[ROM][7.1.2][MONTHLY][OMS] LineageOS 14.1 Unofficial Builds - Lenovo A7000 ROMs, Kernels, Recoveries, & Other De

[ROM][7.1.2][MONTHLY][OMS] LineageOS 14.1 Unofficial Builds - Lenovo A7000 ROMs, Kernels, Recoveries, & Other De

Conserved post.
1) bean gapps are reported to not work properly.
2) Read the below posts for information about opengapps flashing.
3) How to fix YouTube :
3) YouTube fixed. No youtube problem in latest build now.
======================================
F.A.Q :
======================================
Q) Does this ROM support substratum?
A) Yes! The latest LOMS ( LOS with OMS) is fully compatible with substratum and OMS commits have been integrated into the ROM. Since substratum uses OMS, all the themes that need OMS will work on the LOMS build.
Q) Do older builds (non-LOMS) support substratum?
A) Yes. And no too. Some of the themes that need OMS commits won't work. However, the themes which have no OMS commit requirements, will work nicely in Legacy mode. Legacy mode gives you the ability to use some substratum themes, but you will need to reboot after applying any/each overlay to see effect. Hey! It's still better than no theme right?
Q) The ROM is stable enough. Why isn't it official?
A) Many reasons to answer this one lol.
1) @Rohan Taneja (OP) isn't very active with development now. He's busy with higher studies.
2) Compiling ROMs is a very tedious task. Not making it official gives us the freedom to make the builds whenever we want. In official, you have to maintain the builds and make one for the device whenever a new major/monthly update is introduced.
3) Our device. It is a MTK phone. MTK device is happily accepted as official device by almost no rom community.
4) Our choice. Deal with it.
(Please note it isn't just as easy as typing the word "official" in the thread title and build prop to make it official. Noobs please don't spam thread about this topic)
Q) (You think something else can be added here?)
A) (PM me ASAP to tell your suggestion. I'm open to PM's. And please don't send stupid PM's asking to accept friend requests and s-h-i-t like that)
(FAQ section is under construction. Check later for more)

Awesome bro,Another great ROM from you

latest opengapps arm64 not working it tells me to download arm only will it work?

asher234 said:
latest opengapps arm64 not working it tells me to download arm only will it work?
Click to expand...
Click to collapse
EDIT : Stick to beangapps till the time, I figure out a proper solution.

Rohan Taneja said:
It is due to some build.prop glitch. I have attached a fix. After flashing ROM, flash this Patch file and then flash opengapps
Click to expand...
Click to collapse
Video from the camera slows down, the sound behind the video
The mx player also plays with the brakes in hw +
I flash
Flash-memory file Lineage-14.1_buildprop
Later
Gaups okey
(But got a brick, a constant splash screen is not loaded further)
The curved arc is always constantly

derak1129 said:
Video from the camera slows down, the sound behind the video
The mx player also plays with the brakes in hw +
I flash
Flash-memory file Lineage-14.1_buildprop
Later
Gaups okey
(But got a brick, a constant splash screen is not loaded further)
The curved arc is always constantly
Click to expand...
Click to collapse
I have tested it on RR-N and made same changes for LineageOS-14.1. I had assumed it might, sorry if that is the case.
Flash Beangapps, if Opengapps are causing an issue
No need to flash the patch. I will make changes for future builds

Rohan Taneja said:
I have tested it on RR-N and made same changes for LineageOS-14.1. I had assumed it might, sorry if that is the case.
Flash Beangapps, if Opengapps are causing an issue
No need to flash the patch. I will make changes for future builds
Click to expand...
Click to collapse
beansgapps not working tested it earlier
what I did to have gapps is flash build.prop fix, flash opengapps, flash default build.prop

asher234 said:
beansgapps not working tested it earlier
what I did to have gapps is flash build.prop fix, flash opengapps, flash default build.prop
Click to expand...
Click to collapse
Yes it's another workaround for gapps, but it is just dirty hack for such an issue.
Declaring device architect as arm64 crashing the ROM is really weird part of the problem. It's only happening to LineageOS and based ROMs like ResurrectionRemix for our device.
Need to debug the build thoroughly for now.

Will it be official in future?

