Related
Unofficial LineageOS 13 (Android Marshmallow) for JBBL dated March 18, 2017 from the 4PDA forums courtesy of developer ilichva!
Again, this is only for JBBL. Flash at your own risk and please do a nandroid backup prior to doing so!
All credits and thanks go to the original developer ilichva!
____________________________________________
Latest Build - LineageOS 13:
lineage-13.0-20170318-port-ilichva-xt907_jbbl.zip (405.4 MB)
Mega
SolidFiles
PCloud
MD5 :: 63FB23666399844E5BB7A8D9C347374D
____________________________________________
Prior Build - CM13:
cm-13.0-20161205-ilichva-xt907_jbb.zip (411.9 MB)
Original Link
Mega
SolidFiles
PCloud
MD5 :: 3c786a57929d024010a0fce36287ea7d
____________________________________________
NOTE: If you are on KitKat Bootloader (KKBL), you will need to revert to the JellyBean Bootloader (JBBL) before you can flash this ROM. Instructions on how to do so may be found here and here and here
____________________________________________
Latest TWRP 3.0.2 recovery by ilichva may be found/downloaded here
Updated to 03.25.2016 build
Hallo Rahimali
Thanks for the share. I have tried this and apparently works ok. I'm unable to get WiFi working. Tried different gapps but there are force close issues. Any recommended gapps versions available?
Opengapps usually does the job. Flashing gapps with marshmallow is different than with prior android versions. With MM you have to flash gapps immediately after you flash the ROM (before booting up the ROM for the first time). Try and see if that resolves your FC issues
Updated to April 02, 2016 build!
I managed to get the force close issues resolved. Everything works fine except Wifi. I am unable to enable wifi as the button is greyed out. I tried enabling wifi from terminal using svc wifi enable, it enabled the button but wouldnt detect any available wireless networks. Any fixes for this?
Updated to April 05, 2016 build!
ultrasoniic said:
I managed to get the force close issues resolved. Everything works fine except Wifi. I am unable to enable wifi as the button is greyed out. I tried enabling wifi from terminal using svc wifi enable, it enabled the button but wouldnt detect any available wireless networks. Any fixes for this?
Click to expand...
Click to collapse
Sorry no idea. Nobody is complaining in the 4pda forums about any WiFi issues. Did you do a clean flash? Maybe the developer, @ilichva can help?
bootloader and recovery
My XT907 is showing that my bootloader is "0x109B" and I am unsure what version of TWRP supports 6.0.1 (currently running 2.8.6.0)
Can anyone verify their settings and let me know?
I am running CM12.1 currently, so I should be able to dirty flash correct?
Thanks guys!
KKBL?
Anyone know of a marshmallow based rom that works with the kitkat bootloader for this device?
crzypcdude said:
Anyone know of a marshmallow based rom that works with the kitkat bootloader for this device?
Click to expand...
Click to collapse
Marshmallow not yet available on KKBL
rahimali said:
Marshmallow not yet available on KKBL
Click to expand...
Click to collapse
Are there any significant reasons to stay on the KitKat bootloader? Otherwise I'll just downgrade now that I'm rooted with an unlocked bootloader.
One of the most compelling reasons to stick with the KKBL would be the availability of the 3.4x kernel as opposed to the 3.0x kernel on the JBBL but feel free make your own decision. I was on the JBBL (by choice) for a considerable length of time without any apparent side effects...
Would you mind adding dates to post #1?
Any updatefor this rom?
crzypcdude said:
Would you mind adding dates to post #1?
Click to expand...
Click to collapse
The dates are already present in post #1 as well as in the filenames.
dedik46 said:
Any updatefor this rom?
Click to expand...
Click to collapse
Updated!
Are all the builds being updated in the 4PDA post linked in #1 as well as TWRP builds?
crzypcdude said:
Are all the builds being updated in the 4PDA post linked in #1 as well as TWRP builds?
Click to expand...
Click to collapse
That is correct.
Confirmed Working!
Can confirm this works, flashed the recovery included in the 4pda post, used it to flash the rom, gapps, and supersu. Initially booted up in Russian, but after waiting for 30 seconds or so, switched to English on its own. Setup was flawless after that, no issues to report as of now. Anyone that needs help installing the rom or downgrading from kitkat to jellybean just message me.
