Related
Credits:
Foremost, let us all acknowledge Koushik for his brilliant "Sensors" library upon which most if not all non-HTC apps that use the G-Sensor, Light-Sensor, and Navi-Sensor are built, simply ingenious. Moreover, I would like to recognize No2chem for the NeuLed2 library which is an equally exquisite peace of code that allows access to the Diamond/Pro Leds. Without those two guys, accessing these advance interfaces on the diamond/pro would be inapproachable at best.
Reason: HTC gave these phones lots of sensors, lets give them.."Sense".
......... EXTRA-Sense ...........
* Hopefully an innovaton, though mostly an integration of RANDOM but needful features...
Features:
1. Courtesy Profiles:
- Set Volume Profiles to activate on Face-Down & Face-UP events. Choose from: None, Silent, Normal, and Vibrate. You can also choose to suspend the Phone when its facing down.
2. Notifications-Sense:
- IF there is/are any outstanding notification(s), the device will vibrate whenever you move it - at customizable intervals: Missed Call(s), Voice Mail, and SMS.
3. Stylus-Sense:- When the Stylus is in/out: Will play sound + Blink the Back button's light.
- When the Stylus is out and the device is moved: Device will vibrate faintly + blink the Back button's light to REMIND you that the Stylus has not been placed back in. This goes on UNTIL the Stylus is placed where it should be.
* Uses "in.wav" & "out.wav" files in the \XSense\ Dir; you can use whatever wave files for this. OR, use the UI to select whichever wave files you want!
4. General Settings:
- Polling Interval: From 200 to 3000 Miliseconds. This determines the rate at which the G-Sensor is polled. Lower values give higher response times and fluid operation at the cost of battery life & CPU utilization.
- Flash Navi Lights: Will blink button lights to notify you of Profile changes and Stylus In/Out.
- Vibrate on Events: Will induce very subtle vibrations to notify you of Notifications and Profile changes.
- Suspend when UP-Side-Down: ???
- Light Navi Button When Suspended: Will do just that when the Light Sensor senses Dim or Dark conditions. This is an independent setting that turns ON the Navi button's light at suspend time, and OFF at Resume time (this is Event Driven, so no polling is involved). This feature really helps if, like me, you want to see where the damn thing is in the dark - before you launch it against the floor.
5. Installs to "\Program Files\XSense", and Creates 2 shortcuts:
"Start Menu\Programs\XSense" and "Startup\XSenseSvc".
Program Settings are saved to the Registry at "HKCU\Software\XSense\".
Use of System Resources:
1. Diskspace: 162 KB RAM footprint: 374-535 KB Battery: NOT observed.
2. CPU Usage: %0.29 Average. Spikes for 2 seconds to %2.7 - %8.5.
3. Battery Impact: Neligeable if at all!
* Indicated CPU usage occurs ONLY when there is an EVENT (posture changed, stylus in/out Sounds playing,
etc)
- Vibration: The way I like it is in waves of 200 miliseconds length! I generally hate vibrations, so if you want it at 201 ms. you're welcome to make your own program and exercise your personal taste.
- This prgram Registers Event Handlers for: "G-Sensor", "Incoming Call", "Phone Call in Progress", "Stylus in/out", and Power Manager events. DO NOT move it to Internal Storage, you have been warned.
Requirements:
.NET 3.5 + HTC device with GSensor & Light Sensor.
Compatibility:
Specifically designed for Diamond & Raphael, but will work fine on HD/Rhodium/Topaz/HD2 etc...
Bugs/Limitations:
Knock yourself out...
Release Notes:
- This is the LAST revision/release/app I make; programming too much work
- Download & Install the CAB
- Run the XSense from your Start Menu\Programs, customize to taste, and enjoy!
Change Log:
- Brand New UI: VERY "finger friendly" this should be especially useful if you have a WVGA Device
i.e. HD/Rhodium/Topaz/HD2 etc...
- Revised entire code for existing & potential bugs, and Performance
tweaked to death.
- Removed various functions (auto speakerphone, car-kit options, etc...). Use "Touch InCall Screen Tweak" for these,
its handles Phone/Speaker brilliantly!
- Shortcut added to Startup for automatic launch after reboot.
- Shortcut with a nice icon added to Start Menu (Credit to VetVito).
- General Tab:
- Navi Button will only light up if the device is in a dark place, i.e. You will
always see where your phone is (before you trash it against the wall).
