Related
Saw this article this morning. Thought I'd share it.
http://www.phonearena.com/news/Samsung-Galaxy-S-III-wireless-charging-kit-introduced-by-Zens_id32935
Won't be coming out until September, for about 85 USD, but at least there will be options.
Does anyone know how much the official one will cost?
Sent from my SPH-D700 using Tapatalk 2
anyone know how wireless charging compares to outlet powered charging as far as strength and charge time?
$85 to me just seems ridiculous for a wireless charger when the technology obviously doesn't cost nearly that much. I think even after these official setups come out that I will stick with the palm touchstone conversion if I decide I want to do wireless charging. Even if I mess something up I can buy and screw up 8 of those before I even get close to paying $85.
kmdtcs said:
$85 to me just seems ridiculous for a wireless charger when the technology obviously doesn't cost nearly that much. I think even after these official setups come out that I will stick with the palm touchstone conversion if I decide I want to do wireless charging. Even if I mess something up I can buy and screw up 8 of those before I even get close to paying $85.
Click to expand...
Click to collapse
I agree, the touchstone cost less, but with the touchstone charging rate is only 500mAh which has slow charging time.
I'll like to see the official one first.
The Qi standard offers a maximum of 1A in low power mode but a lot of the ICs on the market (TI) only support up to 500 mA. 500mA is about half of dedicated wall charging one I believe and the same as when you plug it into your PC to charge.
kms108 said:
I agree, the touchstone cost less, but with the touchstone charging rate is only 500mAh which has slow charging time.
I'll like to see the official one first.
Click to expand...
Click to collapse
---------- Post added at 10:09 AM ---------- Previous post was at 10:02 AM ----------
I plan on modding a case to do this. I am currently looking for some schematics because I have a feeling that this was provisioned in the design of the phone.
giritrobbins said:
The Qi standard offers a maximum of 1A in low power mode but a lot of the ICs on the market (TI) only support up to 500 mA. 500mA is about half of dedicated wall charging one I believe and the same as when you plug it into your PC to charge.
Click to expand...
Click to collapse
1A is more like it,the SGS3 has a charging rate of 1A through the mains.
i'm not in a rush for one so i'll see bother before I decide.
1Android said:
anyone know how wireless charging compares to outlet powered charging as far as strength and charge time?
Click to expand...
Click to collapse
I'm not too sure myself, but I've heard some people say it takes longer and others that say it takes just as long. I know when my husband had the palm pre and would use his touchstone it really didn't seem to be a very noticeable difference in time.
Sent from my SPH-D700 using Tapatalk 2
Does seem a little pricey, but would love to pick up one for my desk at work, grab and go when I go out on the floor.
It's new technology(For phones at least) so obviously they gonna rip off the early adopters, I mean I bought one for Nintendo DSI for £3 which has identical technology to what they put in that so I'm gonna take that apart and if it works just buy a cheap battery cover and stick it together.
If it is qi or compatible then the energizer charging pad will work. It is well worth the money imo. I used it with tbolt every night , before my slim, lean, toned s3 arrived. Now I just can't decide whether to ripe one of my spare tbolt qi doors apart or wait for factory s3 qi door.
For what I've seen if the palm is so easy why not use the "proper" dock and hack a tbolt or similar door.
Sent from my SCH-I535 using Tapatalk 2
Hopefully this combined with the Verizon version that someone posted some photos of will put some pressure on samsung to hurry up and release the official one...
Sonof the zens unit is $85 then the official Samsung one will be $100or more.
still no word on the wireless kit?
kms108 said:
I agree, the touchstone cost less, but with the touchstone charging rate is only 500mAh which has slow charging time.
I'll like to see the official one first.
Click to expand...
Click to collapse
For overnight charging, this is a good thing - extends the life of your battery. The higher your charge rate, the less your battery will ultimately live. The performance of your battery overall will degrade. Slow charging is a good thing.
If you want a fast charge, just plug into a USB cable if you are in a pinch.
Also, I read in the Galaxy Nexus threads (where the Palm Touchstone mod originated) that there's a software mod they are applying to increase that rate up to be nearly as quick as the 1A charger. The same type of mod may be applicable here.
I just got my ZENS+Shield kit for the S3 that has the protective shield instead of the OEM-style backing. I'm loving it!