Jio works in this rom ?

anaandshailu said:
Will it be official in future?
Click to expand...
Click to collapse
LineageOS team would never support MTK in the meantime, even their project on Wileyfox's Spark has been officially discontinued.
Don't expect it to be official in near future
OFFICIAL is just a tag. Real Deal is the firmware, it should be good enough for daily users.
Abhignu said:
Jio works in this rom ?
Click to expand...
Click to collapse
Yes, tested myself

Hello! Can u add pls Engineer Mode to edit audio and mic values? Or it's not possible in android 7 on MTK chip's?
If this possible, add same pls in AospExtended ROM V4.2

Dumaxa said:
Hello! Can u add pls Engineer Mode to edit audio and mic values? Or it's not possible in android 7 on MTK chip's?
If this possible, add same pls in AospExtended ROM V4.2
Click to expand...
Click to collapse
Dude, engineering mode usually always exists in all ROMs. You can try to activate it using the dialer code... Google the code yourself. Don't be always dependent on us for links and stuff.

tanish2k09 said:
Dude, engineering mode usually always exists in all ROMs. You can try to activate it using the dialer code... Google the code yourself. Don't be always dependent on us for links and stuff.
Click to expand...
Click to collapse
I'm not a noob, i know that code *#*#3646633#*#*, try to insert them in [ROM] [7.1.2_r8] [OFFICIAL] [aio_row] AospExtended ROM V4.2 [OMS/DUI], and see "This rom seems to be dont have engineer mode".
That's why i'm writing that ****.
If you dont use engineer mode - i'm using it, rom which without that - not usable for me because i can't insert my volume and mic values. that because i'm asking about it.

led not working notification and black screen youtube

Thanks for the release!
Nightlies ?

which
Which gaps we will upload

haytham.toko said:
led not working notification and black screen youtube
Click to expand...
Click to collapse
I had to register on my cell's network manually before LED working...

hightech316 said:
I had to register on my cell's network manually before LED working...
Click to expand...
Click to collapse
How??

Related

[ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Broken:
Nothing.
Working:
Everything except 'broken' stuff
(see also second post for info on recurring questions)
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.
Builds are based off the Xiaomi's Android 7.0 firmware with proprietary blobs from MIUI 8.1.4 dev package.
Downloads:
Official download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (TWRP recovery for Mi 5 - Direct link)
Format /system, /data and /cache
Install LineageOS zip package
Install [optional] the LineageOS su addon to get root (there are obviously other root methods, but this is the recommended one as it survives to OTA updates)
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
Current minimal * required * firmware version is MIUI 8.1.4 Global dev, otherwise installation will fail. Download the latest dev fastboot package directly from Xiaomi and flash it prior to installing LineageOS or, alternatively, download and install one of the latest custom packages containing firmware only (at your own risk).
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Credits & collaborations:
This work is due to efforts from Mi5Devs founding members (@h2o64 and me) that did the full device bring-up. Huge thanks to @deovferreira for all the help during the kernel bring-up after source code dropped. Also thanks to @ValoXis for giving me the motivation I needed and to @shade.sh for compiling unofficial builds during the transition phase.
Finally, all LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Device wiki:
Official wiki link
Changelog:
LineageOS 14.1 weeklies changelog link
XDA:DevDB Information
LineageOS 14.1, ROM for the Xiaomi Mi 5
Contributors
bgcngm, Mi5Devs
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.18.x
Version Information
Status: Discontinued
Created 2016-11-17
Last Updated 2018-02-25

Some notes due to recurring questions:
Camera OIS can be recalibrated, if needed, with the following app: https://github.com/dobragab/Mi5CameraCalibrate.
Devices assembled with LGD panels may have less responsive hardware keys (recents and back) due to old touchscreen drivers released by Xiaomi. The workaround at the moment is to enable on-screen buttons and wait for more updated drivers in the next kernel source code release.
QC3.0 is not fully working and will be fixed when the next kernel source code drops.

So soon we have got cm13 official and cm14 almost stable...
thanks bgcngm and Mi5Devs team...

There we go. Too late? Could be, but we got there, in the best way we could. Mi5Devs always leading.

nice to see cm 14 for mi5 well be getting my phone soon ....thanks for ur hard work

One important note again: this is the one and only official support thread for CM-14.1 development.

Nice . At last mi5 got CM14.1 .
Btw how about CM13 ?
Is it still got updated when this CM14.1 become Official ?

Once Mi 5 moves to CM-14.1 official nightlies, CM-13.0 nigthlies will stop. That's what happens with all CM official devices.

Downloading and creating backups. As soon as i flash it, ill edit. Thanks for your work.

First of all a huge thanks to @bgcngm and mi5 devs for bringing cm-14.1 to mi5 and secondly about the camera broken stuff, are we using hal1 or hal3 camera, because when i checked the git for oneplus 3 they too had problems with hal3, hence they shifted back to hal1.

bgcngm said:
Once Mi 5 moves to CM-14.1 official nightlies, CM-13.0 nigthlies will stop. That's what happens with all CM official devices.
Click to expand...
Click to collapse
That means we'll get snapshot of cm13 ?

hope camera will be fixed soon, thats nice to have for daily use..

