Related
ATT LG Optimus G Pro Here
I used newest FreeGee , Installed TWRP & Now im stuck in recovery mode. I flashed gummy rom first time & It worked. Ran into problem after I installed the Google apps so I did a factory reset, wiped everything to try again to install gummy rom. Now I'm stuck in TWRP. I also used ADB sideload commands to push the rom to phone & It did push it, except now. When I try to install the rom, It keeps saying FAILED. Can someone tell me what im doing wrong?
newgeek- I don't know if the AT&T version of this is very different to my F240 version but I am familiar with that 3rd screen you posted with the "secure booting error" or something like that.
What about just pulling that battery out and doing factory reset and start over from the beginning ?
LL13-
newgeek35 said:
ATT LG Optimus G Pro Here
I used newest FreeGee , Installed TWRP & Now im stuck in recovery mode. I flashed gummy rom first time & It worked. Ran into problem after I installed the Google apps so I did a factory reset, wiped everything to try again to install gummy rom. Now I'm stuck in TWRP. I also used ADB sideload commands to push the rom to phone & It did push it, except now. When I try to install the rom, It keeps saying FAILED. Can someone tell me what im doing wrong?
Click to expand...
Click to collapse
Try to push another ROM via adb, I read in the general Section that there were some Gummy files that weren't the right size, just download CM11 and try to flash it, TWRP is saying that the flash failed, that's why you are stuck in recovery.
Erik
The phone currently has no OS , I also tried to mount my 64gb sd card to install off of that & It gives me a mounting error for SD CARD. I have tried several other roms & No luck , Keeps giving me FAILED. Is this because of the secure boot perhaps? I'm totally clueless why it's not taking it. I'm running my nexus 4 with the gummy rom without a hitch.
Why not try a different SD card ? If that SD card was in the phone when all this happened maybe something is on the card that's bad ?
LL13-
I borrowed a 2GB SD CARD & It mounts but same thing as before FAILED. Tried both gummy & CM 10.2
newgeek35 said:
I borrowed a 2GB SD CARD & It mounts but same thing as before FAILED. Tried both gummy & CM 10.2
Click to expand...
Click to collapse
It looks like an error with the updater script, maybe something twrp isnt reading or executing? try a different rom.
At worst try a different Recovery.
ADDED:2/4/2014: I would avoid twrp on freegee, i've heard others have issues and it may have something to do with your situation.
Also, I noticed your twrp says 2.6.1.0, am I mistaken or is the newest teamwin 2.6.3.1? That number don't look right.
If possible try to flash madmacks twrp or cwm 6.0.4.6.
1.Try to Flash a ROM via sideload
2. you can end the recovery boot loop by using adb commands, there are two methods try them
http://forum.xda-developers.com/showpost.php?p=49370751&postcount=70
and
http://forum.xda-developers.com/showpost.php?p=48136185&postcount=268
I had the same issue seems like the are some problems with TWRP on this particular phone I flashed the regular clockworkmod and it works perfect.I tried on another phone with same results.
Right now
Flash stock rom
root
use freegee to install regular cwm I tried rom manage but recovery did not installed
the flash another rom if thats what you really want but copy rom directly to sd card instead
Its not just twrp apparently the new update of freegee installs the wrong bootloader/image on our phone. It bootloops anyone that uses it.
Sent from my LG-E980 using XDA Premium 4 mobile app
Use Madmack's hacked TWRP located in his CM threads. Best recovery for our device from what I've seen/tested.
Sent from my AICP 4.4 LG-E980
Neroga said:
Use Madmack's hacked TWRP located in his CM threads. Best recovery for our device from what I've seen/tested.
Sent from my AICP 4.4 LG-E980
Click to expand...
Click to collapse
Madmack's TWRP is reliable when you want to have no bootloops into your recovery. But i have the problem, that i cannot flash any other roms and it shows, that my LG E986 isnt recognized as a suitable device for the rom and it aborts the procedure. Although on the other recoveries it worked fine...
Is there something what i have to do except switching recoveries to my phone's death?
I used ADB to push the stock rom back to device & It took it's sweet time but it worked. I sold the phone to a friend of mine LOL! They wont know the difference.
hey guys hope you guys can help when i flash this is what i get (updating partitin details....
running boot script...
finished running boot script.
simulating actions...
updating partitions details...) but the rom wont flash
heres the tricky i formated my system so i have no o.s. and my usb port does not sync it only charges i tried flasing twrp again and also phils touch and tried flashing different roms but to no prevail, my ? is is their any way with in my sdcard and twrp file manager where i can delete replace any files or scripts internally into my phone .
bigpappapuff said:
hey guys hope you guys can help when i flash this is what i get (updating partitin details....
running boot script...
finished running boot script.
simulating actions...
updating partitions details...) but the rom wont flash
heres the tricky i formated my system so i have no o.s. and my usb port does not sync it only charges i tried flasing twrp again and also phils touch and tried flashing different roms but to no prevail, my ? is is their any way with in my sdcard and twrp file manager where i can delete replace any files or scripts internally into my phone .
Click to expand...
Click to collapse
Did you update to 4.4.2?
Besacuse If you update the bootloader are experiencing the same problem as many of us.
You are speaking about scripts at boot. But you did not refer to the updater script that actually flashed the Rom. Also what Rom are you trying to flash ? What is your current bootloader and Recovery ?
Perseus71 said:
You are speaking about scripts at boot. But you did not refer to the updater script that actually flashed the Rom. Also what Rom are you trying to flash ? What is your current bootloader and Recovery ?