Previously I had been using an OEM back with a Touchstone wireless charger installed in it, but I really wanted to have my elago slim hard case that makes the buttons recessed. I made an ugly hack that made it work most of the time but I hated having to fiddle with those Palm Touchstone chargers and making it align to the magnet.
Sometimes my cat could get annoying and just nudge it or maybe the phone would vibrate enough from alerts, it would get into this "charge-discharge" loop state that can't be good for the phone, sometimes even fully lose contact. It was just not very reliable -- I found myself sometimes just plugging it into USB to get a better charge.
The ZENS wireless back fits really well and provides the backing I wanted. I wish the texture was a bit more grippy but it's not exactly slippery. It's on-par with the stock grip. It's a bit heavier and slightly more bulky than the elago case but that's because it provides a bit more protection and has a rubbery pad for some sort of shock protection.
The charger is great too. I can put the phone in just about any position and it'll charge. They even brag it'll charge if you put it on a high volume speaker in the instructions (but it may take up to 2 mins for it to "negotiate" in that case.) It seems to charge faster than my Touchstone.
It's Qi standard so I should be able to use it with any charging pad. I was shopping for a second charger but the 3-position Energizer looks much too big as does the Duracell and the single position Energizer is slanted and I've read some people have issues with it sliding off. I like that the ZENS charger is flat and the size is nice, so I ordered another.
There's one downside to the ZENS charger but I think other chargers (except the Palm Touchstone) suffer the same problem: they do not use USB as a power source. My ZENS charger uses some ugly wall-wart. Also it's a bit more expensive.
Hi All! So this is my first time starting a new thread so I hope I'm doing this right. I couldn't really find a thread specifically for battery banks or battery backups so I thought I'd start one.
I was wondering what is everyone's method of backing up/recharging your battery for your cellphones? For me, the battery that comes with my phone is enough to get me through the day usually and I just charge it every night while I sleep. If I go on trips, I use the Rav Power 10000 mah battery bank. I find this a bit bulky but it works great and lasts many charges before I have to recharge again.
Everyone's taste and preferences are different so I'm seeing what other options are out there that may be lighter in weight. I'm thinking of getting their smaller one, the 5200 mah, and have this in my backpack or car for just in case.
Any mini reviews of what you have would be great :good:
Wow, cool gadgets, I need to get a bank for just-in-case emergencies. Thanks Currently i use a solar powered charger, which is really slow and somethings doesn't work as desired. Looks similar to this http://www.amazon.com/External-Univ...=8-4&keywords=solar+powered+cellphone+charger
Ive bought one at sunsky from china battery about 4000mah, but it was year before, now there is a better.
I used to have a bank that looked like a GBA SP, with foldable screens. In the screens were two solar panels, which charged the battery of, I think, about 2000mAh or something like that. The thing is now broken though. Still looking for a nice (affordable) replacement
Mine is Anker 5600
I use the Belkin 4000, size similar to a ext HDD and look nice, pocketable too
http://www.techhypermart.com/belkin-f8m160ak-portable-battery-pack-4000.html
Charger considerations
Hi,
I need advise for the following:
Charger A (Li-polymer battery) output : 5V, 1A
Charger B (Li-polymer battery) output : 5V, 500mA
Device input: 5V, 750mAH (Li-ion / Li-polymer)
When using Charger A, some people comment that it will limit the current of 750mAH for the device and the device's battery should be fine since both the charger and device are at 5V. However, some people comment that this will shorten the battery life of the device since it will perform a 'quick charge' using 1A.
When using Charger B, some people comment that the device will draw more current than it can deliver and causes it to heat up and reduces the charger's life. However, some people comment that Charger B will extend the battery life of the device since it performs a 'slow charge'.
I also read that USB pins on the charger denotes if the charger is a PC or a dedicated charger. If it is a PC, the device will limit the drawing current. If it is a dedicated charger, the device will draw more current to charge itself.
I am confused as to who is right and which charger should i be using.
Can someone enlighten me ?
Thank you very much.
bought this one from Ebay, has not yet arrived, therefore I cannot tell if its good or not.
but for its price its quite a good bet, 12000mAh for 33 bucks (on sale until tomorrow)
not able to post links, just type w ww. before the following
ebay.com/itm/12000mAh-External-Power-Bank-Battery-Charger-iPhone-3-4S-iPad-3-2-Blackberry-/280947027345
Zagg sparq 2.0 highly recommended
Sent from my GT-N7100 using xda premium
I recommend Anker 5600 is very good for that stuff.