Vihru said:
hope camera will be fixed soon, thats nice to have for daily use..
Click to expand...
Click to collapse
Camera is working apparently, but with 3rd party apps. It's just Snap that is force closing, but should be fixed in CM sources soon enough.
Just a warning, only video recording is not working.

i had a post on CyanogenMod if anyone would do this i would really donate and you did im going to donate with 10$ For now, and i promise i will do so more and more when this keeps growing, and any tests needed or any work needed to be done to help you develop it more im available here for you.
Thank you man a lot for the work

bgcngm said:
Once Mi 5 moves to CM-14.1 official nightlies, CM-13.0 nigthlies will stop. That's what happens with all CM official devices.
Click to expand...
Click to collapse
Thanks ? ...I will install this rom when Cm14 theme engine will release.

7.0 or 7.1 gapps? Don't want to make a mistake.

Could someone upload it elsewhere? It's not feasible to download from mega.nz and I need to report bugs soon

contradriver said:
7.0 or 7.1 gapps? Don't want to make a mistake.
Click to expand...
Click to collapse
CM 14.1 -> Gapps 7.1
CM 14.0 -> Gapps 7.0

contradriver said:
7.0 or 7.1 gapps? Don't want to make a mistake.
Click to expand...
Click to collapse
I installed open gaaps arm64 7.1 and all is working good.

contradriver said:
7.0 or 7.1 gapps? Don't want to make a mistake.
Click to expand...
Click to collapse
CM 14.1 is Android 7.1

[ROM][7.1.1][NOUGAT][NIGHTLY] Official Mokee Open Source Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
About
MoKee OpenSource is based on the Cyanogenmod. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application: http://www.mfunz.com/en/developer-application, you can host your unofficial MoKee builds on our server!
Features:
(I will mention only that which does not take into CyanogenMod)
Listview animation
Interpolation anmação listview
Update over the air can download the download website only incremental, it helps lower faster update and upgrade more easily:
Some icons and own layouts
Manager for Google services, so no need to use a large gapps, you can only download necessary at MokeeCenter
Ringtones, Alarms, Notification, UI sounds are all different CyanogenMod, thus bringing a beautiful charm to rom
bootianimation own
information integrated into MokeeCenter
Settings to add speed data network
Settings for navigation bar
Settings for Statusbar
Intelligent control settings to configure the newer apps and others.
What is the difference?
RELEASE: Tested after integrating new features, more stable than NIGHTLY. (Odexed builds)
NIGHTLY: Built daily with newest code and experimental features, might contain undiscovered bugs. (Deodexded builds)
HISTORY: Final odexded builds once a newer Android version is out and being built.
EXPERIMENTAL: Released when a new device is added or when a new feature is added for public beta testing and feedback. (Deodexded builds)
UNOFFICIAL: Maintained separately by individual developers, usually involves modification of shared code which cannot be merged (affects other devices), therefore maintained by the developer himself.
Note: We always test the shared code for bugs, however sometimes we may not be able to detect device specific bugs. If you have such issues, it will be better to report to the device maintainer.
Downloads oficiais:
KIWI
GAPPS (Google Apps)
RELEASES = stables / no problems
NIGHTLYS = ???
Changelog:
HERE
Installation mode :
To install the clean rom:
Download the rom
enter the recovery
make all wipes (expect internal storage)
choose zip from SD and install
you can use a gapps any of its taste since it is for android 7.1.x
or you can go MokeeCenter after starting rom, there you can download the small gapps integrated into the system and have a lighter and clean rom.
To install upgrade:
Method 1:
just download the complete package via OTA
enter the recovery
only to wipe cache and dalvik (optional, I do not)
install the complete package downloaded via OTA
Method 2:
Download the complete package over the air and go to install update
let install automatically for you
Method 3:
Download only incremental updates
for that you need to donate 30 CNY for the team to release the feature on the device directly
But you can do this update without donation
just go on the site and click below build itself where it is written (upgrade: OTA to MK ...)
there will be the incremental free for you, this will save on your data package or in your spare time.
Big Thanks @martincz for development
Please DONATE if you like my work
Click on my signature for donation.
XDA:DevDB Information
Mokee Open Source , ROM for the Honor 5X
Contributors
[email protected], EsromG5
Source Code: https://github.com/MoKee
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: Cyanogenmod
Version Information
Status: Nightly
Beta Release Date: 2016-11-21
Created 2016-11-23
Last Updated 2017-02-28

Reserved

@[email protected] is this ROM has 100% working without powerhal bug that haunts CM device trees ?

methuselah said:
@[email protected] is this ROM has 100% working without powerhal bug that haunts CM device trees ?
Click to expand...
Click to collapse
Mokee is cm based so bugs are same as cm

I would like to tell you that CM device tress still does not http://forum.xda-developers.com/showpost.php?p=69556066&postcount=1372
have a read onto this. CM official maintainer says this.