- Stylus Tab:
- UI elements to select & set sounds for Stylus-in/out events.
Disclaimer:
This program is provided strictly "as is". It is intended only as a proof-of-concept. Although fully functional, it must NOT be considered for daily use. This software is very likely to compromise the integrity of your data as well as invariabley cause your device to malfunction in any way, shape, or form. Therefore, the developer shall be absolved of all responsibility towards testers and/or their computers & devices. While using this software you agree to be solely liable for all and any damages you do to yourself, your device, or any damn thing you possess and care for!
Download XSense 1.2 - Final:
http://forum.xda-developers.com/attachment.php?attachmentid=265847&d=1263112521
any screenshots?! Thanks
Super Cool App Thank you Dude now to REPORT
Only The function Suspend when i turn my device Up side down and the Stylus Sound In Out work perfect all other functions not working for me im using the ROM from my signature.
Also in HD Tweak i have option to enable to mute call when face is down but still not working
About the Lights they can`t flash because we don`t have buttons on our Blackstones
The Profiles sometimes work sometimes not work i mean when the face is down sometimes the phone is going to silent but from 10 times only once working ...
So i will use the Suspend Up side down and the sound for now
Thanks
tsalta said:
Super Cool App Thank you Dude now to REPORT
Only The function Suspend when i turn my device Up side down and the Stylus Sound In Out work perfect all other functions not working for me im using the ROM from my signature.
Also in HD Tweak i have option to enable to mute call when face is down but still not working
About the Lights they can`t flash because we don`t have buttons on our Blackstones
The Profiles sometimes work sometimes not work i mean when the face is down sometimes the phone is going to silent but from 10 times only once working ...
So i will use the Suspend Up side down and the sound for now
Thanks
Click to expand...
Click to collapse
Hey, sorry I just saw your post; This doesn't sound like a problem with the program.
Try Calibrating your G-Sensor, if that doesn't solve it, turn your phone off and remove the battery for 5 seconds then turn it on again... that should fix it
This is a perfect app it works perfectly for me on EnergyROM.
Many thanksss
zakariae said:
This is a perfect app it works perfectly for me on EnergyROM.
Many thanksss
Click to expand...
Click to collapse
It is my pleasure, mate Enjoy until the new one comes out (don't ask when tho )
Cheers
Arc Lighting adds a highly customizable ring of light around the camera cutout of your phone. You can use this light with various indicators such as audio visualization, notification lighting, critical or low battery warnings, as well as a charge indicator. The ring can also appear on your Always-On display. (to make aod work you need to make sure you have downloaded always on amoled and activated it, you also need to make sure samsung stock aod and samsung edge lighting is disabled under samsung display settings you also need to make sure that aod is enabled under arclighting with override set to off)
https://www.youtube.com/watch?v=FibMTD5Mdx8
Features:
- Highly customizable lighting for the Galaxy S10, S10+, S10e, and Note 10. Select a variety of colors, animations, and styles.
- Always show ring with various gradient effects (add multiple colors and make them spin for a visual experience)
- An adjustable glow effect that can be turned on or off (sometimes this can cause the light to freeze to a white glow this will be fixed)
- Notification lighting both when the display is on or off (update planned for only the lockscreen or only inapp)
- Music lighting that syncs the light to your music (does not work together with other indicators so other indicators will stop working if you enable music lighting this will be fixed)
- Battery indicator lighting for charging, low and critical battery states. (note it will not work until you configure the zones you want the colors to appearm, not configuring zones can freeze the light entirely this will be fixed)
- Device overheating indicator for gamers and power users (note it will not work until you configure the zones you want the colors to appear, not configuring zones can freeze the light entirely this will be fixed)
- Arc Lighting can be configured to match the color of your wallpaper, the app you're currently in, or both! (this only works for the only show ring and only when you set it to a solid color the option is not available for gradient colors which will be added later)
This app requires certain permissions to function correctly.
Accessibility: This permission is used for the ring to appear over your lock screen, always-on display, and for accessing the color of the current app you're in. This permission is required for the app to function properly.
Draw Over Other Apps: This permission allows the ring to show on top of other apps. This permission is required for the app to function properly.
Microphone Access: This permission is used to analyze the internal device audio for the music lighting. You will not be asked for this permission unless you choose to enable the Audio Visualizer indicator for the ring.
