I have an SGH-1747 on AT&T. I already had the OTA 4.3 update on my phone and I wanted to simply wipe all of the apps off so it was a fresh 4.3 install as it was running slow. I went into the settings and did a factory wipe thinking that would wipe it back to original 4.3 but when it rebooted it hung on the AT&T screen.
I went into Recovery mode and wiped everything to factory refresh from there hoping that would fix it and it made it worse. Now when I reboot i simply get the Firmware upgrade encountered an issue and it asks me to use Kies to go into recovery mode. I did that multiple times and it never worked. Simply kept failing.
I am able to get into Download Mode but I can't seem to find a ODIN version of the 4.3 that I can try to flash it back to. I would love to go back to a 4.2 version if that would work but I stopped before I made it worse. In download mode it says
ODIN MODE
PRODUCT NAME SGH-I747
CUSTOM BINARY DOWNLOAD: YES (2 COUNTS) - Early on with 4.1 i had flash up to 4.2 using ODIN but i have on official AT&T release since
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOM SECUREBOOT: ENABLE
WARRANTY BIT = 1
BOOTLOADER RP SWREV: 2
Any advice out there? I am thinking I soft bricked my phone but I am not sure?
PLEASE HELP!
There is no stock 4.3 AT&T ROM that can be flashed via Odin. You cannot downgrade the bootloader to an older version.
You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
There is no stock 4.3 AT&T ROM that can be flashed via Odin. You cannot downgrade the bootloader to an older version.
You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
Thanks for the info. I actually got it fixed by giving in and going to best buy and the Samsung guys actually were able to flash it to a fresh 4.3 image. They knew it had a non factory image on it in the past based on the counter but they still did it. I'm all fixed now which was awesome.
I just installed the newest firmware for my sm-p607t, which is android 5.1.1. i have tried all auto root methods like cf auto root,kingroot, etc etc. with no luck. I really need root for half my apps i use need it. Is there any way to get root on this newest firmware? It seems like this tablet has been forgotten about and no one seems interested in it anymore.
Maybe you need a permissive kernel like was needed for note 4 5.1.1 firmware..
No clue, but for the life of me I can't get TWRP to stick. As soon as It boots up it reverts back to stock recovery
Can you try to install twrp by odin first? Then you should be able to flash the root zip file.
twrp seems to be for android 4.4 still for the sm-p607t, also just tried it and it wont work either.
I didn't know there was another way to flash Twrp w/out Odin. , I tried flashing TWRP and it says it's flashes successful but Twrp doesn't stick. I suspect that Twrp does work it just gets over written. This also happens on Nexus with stock rom, although with bootloader you can boot directly into recovery, and flash zip and install rom or block stock recovery from sticking
Deleted.
DISCLAIMER: Try this on tour own risk, I am not responsible for fried tablets. Always backup.
At this time there is no root for the new t-mobile 5.11 firmware.
Also on Europe and Asia the P605 lte model of this tablet had the 5.1.1 update and have the same problem.
With this procedure you will have the updated 5.1.1 bootloader,baseband and the most important, root.
But with a 5.02 custom ROM.
The ROM is a port from the P905, galaxy Note Pro 12.2 lte, with added features and the magazine launcher.
This was my ROM before upgrading to 5.1.1.
After checking out the new stock t-mobile 5.1.1 firmware, honestly I was not impressed.
There are 3 small fixes on the ROM's thread, plus search on xda for the stagefright fix and you will have
a perfectly working full featured ROM.
Thanks to Alan-B, the developer.
Flashed the new P607T 5.1.1 firmware with Odin 3.09.
Boot OK and let it alone for 10 minutes. Reboot twice.
Back to download mode.
Flashed TWRP 2.8.6.0-lt03ltexx-4.4 with Odin.
This version of TWRP works OK, it is slow to
start up, but works.
Read that newer versions are having some issues.
Then flashed the Supersu 2.46 zip with TWRP.
Did 3 factory resets and wipe 3 times dalvik, data, system, and cache.
Then flash the zip of the P605 ver. 0.09 Pyrana ROM from the note 10.1 2014 ed. Development section.
Only Roms for the P605 lte tablet are compatible with the P607T.
For me the stock rom bootloops after flashing
Supersu 2.46 with Odin, so better have ready on
the sd card ver 0.09 of the 5.02 Pyrana custom rom.
Flashed it and my P607T boot up OK.
Ver. 0.11 of this ROM did not boot on my tablet,
even after flashing with Odin the boot.img, provided on the OP,
so stick with ver. 0.09 + the fixes.
So far, TWRP 2.8.6.0 recovery and my P607T working perfectly.
so you have Pyrana rom and root? or you have found this method to gain root to the official p607t firmware? (t-mobile android version 5.1.1) Because im seeking the official stock rom with touchwiz plus root. or if someone who can build a stocky rom + root.