Screenshots

xtapwhile said:
Screenshots
Click to expand...
Click to collapse
Well I will post them along with logs if this could be of any help !!!

No sim card detected, reboots every 2,3 min just like @jsbeyond one
But looks great !

Reboots within 2 mins..

@[email protected] do you want logs ?? I have them. Please let me know. I will PM you with a google drive link...

methuselah said:
@[email protected] do you want logs ?? I have them. Please let me know. I will PM you with a google drive link...
Click to expand...
Click to collapse
Pm

[email protected] said:
Pm
Click to expand...
Click to collapse
they are away.. check your PM buddy....

Wooowww. OP I hope you will be added to the developers list for Kiwi.
Sent from my honor 5X using XDA Labs

Nice to see an official build for 5x . As am too a flashaholic, I flashed it and found zero updates compared to crpalmer's kernel tree . All my alpha builds have the same issue .since this is an official one , we could expect some progress from his side too . I would thank for the official tag:highfive:

gopinaidu77 said:
Nice to see an official build for 5x . As am too a flashaholic, I flashed it and found zero updates compared to crpalmer's kernel tree . All my alpha builds have the same issue .since this is an official one , we could expect some progress from his side too . I would thank for the official tag:highfive:
Click to expand...
Click to collapse
I would like to see some official(or even just unofficial) stable builds from you man.
Sent from my honor 5X using XDA Labs

restarts and cant access camera...!!!1

Jithin0801 said:
restarts and cant access camera...!!!1
Click to expand...
Click to collapse
It's a cm based bug
Sent from my KIW-L24 using Tapatalk

Jithin0801 said:
restarts and cant access camera...!!!1
Click to expand...
Click to collapse
Lets wait for devs please
Sent from my Galaxy Tab 3 using XDA Labs

Jithin0801 said:
restarts and cant access camera...!!!1
Click to expand...
Click to collapse
Cm bug

[email protected] said:
Cm bug
Click to expand...
Click to collapse
Anything you could do about the issue. Something it shows in logs I provided .

[ROM][DISCONTINUED] LineageOS 15.1 for Xiaomi Mi 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Broken:
Nothing?
Working:
Camera (and flashlight)
WiFi
NFC
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
VoLTE
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.
Builds are based off the Xiaomi's Android 8.0 firmware with proprietary blobs from MIUI 8.5.10 dev package.
Downloads:
Official download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (TWRP recovery for Mi 5 - Direct link)
Format /system, /data and /cache
Install LineageOS zip package
Install [optional] the LineageOS su addon to get root (there are obviously other root methods, but this is the recommended one as it survives to OTA updates)
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
Current minimal * required * firmware version is MIUI 8.5.10 Global dev, otherwise installation will fail. Download the latest dev fastboot package directly from Xiaomi and flash it prior to installing LineageOS or, alternatively, download and install one of the latest custom packages containing firmware only - direct link (at your own risk).
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Credits & collaborations:
This work is due to efforts from Mi5Devs founding members (@h2o64 and me) that did the full device bring-up. Huge thanks to @deovferreira for all the help during the kernel bring-up after source code dropped. Last but not least, pleasure having @luca020400 and @LuK1337 onboard since the bring-up of the whole Xiaomi 8996 family, that lately did the major work in the O era.
Finally, all LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Device wiki:
Official wiki link
Changelog:
LineageOS 15.1 weeklies changelog link
XDA:DevDB Information
LineageOS 15.1, ROM for the Xiaomi Mi 5
Contributors
bgcngm, Mi5Devs
ROM OS Version: 8.1 Oreo
ROM Kernel: Linux 3.18.71
ROM Firmware Required: MIUI 8.5.10 dev
Version Information
Status: Nightly
Created 2017-09-07
Last Updated 2018-02-25

Keep in mind that for now this is just an alpha, take it like an early preview. Quite a lot hasn't yet been ported to Lineage, so please don't report issues like: "broken buttons backlight".