Storage Access: This permission is used to get the color of your wallpaper. You will not be asked for this permission unless you choose to use the color of your wallpaper for the ring.
Notification access: This permission is used to change the color of the ring after notifications
Burn-in concerns: Some Android displays may suffer from mild burn-in if a single item is displayed on the screen for an extremely significant amount of time. If you are concerned about this, feel free to enable the rotation animation in ring settings. That will ensure the display is constantly changing. Alternately, you can disable the default effect to only show the ring while an indicator is being triggered. Note: Samsung Galaxy devices come with burn-in protection that moves the pixels a little each time.
Compatible Devices
- Galaxy S10+
- Galaxy S10
- Galaxy S10e
- Galaxy note 10
- Galaxy note 10+
- Galaxy note 5g
Download (xda members get free access, will provide unlock codes to any xda member who asks when you ask please specify if you want the code for my navigationbar app or this app as they both have similar names)
https://play.google.com/store/apps/details?id=com.symetium.holepunchcameraeffects
FREQUENTLY ASKED QUESTIONS:
how do i disable individual notifications: currently this is a planned update, you can go into custom colors and set each app you don't want notifying to 100% transparent
light is constantly flashing even if i cleared all notifications: sometimes theres forced notifications such as when you're charging it will force a notification that says you're fast charging, the light will pick up on these you need to hold on these notifications and turn them off to stop the light there should be nothing at all in the notificationpanel, if you still have a flashing light with nothing in the panel contact me.
frozen light: music lighting will disable all other indicators same with battery indicator or battery temp indicator, you need to set custom zones otherwise the light will be frozen, glow also tends to freeze the light so turn that off if it's frozen (this will be fixed in a coming update)
Great job! Testing it out this very moment. Would love a code ?
/CK
Great app! Would love a code too!
jabberwock said:
Great app! Would love a code too!
Click to expand...
Click to collapse
send me a message and i'll send the code
Nice. Would also love a code!
nds850 said:
Nice. Would also love a code!
Click to expand...
Click to collapse
send me a message and i'll send the code
zzcool said:
send me a message and i'll send the code
Click to expand...
Click to collapse
Tax in advance
Thanks, I would like a code please
Thanks would love a code also
Sent from my SM-N976B using Tapatalk
Great job man , I would like a code please
Sent from my Samsung SM-N975F using XDA Labs
thank you for the app. can you message me the code ?
Peace!!
Thanks for creating app...Testing the app out now. May I please have a code (Inbox me)
Tried the app and willing to purchase a license but when I was setting it up there was an ongoing Android system notification about the app that every time I disable it would turn right back on.
Count me in for a code please, and thanks in advance.
I'd kindly take a code fine sir...
Sent from my SM-N975U using Tapatalk
been testing out several solutions with mixed results.
Would love a code to try this out as well. Thanks in advance!
Please send me a code if you have any left. Thanks.
bp328i said:
Tried the app and willing to purchase a license but when I was setting it up there was an ongoing Android system notification about the app that every time I disable it would turn right back on.
Click to expand...
Click to collapse
Got the same as you.. have to uninstalled
KLPFL said:
Got the same as you.. have to uninstalled
Click to expand...
Click to collapse
Glad I'm not the only one. I really should have posted about it with screenshots at the time, but honestly didn't think about it.
Interested ! May I have a code?
Arc Lighting adds a highly customizable ring of light around the camera cutout of your phone. You can use this light with various indicators such as audio visualization, notification lighting, critical or low battery warnings, as well as a charge indicator. The ring can also appear on your Always-On display. (to make aod work you need to make sure you have downloaded always on amoled and activated it, you also need to make sure samsung stock aod and samsung edge lighting is disabled under samsung display settings you also need to make sure that aod is enabled under arclighting with override set to off)
https://www.youtube.com/watch?v=FibMTD5Mdx8
Features:
- Highly customizable lighting for the Galaxy S10, S10+, S10e, and Note 10. Select a variety of colors, animations, and styles. (nord is not officially supported but the app now comes with a custom alignment adjuster so it should now be supported by just adjusting this under cutout settings make sure realtime adjustment is set to off when you're finished any help on official support will be granted a tier 5 code)
- Always show ring with various gradient effects (add multiple colors and make them spin for a visual experience)
- An adjustable glow effect that can be turned on or off (sometimes this can cause the light to freeze to a white glow this will be fixed)
- Notification lighting both when the display is on or off (update planned for only the lockscreen or only inapp)
- Music lighting that syncs the light to your music (does not work together with other indicators so other indicators will stop working if you enable music lighting this will be fixed)
- Battery indicator lighting for charging, low and critical battery states. (note it will not work until you configure the zones you want the colors to appearm, not configuring zones can freeze the light entirely this will be fixed)
- Device overheating indicator for gamers and power users (note it will not work until you configure the zones you want the colors to appear, not configuring zones can freeze the light entirely this will be fixed)
- Arc Lighting can be configured to match the color of your wallpaper, the app you're currently in, or both! (this only works for the only show ring and only when you set it to a solid color the option is not available for gradient colors which will be added later)
This app requires certain permissions to function correctly.