I thought I was the only one that ended up with default language in Russian... All the previous builds defaulted to English on install... Also when I downloaded the latest update it downloaded on my phone as a .bin not a .zip I checked the file size and contents vs what is online (after changing the extension to .zip) and everything seemed to be Ok so I installed and been up and running on latest version for 24 hours....
Had a few FC's in the beginning while changing the language to English (I have a feeling that some of my already installed apk's caused the issue) . I did do a test run before restoring my stuff and didn't have any issues during initial setup and the phone auto corrected language based off sim during initial setup.
Haven't gotten a chance to fully test this build, but I know that the issue that I was having with the native tethering soft rebooting the phone every couple of hours when active is gone! After a few more days of messing with it I will post any other issues that I come across
Sent from my Moto Razr M on cm13 4-16-16 using XDA Free mobile app
Any clue about why I'm getting error 7 while finishing the last steps of the ROM flashing procedure?
Stock ROM Elephone P90000_Android_6.0_20160401 (Beta)
Download - https://mega.nz/#!w4BBnKaR!_WU3BeucmEURhgo8VpvspHMVZngL7ctzd29mx6cn2BQ
XDA:DevDB Information
[ROM] Stock ROM Elephone P9000_Android_6.0_20160401_Beta, ROM for the Elephone P9000
Contributors
Jonny
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 20160401
Beta Release Date: 2016-04-04
Created 2016-04-19
Last Updated 2016-04-19
Has someone give this Beta a try?
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
ultramag69 said:
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
Click to expand...
Click to collapse
Untick the userdata.img if you don't want your data to be wiped.
racer290 said:
Has someone give this Beta a try?
Click to expand...
Click to collapse
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Jonny said:
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Click to expand...
Click to collapse
Correction, someone has already posted the method here >>> http://forum.xda-developers.com/elephone-p9000/how-to/how-to-root-elephone-9000-stock-rom-t3359315
The tutorial in the link above works for this firmware version as well.... could have saved myself a lot of time if I'd read that first lol. For convenience I've put all the files needed in a zip file (link below). Just use SP Flash Tool to flash the recovery, then flash the 2 other zip files from TWRP
ZIP File >>> https://mega.nz/#!IlgxgDhS!r6_OpFYLVv07o025ecJ9rDul2db1KMsoWAlZbabWMxI
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Where do you get these ROMS from? I'm looking for rom version 20160318 for the p9000 lite.
karl0ss said:
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Click to expand...
Click to collapse
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
megthebest said:
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
Click to expand...
Click to collapse
I could only get 5.1604 working, 5.1612 wouldn't work for me at all on Windows 10 in VirtualBox.
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Bradco said:
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Click to expand...
Click to collapse
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
megthebest said:
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
Click to expand...
Click to collapse
Ok thanks
it was funny how I realized mine was the new version now
I made this thread here so you guys can discuss, this is for information to others who have gotten the new elephone
1) How do we get root ?
No, there isnt any proper recovery last @Emileh ported it did not work very well you are able to flash it the recovery but you are unable to boot back into the system it just stuck at the elephone logo.
2) as of now we only have one rom that has been up here and running K06TE-A.A.vR14.E1.160707 (2016 Version)
K05TS-A.A.vR1E.E2.160217 (2015 Version)
3) cosmetic mixed up (happens alot on chinese phone)
my front is the old 2015 version cover but my back is the new fingerprint cover (possible you can confirm with that is the new elephone you have if you are not sure.
4) so no root and no cyanogenmod and no recovery ?
as of now Im not sure about root, cause I did tried to flash recovery from @Emileh but I could not boot back to android os, so we cant flash supersu,
kingroot and others dont work !
also there some memory layout changed, so it will render the android 5.1 roms useless, please dont try unless you know what you are doing and know how to recover from mediatek usb port
5) will CyanogenMod 13 work ?
to be honest we need a fully working recovery.
maybe there can explain and clear anything more that I left out, I have just gotten the phone
@skeleton1911 @BlueFlame4 @Emileh @Deepflex
somehelp would be nice. thanks would be nice to get cm13 for both the 2015 and 2016 working
Hey,
well the 2015 and 2016 versions are basically two different devices - despite having the same name they share very little. A unified CM 13 build is thus not only difficult to establish but I would even say that it makes things more complex than developing two single versions. That said, CM 13 for the 2016 should be rather easy to bring up because it ships with 6.0. Basically you could take Deepflex's P9000 tree, change it according to the 2016_P8000 and boom - should work. With that you can then of course also compile a working recovery to achieve root That's the theory at least
Is that so but we have yet to achive root and figure out what is the internal changes between those two? Maybe @Deepflux can lend a helping hand in this wish you could help out @BlueFlame4, cause I finally had the money to get this phone possible if you could look into the recovery issue on why it does not boot after flashing it aka bootloop at elephone logo
** Attempted to Port and it does not work. did repack twice.
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Emileh said:
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Click to expand...