Hi, I use choiix power fort 10Wh http://www.coolermaster-usa.com/product.php?product_id=3001 it have 2700mAh and it's small and looks very nice. It can give one full charge for my SGSIII
I went on a trip this year and searched for a good bank, and this showed up.
http://www.sayes.co/20-powerbank.html
I tried it and it was really good, it has lots of adapters and it's cheap =P
I was able to order a RavPower 5600mAh on sale a while back ago, that was posted on slickdeals. here. I am pretty happy with the performance of the little backup, it defiantly gets the job done. My only complaint is that the body gets scratched up easily.
I was comparing the Ravpower and the Anker 5600 and they both look exactly the same except that both are branded with their logos. So I'm wondering if they're from the same manufacturer. Going to have to do some more research. However my current Ravpower power bank I do have is working great and I love this thing for trips.
I'm also thinking of getting a solar one for my 3day emergency/bug out bag. Thanks for all the suggestions.
Green Ranger said:
I was comparing the Ravpower and the Anker 5600 and they both look exactly the same except that both are branded with their logos. So I'm wondering if they're from the same manufacturer. Going to have to do some more research. However my current Ravpower power bank I do have is working great and I love this thing for trips.
I'm also thinking of getting a solar one for my 3day emergency/bug out bag. Thanks for all the suggestions.
Click to expand...
Click to collapse
Yeah, can someone please let me know if they are the exact same manufactuers, except for the company logos on them? I am deciding between the two. Also, what do you guys think of their 2600maH stick version? Which manufactuer would you go for over the other and why? I am very interested.
I'm using a "Scosche SolBAT II Solar Powered Backup Battery and Charger" which I bought off Amazon for something ridiculous like $15 last year.
I bought it for hiking mostly as an emergency charger. I use a Huawei phone as a GPS out in the wilderness, and the GPS app (Androzic) is quite power intensive. I have also used the same device on an iPhone and an iPod touch. The Huawei phone will receive a full charge from this battery, but the iDevices will only go to around 75%.
The solar cell on the back of the battery isn't all that efficient and will take about two days to charge the internal battery, but having it there gives you more options should an emergency occur while in the wilderness. A half hour charging in full sunlight would provide enough power for a short call or a couple of texts to family or emergency services.
The device comes with suction cups and a small carabiner, so it can be stuck to the inside of your car window or clipped to the back of your rucksack. The device is lighter and smaller than the average smartphone and can be fully charged by USB in about three hours. Interestingly, the device has a LOT of bad reviews on Amazon, so maybe they simply sent me a good one.
I also have a very cheap and nasty handcrank USB charger from dealextreme which can be used to add a bit of juice to the solar battery pack at night or in cloudy weather or can directly charge the phone in an emergency. It's a little flimsy and takes a fair bit of cranking to get enough juice for even one call, but it weighs nothing, cost about $2 and is cheap insurance out in the boonies.
My list of power equipment for the phone/GPS and the iPod Touch for a multi-day walk are as follows:
Short Micro USB cable x 1
iPod USB cable x 1
Scosche SolBAT II battery/charger with alloy carabiner
DX hand crank battery charger
Total weight is less than 200 grams
nottellingeither said:
I'm using a "Scosche SolBAT II Solar Powered Backup Battery and Charger" which I bought off Amazon for something ridiculous like $15 last year.
I bought it for hiking mostly as an emergency charger. I use a Huawei phone as a GPS out in the wilderness, and the GPS app (Androzic) is quite power intensive. I have also used the same device on an iPhone and an iPod touch. The Huawei phone will receive a full charge from this battery, but the iDevices will only go to around 75%.
The solar cell on the back of the battery isn't all that efficient and will take about two days to charge the internal battery, but having it there gives you more options should an emergency occur while in the wilderness. A half hour charging in full sunlight would provide enough power for a short call or a couple of texts to family or emergency services.
The device comes with suction cups and a small carabiner, so it can be stuck to the inside of your car window or clipped to the back of your rucksack. The device is lighter and smaller than the average smartphone and can be fully charged by USB in about three hours. Interestingly, the device has a LOT of bad reviews on Amazon, so maybe they simply sent me a good one.
I also have a very cheap and nasty handcrank USB charger from dealextreme which can be used to add a bit of juice to the solar battery pack at night or in cloudy weather or can directly charge the phone in an emergency. It's a little flimsy and takes a fair bit of cranking to get enough juice for even one call, but it weighs nothing, cost about $2 and is cheap insurance out in the boonies.