Unofficial Gapps here: https://www.androidfilehost.com/?fid=889764386195926952

so finally here

Amazing, Thank You for your effort

guys remember gapps 8.0 isn't proper once you install los and then install gapps and once the installer says installation complete do a force reboot

Finally Lineage OS 15 for Mi5 is up. I've been waiting for this eagerly since August. Thanks a lot devs. Great Effort. And please guys support our devs to give their best effort for our device. Hurray

didn't notice earlier amigo good job =)

amazing rom ! thanks for your work.
---------- Post added at 10:23 AM ---------- Previous post was at 10:18 AM ----------
so which fw should i flash ?

you made my day thanks Bruno! will wait for camera working though but really appreciated!!

Bianfuchen said:
so which fw should i flash ?
Click to expand...
Click to collapse
You must be really lazy to read... or blind maybe.

wow, so fast, waiting for next stable release soon. thank you anyway...

Finally, los 15 for our device landing.
Incredible work guys, good job.

bgcngm said:
You must be really lazy to read... or blind maybe.
Click to expand...
Click to collapse
Sorry if i am missing somewhere. but i can't find that buttons tab which is in los 14.1???

Plabon7 said:
Sorry if i am missing somewhere. but i can't find that buttons tab which is in los 14.1???
Click to expand...
Click to collapse
Read op post . Button feature isn't implemented yet

Oh really thanks man
We are wating for stable version . . .
But im going to test that and report you ?

and OTA updates will it be updated?
and OTA updates will it be updated?

mamay68rus said:
and OTA updates will it be updated?
Click to expand...
Click to collapse
There will be no OTA updates. I will release new builds when I think it's time to.

bgcngm said:
There will be no OTA updates. I will release new builds when I think it's time to.
Click to expand...
Click to collapse
When LOS 15 will become official, LOS 14 support will instantly end, right?

RootNightmareX said:
When LOS 15 will become official, LOS 14 support will instantly end, right?
Click to expand...
Click to collapse
That's how it always has been, once a device starts with official builds in a new branch, builds stop on the old one.

[ROM][9.0][OFFICIAL][XT16xx] OmniROM for Moto G4/Plus [Athene]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OmniROM 9.0
for
Motorola Moto G4/G4 Plus (athene)
This project is a feature-rich and official build of OmniROM 9.0 for Motorola Moto G4/G4 Plus (athene).
Its work is based upon the sources and tireless efforts provided by
the OmniROM Team and
@Nikit
@Lyuu
ofc me
About Omni
"Omni is a community-based project for the Android community which is Free^3: Free to Use, Free to Modify, Free to Share. The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality."
Since there are no official Android 9.0 builds provided by the OmniROM project anymore, I have continued to provide homemade builds with all ASB security patches applied.
DOWNLOAD:
Downloads for : Motorola Moto G4 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Old official downloads
DOWNLOAD: http://dl.omnirom.org/athene/
What's in
Bluetooth (with A2DP and AVRCP support)
WiFi 802.11a/b/g/n / Wifi Hotspot
GPS
RIL (GSM/WCDMA/LTE/VoLTE)
FM Radio
Gestures
Messaging: SMS/MMS/Email (Exchange ActiveSync support)
Multimedia: Audio/Video Playback, Images Gallery, Camera
Multimedia: Audio/Video recording (Camcorder), Voice Search
Omni Features, such as OmniSwitch and Performance Control
OmniStyle, Dark Theme, OmniWallpapers
OmniTheme support
Torch (OmniTorch)
Doze
Active Display
Night Light
Battery / Notification LED
Fingerprint sensor
CPU Deep Sleep support
Offline charging
Enforcing SELinux
Widevine DRM / Netflix
SafetyNet / Device Certification
MTP / USB File Transfer
What's not (yet)
Rear cam video recording (use Open Camera)
Torch quick tile
Sources
Device: https://github.com/omnirom/android_device_motorola_athene
Kernel: https://github.com/omnirom/android_kernel_motorola_msm8952
Vendor: https://github.com/DonkeyCoyote/proprietary_vendor_motorola/tree/android-9.0/athene
OmniROM: https://github.com/omnirom/android
Google Apps
Google Apps are not included within this package and have to be flashed seperately via TWRP.
OpenGApps Pico or Nano Package recommended. (arm)
Rooting
OmniROM does not come rooted out-of-the-box. If you think it's necessary to install a rootkit, you can use magisk to do that if needed. But don't expect to get support on issues related to the usage of rootkits.
Credits
@omnirom: OmniROM sources
@Nikit: Android O/P patches
@Lyuu: Android P patches
@rajatgupta1998: Dev support
Big THANKS also goes to the testers' support of the Athene Revivers tg group. Their effort and valueable feedback helped alot to iron out all G4 Plus related issues!
Just to mention: This is a 32 bit (arm) build, to stay close to official OEM release.
Last, but not least: Enjoy OmniROM!
PS:
Code:
#include <std_disclaimer_omni_athene.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications at YOUR OWN RISK.
*/
XDA:DevDB Information
OmniROM for Moto G4/Plus [Athene][XT16xx], ROM for the Moto G4 Plus
Contributors
golden-guy
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: AOSP
Version Information
Status: Nightly
Stable Release Date: 2018-12-02
Created 2018-12-02
Last Updated 2018-12-10

Please note that VOLTE support is not available yet. This will be added to Omni code base in the near future. Stay tuned!
VoLTE is working since 20181209 build.