Click to collapse
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Zenns said:
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Click to expand...
Click to collapse
I was talking about this. You have to adapt it to the P8000 and have to use a 3.18 kernel (+ M blobs) though.
there isnt any 3.18 kernel that was released right ? m blobs can be extracted question is why won't your cm13.1 work on the new elephone ? memory changes ? it is still same soc right or there is something different quite confused.
Bump
Hi and sorry for the potential newb post
Been using CM / Lineage for years and never come across an individual firmware upgrade requirement until now.
I am on Lineage nightly Feb 8th and cant go any further due to:
comparing tz version TZ.BF4.0.1-83199 to tz.bf.4.0.1-76917
assert failed: oppo.verify_trustzone("TZ.BF.4.0.1-81399") == "1"
updater process ended with ERROR: 7 error installing zip file
I have the working 1+3 TWRP installed so Is it possible to upgrade the firmware only?
Or do I have to wipe and install the latest OOS then go back to Lineage?
I downloaded OOS 41 and there is a firmware folder in there with a few bin / mbn files so kinda hoping I can somehow flash just the firmware and keep my build.
Appreciate any help....
Cheers
Gaz
Here is the latest firmware (4.0.3). Download firmware + modem and flash in TWRP before LineageOS.
Spot on - thanks Fam im sorted
Familotel said:
Here is the latest firmware (4.0.3). Download firmware + modem and flash in TWRP before LineageOS.
Click to expand...
Click to collapse
great work!thanks
Familotel said:
Here is the latest firmware (4.0.3). Download firmware + modem and flash in TWRP before LineageOS.
Click to expand...
Click to collapse
Hey there, sorry to bug you guys. Unfortunately I'm noob so I can't comment on the main LOS thread, but I have an issue that hopefully someone can help with. Originally on CM14 nightlies, without any dramas, obviously with the change from CM on LOS I've flashed the experimental build, then the LOS nightly to get started, all went fine until the change to unified requiring the firmware update. I've installed 2nd March nightly (by editing the file to ignore the trustzone version) in case it was that, but no seems not.
I've flashed the latest FW as mentioned, and the Baseband version is M8996FAAAANAQM-1.85373.1.86546.1 so it appears I'm running definitely running the latest FW (and there were no errors on install) I then reboot to system, download the latest nightly and go to install - still getting the TZ.BF.4.0.1-83199 to TZ.BF.4.0.1-85373 error.... Have I missed a step somewhere? or is this blindingly obvious and I'm a muppet?
Any helps appreciated! cheers
Same issue with the same parameters!
Z-master said:
Hey there, sorry to bug you guys. Unfortunately I'm noob so I can't comment on the main LOS thread, but I have an issue that hopefully someone can help with. Originally on CM14 nightlies, without any dramas, obviously with the change from CM on LOS I've flashed the experimental build, then the LOS nightly to get started, all went fine until the change to unified requiring the firmware update. I've installed 2nd March nightly (by editing the file to ignore the trustzone version) in case it was that, but no seems not.
I've flashed the latest FW as mentioned, and the Baseband version is M8996FAAAANAQM-1.85373.1.86546.1 so it appears I'm running definitely running the latest FW (and there were no errors on install) I then reboot to system, download the latest nightly and go to install - still getting the TZ.BF.4.0.1-83199 to TZ.BF.4.0.1-85373 error.... Have I missed a step somewhere? or is this blindingly obvious and I'm a muppet?
Any helps appreciated! cheers
Click to expand...
Click to collapse
Hi, I have the exact same issue. I've flashed the firmware to 4.0.3 and successfully installed the nightly from 08/02/2017. Now when I try to flash the nightly from 09/03/2017 I get this issue again! This time nothing helps so far.
Please, if you find a solution - let me know!
devianity said:
Hi, I have the exact same issue. I've flashed the firmware to 4.0.3 and successfully installed the nightly from 08/02/2017. Now when I try to flash the nightly from 09/03/2017 I get this issue again! This time nothing helps so far.
Please, if you find a solution - let me know!
Click to expand...