My list of power equipment for the phone/GPS and the iPod Touch for a multi-day walk are as follows:
Short Micro USB cable x 1
iPod USB cable x 1
Scosche SolBAT II battery/charger with alloy carabiner
DX hand crank battery charger
Total weight is less than 200 grams
Click to expand...
Click to collapse
That is a nice list of equipment. How is the solar powered charger coming along?
tgmeyer said:
Yeah, can someone please let me know if they are the exact same manufactuers, except for the company logos on them? I am deciding between the two. Also, what do you guys think of their 2600maH stick version? Which manufactuer would you go for over the other and why? I am very interested.
Click to expand...
Click to collapse
Honestly i went with pricing. I assume if they look the same they are from the same vendors/manufactures but different brand/company. Reviews for both sound very good too. Ravpower had a promo going on a while back and i tend to see them pop up from time to time on slick deals. The stick might give you one charge but since it looks smaller than the rest, it may be the easiest and lightest to carry around. I say get a decent sized one. Anywhere between 5600mah to 10000mah so you can go through a few charges without needing to charge again.
I have a 6600 mAh(well, in my experience it's not true, more like 4-4.5k), but I rarely use it after I bought a tablet with a fullsized usb port in it.
solar charger
I was looking for a solar charger. I bougth one but it crashed in two days. Therefore I returned it and now I am waiting for another one. In the place I live there are few options
http://www.amazon.com/RAVPower®-Wir...F8&qid=1393455689&sr=8-3&keywords=ravpower+s3
After getting my Nexus 5 and getting spoiled with wireless charging, it was quite troublesome to charge via a usb cable when using my s3 as a secondary phone. So I wanted to get a wireless receiver to go along with the Nexus 5.
Packaging
Not much to talk about here, simple box containing the unit with a small plastic wrap inside. No frills.
Build Quality
The receiving tag is very thin, I can't compare it to others but im guessing they are all comparable. I had no problems putting the back cover on. There wasn't a huge bulge were the tag is. There is a slight bump but you would really have to be trying to feel for it to notice its even there.
Performace
Using my Ravpower Qi Charger it detected the tag instantly. There wasn't any time where I had trouble with getting the S3 to start charging. It didn't get any warmer than usual when charging with a usb cable.
I have a Diztronic case on my S3 and it charged it just fine through the case. I've tried other cases such as the ZooGue case had the same results.
Conclusion
For a mere 10 bucks, its sort of a no brainer for the convenience of wireless charging. I been using it for over 2 weeks and never had a problem with it.
You MUST have a wireless charging pad. Ravpower is offering a 20% discount on the receiving tag when you buy a charging pad with it via amazon. Details is under the "special offers" in the middle of the product page.
I recommend the Ravpower Orbit
Review of the Orbit here
http://forum.xda-developers.com/showthread.php?p=50243963
http://www.amazon.com/RAVPower®-Qi-...qid=1393456590&sr=8-1&keywords=ravpower+orbit
Note: I was provided a sample for an unbiased review
Do these guys make a Qi receiver for an S3?
krash183 said:
http://www.amazon.com/RAVPower®-Wir...F8&qid=1393455689&sr=8-3&keywords=ravpower+s3
After getting my Nexus 5 and getting spoiled with wireless charging, it was quite troublesome to charge via a usb cable when using my s3 as a secondary phone. So I wanted to get a wireless receiver to go along with the Nexus 5.
Packaging
Not much to talk about here, simple box containing the unit with a small plastic wrap inside. No frills.
Build Quality
The receiving tag is very thin, I can't compare it to others but im guessing they are all comparable. I had no problems putting the back cover on. There wasn't a huge bulge were the tag is. There is a slight bump but you would really have to be trying to feel for it to notice its even there.
Performace
Using my Ravpower Qi Charger it detected the tag instantly. There wasn't any time where I had trouble with getting the S3 to start charging. It didn't get any warmer than usual when charging with a usb cable.
I have a Diztronic case on my S3 and it charged it just fine through the case. I've tried other cases such as the ZooGue case had the same results.
Conclusion
For a mere 10 bucks, its sort of a no brainer for the convenience of wireless charging. I been using it for over 2 weeks and never had a problem with it.