Reserved

Editted!
golden-guy said:
OmniROM 9.0
for
Motorola Moto G4/G4 Plus (athene)
This project is a feature-rich and official build of OmniROM 9.0 for Motorola Moto G4/G4 Plus (athene).
Its work is based upon the sources and tireless efforts provided by
the OmniROM Team and
Great man! :good:
Click to expand...
Click to collapse

Sonu Sinha said:
Great man! :good:
Click to expand...
Click to collapse
Please don't quote the original thread !

DhirajKale789 said:
Please don't quote the original thread !
Click to expand...
Click to collapse
Sorry! Kind of new here!

wow! another pie rom ,going to install today.

Can anyone confirm volte works or not?

makash720 said:
Can anyone confirm volte works or not?
Click to expand...
Click to collapse
If it's not working under not working list then its probably working so just try yourself and let others know about it and not working provide a proper log to the dev.

makash720 said:
Can anyone confirm volte works or not?
Click to expand...
Click to collapse
Not yet, but will be added soon. Added a note in the second post now.

Is this Arm version like test build? Will there be an Arm64 version (as I saw this was partially based on Lyuu's work)? Anyways thanks for official builds!

rahulsj92 said:
Is this Arm version like test build? Will there be an Arm64 version (as I saw this was partially based on Lyuu's work)? Anyways thanks for official builds!
Click to expand...
Click to collapse
All developers pick some commits(changes) to make rom stable. This doesn't mean it is based on that one. Btw, this rom is fresh bringup by @golden-guy

theHari08 said:
All developers pick some commits(changes) to make rom stable. This doesn't mean it is based on that one. Btw, this rom is fresh bringup by @golden-guy
Click to expand...
Click to collapse
I'm sorry if this was in any way offensive. I know about cherry-picking some commits. I wondered if he had given her credit, so the ROM might've been Arm64. I now know it was not the case. I just wanna know if there'd be any Arm64 ROM.

rahulsj92 said:
I'm sorry if this was in any way offensive. I know about cherry-picking some commits. I wondered if he had given her credit, so the ROM might've been Arm64. I now know it was not the case. I just wanna know if there'd be any Arm64 ROM.
Click to expand...
Click to collapse
No wouldn't be. As per goldenguy the stock Moto roms are 32 bit and he is using 2gb varient.

rahulsj92 said:
I'm sorry if this was in any way offensive. I know about cherry-picking some commits. I wondered if he had given her credit, so the ROM might've been Arm64. I now know it was not the case. I just wanna know if there'd be any Arm64 ROM.
Click to expand...
Click to collapse
No. It's not offensive. I just need to tell that this rom is brought up by golden-guy from scratch.

hello,
have come to this ROM from Arrow.
This seems to work well - and importantly, works well with oneplus camera apk ( 32 bit ) to produce pics WITHOUT green pictures!
Only problem is I am having difficulty installing some apps from play store.
Yahoo Maill produces an error after install.
SO does Gmail - even if installed via Gapps.
Works fine on 64 bit Pie?
I am sorry if that is vague - maybe I am missing something easy about 32/64 builds?
I installied 32 bit Pico Gapps, and I have a moto g4 XT1622.
THis is the only Pie on which I can get a reliable camera.
Many thanks for all your work
pootler

pootler said:
hello,
have come to this ROM from Arrow.
This seems to work well - and importantly, works well with oneplus camera apk ( 32 bit ) to produce pics WITHOUT green pictures!
Only problem is I am having difficulty installing some apps from play store.
Yahoo Maill produces an error after install.
SO does Gmail - even if installed via Gapps.
Works fine on 64 bit Pie?
I am sorry if that is vague - maybe I am missing something easy about 32/64 builds?
I installied 32 bit Pico Gapps, and I have a moto g4 XT1622.
THis is the only Pie on which I can get a reliable camera.
Many thanks for all your work
pootler
Click to expand...
Click to collapse
Strange. Something simple as an email app should work just fine. Can you provide some logs, with Matlog? Restart phone, try either app, and then take logs.