The official P607T 5.1.1 firmware bootloops after
flashing supersu 2.46. Not sure if the reason is TWRP 2.8.6.0 or the supersu 2.46 zip not being
compatible with the 5.1.1 stock rom.
Will be good to try supersu 2.49 beta.
After bootlooping my last resource was going back to TWRP and flash the P605 Pyrana ROM.
Prefer to have updated 5.1.1 baseband and root with the 5.02 Pyrana rom than the full stock 5.1.1 rom without root.
After bootlooping my last resource was going back to TWRP and flash the P605 Pyrana ROM.
Prefer to have updated 5.1.1 baseband and root with my 5.02 Pyrana rom than the full stock 5.1.1 rom without root.
same .... Pending a solution boot compatible !!!.
I tried the instructions on Post 144 here: http://forum.xda-developers.com/gala...3215876/page15
It works without doing Step 1 (i.e. on the Stock Tmobile ROM)! All credit goes to @bluecat for doing the work and @M3r71n0 for the English translation!
@sandibhatt - This link is not working for me. Were you able to root 5.1.1? If so can you please re-post a valid link or some instructions? Thank you in advance for your help.
Copy and Pasted from this thread:
http://forum.xda-developers.com/gal...lollipop-5-1-1-galaxy-note-10-t3215876/page15
SHORT SUMMARY FOR ROOT AND RECOVERY MOD FOR FIRMWARE P605XXU1EOI5
TRIP KNOX - TRIP KNOX - TRIP KNOX
1) Download firmware NEE-P605XXU1EOI5 (PDA: P605XXU1EOI5 CSC: P605OXAEOI5 CHANGELIST: 5849447 BUILD DATE: 19.09.2015) [Thanks @Rivendel]
2) Download Kernel with ramdisk mod [Thanks @Blue cat and @Chainfire]
3) Download TWRP-2.8.6.0-lt03ltexx [Thanks teamwin-TWRP]
4) Download BETA SuperSU v2.50 [Thanks @Chainfire]
5) Copy “BETA SuperSU v2.50” in SDCard
6) Flash "Firmware NEE-P605XXU1EOI5" with odin
7) Boot the system/tablet (Probably cannot recognize SIM card/forgets WLAN keys)
8) RE-Flash "Firmware NEE-P605XXU1EOI5" with odin
9) Boot the system/tablet
10) Flash "Kernel with ramdisk mod"
11) Boot the system/tablet
12) (In Odin with Auto Reboot UNCHECK) Flash TWRP-2.8.6.0-lt03ltexx
13) Run system in Recovery and install zip from SDCard "BETA SuperSU v2.50"
14) Boot the system/tablet
End
For those with Wifi or Data issues just reflash your 5.1.1 rom manually until it gets fixed. (Which is basically what steps 1-9 are for)
In short, if you are already on version 5.1.1 do steps 10~14
Exact Step by step:
1. Get into Download Mode
2. Odin Flash the Kernel
3. Reboot and then turn off
4. Go back into Download Mode and flash TWRP Make sure Auto-Reboot is unchecked and after flashing power down manually.
5. Get into recovery using the Button combo. (Note this may take a minute or two for first install)
6. Either Sideload the Beta SuperSU v2.50 or have it on a mSD card or something and flash inside TWRP.
7. Reboot and Enjoy Root!
Also, If you have updated the sofware from T-Mobile (607T) you don't have to reflash the NEE-P605XXU1EOI5 software.
I have been able to get the 5.1.1 installed, updated kernel, SuperSU Beta, and TWRP 2.8.7.0.
Now I keep getting a Security Notice that "unauthorized actions have been detected". I found a suggestion about opening SuperSU and it should fix it, but nothing has worked so far
@sandibhatt & @HermitDash Thank you for your help here guys! This worked perfectly!
problem with root
This root method worked, but did anyone else have an issue with the wifi not storing passwords after reboot?
Possible solutions: tried to find and clear duplicate entries in the wifi config file in the data folder.. but there was no wifi config file.
i have the same issue wifi passwords not storing after wifi on and off or a reboot
---------- Post added at 11:53 PM ---------- Previous post was at 11:20 PM ----------
http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
need the patched boot img for p607t in order to fix wifi passwords, the OP of root tutorial used wrong kernel
also read update 7 to turn it into a odin tar
I was on one of the latest versions of MM, I was trying to downgrade to 5.1.1. When i tried flashing the 5.1.1 it put me in a fail that i cant get back to 6.0.1. The only .tar i could get to flash is the combination flash that is for troubleshooting all sensors and hardware, I cant get twrp, or any other stock 6.0.1 images to flash back on it without fail on Odin 3.12.3. If anyone has any ideas how to proceed from this purgatory much appreciated.
It's back!