You MUST have a wireless charging pad. Ravpower is offering a 20% discount on the receiving tag when you buy a charging pad with it via amazon. Details is under the "special offers" in the middle of the product page.
I recommend the Ravpower Orbit
Review of the Orbit here
http://forum.xda-developers.com/showthread.php?p=50243963
http://www.amazon.com/RAVPower®-Qi-...qid=1393456590&sr=8-1&keywords=ravpower+orbit
Note: I was provided a sample for an unbiased review
Click to expand...
Click to collapse
woneil said:
Do these guys make a Qi receiver for an S3?
Click to expand...
Click to collapse
Yeah they do but apparently they sold out of the s3. I imagine it'll come back in stock soon
Sent from my Nexus 5 using Tapatalk
The best deal for a wireless charging pad is from Monster Watts, sold through Vivealive (sp). $14.99, is the WiQiQi charging pad. They charge $5 shipping, first class USPS inside the US. The pad works well. Not much to look at though, but good deal for the $$..
I'm using the RavPower reciever. It works well together. What I have found out playing around with the charger, is that if you have a poor connection between the charger & reciever, you will get the on/off cycling. I have my phone in a Seidio Active case with velcro on the back to secure the phone on the Mountek CD slot car mount I use. The extra thickness of the velcro prevents good reception & I get the cycling. If I remove the plastic frame all is good. If I remove just the velcro all is good. The screen will flash once at charge start, turn off, then flash once when battery full, then turn back off. The phone will then remain on the pad in standby with no cycling.
It all works a treat, I can't wait to get my AirDock for the car to add wireless charging there as well.
Ravpower said it'd come back in stock within a week. Also, I don't have experience with any other Qi charging base, just ravpower and they've worked great for me
I received my charger from Choetech yesterday and tested it with my moto 360 as well as a few of my other devices.
I figured that I should post my review (from amazon) up here due to the testing on the moto 360. I have bolded that parts people here will be interested in.
http://www.amazon.com/Wireless-Char...r=1-1&keywords=choetech+fast+wireless+charger
First, this is an amazing charger. Choetech always makes good products.
I received this in 2 days and set about testing it.
I was going to make a video showing off this thing fast charging on a Samsung Galaxy Note 5 but I see that there are already 2 excellent videos up showing that. So instead I will show you the things they did not highlight as much.
OK, the quick charge 2.0 wall plug you can get with this is the best one I have ever tried. Just like the other Qualcomm certified chargers, you will get the self adjusting voltages (12v-9v-5v) to give you a super fast charge. The extra you get with this Choetech quick charge 2.0 adapter is the USB port on it is reversible! This is the first charger I have seen with this and I now think everything should have this.
Ok now to the real reason you are reading this. The charging puck itself is a nice clean looking puck.
It is defiantly thicker than the cheapo ones you get for a few dollars. It has some heft to it making it feel more premium.
It has rubber top and bottom to keep both the charger from slipping on your desk or the phone from slipping on top the charger.
It will most defiantly charge your Note 5 or other Samsung devices quickly.
It will also charge your older devices as well. I tested it on a few LG phones in addition to the Note 5.
I noticed no abnormal warmth from the charger or any of the phones I tested this with. This is a very welcome thing as most of my other qi chargers do have heat issues.
One final thing, I tested this charger on my moto 360 and it charged it flawlessly. Most qi chargers fail here and will overheat this watch, this one did not and it charged my moto 360 from 19% to full in about 35 minutes. that is about 15 minutes faster than the stock charger does.
I received this product in exchange for an honest review, this does not affect my opinion of this product.
The fast charging works for a Note 5 or S6 Edge+, right? As far as I know that's a requirement as the new charger operates at a higher voltage.
RAM LILA said:
The fast charging works for a Note 5 or S6 Edge+, right? As far as I know that's a requirement as the new charger operates at a higher voltage.
Click to expand...
Click to collapse
It will fast charge at a higher voltage on a Note 5 or S6 Edge+, but will work at normal speeds on every other Qi enabled device, including our moto 360.
Milimbar said:
I received my charger from Choetech yesterday and tested it with my moto 360 as well as a few of my other devices.
I figured that I should post my review (from amazon) up here due to the testing on the moto 360. I have bolded that parts people here will be interested in.
http://www.amazon.com/Wireless-Char...r=1-1&keywords=choetech+fast+wireless+charger
First, this is an amazing charger. Choetech always makes good products.
I received this in 2 days and set about testing it.