Accessibility: This permission is used for the ring to appear over your lock screen, always-on display, and for accessing the color of the current app you're in. This permission is required for the app to function properly.
Draw Over Other Apps: This permission allows the ring to show on top of other apps. This permission is required for the app to function properly.
Microphone Access: This permission is used to analyze the internal device audio for the music lighting. You will not be asked for this permission unless you choose to enable the Audio Visualizer indicator for the ring.
Storage Access: This permission is used to get the color of your wallpaper. You will not be asked for this permission unless you choose to use the color of your wallpaper for the ring.
Notification access: This permission is used to change the color of the ring after notifications
Burn-in concerns: Some Android displays may suffer from mild burn-in if a single item is displayed on the screen for an extremely significant amount of time. If you are concerned about this, feel free to enable the rotation animation in ring settings. That will ensure the display is constantly changing. Alternately, you can disable the default effect to only show the ring while an indicator is being triggered. Note: Samsung Galaxy devices come with burn-in protection that moves the pixels a little each time.
Compatible Devices
- Galaxy S10+
- Galaxy S10
- Galaxy S10e
- Galaxy note 10
- Galaxy note 10+
- Galaxy note 5g
devices to be tested and compatible
oneplus nord
samsung galaxy note 20 series
Download (xda members get free access, will provide unlock codes to any xda member who asks when you ask please specify if you want the code for my navigationbar app or this app as they both have similar names)
https://play.google.com/store/apps/details?id=com.symetium.holepunchcameraeffects
FREQUENTLY ASKED QUESTIONS:
how do i disable individual notifications: currently this is a planned update, you can go into custom colors and set each app you don't want notifying to 100% transparent
light is constantly flashing even if i cleared all notifications: sometimes theres forced notifications such as when you're charging it will force a notification that says you're fast charging, the light will pick up on these you need to hold on these notifications and turn them off to stop the light there should be nothing at all in the notificationpanel, if you still have a flashing light with nothing in the panel contact me.
frozen light: music lighting will disable all other indicators same with battery indicator or battery temp indicator, you need to set custom zones otherwise the light will be frozen, glow also tends to freeze the light so turn that off if it's frozen (this will be fixed in a coming update)
I will test the app as soon as I have the phone tomorrow
This could be exactly what I'm looking for! Could I get an activation key for both please ?
---------- Post added at 10:52 AM ---------- Previous post was at 10:33 AM ----------
I've tried the free version, for now. Can't seem to get the ring elipse-shaped to go around the front camera, also the app keeps crashing on my Nord
Hello,
application works but notification ring appears at the top middle. Could you send me activation code.
App installed but I can't see battery indicator. We need something different from a circle to surround two cameras.. It's possible?
Activation code please.
i like the idea a lot and love the feature where i can preview position etc. But, can it support shapes other than circle? Node does not have circle camera on front. i was hoping that i can overlay on the outer edge of front camera.
Trial time expires,hasn't been able to move ring to the cameras, got notification ring but on the center
Enviado desde mi AC2003 mediante Tapatalk
Looks to work but I can only get it to display a circle ring, which didn't help on a twin camera!
i bought the premium version but can't really use it cause of the shape of the ring. How can i change the shape that it fits the OneplusNord Cam?
Hello. My OP mord just arrived and I can help you with testing
SpeakToMyHand said:
i bought the premium version but can't really use it cause of the shape of the ring. How can i change the shape that it fits the OneplusNord Cam?
Click to expand...