Click to collapse
Install the firmware from the Open Beta here:
https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
Yeah i had the same issue - open beta 12 is required for the 9th Mar build
Alright guys, the developer behind the CM ROM M6 has officially ported it for HTC One E9plus! Please find the details below for more info. I've also included screenshot that the developer himself said so.
[CM][ROM][MT6795][64bit] CyanogenMod For MTK mt6795 & Kernel 3.10.++
Last CM ROM Based
Changelogs :
CyanogenMod - Android 6.0.1_r74 - 2016/12/19
TESTED AND WORKING GOOD (STABE) :
Audio
Data Connection
Dual SIM
Camera
FM
Gapps
HotSpot
Mic
RIL
Screen Recording
SMS
Storage
USSD
WiFi
GPS
Bugs :
IR Sensors
FM (will fixed on the next build)
ROM LINK :
http://www.docroid.tk/2016/12/CM-For-MTK-mt6795.html?m=1
I'm a bit confused - is it ready for flashing or it needs to be ported for our device?
vanshee said:
I'm a bit confused - is it ready for flashing or it needs to be ported for our device?
Click to expand...
Click to collapse
I'm sorry that i didn't make it clear enough, and yes it's ready to be flashed on HTC One E9plus. Just download the ROM and Gapps from the link above(developer site) and flash them from twrp(make sure to do the necessary reset) and you're done.
Ok, thanks. Will try when I get home. Hope at least battery life is better, because it's terrible in LP.
Edit: everything installs successfuly, but I'm getting bootloop.
Another edit: Managed to bypass error 7 in TWRP but my phone still bootloops. Tried to RUU it then install fresh cm, but still no go. I wonder how anyone else managed to run theirs.
Actually, did anyone flashed this and confirmed it is working? Normally there would be a swarm of posts and screenshots of people saying what's working and what's not. But here - with a working CM port of MM for our device the result is a dead silence. It's like no one ever tried to install it.
By the lack of responses i get that it's like when the op created the thread with the screenshot of the dev that is now removed - the dev said: you just need to port it. As no one reported by now that the rom is booting and working i get it that it is not ported or no one is willing to share. I tried it, got error 7 in twrp, managed to avoid it, rom installs, gapps installs and yet i get bootloop. Yes i know - i cleaned everything and did a factory reset. Also did a GPS lock prior to install all this in order to get GPS working in AOSP rom as it used to be in the past. None of this worked. Then i did a RUU. Returned to complete stock. Tried with and without root. Nothing. Everything installs but it ends up in bootloop. Never had such issues on any other phone. I'm not a dev or a coder or anything, but i'm very familiar with all this tinkering with roms, mods, xposed and any other stuff. By my minimal knowledge the rom is not ported for our device. I might be wrong - i'm a simple user, but unless a couple of people show screenshots of this rom up and running i'm giving up of using my only phone as a guinea pig. End of rant. My apologies if my words are a bit harsh. Have a great day people.
I can try to port for our device... I've found a guide!!!
DelsaDj said:
I can try to port for our device... I've found a guide!!!
Click to expand...
Click to collapse
That would be awesome. I wish i was into porting and coding but sadly i'm not. Take your time mate, we're not in hurry. It just need to work. Thanks in advance for your effort.
we are all waiting for your good Job.
i am not disappointed yet.
Thanks alot
any news here? or our phone is dead?
the host of the ROM is down, can someone provide a new one?
dude127 said:
ROM LINK :
http://www.docroid.tk/2016/12/CM-For-MTK-mt6795.html?m=1
Click to expand...
Click to collapse
this firmware will go to HTC One E9PLUS dual sim ? the link is not available, please update!
Spoiler: info
Telephone
Code Name: MT6795
Model: HTC One E9PLUS dual sim
Loader version: 1.01.0000
CID: 11111111
MID: 0PJX10000
Radio: 1.1506V24P22T34.2103.0805_AD5W
Firmware: A55ML_DTUL_L50_SENSE70
Learn more about the phone
Security Flag: S-OFF
Bootloader: LOCKED
Recovery: TWRP 3.2.3-0-840f04f7
SuperUser: SuperSU v2.82.1
BusyBox: BusyBox v1.29.2-Stericson
Kernel: Linux version 3.10.61-ge4676d8
Learn more about the firmware
Android Version: 5.0.2
HTC Sense: 7.0
SDK Version: 21
Base: 1.45.401.2 CL664129 release-keys
Firmware Name: 1.45.401.2