I was going to make a video showing off this thing fast charging on a Samsung Galaxy Note 5 but I see that there are already 2 excellent videos up showing that. So instead I will show you the things they did not highlight as much.
OK, the quick charge 2.0 wall plug you can get with this is the best one I have ever tried. Just like the other Qualcomm certified chargers, you will get the self adjusting voltages (12v-9v-5v) to give you a super fast charge. The extra you get with this Choetech quick charge 2.0 adapter is the USB port on it is reversible! This is the first charger I have seen with this and I now think everything should have this.
Ok now to the real reason you are reading this. The charging puck itself is a nice clean looking puck.
It is defiantly thicker than the cheapo ones you get for a few dollars. It has some heft to it making it feel more premium.
It has rubber top and bottom to keep both the charger from slipping on your desk or the phone from slipping on top the charger.
It will most defiantly charge your Note 5 or other Samsung devices quickly.
It will also charge your older devices as well. I tested it on a few LG phones in addition to the Note 5.
I noticed no abnormal warmth from the charger or any of the phones I tested this with. This is a very welcome thing as most of my other qi chargers do have heat issues.
One final thing, I tested this charger on my moto 360 and it charged it flawlessly. Most qi chargers fail here and will overheat this watch, this one did not and it charged my moto 360 from 19% to full in about 35 minutes. that is about 15 minutes faster than the stock charger does.
I received this product in exchange for an honest review, this does not affect my opinion of this product.
Click to expand...
Click to collapse
Seems they have a cheaper standard wireless charger for other Qi enabled device. Same design but cheaper at 20 bucks.
Link: http://www.amazon.com/gp/product/B013AB620C
RAM LILA said:
Seems they have a cheaper standard wireless charger for other Qi enabled device. Same design but cheaper at 20 bucks.
Link: http://www.amazon.com/gp/product/B013AB620C
Click to expand...
Click to collapse
I have not tried it but I would assume with how well the fast charge one works, the cheaper one should also work to charge out watches without overheating them.
Interesting charger! Are wireless chargers efficient and as quick as cabled chargers? How long does it complete 100% charging your phone?
MonaSpencer said:
Interesting charger! Are wireless chargers efficient and as quick as cabled chargers? How long does it complete 100% charging your phone?
Click to expand...
Click to collapse
Just from experience, no science here.
A normal Qi charger will take about 2 times as long to charge your phone as a standard 2a charger.
This fast Qi charger is about the same speed on a compatible phone as a normal cable charger.
The fastest way to charge is with a qualcom certified quick charger and phone, that is significantly faster than a standard charger.
Think I'll pick one up,no overheating,that's worth it alone.
Hi all, I'm considering getting this device, but want to have wireless charging.
has anyone purchased a 3rd party wireless charging receiver, and if so, what has been your experience? are you using a case?
thanks!
The Pixels do not natively support wireless charging. You will have to wait for a company to make a wireless charging case that adds this functionality.
For example, on the Pixel 1:
http://www.mophie.com/shop/juice-pack-pixel-xl
https://www.walmart.com/ip/Type-C-W...5277&wl11=online&wl12=329382371&wl13=&veh=sem
He is talking about something like this and was wondering what people's experience was using them
AsuraDas said:
https://www.walmart.com/ip/Type-C-W...5277&wl11=online&wl12=329382371&wl13=&veh=sem
He is talking about something like this and was wondering what people's experience was using them
Click to expand...
Click to collapse
correct.
looking at the reviews on Amazon, many users are claiming that it works fine with the pixel 2.
I haven't used them, my only concern is how easy it would be to unplug the wireless charger in the even I need to access it either to charge or connect it to something like computer or God forbid headphones
AsuraDas said:
I haven't used them, my only concern is how easy it would be to unplug the wireless charger in the even I need to access it either to charge or connect it to something like computer or God forbid headphones
Click to expand...
Click to collapse
100% agreed.
that's why I enjoy my droid turbo (built in wireless charging).
however, i MAY be fine with accepting this so long as the battery life is great as it has been claimed (able to go a full day in between charges), and I may ask for a pair of them google pixel ear buds for my birthday.
so the solution would be to get an extra wireless charging pad (less than $10) and get a pair of wireless earbuds.
but if the deal breaker for me would be the battery life. my current device as a 3900mAh battery and can go all day and then some. but, it is 2+ years old, and the battery is deteriorating, so it's not lasting as long. but if the Pixel 2 can deliver, then I may be fine with that.