After being very persistent with not being able to flash anything but the combination firmware stock binary, I switched to usb port on back of computer, went backward to Odin 3.9.?, flashed an early MM firmware successfully with the help of a Pit file being flashed with stock firmware. Had recurring fails saying ext4 fail. PIT file fixed that. Back to square 1 now. Was on the latest MM,now on Jun 2016 release of MM. Still hoping to unlock bl and root .
Stowincold said:
After being very persistent with not being able to flash anything but the combination firmware stock binary, I switched to usb port on back of computer, went backward to Odin 3.9.?, flashed an early MM firmware successfully with the help of a Pit file being flashed with stock firmware. Had recurring fails saying ext4 fail. PIT file fixed that. Back to square 1 now. Was on the latest MM,now on Jun 2016 release of MM. Still hoping to unlock bl and root .
Click to expand...
Click to collapse
If your bootloader is locked again I think you're going to have to Odin back to BPA1 and do the bootloader unlock process twice again to get back to MM with unlocked bootloader. What's your bootloader now?
Bootloader Is locked, will try to get back to the 5.1.1 again. Thanks
Hi Sir,
Can I flash stock firmware from 910F European version (GSM) after unlocking bootloader on 910V (CDMA)? Or I need permanent root or TWRP.
Because I just want to convert it to GSM phone but full stock without any customise.
Both versions have same hardware.
Please anyone help me. Is it safe conversion?
Hello!
Here is the full N910AUCS2EQE1 Odin manual update to 6.0.1 for everyone to enjoy. You can flash from any current version you have now it doesn't matter whether you are on 4.4.4, 5.1.1 or 6.0.1.
https://www.androidfilehost.com/?fid=745425885120742009
If for whatever reason you want to downgrade or don't like this build, you can safely downgrade to any of the below versions without any issues. After you flash a lower android version using Odin, phone might get stuck on AT&T logo. If that happens, all you need to do is boot into recovery and do a factory wipe/reset and phone will boot right up after that. Make sure you backup your data when upgrading or downgrading firmware so you don't loose any information..
N910AUCS2EPK4 (6.0.1) - https://www.androidfilehost.com/?fid=673368273298964563
N910AUCU2EPH5 (6.0.1) - https://www.androidfilehost.com/?fid=24651430732238073
N910AUCU2DOI2 (5.1.1) - https://www.androidfilehost.com/?fid=24438995911970946
toutanje said:
Hello!
Here is the full N910AUCS2EQE1 Odin manual update to 6.0.1 for everyone to enjoy. You can flash from any current version you have now it doesn't matter whether you are on 4.4.4, 5.1.1 or 6.0.1.
https://www.filehost.com/?fid=745425885120742009
If for whatever reason you want to downgrade or don't like this build, you can safely downgrade to any of the below versions without any issues. After you flash a lower version using Odin, phone might get stuck on AT&T logo. If that happens, all you need to do is boot into recovery and do a factory wipe/reset and phone will boot right up after that. Make sure you backup your data when upgrading or downgrading firmware so you don't loose any information..
N910AUCS2EPK4 (6.0.1) - https://www.filehost.com/?fid=673368273298964563
N910AUCU2EPH5 (6.0.1) - https://www.filehost.com/?fid=24651430732238073
N910AUCU2DOI2 (5.1.1) - https://www.filehost.com/?fid=24438995911970946
Click to expand...
Click to collapse
thx for this!
Got the latest in mine Now. Just got June Security Update this week.
Outside US and not using at&t, we either Odin or sideload when files are available. They not yet available
hi! thanks for this. i am just setting this up for a friend who got a used 910a running 5.0.1 (the horror!!!) so i just use odin to flash the latest directly? its a zip file and has 4 .tar files, which one do i use?
---------- Post added at 08:56 PM ---------- Previous post was at 08:25 PM ----------
cyrarchy said:
hi! thanks for this. i am just setting this up for a friend who got a used 910a running 5.0.1 (the horror!!!) so i just use odin to flash the latest directly? its a zip file and has 4 .tar files, which one do i use?
Click to expand...
Click to collapse
ok flashed all files in the zip and working just fine. Thanks
I was on stock android 9
Downloaded OTA android 10 and installed but got bootloop
Thn downloaded firmware of android 10
And flashed with Odin with Home CSC, flashed successful but still bootloop
Don't want to loose data on the internal
Any way to recover it, i can't trip knox
Also read somewhere that sideload latest OTA will fix it. So anyone can provide OTA or OTA link?
I can't find it anywhere, need OTA file and not odin files.
Please anyone can provide it
You have to do factory reset to get it working.
You have A505F or A505N ? or you have another model ?
Because for 2 models is in this moment. F and N ...
just flash android pie latest version via odin with all 5 files, boot up the phone, copy ur data, factory reset, install 10q via odin with all the files. tested my self on a505f