Thanks :laugh:

Hello.
Some points I noticed on the 20181202 build:
On WhatsApp: if you try turning the flashlight on to record a video, the camera closes. If you try to take a picture, the same occurs.
[*]Both stock camera and Open Camera takes sometime to activate the camera. Clean Flash fixed the problem.
Google Lens can't access camera.
TurboPower is working flawless, if possible, please add this on the OP.
I'll wait until next build and re-check if problems were fixed. If not, I'll send some logs (can't do this now).

How smooth is it for athene?

[ROM][10.0][UNOFFICIAL] Pixel Experience+ [FINAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Motorola One [deen]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from MEGA
Donate
Liked my work? Give me a beer (PixelExperience head developer,not responsible of this build and not collaborating in it)
Do you like PE for Motorola One ? Contribute to make it better (DEVICE MAINTAINER)
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r40
Security patch level: July 2020
Build author/Device Maintainer: GitDaisy
Device Source code: Device Tree
Kernel Source code: Kernel Tree
Vendor Source code: Vendor Tree
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Credits: electimon for device tree's
orlando for vps
tys0n for support in both ways (donations and being good person for me)
XDA:DevDB Information
PixelExperience, ROM for the Motorola One
Contributors
GitDaisy
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: latest stock android 10 suggested
Based On: PixelExperience
Version Information
Status: Stable
Current Stable Version: 20200713
Stable Release Date: 2020-07-13
Created 2020-07-13
Last Updated 2020-07-17

Installation steps:
1. Download Rom
2. Download TWRP
3. fastboot getvar all
4. fastboot boot twrp
5. Do full wipe
6. Format Data
7. Flash ROM
8. Reboot to Bootloader
9. fastboot getvar all
10. If fastboot getvar all (current-slot label) from step 3 equals this from step 9 change the slot to opposite, if a then b if b then a, command is fastboot --set-active=SLOT
11. Boot to TWRP again
13. Flash Magisk (optional)
14. Reboot to system
Notes:
* DON'T flash Gapps (prebuilt)
* NEVER dirty flash from other ROM

The official Google camera is available in the Play Store and it is compatible to download it, but when you open the Google camera, it stops working. It is only compatible with the download but not when opening it. They would be so kind to fix that bug and have that camera like a Pixel phone on a Motorola One (deen)

Abel_Madrona_Antón said:
The official Google camera is available in the Play Store and it is compatible to download it, but when you open the Google camera, it stops working. It is only compatible with the download but not when opening it. They would be so kind to fix that bug and have that camera like a Pixel phone on a Motorola One (deen)
Click to expand...
Click to collapse
Google Camera v7.2 (latest possible) has been adden as prebuilt and working fine, full changelog below.
Google Camera
Pixel Live Wallpapers
Migrated to PixelExperience Plus (more features)
GPU Drivers Updated
Visit MEGA folder to download new version.

Not work "Moto Gestures" in Pixel Experience ROM
I have detected another error and in the System section in Settings, the "Moto Gestures" option does not work. When entering Moto Gestures it says it has stopped working, check it next update!

Abel_Madrona_Antón said:
I have detected another error and in the System section in Settings, the "Moto Gestures" option does not work. When entering Moto Gestures it says it has stopped working, check it next update!
Click to expand...
Click to collapse
Sorry for troubles but it's claimed as working, im using it. make sure you have latest stock firmware before flashing, this bug could occur when you are dirty flashing to same slot, clean flash to fix this. for dirty flashing you could try flashing to opposite slot. I won't share incremental OTA's because of it's problems with applying due to TWRP slot issue's (that's why you need to do this via fastboot). Meanwhile new update was released and WIFI speed issue has been decreased or even eliminated. it's date is 20200722. Already Uploaded.

i dont find twrp for motorola one nowhere
Can someone help me? I just wanted to be able to install my roms more easily because it depends on the computer and a rom with gsi installed is complicated

sweime said:
Can someone help me? I just wanted to be able to install my roms more easily because it depends on the computer and a rom with gsi installed is complicated
Click to expand...
Click to collapse
https://mega.nz/folder/DSxTiLqI#876sYC9w5M3glF_IGq5yPw