Click to collapse
i have messaged the developer about it you can message him too if you wish to assist him personally @dave7802
https://forum.xda-developers.com/member.php?u=407871
I installed the app on my Oneplus Nord, but I can't adjust it for two cameras hole.
tachinete said:
I installed the app on my Oneplus Nord, but I can't adjust it for two cameras hole.
Click to expand...
Click to collapse
we are working on it right now i am just waiting to hear back from the developer
Looking forward!
activation code please!
Looking forward to the app being updated to cover the Nord's "pill" shape camera module.
Please can I have the activation code whilst awaiting the update? Many thanks.
could i have an unlock code please?
Eagerly waiting for Nord support and please send me activation code.
Moved to Nord! I love this idea. Send me an activation code for the Arc Lighting.
Please send me an activation code too. THX in advance. :good:
This app was initially developed for Samsung Galaxy devices with Always on Display. As OnePlus devices will also get an Always on Display soon i decided to create a version specially for OnePlus devices. For now the app runs in a compatibility mode as the Always on Display has not been released yet. App is in beta stage currently.
You need a notification light / LED for your OnePlus Nord?
With aodNotify you can easily add a notification light / LED to your OnePlus Nord!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your OnePlus Nord or OnePlus 8!
This app hides the fingerprint icon, so the icon can not burn in your screen! Enjoy your notification light!
MAIN FEATURES
• Notification light / LED for OnePlus Nord or OnePlus 8!
• Double tap to wake when notification arrives!
• Charging / Low battery light / LED
MORE FEATURES
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
BATTERY USAGE PER HOUR ~:
• LED - 7.5%
• LED & INTERVAL - 5.5%
• LED & ECO ANIMATION - 3.5%
• LED & ECO ANIMATION & INTERVAL - 2.5%
Without notification light the app consumes almost 0% battery!
DOWNLOAD:
DEVICES
• OnePlus 8
• OnePlus Nord
• OnePlus 7 (untested)??
• OnePlus 6 (untested)??
NOTES
• The app is still in beta stage, errors may occur!!
• OnePlus may block this app with future updates!
• Please check if the app is compatible before updating phone software!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"OnePlus" is a protected trademark of "One Plus Technology Co., Ltd"
Reserved
Latest public beta (join directly from PlayStore) has experimental OnePlus Nord support.
Please reply if the camera cutout is working. You can do some fine adjustment in dimension settings. Will update the position if needed.
Thanks for testing!
How can I move it over the front camera? Can't move it more tothe left...
wonsky21 said:
How can I move it over the front camera? Can't move it more tothe left...
Click to expand...
Click to collapse
seems completely offset. Which resolution do you use on the phone?
Jawomo said:
seems completely offset. Which resolution do you use on the phone?
Click to expand...
Click to collapse
I realized I didn't update to the latest beta. Now it is ok
wonsky21 said:
I realized I didn't update to the latest beta. Now it is ok
Click to expand...
Click to collapse
Does the position need any correction? Or is it perfectly aligned?
I will adjust the presets then.
It was too low and too far to the left. Shape was bad too. These are my settings, it fits perfectly now.
wonsky21 said:
It was too low and too far to the left. Shape was bad too. These are my settings, it fits perfectly now.
Click to expand...
Click to collapse
Could you please set "Resize" to 0% and then check if any "fine tuning" is needed. Or if we can leave "fine tuning" values on 0.
Thanks for testing!
It is HUGE with resize set to 0...
wonsky21 said:
It is HUGE with resize set to 0...
Click to expand...
Click to collapse
You also need to set all values to 0 in fine tuning
When fine tuning settings are set to 0 the app restarts itself
wonsky21 said:
When fine tuning settings are set to 0 the app restarts itself
Click to expand...
Click to collapse
Did you sent the crash report? or isnt there any?
I cleared app data and cache, and set everything again. Now these are my tuned settings
errr .... I'm using this phone with the front camera outside of the screen, no hole in the actual screen, this oval **** drove me crazy.
when tried to set the ofsets to be around the cameras, the phone simply won't use the portion of the screen where the cameras are.
is there anything that can be done with that?
1immortal said:
errr .... I'm using this phone with the front camera outside of the screen, no hole in the actual screen, this oval **** drove me crazy.
when tried to set the ofsets to be around the cameras, the phone simply won't use the portion of the screen where the cameras are.
is there anything that can be done with that?
Click to expand...
Click to collapse
Did you join the beta program from Playstore, and updated to the latest beta? If so, clear app data and cache, and set values from my post, and you'l be fine.
