your goal. I can't say for sure why your connection was unstable on the Stock Kit Kat, but the 35B baseband is for 35B (5.1.1) Lollipop. The TOT method flashes back Stock Firmware, which is 10B (I believe 4.2.2) - KitKat so you would then need the Stock Modem IMG: (10B Modem File) but you are past that.. which is great. The Phone Service not responding is, I'm sure, a result of the incompatible 35B Modem mixing with 10B (4.2.2) Software Version. That's why flashing XDABBEB's Stock ROM fixed it (at least the second time around), because it includes all the stock IMGs, including the stock Baseband Version (10B).
But I'm so glad that you re-flashed and wiped again, because you have literally managed to return it to complete stock. Your baseband is official, and seems to me.. completely fixed!
Just confused with this:
It seems to run faster on Marshmallow than it did on Lollipop.
Click to expand...
Click to collapse
Are you running Marshmallow now? Or Kit Kat? I think I just lost you at some point haha.
But congrats on fully flipping your situation around! And in fact, because you fixed your Baseband issue, this thread is now completely answered! :good:
The TOT Method does wonders, doesn't it :victory:
Sorry, the stock ROM I used is http://forum.xda-developers.com/ver...t/vs985-46a-stock-flashable-firmware-t3304365
It's identical to what Verizon sent out last month except it is rooted, which I don't know why phone providers are so against letting their customers have full access to phones they either own or are leasing. I own this phone. It's paid in full. I want root access... Anyways, yes, it's Marshmallow.
Knux Kitsune said:
Sorry, the stock ROM I used is http://forum.xda-developers.com/ver...t/vs985-46a-stock-flashable-firmware-t3304365
It's identical to what Verizon sent out last month except it is rooted, which I don't know why phone providers are so against letting their customers have full access to phones they either own or are leasing. I own this phone. It's paid in full. I want root access... Anyways, yes, it's Marshmallow.
Click to expand...
Click to collapse
Ohhh, I see. I totally agree with you, it really makes no sense... the phone was built a certain way, it was meant to be used like that. Why the providers "nerf" them, I don't know. Even with the FM radio, they disable the receiver on the phones, I assume so that we are forced to stream instead, and they make more money. It's absolute sh**. But yeah, alright well that's cool, I might have to flash that myself actually, Marshmallow is lookin' really nice, as long as the battery life ain't too bad I'm gonna test it out myself!
Excuse me, first i´m sorry for my bad english language. I have same problem the unsupported baseband, but till now i just feel confused. I flash the Resurrection Remix Nougat on twrp and says unsupported baseband error. What should i do first? Flash the new baseband? If it yes, which baseband version is suitable for my device. Im using LG d855 and running android 6. Or i must unlock bootloader before flashing the new ROM? Thankyou, hope anyone will answer my stupid question.
I am using micromax q372 smartphone, had an android 5.0 stock ROM, and now i have installed resurrection remix 5.5.9, and my DEVICE OFFICIALY DOESN'T SUPPORT, and I garbed all of my luck and installed it, and now I have a fully working custom ROM on a unsupported device, the only problem I had was with the data connection, and I sorted it out, now everything is working, .............now I want to install resurrection remix 5.9.X , and my device doesn't is not on the support list, so ....can I do it , without any bugs? .......plz advice me
Hello, I recently tried to root my device, I succeed in doing so but it was systemless root, I didn't know anything at the time so I tried different versions of supersu, now my phone won't boot, only fastboot and recovery works,
I visited a thread https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
but I don't know which one is my stock and I'm afraid to mess it up even more,
image uploaderG]
Can you please advise me how to recover my basic stock system :F
I remember that my installed android before it stopped working was 6.01 afaik
Your Stock is 6.12.111.4
option 1:
TWRP backup - https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
on post #3
Make sure to use TWRP 3.x.x.x not your current one as it seems you use the outdated version.
option 2 :
RUU - https://www.androidfilehost.com/?fid=24399965296001026
follow this guide but use the above RUU - https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Thank you, my TWRP is the latest one now because my system sort of worked when I first rooted it but when I noticed that it's systemless I tried to flash system one and my phone didn't work as intended (couldn't download things on it and some other things didn't work) that's when I flashed newest twrp and newest super su and factory reset stopped working as of now and it's stuck on bootloop. Downloading that recovery, wish me luck .
Edit: it works now, thanks
One additional issue arose - my folders seem to be really wrecked, can't download anything from updates to system apps to downloading apps from playstore and even downloading apps regularly, when I made sd card my internal card I was able to download opera and wanted to select default download folder but couldn't pick any/make any and the folders were not recognizable for me (no data folder for example)
edit 2: I probably fuked up permissions too last time, fix context in twrp seems to have fixed the issue
Radenz said:
that's when I flashed newest twrp and newest super su and factory reset stopped working as of now and it's stuck on bootloop.
Click to expand...
Click to collapse
Couple words to the wise:
1) Always state exact versions numbers (TWRP, SuperSU, etc.) instead of just saying it the "latest". I've seen a lot of cases, where folks ensure us they are on the "latest" and it turns out when prompted for the actual version number, they are using something from 2 years ago!
In general when posting here, it's always best to give as much detail and specific info as possible. Vague descriptions, lack of details, and assumptions are always going to hinder more than help.
2) Always make a TWRP backup of your stock ROM before doing any mods like root or custom ROM. As you now see why, things don't always go as intended. Luckily, ckpv5 maintains a collection of stock backups. But you should already know how to revert to stock and be equipped to do so, before doing the mods. Not waiting for that "panic" moment when you need it, and can't figure it out.
I'm surprised how many folks here jump into rooting, flashing custom ROMs without leaving themselves an "escape plan" of knowing how to get back to stock. Maybe it's just my personality, but I can't fathom doing any of these things without knowing beforehand how to fix them, restore stock, etc.
Thanks for advice, to be honest 3 days ago I didn't know what rooting was and searched for "root htc one m8" and got it done by a site from 2014 with a multitool that had outdated soft. What I lacked then was big red uppercase notice how to do backup because most first time rootings end up badly.
Radenz said:
Thanks for advice, to be honest 3 days ago I didn't know what rooting was and searched for "root htc one m8" and got it done by a site from 2014 with a multitool that had outdated soft. What I lacked then was big red uppercase notice how to do backup because most first time rootings end up badly.
Click to expand...
Click to collapse
Yeah, completely understand if you are new to this; and we all had to start somewhere, at some time. Consider it lessons learned for next time.
A lot of folks skip the step of making a backup (before root, etc.). And also a lot of guides, YouTube tutorials, etc. neglect this step (which is something I cannot understand). So it's an honest mistake, and I'm definitely not saying that it's your fault that it wasn't done.