New Update is up !
Date: 2020-07-31
MEGA: https://mega.nz/folder/iS4w0QCZ#NlGKrGfmd4qcQlyfx6TVJA (2020-07-31)
AFH: https://www.androidfilehost.com/?w=files&flid=315640 (2020-07-31)
CHANGELOG:
~ Wifi Prima driver updated from CAF tag
~ Adden Wifi configs from stock
~ Configure wifi tcp buffersizes (wifi peformance)
~ Notch Cutout values applied from stock
~ Electronic Image Stabliization is now visible in GCAM
~ Force 4x MSAA is enabled by default
This was a try to fix graphical glitches.
to fix glitches enable Disable HW overlays
in Dev Options
~ Adreno Team Exclusive Thermals are adden
(Thanks to Adreno Team)
~ Fingerprint now passes ctsProfile by default
no need of Magisk Prop Config module
KERNEL CHANGES
~ Undervolt CPU by 20mV
~ CPU minimal frequency is now 307Mhz
~ Adden Simple GPU Algorithm
~ GPU maximum frequency is now 700Mhz 50Mhz up
~ GPU minimum frequency is now 133Mhz 50Mhz up
Use Kernel Manager to apply changes, some of them may be applied by default
Credits: @Electimon for device tree
all testers
all donators
all vps host's

Battery life
Hi, i just wanted to ask about battery life. Is it comparable to stock Android 10? I'm asking because i want to use PE on a daily basis and i know battery life on custom roms can suck haha. Anyways thank you for your work!

I'm planning on installing it tonight, so I'll comment here in a few days with an update and any bugs.

drunkgoth said:
Hi, i just wanted to ask about battery life. Is it comparable to stock Android 10? I'm asking because i want to use PE on a daily basis and i know battery life on custom roms can suck haha. Anyways thank you for your work!
Click to expand...
Click to collapse
It's way better than prev versions, it's not perfect yet. and i guess it's more likely PE+ and it's features related. It's depending on your usage, come to telegram group and ask

GitDaisy said:
PixelExperience for Motorola One [deen]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from MEGA
Donate
Liked my work? Give me a beer (PixelExperience head developer,not responsible of this build and not collaborating in it)
Do you like PE for Motorola One ? Contribute to make it better (DEVICE MAINTAINER)
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r40
Security patch level: July 2020
Build author/Device Maintainer: GitDaisy
Device Source code: Device Tree
Kernel Source code: Kernel Tree
Vendor Source code: Vendor Tree
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Credits: electimon for device tree's
orlando for vps
tys0n for support in both ways (donations and being good person for me)

XDA:DevDB Information
PixelExperience, ROM for the Motorola One
Contributors
GitDaisy
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: latest stock android 10 suggested
Based On: PixelExperience
Version Information
Status: Stable
Current Stable Version: 20200713
Stable Release Date: 2020-07-13
Created 2020-07-13
Last Updated 2020-07-17
Click to expand...
Click to collapse
Very good rom

Hi to everyone
Where I can download TRWP for make the installation? How I can install this TRWP?
Another question is, this rom is rooted? If not, How I can root?
Thanks for your answers

Hakets said:
Hi to everyone
Where I can download TRWP for make the installation? How I can install this TRWP?
Another question is, this rom is rooted? If not, How I can root?
Thanks for your answers
Click to expand...
Click to collapse
You can obtain twrp frome here https://mega.nz/folder/DSxTiLqI#876sYC9w5M3glF_IGq5yPw
Rom has no root by default, you can root it via magisk

GitDaisy said:
You can obtain twrp frome here https://mega.nz/folder/DSxTiLqI#876sYC9w5M3glF_IGq5yPw
Rom has no root by default, you can root it via magisk
Click to expand...
Click to collapse
Thanks, was done.
Another question: How you solve SafetyNet issues?

Hakets said:
Thanks, was done.
Another question: How you solve SafetyNet issues?
Click to expand...
Click to collapse
Enable Magisk Hide and you're good to go.

lucasdeeiroz said:
Enable Magisk Hide and you're good to go.
Click to expand...
Click to collapse
Thanks for advice, but until now I don't have success, Can you tell me please what configuration you used?

Hakets said:
Thanks for advice, but until now I don't have success, Can you tell me please what configuration you used?
Click to expand...
Click to collapse
In Magisk settings, hide Magisk (this will rebuild Magisk with random package id). Then enable Magisk Hide and select all sensitive apps (such as netbanking apps, Google Pay, etc. Google Play Services is selected by default). Reboot. All good.
Be aware that some modules can break device fingerprint and SafetyNet, tho.

lucasdeeiroz said:
In Magisk settings, hide Magisk (this will rebuild Magisk with random package id). Then enable Magisk Hide and select all sensitive apps (such as netbanking apps, Google Pay, etc. Google Play Services is selected by default). Reboot. All good.
Be aware that some modules can break device fingerprint and SafetyNet, tho.
Click to expand...
Click to collapse
Thanks @lucasdeeiroz

Develop Bugs

welcome