I did, still can't move the ring outside of the screen.
Works like charm.. I just faced a small issue when in lockscreen.
It messes up the tap the screen to show feature in the ambient display. Only double tap works properly, single tap doesn't . Hope this gets fixed in the future updates.
Thanks for the efforts^_^!
Srijith Bharadwaj said:
Works like charm.. I just faced a small issue when in lockscreen.
It messes up the tap the screen to show feature in the ambient display. Only double tap works properly, single tap doesn't . Hope this gets fixed in the future updates.
Thanks for the efforts^_^!
Click to expand...
Click to collapse
Did you need some position fine tuning? or does the camera cutout fit for you?
Yes, ambient display is not supported yet.
Jawomo said:
Did you need some position fine tuning? or does the camera cutout fit for you?
Yes, ambient display is not supported yet.
Click to expand...
Click to collapse
Needed to tune the cutout as it doesn't actually fit perfectly by default.
[BIG UPDATE]
User Adrian got inspired by this and created a Magisk module to make things even easier and without the need to keep apps running on background, check it out!
GitHub
Hey!
I'm in love with my Google Pixel 6 Pro, however, I don't like the screen at all, I wanted to be able to customize how it looks.
Been looking for a way to modify how it looks, CF.lumen fixed the white balance, Sa2ration changes the saturation of your display, you can decrease it all you want, or make it as saturated as you want.
All this apps should/may work on other devices too.
CF.lumen - Apps on Google Play
Adapts your screen's colors based on sun's position, sleep pattern, and sensors
play.google.com
[ROOT] Sa2ration - Apps en Google Play
Alterar su saturación en Android Oreo (descripción leída!)
play.google.com
[Paid app, HBM to use the max brightness of the device without auto brightness]
Enable HBM in app and then enable and disable auto brightness in phone settings, not app settings, that way you will have the absolute maximum brightness of the display, you can enable on the app settings restore hbm after screen off to have it at max brightness always. *There is a QS hbm toggle too*
High Brightness Mode - Apps on Google Play
See your screen in bright sunshine. High brightness mode for your phone
play.google.com
For CF.lumen, enable location, set permissions for the app and do the following:
1 - Location, tap to update or input manually any location, that's only to avoid crashes when manually changing white balance, disable location after that if you don't need it.
2 - Master filter mode, custom, there you can modify RGB values to your taste, I use 0.955 on Red, 0.975 on Green, 1.000 on Blue, but feel free to try until you enjoy how it looks.
Now, for Sa2ration, after installing, simply move the slider until you like that you have, if it does not change, use the setting "enable color management" it's kinda glitchy and may requiere it or not on your device, I use 1.10, really like how it looks!
[Bonus, under developer settings, you can fully hide the display cutout, I also recommend to set the dpi to 410-430 with or without cutout as it will make some landscape animations a single slide instead of two, try pulling down notification panel when landscape mode, try all animations 0.5x too, you may like how it looks, if you see an app crashing disable developer settings as it may create issues like that sometimes]
[Bonus 2, try Iconify magisk module, you can customize your Pixel with that, even enable pure dark oled theme, thanks to Facundo Holzmeister from @howtomen on tiktok!]
GitHub - Mahmud0808/Iconify: Customize Boring Android UI
Customize Boring Android UI. Contribute to Mahmud0808/Iconify development by creating an account on GitHub.
github.com
Hopefully this will be useful for someone, try and enjoy!
I've started trying it out and it really works, thank you very much
遇事不决先百度 said:
I've started trying it out and it really works, thank you very much
Click to expand...
Click to collapse
Thanks! I modified the post a bit and added few extra things, nice to know!^^
Updated some info explaining how to get max extra brightness of the display
I used saturated magisk module and it had a nice effect, can't seem to find it on GitHub now though.
fil3s said:
I used saturated magisk module and it had a nice effect, can't seem to find it on GitHub now though.
Click to expand...
Click to collapse
oh, didn't know about that one, I hope sa2ration is okay for you, I will look for that module tho
Updated again, now with a Magisk module created by Adrian that will make things even better!
Installed the Magis module. There's no user interface for it?
93starletgt said:
Installed the Magis module. There's no user interface for it?
Click to expand...
Click to collapse
Hey, the only way to customize it is to use the service.sh file and modify it before flashing. That's all I know so far.