Click to expand...
Click to collapse
i put up the images i was on 4.3. i was running twrp v2.6.3.1
i was n the serx tw rom and was trying to flash liquid smooth and when back trying t flash serx again but cant the updater script is what i was trying to talk about is their any hope
I also tried t flash phillz touch and cant. my usb port nly charges if i can find a way that i can go internally threw wiring so i can connect odin ill be good.
I genuinely have a hard time trying to follow what you are saying. I did see the photos but they don't help much. I do want to help you. But I really having hard time following you.
Can you please articulate better? Or use Google translate if English is not your first language.
Perseus71 said:
I genuinely have a hard time trying to follow what you are saying. I did see the photos but they don't help much. I do want to help you. But I really having hard time following you.
Can you please articulate better? Or use Google translate if English is not your first language.
Click to expand...
Click to collapse
its started when i tried t flash liquid smooth rm 4.4.2 but twrp 2.6.3.1 would not flash all it would say is (updating partitions details....etc as shown in the image so i tried to flash serx rom 4.3 and it wouldnt flash. i also tried flashing philz touch cwm but it gave me the same result. my usb port only charges it wont sync with my pc so i cant odin back. is their anyway i can fix this issue thnx
Please use Mobile Odin and flash Stock Rom first. Then Flash latest TWRP again.
Perseus71 said:
Please use Mobile Odin and flash Stock Rom first. Then Flash latest TWRP again.
Click to expand...
Click to collapse
i cant no o.s. on the phone when i wiped i wiped everything except the micro sd and ineternal storage.
Oh, so are you telling me that right now, every partition on the phone is wiped cleaned and the USB port does not recognize in Odin ?
What Recovery is on it right now ?
Perseus71 said:
Oh, so are you telling me that right now, every partition on the phone is wiped cleaned and the USB port does not recognize in Odin ?
What Recovery is on it right now ?
Click to expand...
Click to collapse
twrp 2.6.3.1
Download SlimKat v 3.10 You will need Gapps.
Flash via the Recovery. Make sure to take a photo if error occurs.
Try using clockwork because I had alot of issues flashing newer Roms on twrp just sayin
Sent from my SGH-T999 using xda app-developers app
Maybe I missed something, but if you can get download mode, you should be able to use Odin. Have you tried reinstalling drivers?
Sent from my SM-N900T using Tapatalk
I'm (or rather, was) on CM13 nightly, today I downloaded TWRP through Flashify and flashed it, previously I was using Philz Touch, now I have a bootloop. I just had a bootloop a few days ago and had to install everything over again, and I really don't feel like doing it again. What can I do?
Error503 said:
I'm (or rather, was) on CM13 nightly, today I downloaded TWRP through Flashify and flashed it, previously I was using Philz Touch, now I have a bootloop. I just had a bootloop a few days ago and had to install everything over again, and I really don't feel like doing it again. What can I do?
Click to expand...
Click to collapse
Can you enter the recovery mode? And if so I would recommend reflashing everything, that usually helps xD
Summoned Egar said:
Can you enter the recovery mode? And if so I would recommend reflashing everything, that usually helps xD
Click to expand...
Click to collapse
Yes I can, but I reeeeeally don't feel like going back to stock AGAIN, I was thinking maybe flashing CyanogenMod Recovery would help fix the issue since TWRP is apparently not compatible with Marshmallow, the problem is I can't get my PC to recognize my phone in fastboot mode therefore I can't flash the new recovery. Any ideas?
Error503 said:
Yes I can, but I reeeeeally don't feel like going back to stock AGAIN, I was thinking maybe flashing CyanogenMod Recovery would help fix the issue since TWRP is apparently not compatible with Marshmallow, the problem is I can't get my PC to recognize my phone in fastboot mode therefore I can't flash the new recovery. Any ideas?
Click to expand...
Click to collapse
Why didn't you backup your data? Always backup your data! Moreover, put the image to flash on your sd card
Summoned Egar said:
Why didn't you backup your data? Always backup your data! Moreover, put the image to flash on your sd card
Click to expand...
Click to collapse
Alright, I can do that. How do I flash it after it's on my SD?
Error503 said:
Alright, I can do that. How do I flash it after it's on my SD?
Click to expand...
Click to collapse
Wipe as usual, then in TWRP go to mount and choose external_sd, after that navigate up until you find the folder external_sd and load from there
You don't need to go back to stock. If you can enter recovery, you can wipe system (only) and dirty flash your cm13 over it. It usually works and dont lose your personal files nor installed apps. If it don't, do a full wipe and flash your rom again.
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Thanks for the reply.
Are you sure what happened to is exactly what happened to you? Because I tried the ToolKit and it is not working. I tried both the versions of the TWRP and Stock recovery.
If you know anything else about this issue that would help me. I'd love to hear it.
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Also. Does encryption affect this in anyway, because I did it. I don't want to factory reset my phone because this is my primary phone and I don't have another phone. And I don't want to risk it, at least for a few days.
malachiseelam said:
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Click to expand...
Click to collapse
Modified TWRP version should do it
Same, when I flashed cm 14.1 I also got blank TWRP.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Then, what did you do?
LS.xD said:
Modified TWRP version should do it
Click to expand...
Click to collapse
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
malachiseelam said:
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
Click to expand...
Click to collapse
Thanks it worked!
Please try the modified TWRP, 3.0.2-22