Honestly battery life has been really good for me. I get 4+ hours of SoT which includes playing games and watching videos.
AsuraDas said:
https://www.walmart.com/ip/Type-C-W...5277&wl11=online&wl12=329382371&wl13=&veh=sem
He is talking about something like this and was wondering what people's experience was using them
Click to expand...
Click to collapse
Oh, very cool, actually! I would also be worried about continuous unplug/replug for anyone using wired headphones or wanting to plug in for faster recharge. Let us know if you try it!
Lost wireless charging when I got the Nexux 5x. Never really missed it much. While somewhat convenient, it was slow to charge and many times when I needed a fast charge I just plugged in anyway.
So, Nexus 5X -> Pixel -> Pixel 2, same thing, I have chargers where I need them and charging is pretty quick. So, at the office, in my truck, by the recliner and in my home office I have fast chargers. I am covered. I also have a fast chargers in my backpack when I out an about.
krelvinaz said:
Lost wireless charging when I got the Nexux 5x. Never really missed it much. While somewhat convenient, it was slow to charge and many times when I needed a fast charge I just plugged in anyway.
So, Nexus 5X -> Pixel -> Pixel 2, same thing, I have chargers where I need them and charging is pretty quick. So, at the office, in my truck, by the recliner and in my home office I have fast chargers. I am covered. I also have a fast chargers in my backpack when I out an about.
Click to expand...
Click to collapse
understood that wireless charging is a preference and not a necessity.
as for me, it's more of a convenience factor as well as less wear/tear on the port (and battery life from my understanding). to have the ability to pick it up and go rather than pulling on a cord is a great help.
i did this with my wife's iPhone 7. and she really enjoys it (and it's difficult to get her to adopt to new technologies - hence why she has an iPhone).
jco23 said:
Hi all, I'm considering getting this device, but want to have wireless charging.
has anyone purchased a 3rd party wireless charging receiver, and if so, what has been your experience? are you using a case?
thanks!
Click to expand...
Click to collapse
I purchased the Spigen thin fit case and a Nillkin usb-c qi tag (short version). Have been using it for a few weeks and works with all my old Qi chargers used on my Nexus 6.
The case has a recessed area where the tag can sit without producing a bulge.
reddit.com/r/GooglePixel/comments/7an3sm/pixel_2_wireless_charging_solution_nillkin_qi_tag/
To throw my 2 cents in. Used a USB Type-C wireless receiver with my OG Pixel XL and it worked fine, as soon as received my PXL2 I connected the adapter but it was unfortunately insufficient to provide a decent charge, even over night, many times having the same or less battery percentage left than before laying it on the Qi charger. I have since tried 2 different wireless receivers with the same result. I've gotta believe they can manufacturer one that will out put enough juice to power and charge the battery. If anyone comes across one, please let the community know. TIA.
I've purchased the Nillkin short receiver and it does not work.
I charged it overnight in a thin Spigen case and it discharged 5% overnight.
I tried charging using the receiver outside of the case and at best pulled 0.31A on a 1.5A rated qi base.
What about one of the "Magsafe" type USB C cables (https://www.amazon.co.uk/COCHING-Magnetic-Charging-Lightning-Adapters/dp/B073HC1DJB/ref=sr_1_3?ie=UTF8&qid=1522506792&sr=8-3&keywords=usb+c+magnetic) if you're looking to reduce wear and tear? I assume you still get quick charge.
Looking at Nillkin's website, the tech specs on the USB-C "magic tag" give it a max output of 5V/1A. As we all know, Volts x Amps = charginess (or "Watts," for the electrical engineers). The power supply that comes with the Pixel 2 has an output of 5V/3A or 9V/2A.
So the phone's stock power supply charges at 15w or 18w. The Nillkin magic tag only feeds it 5w. At best, that's going to be a SLOOOOOOOOOW charge. The type 3 "fast charge edition" charger says it outputs more (10w). So the fast charger will send 10w to the magic tag, which will then feed 5w to your phone's battery.
Too bad. Seems like this could be a viable solution if there's a receiver that will output 10w. I mean, that still wouldn't charge as fast as the stock, wired power supply but at least it would probably charge. I'd love to have wireless charging with my new Pixel 2 but if the best it can do is 5 Watts, I'll live with the minor inconvenience of having to plug it in.
I thought wireless require all glass body which would be a no for me